Page 1 of 3
MATERIAL SAFETY DATA SHEET 1.PRODUCT AND COMPANY IDENTIFICATION PRODUCT’S TRADE NAME:
DMP ETCHING GEL
MANUFACTURER/SUPPLIER:
DMP Ltd. Kalyvion Ave. 190 03 Markopoulo Greece TEL: (+30) 22990 23041 FAX: (+30) 22990 23043 E-MAIL: info@dmp.gr
2. COMPOSITION Chemical characterization:
Acid gel for etching enamel and dentin
Hazardous components:
Phosphoric Acid (35%-40%) CLASS: CAS 7664-38-2 R34
Other components (>10%):
Inorganic filler (silica), Water
3. HAZARD IDENTIFICATION Corrosive R34: Causes burns
4. FIRST AID MEASURES Inhalation: Skin contact: Eye contact: Ingestion:
Expose to fresh air. Seek medical advice. Wash with soap and water. Rinse with plenty of water and seek medical advice. Seek medical advice immediately.
5. FIRE FIGHTING MEASURES Suitable extinguishing media: Unsuitable extinguishing media: Protective equipment:
Product: DMP Etching Gel Department: Research and Development
Water spray, dry chemical foam, carbon dioxide -
Version 2 Date of issue: 01/07/2007
Page 2 of 3
MATERIAL SAFETY DATA SHEET 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Environmental precautions: Methods for cleaning up:
Avoid contact with skin. Wear gloves. Observe local regulations. Rinse with plenty of water, wipe off with cloth.
7. HANDLING AND STORAGE Handling: Storage:
Follow instructions for use. Keep container tightly closed and store in a cool, dry place. Keep out of direct light.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION Avoid eye and skin contact. Hand protection: Gloves Eye protection: Goggles
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Colour: Odour: Boiling Point: Flash Point: Ignition: Explosive Hazard: pH: Viscosity: Water solubility: Vapour pressure:
Gel Blue N.A. N.A. N.A. N.A. N.A. N.A. Very soluble N.A.
10. STABILITY AND REACTIVITY Stability: Conditions to avoid: Hazardous decomposition products:
Stable -
11. TOXICOLOGICAL INFORMATION Severe irritant to eye and skin Irritant to respiratory system
12. ECOLOGICAL INFORMATION N.K.
13. DISPOSAL CONSIDERATIONS Product: DMP Etching Gel Department: Research and Development
Version 2 Date of issue: 01/07/2007
Page 3 of 3
MATERIAL SAFETY DATA SHEET Observe local regulations. Neutralize with plenty of water, and pour down the drain.
14. TRANSPORT INFORMATION No special precautions required. UN number 1805 8/17c(Phosphoric acid)
15. REGULATORY INFORMATION C: R34: S26: S45:
Avoid inhalation, and contact with skin and eyes Causes burns In case of contact with eyes, rinse immediately with water and seek medical advice In case of accident or if you feel unwell, seek medical advice immediately.
16. OTHER INFORMATION The information contained herein describes exclusively the safety requirements of the product and is based on our present-day knowledge. It does not represent a guarantee for the properties of the product described. N.A. = Not applicable N.K. = Not known
Product: DMP Etching Gel Department: Research and Development
Version 2 Date of issue: 01/07/2007