Patience & Nicholson NZ Ltd Price Book 2011-12 by Sutton Tools NZ Ltd

2011-2012

PRICE BOOK

Patience & Nicholson (NZ) Ltd

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KAIAPOI MANUFACTURING, AUCKLAND SALES & DISTRIBUTION Patience and Nicholson (NZ) Ltd is a wholly owned subsidiary of the Melbourne based, family owned company, Sutton Tools Pty Ltd of Australia. Patience and Nicholson (NZ) Ltd have two locations in New Zealand with Manufacturing based at the Kaiapoi, Christchurch site while the Sales, Marketing and Distribution functions are located at the Papakura, Auckland site. Patience and Nicholson (NZ) Ltd was established in 1962 to manufacture a small range of jobber drills for the domestic market. The plant employs many people from the local area which has enabled the company to build a stable and expert workforce in what is a specialised industry. FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

INTRODUCTION It has been another tough year for New Zealand business and I am sure you are all looking forward to an improvement in economic conditions. For those Kiwis who live and trade in the Christchurch/Canterbury region the on-going earthquakes continue to make things very difficult. Our factory is located at Kaiapoi which is just a twenty minute drive from central Christchurch and was one of the worst affected areas after the first earthquake. The earthquakes and aftershocks have certainly had an impact on our employees and it will take a long time for things to return to normal for some of those worst affected. We are very lucky that our factory was largely undamaged and we were able to resume normal production very quickly. Many of you have e-mailed and phoned to show your concern for our staff and our business during this period and we would like to thank you for that support, it is sincerely appreciated. In 2012 Patience & Nicholson (NZ) Ltd will achieve fifty years of manufacturing in New Zealand which is something that we are all very proud of. Despite weaker demand locally we continued to achieve record production volumes throughout 2010/11, and worldwide demand for the best quality High Speed Steel cutting tools is still growing so we are preparing for another busy year. Our 2011 price book contains a lot of changes with product deletions, new products, new or improved ranges and brands, we are trying hard to improve it every year and we hope it will be a useful tool for you and your team. Our website has also had a number of changes this year, we will be regularly updating it with new product information so if you haven’t had a look, make sure you check it out at www.pandn.co.nz. Thank you for your continued support.

Kevin Donovan General Manager Patience & Nicholson (NZ) Ltd

BUY NEW ZEALAND Made When you buy the Jobber Drills, Reduced Shank Drills and Taper Shank Drills that we make here in New Zealand you are getting some of the best cutting tools available in the world. You are not only supporting our business and its employees you are also supporting a wide range of other New Zealand companies that we rely on. We invest many millions of dollars in the New Zealand economy and we appreciate your support and hope that you will continue supporting all things “NZ Made”.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

general conditions of sale Ownership of Goods Ownership of the goods shall only pass onto the buyer on receipt of payment in full. Any goods retrieved or returned in full or part settlement of the debt shall be subject to a minimum restocking fee of 10%. Any goods returned by the buyer must be freighted at the owners expense.

Freight Delivery of all orders with a minimum invoice value of $200.00 nett excluding G.S.T. will be F.I.S. For all orders less than $200.00 a delivery charge will apply.

Payment Terms Payment is due in full on the 20th of the month following invoice. In the event that payment is not received by due date interest may be charged at the rate of 2.5% per month commencing from the due date of payment. The levying of interest shall not extend the due date of payment.

Goods and Services Tax All prices shown in this price list exclude G.S.T.

Claims for Shortages No claims for shortages will be accepted unless the buyer advises the seller in writing within seven days of the receipt of the goods.

Prices & trading terms All prices & trading terms quoted in this Patience and Nicholson price book are a guide only and Patience and Nicholson (NZ) Ltd reserve the right to change or alter pricing within reason and without notice.

Restocking Fee Patience and Nicholson (NZ) Ltd reserve the right to apply a 10% restocking fee should goods be returned due to a clientâ&#x20AC;&#x2122;s incorrect ordering. A Patience and Nicholson sales office employee must be contacted and agreement reached prior to any goods being returned. Any goods accepted back by the seller must be freighted at the buyerâ&#x20AC;&#x2122;s expense.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

CONTENTS Cederberg SNAP-LOC SY STEMS............................................................................................................8

Cigweld MIG & ARC WELDING MACHINES, CONSUMABLES & GAS EQUIPMENT.................. 9 - 11

Diager MASONRY drill & TOOLS..........................................................................................12 - 23

DORCY torches & lighting........................................................................................................24

Egamaster WRENCHES, PLIERS & PLUMBING TOOLS................................................................25 - 27

Evacut ASSORTED CUTTING TOOLS, carbide burrs, HACKSAW BLADES & router cutters...................................................................28 - 61

Eze Lap DIAMOND SHARPENERS....................................................................................................62

Frost DRILL SETS, HOLESAW SETS & MISC TOOLS........................................................... 63 - 65

Garryson ABRASIVES, FLAP WHEELS & slap discs................................................................66 - 71

Huntington DRESSER WHEELS & ACCESSORIES..................................................................................72

Ironclad PROFESSIONAL TASK SPECIFIC GLOVE RANGE........................................................73 - 75

Jamec Pem fastening assortments.......................................................................................76 - 77

Kincrome PROFESSIONAL QUALITY HAND TOOL RANGE, Finkal, Supatool & Chrometech..................................................................................... 78 - 136

LockJaw SELF ADJUSTING LOCKING PLIERS.................................................................................137

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MityVac AUTOMOTIVE KITS & ACCESSORIES.............................................................................. 138

Noga DEBURRING TOOLS, SETS & ACCESSORIES......................................................... 139 - 142

Osborn WIRE BRUSHES for power tools..................................................................... 143 - 145

P&N quickbits & workshop rangeS...................................................................... 146 - 152

PCL TYRE PRESSURE GAUGES & ACCESSORIES.................................................................... 153

PEC ENGINEERS HAND TOOLS & MEASURING EQUIPMENT......................................154 - 156

PG mini ROTARY TOOL BITS & ACCESSORIES.....................................................................157 - 161

Pryor MARKING & PUNCH SETS.....................................................................................162 - 164

Q-Max SHEET METAL PUNCHES.................................................................................................. 165

Recoil THREAD REPAIR SYSTEMS....................................................................................166 - 188

Scangrip LOCKING PLIERS & VICE TOOLS..................................................................................... 189

Sutton DRILL BITS, TAPS, DIES & ASSORTED CUTTING TOOLS.....................................190 - 245

TRADEFLAME Soldering irons & accessories.............................................................................246

Vallorbe ENGINEERS FILES..................................................................................................247 - 249

INDEX..................................................................................................................................................................250 - 256

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SNAP-LOC SYSTEMS

1/4” & 1/2” cooling hose systems

Item No. 1/4” System

SNAP-LOC SYSTEMS

CEDARBERG

SL8525-157

DESCRIPTION

1/4” hose assembly kit which includes; 1 x 13” hose 1 each x 1/16”, 1/8” & 1/4” round nozzles 1 each x 1/8” & 1/4” BSP connectors

Hose

SL8425-21

Grey hose 12” long

Nozzles

SL8425-23 SL8425-24 SL8425-25 SL8425-28 SL8425-188 Connectors & Adaptors

SL8525-100 SL8525-162 SL8525-163 SL8525-167 SL8525-170 SL8525-178 SL8525-180 SL8525-222

Round nozzle 1/16” to 1/4” hose Round nozzle 1/8” to 1/4” hose Round nozzle 1/4” to 1/4” hose Flare nozzle 1” to 1/4” hose Side spray nozzle to 1/4” hose

Y piece 1/4” hose to hose Y piece 1/8” BSP to 1/4” hose Y piece 1/4” BSP to 1/4” hose BSP Connector 1/8” to 1/4” female hose BSP Connector 1/4” to 1/4” female hose BSP Connector 1/8” to 1/4” male hose BSP Connector 1/4” to 1/4” male hose Hose to hose 1/4” double socket - female

1/2” System

SL8550-175

1/2” hose assembly kit which includes; 1 x 13” hose 1 each x 1/4”, 3/8” & 1/2” round nozzles 1 each x 3/8” & 1/2” BSP connectors

Hose

SL8450-21

Grey hose 12” long

Nozzles

SL8450-23 SL8450-24 SL8450-25 SL8450-28 SL8450-202

Round nozzle 1/4” to 1/2” hose Round nozzle 3/8” to 1/2” hose Round nozzle 1/2” to 1/2” hose Flare nozzle 2” to 1/2” hose Side spray nozzle to 1/2” hose

Connectors & Adaptors

SL8450-20 SL8550-100 SL8550-165 SL8550-167

Reducer adaptor 1/2” hose to 1/4” hose Y piece 1/2” hose to hose BSP Connector 3/8” to 1/2” male hose BSP Connector 1/2” to 1/2” male hose

ASSEMBLY PLIERS

SL8701-006 SL8701-007

1/4" System Pliers 1/2" System Pliers

Plastic Ball Valves

SL8525-353 SL8550-409

1/4” NPT Ball valve 1/2” NPT Ball valve

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MIG & ARC WELDING

CIGWELD

MIG & ARC WELDING

MACHINES, CONSUMABLES & accessories

Item No. MANUAL ARC WELDING MACHINES

DESCRIPTION

CW1001900 CW1001901 CW1002000 CW620467

Weldskill Inverter Arc Welder 130 - Plug 10A Weldskill Inverter Arc Welder 170 - Plug 15A Weldskill Arc Welder 120 Turbo - Plug 10A Easywelder Transarc Turbo 35-170A - Plug 15A

MANUAL ARC WELDING ACCESSORIES

CW646215 CWC200R CWCEH250TL

Welders Spring Handle Chipping Hammer 200A Spring Loaded Earth Work Clamp Weldskill 250A Arc Twistlock Welding Electrode Holder

MANUAL ARC WELDING ELECTRODES

CW322128 CW322135 CW322136 CW612182 CW612183 CWSP12125 CWSP12132 CWSP12251 CWSP12321

Ferrocraft 12XP General Purpose Electrode 2.0mm, 40-70A, Handipak - while stocks last Satincraft 13 General Purpose Electrode 2.5mm, 55-90A, 1Kg Satincraft 13 General Purpose Electrode 3.2mm, 90-135A, 1Kg Satincraft 13 General Purpose Electrode 2.5mm, 55-90A, 2.5Kg Satincraft 13 General Purpose Electrode 3.2mm, 90-135A, 2.5Kg Speedex 12 General Purpose Electrode 2.5mm, 55-80A, 2.5Kg - while stocks last Speedex 12 General Purpose Electrode 3.2mm, 90-130A, 2.5Kg - while stocks last Speedex 12 General Purpose Electrode 2.5mm, 55-80A, 1Kg - while stocks last Speedex 12 General Purpose Electrode 3.2mm, 90-130A, 1Kg - while stocks last

MIG WELDING MACHINES

CW1004100 CW1004135

Weldskill 100 MIG Portable Gasless Welding Machine Weldskill 135 MIG Portable Welding Machine

SINGLE PHASE MIG WELDING EQUIPMENT

CW706555 CW710000

Transmig 165 30-165A Transmig 200 30-200A 15A

MIG TORCH CONSUMABLES

CWOTW1123R CWOTW1130R CWOTW1135R

MIG Contact Tip 0.6mm Packet of 5 MIG Contact Tip 0.8mm Packet of 5 MIG Contact Tip 0.9mm Packet of 5

MIG WELDING WIRES

CW721104 CW721105 CW721108 CW721109 CW721956 CW721976

Autocraft LW1-6 Mild Steel Gas MIG Wire 0.6mm-0.8Kg Autocraft LW1-6 Mild Steel Gas MIG Wire 0.8mm-0.8Kg Autocraft LW1-6 Mild Steel Gas MIG Wire 0.6mm-5Kg Autocraft LW1-6 Mild Steel Gas MIG Wire 0.8mm-5Kg Shield-Cor 15 Mild Steel Gasless MIG Wire 0.8mm-0.45Kg Shield-Cor 15 Mild Steel Gasless MIG Wire 0.9mm-0.45Kg

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

cutting & welding

Gas kit, ACCESSORIES & safety equipment

Item No. GAS CUTTING & WELDING KITS

DESCRIPTION

CW208006

Cutskill Tradesman Cutting & Welding Kit Oxy/Acetylene Gas COMET 3 Mixer Type 550 Oxy/Acetylene or Oxy/LP Welding Mixer COMET Welding Tip Oxy/Acetylene Type 551 No.8 COMET Welding Tip Oxy/Acetylene Type 551 No.10 COMET Welding Tip Oxy/Acetylene Type 551 No.12 COMET Welding Tip Oxy/Acetylene Type 551 No.15 Tip Cleaner Set for cutting and welding tips contains eleven wires and a file in a metal case COMET Fitted Oxy/Acetylene Twin Hose Kit 15m, 5/8-18 AS1335 (UNF fittings) COMET Fitted Oxy/Acetylene Twin Hose Kit 5m, 5/8-18 AS1335 (UNF fittings) Flashback Arrestor F6 Oxygen Blowpipe Mounted Blue Flashback Arrestor F6 Acetylene Fuel Blowpipe Mounted Red Single Gas Welding Flint Lighter Hose Connection Kit Oxy/Acetylene 5mm 5/8-18 UNF RH Hose Connection Kit Oxy/Acetylene 5mm Screw Type 5/8-18 UNF LH

REGULATORS

CW301604 CW301605

COMET 500 Oxygen Reg Twin Gauges 400kPa COMET 500 Acetylene Reg Twin Gauges 150kPa

BLOWPIPE & ATTACHMENT

CW304001 CW304005

COMET 3 Oxy/Acetylene Blowpipe Heavy Duty COMET 3 Oxy/Acetylene Cutting Attachment

SAFETY EQUIPMENT

CW454031 CW454305 CW454308 CW454309 CW454310 CW454311

Lift Front Oxy/Acetylene Welding Goggle Weldskill Auto-Darkening Helmet Variable Shade 9-13 Blue Weldskill Front Cover Lens to suit Auto Darkening Helmet Weldskill Rear Cover Lens to suit Auto Darkening Helmet Harness Assembly Weldskill Auto Darkening Helmet Sweat Band Weldskill Auto Darkening Helmet

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

CIGWELD

CW304002 CW307000 CW307001 CW307002 CW307003 CW308036 CW308624 CW308693 CW308777 CW308778 CW308789 CWLP112 CWLP240

CUTTING & WELDING

GAS CUTTING & WELDING ACCESSORIESt

DIAGER

Diager products have been manufactured in France for over 55 years. Diager distinguishes itself from its competitors by its commitment to innovative design and constant product improvement. Diager manufacture an extensive range of premium high end tungsten carbide, masonry cutting tools for the Construction Industry.

DIAGER contents

Masonry Twister SDS Plus & Booster SDS Plus Drills....................................14 - 16

Masonry Ultimax Drills............................................. 17

Masonry Core Bits.....................................................18

Masonry Multifit Drills.............................................19

Masonry Drill Sets......................................................19

Chisels......................................................................... 20 Chisel Selection Guide..............................................................21 Diager Technical Section..................................................22 - 23

DIAGER

MASONRY DRILLS

TWISTER SDS PLUS & BOOSTER SDS PLUS

material

tungsten carbide tipped

surface finish

sand blasted Twister SDS plus

DIAGER

MASONRY DRILLS

Dia. (mm)

OAL (mm)

Item No.

booster SDS plus Dia. (mm)

OAL (mm)

Item No.

6 6.5 8 10

110 110 110 110

S370113112 S370113113 S370113116 S370113120

6 6.5

160 160

S370113212 S370113213

160

S370113216

160

S370113220

12 13 14

160 160 160

S370113224 S370113226 S370113228

6 6.5 8 10 12 13 14 16 18 20

210 210 210 210 210 210 210 210 210 210

S370113312 S370113313 S370113316 S370113320 S370113324 S370113326 S370113328 S370113332 S370113336 S370113340

Hammer Drill

5 110 S370110010 5.5 110 S370110011 6 110 S370110012 6.5 110 S370110013 8 110 S370110016 10 110 S370110020 5 160 S370110110 5.5 160 S370110111 6 160 S370110112 6.5 160 S370110113 7 160 S370110114 8 160 S370110116 9 160 S370110118 10 160 S370110120 11 160 S370110122 12 160 S370110124 13 160 S370110126 14 160 S370110128 15 160 S370110130 16 160 S370110132 6 210 S370110212 6.5 210 S370110213 8 210 S370110216 10 210 S370110220 12 210 S370110224 13 210 S370110226 14 210 S370110228 16 210 S370110232 18 210 S370110236 20 210 S370110240 22 210 S370110244 24 210 S370110248 25 210 S370110250 *Refer to Diager technical section for further information.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MASONRY DRILLS

TWISTER SDS PLUS & BOOSTER SDS PLUS

material

tungsten carbide tipped

surface finish

sand blasted Twister SDS plus

Dia. (mm)

OAL (mm)

Item No.

booster SDS plus Dia. (mm)

OAL (mm)

Item No.

6 6.5 8 10 12

310 310 310 310 310

S370113412 S370113413 S370113416 S370113420 S370113424

14 16 18 20

310 310 310 310

S370113428 S370113432 S370113436 S370113440

DIAGER

6 260 S370110312 6.5 260 S370110313 8 260 S370110316 10 260 S370110320 12 260 S370110324 13 260 S370110326 14 260 S370110328 16 260 S370110332 18 260 S370110336 20 260 S370110340 22 260 S370110344 24 260 S370110348 25 260 S370110350 6 310 S370110412 6.5 310 8 310 S370110416 10 310 S370110420 12 310 S370110424 13 310 S370110426 14 310 S370110428 16 310 S370110432 18 310 S370110436 20 310 S370110440 22 310 S370110444 24 310 S370110448 25 310 S370110450 *Refer to Diager technical section for further information.

MASONRY DRILLS

Hammer Drill

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MASONRY DRILLS

TWISTER SDS PLUS & BOOSTER SDS PLUS

material

tungsten carbide tipped

surface finish

sand blasted Twister SDS plus

DIAGER

MASONRY DRILLS

Dia. (mm)

OAL (mm)

Item No.

booster SDS plus Dia. (mm)

OAL (mm)

Item No.

8 10 12

460 460 460

S370113516 S370113520 S370113524

14 16 18 20

460 460 460 460

S370113528 S370113532 S370113536 S370113540

Hammer Drill

8 410 S370110616 10 410 S370110620 12 410 S370110624 13 410 S370110626 14 410 S370110628 16 410 S370110632 18 410 S370110636 20 410 S370110640 22 410 S370110644 24 410 S370110648 25 410 S370110650 8 460 S370110716 10 460 S370110720 12 460 S370110724 13 460 S370110726 14 460 S370110728 16 460 S370110732 18 460 S370110736 20 460 S370110740 22 460 S370110744 24 460 S370110748 25 460 S370110750 8 610 S370110816 10 610 S370110820 12 610 S370110824 13 610 S370110826 14 610 S370110828 16 610 S370110832 18 610 S370110836 20 610 S370110840 22 610 S370110844 24 610 S370110848 25 610 S370110850 8 1000 S370110916 10 1000 S370110920 12 1000 S370110924 14 1000 S370110928 16 1000 S370110932 18 1000 S370110936 20 1000 S370110940 *Refer to Diager technical section for further information.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MASONRY DRILLS UTIMAX

material

tungsten carbide tipped

surface finish

sand blasted

OAL (mm)

Item No.

Dia. (mm)

OAL (mm)

Item No.

16 18 20 22 25 28 30 32 36 38 40 42 45 16 18 20 22 25 26 28 30 32 36 38 40 42 45 20 22 25 28 32 35 36 42 45

340 340 340 340 340 340 340 340 340 340 340 340 340 690 690 690 690 690 690 690 690 690 690 690 690 690 690 1300 1300 1300 1300 1300 1300 1300 1300 1300

S370166132 S370166136 S370166140 S370166144 S370166150 S370166156 S370166160 S370166164 S370166172 S370166176 S370166180 S370166184 S370166190 S370166332 S370166336 S370166340 S370166344 S370166350 S370166352 S370166356 S370166360 S370166364 S370166372 S370166376 S370166380 S370166384 S370166390 S370166540 S370166544 S370166550 S370166556 S370166564 S370166570 S370166572 S370166584 S370166590

16 18 20 22 25 28 30 32 36 38 40 42 45 16 18 20 22 25

540 540 540 540 540 540 540 540 540 540 540 540 540 920 920 920 920 920

S370166232 S370166236 S370166240 S370166244 S370166250 S370166256 S370166260 S370166264 S370166272 S370166276 S370166280 S370166284 S370166290 S370166432 S370166436 S370166440 S370166444 S370166450

28 30 32 36

920 920 920 920

S370166456 S370166460 S370166464 S370166472

40 42 45 20

920 920 920 1500

S370166480 S370166484 S370166490 S370166640

25 28 32 36 40 42 45

1500 1500 1500 1500 1500 1500 1500

S370166650 S370166656 S370166664 S370166672 S370166680 S370166684 S370166690

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DIAGER

Dia. (mm) ULTIMAX

MASONRY DRILLS

ULTIMAX

MASONRY CORE BITS SDS PLUS & SDS MAX

MATERIAL

High Tensile Body, Tungsten Carbide Tipped

SURFACE FINISH

SAND BLASTED

Shank

Dia. (mm)

Working Length

Teeth

Item No.

90 90 90 90 90 90 90 90 90 90 90 90 90

5 5 6 6 7 8 8 8 9 10 11 11 12

S370300030 S370300035 S370300040 S370300045 S370300050 S370300060 S370300066 S370300070 S370300080 S370300090 S370300100 S370300110 S370300125

220 420 700 900

S370330220 S370330420 S370330700 S370330900

DIAGER

MASONRY CORE BITS

HEAVY DUTY CORE BITS FOR TAPER HAMMER CROWN CORE BITS

SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max SDS Max

30 35 40 45 50 60 66 70 80 90 100 110 125

HEAVY DUTY ADAPTORS FOR TAPER HAMMER CROWN CORE BITS

SDS Max SDS Max SDS Max SDS Max HEAVY DUTY PILOT DRILL

11 x 120

Taper centering drill bit

S370302000

HEAVY DUTY DRIFT KEY S370303000 LIGHT DUTY CORE BITS

SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus

25 30 35 40 45 50 60 66 68 70 80 90

60 60 60 60 60 60 60 60 60 60 60 60

5 5 5 6 6 7 8 8 8 8 9 10

S370326025 S370326030 S370326035 S370326040 S370326045 S370326050 S370326060 S370326066 S370326068 S370326070 S370326080 S370326090

90 150 200 300

S370328090 S370328150 S370328200 S370328300

LIGHT DUTY CORE BIT ADAPTORS

SDS Plus SDS Plus SDS Plus SDS Plus

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MASONRY DRILLS & SETS

twister multifit sds sets & masonry drill sets

SAND BLASTED

o/a length

110

160

210

260

410

flute length

150

200

350

Dia. (mm)

Item No.

S370764020 S370764024 S370764026 S370764028 S370764032

S370765020 S370765024 S370765026

S370764040 S370764044 S370764048

S370765040 S370765044

S370764050

S370765050

5 5.5 6 6.5 7 8 10 12 13 14 16 18 20 22 24

S370761010 S370761011 S370761012 S370761013 S370761014 S370761016 S370761020

S370762010 S370762011 S370762012 S370762013 S370762014 S370762016 S370762020 S370762024 S370762026 S370762028 S370762032

DIAGER

TWISTER MULTI - FIT SDS

S370763012 S370763013 S370763016 S370763020 S370763024 S370763026 S370763028 S370763032 S370763036 S370763040

25 *Refer to Diager technical section for further information.

S370765032

Masonry Drill Sets MATERIAL

Tungsten Carbide Tipped

SURFACE FINISH

Sand Blasted

SET

CONTENTS

FLUTE LENGTH

136C Twister Plus Hammer Drill Set

6, 8 6, 8, 10 5, 6, 8 6, 8, 10, 12 6, 8 6, 8, 10 6, 8, 10 6, 8, 10, 12

110 160 110 160 110 160 110 160

102C Twister Plus Hammer Drill Set 104B Booster Plus Hammer Drill Set 113D Booster Plus Hammer Drill Set

MASONRY DRILLS & SETS

surface finish

CASE

PIECES

Item No.

Plastic

S370900136

Plastic

S370900102

Plastic

S370900104

Metal

S370900113

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Size (mm)

Length (MM)

Description

Item No.

CHISELS

DIAGER

SDS PLUS CHISELS

14 20 40 40 22

250 250 200 200 250

Pointed Flat Flat Angled Concrete Chasing

S370322014 S370318020 S370318040 S370348040 S370311022

280 400 600 280 400 600 300 300 280 300

Pointed Pointed Pointed Flat Flat Flat Flat Angled Toothed Concrete Chasing

S370342018 S370342118 S370342218 S370343024 S370343124 S370343224 S370343080 S370349050 S370361040 S370311026

SDS MAX CHISELS

18 18 18 24 24 24 80 50 40 26

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Concrete Chasing

Brick Chasing

Angled

Flat

Pointed

CHISELS

Toothed

TECHNICAL SECTION

CHISEL SELECTION GUIDE Pointed Chisel For Hammer Drills

Body • Treated high-tensile steel.

Applications • For all demolition work, a triangular point, the angle which provides better penetration in material.

Bolster

Flat Chisel

Applications More significant rubble clearing. Characteristics: cutting effect, cutting edge width up to 115mm.

Applications All demolition work, perfect for removing material, (example: remove facade covering). Characteristics: standard tool, cutting effect.

Brick Chasing Chisel

Toothed Chisel (carbide tips)

Applications • Digging channels in brick and argilocalite materials. • Aileron providing a guide for alignment and depth of the channel to be dug. Body • High-tensile steel. • Wide cutting edge.

Applications • Joint removal for the purpose of recovering bricks, stones etc... Body • Brazen tungsten carbide teeth. • High-tensile steel. • Wide cutting edge.

Angled Bolster

Concrete Chasing Chisel

Applications • Tile removal. Body • High-tensile steel. • Wide cutting edge.

Applications • Digging channels in concrete. Body • High-tensile steel. • Wide cutting edge.

For Hammer Drills

TECHNICAL SECTION

MASONRY BOOSTER SDS - PLUS

FLUTE

Suggested speed in b50 concrete, using a 2 to 4 Kg class hammer drill.

• 3 flutes that combine a compression passage and a depression chamber to accelerate the expulsion of dust.

end-user tips

nonconformist Above and beyond the normal standards and quite simply unique, the DIAGER Booster-plus is the all-concrete solution for professionals equipped with SDSplus drilling machines. It stands up to reinforced steel and drills concentric holes. Its sturdiness gives it a life expectancy which is clearly better than that of traditional drills.

For deep drilling: always drill a pilot of the same diameter. The drill should be removed from the hole every 10 seconds. To deep through reinforcing steel: all drilling through reinfored concrete must be approved by a structiral engineer or similary qualified authority.

ref 113

FOR ROTARY HAMMER DRILLS - for drilling Reinforced concrete, concrete, marble, granite, brick, stone & CSrTM Hebel®

TIP • One-piece triple cutting edges • Withstands reinforcing steel • Chisel effect

RPM 900 800 700 600 500 400 300 200 ø3

ø6

ø9

Performance Level Plaster Brick Stone Hard stone Concrete Reinforced concrete Granite Ceramic Glass Product pluses Savings Speed Longevity Power Up to 1500 holes in b50 (withstands contact with reinforced steel)

ø12

ø15

ø18

ø21

ø24

ø27

ø30 ++++ ++++ ++++ ++++ ++++ ++++ ++++ ++

+++ +++ ++++ ++++

TECHNICAL SECTION

MASONRY TWISTER SDS - PLUS & MULTI - FIT FOR ROTARY HAMMER DRILLS - for drilling concrete, bricks, stone, CSRTM Hebel®

Fastest penetrating drill on the market - Guaranteed

FLUTE Suggested speed in b50 concrete, using a 2 to 4 Kg class hammer drill.

high speed generation

end-user tips For deep drilling: always drill a pilot of the same diameter. The drill should be removed from the hole every 10 seconds.

In 2001, a hurricane blew through the concrete drill market. The DIAGER Twister-plus is the first drill bit for hammer drills, whose innovations have created a precedent among manufacturers:

TIP

• precision: self centering point for a pilot hole.

• Breaks concrete • Self-centering tip-angle 160˚ • Chisel effect to shatter concrete

• power: the 160˚ angle of the tip, nearly flat, increases the impact tenfold and penetrates the concrete more quickly.

ref 110

• Accelerated dust removal by means of a compression passage, followed by a depression chamber

• speed: the DIAGER Twister-plus square flute style accelerates dust disposal.

RPM 900 800 700 600 500 400 300 200 ø3

ø6

ø9

ø12

ø15

ø18

ø21

ø24

ø27

ø30

Performance Level Plaster Brick Stone Hard stone Concrete Reinforced concrete Granite Ceramic Glass

++++ ++++ ++++ +++ ++++ ++ ++ ++ +

Product pluses Savings Speed Longevity Power

++++ ++++ +++ +++

30% faster, depending of the material. 8x160: a minimum of 500 holes (under ideal drilling conditions)

TORCHES & LIGHTING

DORCY

TORCHES & LIGHTING

Item No.

DESCRIPTION

DOD1019 Focusing Spotlight Lantern 4D DOD1070 Motion Sensor LED Stair/Area Light 3C DOD1071 Motion Sensor LED Floodlight 3D DOD2504 3 Led Optic Flashlight 3AAA DOD3985 Gel Brite Flashlight Combo 3 Piece DOD4240 9 Led Flashlight 3AAA DOD6407 LED Glow Stick* *Price is per Glow Stick - orders must be placed in quantites of 20 (supplied in a handy, disposable counter merchandiser)

DOD3985

DOD6407

DOD1019

DOD1070

DOD1071

DOD2504

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

WRENCHES & PLIERS

DESCRIPTION

EG61015 EG64036 EG61109 EG61110 EG61029 EG61111 EG62339 EG62343 EG62340 EG62332 EG61112 EG62344 EG61030 EG62333 EG64038 EG61031 EG61016 EG62347 EG62479 EG61017 EG61032 EG62446 EG61113 EG62211 EG61008 EG62348 EG62447 EG61024 EG61480 EG61035 EG61481 EG61047 EG61018 EG61009 EG61025 EG61114 EG61033 EG62108 EG61019 EG61034 EG61026 EG61115 EG61116 EG61020 EG61027 EG61021 EG61028

Pipe Wrench Heavy Duty 10" Replacement Strap 8"For 61481 Adjustable Wrench Titacrom 4" Adjustable Wrench Titacrom 6” Pipe Wrench Heavy Duty Offset 8” Adjustable Wrench Titacrom 8” Plier Long Nose Titacrom 160mm Plier Diagonal Cutter Titacrom 160mm Plier Long Nose Titacrom 200mm Plier Universal Titacrom 180mm Adjustable Wrench Titacrom 10” Plier Diagonal Cutter Titacrom 180mm Pipe Wrench Heavy Duty Offset 10” Plier Universal Titacrom 200mm Replacement Chain For 61035 Pipe Wrench Heavy Duty Offset 12” Pipe Wrench Heavy Duty 12" Plier End Nipper Titacrom 180mm Plier Universal Heavy Duty Titacrom 210mm Pipe Wrench Heavy Duty 14" Pipe Wrench Heavy Duty Offset 14" Plier Groove Joint Titacrom 10"/250mm Adjustable Wrench Titacrom 12” Plier Fencing Titacrom 250mm Basin Wrench 10-32 Diameter 290mm Plier End Nipper Titacrom 200mm Plier Groove Joint Titacrom 12"/300mm Aluminium Pipe Wrench Heavy Duty 14” Strap Wrench 3" Cap. Chain Pipe Wrench 115Mm Cap. Strap Wrench 8" Cap. Swedish Pipe Wrench 1.1/2” Cap. Pipe Wrench Heavy Duty 18" Basin Wrench 10-32 Diameter 460mm Aluminium Pipe Wrench Heavy Duty 18” Adjustable Wrench Titacrom 15” Pipe Wrench Heavy Duty Offset 18" Groove Joint Plier 16” Pipe Wrench Heavy Duty 24” Pipe Wrench Heavy Duty Offset 24” Aluminium Pipe Wrench Heavy Duty 24” Adjustable Wrench Titacrom 18" Adjustable Wrench Titacrom 24" Pipe Wrench Heavy Duty 36” Aluminium Pipe Wrench Heavy Duty 36” Pipe Wrench Heavy Duty 48” ( Capacity 5”) Aluminium Pipe Wrench Heavy Duty 48"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EGAMASTER

Item No.

WRENCHES & PLIERS

PIPE WRENCHES, ADJUSTABLE WRENCHES & PLIERS

WRENCHES & PIPE TOOLS

EGAMASTER

WRENCHES & PIPE TOOLS

SLOGGING WRENCHES, PIPE THREADING & PIPE CUTTING TOOLS

Item No.

DESCRIPTION

EG60883 EG60884 EG60885 EG60886 EG60888 EG60889 EG60890 EG60891 EG60939 EG60940 EG60941 EG60942 EG60984 EG60985 EG60986 EG60987 EG60988 EG60989 EG60990 EG60991 EG60992 EG60993 EG60994 EG61008 EG61009 EG63000 EG63001 EG63002 EG63003 EG63004 EG63005 EG63006 EG63008 EG63009 EG63010 EG80833 EG63052 EG63053 EG63054 EG63055 EG80833 EG63022 EG63025 EG63132 EG63085

Slogging Ring Wrench 30mm Slogging Ring Wrench 32mm Slogging Ring Wrench 36mm Slogging Ring Wrench 41mm Slogging Ring Wrench 46mm Slogging Ring Wrench 50mm Slogging Ring Wrench 55mm Slogging Ring Wrench 60mm Slogging Ring Wrench 65mm Slogging Ring Wrench 70mm Slogging Ring Wrench 75mm Slogging Ring Wrench 80mm Slogging Ring Wrench 1.1/16" Slogging Ring Wrench 1.3/16" Slogging Ring Wrench 1.1/4" Slogging Ring Wrench 1.5/8" Slogging Ring Wrench 1.13/16" Slogging Ring Wrench 2" Slogging Ring Wrench 2.3/8" Slogging Ring Wrench 2.9/16" Slogging Ring Wrench 2.3/4" Slogging Ring Wrench 2.15/16" Slogging Ring Wrench 3" Basin Wrench 10-32 Dia. 290Mm Basin Wrench 10-32 Dia. 460Mm Die Head Ratchet Handle 1/4 – 1.1/4” Die Head 1/4” Bspt Die Head 3/8” Bspt Die Head 1/2” Bspt Die Head 3/4” Bspt Die Head 1” Bspt Die Head 1.1/4” Bspt Die Head 1.1.2” Bspt Die Head 2” Bspt Die Head Ratchet Handle 1.1/4 – 2” Die Head Adaptor Die Set 1/2” Npt Die Set 3/4” Npt Die Set 1” Npt Die Set 1.1/4” Npt Die Head Adaptor Threading Kit 1/2” – 1.1/4” Bspt Threading Kit 1/2” – 1” Bspt Threading Kit 1/2” – 2” Bspt Tube & Pipe Reamer Up To 40mm Tube

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PIPE TOOLS

DESCRIPTION

EG63094 EG63101 EG63105 EG63106 EG63110 EG63111 EG63113 EG63114 EG62190

Classic Tube Cutter 30mm For S/S Tube Cutter Wheels For 63172 Pr Tube Cutter Telescopic 3-32mm Mini Tube Cutter 22mm Cutter Wheels For 63104/5/6 Pr Cutter Wheels 63119/107/123 Pr Cutter Wheels S/S Tube For 63094 Pr Cutter Wheels S/S Tube For 63119 Pr

EG62201 EG62202 EG62203 EG62204 EG62205 EG63119 EG63170 EG63172 EG63200 EG64056 EG64057 EG64058 EG64059 EG64060 EG68001 EG68003 EG68005 EG68006 EG68008 EG68010 EG68011 EG68012 EG68013 EG68110 EG68111 EG68115 EG68116

Bolt Cutter Set 9 Pce Bolt Cutter 14"/350mm Bolt Cutter 18"/450mm Bolt Cutter 24"/600mm Bolt Cutter 30"/750mm Bolt Cutter 36"/900mm Tube Cutter Telescopic 6-42mm Classic Tube Cutter 32mm Steel Pipe Cutter 1/8 – 2” Plastic Pipe Cutter 42mm Bolt Cutter Jaws 14"/350mm Bolt Cutter Jaws 18"/450mm Bolt Cutter Jaws 24"/600mm Bolt Cutter Jaws 30"/750mm Bolt Cutter Jaws 36"/900mm Flaring Tool Bar Type 3/16-5/8” Flaring Tool Bar Type 4-14mm Tube Bender 1/4” Tube Bender 3/8” Tube Bender 1/2” Tube Bender 6mm Tube Bender 8mm,5/16" Tube Bender 10mm Tube Bender 12mm Tube Bender 1/8,3/16,1/4" Tube Bender 1/4,5/16,3/8" & 6, 8, 10mm Tube Bender 12, 15, 18, 22mm Tube Bender 15, 18, 22mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PIPE TOOLS

Item No.

EGAMASTER

tube benders, bolt cutters & flaring tool bars

EVACUT

Professional Quality Cutting – IncludinginJobber Stub55 & Panel Long Series Drills, itself Reduced Shank Drills, Drill Diager products have beenTools manufactured FranceDrills, for over years.Drills, Diager distinguishes from its competitors Sets, Shank Drills, Masonry Drills, Spade Auger product Bits, Carbide Burs, Hacksaw Blades & Router Bits. Brand Overview: by itsTaper commitment to innovative design andBits, constant improvement. Diager manufacture an extensive range The Evacut range professional quality cutting toolscutting includes a comprehensive selectionIndustry. of precision cutting tools. of premium highofend tungsten carbide, masonry tools for the Construction

Evacut contents

Jobber Drills, Stub & Panel Drills, Long Series Drills & Extra Long Deep Hole Drills.............30 - 38

Masonry Drills & Set................................................44

Spade Bits & Sets....................................................45

3/8” Reduced Shank Drills & 1/2” Reduced Shank Drills..............................39 - 41

Auger Bits..................................................................46

Drill Set Guide...........................................................42

Toolbits...................................................................... 47

Drill Sets....................................................................43

Hacksaw Blades.......................................................48

EVACUT

The range of Silver, Black Jet and Cobalt Jobber Drills, Stub and panel drills and Reduced Shank drills are Manufactured right here in Kaiapoi, New Zealand.

Powersaw Blades...................................................49

Drill & Tapping Chart..............................................................58

Carbide Burs & Sets.......................................50 - 53

Drill use & Maintenance........................................................59

Router Bits.......................................................54 - 56

Twist Trill Technical Section.........................................60 - 61

Drill Selection Chart............................................................... 57

SILVER BLACK JET

JOBBER DRILLS

COBALT

*Up to 5.0mm - 10 pieces, 5.1mm to 5.4mm - 5 pieces, 5.5mm - 10mm pieces, 5.6mm to 5.9mm - 5 pieces, 6mm -10 pieces, 6.1mm to 6.4mm - 5 pieces, 6.5mm - 10 pieces, 6.6mm to 13.0mm - 5 pieces. Up to 17/64” - 10 pieces, 9/32 to 1/2”- 5 pieces

SURFACE FINISH

SILVER

COBALT

PACKAGING

BULK

PREPACK

HSS

HSS Co.5

ORDER QTY

JOBBER DRILLS

SILVER

MATERIAL

DIA (INCH)

EVACUT

BLACK JET

*as above

DIA (MM)

Item No.

0.35

104635 101016 104640 104645 104650 104655 104817 104826 104833 104850 101028 104868 104876 104884 104892 105007 105015 105023 105031 101036 105058 105066 105074 105082 105090 105104 105112 105120 101044 105139 105147 105155 105163 105171 105198 105201 105228 101052 105236 105244 105252

113573 113576 113579 113581 101389 113583 113586 113589 113592 113595 113598 113646 113650 101397 113653 113656 113659 113662 113665 113668 113671 113674 101400 113697 113699 113701

106593

108011

1/64 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 1/32 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 3/64 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1/16 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 5/64 2.00 2.05 2.10

102507

106658

108020

102083

102511

102091 106704

102520 108029

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SILVER BLACK JET

JOBBER DRILLS

COBALT

SURFACE FINISH

SILVER

BLACK JET

SILVER

COBALT

PACKAGING

BULK

PREPACK

MATERIAL

HSS

HSS Co.5

*as above

DIA (MM)

Item No.

2.15 2.20 2.25 2.30 2.35

105260 105279 105287 105295 105309 101060 105317 105325 105333 105341 105368 105376 105384 105392 101079 105406 105414 105422 105430 105449 105457 101087 105465 105473 105481 105503 101095 105511 105538 105546 105554 101109 105562 105570 105589

113704 113707 113710 113713 113716 101419 113719 113722 113743 113746 113749 113752 113755 113758 101427 113761 113764 113767 113770 113808 113811 101435 113810 113814 113820 113859 101443 113862 113867 113873 113878 101451 113905 113908 113913 113921 113924 113933 101478 113964 113969 113973

102105

102523

106755

108038

102113

102526

106828

108047

102121

102529

106879 102148

108056 102538

102156 106925

102547 108065

102164 106984

102556 108074

3/32 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 7/64 2.80 2.85 2.90 2.95 3.00 3.10 1/8 3.20 3.30 3.40 3.50 9/64 3.60 3.70 3.80 3.90 5/32 4.00 4.10 4.20 4.25 4.30 4.40 11/64 4.50 4.60 4.70

105597 105600 101117 105619 105627 105635

JOBBER DRILLS

DIA (INCH)

EVACUT

ORDER QTY

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SILVER BLACK JET

JOBBER DRILLS

COBALT

* Up to 5.0mm - 10 pieces, 5.1mm to 5.4mm - 5 pieces, 5.5mm - 10mm pieces, 5.6mm to 5.9mm - 5 pieces, 6mm -10 pieces, 6.1mm to 6.4mm - 5 pieces, 6.5mm - 10 pieces, 6.6mm to 13.0mm - 5 pieces. Up to 17/64” - 10 pieces, 9/32 to 1/2”- 5 pieces

SURFACE FINISH

SILVER

BLACK JET

SILVER

COBALT

PACKAGING

BULK

PREPACK

MATERIAL

HSS

HSS Co.5

*as above

Item No.

101125 105643 105651 105678 105686 101133 105694 105708 105716 105724 101141 105732 105740 105759 105767 101168 105775 105783 105791 105805 101176 105813 105821 105848 105856 101184 105864 105872 105880 105899 101192 105902 105910 105929 105937 101206 105945 105953 105961 105988 101214

101486 113978 113984 114014 114017 101494 114020 114023 114027 114065 101508 114068 114071 114074 114077 101516 114138 114141 114144 114147 101524 114150 114189 114192 114196 101532 114200 114203 114235 114239 101540 114242 114245 114248 114294 101559 114301 114304 114307 114311 101567

102172

102565

107042

108083

102180

102574

107093 102199

108092 102583

102202 107158

102592 108101

102210

102601

107204

108110

102229

102610

107255

108119

102237

102619

107328 102245

108128 102628

102253

102637

ORDER QTY

EVACUT

JOBBER DRILLS

DIA (INCH)

DIA (MM)

3/16 4.80 4.90 5.00 5.10 13/64 5.20 5.30 5.40 5.50 7/32 5.60 5.70 5.80 5.90 15/64 6.00 6.10 6.20 6.30 1/4 6.40 6.50 6.60 6.70 17/64 6.80 6.90 7.00 7.10 9/32 7.20 7.30 7.40 7.50 19/64 7.60 7.70 7.80 7.90 5/16

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SILVER BLACK JET

JOBBER DRILLS

COBALT

SILVER

BLACK JET

SILVER

COBALT

PACKAGING

BULK

PREPACK

MATERIAL

HSS

HSS Co.5

ORDER QTY DIA (INCH)

*as above

DIA (MM)

Item No.

8.00 8.10 8.20 8.30

105996 106003 106011 106038 101222 106046 106054 106062 106070 101230 106089 106097 106100 106119 101249 106127 106135 106143 106151 101257 106178 106186 106194 106208 101265 106216 106224 106232 106240 101273 106259 106267 106275 106283 101281 106291 106305 106313 106321 101303 106348

114340 114343 114346 114349 101575 114352 114391 114394 114397 101583 114402 114406 114456 114460 101591 114463 114468 114472 114502 101605 114505 114508 114512 114516 101613 114553 114557 114560 114564 101621 114569 114626 114630 114633 101648 114637 114640 114677 114681 101656 114684

107379

108137

102261

102646

107425

108146

102288

102655

107484

108155

102296

102664

107530 102318

108164 102673

102326 107581

102682 108173

102334

102691

107654

108182

102342

102700

107700

108191

102350

102709

21/64 8.40 8.50 8.60 8.70 11/32 8.80 8.90 9.00 9.10 23/64 9.20 9.30 9.40 9.50 3/8 9.60 9.70 9.80 9.90 25/64 10.00 10.10 10.20 10.30 13/32 10.40 10.50 10.60 10.70 27/64 10.80 10.90 11.00 11.10 7/16 11.20

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

SURFACE FINISH

JOBBER DRILLS

SILVER BLACK JET

JOBBER DRILLS

COBALT

SURFACE FINISH

SILVER

BLACK JET

SILVER

COBALT

PACKAGING

BULK

PREPACK

MATERIAL

HSS

HSS Co.5

ORDER QTY

EVACUT

JOBBER DRILLS

DIA (INCH)

*as above

DIA (MM)

Item No.

11.30 11.40 11.50

106356 106364 106372 101311 106380 106399 106402 106410 101338 106429 106437 106445 106453 101346 106461 106488 106496 106518 101354 106526 106534 106542

114692 114699 114723 101664 114727 114732 114735 114738 101672 114782 114786 114791 114797 101680 114804 114839 114844 114848 101699 114853 114859 114898

107751 102369

108200 102718

102377 107816

102727 108209

102385

102736

107867

108218

102393

102745

107913

108227

29/64 11.60 11.70 11.80 11.90 15/32 12.00 12.10 12.20 12.30 31/64 12.40 12.50 12.60 12.70 1/2 12.80 12.90 13.00

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

STUB & PANEL DRILLS

BLACK JET

SURFACE FINISH

silver

BLACK JET

PACKAGING

BULK

PACKAGING

bulk

BULK

MATERIAL

HSS

MATERIAL

hss

HSS

ORDER QTY

ORDER QTY DIA (INCH)

DIA (MM)

Item No.

DIA (INCH)

DIA (MM)

Item No.

STUB 1.00 3/64 1.50 1/16 3/64 2.00 3/32 2.50 7/64 3.00 1/8

116769 3.30 3.50

9/64 5/32 4.00 4.10

116866

11/64 4.50 3/16 4.90 5.00 13/64 5.50 7/32 15/64 6.00 1/4 6.50 17/64 7.00 9/32 7.50 5/16 8.00 21/64

116947

117899 111345 117902 111347 111349 117905 111351 117907 111353 117910 111355 117912 117913 111357 111359 117916 117917 111361 117919 111363 117921 117922 111365 117925 111367 111369 117928 111371 117931 111373 117934 111375 117937 111379 117940 111381

8.50

117943 111383 117946 111385 111387 111391 117955 117958 117961 117964 117967 111403 117970

11/32 9.00 23/64 3/8 13/32 27/64 7/16 15/32 31/64 1/2

10.50 11.00 11.50 12.00 12.50 13.00

PANEL DRILLS SINGLE END HSS

1/8 3.3 4.1 4.9

#30 #20 #11

111805 115878 115894 115916

3.3 4.1 4.9

#30 #20 #11

111821 115975 115991 116017

3.3 4.1 4.9

#30 #20 #11

111872 116300 116327 116343

3.3 4.1 4.9

#30 #20 #11

111856 116297 116319 116335

3.3 4.1 4.9

#30 #20 #11

111838 116127 116143 116155

DOUBLE END HSS

1/8

TWIN PACK DOUBLE END

1/8

TWIN PACK SINGLE END

1/8

10 PACK DOUBLE END 1/8

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

STUB & PANEL DRILLS

SIlver

EVACUT

SURFACE FINISH

EVACUT

LONG SERIES DRILLS

SURFACE FINISH

BLACKJET

PACKAGING

prepack

MATERIAL

HSS

ORDER QTY

DIA (INCH)

OAL (metric)

3/64

76.5

1/16 5/64

76.5 96

3/32

109

7/64

118

1/8

131.5

9/64 5/32

139 139

11/64

148

3/16

13/64

7/32 15/64

1/4

17/64

9/32

19/64 5/16

OAL (metric)

Item No.

1.00

1.50

2.00

109

2.50

118

3.00

131.8

3.50

139

4.00

148

4.50 4.50

148 300

5.00 5.00

154 300

5.50 5.50

154 300

6.00 6.00

159 300

6.50 6.50

163 300

7.00 7.00

163 300

7.50 7.50

166 300

122002 121029 122011 121037 121045 122020 121053 122029 121061 122038 121088 122047 121096 121118 122056 121126 122065 127604 121134 122074 127825 121142 122083 128066 121150 121169 122092 128287 121177 122101 128503 121185 122110 128724 121193 122119 128937 121207 121215

148

154

154 159

163

166 166

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

BLACKJET

PACKAGING

prepack

MATERIAL

HSS

ORDER QTY

DIA (INCH)

21/64

11/32

23/64

3/8 25/64

13/32

27/64

7/16

29/64 15/32

31/64

1/2

OAL (metric)

8.00 8.00

169 300

8.50 8.50

169 300

9.00 9.00

176 300

9.50 9.50

176 300

10.00 10.00

176 300

10.50 10.50

183 300

11.00 11.00

189 300

11.50 11.50

196 300

12.00 12.00

203 300

12.50 12.50

203 300

13.00 13.00

210 300

166

169

176

176 183

183

189

196 196

203

Item No.

122128 129151 121223 122137 129313 121231 122146 129488 121258 122155 129666 121266 121274 122164 129844 121282 122173 130001 121290 122182 130184 121304 122191 130354 121312 121320 122200 130516 121339 122209 130672 121347 122218 130842

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

SURFACE FINISH

LONG SERIES DRILLS

EXTRA LONG

EVACUT

EXTRA LONG - DEEP HOLE DRILL

EXTRA LONG DEEP HOLE DRILLS

SURFACE FINISH

tinite

PACKAGING

prepack

MATERIAL

hss co.5

ORDER QTY

mm(Dia.)

3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00

OAL (metric)

265 280 295 315 330 330 350 370 370 390 390 410 410 430

Item No.

125068 125077 125086 125095 125104 125113 125122 125131 125140 125149 125158 125167 125176 125185

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

prepack

MATERIAL

hss

ORDER QTY

DIA (INCH)

DIA (mm)

Item No.

3/8” Shank

13/32 11.00 7/16 11.50 15/32 12.00 12.50 1/2 13.00 17/32 13.50 14.00 9/16 14.50 15.00 19/32 15.50 5/8 16.00 16.50 21/32 17.00 17.50 18.00 23/32 18.50 19.00 3/4 19.50 20.00

161284 162965 161152 162970 161306 162973 162981 161179 162987 161310 162992 163007 161195 163012 163016 161316 163019 161217 163023 163030 161322 163036 163041 163058 161328 163062 163067 161268 163071 163074

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

PACKAGING

REDUCED SHANK DRILLS

EVACUT

REDUCED SHANK DRIILS

REDUCED SHANK DRILLS

PACKAGING

prepack

MATERIAL

hss

ORDER QTY

DIA (INCH)

DIA (mm)

Item No.

1/2” Shank

33/64 17/32 13.50 35/64 14.00 9/16 14.50 37/64 15.00 19/32 39/64 15.50 5/8 16.00 41/64 16.50 21/32 17.00 43/64 11/16 17.50 45/64 18.00 23/32 18.50 47/64 19.00 3/4 49/64 19.50 25/32 20.00 51/64 20.50 13/16 21.00 53/64 27/32

151009 151017 155004 151025 155012 151033 155020 151041 155039 151068 151076 155047 151084 155055 151092 155063 151106 155071 151114 151122 155098 151130 155101 151149 155128 151157 155136 151165 151173 155144 151181 155152 151203 155160 151211 155179 151238 151246

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

prepack

MATERIAL

hss

ORDER QTY

DIA (INCH)

DIA (mm)

Item No.

21.50

155187 151254 155195 151262 155209 151270 155217 151289 151297 155225 151300 155233 151319 155241 151327 155268 151335 151343 155276 151357 155284 155292 151394 155306 155314 155322 155330 151432 155349 155357 151475 155365 155367 155370 155373 151513 155376

1/2” Shank

55/64 22.00 7/8 22.50 57/64 23.00 29/32 59/64 23.50 15/16 24.00 61/64 24.50 31/32 25.00 63/64 1" 25.50 1 1/32 26.00 26.50 1 1/16 27.00 27.50 28.00 28.50 1 1/8 29.00 29.50 1 3/16 30.00 30.50 31.00 31.50 1 1/4 32.00

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

PACKAGING

REDUCED SHANK DRILLS

EVACUT

DRILL SET GUIDE

No 4 & No 4M

DD13M & DD19M

DD13 & DD21

No 4RM

No 2

171182 & 175129

175307 & 175330

171298 & 171301

176794

171050

E2 E3 E1 170941 170968 170933

E2M E3M E1M

G3M

174963

175097

174971

174955

50M

51M

SL13

175137

175188

175056

175099

171530

H1 & H1M REFILL KITS

M99

EM22R

H2 & H2M REFILL KITS

172405 & 176405

175340

174974

175340 & 176448

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DRILL SETS

MATERIAL

blackjet

cobalt

hss

set no.

range & rises

no. drills

IMPERial No.2 No.3 E1 E2 E3 No.4 SL13 DD13 DD21 H1 H2

1/16-3/8x64ths 1/16-1/2x64ths 1/16-1/4x64ths 1/16-3/8x64ths 1/16-1/2x64ths 1/16-1/4x64ths 1/16-1/4x64ths 1/16-1/4x64ths 1/16-3/8x64ths 1/16-1/8x64ths 1/16-3/16x32nds

METRIC No.2M 1.00-10.00mmx.5mm No.3M 1.00-13.00mmx.5mm 50M 1.00-5.90mmx.1mm 51M 6.00-10.00mmx.1mm E1M 1.0-6.5mmx.5mm E2M 1.0-10.0mmx.5mm E3M 1.0-13.0mmx.5mm G3M 1.0-13.0mm x.5mm No.4M 1.0-6.5mmx.5mm DD13M 1.00-7.00mmx.5mm DD19M 1.00-10.00mmx.5mm H1M 1.5,2.0,2.5,3.0,3.5 H2M 1.5,2.0,3.0,4.0,5.0 M99 ROTARY SET 1mm - 9.9mm by 0.1mm rises

hss co.5

case

Item No.

21 29 13 21 29 13 13 13 21 5 5

Metal Metal ABS ABS ABS Plastic Plastic Plastic Dial-a-Drill Plastic Dial-a-Drill Plastic Tray Plastic Tray

171050 171115 170933 170941 170968 171182 171530 171298 171301 172405 172448

172871 172898 172820 172839 172847

19 25 50 41 12 19 25 25 12 13 19 5 5

Metal Metal Metal Metal ABS ABS ABS Metal Plastic Plastic Dial-a-Drill Plastic Dial-a-Drill Plastic Tray Plastic Tray Plastic

Item No.

170927

175056 172936 175099 172928 175137 175190 175188 175193 174955 172957 174963 172963 174971 172979 175097 175129 175307 175330 176405 176448 10mm - 13.0mm by 0.5 rises + 10.9, 11.9 & 12.9mm

175204 175206

175238

175340

Miscellaneous

Ezisizer â&#x20AC;&#x201C; Drill & Screw Gauge Card Tip Tool Drill Kit Imperial Drill Dispenser- Empty Metric Drill Dispenser - Empty Ezi Sizer Gauge

Plastic Card

340892 171700 171379 175374

Metal -Counter Metal -Counter S390955002

reduced shank drill sets Set No.

Range & Rises

No.Drills

Case

Item No.

3/8 Shank

EM22R

1.0-10.0x0.5mm rises with 11.0,12.0,13.0mm-10.0mm shank

Plastic

174974

16.0, 18.0, 22.0, 25.0 14.0, 15.0, 16.0, 16.5, 18.0, 20.0, 22.0, 25.0

4 8

Foam pack Plastic

176794 176801

1/2 Shank

4RM 8RM

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DRILL SETS

silver

EVACUT

SURFACE FINISH

MASONRY DRILLS & SET

SURFACE FINISH

silver (prepack)

material

tungsten carbide tipped

EVACUT

MASONRY DRILLS & SET

TYPE

(SF) standard fixing

Inch (DIA)

mm (DIA)

mm (OAL)

1/8 5/32 3/16

3.50 4.00 5.00

75 75 85 150 85 150 100 150 100 150 400 100 117 150 400 117 150 400 150 117 150 400 117 150 400 150 400 150 150 400 150 400 150 400

5.50 6.00 1/4

9/32 5/16

3/8

7/16

1/2

6.50

7.00 8.00

10.00

11.00 12.00

13.00

5/8

16.00

23/32 3/4

18.00 20.00

7/8

22.00

26.00

SHANK Size

Item No.

(SB) single brick Item No.

DESCRIPTION

MASONRY SET SF6

Item No.

182850 182877 182915 181412 182931 181417 182966 181420 182982 181439 191086 183008 183040 181455 191108 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12

183067 181471 191124 181501 183105 181528 191159 183121 181536 191167 181552 191183 181560 181579 191205 181595 191221 181617 191256

MASONRY DRILL set SURFACE FINISH

(DB) double brick

SILVER - TUNGSTEN CARBIDE TIPPED CONTENTS

4.0, 5.0, 5.5, 6.5, 8.0, 10.0mm

Item No.

173400

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SILVER

PACKAGING

PREPACK

MATERIAL

TUNGSTEN CHROME ALLOY

DIA (MM)

Item No.

SPADE BITS 6.00 8.00 10.00 12.00 13.00 14.00 16.00 18.00 19.00 20.00 22.00 24.00 25.00 28.00 30.00 32.00 35.00 38.00

177938 177946 177954 177962 177967 177970 177989 177997 178004 178012 178020 178039 178047 178055 178063 178071 178098 178101

EVACUT

SURFACE FINISH

SPADE BITS & SETS

SPADE BIT EXTENTION SHANKS Extension Shanks - Suitable for use with Spade Bits 19mm and larger

150mm long 300mm long DESCRIPTION

178209 178217 CONTENTS

Item No.

Sizes: 19.0, 22.0, 25.0mm Sizes: 16.0, 19.0, 22.0, 25.0, 32.0, 150mm Extension

178382 178386

Spade Bit Sets

3 Piece Set 6 Piece Set

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

AUGER BITS

SURFACE FINISH

bright

order qty

SURFACE FINISH

hss

AUGER BITS

EVACUT

size

short

DIA (MM)

mm (overall)

Item No.

6.00

160 420 170 225 465 190 250 500 190 270 500 190 500 200 290 500 200 290 500 200 330 500 210 330 500 210 330 500 210 330 500 500 500

179005

8.00

10.00

12.00

13.00 14.00

16.00

18.00

20.00

22.00

25.00

30.00 32.00

medium Item No.

long Item No.

179140 179009 179096 179141 179013 179100 179143 179017 179104 179147 179021 179148 179025 179108 179149 179029 179112 179151 179033 179114 179153 179037 179116 179155 179041 179118 179157 179045 179120

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

179159 179163 179167

TOOL BITS

SURFACE FINISH

silver 5 (1 FOR > 1/2)

shape

ROUND

Inch (DIA)

Inch (OAL)

Item No.

3/32 1/8 3/16

3 3 2 1/2 3 4 2 1/2 3 4 2 1/2 3 4 3 4 6 4 6 3/32x4-1/2 4 1/2 6 3/32x5 5 1/8x6 1/8x7 7 3/16x8

245062 245089

1/4

5/16

3/8

1/2 1/2 5/8 5/8 3/4 3/4 7/8 1" 1"

M2 HSS

M42 COHSS

SQUARE

M42 COHSS

SQUARE

Item No.

245518

242500 242519

245534 245539 245542 245550

242535 242543 242551 242578 242586 242594 242608 242616 242624 242640 242659

BEVEL Item No.

TOOL BITS

M2 HSS

EVACUT

order QTy material

245127

245143

245178 245194 245232

245555 245577 245580 245584 245593

241504 245615

242691

245245 241547 242748 241598 241644 242829 241687

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

HACKSAWS

HAND HELD BLADES & FRAMES

SURFACE FINISH

grey

RED

packaging

bulk

TWIN pack

material

low alloy

flexible

HACKSAWS

EVACUT

order QTy

Size

Item No.

12 x 1/2 x 18TPI

300 x 13 x 18TPI 300 x 13 x 24TPI 300 x 13 x 32TPI

255149 255157 255165

255572 255580 255599

12 x 1/2 x 24TPI 12 x 1/2 x 32TPI SURFACE FINISH

blue

packaging material order QTy

bulk all hard hss 10

Size

12 x 1/2 x 18TPI 12 x 1/2 x 24TPI 12 x 1/2 x 32TPI SURFACE FINISH packaging material order QTy Size

12 x 1/2 x 18TPI 12 x 1/2 x 24TPI 12 x 1/2 x 32TPI

mm 300 x 13 x 18TPI 300 x 13 x 24TPI 300 x 13 x 32TPI

Item No.

255491 255505 255513

255696 255718 255726

orange bulk bi-metal-hss 10 mm 300 x 13 x 18TPI 300 x 13 x 24TPI 300 x 13 x 32TPI

twin pack

twin pack 1

Item No.

255858 255866 255874

255998 256005 256013

hacksaw frames DESCRIPTION

Item No.

Proframe Hacksaw Frame & Blade

257656

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

blue

orange

material

all hard hss

bi-metal hss

order qty

Teeth/Inch

Item No.

10 14 10 14 6 10 14 6 10 14 6 10 6 10

256080 256099 256188 256196 256226 256234 256239 256307 256315 256293 256420 256439 256498 256501

256803 256811 256870 256889 256919 256927 256935 257001 257028 257036 257095 257109

Size (INCH)

Size (MM)

12" x 1" x 10TPI 12" x 1" x 14TPI 14" x 1" x 10TPI 14" x 1" x 14TPI 14" x 1/4" x 6TPI 14" x 1/4" x 10TPI 14" x 1/4" x 14TPI 16" x 1/4" x 6TPI 16" x 1/4" x 10TPI 16" x 1/4" x 14TPI 18" x 1/4" x 6TPI 18" x 1/4" x 10TPI 18" x 1/2" x 6TPI 18" x 1/2" x 10TPI

300 x 25 x 10TPI 300 x 25 x 14TPI 350 x 25 x 10TPI 350 x 25 x 14TPI 350 x 32 x 6TPI 350 x 32 x 10TPI 350 x 32 x 14TPI 400 x 32 x 6TPI 400 x 32 x 10TPI 400 x 32 x 14TPI 450 x 32 x 6TPI 450 x 32 x 10TPI 450 x 38 x 6TPI 450 x 38 x 10TPI

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

SURFACE FINISH

POWERSAW BLADES

CARBIDE BURS

TUNGSTEN CARBIDE & DOUBLE CUT

Code

DIA (INCH)

SF SC

Length of BUR HEAD inch

Shank Dia. mm

Item No.

1/16 3/32 1/8 1/4 1/4 3/16 5/16 3/8 7/16 1/2 5/8 3/4 1"

1/4 7/16 9/16 1/2 5/8 5/8 3/4 3/4 1" 1" 1" 1" 1"

3mm 3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SA410 S3681SA420 S3681SA430 S3681SA510 S3681SA100 S3681SA140 S3681SA200 S3681SA300 S3681SA400 S3681SA500 S3681SA600 S3681SA700 S3681SA900

3/32 1/8 1/4 1/4 1/8 3/16 5/16 3/8 7/16 1/2 5/8 3/4

7/16 9/16 1/2 5/8 1/2 5/8 3/4 3/4 1" 1" 1" 1"

3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SC410 S3681SC420 S3681SC510 S3681SC100 S3681SC120 S3681SC140 S3681SC200 S3681SC300 S3681SC400 S3681SC500 S3681SC600 S3681SC700

3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SD410 S3681SD420 S3681SD510 S3681SD100 S3681SD110 S3681SD140 S3681SD200 S3681SD300 S3681SD400 S3681SD500 S3681SD600 S3681SD700 S3681SD900

3mm 3mm 6mm 6mm 6mm 6mm 6mm

S3681SE410 S3681SE510 S3681SE100 S3681SE300 S3681SE500 S3681SE600 S3681SE700

EVACUT

CARBIDE BURS

CYLINDRICAL SQUARE END - END CUTTING

SA410 SA420 SA430 SA510 SA100 SA140 SA200 SA300 SA400 SA500 SA600 SA700 SA900 BALL NOSED CYLINDER

SC410 SC420 SC510 SC100 SC120 SC140 SC200 SC300 SC400 SC500 SC600 SC700 BALL

SD410 SD420 SD510 SD100 SD110 SD140 SD200 SD300 SD400 SD500 SD600 SD700 SD900

3/32 1/8 1/4 1/4 1/8 3/16 5/16 3/8 7/16 1/2 5/8 3/4 1"

OVAL

SE410 SE510 SE100 SE300 SE500 SE600 SE700

1/8 1/4 1/4 3/8 1/2 5/8 3/4

7/32 3/8 3/8 3/8 7/8 1" 1"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

CARBIDE BURS

TUNGSTEN CARBIDE & DOUBLE CUT

Code

DIA (INCH)

Length of BUR HEAD inch

Shank Dia. mm

Item No.

1/8 1/8 1/4 1/4 1/4 1/4 3/8 7/16 1/2 5/8 3/4

1/4 1/2 1/2 5/8 1 1/4 1 1/2 3/4 1" 1" 1" 1"

3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SF410 S3681SF420 S3681SF510 S3681SF100 S3681SF140 S3681SF150 S3681SF300 S3681SF400 S3681SF500 S3681SF600 S3681SF700

1/8 1/8 1/4 1/4 1/2 5/16 3/8 1/2 5/8 3/4

1/4 3/8 1/2 5/8 3/4 3/4 3/4 1" 1" 1"

3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SG410 S3681SG430 S3681SG510 S3681SG100 S3681SG130 S3681SG200 S3681SG300 S3681SG500 S3681SG600 S3681SG700

1/8 1/4 5/16 1/2 5/8 3/4

1/4 5/8 3/4 1 1/4 1 7/16 1 5/8

3mm 6mm 6mm 6mm 6mm 6mm

S3681SH410 S3681SH100 S3681SH200 S3681SH500 S3681SH600 S3681SH700

3/8 1/2 5/8 7/8 1 1/16 1 1/8 1 5/16 1 1/2

3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SL410 S3681SL420 S3681SL100 S3681SL200 S3681SL300 S3681SL400 S3681SL600 S3681SL700

TREE SHAPE POINTED END

SG410 SG430 SG510 SG100 SG130 SG200 SG300 SG500 SG600 SG700 FLAME

SH410 SH100 SH200 SH500 SH600 SH700

BALL NOSED TAPER SHAPE 14deg INCLUDED ANGLE

SL410 SL420 SL100 SL200 SL300 SL400 SL600 SL700

1/8 1/8 1/4 5/16 3/8 1/2 5/8 3/4

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

SF410 SF420 SF510 SF100 SF140 SF150 SF300 SF400 SF500 SF600 SF700

CARBIDE BURS

BALL NOSED TREE SHAPE

CARBIDE BURS

TUNGSTEN CARBIDE & DOUBLE CUT, 1/4” diameter 6” long steel shank

Code

DIA (INCH)

Length of BUR HEAD (inch)

Shank Dia. (mm)

Item No.

1/8 1/8 1/4 1/4 1/4 1/4 3/8 1/2 5/8

7/16 5/8 1/2 1/2 3/4 1" 5/8 7/8 1"

3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm

S3681SM420 S3681SM430 S3681SM510 S3681SM100 S3681SM200 S3681SM300 S3681SM400 S3681SM500 S3681SM600

1/8 1/4 1/4 3/8 1/2 5/8 3/4

3/16 1/4 5/16 3/8 1/2 3/4 5/8

3mm 3mm 6mm 6mm 6mm 6mm 6mm

S3681SN420 S3681SN510 S3681SN100 S3681SN200 S3681SN400 S3681SN600 S3681SN700

EVACUT

CARBIDE BURS

CONE SHAPE

SM420 SM430 SM510 SM100 SM200 SM300 SM400 SM500 SM600 INVERTED CONE

SN420 SN510 SN100 SN200 SN400 SN600 SN700

1/4” DIAMETER, 6” LONG STEEL SHANK Code

DIA (INCH)

Length of BUR HEAD (inch)

Shank Dia. (mm)

OAL (INCH)

Item No.

1/4 3/8 1/2

5/8 3/4 1

1/4 1/4 1/4

6 1/2 6 3/4 7

S3681SA1L6 S3681SA3L6 S3681SA5L6

1/4 3/8 1/2

5/8 3/4 1

1/4 1/4 1/4

6 1/2 6 3/4 7

S3681SC1L6 S3681SC3L6 S3681SC5L6

1/4 3/8 1/2

1/4 1/4 1/4

6 1/14 6 3/8 6 1/2

S3681SD1L6 S3681SD3L6 S3681SD5L6

1/4

6 1/14

S3681SE1L6

1/4 3/8 1/2

5/8 3/4 1

1/4 1/4 1/4

6 3/4 7

S3681SF1L6 S3681SF3L6 S3681SF5L6

1/4

7 1/16

S3681SL3L6

CYLINDRICAL SQUARE END - END CUTTING

SA1L6 SA3L6 SA5L6 CYLINDRICAL RADIUS END

SC1L6 SC3L6 SC5L6 BALL SHAPE

SD1L6 SD3L6 SD5L6 OVAL

SE1L6 TREE SHAPE - RADIUS END

SF1L6 SF3L6 SF5L6

TAPER SHAPE - (140 INCLUDED) RADIUS END

SL3L6

3/8

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

CARBIDE BURS & SETS SD

Code

DIA (INCH)

TUNGSTEN CARBIDE & ALUMINIUM CUT

Length of BUR HEAD (inch)

Shank Dia. (mm)

Item No.

1/4 3/8 1/2 5/8 3/4

3/4 3/4 1" 1" 1"

6mm 6mm 6mm 6mm 6mm

S3683SA1AC S3683SA3AC S3683SA5AC S3683SA6AC S3683SA7AC

1/4 3/8 1/2 3/4

3/4 3/4 1" 1"

6mm 6mm 6mm 6mm

S3683SC1AC S3683SC3AC S3683SC5AC S3683SC7AC

6mm 6mm 6mm 6mm 6mm

S3683SD1AC S3683SD3AC S3683SD5AC S3683SD6AC S3683SD7AC

EVACUT

SA1AC SA3AC SA5AC SA6AC SA7AC

CARBIDE BURS & SETS

CYLINDRICAL SQUARE END - END CUTTING

CYLINDRICAL RADIUS END

SC1AC SC3AC SC5AC SC7AC BALL

SD1AC SD3AC SD5AC SD6AC SD7AC

1/4 3/8 1/2 5/8 3/4

OVAL

SE3AC SE5AC SE6AC

3/8 1/2 5/8

3/8 7/8 1"

6mm 6mm 6mm

S3683SE3AC S3683SE5AC S3683SE6AC

1/4 3/8 1/2 5/8

3/4 3/4 1" 1"

6mm 6mm 6mm 6mm

S3683SF1AC S3683SF3AC S3683SF5AC S3683SF6AC

TREE RADIUS END

SF1AC SF3AC SF5AC SF6AC

carbide BUR sets Size

Components

Pcs

Item No.

BUR SETS

5PCE SET - 6mm Shank 6PCE SET - 3mm Shank 10 PCE SET - 6mm Shank GBKIT 5 PCE SET 5 PCE SET 5 PCE SET

SA300 SA430

SA500 SC420

SC300 SD420

SC500 SF420

SF300 SG430

SL420

5 6

S368910041 S368910032

SA300

SA500

SC300

SC500

SL400

SE300

S368910207

SG300 SCB100 SCB300 SCB500

SG500 SA100 SA300 SA500

SF500 SC100 SC300 SC500

SD300 SD100 SD300 SD500

SF100 SF300 SF500

SC1AC SC3AC SC5AC

5 5 5

S368910001 S368910003 S368910005

SA100 SD100 SF500 SL400

SA300 SD300 SG300 SL600

SA500 SE300 SH200

SC100 SE500 SH500

SC300 SF100 SL200

SC500 SF300 SL300

S368910047

BUR MERCHANDISER

EBM20

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

ROUTER BITS SEPARATE EVACUT ROUTER BIT CATALOGUE AVAILABLE ON REQUEST

ORDER QTY Item No.

1 DESCRIPTION OAL (MM)

EVACUT

ROUTER BITS

Straight Router Bits 2 Flute (6.4mm Dia. X 25mm Long Shank.)

RSR364 RSR464 RSR564 RSR664 RSR6464 RS864 RS964 RS9564 RS1064 RS1264 RS12764 RS1364 RS1664 RS1864 RS1964 RS2064 RS2564

3mm dia. x 10mm cutting length (Single flute) 4mm dia. x 10mm cutting length (Single flute) 5mm dia. x 10mm cutting length (Single flute) 6mm dia. x 16mm cutting length 6.4mm dia. x 16mm cutting length 8mm dia. x 19mm cutting length 9mm dia. x 19mm cutting length 9.5mm dia. x 19mm cutting length 10mm dia. x 19mm cutting length 12mm dia. x 19mm cutting length 12.7mm dia. x 19mm cutting length 13mm dia. x 19mm cutting length 16mm dia. x 19mm cutting length 18mm dia. x 19mm cutting length 19mm dia. x 19mm cutting length 20mm dia. x 19mm cutting length 25mm dia. x 19mm cutting length

STRAIGHT ROUTER BITS 2 FLUTE (12.7MM DIA. X 40MM LONG SHANK) RS6127 6mm dia. x 16mm cutting length RS64127 6.4mm dia. x 16mm cutting length RS8127 8mm dia. x 19mm cutting length RS9127 9mm dia. x 19mm cutting length RS95127 9.5mm dia. x 19mm cutting length RS10127 10mm dia. x 19mm cutting length RS12127 12mm dia. x 32mm cutting length RS127127 12.7mm dia. x 32mm cutting length RS13127 13mm dia. x 32mm cutting length RS16127 16mm dia. x 32mm cutting length RS18127 18mm dia. x 32mm cutting length RS19127 19mm dia. x 32mm cutting length RS20127 20mm dia. x 32mm cutting length RS22127 22mm dia. x 32mm cutting length RS25127 25mm dia. x 32mm cutting length

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

ROUTER BITS SEPARATE EVACUT ROUTER BIT CATALOGUE AVAILABLE ON REQUEST

ORDER QTY

Item No.

DESCRIPTION OAL (MM)

FLUSH TRIM PANEL BITS (6.4MM DIA. SHAFT)

RFT1964 RFT2064

9mm bearing dia. (B9) X 19mm cutter length x 25mm shank length 13mm bearing dia. (B13) X 20mm cutter length x 30mm shank length 2mm radius x 10mm cutter height(5/64") 3mm radius x 10mm cutter height(1/8") 5mm radius x 11mm cutter height(3/16") 8mm radius x 16mm cutter height(5/16") 6mm radius x 12mm cutter height(R1/4") 10mm radius x 17mm cutter height(R3/8") 13mm radius x 21mm cutter height(R1/2")

ROUNDING OVER BITS BALL BEARING GUIDE 2 FLUTE 13MM BEARING. (12.7MM DIA. X 40MM LONG SHANK)

RR06127 RR08127 RR10127 RR13127 RR19127 RR25127

6mm radius x 12mm cutter height 8mm radius x 16mm cutter height 10mm radius x 17mm cutter height 13mm radius x 20mm cutter height 19mm radius x 26mm cutter height 25mm radius x 33mm cutter height

ISOMETIC ROUNDING OVER BIT, 2 FLUTE, 13MM BEARING.(12.7MM DIA. X 40MM LONG SHANK WITH BEARING)

RIR3064 RIR3564

30mm radius x 24mm cutter height x 52mm cutter dia. 35mm radius x 24mm cutter hieght x 61mm cutter dia.

Ball Nose bits (single cove bits) 2 flute bearing, 13mm ball bearing guide.(6.4mm dia. X 25mm long shank)

RBN0664 RBN0864 RBN1064

6mm radius x 12mm cutter height x 25mm cutter dia. 8mm radius x 14mm cutter height x 29mm cutter dia. 10mm radius x 16mm cutter height x 33mm cutter dia.

Ball Nose bits (single cove bits) 2 flute, 13mm ball bearing guide.(12.7mm dia. X 40mm long shank)

RBN10127 RBN13127

10mm radius x 16mm cutter height x 33mm cutter dia. 13mm radius x 16mm cutter height x 39mm cutter dia.

Classic Coving bits 2 flute, 13mm ball bearing guide.(6.4mm dia. X 25mm long shank)

RCLC2764 RCLC3264

27mm dia. X 13mm cutter height 32mm dia. X 16mm cutter height

Classic Coving bits 2 flute, 13mm ball bearing guide.(12.7mm dia. X 40mm long shank)

RCLC3764

Classic coving bit 37mm cutter dia. X 19mm cutter height

Triple Coving bits 2 flute, 13mm ball bearing guide.(12.7mm dia. X 40mm long shank)

Triple cove bit 2 flute, 13mm ball bearing guide.(12.7mm dia. X 40mm long shank) 45mm dia. X 22mm cutter height

RTC45127

Double Coving bits 2 flute, 13mm ball bearing guide.(12.7mm dia. X 40mm long shank)

RDC30127

Double cove bit 2 flute, 13mm ball bearing guide, 30mm dia. X 17mm cutting length

Core box bits (6.4mm dia. X 25mm long shank)

RCB9564 RCB12764 RCB1664 RCB1964

9.5mm dia. x 12mm cutting length 12.7mm dia. x 12mm cutting length 16mm dia. x 12mm cutting length 19mm dia. x 12mm cutting length

Core box bits (12.7mm dia. X 40mm long shank)

RCB16127 RCB19127 RCB22127

16mm dia. x 32mm cutting length 19mm dia. x 32mm cutting length 22.2mm dia. x 32mm cutting length

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

EVACUT

RR264 RR364 RR564 RR864 RR664 RR1064 RR1364

ROUTER BITS

ROUNDING OVER BITS BALL BEARING GUIDE 2 FLUTE, 13MM BEARING. (6.4MM DIA. X 25MM LONG SHANK)

ROUTER BITS

ORDER QTY

Item No.

DESCRIPTION OAL (MM)

ROMAN OGEE BITS, 13MM BALL BEARING GUIDE. (6.4MM DIA. X 25MM LONG SHANK)

RRO2964 RRO3464

29mm dia. X 16mm cutter height 34mm dia. X 19mm cutter height

EVACUT

ROUTER BITS

ROMAN OGEE BITS, 13MM BALL BEARING GUIDE.(12.7MM DIA. X 40MM LONG SHANK)

RRO29127 RRO33127 RRO37127

29mm dia. X 16mm cutter height 33mm dia. X 19mm cutter height(R5) Roman Ogee bit, 13mm ball bearing guide.(6.4mm dia. X 25mm long shank) 37mm dia. X 17mm cutter height

OGEE BITS, 13MM BALL BEARING GUIDE - 2 FLUTE (6.4MM DIA. X 25MM LONG SHANK)

ROG3064 ROG3764

30mm dia. X 17mm cutter height 37mm dia. X 20mm cutter height(R6)

OGEE BITS, 13MM BALL BEARING GUIDE - 2 FLUTE (12.7MM DIA. X 40MM LONG SHANK)

ROG30127 ROG37127

30mm dia. X 17mm cutter height 37mm dia. X 20mm cutter height

CLASSIC BIT REVERSE PROFILE (6.4MM DIA. X 25MM LONG SHANK)

RCLRP2064 RCLRP2564 RCL2564

20mm dia. X 10mm cutter height 25mm dia. X 17mm cutter height Classic bit (6.4mm dia. X 25mm long shank) 25mm dia. 10mm cutter height

CHAMFERING BITS (6.4MM DIA. X 25MM LONG SHANK)

RCF451564

15mm bevel length x 16mm cutter height x 45 degree

CHAMFERING BITS (12.7MM DIA. X 40MM LONG SHANK)

RCF4515127 RCF4525127

15mm bevel length x 16mm cutter height x 45 degree 25mm bevel length x 30mm cutter height x 45 degree

CHAMFERING BITS (6.4MM X 25MM LONG SHANK)

RCF3064

Chamfering bits (6.4mm dia. X 25mm long shank) 25mm dia. 16mm cutter height x 30 degree angle

DOVE TAIL BIT (6.4MM SHANK)

RDT141264

Dove tail bit 1/2" cutter dia. X 6.4mm shank dia. X 14 degrees. For Stanley, Liegh machines.

KEY HOLE CUTTER (6.4MM SHAFT)

RKH9564

Keyhole bit (6.4mm dia. X 35mm long shank) 9.5mm dia. X 9.5mm cutter height x 5mm groove

REBATING BITS (6.4MM DIA. X 25MM LONG SHANK)

RRE6464 RRE101264

6mm standard rebate x 4mm rebate with 13mm bearing x 13mm cutter height 10mm standard rebate x 12mm rebate with 9mm bearing x 13mm cutter height

REBATING BITS(12.7MM DIA. X 40MM LONG SHANK)

RRE1213127 RRE1315127

10mm standard rebate x 12mm rebate with 13mm bearing x 13mm cutter height 13mm standard rebate x 15mm rebate with 13mm bearing x 16mm cutter height

Slotting Cutters 2 flute, 6.4mm bore, carbide tipped cutters

RSL1564 RSL264 RSL2564 RSL364 RSL464 RSL564 RSL664

1.5mm cutter width. X 38mm cutter dia. 2.0mm cutter width. X 38mm cutter dia 2.5mm cutter width. X 38mm cutter dia 3.0mm cutter width. X 38mm cutter dia 4.0mm cutter width. X 38mm cutter dia 5.0mm cutter width. X 38mm cutter dia 6.0mm cutter width. X 38mm cutter dia

Vee Groving Cutters (6.4mm dia. X 25mm long shank)

RVG12764 RVG3264 RVG2564 RVG40127

12.7mm dia. X 9.5mm bevel length 32mm dia. X 22mm bevel length 25mm dia. X 25mm bevel length Vee Groving Cutter (12.7mm dia. X 40mm long shank) 40mm dia. X 32mm bevel length

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TECHNICAL SECTION

57 INDUSTRIAL QUALITY

drill selection CHART DRILL SELECTION CHART Drill Size Metric Fractional Gauge

80 0.35 79 0.38 1/64 0.40 78 0.42 0.45 77 0.48 0.50 76 0.52 75 0.55 74 0.58 0.60 73 72 0.65 71 0.70 70 69 0.75 68 1/32 0.80 67 66 0.85 65 0.90 64 63 0.95 62 61 1.00 60 59 1.05 58 57 1.10 1.15 56 3/64 1.20 1.25 1.30 55 1.35 1.40 1.45 1.50

54 53

1.55 1/16 1.60 52 1.65 1.70 51 1.75 50 1.80 1.85 49 1.90 48 1.95 5/64 47 2.00 2.05 46 45 2.10 2.15 44 2.20 2.25 43 2.30

mm Equiv*

Inches Equiv*

0.10 0.20 0.25 0.30 0.34 0.35 0.37 0.38 0.40 0.40 0.41 0.42 0.45 0.46 0.48 0.50 0.51 0.52 0.53 0.55 0.57 0.58 0.60 0.61 0.64 0.65 0.66 0.70 0.71 0.74 0.75 0.79 0.79 0.80 0.81 0.84 0.85 0.89 0.90 0.91 0.94 0.95 0.97 0.99 1.00 1.02 1.04 1.05 1.07 1.09 1.10 1.15 1.18 1.19 1.20 1.25 1.30 1.32 1.35 1.40 1.45 1.50 1.51 1.55 1.59 1.60 1.61 1.65 1.70 1.70 1.75 1.78 1.80 1.85 1.85 1.90 1.93 1.95 1.98 1.99 2.00 2.05 2.06 2.08 2.10 2.15 2.18 2.20 2.25 2.26 2.30

.0039 .0079 .0098 .0118 .0135 .0138 .0145 .0150 .0156 .0157 .0160 .0165 .0177 .0180 .0189 .0197 .0200 .0205 .0210 .0217 .0225 .0228 .0236 .0240 .0250 .0256 .0260 .0276 .0280 .0292 .0295 .0310 .0312 .0315 .0320 .0330 .0335 .0350 .0354 .0360 .0370 .0374 .0380 .0390 .0394 .0400 .0410 .0414 .0420 .0430 .0433 .0453 .0465 .0469 .0472 .0492 .0512 .0520 .0532 .0550 .0571 .0591 .0595 .0610 .0625 .0630 .0635 .0650 .0669 .0670 .0689 .0700 .0709 .0729 .0730 .0748 .0760 .0768 .0781 .0785 .0787 .0807 .0810 .0820 .0827 .0847 .0860 .0866 .0886 .0890 .0906

Drill Size Metric Fractional Gauge

44 2.20 2.25 43 2.30 2.35 42 3/32 2.40 41 2.45 40

mm Equiv*

2.18 2.20 2.25 2.26 2.30 2.35 2.37 2.38 2.40 2.44 2.45 2.50

Inches Equiv*

.0860 .0866 .0886 .0890 .0906 .0926 .0935 .0938 .0945 .0960 .0965 .0980

Drill Size Metric Fractional Gauge

4 5.40 3 5.50 7/32 5.60

39 2.55 38 2.60 37 2.65 2.70 36 2.75 7/64 35 2.80 34 2.85 33 2.90 32 2.95 3.00 31 3.10 1/8 3.20 30 3.30 3.40 29 3.50 28 9/64 3.60 27 3.70 26 25 3.80 24 3.90 23 5/32 22 4.00 21 20 4.10 4.20 19 4.30 18 11/64 17 4.40 16 4.50 15 4.60 14 13

4.70 3/16 4.80

12 11

4.90 10 9 5.00 8 5.10 7 13/64 6 5.20 5 5.30 4 5.40 3 5.50 7/32

2.50 2.53 2.55 2.58 2.60 2.64 2.65 2.70 2.71 2.75 2.78 2.79 2.80 2.82 2.85 2.87 2.90 2.95 2.95 3.00 3.05 3.10 3.18 3.20 3.26 3.30 3.40 3.45 3.50 3.57 3.57 3.60 3.66 3.70 3.73 3.80 3.80 3.86 3.90 3.91 3.97 3.99 4.00 4.04 4.09 4.10 4.20 4.22 4.30 4.31 4.37 4.39 4.40 4.50 4.50 4.57 4.60 4.62 4.70 4.76 4.80 4.85 4.90 4.91 4.98 5.00 5.05 5.10 5.11 5.16 5.18 5.20 5.22 5.30 5.31 5.40 5.41 5.50 5.56

.0984 .0995 .1004 .1015 .1024 .1040 .1043 .1063 .1065 .1083 .1094 .1100 .1102 .1110 .1122 .1130 .1142 .1160 .1162 .1181 .1200 .1220 .1250 .1260 .1285 .1299 .1339 .1360 .1378 .1405 .1406 .1417 .1440 .1457 .1470 .1495 .1496 .1520 .1535 .1540 .1562 .1570 .1575 .1590 .1610 .1614 .1654 .1660 .1693 .1695 .1719 .1730 .1732 .1770 .1772 .1800 .1811 .1820 .1850 .1875 .1890 .1910 .1929 .1935 .1960 .1969 .1990 .2008 .2010 .2031 .2040 .2047 .2055 .2087 .2090 .2126 .2130 .2165 .2188 5.60

5.61 5.70 5.79

.2210 .2244 .2280 5.80

5.94 5.95

.2340 .2344

5.60 .2205 2 5.70 1 5.80 .2283 5.90 .2323

5.90 A 15/64

Inches Equiv*

5.31 5.40 5.41 5.50 5.56 5.60

.2090 .2126 .2130 .2165 .2188 .2205

5.61 5.70 5.79 5.80 5.90 5.94 5.95 6.00 6.05 6.10 6.15 6.20 6.25 6.30 6.35 6.40 6.50 6.53 6.60 6.63 6.70 6.75 6.76 6.80 6.90 6.91 7.00 7.04 7.10 7.14 7.14 7.20 7.30 7.37 7.40 7.49 7.50 7.54 7.60 7.67 7.70 7.80 7.90 7.94 8.00 8.03 8.10 8.20 8.20 8.30 8.33 8.40 8.43 8.50 8.60 8.61 8.70 8.73 8.80 8.84 8.90 9.00 9.09 9.13 9.20 9.35 9.50 9.53 9.56 9.80 9.80 9.92 10.00 10.08 10.20 10.26 10.32 10.49

.2210 .2244 .2280 .2283 .2323 .2340 .2344 .2362 .2380 .2402 .2420 .2441 .2460 .2480 .2500 .2520 .2559 .2570 .2598 .2610 .2638 .2656 .2660 .2677 .2717 .2720 .2756 .2770 .2795 .2810 .2812 .2835 .2874 .2900 .2913 .2950 .2953 .2969 .2992 .3020 .3031 .3071 .3110 .3125 .3150 .3160 .3189 .3228 .3230 .3268 .3281 .3307 .3320 .3346 .3386 .3390 .3425 .3438 .3465 .3480 .3504 .3543 .3580 .3594 .3622 .3680 .3740 .3750 .3770 .3858 .3860 .3906 .3937 .3970 .4016 .4040 .4062 .4130

10.50 10.72 10.80 11.00 11.11 11.20

.4134 .4219 .4252 .4331 .4375 .4409

Drill Size Metric Fractional Gauge

10.80 11.00 7/16 11.20 11.50 29/64 11.80

2 5.70 1 5.80 5.90 A

2.50

mm Equiv*

15/64 6.00 B 6.10 C 6.20 D 6.30 1/4

6.40 6.50 F 6.60 G 6.70 17/64 H 6.80 6.90 I 7.00 J 7.10 K 9/32 7.20 7.30 L 7.40 M 7.50 19/64 7.60 N 7.70 7.80 7.90 5/16 8.00 O 8.10 8.20 P 8.30 21/64 8.40 Q 8.50 8.60 R 8.70 11/32 8.80 S 8.90 9.00 T 23/64 9.20 U 9.50 3/8 V 9.80 W 25/64 10.00 X 10.20 Y 13/32 Z 10.50 27/64 10.80 11.00 7/16 11.20

15/32 12.00 12.20 31/64 12.50 1/2 12.80 13.00 33/64 13.20 17/32 13.50 13.80 35/64 14.00 14.25 9/16 14.50 37/64 14.75 15.00 19/32 15.25 39/64 15.50 15.75 5/8 16.00 41/64 16.50 21/32 17.00 43/64 11/16 17.50 45/64 18.00 23/32 18.50 47/64 19.00 3/4 49/64 19.50 25/32 20.00 51/64 20.50 13/16 21.00 53/64 27/32 21.50 55/64 22.00 7/8 22.50 57/64 23.00 29/32 59/64 23.50 15/16 24.00 61/64 24.50 31/32 25.00 63/64 1â&#x20AC;?

mm Equiv*

Inches Equiv*

10.80 11.00 11.11 11.20 11.50 11.51 11.80 11.91 12.00 12.20 12.30 12.50 12.70 12.80 13.00 13.10 13.20 13.49 13.50 13.80 13.89 14.00 14.25 14.29 14.50 14.68 14.75 15.00 15.08 15.25 15.48 15.50 15.75 15.88 16.00 16.27 16.50 16.67 17.00 17.07 17.46 17.50 17.86 18.00 18.26 18.50 18.65 19.00 19.05 19.45 19.50 19.84 20.00 20.24 20.50 20.64 21.00 21.03 21.43 21.50 21.84 22.00

.4252 .4331 .4375 .4409 .4528 .4531 .4646 .4688 .4724 .4803 .4844 .4921 .5000 .5039 .5118 .5156 .5197 .5312 .5315 .5433 .5469 .5512 .5610 .5612 .5709 .5781 .5807 .5906 .5937 .6004 .6094 .6102 .6201 .6250 .6299 .6406 .6496 .6562 .6693 .6719 .6875 .6890 .7031 .7087 .7187 .7284 .7344 .7480 .7500 .7656 .7677 .7812 .7874 .7969 .8071 .8125 .8268 .8281 .8438 .8465 .8594 .8661

22.23 22.50 22.62 23.00 23.02 23.42 23.50 23.81 24.00 24.21 24.50 24.61 25.00 25.00 25.40

.8750 .8858 .8906 .9055 .9062 .9219 .9252 .9375 .9448 .9531 .9646 .9687 .9842 .9844 1.0000

Patience & Nicholson (NZ) Ltd accepts no liability for any loss or damage either direct or consequential arising out of or in relation to the use or application of the information or products referred to herein.

TECHNICAL SECTION

58 INDUSTRIAL QUALITY

drill & TAPPING CHART DRILL & TAPPING CHART BSW Whitworth* Size inch

Threads per inch

1/16* 3/32* 1/8 5/32* 3/16 7/32* 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2

60 48 40 32 24 24 20 18 16 14 12 12 11 10 9 8 7 7 6 5 4 1/2

Preferred mm

55° thread form Tapping Drill Sizes Alternative inch mm inch

1.2 1.9 2.55 3.2 3.7 4.5 5.1 6.5 7.9 9.5 10.5

3/64

13.5 16.5

17/32 41/64 3/4 55/64 31/32 1-3/32 1-5/16 1-17/32 1-49/64

1/8

5/16

1.05 1.75 2.5 2.95 3.6 4.3 5.0 6.4 7.8 9.2 12.0

22.0 28.0 33.5 39.0 44.5

16.0 19.0 24.5 27.5 33.0 38.5 44.0

UNC UNS*

3/32 9/64 11/64 3/16 1/4 19/64 23/64 13/32 15/32 33/64 5/8 47/64 27/32 61/64 1-5/64 1-19/64 1-33/64 1-3/4

60° thread form

Size inch

Threads per inch

No. 2 No.3 No. 4 No. 5 No. 6 No. 8 No.10 No. 12 1/8* 5/32* 3/16* 7/32* 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16* 3/4 13/16* 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2

56 48 40 40 32 32 24 24 40 32 24 24 20 18 16 14 13 12 11 11 10 10 9 8 7 7 6 6

Size inch

44 40 36 32 28 40 32 32 32 28 24 24 20 20 18 18 16 16 16 14 12 14 12 12 12 12

Pitch mm

2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0

0.40 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00

Preferred mm

1.65 2.1 2.55 2.95 3.4 3.8 4.3 5.1 6.1 6.9 7.9 8.6

12.2 14.25 15.75

60° thread form Tapping Drill Sizes Alternative inch mm inch

11/64 13/64

5/16 11/32 13/32 31/64 9/16 45/64 25/32 61/64 1-11/64 1-17/64

1.6 2.05 2.5 2.9 3.3 3.7 4.2 5.0 6.0 6.8 7.8 8.5 9.5 10.2 12.0 14.0 15.5 17.5 19.5 21.0 24.0 26.5 29.5 32.0

1/16

15/64 17/64

3/8 15/32 35/64 39/64 11/16 49/64 53/64 15/16 1-3/64 1-5/32 1-1/4

1.85 2.1 2.35 2.65 2.85 3.5 3.9 4.5 2.65 3.3 3.8 4.6 5.2 6.6 8.1 9.5 11.0 12.2 13.8 15.25

19.5

31.0

inch

3/32

5/32

13/64 17/64

Alternative mm inch

1.8 2.05 2.3 2.6 2.8 3.4 3.8 4.4 2.6 3.1 3.7 4.5 5.1 6.5 8.0

3/8 10.8 31/64 35/64 21/32 23/32 49/64 7/8 1-7/64 1-7/32 1-11/32

13.5 15.0 16.5 18.0 22.5 25.0 28.0 34.0

5/64

11/64 1/8

1/4 5/16 23/64 27/64 17/32 19/32 41/64

63/64 1-13/64 1-21/64

60° thread form

No. 5 No. 6 No. 8 No. 10 No. 12 1/8* 5/32* 3/16* 7/32* 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16* 3/4 13/16* 7/8 1 1* 1-1/8 1-1/4 1-3/8 1-1/2

Size mm

Tapping Drill Sizes Preferred

UNF UNS* Threads per inch

Metric ISO Coarse

Tapping Drill Sizes Preferred Alternative mm inch mm inch

2.7 2.95 3.6 4.1 4.7 2.65 3.3 4.1 4.9 5.5 6.9 8.5 10.0 11.5 14.5 16.0 17.5

23.5 26.5 33.0 36.0

9/64

7/32

25/64 29/64 33/64 37/64 5/8 11/16 3/4 13/16 59/64 15/16 1-3/64 1-11/64 1-19/64 1-27/64

2.65 2.9 3.5 4.0 4.6 2.6 3.1 3.9 4.8 5.4 6.8 8.4 9.8

5/32

1/8 5/32 3/16

12.8 15.75 19.0 20.5 23.5 29.5

Metric ISO Fine Size mm

Pitch mm

8.0 10.00 12.0 14.0 16.0 18.0 20.0 22.0 24.0

1.00 1.25 1.50 1.50 1.50 1.50 1.50 1.50 2.00

Preferred mm

7.1 8.9

9/32

14.75

27/64 1/2 37/64 21/32 47/64 13/16 7/8

BSF Size inch

Threads per inch

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4

32 26 22 20 18 16 16 14 12 11 10 9 8 7

60° thread form Tapping Drill Sizes Alternative inch mm inch

Preferred

7.0 8.8 10.5 12.5 14.5 16.5 18.5 20.5 22.0

11/32

55° thread form Tapping Drill Sizes Alternative mm inch

inch

4.0 5.3 6.8 8.3

5/32 17/64 21/64

14.0

7/16 1/2 35/64

28.5 34.5 40.5

25/32 57/64 1-1/8 1-23/64 1-19/32

3.9 5.2 6.7 8.2 9.5 11.0 12.5 13.8 16.5 19.5 22.5

40.0

13/64 5/16 3/8 27/64 31/64 17/32 21/32 49/64 7/8 1-7/64 1-11/32 1-37/64

47.5° thread form Tapping Drill Sizes

Size

Pitch mm

Preferred mm

inch

0 1 2 3 4 5 6 7 8 9 10 11 12

1.00 0.90 0.81 0.73 0.66 0.59 0.53 0.48 0.43 0.39 0.35 0.31 0.28

5.1 4.5 4.0 3.4 3.0 2.7 2.35 2.1 1.8 1.55 1.4 1.2 1.05

13/64 5/32

3/64

Metric Conduit Size mm

Pitch mm

16 20 25 32 40 50

1.5 1.5 1.5 1.5 1.5 1.5

Preferred

Alternative mm inch

5.0 4.4 3.9 3.3 2.95 2.6 2.25 2.0 1.75 1.5 1.35 1.15 1.0

11/64

inch

14.75

37/64 47/64 1-13/64

14.5 18.5 23.5 30.5 38.5 48.5

Size inch

Threads per inch

1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

28 19 19 14 14 11 11 11 11

55° thread form Tapping Drill Sizes With Reamer Without Reamer mm inch mm inch

8.0 10.8 14.25 23.0 29.0 37.5 43.5

5/16 27/64 9/16 45/64 29/32 1-9/64 1-15/32 1-23/32 2-5/32

BSPF (Parallel Pipe) Size inch

Threads per inch

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2 2-1/2 3

28 19 19 14 14 14 14 11 11 11 11 11 11

NPT (Taper Pipe) Size inch

Threads per inch

1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

27 18 18 14 14 11-1/2 11-1/2 11-1/2 11-1/2

Preferred mm

59/64 1-33/64 1-29/32

8.4 11.2 14.75

21/64 7/16 37/64 23/32 15/16 1-11/64 1-33/64 1-3/4 2-3/16

30.0 38.5 44.5

55° thread form Tapping Drill Sizes Alternative mm inch

inch

8.8 11.8 15.25 19.0 21.0 24.5

15/32

8.7 11.5 15.0

3/4 53/64 31/32 1-7/64 28.0 1-7/32 30.5 39.5 1-35/64 39.0 45.5 1-25/32 45.0 2-1/4 2-27/32 Hole size 3.369 - 3.344 inch

11/32 29/64 19/32 47/64 13/16 61/64

1-49/64

60° thread form Tapping Drill Sizes With Reamer Without Reamer mm inch mm inch

8.3 10.8 14.25 17.5 22.5 28.5 37.0 43.5

21/64 27/64 9/16 11/16 57/64 1-1/8 1-15/32 1-23/32 2-3/16

8.4 11.2 14.25 23.0 29.0 37.5 44.0

NPS (Parallel Pipe)

7/16 9/16 45/64 29/32 1-9/64 1-31/64 1-47/64 2-13/64

60° thread form

Size inch

Threads per inch

inch

Tapping Drill Sizes mm

inch

1/8 1/4 3/8 1/2

27 18 18 14

8.7 11.2 14.75 18.0

11/32 7/16 37/64 23/32

9.2 12.0 15.5 19.0

23/64 15/32 39/64 3/4

NPSC

NPSM

NPSC - Pressure tight coupling threadNPSM - Mechanical fastening thread

Brass Size inch

Threads per inch

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

26 26 26 26 26 26 26 26 26 26

Preferred mm

Size mm

Pitch mm

10.0 12.0 14.0 18.0

1.00 1.25 1.25 1.50

5.2 6.8 8.4 10.0 11.5 14.75

18.0 21.0 24.5

Preferred mm

Threads per inch

5/8 3/4 1 1-1/4 1-1/2 2

18 16 16 16 14 14

13/64 17/64 21/64 25/64 29/64 33/64 37/64 45/64 53/64 61/64

60° thread form Tapping Drill Sizes Alternative mm inch

inch

23/64

9.0

10.5 12.5

13/32 41/64

BS Conduit Size inch

55° thread form Tapping Drill Sizes Alternative inch mm inch

5.3 6.9 8.5 10.2 11.8 13.2

Spark Plug 5/64

60° thread form Tapping Drill Sizes Alternative mm inch

BSPT (Taper Pipe)

Preferred mm

55° thread form Tapping Drill Sizes Alternative mm inch

inch

14.25 17.0 23.5 30.0 36.0 48.5

9/16 43/64 59/64 1-11/64

TECHNICAL SECTION

59 INDUSTRIAL QUALITY

DRILL USE & Maintenance Web Thinning

Feeds

On most drills the web increases in thickness towards the shank with the result that, as the drill is shortened by repeated sharpening, the chisel edge will become wider. As the chisel edge does not cut but forces the metal out of the way, too wide a chisel edge will result in more pressure required for penetration, leading to greater heat generation and a resultant loss of life.

The feed of the drill is governed by the drill size and the component material. As with speeds, an increase in feed will lessen the number of holes produced sharpening but it is essential that a constant feed be maintained. If a drill is allowed to dwell, breakdown of the cutting edges will result.

HOLD ORIGINAL THICKNESS

Cutting Fluids The use of cutting fluids is an advantage in most drilling operations and essential in some. The two main functions of the cutting fluid are lubrication and cooling. The purpose of lubrication is to reduce friction by lubricating the surfaces tool and work, to facilitate easier sliding of the chips up the flute and to prevent the chips welding to the cutting edges. In production work, particularly when drilling deep holes, the cooling action of the fluid is often more important than the lubrication. Overheating will shorten the life of the drill. Intermittent feed on deep holes, where possible, not only clears the chips but permits more effective cooling.

Speeds

Small Drill Feeds and Speeds Breakdown of small drills can most often be attributed to two faults: speed too high and feed too low. A feed which will produce CHIPS not POWDER, coupled with a speed compatible with the strength of the drill is essential for small hole drilling. Feeds must be based on thickness of chip, not mm/min, and speeds adjusted accordingly. EXAMPLE: A 1mm drill is to operate at a feed of 0.013mm /rev, drilling steel. While the material may permit a speed of 30m/min or 9,500 RPM it is obvious that the drill could not withstand a load of 0.013mm feed at this speed; a penetration rate of 124mm/min. The correct procedure is to retain the feed but reduce the speed to obtain a penetration within the capacity of the strength of the drill.

Deep Hole Drilling When drilling deep holes, speeds and feeds should be reduced as follows:

DEPTH OF HOLE

REDUCTION PER CENT % SPEED

FEED

3 times drill diameter

4 times drill diameter

5 times drill diameter

35 to 40

6 to 8 times drill diameter

The speed of a drill is the rate at which the periphery of the drill moves in relation to the work being drilled. As a rule, with a drill working within its speed range for a specific material, more holes between sharpenings will be achieved if the speed is reduced and less holes if the speed is increased. Thus, for each production run, a speed must be established which will result in the highest rate of production without excessive breakdown time or drill usage. The factors governing speed are: Component material, hardness of material, depth of hole, quality required, condition of drilling machine, efficiency of cutting fluid.

60 INDUSTRIAL QUALITY

TECHNICAL SECTION

TWIST DRILL

STANDARD

POINT RELIEVED

POINT THINNED

CENTRE CUTTING (CRANKSHAFT SPLIT STYLE)

HEAVY DUTY HIGH TENSILE NOTCH

LONG POINT

FLAT POINT

DOUBLE POINT ANGLE

Black Jet/Blue Bullet Jobber Drills Evacut “Black Jet” and Sutton “Blue Bullet” jobber drills provide ultimate performance and value for money. You get 2-3 times more life when drilling ferrous materials e.g.: stainless steel, high tensile steel, alloy and tool steels and cast iron. What is the difference: a ferric-oxide (Fe2O3) surface coating improves heat dissipation, lowers friction and reduces material build up on the cutting edge, hole accuracy and size is improved in production applications and provides longer tooling life at the same feeds and speeds of conventional bright drills.

Silver/Bright Finish Jobber Drills The silver or bright finish jobber drills are made from the same quality material as the Black Jet/Blue Bullet drills. The shiny smooth surface finish makes them more suited for repetitive drilling in non-ferrous material like aluminium and brass when the softer sticky material can bind to the cutting edge.

* Tool life and finish quality will be increased by using a suitable coolant/lubricant

TECHNICAL SECTION

61 INDUSTRIAL QUALITY

TWIST DRILL Twist Drill Nomenclature Circular Land

Relative Lip Height

Body Clearance

Body Clearance Diameter

Land

Chisel Edge

Flute Length Body Length

Flute Heel

Overall Length

Point

Helix Angle

Flank

Heel Depth of Body Clearance

Overall Length

Diameter

Point Angle

Web or Core Thickness

Chisel Edge Angle

Lip Length

Face

Shank Length

Straight Shank

Reduced Shank

Outer Corner

Shank Length Lip Clearance Angle

Drill Axis

Rake Angle (Helix angle at periphery)

Drill Axis

Enlarged View of Clearance

THE BODY

FLUTE LENGTH

lip length

The portion of the drill extending from the extreme cutting end to the commencement of the shank.

The axial length from the outer corners of the cutting lips to the extreme back end of the flutes, including point.

BODY CLEARANCE

Helix angle

The minimum distance between the outer corner and the chisel edge corner or inner corner. (For a straight lip, it is the true length of the lip).

The portion of the body reduced in the diameter to provide diametrical clearance.

The acute angle between the tangent to the helical leading edge of the flute at a point in this edge and a plane containing (drill and helix) axis and the point in question. This angle lies in a plane normal to the radius at the point on the edge. The helix angle is usually measured at a point close to or coincident with the outer corner.

Chisel edge angle The obtuse angle between the tangent to the projection of the chisel edge axis and the projection of the line through either outer corner and corresponding chisel edge corner on a plane normal to the drill axis. This angle lies in a plane normal to the drill axis.

Drill diameter The measurement across the cylindrical lands at the outer corners of the drill.

lip clearance angle The acute angle between a plane normal to the drill axis and the tangent at a point on the lip to the drill flank, in a plane normal to the radius at the point in question. This angle is specified and measured at the outer corner.

point angle The included angle between the projections of the lines joining the outer corners and the corresponding chisel edge corners on a plane parallel to one (or both) of these lines and the drill axis.

Web (core) thickness The diameter of the circle normal to the axis through the roots of the flutes at the point end of the drill.

flutes The grooves in the body of the drill which provide lips and permit the removal of chips and allow cutting fluid to reach the lips.

EZE-LAP DIAMOND SHARPENERS

Item No.

DESCRIPTION

EZE-LAP

DIAMOND SHARPENERS

Flat Diamond Stones

EZ61M 2” x 6” Stone – 270g EZ62F 2” x 6” Stone on walnut block – 600g EZ71F 2” x 8” Stone – 600g EZ71M 2” x 8” Stone – 270g These diamond stones are perfect for hunting and fishing knives, woodworking tools including planer blades and chisels, axes, spades and industrial use. No oil or water is necessary. The surface will remain flat and true. FISH HOOk SHARPENERS

EZS

Fish hook sharpener with 2.1/4” ‘D’ shaped shaft that stores into pen type cap

CHAINSAW SHARPENERS

EZCSK EZCSG-5/32 EZCSG-3/16 EZCSG-7/32

Chainsaw sharpening kit 12 volt with 3 cutters 5/32” Chainsaw sharpener with guide 3/16” Chainsaw sharpener with guide 7/32” Chainsaw sharpener with guide

DIAMOND HONES

EZLF EZLM EZLC

3/4”x 2” Fine diamond pad – red handle 3/4 x 2” Medium diamond pad – purple handle 3/4 x 2” Coarse diamond pad – black handle

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

HAND TOOLS DRILL SETS, PANEL DRILLS, SPADE BITS, HOLESAWS, JIGSAW BLADEs SETS & CUTTING TOOLS

Item No.

Description

13 Piece Imperial HSS Drill Set 21 Piece Imperial HSS Drill Set 29 Piece Imperial HSS Drill Set 13 Piece Metric HSS Drill Set 19 Piece Metric HSS Drill Set 25 Piece Metric HSS Drill Set 8 Piece Masonry Drill Set 8 Piece Wood Drill Set 7 Piece SDS Masonry Drill Set 7 Piece Masonry Drill Set 17 Piece SDS Masonry Drill Set 300 Piece Drill and Plug Set Tip Tool Drill Kit

PANEL DRILLS

S92365 S92366

No.30 Double Ended Twinpack Panel Drill No.30 Double Ended 10 Pack Panel Drill

SPADE BIT SETS

S92345 S92458 S92452 S92286

6 Piece Feeding Spade Set 3 Piece Spade Bit Set 6 Piece Spade Bit Set 5 Piece Spade Bit Set

HOLESAWS

S92348 S338369005 S338369007 S338369009 S338369014 S92276 S92278 S92288 S92268 S390155106 S390155105 S390155120

7 Piece Bi-Metal Holesaw Set Holesaw Bi-Metal Set No. 5 General Set Holesaw Bi-Metal Set No.7 Plumbers Set Holesaw Bi-Metal Set No.9 Electricians Set Holesaw Bi-Metal Set No.14 General Purpose Set 7 Piece Deep Cut Holesaw Set 11 Piece Holesaw Set 5 Piece Holesaw and Mandrel Set 4 Piece Lock Install Set Holesaw Set 6 Piece CNH-06 Holesaw Set 5 Piece CNH-05 Holesaw Lock Installation Kit CNLK10

JIGSAW BLADE SETS

S92308 S92342 S92340

8 Piece Jigsaw Blade Set Jigsaw Blade Set 10 Piece Bosch Jigsaw Blade Set 10 Piece Universal

CUTTING TOOLS

S92339 S92341 S92343 S92333 S92335 S92329 S92331

Wheel Diamond Segmented 105mm Wheel Diamond Continuous 105mm Wheel Diamond Turbo 105mm TCT Glass Cutter Basic TCT Glass Cutter Premium Multi Purpose Shears Stainless Steel 180mm Stainless Steel Multi Purpose Scissors

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

FROST

S92250 S92252 S92254 S92256 S92258 S92260 S92266 S92270 S92355 S92356 S92346 S92284 S390040012

HAND TOOLS

Drill Sets

HAND TOOLS Hacksaw Blades, Screwdrivers & Bits, Snips, Pliers, Levels & THREADING TOOLS

Item No.

Description

FROST

HAND TOOLS

HACKSAW BLADES

S390095103 S390095110 SCREWDRIVERS S92445 S92446 S92447 S92448 S92449 S92450 S92463

3 Pack Junior Hacksaw Blades 32T 10 Pack Juior Hacksaw Blades 32T Screwdriver Slotted 4.0 x 100mm 1000 Volt - VDE Screwdriver Slotted 5.5 x 125mm 1000 Volt - VDE Screwdriver Slotted 6.5 x 150mm 1000 Volt - VDE Screwdriver Phillips No.1 x 80mm 1000 Volt - VDE Screwdriver Phillips No.2 x 100mm 1000 Volt - VDE Screwdriver Phillips No.3 x 150mm 1000 Volt - VDE 6 Piece Screwdriver Set (4.0, 5.5, 6.5 Slotted & No.1, 2 & 3 Phillips)

SCREWDRIVER BITS

S92290 S92210 S92211 SNIPS S92455 S92456 S92457 PLIERS S92442 S92443 S92444

7 Piece Screwdriver Dial a Bit Set Screwdriver Bits PH#2 25mm 10 Piece Screwdriver Bits PH#2 50mm 10 Piece Aviation Snips Chrome Molybdenum Soft Grip Left Hand Cut Aviation Snips Chrome Molybdenum Soft Grip Right Hand Cut Aviation Snips Chrome Molydbenum Soft Grip Straight Cut Linesman Pliers 20mm 1000 Volt VDE certified handles Longnose Pliers 200mm 1000 Volt VDE certified handles Diagonal Pliers 180mm 1000 Volt VDE certified handles

LEVELS

S92453 S92441

I Beam Level 600mm Magnetic Torpedo Level 225mm Magnetic

HACKSAWS & SAWS

S92438 S92437 S92451 S390105110 S92213

Panel Saw Soft Grip 450mm Plasterboard Saw Soft Grip 200mm Hacksaw Close Quarter 300mm Hacksaw Junior & Mitre Box Hacksaw Pro Soft Grip

KNIFE

S92203

Knife Utility Quick Change with Auto Feed

THREADING TOOLS

S394098025 S394098026 S92196 S92197 S92198 S92199 S92200 S92201 S92202 S92369

40 Piece Tap and Die Set Metric 40 Piece Tap and Die Set Imperial Tap Set 3 Piece Metric (M5 x 0.8, M6 x 1.0 & M8 1.25 intermediate taps) 3 Piece Imperial Taps (5/16", 1/4"& 3/16" intermadiate taps) UNC 3 Piece Metric Die Set 3 Piece Imperial Die Set 1/4" Tap Wrench (M3 - M6) 1/2" Tap Wrench (M7 - M12) 1" Die Handle Screw Extractor Set 5 Piece

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

HAND TOOLS

Hammers, MeasurING TAPES & Miscellaneous

Item No.

Description

HAMMER

S92436

Hammer Claw Soft Grip All Steel 560g

TAPE MEASURE

S92439

Tape Measure Stainless Steel 25mm x 8m/27ft 35mm Forstner Bit 4 Way Chuck Key 10 Piece Mounted Stone Set 3 Piece Countersink Set 90 Degree Countersink CSF-I up to 1/2" Ezi Sizer Guage Hex Key Set Metric CR-V Pipe Cutter 6-25mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

FROST

S92262 S92282 S92294 S92296 S390035010 S390230110 S92440 S92454

HAND TOOLS

MISCELLANEOUS

abrasive flap wheels shaft mounted abrasive flap wheels

Item No.

DISC DIA.

WIDTH

GRIT

SHAFT SIZE

20mm 20mm 20mm 30mm 30mm 30mm

120 medium 80 coarse 180 fine 180 fine 120 medium 80 coarse

6mm 6mm 6mm 6mm 6mm 6mm

15mm 10mm 10mm 15mm 15mm 15mm 20mm 20mm 20mm 25mm 25mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm

120 80 180 80 120 180 80 120 180 80 120 60 80 100 120 150 180 240 40 60 80 100 120 150 180 240 60 80 100 120 150 180 240

6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 3mm 3mm 3mm 3mm 3mm 3mm 3mm

GARRYSON

ABRASIVE FLAP WHEELS

Shaft mounted Abrasive Flap wheels – Individually carded

GA5020M GA5020C GA5020F GA6030F GA6030M GA6030C

50mm 50mm 50mm 60mm 60mm 60mm

Shaft mounted Abrasive Flap wheels – 10 per box

GA1515120 GA2010080 GA2010180 GA2015080 GA2015120 GA2015180 GA2020080 GA2020120 GA2020180 GA2525080 GA2525120 GA3010L060 GA3010L080 GA3010L100 GA3010L120 GA3010L150 GA3010L180 GA3010L240 GA3015L040 GA3015L060 GA3015L080 GA3015L100 GA3015L120 GA3015L150 GA3015L180 GA3015L240 GA3010060 GA3010080 GA3010100 GA3010120 GA3010150 GA3010180 GA3010240

15mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 25mm 25mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

abrasive flap wheels shaft mounted abrasive flap wheels

Item No.

DISC DIA.

WIDTH

GRIT

SHAFT SIZE

15mm 15mm 15mm 15mm 15mm 15mm 15mm 10mm 10mm 10mm 10mm 10mm 10mm 15mm 15mm 15mm 15mm 15mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 25mm 25mm 30mm 30mm 30mm 10mm 10mm 10mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm 15mm

40 60 80 100 120 150 180 40 60 80 100 120 150 40 60 80 120 180 40 60 80 100 120 150 180 60 80 80 100 120 80 120 150 60 80 100 120 150 180 240 320

3mm 3mm 3mm 3mm 3mm 3mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

30mm 30mm 30mm 30mm 30mm 30mm 30mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 40mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GARRYSON

GA3015040 GA3015060 GA3015080 GA3015100 GA3015120 GA3015150 GA3015180 GA4010040 GA4010060 GA4010080 GA4010100 GA4010120 GA4010150 GA4015040 GA4015060 GA4015080 GA4015120 GA4015180 GA4020040 GA4020060 GA4020080 GA4020100 GA4020120 GA4020150 GA4020180 GA4025060 GA4025080 GA4030080 GA4030100 GA4030120 GA5010080 GA5010120 GA5010150 GA5015060 GA5015080 GA5015100 GA5015120 GA5015150 GA5015180 GA5015240 GA5015320

ABRASIVE FLAP WHEELS

Shaft mounted Abrasive Flap wheels â&#x20AC;&#x201C; 10 per box

ABRASIVE FLAP WHEELS shaft mounted abrasive flap wheels

Item No.

DISC DIA.

WIDTH

GRIT

SHAFT SIZE

20mm 20mm 20mm 20mm 20mm 20mm 20mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 30mm 30mm 40mm 40mm 20mm 20mm 25mm 25mm 25mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm

40 60 80 100 120 180 240 40 60 80 100 120 150 180 240 320 80 120 60 80 80 120 60 80 120 60 80 100 120 240 40 60 80 120 150 240

6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

GARRYSON

ABRASIVE FLAP WHEELS

Shaft mounted Abrasive Flap wheels â&#x20AC;&#x201C; 10 per box

GA5020040 GA5020060 GA5020080 GA5020100 GA5020120 GA5020180 GA5020240 GA5025040 GA5025060 GA5025080 GA5025100 GA5025120 GA5025150 GA5025180 GA5025240 GA5025320 GA5030080 GA5030120 GA5040060 GA5040080 GA6020080 GA6020120 GA6025060 GA6025080 GA6025120 GA6030060 GA6030080 GA6030100 GA6030120 GA6030240 GA8030040 GA8030060 GA8030080 GA8030120 GA8030150 GA8030240

50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 50mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm 60mm 80mm 80mm 80mm 80mm 80mm 80mm

Flap wheel trial kits GASMTK Comprises of:1 x 15mm x 15mm 120 grit 1 x 25mm x 10mm 80 grit 1 x 20mm x 15mm 120 grit 1 x 25mm x 20mm 80 grit 2 x 50mm x 20mm 80/120 grits 1 x 20mm x 20mm 80 grit 1 x 25mm x 20mm 180 grit 1 x 25mm x 5mm 180grit 1 x 25mm x 25mm 80 grit

GASATK Comprises of: 1 x 40mm x 15mm 60 grit 1 x 60mm x 30mm 60 grit 2 x 40mm x 15mm 80/120 grits 2 x 60mm x 30mm 80/120 grits 1 x 20mm x 10mm 180 grit 1 x 25mm x 15mm 120 grit 1 x 50mm x 20mm 60 grit 1 x 60mm x 40mm 80 grit 2 x 50mm x 20mm 80/120 grits

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

ABRASIVE flap wheels & ZIRCONIUM FLAP DISCS shaft mounted abrasive flap wheels

Item No.

DISC DIA.

WIDTH

GRIT

RPM

50mm 50mm 50mm 25mm

120 180 320 40

5,000 5,000 5,000 5,000

165mm 165mm 165mm 165mm

abrasive blocks Item No.

GRIT

SIZE

COLOUR

GA060B GA120G GA240B

coarse medium fine

80x50x20mm 80x50x20mm 80x50x20mm

BLUE GREY BROWN

ALUMINIUM FLAP DISCS Item No.

DISC DIA.

BORE

GRIT

MAX RPM

STD PACK

16mm 16mm 16mm 16mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm

40 60 80 120 40 60 80 120 40 60 80 120 40 60

15,000 15,000 15,000 15,000 13,000 13,000 13,000 13,000 12,000 12,000 12,000 12,000 8,600 8,600

10 10 10 10 10 10 10 10 10 10 10 10 10 10

TYPE A ALUMINIUM BACKED ANGLE FACE -FAZ

GA10016040 GA10016060 GA10016080 GA10016120 GA11522040 GA11522060 GA11522080 GA11522120 GA12722040 GA12722060 GA12722080 GA12722120 GA18022040 GA18022060

100mm 100mm 100mm 100mm 115mm 115mm 115mm 115mm 127mm 127mm 127mm 127mm 180mm 180mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GARRYSON

GA16550120 GA16550180 GA16550320 GA16525040 Available to order only.

ABRASIVE FLAP WHEELS

ABRASIVE FLAP WHEELS - 10 PER BOX

FIBRE & ZIRCONIUM FLAP DISCS

Item No.

DISC DIA.

BORE

GRIT

MAX RPM

STD PACK

16mm 16mm 16mm 16mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm 22mm

40 60 80 120 40 60 80 120 40 60 80 120 40 60 80

15,000 15,000 15,000 15,000 13,000 13,000 13,000 13,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

GARRYSON

zirconium flap discs

TYPE B FIBRE BACKED ANGLE FACE - FBZ

GAFA10016040 GAFA10016060 GAFA10016080 GAFA10016120 GAFA11522040 GAFA11522060 GAFA11522080 GAFA11522120 GAFA12722040 GAFA12722060 GAFA12722080 GAFA12722120 GAFA18022040 GAFA18022060 GAFA18022080

100mm 100mm 100mm 100mm 115mm 115mm 115mm 115mm 127mm 127mm 127mm 127mm 180mm 180mm 180mm

ZIRCONIUM FLAP DISCS Item No.

DISC DIA.

BORE

GRIT

MAX RPM

ZIRCONIUM FLEXIDISCS - FIBRE BACKED - FLXZ

GAFLZ11522040 115mm 22mm 40 13,300 GAFLZ11522060 115mm 22mm 60 13,300 GAFLZ11522080 115mm 22mm 80 13,300 GAFLZ11522120 115mm 22mm 120 13,300 Very good for blending & finishing on curved surfaces. Industry types: Stainless steel fabricators, Ship building & repair, Offshore & marine, Metal fabrication. ZIRCONIUM JUMBO FLAP DISCS - FIBRE BACKED ANGLE FACE - JBZ

GAJBZ10016040 100mm 16mm 40 15,300 GAJBZ10016060 100mm 16mm 60 15,300 GAJBZ10016080 100mm 16mm 80 15,300 GAJBZ11522040 115mm 22mm 40 13,300 GAJBZ11522060 115mm 22mm 60 13,300 GAJBZ11522080 115mm 22mm 80 13,300 GAJBZ12722040 127mm 22mm 40 12,000 GAJBZ12722060 127mm 22mm 60 12,000 GAJBZ12722080 127mm 22mm 80 12,000 Gives longer disc life & finer finish. 60% more cloth than a std flap disc. Industry type: Stainless steel fabricators, Ship builders, Metal fabrication, Automotive, Foundries.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

ZIRCONIUM FLAP DISCS

Item No.

DISC DIA.

BORE

GRIT

MAX RPM

ALUMINIUM OXIDE SAFTEX WHEELS & ARBORS Item No.

DISC DIA.

WIDTH

GRIT

SHAFT SIZE

Saftex wheels – aluminium oxide grade A54Z2K GAS20031 2" 1/32" 3/8" 30,500 GAS20062 2" 1/16" 3/8" 30,500 GAS20093 2" 3/32" 3/8" 30,500 GAS20125 2" 1/8" 3/8" 30,500 GAS25031 2 1/2" 1/32" 3/8" 24,400 GAS25062 2 1/2" 1/16" 3/8" 24,400 GAS25093 2 1/2" 3/32" 3/8" 24,400 GAS25125 2 1/2" 1/8" 3/8" 24,400 GAS30031 3" 1/32" 3/8" 20,300 GAS30062 3" 1/16" 3/8" 20,300 GAS30093 3" 3/32" 3/8" 20,300 GAS30125 3" 1/8" 3/8" 20,300 GAS40031 4" 1/32" 3/8" 15,280 GAS40062 4" 1/16" 3/8" 15,280 Arbors for mounting Saftex wheels with 3/8” centre hole GAS3814 Arbor 1/4” dia shank. for all wheel widths GAS3806 Arbor 6mm dia shank. for all wheel widths SAFTEX WHEELS-FIBRE GLASS REINFORCED STRAIGHT WHEELS FOR THE TOUGH JOBS!! Saftex Die Grinder wheels are reinforced with woven fibre glass of the highest tensile strength enabling them to withstand severe peripheral, side and wedge stress. They are recommended for preparing, cut-off, notching and slotting and grinding out defects on a wide range of materials, including Ceramics, Mild Steel, Aluminium, Titanium and Nimonics.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GARRYSON

GAFBX10016040 100mm 16mm 40 15,300 GAFBX10016060 100mm 16mm 60 15,300 GAFBX10016080 100mm 16mm 80 15,300 GAFBX11522040 115mm 22mm 40 13,300 GAFBX11522060 115mm 22mm 60 13,300 GAFBX11522080 115mm 22mm 80 13,300 GAFBX12722040 127mm 22mm 40 12,000 GAFBX12722060 127mm 22mm 60 12,000 GAFBX12722080 127mm 22mm 80 12,000 Rapid stock removal, lubricates & dissipates heat, withstands aggressive use. Industry types: Stainless Steel fabricators, Ship building & repair, Offshore & marine, Metal fabrication, Vessel & tanker manufacture.

ZIRCONIUM FLAP DISCS

TYPE B ZIRCONIUM PLUS FLAP DISCS - FIBRE BACKED ANGLE FACE - FBX

HUNTINGTON DRESSER WHEELS & ACCESSORIES

HUNTINGTON

DRESSER WHEELS & ACCESSORIES

Item No. COMPLETE HOLDERS HU0 HU1 HU2 REPLACEMENT CUTTERS HU0C HU1C HU2C REPLACEMENT PARTS HU0BU HU1BU HU2BU HU1SW HU2SW HU0SP HU1SP HU2SP

DESCRIPTION No.0 Dresser For Up To 1"Wheels No.1 Dresser 1"-2 1/4Wide Wheels No.2 Dresser Over 2 1/4 Wheel Dresser Cutters Only For #0 Dresser Cutters Only For #1 Dresser Cutters Only For #2 Huntington No 0 Side Bushes Huntington No 1 Cutter Bush Huntington No 2 Cutter Bush Huntington No 1 Side Washers Huntington No 2 Side Washers Huntington No 0 Spindle Huntington No 1 Spindle Huntington No 2 Spindle

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GLOVE RANGE

Box Handler Glove - S Box Handler Glove - M Box Handler Glove - L Box Handler Glove - XL Box Hanxler Glove - XXL

COLD CONDITION DIGITAL CAMO BEST USES: Hunting, Fishing, Outdoor Recreation, Military

ICCCDC02S ICCCDC03M ICCCDC04L ICCCDC05XL ICCCDC06XXL

Cold Cond Digital Camo - S Cold Cond Digital Camo - M Cold Cond Digital Camo - L Cold Cond Digital Camo - XL Cold Cond Digital Camo - XXL

COLD CONDITION BEST USES: Equipment Operation, Hand and Powertool Use, Cold Storage, Hunting/Fishing, Industrial Safety

ICCCG02S ICCCG03M ICCCG04L ICCCG05XL ICCCG06XXL

Cold Condition - S Cold Condition - M Cold Condition - L Cold Condition - XL Cold Condition - XXL

GORE-TEX TUNDRA BEST USES: Cold Weather Equipment Operation, Material Handling, Winter Resort Operations, Forestry, Search and Rescue, Frozen/Cold Storage

ICCCTG02S ICCCTG03M ICCCTG04L ICCCTG05XL ICCCTG06XXL

Gore-Tex Tundra Glove - S Gore-Tex Tundra Glove - M Gore-Tex Tundra Glove - L Gore-Tex Tundra Glove - XL Gore-Tex Tundra Glove - XXL

COLD CONDITION WATERPROOF BEST USES: Cold Weather Construction, Ocean and Airport Operations, Winter Resort Operations, Equipment Operation, Transportation, Recreation

ICCCW02S Cold Condition Water Proof Glove - S (Waterproof) ICCCW03M Cold Condition Water Proof Glove - M (Waterproof) ICCCW04L Cold Condition Water Proof Glove - L (Waterproof) ICCCW05XL Cold Condition Water Proof Glove - XL (Waterproof) ICCCW06XXL Cold Condition Water Proof Glove - XXL (Waterproof) FRAMER Best Uses: Framing/Carpentry, Electrical Set-up, Rigging, Tire Mounting, Trigger Control for Power Tools/Weapons ICFUG02S Framer Glove - S ICFUG03M Framer Glove - M ICFUG04L Framer Glove - L ICFUG05XL Framer Glove - XL ICFUG06XXL Framer Glove - XXL HEAVY UTILITY BEST USES: Contruction, Material Handling, Demolition, Landscaping, Forestry/Arborists, Lumberyards, Cable and Wire Work

ICHUG02S ICHUG03M ICHUG04L ICHUG05XL ICHUG06XXL

Heavy Utility Glove - S Heavy Utiility Glove - M Heavy Utiility Glove - L Heavy Utility Glove - XL Heavy Utility Glove - XXL

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GLOVE RANGE

ICBHG02S ICBHG03M ICBHG04L ICBHG05XL ICBHG06XXL

IRONCLAD

Item No. DESCRIPTION BOX HANDLER BEST USES: Package Handling/Deliver, Automotive Repair, Glass, Metal, Ceramic Handling, Hand and Power Tools

GLOVE RANGE

Item No. DESCRIPTION HEAVY UTILITY LANDSCAPER BEST USES: Landscaping, Forestry, Lumberyards, Construction, Materials Handling, Cable and Wire Work

GLOVE RANGE

IRONCLAD

ICHUL03M ICHUL04L ICHUL05XL

Heavy Utility Landscaper Glove - M Heavy Utility Landscaper Glove - L Heavy Utility Landscaper Glove - XL HEATWORX UTILITY BEST USES: Fabrication, Metal Working, Mfg/Assembly, Automotive, Plumbing - Ultility GLove ICHW302S Heatworx 300 - S ICHW303M Heatworx 300 - M ICHW304L Heatworx 300 - L ICHW305XL Heatworx 300 - XL ICHW306XXL Heatworx 300 - XXL HEATWORX REINFORCED BEST USES: Fabrication, Metal Working, Light Welding, Hi-Temp Automotive Work - Heavy Duty Glove ICHW402S Heatworx 450 - S ICHW403M Heatworx 450 - M ICHW404L Heatworx 450 - L ICHW405XL Heatworx 450 - XL ICHW405XXL Heatworx 450 - XXL HEATWORX HEAVY DUTY BEST USES: Fabrication, Metal Working, Mfg/Assembly, Hi-Temp Automotive Work ICHW602S Heatworx 600 - S ICHW603M Heatworx 600 - M ICHW604L Heatworx 600 - L ICHW605XL Heatworx 600 - XL ICHW604XXL Heatworx 600 - XXL KONG BEST USES: High Visibility Work, Industrial/Safety ICIKG04L Kong Glove - L ICIKG05XL Kong Glove - XL I-VIZ REFLECTIVE BEST USES: Roadside Construction and Maintenance, Traffic and Event Control, Search and Rescue Glove ICIVO-03-M I-Viz Reflective - M ICIVO-04-L I-Viz Reflective - L ICIVO-05-XL I-Viz Reflective - XL MACH-5 BEST USES: Mechanics, Machinists, Hand and Power Tool Use, Light Construction, Recreation, Rigging, Installations ICMFG03M Mach 5 Glove - M ICMFG04L Mach 5 Glove - L ICMFG05XL Mach 5 Glove - XL MACH-5 VIBRATION IMPACT BEST USES: Power Tool Use, Machine Shops, Equipment Operations ICMFI02S Mach 5 Impact Glove - S ICMFI03M Mach 5 Impact Glove - M ICMFI04L Mach 5 Impact Glove - L ICMFI05XL Mach 5 Impact Glove - XL ICMFI06XXL Mach 5 Impact Glove - XXL RANCHWORX COWBOY BEST USES: Landscaping/Gardening, Equipment Operation, Construction, Driving, Delivery ICRWC03M Ranchworx Cowboy Glove - M ICRWC04L Ranchworx Cowboy Glove - L ICRWC05XL Ranchworx Cowboy Glove - XL

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GLOVE RANGE

Ranchworx Glove - S Ranchworx Glove - M Ranchworx Glove - L Ranchworx Glove - XL Ranchworx Glove - XXL SUPER DUTY BEST USES: Automotive, Contruction, Demolition, Delivery, Equipment Operation, Industrial Maintenance/Operation, Recreation ICSDG04L Super duty Glove - L ICSDG05XL Super duty Glove - XL SUMMIT BEST USES: Driving, Recreation, Outdoor Chores, Casual ICSMB03M Summit Fleece Glove - M ICSMB04L Summit Fleece Glove - L ICSMB05XL Summit Fleece Glove - XL TAC OPS BEST USES: Law Enforcement, Militry, Entertainment, Recreation Glove ICTOG03M Tac-Ops - M ICTOG04L Tac-Ops - L ICTOG05XL Tac-Ops - XL WORKCREW BEST USES: Home Shop, Yard, Light Construction, Maintenance, Transportation ICWCG02S Workcrew Glove - S ICWCG03M Workcrew Glove - M ICWCG04L Workcrew Glove - L ICWCG05XL Workcrew Glove - XL ICWCG06XXL Workcrew Glove - XXL WRENCHWORX VIBRATION IMPACT BEST USES: Powertool Use, Vibrating and Impact Tool Use, Heavy Equipment Operation Glove ICWWI02S Wrenchworx Impact - S ICWWI03M Wrenchworx Impact - M ICWWI04L Wrenchworx Impact - L ICWWI05XL Wrenchworx Impact - XL ICWWI06XXL Wrenchworx Impact - XXL WRENCHWORX BEST USES: Professional Mechanics, Powersports, Hand and Power Tool Use ICWWX02S Wrenchworx Glove - S ICWWX03M Wrenchworx Glove - M ICWWX04L Wrenchworx Glove - L ICWWX05XL Wrenchworx Glove - XL ICWWX06XXL Wrenchworx Glove - XXL

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

GLOVE RANGE

ICRWG02S ICRWG03M ICRWG04L ICRWG05XL ICRWG06XXL

IRONCLAD

Item No. DESCRIPTION RANCHWORX BEST USES: Ranching/Forestry, Plumbing/HVAC, Search and Rescue, Heavy Equipment Operation, Driving, Construction, Heavy Cable or Wire Handling

JAMEC PEM

MASTER & TRADE PACKS

MASTER & TRADE ASSORTMENT PACKS

Item No. Master packs

description

JP102.512 JP102.523 JP102.534 JP102.545 JP102.556 JP102.567 JP102.578 JP102.589 JP102.612

Self Tapper Screws 1490 Piece Hi-Tensile Bolts,Nuts and Washers 825 Piece Machine Screws, Nuts and Washers 2825 Piece Hex Flange Bolts and Nuts 420 Piece Rubber O-Rings 810 Piece Washers 1395 Piece Split Pins 1020 Piece Hose Clamps 76 Piece Organiser Carry Case 23 Piece

Trade Packs

JP102.11 JP102.115 JP102.12 JP102.125 JP102.13 JP102.135 JP102.14 JP102.145 JP102.15 JP102.155 JP102.2 JP102.21 JP102.221 JP102.232 JP102.243 JP102.254 JP102.265 JP102.276 JP102.287 JP102.298 JP102.312 JP102.323 JP102.334 JP102.345 JP102.356 JP102.367 JP102.378 JP102.389 JP102.39 JP102.412 JP102.423 JP102.434

Split Pins 600 Piece Rubber O-Rings 400 Piece Spring and Internal Star Washers 720 Piece Aluminium Blind Rivets 595 Piece Flat Steel Washers 650 Piece Phillips Pan Head Self Tapper Screws 750 Piece Phillips Slotted Head Screws 600 Piece Nylon Self Lock Nuts 180 Piece Hexagon Nuts 650 Piece Hexagon Bolts 145 Piece Phillips Head Particle Board Screws 430 Piece Phillips Head Plasterboard Screws 545 Piece Hex Head Self Drilling Metal Screws 295 Piece Auto Blade Fuses 120 Piece Phillips Head Treated Pine Screws 300 Piece Phillips Head Chipboard Screws 360 Piece Hollow Wall Anchors 80 Piece Machine Screws & Hexagon Nuts 575 Piece Hexagon Socket Head Cap Screws 84 Piece Phillips Head Self Drilling Metal Screws 340 Piece U-Clip & Phillips Head Screws 190 Piece Clevis Pins 72 Piece R-Clips 132 Piece Hi-Tensile Bolt & Nuts 290 Piece Internal & External Circlips 290 Piece Grease Nipples 80 Piece Roll Pins 380 Piece Hexagon Flange Nuts 190 Piece Screwdriver Bits 80 Piece Wiring Grommets 149 Piece Blanking Grommets 133 Piece Insulated Electrical Crimp Terminals 200 Piece

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

description

JP102.634 JP102.645 JP102.656 JP102.667 JP102.678 JP102.689 JP102.701 JP102.712

255 Piece Cotter Pins 205 Piece Blind Rivets 310 Piece Flat Washers 248 Piece Mach Screws Hex Nuts 710 Piece Hex Socket Cap Screws 160 Piece Hexagon Bolt & Nuts 360 Piece Asst Phil Screws 360 Piece Asst Philips C/S Screws

TANK VALVE

JP32-30777

Tank Valve Short 1/8" BSP

HOSE CLAMPS

JP52.1901 JP52.1902 JP52.1903 JP52.1904 JP52.1905 JP52.1906 JP52.1907 JP52.1908 JP52.1909

Hose Clamp Solid Band 9 - 13mm Hose Clamp Solid Band 11 - 16mm Hose Clamp Solid Band 13 - 20mm Hose Clamp Solid Band 16 - 22mm Hose Clamp Solid Band 18 - 25mm Hose Clamp Solid Band 22 - 30mm Hose Clamp Solid Band 25 - 35mm Hose Clamp Solid Band 35 - 50mm Hose Clamp Solid Band 45 - 60mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

JAMEC PEM

Item No. STAINLESS STEEL SETS

MASTER & TRADE PACKS

MASTER & TRADE ASSORTMENT PACKS

kincrome

Professional Quality Toolbeen Range. ‘KINCROME Professional Tools®’ what is the pinnacle quality Diager products have manufactured in France forQuality over 55 years.stands Diageratdistinguishes itself of from its competitors toolmanship. The range includes tool kits and socketproduct sets andimprovement. accessories, spanners and spanner an sets, pliers andrange by its commitment to innovative design andsets, constant Diager manufacture extensive wrenches, and fastenings, scrape cutting and saw,tools tool boxes storage, automotive, of premiumscrewdrivers high end tungsten carbide,cut, masonry for theandConstruction Industry.Striking, Prying & Clamping,

KINCROME CONTENTS Lighting & Electrical.............................................. 124

Tool Kits & Sets........................................................80

Socketry, Socket Sets & Accessories......... 81 - 103

Measuring................................................................125

Spanners & Spanner Sets...........................103 - 106

Pliers & Wrenches........................................107 - 108

Construction............................................................127

Screwdrivers & Fastening..........................109 - 110

Workshop & Engineering...................................... 128

Cut / Scrape / Saw......................................... 111 - 112

Agriculture & Farming........................................... 129

Tool Boxes & Storage....................................113 - 118

Lubrication & Fluid Transfer.................................130

Automotive.................................................... 118 - 120

Striking / Prying..................................................... 123

Lifting & Materials Handling................................ 126

FINKAL

Striking / Prying............................................121 - 122

kincrome

Measuring, Drilling, Boring, lifting & welding. This commitment to excellence is why ‘KINCROME Professional Quality Tools®’ is the market leader in quality.

Tool Boxes & Storage............................................. 133

CHROMETECH

Tool Kit & Adjustable Wrench...............................................130

Automotive.............................................................. 133

SUPATOOL

Striking / Prying..................................................... 134

Tool Kits....................................................................131

Air Tools & Accessories...............................134 - 136

Socket Sets & Accessories...................................131

Workshop & Engineering......................................136

Spanner Sets.......................................................... 132

Pliers & Wrenches.................................................. 132

Screwdrivers & Fastening.................................... 133

Cut / Scrape / Saw.................................................. 133

Tool Kits, TOOL TRAYS & SETS

KINCROME

TOOL KITS, TOOL TRAYS & SETS

Item No.

DescriPtion

kincrome tool kits

KK1000 K21037 K21035

Dirt Bike Tool Kit 23 Piece - comes complete in hardwearing and portable Bum Bag (Black) Giant Tool Workshop 331 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest, KK7763 Blue Steel 3 Drawer Add On Tool Chest & KK7767 Blue Steel 7 Drawer Tool Trolley Giant Tool Workshop 398 Piece Imperial / Metric - includes KK7769 Blue Steel 9 Drawer Tool Chest, KK7763 Blue Steel 3 Drawer Add On Tool Chest & KK7767 Blue Steel 7 Drawer Tool Trolley

K21038

Pro User Tool Workshop 455 Piece Imperial / Metric - includes KK7760 Blue Steel 8 Drawer Tool Chest & KK7765 Blue Steel 9 Drawer Tool Trolley Tool Cabinet 204 Piece Imperial / Metric - includes K51015 Large Wall Cabinet Tool Cabinet 227 Piece Imperial / Metric - includes K51015 Large Wall Cabinet Tool Cabinet 295 Piece Imperial / Metric - includes K51065 Giant Wall Cabinet Tool Chest 158 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest Tool Chest 158 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest Tool Chest 187 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest Tool Chest 190 Piece Metric - includes KK7769 Blue Steel 9 Drawer Tool Chest Tool Chest 196 Piece Imperial / Metric - includes KK7769 Blue Steel 9 Drawer Tool Chest Tool Chest 203 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest Tool Chest 219 Piece Imperial / Metric - includes KK7057 7 Drawer Extra Deep Tool Chest Tool Chest 226 Piece Imperial / Metric - includes KK7755 Blue Steel 10 Drawer Extra Deep Tool Chest Tool Chest 227 Piece Imperial / Metric - includes KK7768 Blue Steel 8 Drawer Tool Chest Tool Kit 101 Piece Imperial / Metric - includes K51005 5 Tray Cantilever Tool Box Tool Kit 145 Piece Imperial / Metric - includes K51005 5 Tray Cantilever Tool Box Tool Kit 49 Piece Imperial / Metric LED 1/2" Drive comes complete in blow mould case Tool Kit 55 Piece Imperial / Metric LED 3/8" Drive comes complete in blow mould case Tool Kit 65 Piece Imperial / Metric - includes KK7095 Tool Box with Cantilever Tray Tool Workshop 158 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest & KK7764 Blue Steel 3 Drawer Tool Trolley

K21032

Tool Workshop 182 Piece Imperial / Metric - includes KK7766 Blue Steel 6 Drawer Tool Chest & KK7767 Blue Steel 7 Drawer Tool Trolley

KK1209

Tool Workshop 218 Piece Imperial / Metric - includes KK7755 Blue Steel 10 Drawer Extra Deep Tool Chest & KK7750 Blue Steel 9 Drawer Tool Trolley

K21041 K21081 K21083 K21084 K21094 K21026 K21028 KK1900 K21093 K21031 KK1213 KK1206 KK1231 K21055 K21059 KK2059 KK2058 KK1065

Tool Workshop 897 Piece Imperial / Metric - includes KK7770 Blue Steel 10 Drawer Tool Chest & KK7775 Blue Steel 10 Drawer Trolley KK1197 Utility Tool Kit 179 Piece Imperial / Metric - includes K51082 9 Drawer Agricultural Tool Chest - Friction Slide Note: Tools Only Kits available if required KK1818

tool trays, sets - EVA, Silverline & Plastic Item No.

DescriPtion

TOOL TRAY SETS - EVA

KEVA10T KEVA11T KEVA12T KEVA13T KEVA14T KEVA22T KEVA23T KEVA24T KEVA29T KEVA30T

3 Piece EVA Tray Plier Set 3 Piece EVA Tray Plier & Wrench Set 7 Piece EVA Tray Gear Spanner Set Metric 6 Piece EVA Tray Screwdriver Set 34 Piece EVA Tray Screwdrivers 20 Piece EVA Tray Spanners, Pliers & Wrenches 16 Piece EVA Tray Double Ring Spanners 17 Piece EVA Tray Double Open End Spanners 80 Piece EVA Tray Sockets & Accessories 24 Piece EVA Tray Spanners & Wrenches

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DescriPtion

KEVA31T 19 Piece EVA Tray Double Ring Spanners & Flare Nuts KEVA32T 85 Piece EVA Tray Socket & Accessories Suits Extra Deep KEVA33T 34 Piece EVA Tray Spanners & Flare Nuts Suits Extra Deep KEVA34T 26 Piece EVA Tray Open End & Double Ring Spanners Suits Extra Deep KEVA35T 84 Piece EVA Tray Socket & Accessoriesn Suits Extra Deep KEVA36T 24 Piece EVA Tray Combination Spanners KEVA39T 21 Piece EVA Tray Spanners & Flare Nuts Metric Only KEVA40T 17 Piece EVA Tray Double Ring & Open End Spanners Metric Only KEVA41T 72 Piece EVA Tray Sockets & Accessories Metric Only KEVA42T 15 Piece EVA Tray Gear Spanners Metric Only KEVA44T 52 Piece EVA Tray Sockets & Accessories KEVA45T 16 Piece EVA Tray Combination Spanners KEVA46T 10 Piece EVA Tray Pliers & Screwdrivers KFOAMTRAY15 30 Piece Silverline Tray Silverline Spanners KFOAMTRAY16 72 Piece Silverline Tray Screwdrivers & Fastening KFOAMTRAY17 4 Piece Silverline Tray Pliers, Cutting & Multi Grip KFOAMTRAY18 36 Piece Silverline Tray Hex & Torx® Key Sets KFOAMTRAY19 20 Piece Silverline Tray Gear Wrenches & Adjustable Wrenches KK5090 6 Piece Plastic Tool Tray TorqueMaster Screwdrivers KK5091 33 Piece Plastic Tool Tray TorqueMaster Screwdrivers Note: EVA Foam trays - Kincrome EVA Trays have been specifically designed to protect and maintain your Kincrome Professional Quality Tools®. These tool trays are custom made to suit Kincrome tool chests and boxes. Kincrome EVA trays make selection of your tools easier and quicker - saving you valuable time.

1/2” Drive Sockets & Accessories Item No.

DescriPtion

DEEP SOCKETS METRIC & IMPERIAL

KDS8MC KDS9MC KDS10MC KDS11MC KDS12MC KDS13MC KDS14MC KDS15MC KDS17MC KDS18MC KDS19MC KDS21MC KDS22MC KDS24MC KDS38C KDS716C KDS12C KDS916C KDS58C KDS1116C KDS34C

Deep Socket 1/2" Drive 8mm Deep Socket 1/2" Drive 9mm Deep Socket 1/2" Drive 10mm Deep Socket 1/2" Drive 11mm Deep Socket 1/2" Drive 12mm Deep Socket 1/2" Drive 13mm Deep Socket 1/2" Drive 14mm Deep Socket 1/2" Drive 15mm Deep Socket 1/2" Drive 17mm Deep Socket 1/2" Drive 18mm Deep Socket 1/2" Drive 19mm Deep Socket 1/2" Drive 21mm Deep Socket 1/2" Drive 22mm Deep Socket 1/2" Drive 24mm Deep Socket 1/2" Drive 3/8" Deep Socket 1/2" Drive 7/16" Deep Socket 1/2" Drive 1/2" Deep Socket 1/2" Drive 9/16" Deep Socket 1/2" Drive 5/8" Deep Socket 1/2" Drive 11/16" Deep Socket 1/2" Drive 3/4"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

TOOL TRAYS, SET & 1/2” DRIVE DEEP SOCKETS

Tool TRAY sets & 1/2” drive deep sockets

SocketS & Accessories 1/2â&#x20AC;? Drive Sockets & Accessories

Item No.

DescriPtion

KINCROME

SOCKETS & ACCESSORIES

HEX BIT SOCKETS METRIC & IMPERIAL

KHS5M KHS6M KHS8M KHS10M KHS11M KHS12M KHS14M KHS17M KHS6 KHS7 KHS8

Hex Bit Socket 1/2" Drive 5mm Hex Bit Socket 1/2" Drive 6mm Hex Bit Socket 1/2" Drive 8mm Hex Bit Socket 1/2" Drive 10mm Hex Bit Socket 1/2" Drive 11mm Hex Bit Socket 1/2" Drive 12mm Hex Bit Socket 1/2" Drive 14mm Hex Bit Socket 1/2" Drive 17mm Hex Bit Socket 1/2" Drive 3/16" Hex Bit Socket 1/2" Drive 7/32" Hex Bit Socket 1/2" Drive 1/4"

KHS10 KHS12 KHS14 KHS16 KHS18 KHS20 SPLINE SOCKETS METRIC

Hex Bit Socket Hex Bit Socket Hex Bit Socket Hex Bit Socket Hex Bit Socket Hex Bit Socket

KSS8M KSS10M KSS12M

Spline Socket 1/2" Drive 8mm Spline Socket 1/2" Drive 10mm Spline Socket 1/2" Drive 12mm

1/2" Drive 5/16" 1/2" Drive 3/8" 1/2" Drive 7/16" 1/2" Drive 1/2" 1/2" Drive 9/16" 1/2" Drive 5/8"

SPARK PLUG SOCKETS

KZDA26DC KZDA26EC

Spark Plug Socket 1/2" Drive 16mm (5/8") Spark Plug Socket 1/2" Drive 21mm (13/16")

STANDARD SOCKETS METRIC & IMPERIAL

KKC238C KKC239C KKC240C KKC241C KKC242C KKC243C KKC244C KKC245C KKC246C KKC247C KKC248C KKC249C KKC250C KKC251C KKC252C KKC253C KKC254C KKC255C KKC256C KKC257C KKC258C KDS78C

Standard Socket 1/2" Drive 8mm Standard Socket 1/2" Drive 9mm Standard Socket 1/2" Drive 10mm Standard Socket 1/2" Drive 11mm Standard Socket 1/2" Drive 12mm Standard Socket 1/2" Drive 13mm Standard Socket 1/2" Drive 14mm Standard Socket 1/2" Drive 15mm Standard Socket 1/2" Drive 16mm Standard Socket 1/2" Drive 17mm Standard Socket 1/2" Drive 18mm Standard Socket 1/2" Drive 19mm Standard Socket 1/2" Drive 20mm Standard Socket 1/2" Drive 21mm Standard Socket 1/2" Drive 22mm Standard Socket 1/2" Drive 23mm Standard Socket 1/2" Drive 24mm Standard Socket 1/2" Drive 25mm Standard Socket 1/2" Drive 26mm Standard Socket 1/2" Drive 27mm Standard Socket 1/2" Drive 28mm Deep Socket 1/2" Drive 7/8"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Sockets & Accessories

DescriPtion

KDS1516C KKC259C KKC260C KKC261C KKC262C KKC212C KKC213C KKC214C KKC215C KKC216C KKC217C KKC218C KKC219C KKC220C KKC221C KKC222C KKC223C KKC224C KKC225C KKC226C KKC227C KKC228C KKC229C KKC230C

Deep Socket 1/2" Drive 15/16" Standard Socket 1/2" Drive 29mm Standard Socket 1/2" Drive 30mm Standard Socket 1/2" Drive 31mm Standard Socket 1/2" Drive 32mm Standard Socket 1/2" Drive 3/8" Standard Socket 1/2" Drive 7/16" Standard Socket 1/2" Drive 1/2" Standard Socket 1/2" Drive 9/16" Standard Socket 1/2" Drive 19/32" Standard Socket 1/2" Drive 5/8" Standard Socket 1/2" Drive 21/32" Standard Socket 1/2" Drive 11/16" Standard Socket 1/2" Drive 3/4" Standard Socket 1/2" Drive 25/32" Standard Socket 1/2" Drive 13/16" Standard Socket 1/2" Drive 7/8" Standard Socket 1/2" Drive 15/16" Standard Socket 1/2" Drive 31/32" Standard Socket 1/2" Drive 1" Standard Socket 1/2" Drive 1-1/16" Standard Socket 1/2" Drive 1-1/8" Standard Socket 1/2" Drive 1-3/16" Standard Socket 1/2" Drive 1-1/4"

ACCESSORIES

KZDA23C KZDA25C KZDA210C KZDA215C KZDA220C KK020015 KK020016 KK020017 K02086C K02087C K02088C K02089C KZDA310C KZDA315C KZDA324C KZDA324RK KK2007 KZDA330C KH12C KH12RK KK020006 KK020006RK

Extension Bar 1/2" Drive 75mm (3") Extension Bar 1/2" Drive 125mm (5") Extension Bar 1/2" Drive 250mm (10") Extension Bar 1/2" Drive 375mm (15") Extension Bar 1/2" Drive 500mm (20") Extension Combination 1/2" Drive 75mm Extension Combination 1/2" Drive 125mm Extension Combination 1/2" Drive 250mm Extension Wobble Bar 1/2" Drive 50mm Extension Wobble Bar 1/2" Drive 125mm Extension Wobble Bar 1/2" Drive 250mm Extension Wobble Bar 1/2" Drive 500mm Flexible Handle 1/2" Drive 250mm (10") Flexible Handle 1/2" Drive 375mm (15") Flexible Handle 1/2" Drive 600mm (24") Repair Kit to Suit KZDA324C Flexible Telescopic Ratchet 1/2" Drive L-Handle 1/2" Drive 200mm Ratchet Handle 1/2" Drive Reversible Ratchet Repair Kit to Suit KH12C Ratchet Handle 1/2" Drive Reversible Series 2 Ratchet Repair Kit to Suit KK020006

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

1/2â&#x20AC;? Drive Sockets & Accessories

SocketS & Accessories 1/2” Drive & 1/4” Sockets & Accessories

Item No.

DescriPtion

KINCROME

SOCKETS & ACCESSORIES

ACCESSORIES

KZDA315RK K02040 K02040RK KZDA410C KZDA518C KZDA10C

Repair Kit to Suit KZDA315C Ratchet Stubby 1/2" Drive Ratchet Repair Kit to Suit K02040 Sliding T-Handle 1/2" Drive 250mm (10") Speed Brace 1/2" Drive 425mm (17") Universal Joint 1/2" Drive

1/4” Drive Sockets & Accessories Item No.

DescriPtion

DEEP SOCKETS METRIC & IMPERIAL

KKC501C KKC502C KKC503C KKC504C KKC505C KKC506C KKC507C KKC508C KKC509C KKC5095C KKC510C KKC511C KKC512C KKC513C KKC514C KKC515C KKC516C KKC517C

Deep Socket 1/4" Drive 4mm Deep Socket 1/4" Drive 5mm Deep Socket 1/4" Drive 6mm Deep Socket 1/4" Drive 7mm Deep Socket 1/4" Drive 8mm Deep Socket 1/4" Drive 9mm Deep Socket 1/4" Drive 10mm Deep Socket 1/4" Drive 11mm Deep Socket 1/4" Drive 12mm Deep Socket 1/4" Drive 13mm Deep Socket 1/4" Drive 3/16" Deep Socket 1/4" Drive 7/32" Deep Socket 1/4" Drive 1/4" Deep Socket 1/4" Drive 9/32" Deep Socket 1/4" Drive 5/16" Deep Socket 1/4" Drive 3/8" Deep Socket 1/4" Drive 7/16" Deep Socket 1/4" Drive 1/2"

STANDARD SOCKETS METRIC & IMPERIAL

KKC444C KKC445C KKC450C KKC451C KKC456C KKC457C KKC458C KKC459C KKC460C KKC461C KKC462C KKC463C KKC472C KKC473C KKC474C KKC475C

Standard Socket 1/4" Drive 4mm Standard Socket 1/4" Drive 4.5mm Standard Socket 1/4" Drive 5mm Standard Socket 1/4" Drive 5.5mm Standard Socket 1/4" Drive 6mm Standard Socket 1/4" Drive 7mm Standard Socket 1/4" Drive 8mm Standard Socket 1/4" Drive 9mm Standard Socket 1/4" Drive 10mm Standard Socket 1/4" Drive 11mm Standard Socket 1/4" Drive 12mm Standard Socket 1/4" Drive 13mm Standard Socket 1/4" Drive 3/16" Standard Socket 1/4" Drive 7/32" Standard Socket 1/4" Drive 1/4" Standard Socket 1/4" Drive 9/32"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KKC476C

Standard Socket 1/4" Drive 5/16"

KKC477C

Standard Socket 1/4" Drive 11/32"

KKC478C

Standard Socket 1/4" Drive 3/8"

KKC479C

Standard Socket 1/4" Drive 7/16"

KKC480C

Standard Socket 1/4" Drive 1/2"

ACCESSORIES

KKC406C KKC410C KKC414C KKC403C KK020009 KK020008 KKC402C KH14C KH14RK KK020004 KK020004RK K02015 K02015RK KKC405C KKC400C KZDA114C

Extension Bar 1/4" Drive 150Mm (6") Extension Bar 1/4" Drive 250Mm (10") Extension Bar 1/4" Drive 350Mm (14") Extension Bar 1/4" Drive 50Mm (2") Extension Combination 1/4" Drive 150Mm Extension Combination 1/4" Drive 50Mm Flexible Handle 1/4" Drive 150Mm (6") Ratchet Handle 1/4" Drive Reversible Ratchet Repair Kit Suits Kh14c Ratchet Handle 1/4" Drive Reversible Series 2 Ratchet Repair Kit To Suit Kk020004 Ratchet Stubby 1/4" Drive Ratchet Repair Kit To Suit K02015 Sliding T-Handle 1/4" Drive 115Mm Spinner Handle 1/4" Drive 150Mm (6") Universal Joint 1/4" Drive

3/4” Drive Sockets & Accessories Item No.

DescriPtion

STANDARD SOCKETS METRIC & IMPERIAL

KKC130C KKC131C KKC132C KKC133C KKC134C KKC135C KKC136C KKC137C KKC138C KKC139C KKC140C KKC141C KKC142C KKC112C KKC113C KKC114C KKC115C KKC116C

Socket Standard 3/4" Drive 22mm Socket Standard 3/4" Drive 24mm Socket Standard 3/4" Drive 26mm Socket Standard 3/4" Drive 27mm Socket Standard 3/4" Drive 29mm Socket Standard 3/4" Drive 30mm Socket Standard 3/4" Drive 32mm Socket Standard 3/4" Drive 35mm Socket Standard 3/4" Drive 36mm Socket Standard 3/4" Drive 38mm Socket Standard 3/4" Drive 41mm Socket Standard 3/4" Drive 46mm Socket Standard 3/4" Drive 50mm Socket Standard 3/4" Drive 7/8" Socket Standard 3/4" Drive 15/16" Socket Standard 3/4" Drive 1" Socket Standard 3/4" Drive 1-1/16" Socket Standard 3/4" Drive 1-1/8"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

1/4” Drive & 3/4” DRIVE Sockets & Accessories

SocketS & Accessories

3/4” Drive & 3/8” DRIVE Sockets & Accessories

Item No.

DescriPtion

KINCROME

SOCKETS & ACCESSORIES

STANDARD SOCKETS METRIC & IMPERIAL

KKC117C KKC118C KKC119C KKC120C KKC121C KKC122C KKC124C KKC126C KKC127C KKC128C KKC129C

Socket Standard 3/4" Drive 1-3/16" Socket Standard 3/4" Drive 1-1/4" Socket Standard 3/4" Drive 1-5/16" Socket Standard 3/4" Drive 1-3/8" Socket Standard 3/4" Drive 1-7/16" Socket Standard 3/4" Drive 1-1/2" Socket Standard 3/4" Drive 1-5/8" Socket Standard 3/4" Drive 1-3/4" Socket Standard 3/4" Drive 1-13/16" Socket Standard 3/4" Drive 1-7/8" Socket Standard 3/4" Drive 2"

ACCESSORIES KKC104C KKC102C KKC106C KKC100C KH35C KH35RK KKC099C KKC105C KK2006 KK2006RK KKC101C

Extension Bar 3/4" Drive 100mm Extension Bar 3/4" Drive 200mm Extension Bar 3/4" Drive 400mm Flexible Handle 3/4" Drive 475mm Flexible Telescopic Ratchet 3/4" Drive Ratchet Repair Kit to Suit KH35C L-Handle 3/4" Drive 450mm Sliding T-Handle 3/4" Drive 475mm Telescopic Ratchet 3/4" Drive Ratchet Repair Kit to Suit KK2006 Universal Joint 3/4" Drive

3/8” Drive Sockets & Accessories Item No.

DescriPtion

DEEP SOCKETS METRIC & IMPERIAL KKC341C KKC342C KKC343C KKC344C KKC345C KKC346C KKC347C KKC348C KKC349C KKC350C KKC351C KKC352C KKC353C KKC354C KKC355C KKC356C KKC357C KKC358C

Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket Deep Socket

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories 3/8â&#x20AC;? Drive Sockets & Accessories

KKC308C KKC309C KKC310C KKC311C KKC312C KKC313C KKC314C KKC315C KKC316C KKC317C KKC318C KKC319C KKC320C KKC321C KKC322C KKC332C KKC333C KKC334C KKC335C KKC337C KKC339C KKC340C KKC361C KKC362C KKC363C KKC364C

DescriPtion Deep Socket 3/8" Drive 3/4" Deep Socket 3/8" Drive 13/16" Spark Plug Socket 3/8" Drive 13/16" Spark Plug Socket 3/8" Drive 5/8" Standard Socket 3/8" Drive 5mm Standard Socket 3/8" Drive 6mm Standard Socket 3/8" Drive 7mm

Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket Standard Socket

3/8" Drive 8mm 3/8" Drive 9mm 3/8" Drive 10mm 3/8" Drive 11mm 3/8" Drive 12mm 3/8" Drive 13mm 3/8" Drive 14mm 3/8" Drive 15mm 3/8" Drive 16mm 3/8" Drive 17mm 3/8" Drive 18mm 3/8" Drive 19mm 3/8" Drive 20mm 3/8" Drive 21mm 3/8" Drive 22mm 3/8" Drive 3/8" 3/8" Drive 7/16" 3/8" Drive 1/2" 3/8" Drive 9/16" 3/8" Drive 5/8" 3/8" Drive 11/16" 3/8" Drive 3/4" 3/8" Drive 13/16" 3/8" Drive 7/8" 3/8" Drive 15/16" 3/8" Drive 1"

ACCESSORIES

KKC323C KKC326C KKC327C KKC328C KK020012 KK020013 KK020014 K02081C K02082C K02083C

Extension Bar 3/8" Drive 75mm (3") Extension Bar 3/8" Drive 150mm (6") Extension Bar 3/8" Drive 250mm (10") Extension Bar 3/8" Drive 450mm (18") Extension Combination 3/8" Drive 75mm Extension Combination 3/8" Drive 150mm Extension Combination 3/8" Drive 250mm Extension Wobble Bar 3/8" Drive 45mm Extension Wobble Bar 3/8" Drive 75mm Extension Wobble Bar 3/8" Drive 150mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SOCKETS & ACCESSORIES

DEEP SOCKETS METRIC & IMPERIAL KKC359C KKC360C SPARK PLUG SOCKETS KZDA26BC KZDA26CC STANDARD SOCKETS METRIC & IMPERIAL KKC303C KKC306C KKC307C

KINCROME

Item No.

SocketS & Accessories 3/8” Drive Socket Accessories, adaptors, led adaptors, led extension bars & impact sockets

Item No.

DescriPtion

KINCROME

SOCKETS & ACCESSORIES

ACCESSORIES

K02084C K02085C KKC302C KP2010 KKC304C KH38C KH38RK KK020005 KK020005RK K02039 K02039RK KKC305C KZBA114C

Extension Wobble Bar 3/8" Drive 250mm Extension Wobble Bar 3/8" Drive 450mm Flexible Handle 3/8" Drive 200mm Flexible Telescopic Ratchet 3/8" Drive Oil Pressure Switch 3/8" Drive Ratchet Handle 3/8" Drive Ratchet Repair Kit to Suit KH38C Ratchet Handle 3/8" Drive Series 2 Ratchet Repair Kit Suits K020005 Ratchet Stubby 3/8" Drive Ratchet Repair Kit to Suit K02039 Sliding T-Handle 3/8" Drive 200mm Universal Joint 3/8" Drive

Adaptors, LED Adaptors & LED Extension Bars Item No.

DescriPtion

KKC3412C KKC1438C KKC1234C KKC3812C KKC1238C KK2130 KK2131 KK2132

Adaptor 1/2" Male x 3/4" Female Adaptor 1/4" Male x 3/8" Female Adaptor 3/4" Male x 1/2" Female Adaptor 3/8" Female x 1/2" Male Adaptor 3/8" Male x 1/2" Female LED Adaptor 3/8" Female x 1/2" Male LED Extension Bar 1/2" Drive 60mm LED Extension Bar 3/8" Drive 60mm LED Extension Bar Set 3 Piece 60mm includes KK2130, KK2131, KK2132

KK2133

Impact Sockets, 3/8” drive metric & imperial Item No.

DescriPtion

KK2205 KK2206 KK2207 KK2208 KK2209 KK2210 KK2211 KK2212 KK2213 KK2214 KK2215 KK2216 KK2217

Impact Socket 3/8" Drive 6mm Impact Socket 3/8" Drive 7mm Impact Socket 3/8" Drive 8mm Impact Socket 3/8" Drive 9mm Impact Socket 3/8" Drive 10mm Impact Socket 3/8" Drive 11mm Impact Socket 3/8" Drive 12mm Impact Socket 3/8" Drive 13mm Impact Socket 3/8" Drive 14mm Impact Socket 3/8" Drive 15mm Impact Socket 3/8" Drive 16mm Impact Socket 3/8" Drive 17mm Impact Socket 3/8" Drive 18mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KK2218 KK2219 KK2220 KK2221 KK2222 KK2223 KK2224 KK2225 KK2226 KK2227 KK2228 KK2229 KK2230 KK2231

Impact Socket 3/8" Drive 19mm Impact Socket 3/8" Drive 20mm Impact Socket 3/8" Drive 21mm Impact Socket 3/8" Drive 22mm Impact Socket 3/8" Drive 5/16" Impact Socket 3/8" Drive 3/8" Impact Socket 3/8" Drive 7/16" Impact Socket 3/8" Drive 1/2" Impact Socket 3/8" Drive 9/16" Impact Socket 3/8" Drive 5/8" Impact Socket 3/8" Drive 11/16" Impact Socket 3/8" Drive 3/4" Impact Socket 3/8" Drive 13/16" Impact Socket 3/8" Drive 7/8"

IMPACT SOCKETS DEEP 3/8" DRIVE METRIC & IMPERIAL

KK2232 KK2233 KK2234 KK2235 KK2236 KK2237 KK2238 KK2239 KK2240 KK2241 KK2242 KK2243 KK2244 KK2245 KK2246 KK2247 KK2248 KK2249 KK2250 KK2251 KK2252 KK2253 KK2254 KK2255 KK2256 KK2257 KK2258

Impact Socket Deep 3/8" Drive 6mm Impact Socket Deep 3/8" Drive 7mm Impact Socket Deep 3/8" Drive 8mm Impact Socket Deep 3/8" Drive 9mm Impact Socket Deep 3/8" Drive 10mm Impact Socket Deep 3/8" Drive 11mm Impact Socket Deep 3/8" Drive 12mm Impact Socket Deep 3/8" Drive 13mm Impact Socket Deep 3/8" Drive 14mm Impact Socket Deep 3/8" Drive 15mm Impact Socket Deep 3/8" Drive 16mm Impact Socket Deep 3/8" Drive 17mm Impact Socket Deep 3/8" Drive 18mm Impact Socket Deep 3/8" Drive 19mm Impact Socket Deep 3/8" Drive 20mm Impact Socket Deep 3/8" Drive 21mm Impact Socket Deep 3/8" Drive 22mm Impact Socket Deep 3/8" Drive 5/16" Impact Socket Deep 3/8" Drive 3/8" Impact Socket Deep 3/8" Drive 7/16" Impact Socket Deep 3/8" Drive 1/2" Impact Socket Deep 3/8" Drive 9/16" Impact Socket Deep 3/8" Drive 5/8" Impact Socket Deep 3/8" Drive 11/16" Impact Socket Deep 3/8" Drive 3/4" Impact Socket Deep 3/8" Drive 13/16" Impact Socket Deep 3/8" Drive 7/8"

HEX IMPACT SOCKETS 3/8" DRIVE METRIC & IMPERIAL

KK2259 KK2260 KK2261 KK2262

Hex Impact 3/8" Drive 3mm x 60mm Hex Impact 3/8" Drive 4mm x 60mm Hex Impact 3/8" Drive 5mm x 60mm Hex Impact 3/8" Drive 6mm x 60mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

IMPACT Sockets

SocketS & Accessories

KINCROME

SOCKETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KK2263 KK2264 KK2265 KK2266 KK2267 KK2268 KK2269 KK2270 KK2271 KK2272 KK2273 KK2274 KK2275 KK2276 KK2277

Hex Impact 3/8" Drive 7mm x 60mm Hex Impact 3/8" Drive 8mm x 60mm Hex Impact 3/8" Drive 10mm x 60mm Hex Impact 3/8" Drive 12mm x 60mm Hex Impact 3/8" Drive 14mm x 60mm Hex Impact 3/8" Drive 16mm x 60mm Hex Impact 3/8" Drive 1/4" x 60mm Hex Impact 3/8" Drive 5/16" x 60mm Hex Impact 3/8" Drive 3/8" x 60mm Hex Impact 3/8" Drive 7/16" x 60mm Hex Impact 3/8" Drive 1/2" x 60mm Hex Impact 3/8" Drive 9/16" x 60mm Hex Impact 3/8" Drive 5/8" x 60mm Hex Impact 3/8" Drive 11/16" x 60mm Hex Impact 3/8" Drive 3/4" x 60mm

IMPACT SOCKETS 1/2" DRIVE METRIC & IMPERIAL - manufactured from chrome vanadium steel (V-R)

KIS10MC KIS11MC KIS12MC KIS13MC KIS15MC KIS16MC KIS17MC KIS19MC KIS21MC KIS22MC KIS24MC KIS38C KIS716C KIS12C KIS58C KIS1116C KIS34C KIS1316C KIS78C KIS1516C KISNCHC

Impact Socket 1/2" Drive 10mm Impact Socket 1/2" Drive 11mm Impact Socket 1/2" Drive 12mm Impact Socket 1/2" Drive 13mm Impact Socket 1/2" Drive 15mm Impact Socket 1/2" Drive 16mm Impact Socket 1/2" Drive 17mm Impact Socket 1/2" Drive 19mm Impact Socket 1/2" Drive 21mm Impact Socket 1/2" Drive 22mm Impact Socket 1/2" Drive 24mm Impact Socket 1/2" Drive 3/8" Impact Socket 1/2" Drive 7/16" Impact Socket 1/2" Drive 1/2" Impact Socket 1/2" Drive 5/8" Impact Socket 1/2" Drive 11/16" Impact Socket 1/2" Drive 3/4" Impact Socket 1/2" Drive 13/16" Impact Socket 1/2" Drive 7/8" Impact Socket 1/2" Drive 15/16" Impact Socket 1/2" Drive 1"

IMPACT SOCKETS 1/2" DRIVE METRIC & IMPERIAL - manufactured from chrome molybdenum (R-MO)

KK2286 KK2287 KK2288 KK2289 KK2290 KK2291 KK2292 KK2293 KK2294 KK2295

Impact Socket 1/2" Drive 8mm Impact Socket 1/2" Drive 9mm Impact Socket 1/2" Drive 10mm Impact Socket 1/2" Drive 11mm Impact Socket 1/2" Drive 12mm Impact Socket 1/2" Drive 13mm Impact Socket 1/2" Drive 14mm Impact Socket 1/2" Drive 15mm Impact Socket 1/2" Drive 16mm Impact Socket 1/2" Drive 17mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KK2296 KK2297 KK2298 KK2299 KK2300 KK2301 KK2302 KK2303 KK2304 KK2305 KK2306 KK2307 KK2308 KK2309 KK2310 KK2311 KK2312 KK2313 KK2314 KK2315 KK2316 KK2317 KK2318 KK2319 KK2320 KK2321 KK2322 KK2323 KK2324 KK2325 KK2326

Impact Socket 1/2" Drive 18mm Impact Socket 1/2" Drive 19mm Impact Socket 1/2" Drive 20mm Impact Socket 1/2" Drive 21mm Impact Socket 1/2" Drive 22mm Impact Socket 1/2" Drive 23mm Impact Socket 1/2" Drive 24mm Impact Socket 1/2" Drive 25mm Impact Socket 1/2" Drive 26mm Impact Socket 1/2" Drive 27mm Impact Socket 1/2" Drive 28mm Impact Socket 1/2" Drive 29mm Impact Socket 1/2" Drive 30mm Impact Socket 1/2" Drive 31mm Impact Socket 1/2" Drive 32mm Impact Socket 1/2" Drive 5/16" Impact Socket 1/2" Drive 3/8" Impact Socket 1/2" Drive 7/16" Impact Socket 1/2" Drive 1/2" Impact Socket 1/2" Drive 9/16" Impact Socket 1/2" Drive 5/8" Impact Socket 1/2" Drive 11/16" Impact Socket 1/2" Drive 3/4" Impact Socket 1/2" Drive 13/16" Impact Socket 1/2" Drive 7/8" Impact Socket 1/2" Drive 15/16" Impact Socket 1/2" Drive 1" Impact Socket 1/2" Drive 1-1/16" Impact Socket 1/2" Drive 1-1/8" Impact Socket 1/2" Drive 1-3/16" Impact Socket 1/2" Drive 1-1/4"

IMPACT SOCKET DEEP 1/2" DRIVE METRIC & IMPERIAL - manufactured from chrome vanadium steel (R-V)

KDIS10MC KDIS11MC KDIS12MC KDIS13MC KDIS14MC KDIS15MC KDIS17MC KDIS19MC KDIS21MC KDIS22MC KDIS27MC KDIS38C KDIS716C KDIS12C KDIS916C KDIS58C

Impact Socket Deep 1/2" Drive 10mm Impact Socket Deep 1/2" Drive 11mm Impact Socket Deep 1/2" Drive 12mm Impact Socket Deep 1/2" Drive 13mm Impact Socket Deep 1/2" Drive 14mm Impact Socket Deep 1/2" Drive 15mm Impact Socket Deep 1/2" Drive 17mm Impact Socket Deep 1/2" Drive 19mm Impact Socket Deep 1/2" Drive 21mm Impact Socket Deep 1/2" Drive 22mm Impact Socket Deep 1/2" Drive 27mm Impact Socket Deep 1/2" Drive 3/8" Impact Socket Deep 1/2" Drive 7/16" Impact Socket Deep 1/2" Drive 1/2" Impact Socket Deep 1/2" Drive 9/16" Impact Socket Deep 1/2" Drive 5/8"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

IMPACT Sockets & Accessories

SocketS & Accessories

KINCROME

SOCKETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KDIS1116C KDIS34C KDIS1316C KDIS78C KDIS1516C KDISNCHC KDIS1611C

Impact Socket Deep 1/2" Drive 11/16" Impact Socket Deep 1/2" Drive 3/4" Impact Socket Deep 1/2" Drive 13/16" Impact Socket Deep 1/2" Drive 7/8" Impact Socket Deep 1/2" Drive 15/16" Impact Socket Deep 1/2" Drive 1" Impact Socket Deep 1/2" Drive 1-1/16"

IMPACT SOCKETS DEEP 1/2" DRIVE METRIC & IMPERIAL - manufactured from chrome molybdenum (R-MO)

KK2327 KK2328 KK2329 KK2330 KK2331 KK2332 KK2333 KK2334 KK2335 KK2336 KK2337 KK2338 KK2339 KK2340 KK2341 KK2342 KK2343 KK2344 KK2345 KK2346 KK2347 KK2348 KK2349 KK2350 KK2351 KK2352 KK2353 KK2354 KK2355 KK2356 KK2357 KK2358 KK2359 KK2360 KK2361 KK2362 KK2363 KK2364 KK2365

Impact Socket Deep 1/2" Drive 8mm Impact Socket Deep 1/2" Drive 9mm Impact Socket Deep 1/2" Drive 10mm Impact Socket Deep 1/2" Drive 11mm Impact Socket Deep 1/2" Drive 12mm Impact Socket Deep 1/2" Drive 13mm Impact Socket Deep 1/2" Drive 14mm Impact Socket Deep 1/2" Drive 15mm Impact Socket Deep 1/2" Drive 16mm Impact Socket Deep 1/2" Drive 17mm Impact Socket Deep 1/2" Drive 18mm Impact Socket Deep 1/2" Drive 19mm Impact Socket Deep 1/2" Drive 20mm Impact Socket Deep 1/2" Drive 21mm Impact Socket Deep 1/2" Drive 22mm Impact Socket Deep 1/2" Drive 23mm Impact Socket Deep 1/2" Drive 24mm Impact Socket Deep 1/2" Drive 25mm Impact Socket Deep 1/2" Drive 26mm Impact Socket Deep 1/2" Drive 27mm Impact Socket Deep 1/2" Drive 28mm Impact Socket Deep 1/2" Drive 29mm Impact Socket Deep 1/2" Drive 30mm Impact Socket Deep 1/2" Drive 31mm Impact Socket Deep 1/2" Drive 32mm Impact Socket Deep 1/2" Drive 33mm Impact Socket Deep 1/2" Drive 36mm Impact Socket Deep 1/2" Drive 5/16" Impact Socket Deep 1/2" Drive 3/8" Impact Socket Deep 1/2" Drive 7/16" Impact Socket Deep 1/2" Drive 1/2" Impact Socket Deep 1/2" Drive 9/16" Impact Socket Deep 1/2" Drive 5/8" Impact Socket Deep 1/2" Dive 11/16" Impact Socket Deep 1/2" Drive 3/4" Impact Socket Deep 1/2" Drive 13/16" Impact Socket Deep 1/2" Drive 7/8" Impact Socket Deep 1/2" Drive 15/16" Impact Socket Deep 1/2" Drive 1"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KK2366 KK2367 KK2368 KK2369

Impact Socket Deep 1/2" Drive 1-1/16" Impact Socket Deep 1/2" Drive 1-1/8" Impact Socket Deep 1/2" Drive 1-3/16" Impact Socket Deep 1/2" Drive 1-1/4"

HEX IMPACT SOCKETS 1/2" DRIVE METRIC & IMPERIAL

KK2370 KK2371 KK2372 KK2373 KK2374 KK2375 KK2376 KK2377 KK2378 KK2379 KK2380 KK2381 KK2382 KK2383 KK2384 KK2385 KK2386 KK2387 KK2388 KK2389 KK2390 KK2391 KK2392 KK2393 KK2394 KK2395 KK2396 KK2397 KK2398 KK2399 KK2400

Hex Impact 1/2" Drive 4mm x 60mm Hex Impact 1/2" Drive 5mm x 60mm Hex Impact 1/2" Drive 6mm x 60mm Hex Impact 1/2" Drive 7mm x 60mm Hex Impact 1/2" Drive 8mm x 60mm Hex Impact 1/2" Drive 9mm x 60mm Hex Impact 1/2" Drive 10mm x 60mm Hex Impact 1/2" Drive 11mm x 60mm Hex Impact 1/2" Drive 12mm x 60mm Hex Impact 1/2" Drive 13mm x 60mm Hex Impact 1/2" Drive 14mm x 60mm Hex Impact 1/2" Drive 15mm x 78mm Hex Impact 1/2" Drive 17mm x 78mm Hex Impact 1/2" Drive 19mm x 78mm Hex Impact 1/2" Drive 16mm x 78mm Hex Impact 1/2" Drive 18mm x 78mm Hex Impact 1/2" Drive 20mm x 78mm Hex Impact 1/2" Drive 21mm x 78mm Hex Impact 1/2" Drive 5/32" x 60mm Hex Impact 1/2" Drive 3/16" x 60mm Hex Impact 1/2" Drive 7/32" x 60mm Hex Impact 1/2" Drive 1/4" x 60mm Hex Impact 1/2" Drive 5/16" x 60mm Hex Impact 1/2" Drive 3/8" x 60mm Hex Impact 1/2" Drive 7/16" x 60mm Hex Impact 1/2" Dive 1/2" x 60mm Hex Impact 1/2" Drive 9/16" x 75mm Hex Impact 1/2" Drive 5/8" x 75mm Hex Impact 1/2" Drive 3/4" x 75mm Hex Impact 1/2" Drive 11/16" x 75mm Hex Impact 1/2" Drive 13/16" x 75mm

IMPACT SOCKETS 3/4" DRIVE METRIC & IMPERIAL

KK2401 KK2402 KK2403 KK2404 KK2405 KK2406 KK2407 KK2408 KK2409 KK2410

Impact Socket 3/4" Drive 17mm Impact Socket 3/4" Drive 18mm Impact Socket 3/4" Drive 19mm Impact Socket 3/4" Drive 20mm Impact Socket 3/4" Drive 21mm Impact Socket 3/4" Drive 22mm Impact Socket 3/4" Drive 23mm Impact Socket 3/4" Drive 24mm Impact Socket 3/4" Drive 25mm Impact Socket 3/4" Drive 26mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

IMPACT Sockets

SocketS & Accessories

KINCROME

SOCKETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KK2411 KK2412 KK2413 KK2414 KK2415 KK2416 KK2417 KK2418 KK2419 KK2420 KK2421 KK2422 KK2423 KK2424 KK2425 KK2426 KK2427 KK2428 KK2429 KK2430 KK2431 KK2432 KK2433 KK2434 KK2435 KK2436 KK2437 KK2438 KK2439 KK2440 KK2441 KK2442 KK2443 KK2444 KK2445 KK2446 KK2447 KK2448 KK2449 KK2450 KK2451 KK2452 KK2453 KK2454 KK2455 KK2456 KK2457 KK2458 KK2459

Impact Socket 3/4" Drive 27mm Impact Socket 3/4" Drive 28mm Impact Socket 3/4" Drive 29mm Impact Socket 3/4" Drive 30mm Impact Socket 3/4" Drive 31mm Impact Socket 3/4" Drive 32mm Impact Socket 3/4" Drive 33mm Impact Socket 3/4" Drive 34mm Impact Socket 3/4" Drive 35mm Impact Socket 3/4" Drive 36mm Impact Socket 3/4" Drive 37mm Impact Socket 3/4" Drive 38mm Impact Socket 3/4" Drive 39mm Impact Socket 3/4" Drive 40mm Impact Socket 3/4" Drive 41mm Impact Socket 3/4" Drive 42mm Impact Socket 3/4" Drive 43mm Impact Socket 3/4" Drive 44mm Impact Socket 3/4" Drive 45mm Impact Socket 3/4" Drive 46mm Impact Socket 3/4" Drive 47mm Impact Socket 3/4" Drive 48mm Impact Socket 3/4" Drive 49mm Impact Socket 3/4" Drive 50mm Impact Socket 3/4" Drive 51mm Impact Socket 3/4" Drive 52mm Impact Socket 3/4" Drive 53mm Impact Socket 3/4" Drive 54mm Impact Socket 3/4" Drive 55mm Impact Socket 3/4" Drive 56mm Impact Socket 3/4" Drive 57mm Impact Socket 3/4" Drive 58mm Impact Socket 3/4" Drive 59mm Impact Socket 3/4" Drive 60mm Impact Socket 3/4" Drive 63mm Impact Socket 3/4" Drive 65mm Impact Socket 3/4" Drive 67mm Impact Socket 3/4" Drive 70mm Impact Socket 3/4" Drive 11/16" Impact Socket 3/4" Drive 3/4" Impact Socket 3/4" Drive 13/16" Impact Socket 3/4" Drive 7/8" Impact Socket 3/4" Drive 15/16" Impact Socket 3/4" Drive 1" Impact Socket 3/4" Drive 1-1/16" Impact Socket 3/4" Drive 1-1/8" Impact Socket 3/4" Drive 1-3/16" Impact Socket 3/4" Drive 1-1/4" Impact Socket 3/4" Drive 1-5/16"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KK2460 KK2461 KK2462 KK2463 KK2464 KK2465 KK2466 KK2467 KK2468 KK2469 KK2470 KK2471 KK2472 KK2473 KK2474 KK2475 KK2476 KK2477 KK2478 KK2479 KK2480

Impact Socket 3/4" Drive 1-3/8" Impact Socket 3/4" Drive 1-7/16" Impact Socket 3/4" Drive 1-1/2" Impact Socket 3/4" Drive 1-9/16" Impact Socket 3/4" Drive 1-5/8" Impact Socket 3/4" Drive 1-11/16" Impact Socket 3/4" Drive 1-3/4" Impact Socket 3/4" Drive 1-13/16" Impact Socket 3/4" Drive 1-7/8" Impact Socket 3/4" Drive 1-15/16" Impact Socket 3/4" Drive 2" Impact Socket 3/4" Drive 2-1/16" Impact Socket 3/4" Drive 2-1/8" Impact Socket 3/4" Drive 2-3/16" Impact Socket 3/4" Drive 2-1/4" Impact Socket 3/4" Drive 2-5/16" Impact Socket 3/4" Drive 2-3/8" Impact Socket 3/4" Drive 2-1/2" Impact Socket 3/4" Drive 2-9/16" Impact Socket 3/4" Drive 2-5/8" Impact Socket 3/4" Drive 2-3/4"

IMPACT SOCKETS DEEP 3/4" DRIVE METRIC & IMPERIAL

KK2481 KK2482 KK2483 KK2484 KK2485 KK2486 KK2487 KK2488 KK2489 KK2490 KK2491 KK2492 KK2493 KK2494 KK2495 KK2496 KK2497 KK2498 KK2499 KK2500 KK2501 KK2502 KK2503 KK2504 KK2505 KK2506

Impact Socket Deep 3/4" Drive 17mm Impact Socket Deep 3/4" Drive 18mm Impact Socket Deep 3/4" Drive 19mm Impact Socket Deep 3/4" Drive 20mm Impact Socket Deep 3/4" Drive 21mm Impact Socket Deep 3/4" Drive 22mm Impact Socket Deep 3/4" Drive 23mm Impact Socket Deep 3/4" Drive 24mm Impact Socket Deep 3/4" Drive 25mm Impact Socket Deep 3/4" Drive 26mm Impact Socket Deep 3/4" Drive 27mm Impact Socket Deep 3/4" Drive 28mm Impact Socket Deep 3/4" Drive 29mm Impact Socket Deep 3/4" Drive 30mm Impact Socket Deep 3/4" Drive 31mm Impact Socket Deep 3/4" Drive 32mm Impact Socket Deep 3/4" Drive 33mm Impact Socket Deep 3/4" Drive 34mm Impact Socket Deep 3/4" Drive 35mm Impact Socket Deep 3/4" Drive 36mm Impact Socket Deep 3/4" Drive 37mm Impact Socket Deep 3/4" Drive 38mm Impact Socket Deep 3/4" Drive 40mm Impact Socket Deep 3/4" Drive 41mm Impact Socket Deep 3/4" Drive 42mm Impact Socket Deep 3/4" Drive 43mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

IMPACT Sockets

Socket Sets & Accessories

KINCROME

SOCKET SETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KK2507 KK2508 KK2509 KK2510 KK2511 KK2512 KK2513 KK2514 KK2515 KK2516 KK2517 KK2518 KK2519 KK2520 KK2521 KK2522 KK2523 KK2524 KK2525 KK2526 KK2527 KK2528 KK2529 KK2530 KK2531

Impact Socket Deep 3/4" Drive 46mm Impact Socket Deep 3/4" Drive 49mm Impact Socket Deep 3/4" Drive 50mm Impact Socket Deep 3/4" Drive 11/16" Impact Socket Deep 3/4" Drive 3/4" Impact Socket Deep 3/4" Drive 13/16" Impact Socket Deep 3/4" Drive 7/8" Impact Socket Deep 3/4" Drive 15/16" Impact Socket Deep 3/4" Drive 1" Impact Socket Deep 3/4" Drive 1-1/16 Impact Socket Deep 3/4" Drive 1-1/8" Impact Socket Deep 3/4" Drive 1-3/16 Impact Socket Deep 3/4" Drive 1-1/4 Impact Socket Deep 3/4" Drive 1-5/16 Impact Socket Deep 3/4" Drive 1-3/8" Impact Socket Deep 3/4" Drive 1-7/16 Impact Socket Deep 3/4" Drive 1-1/2" Impact Socket Deep 3/4" Drive 1-9/16 Impact Socket Deep 3/4" Drive 1-5/8 Impact Socket Deep 3/4" Drive 1-11/16" Impact Socket Deep 3/4" Drive 1-3/4" Impact Socket Deep 3/4" Drive 1-13/16" Impact Socket Deep 3/4" Drive 1-7/8" Impact Socket Deep 3/4" Drive 1-15/16" Impact Socket Deep 3/4" Drive 2"

HEX IMPACT SOCKETS 3/4" DRIVE METRIC & IMPERIAL

KK2539 KK2540 KK2541 KK2542 KK2543 KK2544 KK2545 KK2546 KK2547 KK2548 KK2549 KK2550 KK2551 KK2552 KK2553 KK2554 KK2555 KK2556 KK2557 KK2558 KK2559 KK2560 KK2561

Hex Impact 3/4" Drive 14mm x 100mm Hex Impact 3/4" Drive 17mm x 100mm Hex Impact 3/4" Drive 19mm x 100mm Hex Impact 3/4" Drive 21mm x 100mm Hex Impact 3/4" Drive 22mm x 100mm Hex Impact 3/4" Drive 23mm x 100mm Hex Impact 3/4" Drive 24mm x 100mm Hex Impact 3/4" Drive 27mm x 100mm Hex Impact 3/4" Drive 30mm x 100mm Hex Impact 3/4" Drive 32mm x 100mm Hex Impact 3/4" Drive 36mm x 100mm Hex Impact 3/4" Drive 9/16" x 100mm Hex Impact 3/4" Drive 5/8" x 100mm Hex Impact 3/4" Drive 11/16" x 100mm Hex Impact 3/4" Drive 3/4" x 100mm Hex Impact 3/4" Drive 13/16" x 100mm Hex Impact 3/4" Drive 7/8" x 100mm Hex Impact 3/4" Drive 15/16" x 100mm Hex Impact 3/4" Drive 1" x 100mm Hex Impact 3/4" Drivee 1-1/16" x 100mm Hex Impact 3/4" Drive 1-1/8" x 100mm Hex Impact 3/4" Drive 1-3/16" x 100mm Hex Impact 3/4" Drive 1-1/4" x 100mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Socket Sets & Accessories IMPACT Sockets

Item No.

DescriPtion

Impact Socket 1" Drive 17mm Impact Socket 1" Drive 19mm Impact Socket 1" Drive 21mm Impact Socket 1" Drive 22mm Impact Socket 1" Drive 23mm Impact Socket 1" Drive 24mm Impact Socket 1" Drive 25mm Impact Socket 1" Drive 26mm Impact Socket 1" Drive 27mm Impact Socket 1" Drive 28mm Impact Socket 1" Drive 29mm Impact Socket 1" Drive 30mm Impact Socket 1" Drive 31mm Impact Socket 1" Drive 32mm Impact Socket 1" Drive 33mm Impact Socket 1" Drive 34mm Impact Socket 1" Drive 35mm Impact Socket 1" Drive 36mm Impact Socket 1" Drive 37mm Impact Socket 1" Drive 38mm Impact Socket 1" Drive 39mm Impact Socket 1" Drive 40mm Impact Socket 1" Drive 41mm Impact Socket 1" Drive 42mm Impact Socket 1" Drive 43mm Impact Socket 1" Drive 44mm Impact Socket 1" Drive 46mm Impact Socket 1" Drive 47mm Impact Socket 1" Drive 48mm Impact Socket 1" Drive 49mm Impact Socket 1" Drive 50mm Impact Socket 1" Drive 51mm Impact Socket 1" Drive 52mm Impact Socket 1" Drive 53mm Impact Socket 1" Drive 54mm Impact Socket 1" Drive 55mm Impact Socket 1" Drive 56mm Impact Socket 1" Drive 57mm Impact Socket 1" Drive 58mm Impact Socket 1" Drive 59mm Impact Socket 1" Drive 60mm Impact Socket 1" Drive 62mm Impact Socket 1" Drive 63mm Impact Socket 1" Drive 65mm Impact Socket 1" Drive 67mm Impact Socket 1" Drive 68mm Impact Socket 1" Drive 70mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

KK2562 KK2563 KK2564 KK2565 KK2566 KK2567 KK2568 KK2569 KK2570 KK2571 KK2572 KK2573 KK2574 KK2575 KK2576 KK2577 KK2578 KK2579 KK2580 KK2581 KK2582 KK2583 KK2584 KK2585 KK2586 KK2587 KK2588 KK2589 KK2590 KK2591 KK2592 KK2593 KK2594 KK2595 KK2596 KK2597 KK2598 KK2599 KK2600 KK2601 KK2602 KK2603 KK2604 KK2605 KK2606 KK2607 KK2608

SOCKET SETS & ACCESSORIES

IMPACT SOCKETS 1" DRIVE METRIC & IMPERIAL

SocketS & Accessories

KINCROME

SOCKETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KK2609 KK2610 KK2611 KK2612 KK2613 KK2614 KK2615 KK2616 KK2617 KK2618 KK2626 KK2627 KK2628 KK2629 KK2630 KK2631 KK2632 KK2633 KK2634 KK2635 KK2636 KK2637 KK2638 KK2639 KK2640 KK2641 KK2642 KK2643 KK2644 KK2645 KK2646 KK2647 KK2648 KK2649 KK2650 KK2651 KK2652 KK2653 KK2654 KK2655 KK2656 KK2657 KK2658 KK2659 KK2660 KK2661 KK2662 KK2663

Impact Socket 1" Drive 73mm Impact Socket 1" Drive 75mm Impact Socket 1" Drive 76mm Impact Socket 1" Drive 78mm Impact Socket 1" Drive 80mm Impact Socket 1" Drive 85mm Impact Socket 1" Drive 89mm Impact Socket 1" Drive 90mm Impact Socket 1" Drive 92mm Impact Socket 1" Drive 95mm Impact Socket 1" Drive 11/16" Impact Socket 1" Drive 3/4" Impact Socket 1" Drive 13/16" Impact Socket 1" Drive 7/8" Impact Socket 1" Drive 15/16" Impact Socket 1" Drive 1" Impact Socket 1" Drive 1-1/16" Impact Socket 1" Drive 1-1/8" Impact Socket 1" Drive 1-3/16" Impact Socket 1" Drive 1-1/4" Impact Socket 1" Drive 1-5/16" Impact Socket 1" Drive 1-3/8" Impact Socket 1" Drive 1-7/16" Impact Socket 1" Drive 1-1/2" Impact Socket 1" Drive 1-9/16" Impact Socket 1" Drive 1-5/8" Impact Socket 1" Drive 1-11/16" Impact Socket 1" Drive 1-3/4" Impact Socket 1" Drive 1-13/16" Impact Socket 1" Drive 1-7/8" Impact Socket 1" Drive 1-15/16" Impact Socket 1" Drive 2" Impact Socket 1" Drive 2-1/16" Impact Socket 1" Drive 2-1/8" Impact Socket 1" Drive 2-3/16" Impact Socket 1" Drive 2-1/4" Impact Socket 1" Drive 2-5/16" Impact Socket 1" Drive 2-3/8" Impact Socket 1" Drive 2-7/16" Impact Socket 1" Drive 2-1/2" Impact Socket 1" Drive 2-9/16" Impact Socket 1" Drive 2-5/8" Impact Socket 1" Drive 2-11/16" Impact Socket 1" Drive 2-3/4" Impact Socket 1" Drive 2-13/16" Impact Socket 1" Drive 2-7/8" Impact Socket 1" Drive 2-15/16" Impact Socket 1" Drive 3"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SocketS & Accessories

DescriPtion

KK2664 KK2665 KK2666 KK2667 KK2668 KK2669 KK2670

Impact Socket 1" Drive 3-1/16" Impact Socket 1" Drive 3-1/8" Impact Socket 1" Drive 3-1/4" Impact Socket 1" Drive 3-3/8" Impact Socket 1" Drive 3-1/2" Impact Socket 1" Drive 3-5/8" Impact Socket 1" Drive 3-3/4"

IMPACT SOCKETS DEEP 1" DRIVE METRIC & IMPERIAL

KK2671 KK2672 KK2673 KK2674 KK2675 KK2676 KK2677 KK2678 KK2679 KK2680 KK2681 KK2682 KK2683 KK2684 KK2685 KK2686 KK2687 KK2688 KK2689 KK2690 KK2691 KK2692 KK2693 KK2694 KK2695 KK2696 KK2697 KK2698 KK2699 KK2700 KK2701 KK2702 KK2703 KK2704 KK2705 KK2706 KK2707 KK2708 KK2709

Impact Socket Deep 1" Drive 17mm Impact Socket Deep 1" Drive 19mm Impact Socket Deep 1" Drive 21mm Impact Socket Deep 1" Drive 22mm Impact Socket Deep 1" Drive 23mm Impact Socket Deep 1" Drive 24mm Impact Socket Deep 1" Drive 25mm Impact Socket Deep 1" Drive 26mm Impact Socket Deep 1" Drive 27mm Impact Socket Deep 1" Drive 28mm Impact Socket Deep 1" Drive 29mm Impact Socket Deep 1" Drive 30mm Impact Socket Deep 1" Drive 31mm Impact Socket Deep 1" Drive 32mm Impact Socket Deep 1" Drive 33mm Impact Socket Deep 1" Drive 34mm Impact Socket Deep 1" Drive 35mm Impact Socket Deep 1" Drive 36mm Impact Socket Deep 1" Drive 37mm Impact Socket Deep 1" Drive 38mm Impact Socket Deep 1" Drive 39mm Impact Socket Deep 1" Drive 40mm Impact Socket Deep 1" Drive 41mm Impact Socket Deep 1" Drive 42mm Impact Socket Deep 1" Drive 43mm Impact Socket Deep 1" Drive 46mm Impact Socket Deep 1" Drive 47mm Impact Socket Deep 1" Drive 48mm Impact Socket Deep 1" Drive 49mm Impact Socket Deep 1" Drive 50mm Impact Socket Deep 1" Drive 51mm Impact Socket Deep 1" Drive 52mm Impact Socket Deep 1" Drive 54mm Impact Socket Deep 1" Drive 55mm Impact Socket Deep 1" Drive 56mm Impact Socket Deep 1" Drive 57mm Impact Socket Deep 1" Drive 58mm Impact Socket Deep 1" Drive 59mm Impact Socket Deep 1" Drive 60mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SOCKETS & ACCESSORIES

IMPACT Sockets

100

Sockets & Accessories

KINCROME

SOCKETS & ACCESSORIES

IMPACT Sockets

Item No.

DescriPtion

KK2710 KK2711 KK2712 KK2713 KK2714 KK2715 KK2716 KK2717 KK2718 KK2719 KK2720 KK2721 KK2722 KK2723 KK2724 KK2725 KK2726 KK2727 KK2728 KK2729 KK2730 KK2731 KK2732 KK2733 KK2734 KK2735 KK2736 KK2737 KK2738 KK2739 KK2740 KK2741 KK2742 KK2743 KK2744 KK2745 KK2746 KK2747 KK2748 KK2749 KK2750 KK2751 KK2752 KK2753 KK2754

Impact Socket Deep 1" Drive 63mm Impact Socket Deep 1" Drive 65mm Impact Socket Deep 1" Drive 68mm Impact Socket Deep 1" Drive 70mm Impact Socket Deep 1" Drive 75mm Impact Socket Deep 1" Drive 80mm Impact Socket Deep 1" Drive 85mm Impact Socket Deep 1" Drive 90mm Impact Socket Deep 1" Drive 3/4" Impact Socket Deep 1" Drive 13/16" Impact Socket Deep 1" Drive 7/8" Impact Socket Deep 1" Drive 15/16" Impact Socket Deep 1" Drive 1" Impact Socket Deep 1" Drive 1-1/16 Impact Socket Deep 1" Drive 1-1/8" Impact Socket Deep 1" Drive 1-3/16 Impact Socket Deep 1" Drive 1-1/4" Impact Socket Deep 1" Drive 1-5/16 Impact Socket Deep 1" Drive 1-3/8" Impact Socket Deep 1" Drive 1-7/16 Impact Socket Deep 1" Drive 1-1/2" Impact Socket Deep 1" Drive 1-9/16 Impact Socket Deep 1" Drive 1-5/8" Impact Socket Deep 1" Drive 1-11/16 Impact Socket Deep 1" Drive 1-3/4" Impact Socket Deep 1" Drive 1-13/16 Impact Socket Deep 1" Drive 1-7/8" Impact Socket Deep 1" Drive 1-15/16 Impact Socket Deep 1" Drive 2" Impact Socket Deep 1" Drive 2-1/16 Impact Socket Deep 1" Drive 2-1/8" Impact Socket Deep 1" Drive 2-3/16 Impact Socket Deep 1" Drive 2-1/4" Impact Socket Deep 1" Drive 2-5/16 Impact Socket Deep 1" Drive 2-3/8" Impact Socket Deep 1" Drive 2-7/16 Impact Socket Deep 1" Drive 2-1/2" Impact Socket Deep 1" Drive 2-9/16 Impact Socket Deep 1" Drive 2-5/8" Impact Socket Deep 1" Drive 2-3/4" Impact Socket Deep 1" Drive 2-7/8" Impact Socket Deep 1" Drive 2-15/16 Impact Socket Deep 1" Drive 3" Impact Socket Deep 1" Drive 3-1/16 Impact Socket Deep 1" Drive 3-1/8"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

101

SocketS & Accessories IMPACT Socket Accessories

Item No.

DescriPtion

KK2114 KK2115 KK2116 KK2117 KK2118 KK2119 KK2110

Impact Adaptor 1" Female x 3/4" Male Impact Adaptor 1/2" Female x 3/4" Male Impact Adaptor 1/2" Female x 3/8" Male Impact Adaptor 3/4" Female x 1" Male Impact Adaptor 3/4" Female x 1/2" Male Impact Adaptor 3/8" Female x 1/2" Male Impact Adaptor 3/8" Female x 1/4" Male Impact Extension 1" Drive 150mm (6") Impact Extension 1" Drive 250mm (10") Impact Extension 1/2" Drive 150mm (6") Impact Extension 1/2" Drive 250mm (10") Impact Extension 1/2" Drive 75mm (3") Impact Extension 3/4" Drive 150mm (6") Impact Extension 3/4" Drive 250mm (10") Impact Extension 3/8" Drive 150mm (6") Impact Extension 3/8" Drive 75mm (3") Impact O Ring 1" Drive 17mm - 70mm Impact O Ring 1" Drive 75mm - 90mm Impact Pin 1" Drive 17mm - 70mm Impact Pin 1" Drive 75mm - 90mm Impact Universal Joint 1/2" Drive Impact Universal Joint 3/4" Drive Impact Universal Joint 3/8" Drive Ring & Pin Set 1/2" Drive 15mm - 32mm Ring & Pin Set 1/2" Drive 8mm - 14mm Ring & Pin Set 3/4" Drive 17mm - 49mm Ring & Pin Set 3/4" Drive 50mm - 70mm Ring & Pin Set 3/8" Drive 13mm - 22mm Ring & Pin Set 3/8" Drive 6mm - 12mm Torque Extension Bar 1/2" Drive 65lb 90Nm Yellow Torque Extension Bar 1/2" Drive 80lb 110Nm Green Torque Extension Bar 1/2" Drive 90lb 120Nm Pink Torque Extension Bar 1/2" Drive 100lb 135Nm Powder Blue Torque Extension Bar 1/2" Drive 110lb 150Nm Navy Blue Torque Extension Bar 1/2" Drive 120lb 160Nm White Torque Extension Bar 1/2" Drive 140lb 190Nm Black Torque Extension Bar 1/2" Drive 150lb 205Nm Grey Torque Extension Bar 1/2" Drive 175lb 240Nm Orange Torque Extension Bar 1/2" Drive 55lb 75Nm Red

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

KK2619 KK2280 KK2279 KK2534 KK2533 KK2201 KK2200 KK2620 KK2621 KK2282 KK2283 KK2281 KK2535 KK2536 KK2204 KK2203 KK2622 KK2623 KK2624 KK2625 KK2278 KK2532 KK2202 KK2285 KK2284 KK2537 KK2538 KK2199 KK2198 KK2111 KK2112 KK2113

SOCKETS & ACCESSORIES

IMPACT SOCKET ACCESSORIES

102

Socket Sets & Accessories

KINCROME

SOCKET SETS & ACCESSORIES

IMPACT Socket sets, accessory sets & socket sets

Item No.

DescriPtion

KK2026 KK2025 KK2020 KK2071 KK2070 KK2081 KK2080 KK2001 KK2021 KK2120

Flip Impact Socket Set 1/2" Drive 3 Piece Imperial Flip Impact Socket Set 1/2" Drive 3 Piece Metric Impact Socket Set 1/2" Drive 12 Piece Impact Socket Set 3/4" Drive 13 Piece Imperial Impact Socket Set 3/4" Drive 13 Piece Metric Impact Socket Set Deep 3/4" Drive 8 Piece Imperial Impact Socket Set Deep 3/4" Drive 8 Piece Metric Torx速 Impact Socket Set 1/2" Drive 8 Piece Wheel Nut Impact Socket Set 1/2" Drive 3 Piece Torque Extension Bar Set 1/2" Drive 10 Piece

Socket Sets & Accessory Sets Item No.

DescriPtion

K13365 K13366 K13551 K13341 K13340 K13540 K13541 K13552 K02091 K02090 KK2009

Deep Impact Socket Set 1/2" Drive 8 Piece Imperial Deep Impact Socket Set 1/2" Drive 8 Piece Metric Deep Socket Set 1/2" Drive 8 Piece Metric Deep Socket Set 1/4" Drive 8 Piece Imperial Deep Socket Set 1/4" Drive 8 Piece Metric Deep Socket Set 3/8" Drive 8 Piece Imperial Deep Socket Set 3/8" Drive 8 Piece Metric Deep Socket Set1/2" Drive 8 Piece Imperial Extension Wobble Bar Set 3/8" Drive 5 Piece Extension Wobble Bar Set 1/2" Drive 4 Piece Extension Wobble Bar Set 1/4", 3/8", 1/2" Drive 9 Piece Go Through Flexible Socket Set 13 Piece Impaerial / Metric / Torx速 (M) Go Through Socket & Bit Set 27 Piece Metric Go Through Socket & Bit Set 62 Piece Imperial / Metric Hex Bit Impact Socket Set 1/2" Drive 8 Piece Imperial Hex Bit Socket Set 1/2" Drive 8 Piece Imperial Hex Bit Socket Set 1/2" Drive 8 Piece Metric Impact Socket Set 1/2" Drive 10 Piece Imperial Impact Socket Set 1/2" Drive 10 Piece Metric Lok-On Socket Set 1/2" Drive 40 Piece Imperial / Metric Lok-On Socket Set 1/4", 3/8" Drive 39 Piece Imperial / Metric Socket & Spanner Set 1/2" Drive 35 Piece Imperial / Metric Socket Set 1/2" Drive 25 Piece Imperial /Metric Socket Set 1/2" Drive 25 Piece Metric Socket Set 1/2" Drive 39 Piece Imperial / Metric Socket Set 1/2" Drive 40 Piece Imperial /Metric Socket Set 1/2" Drive 56 Piece Imperial /Metric Socket Set 1/4" Drive 24 Piece Imperial / Metric Socket Set 1/4" Drive 44 Piece Imperial / Metric Socket Set 1/4", 3/8" Drive 39 Piece Imperial /Metric Socket Set 1/4", 3/8" Drive 43 Piece Imperial / Metric

KK2045 KK2046 KK2047 KK2000 K13626AF K13626M K13359AF K13359M KK2042 KK2039 K13424P K13418P K13417P K13412P K13425P K13454P K13336P K13335P K13530P K02043P

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

103

spanners & spanner sets individual

Socket AccessorIES Item No.

DescriPtion

KK2072 KK2078 KK2076 KK2077 KK2008 KK2075 KK2074 KK2073

3 Piece Socket Clip Rail 5 Piece Spare Rail Clip 1/2" Drive 5 Piece Spare Rail Clip 1/4" Drive 5 Piece Spare Rail Clip 3/8" Drive Sizecatcher Imperial / Metric Socket Rail 14 Clip 1/2" Drive Socket Rail 17 Clip 3/8" Drive Socket Rail 20 Clip 1/4" Drive

Spanners - Individual Item No.

DescriPtion

COMBINATION SPANNERS METRIC & IMPERIAL

KK3106 KCM07C KCM08C KCM09C KCM10C KCM11C KCM12C KCM13C KCM14C KCM15C KCM16C KCM17C KCM18C KCM19C KCM20C KCM21C KCM22C KCM23C KCM24C KCM27 KCM30 KCM32

Spanner Combination 6mm Spanner Combination 7mm Spanner Combination 8mm Spanner Combination 9mm Spanner Combination 10mm Spanner Combination 11mm Spanner Combination 12mm Spanner Combination 13mm Spanner Combination 14mm Spanner Combination 15mm Spanner Combination 16mm Spanner Combination 17mm Spanner Combination 18mm Spanner Combination 19mm Spanner Combination 20mm Spanner Combination 21mm Spanner Combination 22mm Spanner Combination 23mm Spanner Combination 24mm Spanner Combination 27mm Spanner Combination 30mm Spanner Combination 32mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SPANNERS & SPANNER SETS

DescriPtion

KP2027 Socket Set 3/4" Drive 26 Piece Imperial / Metric K13367 Socket Set 3/4" Drive 26 Piece Imperial / Metric K13539P Socket Set 3/8" Drive 34 Piece Imperial / Metric K13542P Socket Set 3/8" Drive 45 Piece Imperial /Metric K02093 E-Torx速 Socket Set on Rail 1/4", 3/8" Drive 10 Piece K02094 Torx速 Socket Set on Rail 1/2" Drive 9 Piece Note: Free Replacement Plastic Socket Trays are available on all current products. Replacement EVA trays are available POA.

KINCROME

Item No.

104

Spanners & Spanner Sets

KINCROME

SPANNERS & SPANNER SETS

Individual

Item No.

DescriPtion

KCM36 KK3163 KK3164 KK3165 KC08C KC10C KC12C KC14C KC16C KC18C KC20C KC22C KC24C KC26C KC28C KC30C KC32C KC34C KC36C KC40C KC42C KK3140 KK3141 KC48C KK3143 KK3144 KK3145

Spanner Combination 36mm Spanner Combination 41mm Spanner Combination 46mm Spanner Combination 50mm Spanner Combination 1/4" Spanner Combination 5/16" Spanner Combination 3/8" Spanner Combination 7/16" Spanner Combination 1/2" Spanner Combination 9/16" Spanner Combination 5/8" Spanner Combination 11/16" Spanner Combination 3/4" Spanner Combination 13/16" Spanner Combination 7/8" Spanner Combination 15/16" Spanner Combination 1" Spanner Combination 1-1/16" Spanner Combination 1-1/8" Spanner Combination 1-1/4" Spanner Combination 1-5/16" Spanner Combination 1-3/8" Spanner Combination 1-7/16" Spanner Combination 1-1/2" Spanner Combination 1-5/8" Spanner Combination 1-3/4" Spanner Combination 1-7/8"

FLARE NUT SPANNERS METRIC & IMPERIAL

KFS1011 KFS1213 KK3386 KFS1517 KK3392 KFS1214 KFS1618 KFS2022 KK3374

Spanner Flare Nut 10 x 11mm Spanner Flare Nut 12 x 13mm Spanner Flare Nut 13 x 14mm Spanner Flare Nut 15 x 17mm Spanner Flare Nut 19 x 22mm Spanner Flare Nut 3/8" x 7/16" Spanner Flare Nut 1/2" x 9/16" Spanner Flare Nut 5/8" x 11/16" Spanner Flare Nut 3/4" x 7/8"

GEAR SPANNERS METRIC & IMPERIAL

KK030031 KK030032 KK030033 KK030034 KK030035 KK030036 KK030037 KK030038 KK030039 KK030040

Reverse Gear Combination Spanner 8mm Reverse Gear Combination Spanner 9mm Reverse Gear Combination Spanner 10mm Reverse Gear Combination Spanner 11mm Reverse Gear Combination Spanner 12mm Reverse Gear Combination Spanner 13mm Reverse Gear Combination Spanner 14mm Reverse Gear Combination Spanner 15mm Reverse Gear Combination Spanner 16mm Reverse Gear Combination Spanner 17mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

105

Spanners & Spanner Sets

DescriPtion

KK030042 KK030043 KK030044 KK030045 KK030011 KK030012 KK030013 KK030014 KK030015 KK030016 KK030017 KK030018

Reverse Gear Combination Spanner 19mm Reverse Gear Combination Spanner 21mm Reverse Gear Combination Spanner 22mm Reverse Gear Combination Spanner 24mm Reverse Gear Combination 5/16" Reverse Gear Combination 3/8" Reverse Gear Combination 7/16" Reverse Gear Combination 1/2" Reverse Gear Combination 9/16" Reverse Gear Combination 5/8" Reverse Gear Combination 11/16" Reverse Gear Combination 3/4"

OPEN END SPANNERS METRIC & IMPERIAL

KK3270 KCO0809MC KCO1011MC KCO1213MC KCO1415MC KCO1617MC KCO1819MC KK3278 KK3279 KK3283 KK3285 KCO810C KCO1214C KK3252 KCO1618C KCO1820C KCO2022C KK3251 KCO2428C KCO2628C KCO3032C KK3254 KK3253

Spanner Open End 6 x 7mm Spanner Open End 8 x 9mm Spanner Open End 10 x 11mm Spanner Open End 12 x 13mm Spanner Open End 14 x 15mm Spanner Open End 16 x 17mm Spanner Open End 18 x 19mm Spanner Open End 20 x 22mm Spanner Open End 21 x 23mm Spanner Open End 24 x 27mm Spanner Open End 30 x 32mm Spanner Open End 1/4" x 5/16" Spanner Open End 3/8" x 7/16" Spanner Open End 7/16" x 1/2" Spanner Open End 1/2" x 9/16" Spanner Open End 9/16" x 5/8" Spanner Open End 5/8" x 11/16" Spanner Open End 11/16" x 3/4" Spanner Open End 3/4" x 7/8" Spanner Open End 13/16" x 7/8" Spanner Open End 15/16" x 1" Spanner Open End 15/16" x 1-1/16" Spanner Open End 1-1/8" x 1-1/4"

RING SPANNERS METRIC & IMPERIAL

KK3300 KDR0809MC KDR1011MC KDR1213MC KDR1415MC KDR1617MC KDR1819MC KK3309 KK3310 KK3313 KK3315

Spanner Double Ring 6 x 7mm Spanner Double Ring 8 x 9mm Spanner Double Ring 10 x 11mm Spanner Double Ring 12 x 13mm Spanner Double Ring 14 x 15mm Spanner Double Ring 16 x 17mm Spanner Double Ring 18 x 19mm Spanner Double Ring 20 x 22mm Spanner Double Ring 21 x 23mm Spanner Double Ring 24 x 27mm Spanner Double Ring 30 x 32mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SPANNERS & SPANNER SETS

Individual

106

Spanners & Spanner Sets

KINCROME

SPANNERS & SPANNER SETS

Individual & spanner sets

Item No.

DescriPtion

KK3290 KDR1214C KK3298 KDR1618C KDR1820C KK3292 KDR2224C KK3293 KDR2628C KDR3032C KK3296 KK3297

Spanner Double Ring 1/4" x 5/16" Spanner Double Ring 3/8" x 7/16" Spanner Double Ring 7/16" x 1/2" Spanner Double Ring 1/2" x 9/16" Spanner Double Ring 9/16" x 5/8" Spanner Double Ring 5/8" x 11/16" Spanner Double Ring 11/16" x 3/4" Spanner Double Ring 3/4" x 7/8" Spanner Double Ring 13/16" x 7/8" Spanner Double Ring 15/16" x 1" Spanner Double Ring 1" x 1-1/8" Spanner Double Ring 1-1/8" x 1-1/4"

Spanner Sets Item No.

DescriPtion

COMBINATION, DOUBLE RING & OPEN END SPANNER SETS

KK3020 K1352313 K1352214 K1352416 KK3024 K1352424 KK3028 KK3029 KK3030 KK3050 KK3051 KK3052 KK3022 KK3021 KK3041 KK3040 KK3042

Spanner Set Combination 12 Piece Imperial / Metric Spanner Set Combination 13 Piece Imperial Spanner Set Combination 14 Piece Metric Spanner Set Combination 16 Piece Imperial / Metric Spanner Set Combination 22 Piece Metric Spanner Set Combination 24 Piece Imperial / Metric Spanner Set Combination Silverline 17 Piece Metric Spanner Set Combination Silverline 22 Piece Imperial / Metric Spanner Set Combination Silverline 30 Piece Imperial / Metric Spanner Set Double Ring 11 Piece Metric Spanner Set Double Ring 12 Piece Imperial Spanner Set Double Ring 12 Piece Imperial / Metric Spanner Set Jumbo Combination 10 Piece Metric Spanner Set Jumbo Combination 7 Piece Imperial Spanner Set Open End 10 Piece Imperial Spanner Set Open End 11 Piece Metric Spanner Set Open End 12 Piece Imperial / Metric

CROW FOOT WRENCH SET

KK030008

Crow Foot Wrench Set 3/8" Drive 8 Piece Metric

FLARE NUT SPANNER SETS

KK3061 KK3062

Flare Nut Spanner Set 5 Piece Metric Flare Nut Spanner Set 4 Piece Imperial

GEAR SPANNER SETS

KK3007 KK030026 KK030025 KK3006 KK3015

12-In-3 Reverse Gear Spanner Set 3 Piece Metric Flex Lock Gear Spanner Set 7 Piece Imperial Flex Lock Gear Spanner Set 7 Piece Metric Gear Spanner Set 10 Piece Metric Gear Spanner Set 15 Piece Metric

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

107

pliers & wrenches

DescriPtion

KK3004 KK3005 KK030004 KK030003 KK030006 KK030005 KK3014 KK030024 KK030023 TUBE SPANNER SETS K25301 K25302

Gear Spanner Set 4 Piece Metric Gear Spanner Set 5 Piece Metric Reverse Combination Gear Spanner Set 7 Piece Imperial Reverse Combination Gear Spanner Set 7 Piece Metric Reverse Double Ring Gear Spanner Set 4 Piece Imperial Reverse Double Ring Gear Spanner Set 6 Piece Metric Reverse Gear Spanner Set 14 Piece Imperial /Metric Reverse Stubby Gear Spanner Set 7 Piece Imperial Reverse Stubby Gear Spanner Set 7 Piece Metric Spanner Set Tube 10 Piece Metric Spanner Set Tube 10 Piece Imperial

Adjustable Wrenches & Pipe Wrenches Item No.

DescriPtion

KK040001 KK040002 KK040003 KK040004 KK040005 KK040006 KK040007 KK040008

Adjustable Wrench 100mm (4") Adjustable Wrench 150mm (6") Adjustable Wrench 200mm (8") Adjustable Wrench 250mm (10") Adjustable Wrench 300mm (12") Adjustable Wrench 375mm (15") Adjustable Wrench 450mm (18") Adjustable Wrench 600mm (24") "Shammer" Adjustable Wrench 300mm (12") KK4300 Adjustable Wrench with Hammer Head KK040020 Pipe Wrench 250mm (10") KK040021 Pipe Wrench 300mm (12") KK040022 Pipe Wrench 360mm (14") KK040023 Pipe Wrench 450mm (18") KK040024 Pipe Wrench 600mm (24") KK040025 Pipe Wrench 900mm (36") KPW10J Pipe Wrench Jaws To Suit 250mm (10") KPW12J Pipe Wrench Jaws To Suit 300mm (12") KPW14J Pipe Wrench Jaws To Suit 360mm (14") KPW18J Pipe Wrench Jaws To Suit 450mm (18") KPW24J Pipe Wrench Jaws To Suit 600mm (24") KPW36J Pipe Wrench Jaws To Suit 900mm (35") Note: Repair Kits and Replacement Pins are available for all Kincrome Adjustable Wrenches

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

PLIERS & WRENCHES

Individual

108

Pliers, nibblers & riveters

KINCROME

PLIERS, NIBBLERS & RIVETERS

Circlip Pliers

Item No.

DescriPtion

KK040043 KK040044 KK040050 KK040041 KK040042 KK4042 KK4043 KK4045 KK4044 KK4041

Circlip Plier 175mm (7") External Bent Circlip Plier 175mm (7") External Straight Circlip Plier 175mm (7") Flag Tip Circlip Plier 175mm (7") Internal Bent Circlip Plier 175mm (7") Internal Straight Mini Circlip Plier 125mm (5") External Bent Mini Circlip Plier 125mm (5") External Straight Mini Circlip Plier 125mm (5") Flag Tip Mini Circlip Plier 125mm (5") Internal Bent Mini Circlip Plier 125mm (5") Internal Straight

CIRCLIP PLIER SETS

KK4040

Circlip Plier Set 175mm (7") 5 Piece Circlip Plier Set 175mm (7") Combination includes 4 interchangeable heads and cushion grip handles Mini Circlip Plier Set 125mm (5") 5 Piece

K17294 KK4046 Crimping Pliers & Stripping Pliers

K5000 KK4001 K17044

5 Way Crimping Plier 225mm (9") Automatic Wire Stripper with Crimper 200mm (8") Automatic Wire Stripper 165mm (6-1/2") Crimping Tool Set Deluxe includes Crimping Plier, 100 Assorted Crimping Terminals, Wire Stripper, PVC Tape MIG Welding Plier 205mm (8") Ratchet Crimping Plier 210mm (9")

KK040045 K171020 K17047 Hand Nibbler & Tin Snip Pliers

K04080 K04081 KTSLC KTSRHC KTSSC

Hand Nibbler 250mm (10") Hand Nibbler Spare Blades for K04080 Tin Snip Plier 260mm (10") Left Hand Cut Tin Snip Plier 260mm (10") Right Hand Cut Tin Snip Plier 260mm (10") Straight Cut

Riveters

KCL700 KCL860 KCL800 KCL860-16

Hand Riveter 250mm (10") Lazy Tong Riveter 845mm Open, 320mm Closed Pivot Head Hand Riveter 275mm (11") Spare Jaws for Riveters to Suit CL700, CL800 & CL860

Standard Pliers & Locking Pliers

KK040027 KK040036 KK040037 KK040028 KK040029 K171010 KK040016 KK040017 KK040018 KK040019 KK040009 KK040010 KK040011 KK040038

Cable Cutter 200mm (8") Combination Plier 175mm (7") Combination Plier 200mm (8") Diagonal Cutting Plier 150mm (6") Diagonal Cutting Plier 200mm (8") Linesman Plier 225mm (9") Locking Plier 125mm (5") Locking Plier 175mm (7") Locking Plier 250mm (10") Locking Plier 300mm (12") Locking Plier Long Nose 100mm (4") Locking Plier Long Nose 150mm (6") Locking Plier Long Nose 225mm (9") Long Nose Plier 150mm (6")

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

109

screwdrivers & fastening

DescriPtion

KK040039 KK040040 K1702010 K1702012 K1702016

Long Nose Plier 200mm (8") Long Nose Plier Bent 200mm (8") Multi Grip Plier 250mm (10") Multi Grip Plier 300mm (12") Multi Grip Plier 400mm (16")

TorqueMasterTM Screwdrivers & Sets Item No.

DescriPtion

K32080 K32008 K32003 K32009 K32013 K32004 K32005 K32018 K32006 K32001 K32002 K32010 K32017 K32011 K32025 K32023 K32027 K32026 K32024 K32028 K32020 K32021 K32022 K32030 K32031 K32042 K32043 K32040 K32041 K32082 K32083 K32086 K32087

Magnetic Bit Driver with Torque Master Handle Screwdriver Blade 100mm x 5mm Screwdriver Blade 100mm x 6mm Screwdriver Blade 150mm x 5mm Screwdriver Blade 150mm x 6mm Screwdriver Blade 150mm x 8mm Screwdriver Blade 200mm x 9.5mm Screwdriver Blade 250mm x 6mm Screwdriver Blade 250mm x 9.5mm Screwdriver Blade 38mm x 6mm Screwdriver Blade 75mm x 3.2mm Screwdriver Blade Instrument 100mm x 4mm Screwdriver Blade Instrument 150mm x 3mm Screwdriver Blade Instrument 150mm x 5mm Screwdriver Phillips 100mm x No.1 Screwdriver Phillips 100mm x No.2 Screwdriver Phillips 150mm x No.1 Screwdriver Phillips 150mm x No.2 Screwdriver Phillips 150mm x No.3 Screwdriver Phillips 200mm x No.2 Screwdriver Phillips 38mm x No.2 Screwdriver Phillips 75mm x No.0 Screwdriver Phillips 75mm x No.1 Screwdriver Phillips Long 250mm x No.1 Screwdriver Phillips Long 250mm x No.2 Screwdriver Pozi 100mm x No.2 Screwdriver Pozi 150mm x No.3 Screwdriver Pozi 38mm x No.2 Screwdriver Pozi 75mm x No.1 Screwdriver Robertson 6 x 100mm #1 Screwdriver Robertson 6 x 100mm #2 Screwdriver Robertson 8 x 125mm #1 Screwdriver Robertson 8 x 125mm #2

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

SCREWDRIVERS & FASTENING

torquemasterTM screwdrivers

110

SCREWDRIVERS & FASTENING

TorqueMasterTM Sets, screwdriver sets & accessories, bit sets & key sets

Item No.

DescriPtion

KINCROME

SCREWDRIVERS & FASTENING

TORQUEMASTER SETS

K32069 K32064 KK5032 K32061 KK5080 KK5020 K32060

Go Through Screwdriver Set 12 Piece Screwdriver Set 13 Piece Screwdriver Set 4 Piece Screwdriver Set 8 Piece Screwdriver Set Extra Long 3 Piece Screwdriver Set Insulated 6 Piece Screwdriver Wall Set 8 Piece

Screwdrivers Sets & Accessories

KK5028 KK5005 KID3555 KID3400 KK5001 KK5038 KK5060 KK050002 K16066C KK5052 KK5053 K13686

28 Function Screwdriver Set 16 Piece Circuit Tester AC 110 - 500V Impact Driver Bits 13 Piece to Suit KID3400 Impact Screwdriver Set 1/2" Drive 14 Piece Magnetiser & Demagnetiser Mini Screwdriver Set 8 Piece Mini Stubby Screwdriver Set 2 Piece Mini Torx® Screwdriver Set 6 Piece Precision Screwdriver Set 6 Piece Screwdriver Set 10 Piece Acetate Handles Screwdriver Set 14 Piece Acetate Handles Stubby Ratchet Screwdriver & Bit Set 7 Piece

Bit Sets

KK5100 K13784 KK5024 KK5023 K13681 KK5014 K13648 K02093 K13646 K13645 K13642 K33520 KK5025 KK5101

Colour Coded Bit Set 25 Piece Magnetic 1/4" Shank Hex & Spline Drive Kit 23 Piece Hex Socket Set 11 Piece Imperial 1/4", 3/8" Drive Hex Socket Set 11 Piece Metric 1/4", 3/8" Drive Magnum Bit Box Set 19 Piece Mini Ratchet Bit Set 10 Piece 1/4" Drive Security Bit Holder Set 33 Piece E-Torx® Socket Set 10 Piece 1/4", 3/8" Drive Tamperproof Torx® Set 11 Piece 1/4", 3/8" Drive Tamperproof Torx® Set 8 Piece 1/4" Hex Drive Torx® Bit Set 8 Piece 1/4" Hex Shank Torx® Bit/Socket Set 1/4", 3/8", 1/2" Drive 40 Piece Torx® Socket Set 11 Piece 1/4", 3/8" Drive Universal Bit Set 128 Piece Wonder Screwdriver & Bit Set 15 Piece comes complete with a handy belt clip

K32076 Key Sets & T-Handle Hex Key Wrench Sets

KK5042 KK5043 KK5045 KK5046 K13057AF K13057M KHKW25C

Ball Point Hex Key Set 9 Piece Long Series Imperial Ball Point Hex Key Set 9 Piece Long Series Metric Hex Key Set 6 Piece Imperial Folding Type Hex Key Set 7 Piece Metric Folding Type Hex Key Set 8 Piece Imperial Hex Key Set 8 Piece Metric Hex Key Wrench Set 25 Piece Imperial / Metric

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

111

cut / scrape / saw

DescriPtion

KHKW25C KHKW30 KK5048 K13647 KK5044 KK5149 KK5009

Hex Key Wrench Set 25 Piece Imperial / Metric Hex Key Wrench Set 30 Piece Imperial / Metric Tamperproof Torx® Key Set 10 Piece Folding Type Tamperproof Torx® Key Set 8 Piece Folding Type Tamperproof Torx®Key Set 9 Piece Long Series Torx® Key Set 10 Piece Folding Type Torx® Key Set 9 Piece Long Series T-Handle Hex Key Wrench Set 7 Piece Imperial supplied complete in blow mould case with a metal rack T-Handle Hex Key Wrench Set 7 Piece Metric supplied complete in blow mould case with a metal rack

KK5041 KK5040

KINCROME

Item No.

cut / scrape / saw

bolt cutters

Merchandising

K19032

Merchandiser - Screwdriver 53 Piece includes Merchandiser Board and "Take the Torque Test" comparison screwdriver

Bolt Cutters Item No.

DescriPtion

KBC14 KBC18 KBC24 KBC30 KBC36 KBC14J KBC18J KBC24J KBC30J KBC36J

Bolt Cutter 350mm (14") Bolt Cutter 450mm (18") Bolt Cutter 600mm (24") Bolt Cutter 750mm (30") Bolt Cutter 900mm (36") Bolt Cutter Jaws to fit 350mm (14") Bolt Cutter Bolt Cutter Jaws to fit 450mm (18") Bolt Cutter Bolt Cutter Jaws to fit 600mm (24") Bolt Cutter Bolt Cutter Jaws to fit 750mm (30") Bolt Cutter Bolt Cutter Jaws to fit 900mm (36") Bolt Cutter

file sets Item No.

DescriPtion

KK6308 KK6310 KK6315

File Set 3 Piece 200mm (8") Bastard Cut File Set 3 Piece 250mm (10") 2nd Cut File Set 5 Piece 250mm (10") Bastard / 2nd Cut

hacksaws & MISC Item No.

KK6012 K400 K06058 K06059 KK6015 KK060067

DescriPtion

Hacksaw Frame Heavy Duty 300mm (12") - supplied with blade Hacksaw Frame Heavy Duty 300mm (12") with Bonus Utility Knife - supplied with blade Mini Hook & Pick Set 4 Piece Scraper & Remover Set 5 Piece Tool Box Saw 350mm (15") - 9 Points / 8 TPI Window Scraper with SK5 blade

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

112

CUT / SCRAPE / SAW Knives & Replacement Blades,

planes, pocket planes, pocket tool kits & snaging tools

Item No.

DescriPtion

KINCROME

CUT / SCRAPE / SAW

KNIVES & replacement blades

v Aluminium Folding Lock Back Knife with 5 spare SK5 blades and Leather Pouch KK060012 Folding Lock Back Utility Knife Deluxe with 5 spare SK5 blades KK060011 Folding Lock Back Utility Knife with 10 spare SK5 blades and belt pouch KK060045 Folding Lock Back Utility Knife with Quick Release Blade includes 5 spare SK5 blades KK060065 Mini Folding Lock Back Knife with 5 spare SK5 blades, key chain and belt clip KK060064 Speed Feed Utility Knife with 10 spare SK5 blades KK060041 Twin Blade Folding Lock Back Knife with 10 spare SK5 blades KK060073 Mini Blades SK5 6 Piece to Suit KK060065 KK060076 Replacement Blades SK5 10 Piece to Suit K060041 KK060071 Utility Knife Blades SK5 10 Piece to Suit KK060064, KK060011, KK060012, KK060057 KK060072 Utility Knife Blades SK5 50 Piece to Suit KK060064, KK060011, KK060012, KK060057 Note: Kincrome Folding Lock Back Utility Knives offer the ultimate design for all cutting jobs around the workshop, house or outdoors. They are perfect for the Tradesman or the DIY handyman. Features include: • Stainless steel and lightweight aluminium construction for strength and durability • Quick blade change mechanism • Ergonomic handles • SK5 blades. SK5 Blades are manufactured from high quality Japanese steel, are extra sharp, and are longer lasting than the standard utility blade Planes

KK6002 KK6003 KK6000 KK6001

Block Plane 175mm Block Plane 25mm Jack Plane 350mm Smooth Plane 225mm

Pocket Tool Kits

K67059 Mini Pocket Tool Kit 9 Function 110mm K67058 Pocket Tool Kit 18 Function 180mm K67060 Pocket Tool Kit 18 Function 200mm KK060020 Pocket Tool Kit 20 Function 180mm KK060028 Pocket Tool Kit 28 Function 180mm includes 11 x 25mm Bits & 1/4" Socket with Holder KK6008 Pocket Tool Kit with LED Light 8-in-1 Kincrome Pocket Tool Kits are manufactured from stainless steel and range from the popular 9 Function Mini Pocket Tool to the rugged 28 Function Multi Tool with 12 Bits and 1/4" Socket. Each Kincrome Pocket Tool comes with a convenient Carry Pouch. Swaging Tools

KK6014 KK6024

Swaging Tool 350mm (14") Swaging Tool 600mm (24")

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

113

TOOL BOXES & STORAGE blue steel, Series 1,

stainless steel tool boxes, chests, trolleys, cantilever & cabinets

Item No.

DescriPtion

Blue Steel 26" Add-On Tool Chest 3 Drawer Blue Steel 26" Add-On Tool Chest 3 Drawer Extra Deep Blue Steel 26" Tool Chest 10 Drawer Extra Deep Blue Steel 26" Tool Chest 6 Drawer Blue Steel 26" Tool Chest 8 Drawer Blue Steel 26" Tool Chest 9 Drawer Blue Steel 26" Tool Trolley 3 Drawer Blue Steel 26" Tool Trolley 7 Drawer Blue Steel 26" Tool Trolley 9 Drawer Blue Steel 41" Tool Chest 8 Drawer Blue Steel 41" Tool Trolley 9 Drawer Blue Steel 52" Tool Chest 10 Drawer Blue Steel 52" Tool Trolley 10 Drawer Blue Steel 66" Tool Chest 12 Drawer Blue Steel 66" Tool Trolley 12 Drawer Blue Steel Add-On Side Locker 2 Drawer

Series 1 Tool Boxes

KK070005 KK070003 KK070004 KK7057 KK070009 KK070055 KK070006

Series 1 Add On Tool Chest 3 Drawer Series 1 Tool Box Stack includes 6 Drawer Chest, 3 Drawer Add On Tool Chest, 6 Drawer Tool Trolley Series 1 Tool Chest 6 Drawer Series 1 Tool Chest 7 Drawer Extra Deep Series 1 Tool Chest 9 Drawer Series 1 Tool Trolley 5 Drawer Series 1 Tool Trolley 6 Drawer

Stainless Steel

KK7302 KK7303

Stainless Steel Tool Chest & Drawer Stainless Steel Tool Trolley 11 Drawer

Chests, Trolleys, Cantilever & cabinets

K51004 K51005 KK7900 K51065 K51015 KK070076 KK070061 K51002 K51003 KK070027 KK7095 KK7071 KK7072 KK7090 K51083 KK7013

Cantilever Tool Box 5 Tray Cantilever Tool Box Large 5 Tray Electronic Safe Upright ideal for storing Firearms & Ammunition (Catergory A & B Compliant), Documents, Stamps, Coins and Valuables Giant Wall Cabinet W:750mm D:225mm H:890mm Large Workshop Cabinet W:612mm D:192mm H:902mm Magnetic Tool Tray Set 4 Piece attaches to any flat steel surface for quick and easy tool access Professional Service Case ABS Storage Cabinet 16 Drawer Storage Cabinet Large 36 Drawer Strong Box W:1067mm D:508mm H:595mm Tool Box with Cantilever Tray Tool Cart 3 Tier W:800 D:385mm H:745mm Tool Cart Deluxe 2 Drawer W:1440mm D:420mm H:902mm Tool Chest 3 Drawer Ball Bearing Utility Tool Box with Lift Out Tray Wall Cabinet 3 Door L:1200mm W:200mm D:600mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

KK7763 KK7753 KK7755 KK7766 KK7768 KK7769 KK7764 KK7767 KK7750 KK7760 KK7765 KK7770 KK7775 KK7780 KK7785 KK7751

TOOL BOXES & STORAGE

BLUE STEEL tool boxes

114

TOOL BOXES & STORAGE Truck, Ute & GARAGE StORage

Item No.

DescriPtion

KINCROME

TOOL BOXES & STORAGE

HEAVY GAUGE SHEET STEEL WITH CHARCOAL HAMMERTONE FINISH

K51016 K51020 K51062 K51082 K51084 K51085 K51088 K51088TRAY K51095 K51098 K51220 KK51028 KK51029

Upright Truck Box 712mm Upright Truck Box 1500mm Truck Box 2 Drawer 550mm Agricultural Tool Chest 9 Drawer 686mm Tradesman Box Small 765mm Truck Box 3 Drawer 700mm Tradesman Box Large 1200mm Lift Out Tray for K51088 Tradesman Box Large Road Train Box 4 Drawer 880mm Tradesman Box Twin Pack 760mm, 1137mm Upright Truck Box 1220mm Under Ute Steel Box Left Hand Side 750mm Under Ute Steel Box Right Hand Side 750mm

CHEQUER PLATE ALUMINIUM truck boxes

K51030 K51033 K51034 K51035 K51036 K51037 K51038 K51039 K51042 K51043 K51046 K51047 K51049 K51050 K51051 K51058

Aluminium Truck Box Set 3 Piece includes K51033, K51034, K51035 Aluminium Truck Box 765mm AluminiumTruck Box 1230mm AluminiumTruck Box 1450mm Upright Aluminium Truck Box 900mm Upright AluminiumTruck Box 1210mm Upright Aluminium Truck Box 1450mm Upright Aluminium Low Side 1210mm Under Ute Aluminium Truck Box Left Hand Side 750mm Under Ute Aluminium Truck Box Right Hand Side 750mm Under Ute Aluminium Truck Box Left Hand Side 600mm Under Ute Aluminium Truck Box Right Hand Side 600mm Upright Truck Box 5 Drawer 1450mm Low Profile Aluminium Truck Box 1210mm Low Profile Aluminium Truck Box 1500mm Under Ute Water Tank 40L

Garage Storage

KK070037 KK070038 KK070039 KK070040 KK070040SH KK070041 KK070042 KK7043 KK7044 KK7044-1 KK7044-2 KK7044-3 KK7044-4 KK7044-5 KK7044-6

Garage WorX Workshop 5 Piece, a complete modular garage storage system for your workshop or home garage, Contents: 1 each KK070038, KK070040, KK070042, KK070039, KK070041 Garage WorX Wall Cabinet 2 Door W:762mm D:306mm H:767mm Garage WorX Mobile Trolley 2 Door W:675mm D:460mm H:890mm (including castors) Garage WorX Mobile Utility Cabinet 2 Door W:762mm D:458mm H:1675mm (including castors) Garage WorX Shelf Unit to Suit KK070040 Garage WorX Mobile Trolley 5 Drawer W:675mm D:460mm H:890mm (including castors) Garage WorX Work Bench W:2134mm D:633mm H:906mm RTA (ready to assemble) Garage Hooks 12 Piece includes 12 multi purpose hooks (6 types) with heavy duty painted coating, screws and wall plugs Hook Track System 8 Piece includes 2 Aluminium Wall Racks and 6 Rubber Coated Steel Hooks parts available individually see below Aluminium Track 2 Piece Hose Hook suitable for Hoses (Garden, Air, Vacuum etc) Multi Hook suitable for Shears, Loppers, Garden Hand Tools, Trowels, Shovels S Hooksuitable for Long Handled Tools (Shovels, Rakes, Spades, Hoes etc) Long Hook suitable for Step Ladders, Ladders, Assorted Tools Short Hook suitable for Step Ladders, Ladders, Assorted Tools

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

115

TOOL BOXES & STORAGE

industrial storage, plastic storage & multi storage

KK7048 KK7100 KK7101 KK7805 KK7044-1 KK7044-2 KK7044-3 KK7044-4 KK7044-5 KK7044-6 KK7044-7

Power Tool / Bike Hook suitable for Line Trimmers, Hedge Trimmers, Various Power Tools, Most Bicycles Peg Board (3 Panels) with 40 Hooks Garage Storage Shelf System Large 5 Shelf W:1225mm D:615mm H:1830mm Garage Storage Shelf System Extra Large 5 Shelf W:1680mm D:615mm H:1830mm Garage WorX Laminate Cabinets 5 Piece Set storage system for your workshop or home garage, Contents: 1 each KK7800, KK7801, KK7802, KK7803, KK7804 Aluminium Track 2 Piece Hose Hook suitable for Hoses (Garden, Air, Vacuum etc) Multi Hook suitable for Shears, Loppers, Garden Hand Tools, Trowels, Shovels S Hooksuitable for Long Handled Tools (Shovels, Rakes, Spades, Hoes etc) Long Hook suitable for Step Ladders, Ladders, Assorted Tools Short Hook suitable for Step Ladders, Ladders, Assorted Tools Power Tool / Bike Hook suitable for Line Trimmers, Hedge Trimmers, Various Power Tools, Most Bicycles

TOOL BOXES & STORAGE

KK7044-7

DescriPtion

KINCROME

Item No.

Industrial Storage Item No.

DescriPtion

KK7103 KK7104 KK7105 KK7104-1 KK7104-2 KK7106 KK7107 KK7108 KK7109 KK7110 KK7111

Industrial Shelving 4 Tier W:1960mm D:610mm H:1830mm Storage Rack 24 Tub comes flat packed W:860mm D:235mm H:638mm Storage Rack 43 Tub comes flat packed W:860mm D:330mm H:1145mm Small Tub to Suit KK7104, KK7105 Large Tub to Suit KK7104, KK7105 Mobile Storage Rack 22 Tub comes flat packed W:885mm D:390mm H:905mm Mobile Storage Rack 36 Tub comes flat packed W:885mm D:390mm H:1695mm Mobile Storage Rack 72 Tub comes flat packed W:885mm D:390mm H:1695mm Small Tub 150mm to Suit KK7106, KK7107, KK7108 Medium Tub 190mm to Suit KK7106, KK7107, KK7108 Large Tub 225mm to Suit KK7106, KK7107, KK7108

Plastic Storage & Multi Storage Item No.

KK7120 KK7190 KK7603 KK7604 KK7602 KK7607 KK7608 KK7609 KK7610 K07031 K07033

DescriPtion

Cargo Case 1200mm Plastic moulded heavy duty box, UV stabilised and impact resistant W:1200mm D:566mm H:435mm Cargo Case 900mm Plastic moulded heavy duty box, UV stabilised and impact resistant W:900mm D:470mm H:435mm Multi Storage Case 23 Compartment includes metal powder coated case with foam padded internal lid and 23 removeable colour coded storage containers Multi Storage Case 46 Compartment includes metal powder coated case with foam padded internal lid and 46 removeable colour coded storage containers Multi Storage Case 9 Compartment includes metal powder coated case with foam padded internal lid and 9 removeable colour coded storage containers Small Orange Container to Suit Multi Storage Cases Medium Yellow Container to Suit Multi Storage Cases Large Blue Container to Suit Multi Storage Cases Extra Large Green Container to Suit Multi Storage Cases Plastic Organiser Small with 21 dividers W:312mm D:238mm H:51mm Plastic Organiser Medium W:378mm D:290mm H:61mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

116

TOOL BOXES & STORAGE

PLASTIC STORAGE & MULTI STORAGE, SOFT STORAGE & SPARES

Item No.

DescriPtion

KINCROME

TOOL BOXES & STORAGE

K07032 K07041

Plastic Organiser Large with 21 dividers W:460mm D:350mm H:81mm Plastic Tool Box Small includes lift out tray W:356mm D:192mm H:150mm Plastic Tool Box Medium includes lift out tray and 2 small parts organisers on lid W:400mm K07045 D:217mm H:166mm K07042 Plastic Tool Box Large includes lift out tray W:580mm D:258mm H:255mm Plastic Tool Box Extra Large includes lift out tray, organiser in lid and Bonus 20 compartment lift K07043 out W:580mm D:290mm H:290mm Power Tool Case made from PP recyclable plastic and includes organiser which stores in lid K07055 W:385mm D:330mm H:130mm K51010 Safe Case Small W:210mm D:167mm H:90mm K51011 Safe Case Medium W:330mm D:280mm H:120mm K51012 Safe Case Large W:430mm D:380mm H:154mm K51019 Safe Case Extra Large W:515mm D:415mm H:200mm Note: Safe Cases are Water Tight, Vibration Proof, Dust Proof, Shock Proof, Light Weight, Stackable, Chemical Resistant, Corrosion Proof, Super Strong Latches, Marine Yellow Colour, Fully Lockable for added security, Manufactured from ultra high impact structural polymer, Includes a purge valve for quick equalisation KK7606 Storage Container Black 13 Compartment KK7605 Storage Container Black 18 Compartment K03645 Storage Container Clear 4 Compartments W:200mm D:146mm H:50mm K03540 Storage Container Clear 15 Compartments W:200mm D:92mm H:28mm K03640 Storage Container Clear 20 Compartments W:242mm D:155mm H:40mm Storage Container Set Clear 3 Piece includes 3 containers 58 x 88 x 25mm (1 of each: 1 K01061 compartment, 4 compartments, 6 compartments) Soft Storage

KK7020 KK7008 KK070052 KK7009 KK7024 KK7003 KK7004 KK7005 KK7001 KK7006 KK7007

All Weather Bag Heavy Duty 7 Pocket W:550mm D:300mm H:300mm Bucket Bag 27 Pocket Heavy Duty W:410mm D:220mm H:260mm Heavy Duty Tool Bag 14 Pocket W:600mm D:260mm H:260mm Heavy Duty Tool Bag 16 Pocket W:440 D:250 H:360mm Mobile Utility Bag 14 Pocket W:700mm D:350mm H:320mm Tool Bag 21 Pocket W:490mm D:250mm H:280mm Tool Bag 34 Pocket W:320mm D:260mm H:430mm Tool Belt 17 Pocket fits waist 34" to 52" Tool Caddy 12 Pocket W:420mm D:220mm H:260mm Tool Carry Bag Extra Large 20 Pocket Heavy Duty W:510mm D:230mm H:300mm Tool Carry Bag Large 20 Pocket Heavy Duty W:410mm D:220mm H:260mm

Spares

KK070033 KK070034 KK7260 KK7262 KK7204 KK7206 KK7205 KK7253 KK7252 KK7251 KK7250 KK7210 KK7211 KK7211 KK7212 KK7214

Ball Bearing Slide 45mm W x 14" L Ball Bearing Slide 45mm W x 16" L Ball Bearing Slide to Suit Series 1 KK070006 Ball Bearing Slide to Suit Series 1 KK070055 Ball Bearing Slides Series 3 Ball Bearing Slides to Suit KK7050, KK7064, KK7065, KK7067, KK7075 Ball Bearing Slides to Suit KK7051, KK7053, KK7070, KK7080 Castor to Suit Blue Steel Series 26" - 41" Fixed Castor to Suit Blue Steel Series 26" - 41" Swivel Castor to Suit Series 1 Fixed Castor to Suit Series 1 Swivel Gas Strut 238mm to Suit KK7766 Gas Strut 238mm to Suit KK7768, KK7769 Gas Strut 238mm to Suit KK7768, KK7769 Gas Strut 289mm to Suit KK7755 Gas Strut 425mm to Suit KK7760

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

117

tool boxes & storage

DescriPtion

KK7215 KK7216 K51016STRUT KK7213 KK7271 KK7272 KK7217 KK7218 KK7261 KK7207 KK7207S KK7208 KK7209 KK070019 KK070020 KK070021

Gas Strut 425mm to Suit KK7770 Gas Strut 425mm to Suit KK7780 Gas Strut to Suit K51016, K51020, K51220 Gas Strut to Suit K51035 Gas Strut to Suit K51036, K51037 Gas Strut to Suit K51038, K51039 Oval Trolley Handle to Suit KK7750, KK7764, KK7765, KK7767 Side Handle to Suit KK7755, KK7760, KK7763, KK7766, KK7768, KK7769, KK7770, KK7780 Slides to Suit Series 1 KK070004, KK070005, KK070009 Trolley Castor 5" x 1-1/4" to Suit KK7064, KK7067 Fixed Trolley Castor 5" x 1-1/4" to Suit KK7064, KK7067 Swivel Trolley Castor 5" x 2" to Suit KK7065, KK7075, KK7085 Trolley Castor 5" x 2" to Suit KK7085 Wheel 5" x 1-1/4" to Suit Series 1 Fixed Wheel 5" x 1-1/4" to Suit Series 1 Swivel Wheel Straight to Suit K51073, K51074

MATTING & DRAWER LINERS

KK7025 KK070013 KK070014 K07021

Drawer Liner 1000L x 570W, 2.5mm thick embossed polythene matting suitable for tool box drawer liners, workshop benches etc Rubber Matting 26" Protective rubber mat for Tool Trolleys Rubber Matting 41" Protective rubber mat for Tool Trolleys Silicone Matting 52" x 22.5" suitable for use with Kincrome range of tool boxes and tool trolleys

Spares - Locks & Keys

K51016KEY KK7200 KK7203 KK7202 KK7201 KLOCK32 KLOCK40 KLOCK27 KLOCK20 KLOCK3 K51016LOCK KLOCK21 KLOCK22 KLOCK5 KLOCK4 KLOCK71 KLOCK25 KLOCK24 KLOCK23 KK7219 KK7220 KK7230 KK7231 KLOCK45

Key to Suit K51016, K51020, K51220 Keys Only to Suit Series 3 Tool Boxes Lock & Keys to Suit K7750, KK7753, KK7763, KK7764, KK7765, KK7767 Lock & Keys to Suit KK7750, KK7751, KK7764, KK7768, KK7769, KK7770 Lock & Keys to Suit KK7755, KK7766 Lock Hook to Suit KP7009 Trolley Lock T-Handle to Suit Aluminium Range Lock to Suit K3043 Lock to Suit K51008, K51009, KS7030 Lock to Suit K51015, K3004, K51064 Lock to Suit K51016, K51020, K51220 (With 2 Keys) Lock to Suit K51033 Lock to Suit K51034, K51035 Lock to Suit K51063, K51064, K51065, K51067 Lock to Suit K51066, K51068, K51069, K3046 Lock to Suit K51071, K51074, K51090, KK070039, KK070041 Lock to Suit K51082 Lock to Suit KK070038, KK070039, KK070049, KK070078 Lock to Suit KK070039, KK070040 Lock to Suit KK7060, KK7050 Lock to Suit KK7069, KK7068 Lock to Suit KK7300, KK7302 Lock to Suit KK7301, KK7303 Lock WP Black to Suit K51037

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

Item No.

tool boxes & storage

Spares - LOCKS & KEYS

118

automotive automotive tools

Item No.

DescriPtion

AUTOMOTIVE

KINCROME

Spares - Lock & Keys Series 1

KK7267 KK7266 KK7268 KK7269

Lock & Key to Suit Series 1 KK070004 Lock & Key to Suit Series 1 KK070005, KK070006 Lock & Key to Suit Series 1 KK070009, KK070056, KK070057 Lock & Key to Suit Series 1 KK070055

Automotive tools Item No.

DescriPtion

KK080011 KK080012 KK080013 KK08086 K08085 K08104 K40022 K08055 K08051 KK8090 K08103 K04101 KWT042

4WD Axle Nut Socket 1/2" Drive 30mm (1-3/16") 4WD Axle Nut Socket 1/2" Drive 32mm (1-17/64") 4WD Axle Nut Socket 1/2" Drive 36mm (1-27/64") Adjustable Ignition Spark Tester Angular Torque Gauge 1/2" Drive Battery & Alternator Analyser 12V Brake Adjusting Tool 180mm, adjusts "screw" and "star" type adjusters on drum brake vehicles Brake Bleeder Kit 'One Man' everything needed to quickly bleed brakes with no mess Brake Caliper Windback Cube Rear 3/8" Drive Caulking Gun 230mm Heavy Duty Circuit Tester 6 - 24V, Probe Length 90mm Clamps Flexible Line 2 Piece Claw Pick Up Tool 600mm Compression Tester Kit includes Compression gauge with quick release coupler, NBR hose, Extension, Straight & Angled aluminium tubes with quick release couplers Digital Multi-Meter measures up to 600 volts DC includes 9 volt replaceable battery Digital Multimeter Professional Digital Tyre Gauge Back Lit Screen Disc Brake Pad Spreader manufactured from 4.4mm thick steel and zinc plated Drain Plug Key Set 3/8" Drive 9 Piece Engine Cylinder Hone 51mm - 177mm (2" - 7") Diameter Engine Cylinder Stones (Coarse) Replacement stones for K0100 Engine Cylinder Stones (Fine) Replacement stones for K0100 Extension Mirror Telescopic Handle Length 180mm - 500mm Fully Flexible Head and 40mm diameter Mirror Feeler Gauge 32 Blade Length 105mm Fender Cover 700mm x 600mm Gasket Scraper 280mm Hose Pincher Set 2 Piece Infrared Thermometer Non Contact Inspection Mirror Extendable with LED Light Inspection Mirror Flexible Shaft 470mm Magnetic Telescopic Pickup Tool Flexible Shaft 560mm Mechanics Stethoscope, Probe Length 290mm Mini Tube Cutter Motorbike Tyre Lever Set 2 Piece 260mm Noid Light Set 6 Piece includes GM PFI, BOSCH PFI, FORD TBI, GEO TBI, GM TBI, GM SCPI Offset Feeler Gauge 12 Blade Length 100mm

K08109 K08101 KK8014 KK8065 K08062 K08064 K0100 K0100C K0100F KWT045 K412092 K08002 KK080016 KK080019 KK8006 KK8049 K08032 K08033 KK080023 KK080015 KK8064 K08116 KK080007

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

$16.15 $12.82 $14.26 $22.99

119

automotive automotive tools,

DescriPtion

KK080005 KK080004 KK080003 KK080002 K08083 KK8017 KK080018 KK8061 KK8003 KK8060 K70044 K70042 K08060 K08049 KSR101 K08081 K08082

Oil Filter Strap Wrench Nylon to Suit filters up to 150mm diameter Oil Filter Wrench 2 Way 3 Jaw to Suit filters 65mm - 120mm diameter Oil Filter Wrench Medium to Suit filters 87mm - 95mm diameter Oil Filter Wrench Small to Suit filters 73mm - 83mm diameter Over Head Valve Spring Compressor Panel Removal Set 6 Piece Parts Washer Brush 260mm Pick Up Tool Magnetic 5 LED Length 150 - 520mm will pick up weights to 450g Pick Up Tool Magnetic 5 LED Length 150mm - 520mm will pick up weights to 450gm Pick Up Tool Magnetic 6 LED Length 170mm - 680mm will pick up weights to 1.35Kg Pick Up Tool Magnetic Telescopic Length 140mm - 650mm will pick up weights to 2Kg Pick Up Tool Magnetic Telescopic Length 90mm - 470mm will pick up weights to 300gm Seal Puller 325mm (13") Slide Hammer Kit (5 Lbs) 9 Piece Stud Extractor Tie Rod End & Pitman Arm Puller, jaw opening width 27mm, pull travel 54mm Tube Bender Heavy Duty Tyre Repair Kit 52 Piece, 15 minute repair time, On Vehicle Repair - no need to raise the vehicle or remove the wheel, can be used if vehicle is on an incline Universal Bearing Packer 125mm Diameter Universal Clutch Aligning Kit 17 Piece Universal Clutch Aligning Tool 7 Piece Weather Strip Remover 170mm Window Scraper

KK8066 K08061 K08056 KK080014 KK8018 KK8019 Creepers & Seats

K08010 K08010C K08011 K08011C KK120002 KK120005 KK120020 KK8110 KK8111 KK8111C

Mechanics Creeper, Heavy Duty Construction, 110Kg Capacity Castor to Suit K08010 Mechanics Creeper Seat 130Kg Capacity Castor to Suit K08011 Pneumatic Stool Nickel Plated Garage Stool Double Ring chrome plated with swivel padded seat 350mm diameter x 85mm thick Aluminium Anodized Creeper Lightweight 44" 135Kg Capacity Pneumatic Garage Stool chrome plated steel, padded adjustable back rest 5 Wheel Garage Creeper 110Kg Capacity Castor to Suit KK8111

Mechanics Gloves

KK080024 KK080025 KK080026 KK080035 KK080036 KK080037 KK8224 KK8225 KK8226 KK8324 KK8325 KK8326

Mechanics Gloves Medium Mechanics Gloves Large Mechanics Gloves Extra Large Extreme Gloves Medium Extreme Gloves Large Extreme Gloves Extra Large Silicon Palm Gloves Medium Silicon Palm Gloves Large Silicon Palm Gloves Extra Large Knuckle Gloves Medium Knuckle Gloves Large Knuckle Gloves Extra Large

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

AUTOMOTIVE

Item No.

KINCROME

creepers, seats & mechanic gloves

120

AUTOMOTIVE / striking & prying PARTS TRAYS, torque wrenches, chisels & pry bars

KINCROME

AUTOMOTIVE / striking & prying

Item No.

DescriPtion

Parts Trays

KK8070 KK8071 KK8072 KK8073 KK8074

Magnetic Parts Tray 150mm Round Twin Magnetic Parts Tray Triple Magnetic Parts Tray 360mm x 160mm Quad Magnetic Parts Tray 290mm x 270mm Magnetic Parts Strainer 280mm Round Mesh Bowl

Torque Wrenches & Accessories

KK8030 KK8030-1 KK8030-2 KK8031 KK8031-1 KK8031-2 KK8034 KK8034-1 KK8034-2 KMTW150F KMTW200I KMTW80F

Deflect Beam Torque Wrench 1/2" Drive Trip Kit to Suit KK8030 Wedge Assembly Kit to Suit KK8030 Deflect Beam Torque Wrench 3/8" Drive Trip Kit to Suit KK8031 Wedge Assembly Kit to Suit KK8031 Deflect Beam Torque Wrench 3/4" Drive Trip Kit to Suit KK8034 Wedge Assembly Kit to Suit KK8034 Micrometer Torque Wrench 1/2" Drive 10 - 150 Ft/lb, 13.60 - 203.50 Nm Micrometer Torque Wrench 1/4" Drive 17.7 - 212.4 Inch/lb, 2.0 - 24.0 Nm Micrometer Torque Wrench 3/8" Drive 5- 80 Ft/lb, 6.8 - 108.5 Nm

Chisels & Pry Bars Item No.

DescriPtion

K07118 KACP KK090001 KK9000 KK9001 KK9002 KK9003 KK9004 KK9005 KK9006 KK9007 KK9008 KK9009 KK9010

Podgy Bar Automatic Centre Punch Pry Bar Set 4 Piece includes 200mm, 300mm, 450mm, 600mm Blades tempered and hardened Wood Chisel 6mm Buck Bros Wood Chisel 10mm Buck Bros Wood Chisel 13mm Buck Bros Wood Chisel 16mm Buck Bros Wood Chisel 19mm Buck Bros Wood Chisel 25mm Buck Bros Wood Chisel 32mm Buck Bros Wood Chisel 38mm Buck Bros Wood Chisel 50mm Buck Bros Wood Chisel 3 Piece Set Buck Bros Wood Carving 5 Piece Set Buck Bros Pry Bar Set 4 Piece includes Extended Pry Bar 600mm, Elbow Bent Pry Bar 450mm, Bent Forked Pry Bar 300mm, Bent Pry Bar 200mm Cr-V Steel with phosphate finish Pry Bar Set 2 Piece includes Extended Bent Pry Bar 450mm, Bent Pry Bar 200mm Cr-V Steel with phosphate finish

KK9050 KK9051 Merchandising

KK9011

Merchandiser - Wood Chisel Buck Bros 11 Piece

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

121

STRiking / prying

DescriPtion

KCCP2 KCCP3 KCCP4 KCCP5 KCCP6 KCCP500 KCGC70 KCCP65 KCCP8 KCCP10 KCCP12 KCPS104 KCPS204

Centre Punch Round 1.5mm Centre Punch Round 2.5mm Centre Punch Round 3mm Centre Punch Round 4mm Centre Punch Round 5mm Centre Punch Round 5mm Heavy Duty Centre Punch Round 5mm Industrial Centre Punch Round 6.5mm Centre Punch Round 8mm Centre Punch Round 10mm Centre Punch Round 12mm Centre Punch Set Round 4 Piece includes: 1.5mm, 2.5mm, 3mm, 4mm Centre Punch Set Round 4 Piece includes: 6.5mm, 8mm, 10mm, 12mm Cold Chisel & Punch Set 6 Piece includes: Cold Chisels 16mm, 19mm, Starter Drift 6.5mm, Pin Punches 3mm, 5mm, Centre Punch 5mm Cold Chisel Hexagonal 10mm Cold Chisel Hexagonal 12mm Cold Chisel Hexagonal 16mm Cold Chisel Hexagonal 19mm Cold Chisel Hexagonal 22mm Cold Chisel Hexagonal 25mm Cold Chisel Set Hexagonal 3 Piece includes: 12mm, 19mm, 25mm Cold Chisel Set Hexagonal 5 Piece includes: 12mm, 16mm, 19mm, 22mm, 25mm Combination Pin Punch Set Short & Long 9 Piece includes: 1.8mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6.5mm Combination Punch Set 10 Piece includes: Centre Punches 3mm, 4mm, 5mm, 6.5mm, Long Pin Punches 3mm, 4mm, 5mm, 6.5mm, Starter Drift Punches 3mm, 6.5mm Combination Punch Set 5 Piece includes: Nail Punch 2.5mm, Centre Punch 3mm, Piercing Punch 5mm, Short Pin Punch 3mm, Hollow Punch 3mm Combination Punch Set 7 Piece includes: Centre Punches 8mm, 10mm, Long Pin Punches 6.5mm, 8mm, 9.5mm, Starter Drift Punches 8mm, 9.5mm Hollow Punch 3mm Hollow Punch 4mm Hollow Punch 5mm Hollow Punch 6.5mm Hollow Punch 8mm Hollow Punch 9.5mm Hollow Punch 12mm Hollow Punch 13mm Hollow Punch Set 6 Piece includes: 5mm, 6.5mm, 8mm, 9.5mm, 12mm, 13mm Hollow Punch Set 6 Piece includes: 1.5mm, 3mm, 5mm, 6.5mm, 8mm, 9.5mm Nail Punch Round 1.5mm Nail Punch Round 2.5mm Nail Punch Round 3mm Nail Punch Round 4mm Nail Punch Round 5mm

KPCS960 KCCH861 KCCH862 KCCH863 KCCH864 KCCH865 KCCH866 KCCS830 KCCS850 KSPS109 KLPS110 KCS460 KLPS107 KCHP704 KCHP705 KCHP706 KCHP708 KCHP710 KCHP712 KCHP714 KCHP716 KHPS700 KHPS701 KCNP52 KCNP53 KCNP54 KCNP55 KCNP56

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

FINKAL

Item No.

STRIKING / PRYING

FINKAL

122

STRIKING / PRYING FINKAL

Item No.

DescriPtion

KINCROME

STRIKING / PRYING

FINKAL CONTINUED

KCNP200 Nail Punch Round 5mm Floor Punch KCNP570 Nail Punch Round 5mm Heavy Duty KNPS205 Nail Punch Set Round 5 Piece includes: 1.5mm, 2.5mm, 3mm, 4mm, 5mm KCLP303 Pin Punch Long 2.5mm KCLP304 Pin Punch Long 3mm KCLP305 Pin Punch Long 4mm KCLP306 Pin Punch Long 5mm KCLP307 Pin Punch Long 5.5mm KCLP308 Pin Punch Long 6.5mm KCLP309 Pin Punch Long 8mm KCLP310 Pin Punch Long 9.5mm KLPS108 Pin Punch Set Long 8 Piece includes: 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6.5mm, 8mm, 9.5mm KCSP102 Pin Punch Short 1.8mm KCSP103 Pin Punch Short 2.5mm KCSP104 Pin Punch Short 3mm KCSP105 Pin Punch Short 4mm KCSP106 Pin Punch Short 5mm KCSP107 Pin Punch Short 5.5mm KCSP108 Pin Punch Short 6.5mm KSPS107 Pin Punch Set Short 7 Piece includes: 1.8mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6.5mm KCRP58 Roofing Punch Round 8mm KDP902 Starter Drift Punch 114 x 9 x 1.5mm KDP904 Starter Drift Punch 133 x 10 x 3mm KDP908 Starter Drift Punch 164 x 13 x 6.5mm KSDP901 Starter Drift Punch Set 6 Piece includes: 1.5mm, 3mm, 5mm, 6.5mm, 8mm, 9.5mm Note: Individual Punches are supplied in a Cylinder Pack, Individual Cold Chisels are supplied in a PVC Pouch, Sets are supplied in a Wallet

FINKAP Item No.

DescriPtion

KF1000 KF1001 KF1002 KF1003 KF1004 KF1010 KF1005 KF1006 KF1007 KF1008 KF1009 KF1019 KF1025 KF1032 KF1038 KF1050

Finkap Cold Chisel 12mm Finkap Cold Chisel 16mm Finkap Cold Chisel 19mm Finkap Cold Chisel 22mm Finkap Cold Chisel 25mm Finkap Cold Chisel Set 5 Piece includes: 12mm, 16mm, 19mm, 22mm, 25mm Finkap Masons Bolster 50mm Finkap Electrician Bolster 60mm Finkap Brick Bolster 75mm Finkap Brick Bolster 100mm Finkap Plug Chisel 6.35mm Finkap Wood Chisel 19mm Finkap Wood Chisel 25mm Finkap Wood Chisel 32mm Finkap Wood Chisel 38mm Finkap Wood Chisel 50mm Finkap Wood Chisel Set 7 Piece includes: 5 x Wood Chisels 19mm, 25mm, 32mm, 38mm, 50mm, 2 x Sharpening Hones Safety Nail Punch L:220mm W:35mm H105mm

KF1011 KF2000

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

123

STRIKING / PRYING hammers & stamp sets

Item No.

DescriPtion

Ball Pein Hammer Hickory Handle 16oz (454gm) Ball Pein Hammer Hickory Handle 24oz (680gm) Ball Pein Hammer Hickory Handle 32oz (907gm) Ball Pein Hammer Hickory Handle 8oz (227gm) Claw Hammer Hickory Handle 20oz (567gm) Length: 345mm Claw Hammer Leather Handle 16oz (454gm) Claw Hammer Leather Handle 20oz (567gm) Claw Hammer Leather Handle 24oz (680gm) Club Hammer Hickory Handle 3lb (1.35Kg) Handle 265mm Club Hammer Hickory Handle 4lb (1.8Kg) Handle 275mm Club Hammer Hickory Handle Long Handle 4lb (1.8Kg) Handle 450mm Dead Blow Hammer 40mm Nylon filled with Shot Dead Blow Hammer 60mm Nylon filled with Shot Soft Face Hammer 25mm Nylon Soft Face Hammer 25mm Polythene Soft Face Hammer 25mm Polythene / Nylon Soft Face Hammer 38mm Nylon Soft Face Hammer 38mm Polythene Soft Face Hammer 38mm Polythene / Nylon Soft Face Hammer 50mm Nylon Soft Face Hammer 50mm Polythene Soft Face Hammer 50mm Polythene / Nylon

REPLACEMENT HEADS

KK9026 KK9028 KK9030 KK9027 KK9029 KK9031

Replacement Nylon Heads 2 x 25mm Replacement Nylon Heads 2 x 38mm Replacement Nylon Heads 2 x 50mm Replacement Polythene Heads 2 x 25mm Replacement Polythene Heads 2 x 38mm Replacement Polythene Heads 2 x 50mm

Stamp Sets

KK9136

Letter & Number Stamp Set 36 Piece, 6mm Letters and Numbers, 10mm Square Shank

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

KK090006 KK090007 KK090008 KK090005 KK9101 KK9032 KK9033 KK9034 KK090009 KK090011 KK090012 KK9024 KK9025 KK9016 KK9015 KK9017 KK9019 KK9018 KK9020 KK9022 KK9021 KK9023

STRIKING / PRYING

Hammers

124

Lighting & Electrical LED Torches, Pen Lights & worklights

KINCROME

LIGHTING & ELECTRICAL

LED torches & pen lights Item No.

DescriPtion

KK080034 KK10001 KK10002 KK10003 KK10004 KK10005 KK8001 KK8004 KK8026 KK8027 KK8028 KK8029 KK8059

Aluminium Torch 3D 12 LED Aluminium Torch 2AA 32 LED Aluminium Torch 3D LED Aluminium Torch Set 2 Piece includes: 1 x KK10001, 1 x KK10002 Single LED Torch 1W 3AAA Black, Single High Intensity Cree, 60 Lumens, Beam Length 100 metres Single LED Torch 3W 2D Black, Single High Intensity Cree, 110 Lumens, Beam Length 200 metres Pen Light Powerful LED Technology Mini LED Penlight Keyring with Caribiner attachment 24 LED Handheld Worklight Magnetic 24 LED Round Worklight Magnetic 60 LED Utility Light Magnetic 21 LED Light Deluxe (Round) 9 LED Torch - fits in pocket

Worklights Item No.

DescriPtion

KK8044 KK8047 KK8045 KK8046 KK8040 KK8043 KK8041 KK8042

18 LED Cordless Worklight Mini Sabre Light 30 LED Worklight 240V Sabre Light Cord Length: 5m 60 LED Cordless Worklight Sabre Light 90 LED Cordless Worklight Sabre Light Angle Worklight Fluoro with Magnetic Stand 13W Cord Length: 15m Angle WorklLight Fluoro with Magnetic Stand 26W Cord Length: 5m Compact Angle Worklight Fluoro 13W Cord Length: 5m Multi Purpose Light Fluoro 15W Cord Length: 5m

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

125

MEASURING Verniers, Micrometers,

Dial Indicators, tape measures & rulers

DescriPtion

KK11007 K64002 K64003 K64004 K64005 KK11010 KK11011 KK11018

Folding Rule 1M Metric Stainless Steel Rule 150mm (6") Stainless Steel Rule 300mm (12") Stainless Steel Rule 600mm (24") Stainless Steel Rule 1000mm (40") Tape Measure 10M Metric Tape Measure 8M / 26Ft Metric / Imperial Tape Measure 8M Metric

MEASURING

Item No.

KINCROME

Tape Measures & Rulers

Verniers, Micrometers, Dial Indicators

K5603 K5604 KK11040 K5602 K5610 K5606 K5607 K5636 K2310 K2311 K2312 KS11016 K2313 K2351 K2352 K2313B K5638

Dial Indicator 0 - 1" Imperial 0.001" Graduations Dial Indicator 0 - 10mm Metric 0.01mm Graduations Digital Disc Brake Vernier Caliper 100mm (4") Magnetic Base for use with dial gauges etc Micrometer Electronic Digital External 0 - 25mm / 0 - 1" (0.001mm / 0.0001") Micrometer External 0 - 25mm Micrometer External 25 - 50mm Telescopic Gauges 6 Piece Set Vernier Caliper 150mm (6") Vernier Caliper 200mm (8") Vernier Caliper Dial 150mm (6") Metric Vernier Caliper Digital 150mm (6") Vernier Caliper Digital 150mm (6") Vernier Caliper Digital 200mm (8") Vernier Caliper Digital 300mm (12") Replacement Battery for Digital Vernier K2313, K2351, K2352 Vernier Caliper Plastic 150mm (6")

MERCHANDISING Item No.

DescriPtion

Merchandising

K50115 K50115B

Merchandiser - Measuring Tools 12 Piece, Clear acrylic case, Free standing counter display, Key lockable Board Only to Suit K50115 Merchandiser

Bottle Jacks Item No.

DescriPtion

Bottle Jacks

KK12050 KK12051 KK12052 KK12053 KK12054 KK12055 KK12056 KK12057

Bottle Jack 1,850Kg (2 US Ton) Bottle Jack 4,000Kg (4.4 US Ton) Bottle Jack 6,000Kg (6.6 US Ton) Bottle Jack 8,000Kg (8.8 US Ton) Bottle Jack 10,000Kg (11 US Ton) Bottle Jack 12,000Kg (13 US Ton) Bottle Jack 15,000Kg (16.5 US Ton) Bottle Jack 20,000Kg (22 US Ton)

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

126

lifting & materials handling bottle jacks, chain blocks & engine stands

KINCROME

lifting & materials handling

Item No.

DescriPtion

Bottle Jacks

KK12058 KK12059

Bottle Jack 10,000Kg Squat (11 US Ton) Bottle Jack 20,000Kg Squat (22 US Ton)

Chain Blocks

KK12081 KK12082 KK12083

Chain Block 1 Tonne 3M Lift (1,000Kg) Chain Block 2 Tonne 3M Lift (2,000Kg) Chain Block 3 Tonne 3M Lift (3,000Kg)

Engine Stands

KK12040 KK12045 KK12046 KK12047 KK12085

Engine Crane Folding 1,450Kg (1.59 US Ton) Engine Stand 454Kg (0.5 US Ton) Engine Stand 566Kg (0.6 US Ton) Engine Stand 907Kg (1 US Ton) Hydraulic Pipe Bender 12 Tonne (12,000Kg)

JACK STANDS Item No.

DescriPtion

KK12070 KK12071 KK12072 KK12073 KK12074 KK12075

Jack Stands 1,350Kg (1.48 US Ton) 2 Piece Jack Stands 3,000Kg (3.3 US Ton) 2 Piece Jack Stands 5,000Kg (5.5 US Ton) 2 Piece Ratchet Jack Stands 2,000Kg (2.2 US Ton) 2 Piece Ratchet Jack Stands 3,000Kg (3.3 US Ton) 2 Piece Ratchet Jack Stands 5,000Kg (5.5 US Ton) 2 Piece

Shop presses

KK12090 KK12091 KK12092

Shop Press 6 Tonne (6,000Kg) Shop Press 12 Tonne (12,000Kg) Shop Press 20 Tonne (20,000Kg)

trolley jacks

KK12060 KK12061 KK12062 KK12063 KK12064 KK12065 KK12066 KK12068 KK12069

Trolley Jack 1,350Kg (1.48 US Ton) Hydraulic Trolley Jack 1,800Kg (1.98 US Ton) Hydraulic Trolley Jack 2,000Kg (2.2 US Ton) Hydraulic Trolley Jack 1,000Kg (1.1 US Ton) Hydraulic Aluminium Trolley Jack 3,500Kg (3.85 US Ton) Hydraulic Low Profile Trolley Jack 5,000Kg (5.5 US Ton) Hydraulic Truck Jack Trolley Jack 10,000Kg (11 US Ton) Hydraulic Truck Jack Transmission Jack 500Kg (0.55 US Ton) Hydraulic Low Profile High Lift Jack 1,050Kg (1.15 US Ton)

Vehicle Positioning Jacks

Body Repair Kit Hydraulic 15 Piece 10 Tonne Includes: Pump Unit, Pump Handle, Hydraulic Hose, Ram Unit, 4 x Extension Bars (145mm, 245mm, 345mm, 595mm), Base Plate, V Base, Rubber Head, Spreading Wedge, Cleft Cap, Plunger Toe, Ram Toe, Serrated Cap, Male Connector supplied in a blow mould case with handle and wheels KK12100 Vehicle Positioning Jack 300mm 1 Piece KK12101 Vehicle Positioning Jack 300mm 2 Piece KK12102 Vehicle Positioning Jack 300mm 5 Piece includes 4 x KK12100, 1 x KK12103 Vehicle Positioning Jack Stand with Castors holds 4 Vehicle Positioning Jacks (suits most popular KK12103 brands and models) Note: US Ton = Short Ton (907.1847Kg) Tonne = Metric Tonne (1,000Kg) KK12095

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

127

CONSTRUCTION Plate Compactors, Concrete Vibrator &

Submersible Pump, levels, saw horses, squares & measuring

Item No.

DescriPtion

Levels

KK11058 KK11051 KK11050 KK11052 KK11054 KK11053 KK11060 KK11059 KK11062 KK11061 KK11082 KK11066 KK11063

Cross Check Level Heavy Duty I-Beam Level Magnetic 1200mm I-Beam Level Magnetic 2000mm I-Beam Level Magnetic 600mm I-Box Level Magnetic 1200mm I-Box Level Magnetic 600mm Line Level Aluminium 100mm Line Level Set 2 Piece Post Level Magnetic Surface Level Torpedo Level & Pencil Set Torpedo Level Pro Cast Torpedo Level Shock Resistant

Saw Horses

KS14000 KK14110

Steel Sawhorse Brackets 2 Piece Set Heavy Duty Tradesman's Sawhorse Set includes 2 sawhorses with trade tough 35mm Hardwood Bamboo tops

Squares & Measuring

KK11074 KK11073 KK11083 KK11067 KK11068 KK11076 KK11065 KK11064 KK11075 KK11069 KK11070 KK11072 KK11071

Builders Square Steel 200 x 300mm Builders Square Steel 400 x 600mm Carpenters Pencils 12 Piece Combination Square Metric 300mm Combination Square Metric High Impact 300mm Magnetic Angle Finder Plumb Bob Brass 16oz includes 2 extra tips Plumb Bob Brass 8oz Rafter Square Aluminium Black 400 x 600mm Sliding T Bevel Hardwood Handle 230mm Sliding T Bevel High Impact Handle 200mm Try Square Hardwood Handle Try Square High Impact with level

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

construction

KK14350 Concrete Vibrator with 38mm Diameter Poker, 6M Flexible Shaft KK14300 Plate Compactor 60Kg Compaction Depth 20cm, Base Plate Size L:550mm x W:360mm KK14301 Plate Compactor 80Kg Compaction Depth 30cm, Base Plate Size L:550mm x W:490mm KK14360 Submersible Pump with 75mm Diameter Pump, 5M Flexible Shaft Note: All powered by the Honda GX160 4 Stroke 5.5Hp Motor

KINCROME

plate compactors, concrete vibrator & submersible pump

128

workshop & engineering

Drill presses, bench grinders, wet & dry power vacuums

Item No.

DescriPtion

KINCROME

workshop & engineering

Matting

KK7130

Anti-Fatigue Matting 900 x 900mm

Drill Presses & Bench Grinders

KK15300 KK15310 KK15150 KK15200 KK15250 KK15280 KK15320

Bench Drill Press Overall Height 580mm Bench Drill Press Overall Height 940mm Bench Grinder 150mm (6") LED Bench Grinder 200mm (8") LED Bench Grinder 250mm (10") Bench Grinder Stand 830mm (33") Pedestal Drill Press Overall Height 1610mm

Engraving

KK13001 KK13002

Pen Engraving Tool Diamond Tip includes 2AA batteries and storage case Engraver Diamond Spare Tip

Fans

KK13005 KK13004 KK13006 KK13003 KK13007

Floor Fan 500mm (20") 240V (50Hz) 100W Pedestal Fan 500mm (20") 240V (50Hz) 100W Pedestal Fan 750mm (30") Industrial 240V (50Hz) 250W Wall Fan 500mm (20") 240V (50Hz) 100W Wall Fan 750mm (30") 240V (50Hz) 250W

Impact Wrench

KK13070 KK130018 KK130020

Cordless Impact Wrench 19.2V 1/2" Drive complete with 1 hour cut off Battery Charger and 2 x 19.2V heavy duty Battery Packs Battery Pack 19.2V to Suit KK13070 Battery Charger 19.2V to Suit KK13070

Parts Washers & Vices

KK13080 KK13081 KK13082 KK9012 KK9013 KK9014

Parts Washer 90 Litre Parts Washer 150 Litre Parts Washer Mobile 75 Litre Swivel Base Vice 100mm (4") Swivel Base Vice 125mm (5") Swivel Base Vice 150mm (6")

wet & dry Power Vacuums

KK15020 KK15035 KK15065 KK15080 KK15020-38 KK15065-45 KK15080-50 KK15020-25

Wet & Dry Power Vacuum 20 Litre 240V / 1200W Wet & Dry Power Vacuum 30 Litre 240V / 1200W with Power Socket Wet & Dry Power Vacuum 60 Litre 240V / 1200W with Power Socket Wet & Dry Power Vacuum 80 Litre 240V / 2200W Dust Bag 5 Piece to Suit KK15020, KK15035 Dust Bag 5 Piece to Suit KK15065 Dust Bag 5 Piece to Suit KK15080 Filter to Suit KK15020

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

129

agriculture & farming

Pressure washers & spot sprayers

Item No.

DescriPtion

Plate Vice Triangle - Instantly holds materials fast and tight Timber Lok Square - Instantly holds materials fast and tight

Screw Extractor Sets, Tap & Die Sets

KK12001 K19157C KK12087 K190822 KK12025 KK12024 KK12022 KK12021

Kwik Outs Damaged Screw Remover Set 6 Piece Removes Screw No: 3 - 5, 6 - 10, 12 - 14 Bolt Sizes: 3 - 14mm or 1/8" - 9/16" Fasteners: 2 - 8 Grade Screw Extractor Set 5 Piece includes 3 - 6mm, 6 - 8mm, 8 - 11mm, 11 - 14mm, 14 - 18mm packaged in a vinyl wallet Tap & Die Engineer Set 87 Piece Tap & Die Set 110 Piece NC / NF / Metric Tap & Die Set 24 Piece Imperial Tap & Die Set 24 Piece Metric Tap & Die Set 40 Piece Imperial Tap & Die Set 40 Piece Metric

agriculture & farming Item No.

DescriPtion

Pressure Washers & parts

KK16200 KK16201 KK16202 KK16205 KK16206 KK16207 KK16208 KK16209 KK16203 KK16204

Pressure Washer 6.5Hp Pressure Washer 7Hp Pressure Washer Diesel 11Hp 8M Hose to Suit KK16200, KK16201, KK16202 20M Hose to Suit KK16200, KK16201, KK16202 5 Piece Nozzle Set to Suit KK16200, KK16201 5 Piece Nozzle Set to Suit KK16202 Gun & Lance to Suit KK16200, KK16201, KK16202 Turbo Nozzle to Suit KK16200, KK16201 Turbo Nozzle to Suit KK16202

Spot Sprayers

KK16000 12V Spot Sprayer 37 Litre KK16001 12V Spot Sprayer 60L KK16002 12V Spot Sprayer 98L Note: Kincromeâ&#x20AC;&#x2122;s range of Spot Sprayers are designed for effective spraying of herbicides and pesticides, for the control of weeds on small farms and properties. The Spot Sparayers are designed to be fitted to the back of an ATV, Ride On Mower or small vehicle which allows ease of use. All models feature a 12V pump with remote on/off switch, adjustable pattern nozzle and a polyethylene UV resistant tank. The larger 2 models also come with a broadcast lance.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

KINCROME

KK9070 KK9071

agriculture & farming

Plate Vice & Timber Lok

130

LUBRICATION & FLUID TRANSFER GREASE GUNS, grease & air tool oil

KINCROME

LUBRICATION & FLUID TRANSFER

Item No.

DescriPtion

grease guns

KK8007 KK8009 KK17175 KK8450 KK8011 KK8080 KK8013 KK8012 KK8010 KK8015

Grease Gun Double Action 8000 PSI Grease Gun Standard Pistol Grip Jiggler Hose 1.75M Lever Grease Gun 4500 PSI Lever Grease Gun 500cc Mini Grease Gun 80cc Oil Can Rigid Spout 420cc Pistol Oil Can Flexible Spout 170ml Suction Gun Suction Gun Double Action 500cc

Grease

KK17100 KK17101

Multi Purpose Grease Cartridge 450g Multi Purpose Grease Tub 500g

Grease Gun Accessories & Air Tool Oil

KS130209 KS130208 KK8053 KK8051 KK8055 KK8052 KK8056 KK8054 KK8057 KK8050

Air Tool Oil 500ml Compressor Oil 1 Litre Grease Coupler 1/8" BSP 4 Jaw Grease Coupler Right Angle 1/8" BSP Grease Gun Flexible Hose 300mm (12") 1/8" BSP incldes 3 Jaw Coupler Grease Gun Flexible Hose 450mm (18") 1/8" BSP includes 3 Jaw Coupler Grease Gun Holder can be mounted on a wall or tool box, holds Grease Guns with 450g barrels Grease Injector Needle 1/8" BSP Needle Nose Adaptor 100mm (4") 1/8" BSP 4 Jaw Coupler Swivel Coupler 360째 1/8" BSP

chrome tech Item No.

DescriPtion

Chrome Tech

KC010001 K306

Tool Kit 40 Piece Metric includes 13 Sockets 1/4" Drive, 3 Sockets 3/8" Drive, 8 Hex Key Wrenches, 6 Combination Spanners, Combination Plier, Multi Grip Plier, Ratchet Handle, Spark Plug Socket Set, Extension Bar, Adaptor, Spinner Handle, 3 Screwdrivers packaged in a Blow Mould Case Adjustable Wrench Set 4 Piece includes 150mm, 200mm, 250mm, 300mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

131

TOOL KITS & socketry

Item No.

DescriPtion

Tool Kit 159 Piece Imperial / Metric - includes Cantilever Tool Box Tool Kit 120 Piece Imperial / Metric - includes Metal Tool Case Wall Cabinet 300 Piece Imperial / Metric - includes Metal Wall Cabinet Tool Chest 300 Piece Imperial / Metric - includes Heavy Gauge Steel 4 Drawer Tool Chest Tool Kit 174 Piece Imperial /Metric - includes Heavy Gauge Steel 5 Tray Cantilever Tool Box

SOCKET SETS

KS2010 K5523 K5518 K1004 K5521 K5522 K5524 K5541 KC020005 KC020001 KC020006 KC020004 KC020002

Impact Socket Set 10 Piece Metric 1/2" Drive Socket & Spanner Set 35 Piece Imperial / Metric 1/2" Drive Socket Set 25 Piece Imperial / Metric 1/4" Drive Socket Set 26 Piece Imperial /Metric 3/4" Drive Socket Set 40 Piece Imperial / Metric 1/4", 3/8" Drive Socket Set 42 Piece Imperial / Metric 3/8" Drive Socket Set 43 Piece Imperial / Metric 1/2" Drive Socket Set 62 Piece Imperial / Metric 1/4", 3/8", 1/2" Drive Socket Set 24 Piece Imperial / Metric 1/2" Drive Socket Set 40 Piece Imperial / Metric 1/4", 3/8" Drive Socket Set 43 Piece Imperial / Metric 1/2" Drive Socket Set 44 Piece Imperial / Metric 3/8" Drive Socket Set 51 Piece Imperial / Metric 1/4", 3/8", 1/2" Drive

SOCKET ACCESSORIES

K1055 K1063 K1064 K1062 K1059 K1046 K1060 K1070 K1066 K1067 K1058 K1065 K1044 K1072 K1081 K1053 K1052 K1045 K1056 K1057 K1089 K1047 K1010 K1012 K1011 K1068 K1069

Adaptor 1/2" Male x 3/8" Female Extension Bar 1/2" Drive 125mm Extension Bar 1/2" Drive 250mm Extension Bar 1/2" Drive 75mm Flexible Handle 1/2" Drive 375mm Ratchet Handle Quick Release 1/2" Drive 250mm 48 Teeth Ratchet Handle with Spin Disc 1/2" Drive 250mm 43 Teeth Sliding T-Handle 1/2" Drive 250mm Spark Plug Socket 1/2" Drive 16mm Spark Plug Socket 1/2" Drive 21mm Speed Brace 1/2" Drive 400mm Universal Joint 1/2" Drive Ratchet Handle Quick Release 1/4" Drive 150mm 48 Teeth Adaptor 3/4" Male x 1/2" Female Adaptor 3/8" Male x 1/2" Female Extension Bar 3/8" Drive 150mm Extension Bar 3/8" Drive 75mm Ratchet Handle Quick Release 3/8" Drive 200mm 48 Teeth Spark Plug Socket 3/8" Drive 16mm Spark Plug Socket 3/8" Drive 21mm Tune Up Kit 4 Piece 3/8" Drive - includes Ratchet Handle, Extension 150mm, 2 x Spark Plug Sockets Universal Joint 3/8" Drive Socket Rail 1/2" Drive - takes up to 15 sockets Socket Rail 1/4" Drive - takes up to 15 sockets Socket Rail 3/8" Drive- takes up to 15 sockets T-Handle Spark Plug Socket 16mm T-Handle Spark Plug Socket 21mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUPATOOL

KS010018 KS010020 KS010029 KS010030 KS1174

TOOL KITS & socketry

TOOL KITS

132

SUPATOOL

spanner sets, pliers & wrenches

Item No.

DescriPtion

SPANNER SETS

KS030006 KS030005 K112 K1160 K113 KS3027 K1131C K1136 K1130C K1135 KS030010 KS030009 K1112 K1113 KS3026 KS3020 KS3021 KS3022 KS3023 KS3024 KS3025 K1115 K1114 KS030008 KS030007 K1170 K1171

Combination Gear Spanner Set 7 Piece Imperial Combination Gear Spanner Set 7 Piece Metric Combination Spanner Set 11 Piece Metric Combination Spanner Set 22 Piece Imperial / Metric - includes vinyl storage wallet Combination Spanner Set 24 Piece Imperial / Metric Combination Spanner Set 47 Piece Imperial / Metric - includes vinyl storage wallet Combination Spanner Set 5 Piece Imperial Combination Spanner Set 5 Piece Imperial Combination Spanner Set 5 Piece Metric Combination Spanner Set 5 Piece Metric Combination Spanner Set 9 Piece Imperial - includes plastic storage tray Combination Spanner Set 9 Piece Metric - includes plastic storage tray Flare Nut Spanner Set 3 Piece Imperial Flare Nut Spanner Set 3 Piece Metric Jumbo Spanner Set 10 Piece Metric Jumbo Spanner Set 4 Piece Imperial Jumbo Spanner Set 4 Piece Metric Jumbo Spanner Set 6 Piece Imperial Jumbo Spanner Set 6 Piece Metric Jumbo Spanner Set 9 Piece Imperial Jumbo Spanner Set 9 Piece Metric Ratchet Ring Spanner Set 5 Piece Imperial Ratchet Ring Spanner Set 5 Piece Metric Stubby Combination Gear Spanner Set 7 Piece Imperial Stubby Combination Gear Spanner Set 7 Piece Metric Stubby Combination Spanner Set 10 Piece Metric Stubby Combination Spanner Set 8 Piece Imperial

Pliers & Wrenches

K5102 K5103 K5104 K5105 K1615 KS4000 K5106 K2005 K5026 K5055 K5046 K5001 K5002 K5010 K5011 K5012 K5025 K5006 K5007

Adjustable Wrench 150mm (6") Adjustable Wrench 200mm (8") Adjustable Wrench 250mm (10") Adjustable Wrench 300mm (12") Adjustable Leather Punch Hand Riveter 250mm (10") - includes 4 Tips and 60 assorted rivets Adjustable Wrench Set 3 Piece Crimping Tool Set - includes terminals Lock Grip Plier Set 3 Piece - includes 125, 175, 250mm Mini Plier Set 5 Piece 150mm (6") Plier Set 5 Piece - includes Multi Grip, Lock Grip, Slip Joint, Long Nose & Diagonal Cuttong Pliers Combination Plier 175mm (7") Combination Plier 200mm (8") Diagonal Cutting Plier 150mm (6") Diagonal Cutting Plier 175mm (7") End Nipper Plier 175mm (7") Locking Plier 250mm (10") Long Nose Plier 150mm (6") Long Nose Plier 200mm (8")

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

133

DescriPtion

K5020 K5015

Multi Grip Plier 250mm (10") Slip Joint Plier 200mm (8")

Screwdrivers & Fastening

K1508 K1515 K1528 K1529 K2111 K5313 KS050001 KS050002 KS050005 KS5030

Screwdriver & Bit Set with Telescopic Magnet Pickup Tool 8 Piece Screwdriver Set 6 Piece - includes wall bracket Screwdriver Set 8 Piece - includes plastic carry case Screwdriver Set 13 Piece - includes plastic carry case Hex Key Set 25 Piece Precision Screwdriver Set 11 Piece - includes plastic case Screwdriver & Bit Set Set 21 Piece Electrical Repair Tool Kit 125 Piece - Insulated up to 1000v AC & 1500v DC Go Through Screwdriver Set 10 Piece - includes plastic carry case Hex Key Wrench Set 30 Piece - includes plastic storage case

Cut / Scrape / Saw

K1413 K1414 K1432 K1703 K1704 KS060032 KS6016 KS6017

Utility Knife Fluoro Utility Knife Merchandiser 24 Piece Hacksaw Heavy Duty Wire Brush Set Small 3 Piece Wire Brush Set Medium 3 Piece Plastic Retractable Cutting Knife Merchandiser 9mm 24 Piece Needle File Set 6 Piece Plastering Trowel 300 x 100mm

Tool Boxes

K3046 K3049 K3047

Tool Chest 6 Drawer Friction Slide Tool Chest 9 Drawer Friction Slide Tool Trolley 7 Drawer Friction Slide

automotive

K1430 K2201 K2202 K2203 K2207 K2208 K2209 K2210 K2217 K2219 K2230 K2401 K2806 K4113 K5662 K5692 K5755 KS080013 KS8020

Wheel Brace 4 Way Harmonic Balancer Puller 13 Piece Piston Ring Compressor Coil Spring Compressor Valve Spring Compressor Ball Joint Separator Tie Rod End Separator Ball Joint Remover Heavy Duty Lever Type Steering Wheel Puller Oil Filter Wrench Adjustable Hand Puller 2,000 Kg Circuit Tester 6-12 Volt Hand Grease Gun 500CC Circuit Tester 6, 12, 24 Volt Feeler Gauge 32 Blade Ratchet Tie Down Heavy Duty Adjustable Torque Wrench 1/2" Drive 10-150Ft/Lb, 30-210Nm Extension Wheel Nut Wrench Creeper Set 2 Piece

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUPATOOL

Item No.

SCREWDRIVERS, CUTTING BOXES ETC

screwdrivers, cutting, tool boxes & automotive

134

SUPATOOL

STRIKING, PRYING, AIR TOOLS & ACC

striking, prying, air tools & accessories

Item No.

DescriPtion

Striking / Prying

K09012 K09018 K09024 K09036 K1736 K1751

Wrecking Bar 300mm Wrecking Bar 450mm Wrecking Bar 600mm Wrecking Bar 900mm Rubber Mallet 910gm (32oz) Claw Hammer 560gm (20oz)

Air ToolS

KP13012 KS130090 KS130100 KS130107 KS130108 KS130110 KS130118 KS130161 KS130162 KS130164 KS130165 KS130167 KS130168 KS130169 KS130171 KS130187 KS130188 KS130189 KS130190 KS130191 KS130192 KS130193 KS130194 KS13030

Air Compressor 150PSI 12 Volt Coiler Nailer 32 - 65mm Air Compressor Mini 12 Volt Air Compressor 2.5HP 50 Litre Cast Iron Tyre Inflator 3-In-1 plus Gauge Air Blow Gun Filter / Regulator 1/4" Air Tool Set 3 Piece Air Tool Set 4 Piece Air Accessory Set 14 Piece Air Accessory Set 20 Piece Air Stapler Kit Mini Tacker C1 Bradder Kit Nail Gun C Bradder Kit Framing Gun Kit Air Impact Wrench Kit 1/2" Drive Air Tool Reverse Drill 10mm Air Tool Sand Blaster Set Air Tool Engine Cleaning Gun Air Hammer Set includes 4 Chisels Air Tool Die Grinder Kit 1/4" Drive Air Tool Ratchet 3/8" Drive Air Tool Sander Dual Action Air Compressor 2.5HP 30 Litre

Air Tool Accessories

KS130113 KS130114 KS130120 KS130151 KS130152 KS130153 KS130155 KS130156 KS130157 KS130158 KS130160 KS130205 KS130206 KS130208 KS130209 KS130320

Mini Inline Moister Trap Retractable Air Hose 10M Hose Repair Kit 5 Piece Recoil Air Hose Nitto Fitting Heavy Duty 15M Air Hose Nitto Fitting 15M x 10mm Air Hose Nitto Fitting 30M x 10mm Spray Gun High Pressure Spray Gun Low Pressure Spray Gun Gravity Fed Low Pressure Spray Gun Touch Up Air Brush Kit Air Hose Aro Fitting 15M x 10mm (NZ) Air Hose Aro Fitting 30M x 10mm (NZ) Compressor Oil 1 Litre Air Tool Oil 500ml Retractable Air Hose 20M

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

135

Air Tools & Accessories

Item No.

DescriPtion

Fastener Staples 80 Series 1000 Piece 6mm Fastener Staples 80 Series 1000 Piece 8mm Fastener Staples 80 Series 1000 Piece 10mm Fastener Staples 80 Series 1000 Piece 12mm Fastener Staples 80 Series 1000 Piece 14mm Fastener Staples 80 Series 1000 Piece 16mm Fastener Brads C1 Series 2500 Piece 10mm Fastener Brads C1 Series 2500 Piece 15mm Fastener Brads C1 Series 2500 Piece 20mm Fastener Brads C1 Series 2500 Piece 25mm Fastener Brads C1 Series 2500 Piece 32mm Fastener Brads C Series 2500 Piece 25mm Fastener Brads C Series 2500 Piece 30mm Fastener Brads C Series 2500 Piece 35mm Fastener Brads C Series 2500 Piece 50mm Framing Nail 34 Degree 1000 Piece 2.87 x 50mm Framing Nail 34 Degree 1000 Piece 3.05 x 75mm

Air Tool Fittings

KS130121 KS130122 KS130123 KS130124 KS130125 KS130126 KS130127 KS130129 KS130130 KS130131 KS130132 KS130133 KS130134 KS130201 KS130135 KS130137 KS130138 KS130195 KS130196 KS130197 KS130198 KS130199 KS130200 KS130139 KS130109 KS130141 KS130142 KS130143 KS130144 KS130145

Jamec Fitting 1/4" Female Plug Jamec Fitting 1/4" Male Plug Jamec Fitting 1/4" Female Coupler Jamec Style 1/4" Male Coupler Jamec Style Barb Plug to suit 10mm Hose Jamec Style Barb Coupler to suit 10mm Hose Nitto Style 1/4" Female Plug Nitto Style 1/4" Female Coupler Nitto Style 1/4" Male Coupler Nitto Style Barb Plug to suit 10mm Hose Nitto Style Barb Coupler to suit 10mm Hose Nitto Style Air Fitting Set 5 Piece Nitto Style 3 Way Multi-Pass Coupler High Pressure Ryco Style 1/4" Female Plug Ryco Style 1/4" Female Coupler Ryco Style Barb Plug to suit 10mm Hose Ryco Style Barb Coupler to suit 10mm Hose Aro Style 1/4" Female Plug (NZ) Aro Style 1/4" Male Plug (NZ) Aro Style 1/4" Female Coupler (NZ) Aro Style 1/4" Male Coupler (NZ) Aro Style Barb Plug to suit 10mm Hose (NZ) Aro Style Barb Coupler to suit 10mm Hose (NZ) Brass Fitting 1/4" Inline Stop Valve Brass Fitting Tyre Chuck Brass Fitting 1/4" Male to Male Adaptor Brass Fitting 3/8" Male to Male Connector Brass Fitting 1/4" Male Barb Tail for 10mm Hose Brass Fitting 1/4" Female to Female Connector Brass Fitting 3/8" Female to 1/4" Female Adaptor

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUPATOOL

KS130172 KS130173 KS130174 KS130175 KS130176 KS130177 KS130178 KS130179 KS130180 KS130181 KS130182 KS130183 KS130184 KS130185 KS130186 KS130226 KS130227

AIR TOOLS & ACCESSORIES

Air Tool Fasteners

136

Workshop & Engineering Air Tools & Accessories Item No.

DescriPtion

SUPATOOL

WORKSHOP & ENGINEERING

Air Tool Fittings continued

KS130146 KS130147 KS130148 KS130149 KS130150

Brass Fitting 1/4" Female Barb Tail for 10mm Hose Brass Fitting 1/4" Male BSP to Female NPT Adaptor Brass Fitting 1/4" Male NPT to Female BSP Adaptor Brass Fitting 1/4" Female to 3/8" Male Adaptor Brass Fitting 1/4" Male T-Connector

Workshop & Engineering

K1485 K1486 K1487 K1488 K1489 K1491 K1492 K1493 K1494 K5671 K5672 K5673 K5675 K5676

Soldering Iron Stand Soldering Wire with Flux Soldering Iron Tips 30W 3 Piece Soldering Iron Tips 60W 3 Piece Soldering Iron Tips 80W 3 Piece Soldering Iron 30W 240V Soldering Iron 60W 240V Soldering Iron 80W 240V Soldering Iron 30W 12V G Clamp 50mm (2") G Clamp 75mm (3") G Clamp 100mm (4") G Clamp 150mm (6") G Clamp 200mm (8")

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

137

LOCKING PLIERS

SELF ADJUSTING LOCKING PLIERS & SETS

Item No.

Description

Lockjaw 10" Curved Jaw 101003 Lockjaw 11" C Clamp 102000 Lockjaw 11" C Clamp with Swivel Pads Lockjaw 6" Curved Jaw 061000 Lockjaw 7" C Clamp 062007 Lockjaw 7" C Clamp with Swivel Pads Lockjaw 7" Needle Nose 093001

EXTENDED REACH C-CLAMPS

S354970070 S354970080 S354970130 S354970140

Lockjaw 19" Extended C Clamp Lockjaw 19" Extended C Clamp with Swivel Pads Lockjaw 10" Extended C Clamp Lockjaw 10" Extended C Clamp with Swivel Pads

SETS

S354970100 S354970110 S354970120 S354970170 S354970180

Lockjaw 3 Piece Set 10"C-6"C-7"N Lockjaw 2 Piece Set 10"C & 6"C Lockjaw 2 Piece Set 10"C & 7"N Lockjaw 10 & 9.1/2" Set Lockjaw 6-1/2 & 9-1/2" Set

SELF ADJUSTING GROOVE

S354970150 S354970160

6-1/2" Self Adjusting Auto-Grip Groove Plier 9-1/2" Self Adjusting Auto-Grip Groove Plier

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

LOCKJAW

S354970001 S354970010 S354970020 S354970030 S354970040 S354970050 S354970060

LOCKING PLIERS

SELF ADJUSTING LOCKING PLIERS

138

KITS & ACCESSORIES

MITYVAC

KITS & ACCESSORIES

Item No. Mityvac Kits MI4000 MI4010 MI4050 MI7000 Mityvac Accessories MI4100 MI5505 MI6000 MI6100 MI6171 MI6172 MI6895 MI6909 MI822303 MI822304

MI822386 MI822599 MI823379 MI823479 Mityvac Specialty Tools MI4505 MI5520 MI5525 MI5530 MI5910 MI7400

MI7205 MI7240 MI822405 MI5511

DESCRIPTION Silverline Automotive Kit (diecast pump) Silverline Vacuum Pump only Silverline Plus Automotive Kit Automotive Tune-Up & Brake Bleeding Kit Silverline Maintenance Kit Compression Tester 10 & 12mm Adaptor Brake Bleeding Bar Automotive Test Accessory Kit Standard Maintenance Kit Replacement Vacuum Gauge for Pumps Replacement Vacuum Gauge for Pumps - New Type Dual Convertor-Plastic Reservoir Jar Transfer and Storage Lid Brake Bleeding Adaptor Package Auto Adaptor Package Handle Kit For 7000 Hose Set 7200/7400 Silverline D/C Maintenance Kit Rubber Body For 4505 Universal Radiator Adapter Compression Test Kit 0-300 PSI Compression Tester Quick test style 0-300 PSI Pro - Compression Tester Kit The Mat Knee Pad 12”x 20” x 1” thick - Made of non-absorbent, flame resistant PVC foam Fluid Evacuator

Fluid Evacuator brake bleeding accessories kit Fluid Transfer Pump Dual Converter Valve Kit Vacuum Gauge / Fuel Pump tester

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

139

DEBURRING TOOLS

DESCRIPTION

NOEO1000 NONG1003 NONG1005 NORB1000 NOTB1000 COUNTERSINK TOOLS

Edge Off, disposable tool, includes S10 blade mounted in an 8mm painted hexagonal alumimium handle with handy pocket clip Noga Bur 3 will do almost all of your deburring jobs, includes NG-1 handle, S10, S20 and S35 blades Noga Bur 5 is suitable for course to extra fine deburring operations, includes NG-1 handle, S10, S20, S35, S101 and S202 blades Rapid Bur, blade is replaceable, holds S blades (3.2mm), includes 12mm hexagonal aluminium painted handle and S10 blade Teddy Bur, blade is replaceable, includes 8mm hexagonal aluminium painted handle and N1 blade

NONG1700 NONG3100 NORC1000 NORC2000 NORC2200

External Rotodrive, chamfers the O.D. on bars and tubes, Range 4-18mm, includes NG-1 handle and external RotoDrive EX18 countersink Countersink, the standard tool for countersinking, is useful for chamfering deep holes, includes NG-3 handle, C holder and C20 countersink (20mm) Mini Reversible, very fine tool for deburring both back and front sides of holes, Range 3-5.5mm, includes steel handle and R1 blade Medium Reversible, Range 5-10mm, includes steel handle and R2 blade Large Reversible, Range 10-22mm, includes steel handle and R3 blade

SCRAPERS

NONG3700 NONG3710 NOSC8000

Mini-Scraper, ideal for tool and die makers, includes NG-3 handle, D holder, triangular mini scraper D50 blade and hex key Internal Scraper, ideal for cross-holes deburring, includes NG-3 handle, D holder and Internal scraper D66 blade Adjustable Scraper, ideal for scraping, trimming and deburring almost all materials, includes 12mm anodized handle and T80 double ended triangular scraper blade

DOUBLE EDGE CUTTING TOOLS

NODB1000 NONG1100 NONG3300

Double Bur, simultaneously removes BURS from both sides of sheet metal, unique round cutting blades can be rotated and reversed for long life, for corners use one blade only, includes DB handle, hand guard and 2 x N80 blades O-Ring Bur, removes burs from internal O-ring grooves, Range 0-3mm (groove width), includes NG-1 handle and O-ring blade Keyway Bur, effectively removes burs from internal and external keyways, Range 2.4-11mm, includes NG-3 handle, K holder & N80K blade

SPECIALTY TOOLS

NOSG1000 NOEO2000 NOLB1000 NONG3800 NOSC1000

Soft Grip, ergonomically held handle, two holes accepts both heavy and light duty S and N blades, includes SG handle, S100 and N10 cobalt blades Plastic Edge Off, most competitive tool, holds all S blades (3.2mm), the blade is replaceable, includes plastic handle with a handy pocket clip and S10 blade Liza Bur, double end blade holder to utilise both N and S blades, telescopes from 20-100mm with N blades and 20-94mm with S blades, includes Uni-handle, SN holder, N1 and N2 blades Leader, chamfering straight or curved edges, ensures 45째 chamfering, includes NG-3 handle, LD holder and L1 blade Scraper, heavy duty double end scraper for longer tool life, can be locked in required position, includes Uni-handle and double ended T120 triangular scraper blade

SETS & KITS

NONG8150 NOEO2100 NONG8350 NONG9100 NONG9400 NORB3000 NOSP1007

S Promo Set de burs steel, aluminium and plastic, includes NG-1 handle and 10 x S10 blades Plastic Edge Off Set, the most economical set, includes 4 Edge Off handles with colour coded sleeves and blades, S10 - green sleeve for aluminium, S20 blade - red sleeve for brass & cast iron, S100 blade - blue sleeve for steel and S150 blade - yellow sleeve for plastic S Tele Set de burs steel, aluminum, plastic, brass and cast iron, includes NG-3 handle, N holder, 5 x N1 blades and 5 x N2 blades Noga Mini Universal Set includes NG-3 handle, N holder, S holder, N1, N2, S10, S20, S30 and S150 blades Gold Box, the most complete box for professional machinists, includes NG-3 handle, Adjustable scraper, Plastic Edge Off handle, S holder, N holder, C holder + C20, D holder + D50, K holder + N80K, Blades N1, N2, S10, S20, S30, S150, D66 and 10.4, Countersink RotoDrive and Hex key (1.5mm), Pack dimensions 270 x 230 x 50mm Noga Trio, standard set, includes 3 RB handles with colour coded sleeves and blades, S20 blade - red sleeve for brass & cast iron, S100 blade - blue sleeve for steel & aluminium and S150 extra fine blade - yellow sleeve for plastic Noga 007 Kit for deburring, cleaning, finishing and countersinking, ideal for maintenance people, includes RB handle, O-ring blade, RD16.5 RotoDrive countersink, RDE18 External RotoDrive countersink, Thread cleaner blade, S100 and S150 blades

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

NOGA

Item No.

DEBURRING TOOLS

COUNTERSINK, DOUBLE EDGE TOOLS, SETS & KITS

140

DEBURRING TOOLS HANDLES, HOLDERS & BLADES

Item No.

DESCRIPTION

HANDLES

NONG1000

NOGA

DEBURRING TOOLS

NOCR2100 NONG3000 NOYT1000

NG-1 Handle, NogaGrip-1 holds all S blades (3.2mm), spare blades are kept inside the handle Cera Cut Handle, a unique plastic handle that holds the blade by its self gripping taper, storage space for spare blades, Length 135mm NG-3 Handle, NogaGrip-3 holds all blade holders, spare blades are kept inside the handle YT Handle, the perfect grip on Noga adjustable scrapers, Needle files, Pins and Drills, Range 2.2-4.5mm

HOLDERS

NOCH3000 NOEL01033 NOEL02003 NOEL04003 NOEL05003 NOEL07013 NOEL0802

C Holder holds C12, C20 & C30 countersinks, M7 external thread, has an hexagonal cross section to prevent rotating inside handle, Length 131mm N Holder holds N blades (2.6mm), telescopes from 25-115mm, Length 131mm S Holder holds S blades (3.2mm), telescopes from 30-115mm, Length 131mm K Holder holds K blades with M3 screw, Length 135mm D Holder is designed to hold D50 and D66 blades, a 3mm setscrew is holding the blade, Hex key included, Length 131mm L Holder holds all L blades, blades are held in a 3mm square hole and tightened with 4mm setscrew, Length 131mm Heavy Duty Roto-Drive Holder, heavy duty crancked holder, external M7 thread to hold C12, C20 and C30 countersinks, 40mm displacement

BLADES Item No.

DESCRIPTION

HEAVY DUTY BLADES

NOBK1010 NOBK2010 NOBK3010 NOBS1010 NOBS1012 NOBS1018 NOBS2010 NOBS3010 NOBS3510 NOBS6001

S101 Blade for fine edges on all materials S202 Blade for brass and cast iron fine edges S150 Blade for holes as small as 1.5mm in diameter S10 Blade for steel, aluminium and plastic S10 Tin S10 Blade with tin coating for abrasive material S100 Cobalt Blade best for plastic and hard materials S20 Blade for brass and cast iron S30 blade removes internal and external burs S35 Blade for straight edges S60 Blade for cross holes in difficult to reach places

LIGHT DUTY BLADES

NOBN1010 NOBN1012 NOBN2010 NOBN3010 NOBN6001

N1 Light duty blade for steel, aluminium and plastic N1 Tin N1 Light duty blade with tin coating for abrasive material N2 Light duty blade blade for brass & cast iron N3 Light duty blade removes internal & external burs N6 Light duty blade for cross holes in difficult to reach places

SCRAPERS

NOBD5010 NOBD5501 NOBD6610 NOBT8001

D50 Scraper blade, dimensions 2.5 x 50mm D55 Carbide scraper blade, dimensions 2.5 x 50mm D66 Internal scraper blade, dimensions 2.7 x 50mm T80 Double ended scraper blade, dimensions 4.2 x 80mm

DOUBLE EDGE

NOBC1001 NOBL3001 NOBN7001 NOBN8010

TC Thread cleaner blade for internal thread, Range max. 3mm L3 Blade for thin sheet metal and small ridges, Range 1-8mm N70K Blade for key seat or key way, Range 1.2-8mm N80 Round blade for Double Bur, use on thin sheet metal, Range 0-12mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

141

DEBURRING TOOLS

Item No.

DESCRIPTION

NOBN8043 NOBN8110 NOBN9009 NOBO1001

N80M42 Round blade for thin sheet metal. Hardness 65-67Rc, Range 0-12mm N80K Blade for key seat or key way, Range 2.4-11mm N90K Blade for key seat or key way, Range 3-15mm O-ring Blade for O-ring grooves, Range 1-3mm

DEBURRING TOOLS

CERA, COUNTERSINKS & COOLING SYSTEMS

CERA

Cera-cut Convexed Blade ideal for surface cleaning and parting line deflashing, made from Ceramic 1250HV Cera-cut Concaved Blade ideal for curved edges and small ridges, made from Ceramic 1250HV

NOGA

NOCR2200 NOCR2500 SPECIALTY

NOBL1001 NOBS1011 NOBS7001 NOBT1200

L1 Blade for steel and aluminium S10 LH Blade - S10 blade for left handed users S70 Blade for straight edges T120 Blade for heavy duty scraping, double end

COUNTERSINKS Item No.

DESCRIPTION

COUNTERSINKS

NOBC1041 NOBC1211 NOBC1651 NOBC2011 NOBC3011 NOBC3201 NOBC6301 NOBC8301 NOBR1001 NOBR3001 NOEX2001

RD10.4 Crancked RotoDrive countersink 10.4mm C12 Countersink 12mm 90° RD16.5 Cranked RotoDrive countersink 16.5mm C20 Countersink 20mm 90° C30 Countersink 30mm 90° RD3.2 Crancked RotoDrive countersink 3.2mm RD6.3 Crancked RotoDrive countersink 6.3mm RD8.3 Cranked Rotodrive countersink 8.3mm R1 Reversible blade for Pipe Cross Holes 3-5.5mm R3 Reversible blade for Pipe Cross Holes 10-22mm "EX18 External crancked RotoDrive countersink 18mm

COOLING SYSTEM Item No.

DESCRIPTION

CUTTING FLUID DISPENSING NOCB0146 Cobra Plastic Bowl 350cc container NOMC0001 Nozzle Nut for Noga Minicool or Cobra NOMC0101 Minicool Spray Unit 270mm

NOMC0232 NOMC0302 NOMC0311 NOMC0320 NOMC0360 NOMC1601

NOMC1700 NOMC3000

Banjo Screw and Washer Minicool Air Line 2m Minicool Suction Line 2m Flexible Loc-Line Hose 324mm Minicool Suction Line 1m Nogacool consists of a manifold & Loc-Line® flexible hose with a nozzle on top and a valve at the bottom, assembled on the powerful On/Off Popeye magnet, the plug attached can be replaced by a second Loc-Line® hose. Nogacool is supplied with a set of three nozzles 1/16",1/8",1/4", working conditions are as follows: Pressure 2-3.4 Bar (30-50 Psi), Flow rate 940 L/hour (250 gal/hour) Max. working Temp. 170°C Minicool Single spray unit, uses the Venturi principle to spray an air + liquid mixture, the Minicool enables the user to easily control both the air flow rate and liquid rate, includes a strong magnetic base, separate on/off air and fluid control, stainless steel armoured syphone hose and air hose, nozzle connected via Loc-Line® flexible hose. Minicool Twin spray unit, same as NOMC1700 but with 2 spray units

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

142

COOLING & HOLDING SYSTEMS

NOGA

COOLING & HOLDING SYTEMS

Item No.

DESCRIPTION

ARTICULATED HOLDERS FAT (FINE ADJUSTMENT TOP) "DG Gauge Holder + magnetic base, Fine Adjustment on Top with universal swivel clamp, holds 6mm, 8mm,3/8"",dovetail and back lug, central NODG61003 locking mechanism with Noga designed spring loaded bearing, Dial gauge holder is 3 dimensional, powerful On/Off magnetic base, instant fixation in any position, fast and easy to set up gauges into required position PH HOLDERS FAB (FINE ADJUSTMENT BASE) "PH (Post Holder) Gauge Holder, powerful On/Off magnetic base with fine adjustment, Universal Swivel Clamp for all dial and test indicators, holds NOPH2040 6mm, 8mm, 3/8"", dovetail and back lug, strong arm lock by using the unique 3-point system, easy to set up gauges into required position SPECIALTY HOLDERS Centering NF (Noga Flex) Holder 8mm, test indicator arm used for centering of workpieces, holds indicator with stem or dovetail, centering rod NONF1015 8mm x 40mm

NONF1021 NONF1030

360째 NF (Noga Flex) Gauge Holder 8mm, On/Off switchable magnet, 5 axis Holder, 360째 fine adjustments at base, holds indicator with 8mm stem and dovetail, central locking mechanism with Noga designed spring loaded bearing 360째 NF (Noga Flex) Gauge Holder 8mm permanent, same as the NONF1021 but with a permanent magnet

INDICATORS

NODG1000

Dial Gauge 0-10mm x 0.01mm graduations, dial diameter 58mm, stem diameter 8mm

MODULAR HOLDERS

NOAD6013 NOAD6030 NODG60003

Camera Nut 1/4" Thread with nut 3/8" x M6 adaptor "DG Arms, Int. M6/Int. M6.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

OSBORN

143

WIRE BRUSHES

Item No.

DIA

BORE SIZE

MAX.RPM

65mm 65mm 65mm 80mm 100mm 120mm

M10 x 1.5 M10 x 1.25 M14 x 2 M14 x 2 M14 x 2 M14 x 2

11,000 11,000 11,000 8,500 8,500 6,500

100mm 125mm 125mm 60mm 60mm 75mm 75mm 80mm

M14 x 2 M14 x 2 Coarse M14 x 2 Stainless M10 x 1.5 M14 x 2 M10 x 1.5 M14 x 2 M14 x 2

8,500 8,500 6,500 11,000 11,000 11,000 11,000 11,000

100mm 100mm 100mm 115mm

M10 x 1.25 M10 x 1.5 M14 x 2 M14 x 2

12,500 12,500 12,500 12,500

(TC75) (TC75) (TC75) (TC100)

OSBORN

DECC0102 DECC0112 DECC0202 DECC0402 DECC0702 DECC1102

WIRE BRUSHES

TWIST KNOT CUP BRUSHES

CRIMPED CUP BRUSHES

DEDC0142X DEDA0815 DEDC13365 DEDC0040X DEDC0202X DEDC0302 DEDC0402 DEDC0812X

(C100) (C125) (C125)

(C75) (C75)

BEVEL TWIST KNOT BRUSH - STEEL WIRE

DEBA8001 DEBA8002 DEBA8003 DEBA2720

Item No.

DIA

MAX.RPM

150mm x 21mm (multi-bore) 200mm x 25mm (multi-bore) 250mm x 38mm (25mm bore)

6,000 5,000 3,500

STEEL WIRE WHEELS (6” & 8” supplied with multi-bore adaptors)

DEAA2303 DEAA3103 DEAA4003X

(W150) (W200) (W250)

GENERAL PURPOSE REFILL SECTION

DEAC0503

75mm x12.7mm Bore=12.7mm

TAPERED BRUSHES (HSD) CRIMPED

DEAI22161 DEAI52161 DEAI02162

(HSD100) (HSD100) (HSD100)

100mm x M10-1.5 bore 100mm x M10-1.25 bore 100mm x M14-2 bore

12,500 12,500 12,500

CIRCULAR BRUSHES - 6mm SHAFT

DEAT0412X DEAT0712X DEAT0903X DEAT0702X DEAT1202X DEAT1502X DEAT1622X DEJB11941

30mm x 10mm stainless steel wire 40mm x 12mm stainless steel wire 50mm x 10mm medium wire 40mm x 12mm fine wire 60mm x 12mm medium wire 70mm x 12mm medium wire 70mm x 18mm brass wire 63mm Safety wire wheel-plastic bonded

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

144

OSBORN WIRE BRUSHES

Item No.

DESCRIPTION

OSBORN

WIRE BRUSHES

SCRATCH BRUSHES

DEHA0703X DEHA9000 DEHA9001X DEHA9002X

4 row Steel wooden handle Splayed Steel plastic handle (Red) Splayed Brass plastic handle (Yellow) Splayed Stainless Steel plastic handle (Green)

FILE CARD

DEHB0502X

Wooden handle

Item No. DECARBONISING BRUSHES

DEEA1021 DEEA1032 DEEA1120 DEEA2250 DEED1211 DEED1212 DEEB1232 DEEB1222 DEEA1022 DEEA1011 DEEA1053 DEEA1052

(D7) (D4) (D9) (D8) (D13) (D15) (D2) (D1) (D3) (D26) (D23) (D22)

Item No.

DESCRIPTION

DIA

Point crimped Flat crimped Semi hollow crimped Long tapered crimped Pencil flat 170mm Pencil pointed 170mm Midget flat Midget flat Flat end brush Rotary Spindle Brush Rotary Spindle Brush Rotary Spindle Brush

22mm 28mm 28mm 22mm 9.5mm 9.5mm 9.5mm 8mm 20mm 50mm 38mm 32mm

DESCRIPTION

DIA

Cup Brush Cup Brush Cup Brush Wire Wheel Wire Wheel Wire Wheel Wire Wheel Wire Wheel

50mm Coarse 75mm Fine 75mm Coarse 50mm 62mm 75mm 100mm Fine 100mm Coarse

contains: 10 x 50mm cup brushes 10 x 50mm wheel 10 x 62mm wheel 6 x 75mm wheel contains: 6 x 75mm wheel 3 x 100mm wheel-fine 3 x 100mm wheel-coarse 3 x 50mm cup-fine 6 x 50mm cup-coarse 3 x 75mm cup-fine 6 x 75mm cup-coarse 6 x 25mm end

(JB90023) (JB90028) (JB90030) (JB90032) (JB90032) (JB90033) (JB90034) (JB90022) (JB90023) (JB90024) (JB90025) (EE09163)

SMALL WIRE BRUSHES – 6mm SHAFT

DEJB90023 DEJB90024 DEJB90025 DEJB90028 DEJB90030 DEJB90032 DEJB90033 DEJB90034 DISPLAY PACKS - 36pcs

DEJB950

DEJB952

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

OSBORN

145

WIRE BRUSHES

Item No.

DESCRIPTION

SIZE

75mm Crimped Cup Brush 75mm Crimped Cup Brush 100mm Crimped Cup Brush 125mm Crimped Cup Brush 65mm Twist Knot Cup Brush 65mm Twist Knot Cup Brush 150mm x 19mm Wire Wheel 150mm x 25mm Wire Wheel 200mm x 19mm Wire Wheel 200mm x 25mm Wire Wheel

M10 x 1.5 M14 x 2 M14 x 2 M14 x 2 M10 x 1.5 M14 x 2 Multi-bore Multi-bore Multi-bore Multi-bore

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

OSBORN

DEZD0009 DEZD0010 DEZD0017 DEZD0021 DEZC0003 DEZC0004 DEZA0005 DEZA0006 DEZA0009 DEZA0010

WIRE BRUSHES

ECO BRUSHES All ECO brushes are brass coated except the twist knot cup brushes which are normal steel.All Wire wheels are supplied with multi-bore adaptors. Brass Coated Brushware

146

WORKSHOP RANGE Carbide BURS, STEP DRILLS,

hss countersinks, hss deburring tools & HACKSAW

P&N

WORKSHOP RANGE

BURS Item No.

DESCRIPTION

RANGE

S918CS06166 S918CS08206 S918CS12256 S918CR06166 S918CR10206 S918CR12256 S918TR06186 S918TR10206 S918TR12256 S918TP06186 S918TP10206 S918TP12256

Cylinder Cylinder Cylinder Ball Nose Ball Nose Ball Nose Flame Flame Flame Tree Tree Tree

6mm 8mm 12mm 6mm 10mm 12mm 6mm 10mm 12mm 6mm 10mm 12mm

LENGTH

16mm 20mm 25mm 16mm 20mm 25mm 18mm 20mm 25mm 18mm 20mm 25mm

SHANK

6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

STEP DRILLS Item No.

RANGE

P107SD0412 P107SD0420 P107SD0430 P107SD0636

4-12mm 4-20mm 4-30mm 6-36mm

STEP

SIZES

9 9 14 11

SHANK

4, 5, 6, 7, 8, 9, 10, 11, 12mm 4, 6, 8, 10, 12, 14, 16, 18, 20mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30mm 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36mm

6 8 10 12

HSS COUNTERSINKS Item No.

DESCRIPTION

RANGE

P107CS0083 P107CS0124 P107CS0205

8.3mm 12.4mm 20.5mm

2.0 - 8.3mm 2.8 - 12.4mm 3.5 - 20.5mm

LENGTH

50 56 63

SHANK

6 8 10

HSS deburring TOOLS Item No.

DESCRIPTION

RANGE

P107CD0510 P107CD1015 P107CD1520

5-10mm 10-15mm 15-20mm

5 - 10mm 10 - 15mm 15 - 20mm

LENGTH

48 65 84

SHANK

8 10 12

HACKSAW Item No.

DIA

P9000010

P&N Hacksaw Soft Grip

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

147

quickbits ROTARY RASPS, corebits,

self centering drill bits & rosehead countersinks

ROTARY RASPS DIA

RASP LENGTH

Cylinder Tree Ball Tapered Ball Flame Cone Bull Nose Milling Milling Milling

15mm 15mm 15mm 15mm 12mm 15mm 15mm 15mm 20mm 25mm

30mm 30mm 12mm 30mm 25mm 30mm 30mm 30mm 30mm 30mm

SHANK LENGTH

30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm 30mm

HSS STEP DRILL - TITANIUM NITRIDE COATED Item No.

DIA

P149040120 P149040250

4-12mm 4-25mm

Metric Metric

DIAMOND TILE CORE BITS Item No.

DIA

P148010006 P148010008 P148010010 * All Metric, Single Pack with Diamond Coated Tip

6.0mm 8.0mm 10.0mm

SELF CENTERING DRILL BITS Item No.

DIA

SCREW GAUGE

P1710781 P1710937 P1711094 P1711250 P1711406 P1711719 P1712031 P1714000

5/64 3/32 7/64 1/8 9/64 11/64 13/64 5/64, 7/64, 9/64 & Adaptor

Suits #3, #4 Screws Suits #5, #6 Screws Suits #5, #6 Screws Suits #8, #10 Screws Suits #8, #10 Screws Suits #12 Screws Suits #14 Screws

PACK QTY

1 1 1 1 1 1 1 4 Piece Set

ROSEHEAD COUTERSINKS Item No.

DIA

P105HCS013 P105HCS016 P105HCS019

13mm 16mm 19mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

QUICKBITS

SHAPE

S791CS1530Q S791BN1512Q S791CP1225 S791CR1530Q S756ML0200Q S756ML0250Q S756ML0150Q S791TP1530Q S791CO1530Q S791TR1530Q

P&N

Item No.

148

quickbits adaptor & contersink, sets,

hole cutter, holesaw sets & files

P&N

quickbits

QUICKBITS Item No.

DIA

SCREW GAUGE

P107B00768 P107B00984 P107B01181 P107B01417 P107B01575 P107B01811 P107B01969 P107B02165

1.95mm 2.50mm 3.00mm 3.60mm 4.00mm 4.6mm 5mm 5.50mm

2G 4G 6G 8G 10G 12G 12G

ADAPTOR & COUNTERSINK Item No.

DESCRIPTION

P107BADAPT P107BCSINK

Quickbit Adaptor Quickbit Countersink 13mm 1/4" Shank

QUICKBIT SETS Item No.

DESCRIPTION

P105SDC000

Screw Pilot Drill / Countersink Quickbit Set - 1.95, 2.5, 3.6, 4, 4.6, 5, Adaptor, Countersink + 9x50mm Screwdriver bits Quickbit Set - Metric 2, 3, 4, 5, 6mm

P150B0FHEX P150BSET6M

PACK QTY

5 18 6

HOLE CUTTER Item No.

DESCRIPTION

P337280007

P&N Hole Cutter TCT 7 Piece

HOLESAW SET Item No.

DIA

SCREW GAUGE

P9109700

TCT Ceramic Tile Holesaw Set

Holesaws: 29mm, 38mm, 44mm, 57mm. Arbor. Adaptor. 1x HSS pilot drill, 1x crbide tipped pilot bit

P9109907

7 Piece Bi-Metal Holesaw Set

HANDLED FILES Item No.

DIA

SCREW GAUGE

Bastard Bastard 2nd Cut Smooth

S300AC1081 S300AC1101 S300AC1102 S300AC1103

Engineers File Flat

200 250 250 250

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

149

HANDLED FILES

Item No.

DIA

SCREW GAUGE

Bastard 2nd Cut Smooth Bastard

S300AE1081 S300AE1082 S300AE1083 S300AE1101

Bastard Bastard Bastard

S300AJ1061 S300AJ1081 S300AJ1101

Bastard Bastard Bastard Bastard

S300AG1061 S300AG1081 S300AG1101 S300AG1121

Bastard

S300AH1061

Bastard Bastard Bastard

S300BE1040 S300BE1060 S300BE1080

Bastard Bastard Bastard Bastard

S300CA1061 S300CA1081 S300CA1101 S300CA1121

Bastard Bastard Bastard

s300CC1081 S300CC1101 S300CC1121

Bastard Bastard Bastard

S300EA1081 S300EA1101 S300EA1121

Bastard Bastard

S300EC1081 S300EC1101

5/32 3/16 7/32 1/4

S300DA1580 S300DA1680 S300DA1780 S300DA1880

Engineers File Square

150 200 250 Engineers File Round

150 200 250 300 Warding File

150 Saw File Slim Taper

100 150 200 Saw File 2-Square Edge Mill

150 200 250 300 Saw File 1 Round Edge Mill

200 250 300 Wood Rasp Half Round

200 250 300 Cabinet Rasp

200 250 Chainsaw File

200 200 200 200 Handles - Soft Grip

100 150 200-250 300

S300SGK003 S300SGK004 S300SGK005 S300SGK006

SETS

4 Piece Bastard Cut SetFlat, Half Round, Round, Square x 200mm

S300SET004

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

P&N

200 200 200 250

HANDLED FILES

Engineers File Half Round

TECHNICAL SECTION

150

carbide bur - 6mm shank information For shaping or forming metal • For use in air & electric die grinders

Speed Chart (maximum) (INCH)

SPEED

Ø6.0mm

DIAMETER (MM)

1/4

22,000 RPM

Ø8mm

5/16

20,000 RPM

Ø10mm

3/8

18,000 RPM

Ø12mm

1/2

16,000 RPM

Features • Made from solid carbide (K30) Shank = S45C Steel

Application

• The double cut bur allows for rapid stock removal in harder materials • The chisel tooth pattern not only minimises tool chatter but reduces the chip to a granular shape, in most materials • 6mm shank

Helpful Hints • For use in air & electric die grinders, do not use in conventional electric drills as insufficient speed can cause breakage • Position bur in drive as close as possible to head of collet • Allow tool to do its own cutting - do not force the cut or use excessive pressure • Allow tool to be running at full speed before making contact with the work piece • If sparks are evident in use, either bur is dull and should be replaced or material is too hard

Safety • Eye protection must be worn at and around bur application • Do not exceed maximum safe operating speed (see chart)

CYLINDER

BALL NOSE

FLAME

TREE

S918CS12256

TECHNICAL SECTION

151

Rotary Rasps information Rotary Rasps

Speed Chart (maximum)

• For cutting, shaping or forming timber, plastic & rubber

DIAMETER

• Hex shank allows operator to switch from one profile to another quickly when used in conjunction with a P&N Quickbit Adaptor.

Ø12mm

5,000 RPM

Ø15mm

2,500 RPM

• Made in Taiwan.

Ø20mm

1,500 RPM

Ø25mm

1,000 RPM

Features

SPEED

• Made from Tool Steel • Will not clog • Hardened for long life • Hex shank suits quick change adaptors

Safety • DO NOT USE IN DIE GRINDERS • Ensure tool is fully inserted into the chuck during use

MILLING

BULL NOSE

CONE

FLAME

S756ML0150Q

TAPERED BALL

BALL

TREE

CYLINDER

• Do not exceed maximum safe operating speed (see chart)Speed Chart (maximum)

TECHNICAL SECTION

152

choosing the right file 1. PROFILE

Holding the file

The profile of your file should be the first consideration in tool selection. Choose a profile that best matches your application.

Single Handed Operation: Hold with the handle resting in your palm with your forefinger at the top of the handle pointing to the tip. Two Handed Operation: Hold with the handle resting in your palm with your thumb at the top of the handle pointing to the tip. Grip the point of the file in the other hand between the thumb and the first two fingers with the thumb being on the top of the file.

Flat: Multi-purpose use on flat and curved external surfaces. Designed for smoothing, removing burs & sharp edges. Square: For filing slots, keyways, splines and the inside corners of rectangular or square holes. Round: For filing & enlarging holes, circular or rounded grooves. Half-round: For multi-purpose use on concave surfaces & crevices & the rounding out of holes. Can also be used on the flat face. Triangular: Used for sharpening saw teeth & internal corners.

Helpful Hints • Hold the workpiece in a vice at a suitable height to apply adequate pressure. • To prevent damage to workpiece, use protectors between the workpiece and vice jaws. • When heavy pressure is required, hold file at tip wih thumb pointing forward in line with the file. For lighter pressure, place thumb at right angles to file. • File on forward stroke only, lifting on back stroke to prevent damaging the file.

2. Length

Care of the file

Desired stroke length will determine the length of the file. This is measured exclusive of the tang, from point to heel.

• A new file should be used with light pressure in the beginning, preferably on a surface which has been filed earlier. • Keep file stored away from any water or grease. • Retain the file packaging, or wrap the file in a cloth for protection. • Use a wire brush to clean the file teeth. • Do not use oil on the file.

3. Cut These cuts are selected according to the material of the workpiece, the desired removal of material and the surface finish. Single Cut: Single cut files (mostly all saw files are single cut) are used for sharpening and edging applications.

file selector

Double Cut: Need less effort for filing & also gives a good surface finish.

Flat file

For general work on iron, steel etc.

Rasp Cut: Special cut formation for rapid stock removal from surface of softer materials like wood or leather.

Half Round File

For flat, concave and convex surfaces.

Square File

For filing slots, key seats and general surface filing.

4. COARSENESS

Round File

For circular openings and concave surfaces.

1 Edge Round Mill File

For sharpening saws and other tools that require a fine finish. The round edge also allows the filing of saw gullets.

2 Edge Square Mill File

For sharpening saws and other tools that require a fine finish.

3 Edge Square Mill File

For sharpening saws and other tools that require a fine finish.

Slim Taper

For sharpening hand saws.

Chainsaw File

For sharpening round, hooded chainsaw teeth.

Warding File

Locksmiths file for ward notches in keys and narrow places. For narrow slots, toolmaking and hobby applications.

BASTARD CUT: SECOND CUT: SMOOTH CUT:

Bastard Cut: Coarse finish. For stock removal. Second Cut: Medium - coarse finish. For moderate stock removal. Smooth Cut: Fine finish. For smooth surface finish.

How to use a file correctly There are three methods to use a file: Straight filing: Pushing the file lengthwise-straight ahead or slightly diagonally-across the workpiece. Draw filing: Holding the file at each end, pushing and drawing it across the workpiece. Lathe filing: Holding the file against workpiece in a lathe.

Mill Long Angle Lathe File

Rapid, free cutting files designed for lathe filing.

Wood Rasp

For use on wood and soft metals.Multi-purpose rasp for use on concave surfaces and crevices, and the rounding out of holes.

Cabinet Rasp

Punched teeth for rapid removal of soft materials - wood, soft plastics, fibreglass, soft metals. Gives a finer finish than wood rasp.

Horse Rasp

Double ended, rasp teeth on one side, file teeth on other. Ideal for shoeing racetrack and riding horses.

153

PRESSURE GAUGES & INFLATORS

PCTPG60J03 PCALG3J03 PCRHA2031 PCC01A05 PCC01B05 PCC03A03 PCC03B03 PCC08E72 PCC02J05 PCC02H06 PCC012A03

Universal Service Tyre Gauge 10-160 lbf/in² & 80-1100kpa Mark 3 (MK 3) Hiflow Inflator with twin hold-on connector open end 0-138 lbf/in² & 0-940kPa Replacement Hose for ALG3J03 Twin Hold-On Connector (open end) Twin Hold-On Connector (closed end) Twin Clip-On Connector (open end) Twin Clip-On Connector (closed end) Euro Single Clip-On Connector for dial type airline gauges Single Clip-On Connector (closed end) with tailpiece for 1/4" hose Single Clip-On Connector (open end) with tailpiece for 1/4" hose Inline Hold On O/End 8V1 Std

VALVE CORES, FOOT PUMPS & ACCESSORIES

PCTVT05 PCFP7H02/2 PCFP4H02/2 PCFPA22 PCFPA07 PCTDG16C05

Tyre Valve Tool-4 way - carded Footpump Double-Barrel E35 Footpump with gauge Multi–fit hose with thumb-lock connector and tapered thread suitable for many footpump models Thumb-Lock Tyre Valve Connector for Footpump Hose Tyre Tread Depth Gauge metric calibrated 1-26mm skin packed

BLOW GUN

PCBG5002

Air Blow Gun plastic moulded body with brass inner valve

VALVE ACCESSORIES - ALL CARDS ARE BLISTER PACKED AND PRICED PER CARD

PCTA09/M PCTA23/M PCTA30/M

Long Valve Cores-cards of 4 19mm Tyre Valve Extensions. Card of 4 31.5mm Tyre Valve Extensions. Card of 4

SERVICE KITS

PCSPK50 PCSPK48 PCSAS4119

For Twin Hold-On Connector (closed end) For Twin Hold-On Connector (open end) Valve Kit For Mk3 From 1999

QUICK RELEASE AIR LINE COUPLINGS

PCAC61CF

Air line coupling 1/4" BSPT female = 210

MALE THREADED TAILPIECES

PCHC5656 PCHC2479

1/4"BSPT-1/4" bore hose = 6mm 1/4"BSPT-1/2" bore hose = 12.7mm

CONNECTORS

PCA6924 PCA6923 PCA6930

Threaded adaptor female thread 1/4" BSPT (A2609) Threaded adaptor male thread 1/4" BSPT (A2608) Adaptor-tailpiece 3/8" bore hose = 10mm (A3948)

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PRESSURE GAUGES & INFLATORS

DESCRIPTION

PCL

Item No. TYRE PRESSURE GAUGES, TYRE INFLATORS & COUPLINGS

154

ENGINEERS TOOLS

Hand Tools & Measuring Equipment

Item No.

SIZE

DESCRIPTION

3" 4" 6" 8" 10" 12"

Spring Divider Spring Divider Spring Divider Spring Divider Spring Divider Spring Divider

3" 4" 6" 8" 10" 12"

Inside Caliper Inside Caliper Inside Caliper Inside Caliper Inside Caliper Inside Caliper

3" 4" 6" 8" 10" 12" 6"

Outside Caliper Outside Caliper Outside Caliper Outside Caliper Outside Caliper Outside Caliper Jenny Caliper - Odd leg

2" 3" 4" 6" 9" 12"

Engineers Square Engineers Square Engineers Square Engineers Square Engineers Square Engineers Square

PEC

ENGINEERS TOOLS

SPRING DIVIDERS

PE8100-003 PE8100-004 PE8100-006 PE8100-008 PE8100-010 PE8100-012 INSIDE CALIPERS

PE8200-003 PE8200-004 PE8200-006 PE8200-008 PE8200-010 PE8200-012 OUTSIDE CALIPERS

PE8300-003 PE8300-004 PE8300-006 PE8300-008 PE8300-010 PE8300-012 PE8400-006 ENGINEERS SQUARES

PE7000-002 PE7000-003 PE7000-004 PE7000-006 PE7000-009 PE7000-012 DOUBLE SQUARES

PE7104-264 PE7105-266

4" Double Square English/Metric 6" Double Square English/Metric

Engineers Hand Tools & Measuring Equipment Item No.

DESCRIPTION

TELESCOPIC GAUGES

PE3S-5 PE3AA PE3A PE3B PE3C PE3D PE3E

5pc Telescopic Gauge Set (3A-3E) 8-12.5mm Telescopic Gauge 12.5-19mm Telescopic Gauge 19-32mm Telescopic Gauge 32-54mm Telescopic Gauge 54-90mm Telescopic Gauge 90-150mm Telescopic Gauge

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

155

ENGINEERS TOOLS

Hand Tools & Measuring Equipment

Item No.

DESCRIPTION

0-2.25mm Pin Chuck Set of 3 0-5mm Pin Vice Set of 4 (0-.188") 0-.040" Pin Vice .032"-.059" Pin Vice .052"-.122" Pin Vice .118"-188" Pin Vice

TAP WRENCHES

PE4300-210 PE4300-220 PE4300-230 PE4300-215 PE4300-225 PE4300-235

1/16-5/32" T-Type Tap Wrench 5/32-1/4" T-Type Tap Wrench 1/4-1/2" T-Type Tap Wrench 1/16-5/32" Ratchet Tap Wrench 5/32-1/4" Ratchet Tap Wrench 1/4-1/2" Ratchet Tap Wrench

MISC TOOLS

PE321 PE4100-004 PE5031 PE5032 PE4S-4

Scriber, double ended 8 1/2" long Wiggler Set with four attachments Centre Gauge (screw cutting gauge) 60deg.English Centre Gauge (screw cutting gauge) 60deg.Metric 1/8-1/2" Set of Small Hole Gauges

PUNCHES

PE6200-005 PE6200-1/16 PE6200-5/64 PE6200-3/32 PE6200-9/64 PE6200-5/32 PE6300-008 PE6300-1/16 PE6300-3/32 PE6300-1/8 PE6300-5/32 PE6300-3/16 PE6300-7/32 PE6300-1/4 PE6300-5/16 PE6301-058 PE6301-1/8 PE6301-3/16 PE6301-1/4 PE6301-5/16 PE6301-3/8 PE11 PEP170

Centre Punch Set 5pce 1/16,5/64,3/32,9/64,5/32" Centre Punch 3" long Centre Punch 4" long Centre Punch 4" long Centre Punch 4" long Centre Punch 4" long Pin Punch Set 8pce Short 1/16 - 5/16" x 4" long Pin Punch 4" x 1/16" Short Pin Punch 4" x 3/32" Short Pin Punch 4" x 1/8" Short Pin Punch 4" x 5/32" Short Pin Punch 4" x 3/16" Short Pin Punch 4" x 7/32" Short Pin Punch 4" x 1/4" Short Pin Punch 4" x 5/16" Short Long Pin Punch Set 5pce 1/8 - 3/8" x 4" long Long Pin Punch 8" x 1/8" 3 1/2" drive pin Long Pin Punch 8" x 3/16" Long Pin Punch 8" x 1/4" Long Pin Punch 8" x 5/16" Long Pin Punch 8" x 3/8" Transfer Dot Punch Automatic Centre Punch

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PEC

PE6000-003 PE6000-004 PE6000-004A PE6000-004B PE6000-004C PE6000-004D

ENGINEERS TOOLS

PIN CHUCKS

156

ENGINEERS TOOLS

Hand Tools & Measuring Equipment

Item No.

DESCRIPTION

SCREW PITCH / DRILL GAUGES

PEC

ENGINEERS TOOLS

PE5651 PE5625

Screw Pitch Gauge 51 blade English 4-84TPI Screw Pitch Gauge 28 blade Metric .25-2.5 pitch Screw Pitch Gauge 28 blade Eng/Metric 4-56TPI .5-6mm pitch Screw Pitch Gauge 30 blade English Drill Gauge Imperial 1/16 - 1/2" x 1/64" Drill Gauge Metric 1.5 - 12.5mm

PE5629 PE5642 PE5052 PE5076 RULES

PE752-150 PE752-300 PE751-150 PE751-300

150mm x 19mm Rigid Rule Metric 300mm x 25mm Rigid Rule Metric 150mm x 12mm Flexible Rule Metric 300mm x 12mm Flexible Rule Metric

COMBINATION SETS

PE7127-012H PE7128-300H PE7127-012 PE7128-300

12"/300mm 4pce Combination Set hardened 300mm 4pce Combination Set hardened 12"/300mm 4pce Combination Set cast iron 300mm 4pce Combination Set cast iron 12"/300mm 2pce Combination Set cast iron (rule & square) Carpenters Square 12"/300mm blade

PE7144-012 PE7111 COMBINATION SET COMPONENTS

PECLAMPSCREW PE7187-012 PE7188-300 PE7187-024 PE7118A-012 PE7119A-012 PE7121A-012 PE7121A-012H PE7122A-012

Clamp & Screw for Combination Sets 12"/300mm Eng/Metric Rule 300mm Metric Rule 24"/600mm Eng/Metric Rule Non-reverse Protractor Head Reversible Protractor Head Square Head cast iron Square Head hardened Centre Head cast iron

WIRE GAUGES

PE5056 PE5058

Wire Gauge American standard for non-ferrous metals range 0-36 Wire Gauge American standard for shee/plate of iron or steel range 0-36

EDGE & CENTRE FINDERS

PE4200-039 PE4200-074 PE4200-076 PE4200-080 PE4200-081 PE4200-100

Edge finder 1/2” x .200” tip Edge & Centre finder 1/2” x .200” tip Double end finder 1/2” x .200” & 1/2” x .500” tip Edge finder 10mm x 10mm Edge finder 3/8” x 10mm tip Centre finder for round work pieces

DEPTH & ANGLE GAUGE

PE7004-M15

Depth & Angle gauge 150mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

157

PRECISION TOOLS

ROTARY TOOL BITS & ACCESSORIES

Item No.

DIA. (MM)

SCREW GAUGE

2 pcs x 1.4mm ball 2 pcs x 2.3mm ball 2 pcs x 1.4mm cylindrical 2 pcs x 2.3mm cylindrical 2 pcs x 1.4mm reverse taper 2 pcs x 2.3mm reverse taper 2 pcs x 2.3mm flame 2 pcs x 2.3mm countersink 2 pcs x 2.3mm wheel

2.35mm 2.35mm 2.35mm 2.35mm 2.35mm 2.35mm 2.35mm 2.35mm 2.35mm

4.0mm ball 6.0mm ball 7.8mm oval 6.0mm cylindrical 7.8mm cylindrical 4.0mm reverse taper 4.0mm flame 6.0mm cone 6.0mm point 6.0mm wheel 9.5mm wheel

2.35mm 3.00mm 3.20mm 3.00mm 3.20mm 2.35mm 2.35mm 3.00mm 3.00mm 3.00mm 3.20mm

1.8mm ball 3.0mm ball 1.8mm cylindrical 3.0mm cylindrical 1.8mm cone 3.0mm cone 3.0mm flame

2.35mm 3.00mm 2.35mm 3.00mm 2.35mm 3.0mm 3.0mm

3.0mm radius, convex profile 4.0mm raduis, concave profile 3.0mm dia. straight groove 6.4mm dia. Vee groove

3.00mm 3.00mm 3.00mm 3.00mm

1.0mm ball 1.4mm ball 1.8mm ball 1.5mm cylindrical 3.2mm cylindrical 1.6mm flame 2.8mm point 5.0mm disc

2.35mm 2.35mm 2.35mm 2.35mm 3.00mm 2.35mm 3.00mm 2.35mm

2 pcs x cylindrical 3 x 8mm 2 pcs x cylindrical 5 x 10mm

3.00mm 3.00mm

Steel Cutters

PG1030 PG1050 PG1065 PG1100 PG1105 PG1140 PG1190 PG1240 PG1310 PG1370 PG1375 Tungsten Carbide Cutters

PG1510 PG1520 PG1540 PG1550 PG1560 PG1570 PG1580 HSS Router Bits

PG1710 PG1720 PG1750 PG1770 Diamond Points

PG1905 PG1910 PG1915 PG1925 PG1935 PG1950 PG1970 PG1980 Ruby Grinding Stones

PG2010 PG2025

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PG MINI

PG1010 PG1020 PG1070 PG1080 PG1120 PG1130 PG1170 PG1270 PG1340

PRECISION TOOLS

Steel Engraving Cutters

158

PRECISION TOOLS

PG MINI

PRECISION TOOLS

ROTARY TOOL BITS & ACCESSORIES

Item No.

DIA. (MM)

SCREW GAUGE

PG2040 PG2055 PG2070 PG2085 PG2100 PG2115 PG2130 PG2145 PG2160 PG2175 PG2190 PG2205 PG2220 PG2235

2 pcs x cylindrical 8 x 10mm 2 pcs x cylindrical 10 x 12mm 2 pcs x cylindrical 12 x 15mm 2 pcs x cone 3 x 8mm 2 pcs x cone 5 x 10mm 2 pcs x cone 8 x 12mm 2 pcs x bullet 6 x 10mm 2 pcs x bullet 10 x 20mm 2 pcs x ball 6mm 2 pcs x ball 10mm 2 pcs x cylindrical/cone 6 x 12mm 2 pcs x cylindrical/cone 8 x 15mm 2 pcs x cylindrical/cone 10 x 20mm 2 pcs x reverse taper 8 x 6mm

3.00mm 3.00mm 3.00mm 2.35mm 2.35mm 3.00mm 3.00mm 3.00mm 3.00mm 3.00mm 3.00mm 3.00mm 3.00mm 3.00mm

2 pcs x cone 3 x 8mm 2 pcs x cone 5 x 10mm 2 pcs x ball 4mm 2 pcs x reverse taper 8 x 6mm 2 pcs x round head 6 x 10mm 2 pcs x flame 5 x 10mm

2.35mm 2.35mm 3.00mm 3.00mm 3.00mm 3.00mm

Silicon Carbide Grinding Stones

PG2410 PG2420 PG2435 PG2450 PG2465 PG2480 Lenticular Grinding Stones

PG2510 PG2520

2 pcs x 22mm ruby abrasive 2 pcs x 22mm silicone carbide

Wheel Grinding Stones

PG2610 PG2620 PG2630 PG2640

2 pcs x 22mm ruby abrasive 2 pcs x 22mm silicon carbide 2 pcs x 22mm white abrasive 2 pcs x 22mm brown abrasive

Chainsaw Sharpening Stones

PG2710 PG2715 PG2720

2 pcs x cylindrical 4.0 x 19mm 2 pcs x cylindrical 4.8 x 21mm 2 pcs x cylindrical 5.6 x 23mm

3.00mm 3.00mm 3.00mm

Stone Dresser

PG2910

16 x 12 x 65mm double grain

Flap Grinding Wheels

PG3020 PG3030

20 x 5mm x 80grit 30 x 10mm x 80grit

3.00mm 3.00mm

Rubber Pad and Adhesive Sanding Discs

20mm rubber backing pad with 6 assorted discs 10 pcs x 20mm discs 100grit 10 pcs x 20mm discs 220grit

PG3210 PG3220 PG3230

3.2mm

Sanding Drum Mandrel and Sanding Belts

PG3610 PG3620 PG3630 PG3640 PG3650

Mandrel 13 x 13mm 12 pcs x 13mm belts 60grit 12 pcs x 13mm belts 120grit Mandrel 9.5 x 13mm 12 pcs x 9.5mm belts 60grit

3.20mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

159

PRECISION TOOLS

ROTARY TOOL BITS & ACCESSORIES

SCREW GAUGE

3.20mm

Steel Brushes

PG4005 PG4010 PG4015 PG4020

End brush 5mm Cup brush 12mm Wheel brush 21mm 3 pcs x Assorted Steel brushes

2.35mm 2.35mm 2.35mm 2.35mm

End brush 5mm Cup brush 12mm Wheel brush 21mm 3 pcs x Assorted Brass brushes

2.35mm 2.35mm 2.35mm 2.35mm

End brush 5mm Cup brush 12mm Wheel brush 21mm 3 pcs x Assorted Bristle brushes

2.35mm 2.35mm 2.35mm 2.35mm

End brush 5mm Cup brush 12mm Wheel brush 21mm 3 pcs x Assorted Nylon brushes

2.35mm 2.35mm 2.35mm 2.35mm

12mm disc 12mm lenticular/convex disc

2.35mm 2.35mm

6mm flame 5mm bullet 6mm cylindrical

3.00mm 3.00mm 3.00mm

Brass Brushes

PG4055 PG4060 PG4065 PG4070 Black Bristle Brushes

PG4105 PG4110 PG4115 PG4120 White Nylon Brushes

PG4155 PG4160 PG4165 PG4170 Silicon Polishers

PG4305 PG4310 Rubber Polishing Points

PG4505 PG4510 PG4515 Brown Rubber Polishing Disc

PG4595

2 pcs x 22mm dia. x 3mm

Felt Discs

PG4605 PG4610 PG4615 PG4680

11mm taper 14mm reverse taper 22mm wheel Kit 3 assorted points + mandrel + polishing paste

2.35mm 2.35mm 2.35mm 2.35mm

Cotton, Soft Felt, Chamois, Scotch Fabric Discs

PG4810 PG4820 PG4830 PG4840 PG4850

24mm cotton yarn disc 21mm soft felt disc 21mm chamois disc 21mm cotton fold disc 22mm abrasive scotch fabric disc

2.35mm 2.35mm 2.35mm 2.35mm 2.35mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PRECISION TOOLS

DIA. (MM)

12 pcs x 9.5mm belts 120grit Mandrel 6.3 x 13mm 12 pcs x 6.3mm belts 60grit 12 pcs x 6.3mm belts 120grit

PG MINI

Item No.

PG3660 PG3670 PG3680 PG3690

160

PRECISION TOOLS

ROTARY TOOL BITS & ACCESSORIES

Item No.

DIA. (MM)

Shaft Size

Polishing Paste

PG MINI

PRECISION TOOLS

PG4905 PG4910 PG4915

Pink pre-polishing paste - universal White final polishing paste - universal Red lapping paste for copper, brass, bronze

Cutting Discs

PG5010 PG5030 PG5035 PG5050 PG5130

5 pcs x 22mm dia. x 0.25mm 10 pcs x 22mm dia. x 0.6mm 50 pcs x 22mm dia. x 0.6mm 5 pcs x 40mm dia. x 1.0mm reinforced 2 pcs x 32mm dia x 2.2mm

Spiral Cutting Bits

PG5905 PG5910 PG5915

Wood spiral cutting bit 3.2mm Drywall spiral cutting bit 3.2mm Ceramic spiral cutting bit 3.2mm

Mini Steel Saw Blades

PG5405 PG5410 PG5415

13mm 19mm 25mm

Diamond DiscS

PG5710 PG5715 PG5720 PG5750

Diamond saw blade 22mm Diamond saw blade 30mm Diamond saw blade 40mm Diamond saw blade 22mm segmented

HSS Drill Bits

PG6005 PG6006 PG6008 PG6010 PG6012 PG6015 PG6020 PG6024 PG6030 PG6100

2 pcs x 0.5mm 2 pcs x 0.6mm 2 pcs x 0.8mm 2 pcs x 1.0mm 2 pcs x 1.2mm 2 pcs x 1.5mm 2 pcs x 2.0mm 2 pcs x 2.4mm 2 pcs x 3.0mm Kit 20 drill bits 0.3mm - 1.6mm

HSS Reinforced Drill Bits

PG6206 PG6208 PG6210 PG6212 PG6215 PG6220

0.6mm 0.8mm 1.0mm 1.2mm 1.5mm 2.0mm

2.35mm 2.35mm 2.35mm 2.35mm 2.35mm 2.35mm

Collet setS

PG8010 PG8020

1.0, 1.5, 2.35, 3.0, 3.2mm and collet nut 0.5, 2.35, 3.0, 3.2mm and collet nut (Dremel)

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

161

PRECISION TOOLS

ROTARY TOOL BITS & ACCESSORIES

Item No.

DIA. (MM)

SCREW GAUGE

Chucks

PG8550 PG8560

Keyless chuck 0,4-3,2mm Dremel keyless chuck 0,4-3,2mm Screw mandrel Screw mandrel reinforced Tapered mandrel

3.00mm 2.35mm 3.00mm

Kits

PG8210 PG8230 PG8250 PG8270

10 pce engraving kit 10 pce grinding and sharpening kit 9 pce cleaning and polishing kit 58 pce cutting kit

Flexible Drive Shaft

PG8500

80cm long with 2.35 collet

POWER TOOLS

PG9400 PG9500 PG9550 PG9200 PG9250

Cordless Rotary 9.6V Tool High Torque Rotary 230V Tool High Torque Rotary 230V Tool & Accessories Kit Engraving Pen 230V Engraving kit 230v

Keyless chuck Keyless chuck Keyless chuck 2.35mm 2.35mm

DRILL STAND

PG8700

Drill Stand

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PG MINI

PG8100 PG8110 PG8120

PRECISION TOOLS

Mandrels

162

MARKING PUNCH SETS

Item No.

DIAMETER

SCREW GAUGE

Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Number Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set Standard Letter Punch Set

1.0mm - .040" 1.5mm - 1/16 2.0mm - 5/64 2.5mm - 3/32 3.0mm - 1/8 4.0mm - 5/32 5.0mm - 3/16 6.0mm - 1/4 8.0mm - 5/16 10.0mm - 3/8 12.5mm - 1/2 1.0mm - .040" 1.5mm - 1/16 2.0mm - 5/64 2.5mm - 3/32 3.0mm - 1/8 4.0mm - 5/32 5.0mm - 3/16 6.0mm - 1/4 8.0mm - 5/16 10.0mm - 3/8 12.5mm - 1/2"

PRYOR

MARKING PRODUCTS

Standard Number Punch SetS

EP5017 EP3010 EP4013 EP5016 EP6019 EP7046 EP8049 EP0042 EP3062 EP4065 EP6087 EP2035 EP4035 EP5038 EP6030 EP7033 EP8052 EP9055 EP1059 EP7071 EP8074 EP9093

REVERSE PUNCH SETS- Available by indent order only

EP3017 EP5012 EP7018 EP9048 EP1041 EP4031 EP5034 EP8032 EP0052 EP2058

Reverse Number Punch Set Reverse Number Punch Set Reverse Number Punch Set Reverse Number Punch Set Reverse Number Punch Set Reverse Letter Punch Set Reverse Letter Punch Set Reverse Letter Punch Set Reverse Letter Punch Set Reverse Letter Punch Set

1.5mm - 1/16 2.0mm - 5/64 3.0mm - 1/8 5.0mm - 3/16 6.0mm - 1/4 1.5mm - 1/16 2.0mm - 5/64 3.0mm - 1/8 5.0mm - 3/16 6.0mm - 1/4

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

163

MARKING PUNCHES & TYPE

Item No.

DIAMETER

SCREW GAUGE

Dotstress Letter Punch Set Dotstress Letter Punch Set Dotstress Number Punch Set Dotstress Number Punch Set

6.0mm - 1/4 8.0mm - 5/16 6.0mm - 1/4 8.0mm - 5/16

COMBINATION LETTER & NUMBER PUNCH SETS

EPS3603 Letter & Number Punch Set EPS3606 Letter & Number Punch Set Each set contains 36 unplated punches, A-Z, 0-9 and the symbol ‘&’.

3.0mm - 1/8 6.0mm - 1/4

FIGURE & LETTER PUNCHES – SINGLE PIECES

EPL/EPF10 EPL/EPF15 EPL/EPF20 EPL/EPF25 EPL/EPF30 EPL/EPF40 EPL/EPF50 EPL/EPF60 EPL/EPF80 EPL/EPF100 EPL/EPF125

Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch Single Punch

1.0mm 1.50mm 2.00mm 2.50mm 3.00mm 4.00mm 5.00mm 6.00mm 8.00mm 10.00mm 12.50mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

PRYOR

EP4070 EP6072 EP2060 EP4062

MARKING PRODUCTS

DOTSTRESS PUNCH SETS - Available by indent order only

164

SHEET METAL MARKING PUNCHES PUNCHES & TYPE Item No.

DIAMETER

SCREW GAUGE

Character Spacer Character Spacer Character Spacer Character Spacer Character Spacer Character Spacer Character Spacer

1.5mm-1/16" 1.5mm-1/16" 2.0mm-5/64" 2.0mm-5/64" 2.5mm-3/32" 2.5mm-3/32" 3.0mm-1/8" 3.0mm-1/8" 4.0mm-5/32" 4.0mm-5/32" 5.0mm-3/16" 5.0mm-3/16" 6.0mm-1/4" 6.0mm-1/4"

Fount Set Fount Set Fount Set Fount Set Fount Set Fount Set

1.5mm-1/16" 2.0mm-5/64" 2.5mm-3/32" 3.0mm-1/8" 4.0mm-5/32" 5.0mm-3/16"

PRYOR

SHEET METAL PUNCHES

PRYOR TYPE – SINGLE PIECES

EP15 EP15SPACER EP20 EP20SPACER EP25 EP25SPACER EP30 EP30SPACER EP40 EP40SPACER EP50 EP50SPACER EP60 EP60SPACER 4mm - 6mm - Available by indent order only PRYOR FOUNT SETS WITH HAND HOLDER

EP112HA EP112H2M EP112HB EP112HC EP106H4M EP106HE PRYOR TYPE HOLDER ONLY

EPH3.2-20 EPH6.35-29 EPH6.35-39 EPH8.0-39 EPH9.6-40

Suits type sizes 1, 1.5mm Suits type sizes 2, 2.5, 3mm Suits type sizes 2, 2.5, 3mm Suits type sizes 4, 5mm Suits type size 6mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Q-MAX

165

sheet metal punches

Item No.

DIAMETER

SCREW GAUGE

Q-Max 1" 2Pt Sheet Metal Punch Q-Max 1-1/2 2Pt Sheet Metal Punch Q-Max 1-1/4 2Pt Sheet Metal Punch Q-Max 1-1/8 2Pt Sheet Metal Punch Q-Max 1-3/16 2Pt Sheet Metal Punch Q-Max 1-3/8 2Pt Sheet Metal Punch Q-Max 16mm 2Pt Sheet Metal Punch Q-Max 20mm 2Pt Sheet Metal Punch Q-Max 22.5mm 2Pt Sheet Metal Punch Q-Max 25mm 2Pt Sheet Metal Punch Q-Max 3/4 2Pt Sheet Metal Punch Q-Max 32.5mm 2Pt Sheet Metal Punch Q-Max 40mm 2Pt Sheet Metal Punch Q-Max 5/8 2Pt Sheet Metal Punch Q-Max 50mm 2Pt Sheet Metal Punch Q-Max 7/8 2Pt Sheet Metal Punch

1" 1.1/2" 1.1/4" 1.1/8" 1.3/16â&#x20AC;? 1.3/8" 16mm 20mm 22.5mm 25mm 3/4" 32.5mm 40mm 5/8" 50mm 7/8"

Three Point Sheet Metal Punches with Thrust Race

QM20-3TR QM22-3TR QM25-3TR QM32-3TR

Q-Max 20mm 3Pt Sheet Metal Punch (Tr) Q-Max 22mm 3Pt Sheet Metal Punch (Tr) Q-Max 25mm 3Pt Sheet Metal Punch (Tr) Q-Max 32mm 3Pt Sheet Metal Punch (Tr)

Two point punches are suitable for; Mild & Stainlees steel upto 16swg (162mm) Sheet Cooper Brass and Aluminium upto 2.0mm Many types of sheet metal and soft plastisa etc Three point Punches are suitable for Milde steel up to 10swg (3mm) Stainless steel up to 14swg (2mm) Note: For Stainless steel use Holes should not be punched in one operation in Stainless steel. Step 1: screw only until the punch tips have cut the material Step 2: loosen the screw and turn the punch 90 degrees Step 3: now complete punching the hole By following the above steps the shearing force on the punch is reduced.

20mm 22mm 25mm 32mm

Q-MAX

QM01-2 QM112-2 QM114-2 QM118-2 QM1316-2 QM138-2 QM16-2 QM20-2 QM225-2 QM25-2 QM34-2 QM325-2 QM40-2 QM58-2 QM50-2 QM78-2

SHEET METAL PUNCHES

Two Point Sheet Metal Punches

RECOIL

Thread Inserts, Repairmanufactured Kits, Installation Tooling,for Taps & Gauges. brand threaded inserts; tooling, Diager productsThread have been in France over 55 years.Recoil Diager distinguishes itself installation from its competitors taps, and thread repair kitsdesign accommodate a wide range of manufacturing aftermarket applications in the range by itsgauges commitment to innovative and constant product improvement. and Diager manufacture an extensive automotive, electronics, shipbuilding, and transportation industries. of premium aerospace, high end tungsten carbide, masonrydefense, cuttingpower-generation tools for the Construction Industry.

recoil contents Thread Repair Kits.........................................................168 - 171

Keyserts..........................................................................177 - 179

Range Kits.................................................................................171

Taps................................................................................. 179 - 186

Pro Series Thread Repair Kits.......................................171 - 172

Keysert Installation & Removal........................................... 187

Thread Insert Packs......................................................172 - 176

How to Install Recoil Inserts...............................................188

Ensat Tappers.................................................................176 - 177

RECOIL

Offering a broad selection of sizes, materials, finishes and coatings, recoil inserts are manufactured in all of the popular thread forms and in accordance with the worldâ&#x20AC;&#x2122;s most stringent quality standards.

168

THREAD REPAIR KITS

Item No.

DESCRIPTION

THREAD REPAIR KITS

RECOIL

THREAD REPAIR KITS

THREAD REPAIR KIT METRIC COARSE

RE35020 RE35010 RE35250 RE35030 RE35350 RE35040 RE35050 RE35060 RE35070 RE35080 RE35090 RE35100 RE35110 RE35120 RE35130 RE35140 RE35150 RE35160 RE35180 RE35200 RE35220 RE35240 RE35270 RE35300 RE35300-3 RE35330 RE35360 RE35390 RE35420 RE35420-4

Recoil Kit M2X0.4 Recoil Kit M2.2-0.45 Recoil Kit M2.5X0.45 Recoil Kit M3X0.5 Recoil Kit M3.5X0.6 Recoil Kit M4X0.7 Recoil Kit M5X0.8 Recoil Kit M6X1 Recoil Kit M7X1 Recoil Kit M8X1.25 Recoil Kit M9X1.25 Recoil Kit M10X1.50 Recoil Kit M11X1.5 Recoil Kit M12X1.75 Recoil Kit M13-1.75 Recoil Kit M14X2 Recoil Kit M15X2 Recoil Kit M16X2 Recoil Kit M18X2.5 Recoil Kit M20X2.5 Recoil Kit M22X2.5 Recoil Kit M24X3 Recoil Kit M27-3 Recoil Kit M30X3.5 Recoil Kit M30X3.0 Recoil Kit M33-3.5 Recoil Kit M36-4 Recoil Kit M39-4 Recoil Kit M42-4.5 Recoil Kit M42-4

THREAD REPAIR KIT METRIC FINE

RE37080 RE37090 RE37100 RE37110 RE37120 RE37130 RE37140 RE37160 RE37180 RE37200 RE37220 RE37240 RE37300

Recoil Kit M8X1 Recoil Kit M9X1 Recoil Kit M10X1.25 Recoil Kit M11X1.25 Recoil Kit M12X1.5 Recoil Kit M13X1.5 Recoil Kit M14X1.5 Recoil Kit M16X1.5 Recoil Kit M18X2 Recoil Kit M20X2 Recoil Kit M22-2 Recoil Kit M24X2 Recoil Kit M30X2

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

169

THREAD REPAIR KITS

Item No.

DESCRIPTION

Recoil Kit M10X1 Recoil Kit M11X1 Recoil Kit M12X1.25 Recoil Kit M12X1 Recoil Kit M13 X 1.25 Recoil Kit M14X1.25 Std Recoil Kit M18X1.5 Recoil Kit M20X1.5 Recoil Kit M22X1.5 Recoil Kit M24X1.5 Recoil Kit M26X1.5 (Non-Stock)

THREAD REPAIR KIT UNC

RE33520 RE33530 RE33540 RE33550 RE33560 RE33580 RE33600 RE33620 RE33040 RE33050 RE33060 RE33070 RE33080 RE33090 RE33100 RE33110 RE33120 RE33140 RE33160 RE33180 RE33200 RE33220 RE33240

Recoil Kit Unc #2-56 Recoil Kit Unc #3-48 Recoil Kit Unc #4-40 Recoil Kit Unc #5-40 Recoil Kit Unc #6-32 Recoil Kit Unc #8-32 Recoil Kit Unc #10-24 Recoil Kit Unc #12-24 Recoil Kit Unc 1/4-20 Recoil Kit Unc 5/16-18 Recoil Kit Unc 3/8-16 Recoil Kit Unc 7/16-14 Recoil Kit Unc 1/2-13 Recoil Kit Unc 9/16-12 Recoil Kit Unc 5/8-11 Recoil Kit Unc 11/16-11 Recoil Kit Unc 3/4-10 Recoil Kit Unc 7/8-9 Recoil Kit Unc 1"-8 Recoil Kit Unc 1-1/8 Recoil Kit Unc 1.1/4-7 Recoil Kit Unc 1.3/8-6 Recoil Kit Unc 1.1/2 - 6

THREAD REPAIR KIT UNF

RE34530 RE34540 RE34560 RE34580 RE34600 RE34620 RE34040 RE34050 RE34060 RE34070 RE34080

Recoil Kit Unf #3-56 Recoil Kit Unf #4-48 Recoil Kit Unf #6-40 Recoil Kit Unf #8-36 Recoil Kit Unf #10-32(3/16) Recoil Kit Unf #12-28 Recoil Kit Unf 1/4-28 Recoil Kit Unf 5/16-24 Recoil Kit Unf 3/8-24 Recoil Kit Unf 7/16-20 Recoil Kit Unf 1/2-20

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

RE38101 RE38110 RE38121 RE38120-1 RE38130 RE38141 RE38181 RE38200 RE38220 RE38240 RE38260

THREAD REPAIR KITS

THREAD REPAIR KIT METRIC EXTRA FINE

170

RECOIL

THREAD REPAIR KITS

Item No.

DESCRIPTION

RE34090 RE34100 RE34120 RE34140 RE34160 RE34160-14 RE34180 RE34200 RE34220

Recoil Kit Unf 9/16-18 Recoil Kit Unf 5/8-18 Recoil Kit Unf 3/4-16 Recoil Kit Unf 7/8-14 Recoil Kit Unf 1"-12 Recoil Kit Uns 1"-14 Recoil Kit Unf 1-1/8-12 Recoil Kit Unf 1.1/4 Recoil Kit Unf 1-3/8-12

THREAD REPAIR KIT BSW

RE32030 RE32040 RE32050 RE32060 RE32070 RE32080 RE32090 RE32100 RE32120 RE32140 RE32160 RE32200

Recoil Kit Bsw 3/16-24(.187) Recoil Kit Bsw 1/4-20(.250) Recoil Kit Bsw 5/16-18 Recoil Kit Bsw 3/8-16 Recoil Kit Bsw 7/16-14 Recoil Kit Bsw 1/2-12 Recoil Kit Bsw 9/16-12 Recoil Kit Bsw 5/8-11 Recoil Kit Bsw 3/4-10 Recoil Kit Bsw 7/8-9 Recoil Kit Bsw 1-8 Recoil Kit Bsw 1 1/4-7

THREAD REPAIR KIT BSF

RE30030 RE30040 RE30050 RE30060 RE30070 RE30080 RE30090 RE30100 RE30120 RE30140

Recoil Kit Bsf 3/16-32 Recoil Kit Bsf 1/4-26 Recoil Kit Bsf 5/16-22 Recoil Kit Bsf 3/8-20 Recoil Kit Bsf 7/16-18 Recoil Kit Bsf 1/2-16 Recoil Kit Bsf 9/16-16 Recoil Kit Bsf 5/8-14 Recoil Kit Bsf 3/4-12 Recoil Kit Bsf 7/8-11

THREAD REPAIR KIT BA

RE30520 RE30540 RE30560

Recoil Kit 2Ba Recoil Kit 4Ba Recoil Kit 6Ba

THREAD REPAIR KIT 8 TPI UN

RE36220 RE36280

Recoil Kit Un 1.3/8-8 Recoil 1-3/4-8 Un Kit

THREAD REPAIR KIT BSP

RE31020 RE31040 RE31060 RE31080 RE31100 RE31120

Recoil Kit Bsp 1/8-28 Recoil Kit Bsp 1/4-19 Recoil Kit Bsp 3/8-19 Recoil Kit Bsp 1/2-14 Recoil Kit Bsp 5/8-14 Recoil Kit Bsp 3/4-14

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

171

THREAD REPAIR, RANGE & PRO SERIES KITS

Item No.

DESCRIPTION

RE31160

Recoil Kit Bsp 1-11 Recoil 1/4-32 Unef Kit

THREAD REPAIR KIT BSC / BRASS

RE36500 RE36600 RE36700 RE36800

Recoil Kit Bsc 5/16-26 Recoil Kit Bsc 3/8-26 Recoil Kit Bsc 7/16-26 Recoil Kit Bsc 1/2X26

THREAD REPAIR KIT NPT

RE36020 RE36040 RE36060 RE36080

Recoil Kit Npt 1/8-27 Recoil Kit Npt 1/4-18 Recoil Kit Npt 3/8-18 Recoil Kit Npt 1/2-14

THREAD REPAIR KIT SPARKPLUG METRIC

RE38100 Recoil Kit M10X1 Spark Plug RE38120 Recoil Kit M12X1.25 Spark Plug RE38140 Recoil Kit M14X1.25 Spark Plug *Contains 5 x 3/4" and 3/8" s/plug inserts & includes extracting tool in large tin RE38142 Recoil Kit M14X1.25 Spark Plug Contains 5 x 3/4" and 3/8" s/plug inserts RE38180 Recoil Kit M18X1.5 Spark Plug RE38147 Recoil Kit M14X1.25 S/Plug Met THREAD REPAIR KIT PLUGSAVER

RE38148

Recoil Plugsaver Repair Kit

RANGE KITS POPULAR SIZES

RE34004 RE35003 RE35004 RE35005 RE33004

Recoil Range Kit Unf 1/4-1/2 Recoil Metric Kit M4,5,6,8,10 Recoil Range Kit M5-M12 Recoil Range Kit M6-M16 Recoil Range Kit Unc 1/4 -1/2

RANGE KITS METRIC

RE37004 RE38006 RE38007

Recoil Range Kit M4-M12 Recoil Range Kit M/C M6-M14 Recoil Range Kit O/P/E M5 -M14

MINI RANGE KITS - INCH

RE33001 RE34001

Recoil Range Kit Unc 1/4-3/8 Recoil Range Kit Unf 1/4-3/8

MINIRANGE KITS - METRIC

RE37002

Recoil Mini Range Kit M6-M10

PRO SERIES THREAD REPAIR KITS PRO SERIES METRIC COARSE

RE35036 RE35356 RE35046 RE35056 RE35066 RE35076

Recoil Pro Kit M3X0.5 Recoil Pro Kit M3.5X0.6 Recoil Pro Kit M4X0.7 Recoil Pro Kit M5X0.8 Recoil Pro Kit M6X1 Recoil Pro Kit M7X1

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

RE34040-32

THREAD REPAIR KITS ETC

THREAD REPAIR KIT SPECIAL SIZES

172

RECOIL

PRO SERIES - THREAD REPAIR KITS

PRO SERIES-thread repAIr kitS & THREAD INSERTS

Item No.

DESCRIPTION

RE35086 RE35096 RE35106 RE35116 RE35126 RE35166

Recoil Pro Kit M8X1.25 Recoil Pro Kit M9X1.25 Recoil Pro Kit M10X1.50 Recoil Pro Kit M11X1.50 Recoil Pro Kit M12X1.75 Recoil Pro Kit M16X2

PRO SERIES METRIC MEDIUM

RE37086 RE37106 RE37126

Recoil Pro Kit M8X1 Recoil Pro Kit M10X1.25 Recoil Pro Kit M12X1.5

PRO SERIES UNC

RE33546 RE33556 RE33566 RE33586 RE33606 RE33046 RE33056 RE33066 RE33076 RE33086 RE33626

Recoil Pro Kit Unc #4-40 Recoil Pro Kit Unc #5-40 Recoil Pro Kit Unc #6-32 Recoil Pro Kit Unc #8-32 Recoil Pro Kit Unc #10-24 Recoil Pro Kit Unc 1/4-20 Recoil Pro Kit Unc 5/16-18 Recoil Pro Kit Unc 3/8-16 Recoil Pro Kit Unc 7/16-14 Recoil Pro Kit Unc 1/2-13 Recoil Pro Kit Unc #12-24

PRO SERIES UNF

RE34566 RE34586 RE34606 RE34046 RE34056 RE34066 RE34076 RE34086

Recoil Pro Kit Unf #6-40 Recoil Pro Kit Unf #8-36 Recoil Pro Kit Unf #10-32 Recoil Pro Kit Unf 1/4-28 Recoil Pro Kit Unf 5/16-24 Recoil Pro Kit Unf 3/8-24 Recoil Pro Kit Unf 7/16-20 Recoil Pro Kit Unf 1/2-20

THREAD INSERT PACKS THREAD INSERT PACKS METRIC COARSE

RE25022 RE25023 RE25024 RE25013 RE25253 RE25032 RE25033 RE25034 RE25353 RE25042 RE25043 RE25044 RE25052 RE25053

Recoil Insert M2-0.4 X 1D Recoil Insert M2X0.4X1.5D Recoil Insert M2-0.4 X 2D Recoil Insert M2.2-.45X1.5D Recoil Insert M2.5-.45X1.5D Recoil Insert M3X0.5X1D Recoil Insert M3X0.5X1.5D Recoil Insert M3X0.5X2D Recoil Insert M3.5X0.6X1.5D Recoil Insert M4X0.7X1D Recoil Insert M4X0.7X1.5D Recoil Insert M4X0.7X2D Recoil Insert M5X0.8X1D Recoil Insert M5X0.8X1.5D

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

173

DESCRIPTION

RE25054 RE25062 RE25063 RE25064 RE25065 RE25073 RE25082 RE25083 RE25084 RE25085 RE25093 RE25102 RE25103 RE25104 RE25105 RE25113 RE25122 RE25123 RE25124 RE25133 RE25142 RE25143 RE25144 RE25153 RE25162 RE25163 RE25164 RE25165 RE25182 RE25183 RE25203 RE25223 RE25243 RE25303

Recoil Insert M5X0.8X2D Recoil Insert M6X1X1D Recoil Insert M6X1X1.5D Recoil Insert M6X1X2D Recoil Insert M6-1.0 X 2.5D Recoil Insert M7X1X1.5D Recoil Insert M8X1.25X1D Recoil Insert M8X1.25X1.5D Recoil Insert M8-1.25 X 2D Recoil Insert M8-1.25 X 2.5D Recoil Insert M9-1.25X1.5D Recoil Insert M10-1.5 X 1D Recoil Insert M10X1.5X1.5D Recoil Insert M10X1.5X2D Recoil Insert M10-1.5 X 2.5D Recoil Insert M11-1.5X1.5D Recoil Insert M12-1.75 X 1D Recoil Insert M12X1.75X1.5D Recoil Insert M12-1.75 X 2D Recoil Insert M13-1.75X1.5D Recoil Insert M14-2 X 1D Recoil Insert M14X2X1.5D Recoil Insert M14-2 X 2D Recoil Insert M15-2X1.5D Recoil Insert M16-2 X 1D Recoil Insert M16X2X1.5D Recoil Insert M16-2 X 2D Recoil Insert M16-2 X 2.5D Recoil Insert M18-2.5 X 1D Recoil Insert M18X2.5X1.5D Recoil Insert M20X2.5X1.5D Recoil Insert M22-2.5X1.5D Recoil Insert M24-3X1.5D Recoil Insert M30-3.5X1.5D

THREAD INSERT PACKS METRIC MEDIUM

RE27082 RE27083 RE27084 RE27102 RE27103 RE27104 RE27106 RE27113 RE27122 RE27123 RE27124 RE27133

Recoil Insert M8-1 X 1D Recoil Insert M8X1X1.5D Recoil Insert M8-1 X 2D Recoil Insert M10-1.25 X 1D Recoil Insert M10X1.25X1.5D Recoil Insert M10-1.25 X 2D Recoil Insert M10-1.25 X 3D Recoil Insert M11-1.25X1.5D Recoil Insert M12-1.5 X 1D Recoil Insert M12X1.5X1.5D Recoil Insert M12-1.5 X 2D Recoil Insert M13-1.5X1.5D

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

Item No.

THREAD INSERT PACKS

THREAD insert packs

174

RECOIL

THREAD INSERT PACKS

Item No.

DESCRIPTION

RE27143 RE27144 RE27153 RE27162 RE27163 RE27165 RE27183 RE27203 RE27223 RE27243

Recoil Insert M14X1.5X1.5D Recoil Insert M14-1.5 X 2D Recoil Insert M15-1.5X1.5D Recoil Insert M16-1.5 X 1D Recoil Insert M16X1.5X1.5D Recoil Insert M16-1.5 X 2.5D Recoil Insert M18-2X1.5D Recoil Insert M20-2X1.5D Recoil Insert M22X2X1.5D Recoil Insert M24-2X1.5D

THREAD INSERT PACKS METRIC EXTRA FINE

RE28113 RE28122 RE28123 RE28124 RE28133 RE28183 RE28203 RE28223 RE28243

Recoil Insert M11X1X1.5D Recoil Insert M12X1.25X1/2 Recoil Insert M12X1.25X1.5D Recoil Insert M12-1.25 X 2D Recoil Insert M13-1.25X1.5D Recoil Insert M18X1.5X1.5D Recoil Insert M20-1.5X1.5D Recoil Insert M22-1.5X1.5D Recoil Insert M24-1.5X1.5D

THREAD INSERT PACKS UNC

RE23043 RE23053 RE23063 RE23073 RE23083 RE23084 RE23093 RE23102 RE23103 RE23113 RE23123 RE23163 RE23183 RE23203 RE23223 RE23243 RE23523 RE23533 RE23543 RE23553 RE23563 RE23583 RE23603 RE23623

Recoil Insert Unc 1/4-20X1.5D Recoil Insert Unc 5/16-18X1.5D Recoil Insert Unc 3/8-16X1.5D Recoil Insert Unc 7/16-14X1.5D Recoil Insert Unc 1/2-13X1.5D Recoil Insert Unc 1/2-13 X 2D Recoil Insert Unc 9/16-12X1.5D Recoil Insert Unc 5/8-11X1D Recoil Insert Unc 5/8-11X1.5D Recoil Insert Unc11/16-11X1.5D Recoil Insert Unc 3/4-10X1.5D Recoil Insert Unc 1"-8X1.5D Recoil Insert Unc 1.1/8-7X1.5D Recoil Insert Unc 1.1/4-7X1.5D Recoil Insert Unc 1.3/8-6X1.5D Recoil Insert Unc 1.1/2-6X1.5D Recoil Insert Unc 2-56 X 1.5D Recoil Insert Unc 3-48 X 1.5D Recoil Insert Unc 4-40 X 1.5D Recoil Insert Unc 5-40 X 1.5D Recoil Insert Unc 6-32 X 1.5D Recoil Insert Unc 8-32 X 1.5D Recoil Insert Unc 10-24X1.5D Recoil Insert Unc 12-24X1.5D

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

175

THREAD INSERT PACKS

Item No.

DESCRIPTION

Recoil Insert Unf 1/4-28X1.5D Recoil Insert Unf 5/16-24X1.5D Recoil Insert Unf 5/16-24 X 2D Recoil Insert Unf 3/8-24X1.5D Recoil Insert Unf 7/16-20X1.5D Recoil Insert Un 7/16-16X1.5D Recoil Insert Unf 1/2-20X1.5D Recoil Insert Unf 9/16-18X1.5D Recoil Insert Unf 5/8-18 Recoil Insert Unf 3/4-16X1.5D Recoil Insert Unf 7/8-14X1.5D Recoil Insert Unf 1-12X1.5D Recoil Insert Uns 1-14 Recoil Insrt Unf 1.1/8-12X1.5D Recoil Insrt Unf 1.1/4-12X1.5D Recoil Insrt Unf 1.3/8-12X1.5D Recoil Insrt Unf 1.1/2-12X1.5D Recoil Insert Unf 3-56X1.5D Recoil Insert Unf 4-48X1.5D Recoil Insert Unf 6-40X1.5D Recoil Insert Unf 8-36X1.5D Recoil Insert Unf 10-32X1.5D Recoil Insert Unf 12-28X1.5D

THREAD INSERT PACKS BSF

RE20053 RE20063 RE20073 RE20083

Recoil Insert Bsf 5/16-22X1.5D Recoil Insert Bsf 3/8-20X1.5D Recoil Insert Bsf 7/16-18X1.5D Recoil Insert Bsf 1/2-16X1.5D

THREAD INSERT PACKS BA

RE20523 RE20543 RE20563

Recoil Insert 2Ba X 1.5D Recoil Insert 4Ba X 1.5D Recoil Inserts 6Bax1.5D

THREAD INSERT PACKS BSP

RE21023 RE21043 RE21063 RE21083 RE21103 RE21123 RE21163

Recoil Insert Bsp 1/8-28X1.5D Recoil Insert Bsp 1/4-19X1.5D Recoil Insert Bsp 3/8-19X1.5D Recoil Insert Bsp 1/2-14X1.5D Recoil Insert Bsp 5/8-14X1.5D Recoil Insert Bsp 3/4-14X1.5D Recoil Insert Bsp 1-11X1.5D

THREAD INSERT PACKS BSW

RE22023 RE22033 RE22043 RE22053 RE22063

Recoil Insert Bsw 1/8-40X1.5D Recoil Insert Bsw 3/16-24X1.5D Recoil Insert Bsw 1/4-20X1.5D Recoil Insert Bsw 5/16-18X1.5D Recoil Insert Bsw 3/8-16X1.5D

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

RE24043 RE24053 RE24054 RE24063 RE24073 RE24073-16 RE24083 RE24093 RE24103 RE24123 RE24143 RE24163 RE24163-14 RE24183 RE24203 RE24223 RE24243 RE24533 RE24543 RE24563 RE24583 RE24603 RE24623

THREAD INSERT PACKS

THREAD INSERT PACKS UNF

176

RECOIL

THREAD INSERT PACKS & ENSAT TAPPERS

Item No.

DESCRIPTION

RE22073 RE22083

Recoil Insert Bsw 7/16-14X1.5D Recoil Insert Bsw 1/2-12X1.5D

THREAD INSERT PACKS NPT

RE26023 RE26043 RE26063 RE26083

Recoil Insert Npt 1/8-17X1.5D Recoil Insert Npt 1/4-18X1.5D Recoil Insert Npt 3/8-18X1.5D Recoil Insert Npt 1/2-14X1.5D

THREAD INSERT PACKS BSC

RE26503 RE26603 RE26703 RE26803

Recoil Insert Bsc 5/16-26X1.5D Recoil Insert Bsc 3/8-26X1.5D Recoil Insert Bsc 7/16-26X1.5D Recoil Insert Bsc 1/2-26X1.5D

THREAD INSERT PACKS SPARKPLUG

RE28103 RE28140 RE28148 RE28149

Recoil Insert M10X1X1.5D Recoil Insert M14X1.25X3/4" Recoil Insert M14X1.25X3/8 Recoil Insert M14X1.25X1/2

EXTRACTING TOOLS

RE50002 RE50003 RE50004 RE50005

Xtract Tool 3/16-3/8,M5-M10 Xtract Tool 3/16-1",M5-M24 Xtract Tool 1 1/8"-1 1/2" Xtract Tool M38-M65

ENSAT TAPPERS - SELF CUTTING THREADED INSERTS STEEL, CASE HARDENED

RE3020030/16 RE3020040/16 RE3020050/16 RE3020060/16 RE3020061/16 RE3020100/16 RE3020106/16 RE3020120/16 RE3020127/16 RE3020140/16 RE3020160/16 RE3020200/16 RE3020080/16 RE3020608/16 RE3020625/16 RE3020631/16 RE3020637/16 RE3020644/16 RE3020650/16 RE3020662/16 RE3020725/16 RE3020731/16 RE3020737/16

Ensat Tapper Insert M3-0.5 Ensat Tapper Insert M4-0.7 Ensat Tapper Insert M5-0.8 Ensat Tapper Insert M6-1.0 Ensat Tapper Insert M6(A)-1 Ensat Tapper Insert M10-1.5 Ensat Tapper Insert M10-1.25 Ensat Tapper Insert M12-1.75 Ensat Tapper Insert M12X1.5 Ensat Tapper Insert M14-2.0 Ensat Tapper Insert M16-2.0 Ensat Tapper Insert M20-2.5 Ensat Tapper Insert M8-1.25 Ensat Tapper Insert Unc No 8 Ensat Tapper Insert Unc 1/4 Ensat Tapper Insert Unc 5/16 Ensat Tapper Insert Unc 3/8 Ensat Tapper Insert Unc 7/16 Ensat Tapper Insert Unc 1/2 Ensat Tapper Insert 5/8 Unc Ensat Tapper Insert Unf 1/4 Ensat Tapper Insert Unf 5/16 Ensat Tapper Insert Unf 3/8

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

177

DESCRIPTION

RE3020744/16 RE3020750/16 RE3020762/16 RE3040140/16 RE3040141/16

Ensat Tapper Insert Unf 7/16 Ensat Tapper Insert Unf 1/2 Ensat Tapper Insert Unf 5/8 Ensat Tapper M14-1.25 X 9 Mm Sprk Plug Only Ensat Tapper M14-1.25 X 15 Mm

STAINLES STEEL GRADE 304

RE3020030/40 RE3020040/40 RE3020050/40 RE3020060/40 RE3020080/40 RE3020100/40 RE3020120/40

Ensat Tapper S/Steel M3-0.5 Ensat Tapper S/Steel M4-07 Ensat Tapper S/Steel M5-0.8 Ensat Tapper S/Steel M6-1.0 Ensat Tapper S/Steel M8X1.25 Ensat Tapper S/Steel M10X1.5 Ensat Tapper S/Steel M12-1.75

KEYSERTS METRIC* THINWALL - INCH SERIES - CARBON STEEL

REK75042 REK75047 REK75051P REK75052 REK75056 REK75056P REK75057 REK75061 REK75061P REK75062 REK75066 REK75066P REK75067 REK75081 REK75081P REK75082 REK75086 REK75086P REK75087 REK75101 REK75101P REK75102 REK75106 REK75106P REK75107 REK75121 REK75121P REK75122 REK75126 REK75126P REK75142 REK75147

Keysert M4X0.7 C/S H.D. Keysert M4X0.7 S/S H.D. Keysert M5-0.8 Thinwall Keysert M5 X 0.8 C/S H.D. Keysert M5X0.8 S/S Thin Keysert M5-0.8 S/S Thinwall Keysert M5X0.8 S/S H.D. Keysert M6X1 C/S Thin Keysert M6-1 Thinwall Keysert M6X1 C/S H.D. Keysert M6X1 S/S Thin Keysert M6-1 S/S Thinwall Keysert M6 X 1 S/S H.D. Keysert M8-1.25 Thinwall C/S Keysert M8-1.25 Thinwall Keysert M8X1.25 C/S H.D. Keysert M8X1.25 S/S Thin Keysert M8-1.25 S/S Thinwall Keysert M8-1.25 S/S H.D. Keysert M10X1.5 C/S Thin Keysert M10-1.5 Thinwall C/S Keysert M10X1.5 C/S H.D. Keysert M10X1.5 S/S Thin Keysert M10-1.5 S/S Thinwall Keysert M10X1.5 S/S H.D. Keysert M12X1.75 C/S Thin Keysert M12-1.75 Thinwall Keysert M12-1.75 C/S H.D. Keysert M12-1.75 S/S Thinwall Keysert M12-1.75 S/S Thinwall Keysert M14X2 C/S H.D. Keysert M14X2 S/S H.D.

*All item numbers that end with a P come in various packet sizes.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

Item No.

ENSAT TAPPERS & KEYSERTS

178

KEYSERTS

RECOIL

KEYSERTS

Item No.

DESCRIPTION

REK75162 REK75167 REK75202 REK75242 REK77101P REK77102 REK77106 REK77142 REK77162 REK78121P REK78126 REK78182 REK78202

Keysert M16X2 C/S H.D Keysert M16-2 S/S H.D. Keysert M20X2.5 C/S H.D. Keysert M24X3 C/S H.D. Keysert M10-1.25 Thinwall Keysert M10 - 1.25 C/S H.D Keysert M10-1.25 S/S Thinwall Keysert M14-1.5 C/S H.D. Keysert M16 X 1.5 C/S H.D. Keysert M12-1.25 Thinwall Keysert M12-1.25 S/S Thinwall Keysert M18X1.5 C/S H.D. Keysert M20X1.5 C/S H.D.

KEYSERTS UNC

REK73041P REK73042 REK73046 REK73046P REK73047 REK73051P REK73056P REK73061P REK73062 REK73066P REK73067 REK73071P REK73072 REK73076 REK73081P REK73082 REK73086P REK73097 REK73107 REK73122 REK73142 REK73162 REK73582 REK73587 REK73601 REK73601P REK73606

Keysert Unc 1/4-20 Thinwall Keysert Unc 1/4-20 C/S H.D. Keysert Unc 1/4-20 S/S Thin Keysert Unc 1/4-20 S/S Thin Keysert Unc 1/4-20 S/S H.D. Keysert Unc 5/16-18 Thinwall Keysert Unc 5/16-18 S/S Thin Keysert Unc 3/8-16 Thinwall Keysert Unc 3/8-16 C/S H.D. Keysert Unc 3/8-16 S/S Thin Keysert Unc 3/8-16 S/S H.D. Keysert Unc 7/16-14 Thinwall Keysert Unc 7/16 Car H.D. Keysert Ea 7/16-20 S/S Thinwal Keysert Unc 1/2-13 Thinwall Keysert Unc 1/2-13 C/S H.D. Recoil 1/2"Unc Keyserts Keysert Ea Unc 9/16-12 Ss Hd Keysert Ea Unc 5/8-11 S/S H.D. Keysert Unc 3/4-10 C/S H.D. Keysert Unc 7/8-9 C/S H.D. Keysert Unc 1-8 C/S H.D. Keysert Unc 8-32 C/S H.D. Keysert Unc 8-32 S/S H.D. Keysert 10-24 Thinwall Carbon Keysert 10-24 Thinwall Carbon Recoil Unc 10-24 S/S Thin

KEYSERTS UNF

REK74041P REK74046 REK74051P REK74052 REK74056P

Keysert Unf 1/4-28 Thinwall Keysert Unf 1/4 -28 S/S Thin Keysert Unf 5/16-24 Thinwall Keysert Unf 5/16-24 C/S H.D Keysert Unf 5/16-24 S/S Thin

*All item numbers that end with a P come in various packet sizes.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

179

DESCRIPTION

REK74061P REK74066 REK74071P REK74081P REK74086 REK74092 REK74102 REK74107 REK74122 REK74142 REK74162 REK74162-14 REK74601P REK74606 REK74606P

Keysert Unf 3/8-24 Thinwall Keysert Unf 3/8-24 S/S Thin Keysert Unf 7/16-20 Thinwall Keysert Unf 1/2-20 Thinwall Keysert Unf 1/2-20 S/S Thin Keysert Unf 9/16-18 C/S H.D Keysert Unf 5/8-18 C/S H.D. Keysert Ea Unf 5/8-18 S/S H.D. Keysert Unf 3/4-16 C/S H.D. Keysert Unf 7/8-14 C/S H.D. Keysert Unf 1-12 C/S H.D. Keysert Unf 1-14 C/S H.D. Keysert Unf 10-32 Thinwall Keysert Unf 10-32 S/S Thin Keysert Unf 10-32 S/S Thin

KEYSERT TOOLS

REK71042 REK72250 REK72312 REK72375 REK72500 REK72625 REK72875

Keysert Tool M4 X 0.7 Keysert Tool 1/4,M6 Keysert Tool 5/16,M8 Keysert Tool 3/8,7/16,M10 Keysert Tool 1/2,9/16,M12 Keysert Tool 5/8,M16 Keysert Tool M20 X 2.5

TAPS TAPS METRIC COARSE

RE45025 RE45026 RE45014 RE45254 RE45255 RE45256 RE45034 RE45035 RE45036 RE45355 RE45044 RE45045 RE45046 RE45054 RE45055 RE45056 RE45064 RE45065 RE45066 RE45074 RE45075 RE45076

Recoil Tap M2-0.4 Inter Recoil Tap M2-0.4 Bottom Recoil Tap M2.2 - 0.45 Taper Recoil Tap M2.5 - 0.45 Taper Recoil Tap M2.5X0.45 Inter Recoil Tap M2.5X0.45 Bottom Recoil Tap M3X0.5 Taper Recoil Tap M3X0.5 Inter Recoil Tap M3X0.5 Bottom Recoil Tap M3.5X0.6 Inter Recoil Tap M4X0.7 Taper Recoil Tap M4X0.7 Inter Recoil Tap M4X0.7 Bottom Recoil Tap M5X0.8 Taper Recoil Tap M5X0.8 Inter Recoil Tap M5X0.8 Bottom Recoil Tap M6X1 Taper Recoil Tap M6X1 Inter Recoil Tap M6X1 Bottom Recoil Tap M7X1 Taper Recoil Tap M7X1 Inter Recoil Tap M7X1 Bottom

*All item numbers that end with a P come in various packet sizes.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

RECOIL

Item No.

KEYSERTS, KEYSERT TOOLS & TAPS

180

TAPS

RECOIL

TAPS

Item No.

DESCRIPTION

RE45084 RE45085 RE45086 RE45095 RE45104 RE45105 RE45106 RE45107 RE45115 RE47084 RE47085 RE47104 RE47105 RE47106 RE47107 RE47115 RE47116 RE48104 RE48105 RE48106 RE48107 RE45124 RE45125 RE45126 RE45144 RE45145 RE45146 RE45155 RE45164 RE45165 RE45166 RE45204 RE45205 RE45206 RE45225 RE45245 RE45246 RE45304 RE45305 RE45306 RE45305-3 RE45335 RE45365 RE45395 RE47124 RE47125 RE47126

Recoil Tap M8X1.25 Taper Recoil Tap M8X1.25 Inter Recoil Tap M8X1.25 Bottom Recoil Tap M9X1.25 Inter Recoil Tap M10X1.5 Taper Recoil Tap M10X1.5 Inter Recoil Tap M10X1.5 Bottom Recoil Tap M10 X 1.5 P/Nose Recoil Tap M11X1.5 Int Recoil Tap M8X1 Taper Recoil Tap M8X1 Inter Recoil Tap M10X1.25 Taper Recoil Tap M10X1.25 Inter Recoil Tap M10X1.25 Bottom Recoil Tap M10X1.25 Pilot Nose Recoil Tap M11 X 1.25 Inter Recoil Tap M11X1.25 Bott Recoil Tap M10X1 Taper Recoil Tap M10X1 Inter Recoil Tap M10X1 Bottom Recoil Tap M10X1 Pilot Nose Recoil Tap M12X1.75 Taper Recoil Tap M12X1.75 Inter Recoil Tap M12 - 1.75 Bottom Recoil Tap M14X2 Taper Recoil Tap M14X2 Inter Recoil Tap M14X2 Bottom Recoil Tap M15 X 2 Inter Recoil Tap M16X2 Taper Recoil Tap M16X2 Inter Recoil Tap M16X2 Bottom Recoil Tap M20X2.5 Taper Recoil Tap M20X2.5 Inter Recoil Tap M20X2.5 Bottom Recoil Tap M22X2.5 Inter Recoil M24-3 Intermediate Tap Recoil Tap M24X3 Bottom Recoil Tap M30X3.5 Taper Recoil Tap M30X3.5 Inter Recoil Tap M30X3.5 Bottom Recoil Tap M30-3 Inter Recoil Tap M33-3.5 Inter Recoil Tap M36-4 Inter Recoil Tap M39X4 Inter Recoil Tap M12X1.5 Taper Recoil Tap M12X1.5 Inter Recoil Tap M12X1.5 Bottom

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

181

DESCRIPTION

RE47144 RE47145 RE47146 RE47164 RE47165 RE47166 RE47186 RE47244 RE47245 RE47365 RE47395 RE47425 RE48124 RE48125 RE48126 RE48127 RE48144 RE48145 RE48146 RE48147 RE48184 RE48185 RE48204 RE48205 RE48206 RE48225 RE48245 RE48265 RE48305 RE45029 RE45039 RE45049 RE45059 RE45069 RE45089 RE45109 RE45129 RE45169 RE45209 RE45249

Recoil Tap M14X1.5 Taper Recoil Tap M14X1.5 Inter Recoil Tap M14X1.5 Bottom Recoil Tap M16X1.5 Taper Recoil Tap M16X1.5 Inter Recoil Tap M16X1.5 Bott Recoil Tap M18X2.0 Bottom Recoil Tap M24X2 Taper Recoil M24X2 Int Tap Recoil Tap M36-3 Inter Recoil Tap M39-3 Inter Recoil Tap M42-3 Inter Recoil Tap M12X1.25 Taper Recoil Tap M12X1.25 Inter Recoil Tap M12X1.25 Bottom Recoil Tap M12X1.25 Pilot/Nose Recoil Tap M14X1.25 Taper Recoil Tap M14X1.25 Inter Recoil Tap M14X1.25 Bottom Recoil Tap M14X1.25 Pilot/Nose Recoil Tap M18 X 1.5 Taper Recoil Tap M18X1.5 Inter Recoil Tap M20X1.5 Taper Recoil Tap M20X1.5 Inter Recoil Tap M20X1.5 Bottom Recoil Tap M22X1.5 Inter Recoil Tap M24X1.5 Inter Recoil Tap M26X1.5 Inter Recoil Tap M30X1.5 Inter Recoil Tap M2-0.4 Spir/Flute Recoil Tap M3X.5 Spiral Flute Recoil Tap M4X0.7 Spiral Flute Recoil Tap M5X0.8 Spiral Flute Recoil Tap M6-1 Spiral Flute Recoil Tap M8-1.25 Spirl/Flute Recoil Tap M10-1.5 Spirl/Flute Recoil Tap M12-1.75 Spir/Flute Recoil Tap M16X2 Spiral Flute Recoil Tap M20X2.5 Spiral Flut Recoil Tap M24X3 Spiral Flute

TAPS UNC

RE43525 RE43536 RE43544 RE43545 RE43546 RE43555

Recoil Tap Unc 2-56 Inter Recoil Tap 3-48 Unc Bottg Recoil Tap Unc 4-40 Taper Recoil Tap Unc 4-40 Inter Recoil Tap Unc 4-40 Bot Recoil Tap 5-40Unc Int

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

Item No.

RECOIL

TAPS

182

TAPS

RECOIL

TAPS

Item No.

DESCRIPTION

RE43564 RE43565 RE43566 RE43584 RE43585 RE43586 RE43604 RE43605 RE43606 RE43044 RE43045 RE43046 RE43054 RE43055 RE43056 RE43064 RE43065 RE43066 RE43074 RE43075 RE43076 RE43084 RE43085 RE43086 RE43095 RE43096 RE43104 RE43105 RE43106 RE43115 RE43124 RE43125 RE43126 RE43145 RE43146 RE43164 RE43165 RE43166 RE43205 RE43244 RE43245 RE43549 RE43568 RE43569 RE43588 RE43589 RE43609

Recoil Tap Unc 6-32 Taper Recoil Tap Unc 6-32 Recoil Tap Unc 6-32 Bott Recoil Tap Unc 8-32{5/32}Taper Recoil Tap Unc 8-32{5/32}Inter Recoil Tap Unc 8-32{5/32} Bo Recoil Tap Unc #10-24Taper Recoil Tap Unc #10-24 Inter Recoil Tap Unc #10-24 Bot Recoil Tap Unc 1/4-20 Taper Recoil Tap Unc 1/4-20 Inter Recoil Tap Unc 1/4-20 Bot Recoil Tap Unc 5/16-18 Taper Recoil Tap Unc 5/16-18 Inter Recoil Tap Unc 5/16-18 Bot Recoil Tap Unc 3/8-16 Taper Recoil Tap Unc 3/8-16 Inter Recoil Tap Unc 3/8-16 Bot Recoil Tap Unc 7/16-14 Taper Recoil Tap Unc 7/16-14 Inter Recoil Tap Unc 7/16-14 Bot Recoil Tap Unc 1/2-13 Taper Recoil Tap Unc 1/2-13 Inter Recoil Tap Unc 1/2-13 Bot Recoil Tap Unc 9/16-12 Inter Recoil Tap Unc 9/16-12 Bott Recoil Tap Unc 5/8-11 Taper Recoil Tap Unc 5/8-11 Inter Recoil Tap Unc 5/8-11 Bot Recoil Tap Unc 11/16-11 Inter Recoil Tap Unc 3/4-10 Taper Recoil Tap Unc 3/4-10 Inter Recoil Tap Unc 3/4-10 Bot Recoil Tap Unc 7/8-9 Inter Recoil Tap Unc 7/8-9 Bot Recoil Tap Unc 1" -8 Taper Recoil Tap Unc 1"-8 Inter Recoil Tap Unc 1"- 8 Bot Recoil Tap 1-1/4Unc Intermed Recoil Tap Unc 1-1/2-6 Taper Recoil Tap Unc 1-1/2-6 Inter Recoil Tap Unc 4-40 Spir/Flute 6-32 Unc Spiral Point Tap Recoil Tap Unc 6-32 Spir/Flute 8-32 Unc Spiral Point Tap Recoil Tap Unc 8-32 Spir/Flute Recoiltap Unc 10-24 Spir/Flute

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

183

DESCRIPTION

RE43049 RE43059 RE43069 RE43079 RE43089 RE43108 RE43109 RE43129

Recoil Tap Unc 1/4-20 Sp/Flute Recoil Tap Unc 5/16-18 Sp/Flut Recoil Tap Unc 3/8-16 Sp/Flute Recoil Tap Unc 7/16-14 Spiral/Flute Recoil Tap Unc 1/2-13 Spiral/Flute Recoil Tap Unc 5/8-11 Spiral/Point Recoil Tap Unc 5/8X11 Spiral/Flute Recoil Tap Unc 3/4-10 Spiral/Flute

TAPS UNF

RE44044 RE44044 RE44045 RE44045 RE44046 RE44046 RE44049 RE44049 RE44054 RE44054 RE44055 RE44055 RE44056 RE44056 RE44059 RE44059 RE44064 RE44064 RE44065 RE44065 RE44066 RE44066 RE44074 RE44074 RE44075 RE44075 RE44076 RE44076 RE44084 RE44084 RE44085 RE44085 RE44086 RE44089 RE44089 RE44094 RE44094 RE44095

Recoil Tap Unf 1/4-28 Taper Recoil Tap Unf 1/4-28 Taper Recoil Tap Unf 1/4-28 Inter Recoil Tap Unf 1/4-28 Inter Recoil Tap Unf 1/4-28 Bottom Recoil Tap Unf 1/4-28 Bottom Recoil Tap 1/4-28 Spiral Flute Recoil Tap 1/4-28 Spiral Flute Recoil Tap Unf 5/16-24 Taper Recoil Tap Unf 5/16-24 Taper Recoil Tap Unf 5/16-24 Inter Recoil Tap Unf 5/16-24 Inter Recoil Tap Unf 5/16-24 Bottom Recoil Tap Unf 5/16-24 Bottom 5/16Unf Spiral Flute Tap 5/16Unf Spiral Flute Tap Recoil Tap Unf 3/8-24 Taper Recoil Tap Unf 3/8-24 Taper Recoil Tap Unf 3/8-24 Inter Recoil Tap Unf 3/8-24 Inter Recoil Tap Unf 3/8-24 Bottom Recoil Tap Unf 3/8-24 Bottom Recoil Tap Unf 7/16-20 Taper Recoil Tap Unf 7/16-20 Taper Recoil Tap Unf 7/16-20 Inter Recoil Tap Unf 7/16-20 Inter Recoil Tap Unf 7/16-20 Bottom Recoil Tap Unf 7/16-20 Bottom Recoil Tap Unf 1/2-20 Taper Recoil Tap Unf 1/2-20 Taper Recoil Tap Unf 1/2-20 Inter Recoil Tap Unf 1/2-20 Inter Recoil Tap Unf 1/2-20 Bottom Recoil Tap 1/2 X 20 Sp/Flute Recoil Tap 1/2 X 20 Sp/Flute Recoil Tap Unf 9/16-18 Taper Recoil Tap Unf 9/16-18 Taper Recoil Tap Unf 9/16-18 Inter

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

Item No.

RECOIL

TAPS

184

TAPS

RECOIL

TAPS

Item No.

DESCRIPTION

RE44095 RE44104 RE44104 RE44105 RE44105 RE44106 RE44106 RE44108 RE44108 RE44109 RE44109 RE44125 RE44125 RE44126 RE44126 RE44129 RE44129 RE44144 RE44144 RE44145 RE44145 RE44146 RE44146 RE44165 RE44165 RE44565 RE44565 RE44585 RE44585 RE44589 RE44589 RE44604 RE44604 RE44605 RE44605 RE44606 RE44606 RE44608 RE44608 RE44609 RE44609

Recoil Tap Unf 9/16-18 Inter Recoil Tap Unf 5/8-18 Taper Recoil Tap Unf 5/8-18 Taper Recoil Tap Unf 5/8-18 Inter Recoil Tap Unf 5/8-18 Inter Recoil Tap Unf 5/8-18 Bottom Recoil Tap Unf 5/8-18 Bottom Recoil Tap Unf 5/8X18 Sp/Point Recoil Tap Unf 5/8X18 Sp/Point Recoil Tap Unf 5/8-18 Sp/Flute Recoil Tap Unf 5/8-18 Sp/Flute Recoil Tap Unf 3/4-16 Inter Recoil Tap Unf 3/4-16 Inter Recoil Tap Unf 3/4-16 Bottom Recoil Tap Unf 3/4-16 Bottom Recoil Tap Unf 3/4-16 Sp/Flute Recoil Tap Unf 3/4-16 Sp/Flute Recoil Tap Unf 7/8-14 Taper Recoil Tap Unf 7/8-14 Taper Recoil Tap Unf 7/8-14 Inter Recoil Tap Unf 7/8-14 Inter Recoil Tap Unf 7/8-14 Bottom Recoil Tap Unf 7/8-14 Bottom Recoil Tap Unf 1" - 12 Inter Recoil Tap Unf 1" - 12 Inter Recoil Tap Unf 6-40 Inter Recoil Tap Unf 6-40 Inter Recoil Tap Unf #8-36 Inter Recoil Tap Unf #8-36 Inter Recoil Tap Unf #8-36 Spiral Recoil Tap Unf #8-36 Spiral Recoil Tap Unf #10-32 Taper Recoil Tap Unf #10-32 Taper Recoil Tap Unf #10-32 Inter Recoil Tap Unf #10-32 Inter Recoil Tap Unf #10-32 Bott Recoil Tap Unf #10-32 Bott Recoil Tap Unf 10-32 Sp/Point Recoil Tap Unf 10-32 Sp/Point Recoil Tap Unf 10-32 Sp/Flute Recoil Tap Unf 10-32 Sp/Flute

TAPS BSW

RE42025 RE42035 RE42044 RE42045 RE42046

Recoil Tap Bsw 1/8-40 Inter Recoil Tap Bsw 3/16-24 Inter Recoil Tap Bsw 1/4-20 Taper Recoil Tap Bsw 1/4-20 Inter Recoil Tap Bsw 1/4-20 Bott

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

185

DESCRIPTION

RE42055 RE42056 RE42064 RE42065 RE42066 RE42074 RE42075 RE42084 RE42085 RE42086 RE42095 RE42105 RE42106 RE42124 RE42124 RE42125 RE42125 RE42126 RE42126 RE42145 RE42145 RE42146 RE42146 RE42165 RE42165 RE42166 RE42166

Recoil Tap Bsw 5/16-18 Inter Recoil Tap Bsw 5/16-18 Bottom Recoil Tap Bsw 3/8-16 Taper Recoil Tap Bsw 3/8-16 Inter Recoil Tap Bsw 3/8-16 Bott Recoil Tap Bsw 7/16-14 Taper Recoil Tap Bsw 7/16-14 Inter Recoil Tap Bsw 1/2-12 Taper Recoil Tap Bsw 1/2-12 Inter Recoil Tap Bsw 1/2-12 Bott Recoil Tap Bsw 9/16-12 Inter Recoil Tap Bsw 5/8-11 Inter Recoil Tap Bsw 5/8-11 Bott Recoil Tap Bsw 3/4-10 Taper Recoil Tap Bsw 3/4-10 Taper Recoil Tap Bsw 3/4-10 Inter Recoil Tap Bsw 3/4-10 Inter Recoil Tap Bsw 3/4-10 Bottom Recoil Tap Bsw 3/4-10 Bottom Recoil Tap Bsw 7/8-9 Inter Recoil Tap Bsw 7/8-9 Inter Recoil Tap Bsw 7/8-9 Bottom Recoil Tap Bsw 7/8-9 Bottom Recoil Tap Bsw 1-8 Int Recoil Tap Bsw 1-8 Int Recoil Tap Bsw 1-8 Bottom Recoil Tap Bsw 1-8 Bottom

TAPS BSF

RE40035 RE40045 RE40055 RE40056 RE40064 RE40065 RE40066 RE40076 RE40085 RE40095 RE40105 RE40124 RE40144 RE40146

Recoil Tap Bsf 3/16-32 Inter Recoil Tap Bsf 1/4-26 Inter Recoil Tap Bsf 5/16-22 Inter Recoil Tap Bsf 5/16-22 Bottom Recoil Tap Bsf 3/8-20 Taper Recoil Tap Bsf 3/8-20 Inter Recoil Tap Bsf 3/8-20 Bottom Recoil Tap Bsf 7/16-18 Bottom Recoil Tap Bsf 1/2-16 Inter Recoil 9/16X16 Int Tap Recoil Tap Bsf 5/8-14 Inter Recoil 3/4X12 Taper Tap Recoil Tap Bsf 7/8-11 Taper Recoil Tap Bsf 7/8-11 Bottom

TAPS BA

RE40524 RE40525 RE40526

Recoil Tap 2Ba Taper Recoil Tap Ba-2 Inter Recoil Tap 2Ba Bttg

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

Item No.

RECOIL

TAPS

186

RECOIL

TAPS, STUDSAVERS, RE-THREADS, REGRIPS & GAUGES

Item No.

DESCRIPTION

TAPS BSP

RE41025 RE41045 RE41064 RE41065 RE41085 RE41105

Recoil Tap Bsp 1/8-28 Inter Recoil Tap Bsp 1/4-19 Inter Recoil Tap Bsp 3/8-19 Taper Recoil Tap Bsp 3/8-19 Inter Recoil Tap Bsp1/2-14 Inter Recoil Tap 5/8-14 Bsp Inter

TAPS NPT

RE46025

Recoil Tap Npt 1/8 - 27 Inter

STUDSAVER - Adjustable Male Thread Repairer

RE90620 RE90622 RE90621 RE92238 RE92240 RE92239 RE93200 RE93201

Recoil Studsaver1 M6-M20 Spare Blades (60Deg) For 90620 Spare Blades (55Deg) For 90620 Recoil Studsaver2 M22-M38 Spare Blades (60Deg) For 92238 Spare Blades (55Deg) For 92238 Recoil Studsaver3 M32-M128 Spare Blades (55Deg) For 93200

RE-THRED - Adjustable Re-Threding Tap

RE94021 RE94022 RE94023 RE94024 RE94025

Recoil Rethred 21 8-11Mm Recoil Rethred 22 12-16Mm Recoil Rethred 23 16-20Mm Recoil Rethred 24 22-32Mm Recoil Rethred 25 32-54Mm

PITCH/TPI GAUGES

RE65000 RE69000

Recoil Metric Thread Gauge Recoil Thread Pitch Gauge Set

REGRIP

Recoil Re-Grip 15ml Bottle For Removal Of Screw With Worn Heads Recoil Inserting TOOLS available on request please phone customer services on 0800553 236 REGRIP

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TECHNICAL SECTION

KEYSERT installation & removal installation

Drill out old threads with a standard drill. Note: Drill is oversize — see charts for proper dimensions. Chamfer the hole with a standard countersink (82°-100°).

Tap new threads with a standard tap. See charts for proper size and depth.

Screw in the insert until slightly below surface.

Drive keys down with several hammer taps on the proper installation tool.

REMOVAL

Drill out material between keys and internal thread with standard drill to specified depth (refer to charts for proper dimensions).

Deflect keys inward and break off.

Remove insert using an E-Z OUT or similar type tool.

Same size replacement insert may be installed in the original hole.

187

TECHNICAL SECTION

188

HOW TO INSTALL RECOIL INSERTS

1. Drill

2. Tap

Drill to clear out the damaged thread (if necessary).

Thread insert tap supplied. Tap thread should match up with bolt.

3. Install

4. Remove Tang

Wind insert in with light downward pressure until 1/4 to 1/2 turn below the surface, driving tang towards the bottom of the hole.

Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For sparkplug and large fine thread inserts, use long nose pliers and pull tang out.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

189

Locking Pliers & Vice Tools

GR150P GR150PUP

150mm - Aluminium with vee grooves 150mm – Polyurethane with vee groove

SELF LOCKING TOOLS

GR4 (10CR) GR5 (10R) GR6 (11R) GR7 (11SP) GR90 GR10 GR13 GR312 GR132 GR14 GR72 GR901

Universal Self lock Pliers with curved jaws Capacity: 0-30mm Length: 220mm Flat Jaw Self lock Pliers Capacity: 0-30mm Length: 220mm Welding C-Clamp Capacity: 0-80mm Length: 260mm Universal C-Clamp with Pressure Pads Capacity: 0-80mm Length: 280mm Welding Clamp without Pressure Pads Capacity: 0-60mm Length: 260mm Pipe Welding Clamp Capacity: 8-70mm Length: 270mm T-Slot Clamp Capacity: 0-75mm Length: 280mm T-nut and Screw for No.13 Long Reach T-Slot Clamp Capacity: 0-120mm Length: 410mm Universal C-Clamp – Compact Model Capacity: 0-80mm Length: 280mm Long Reach C-Clamp Capacity: 0-170mm Length: 410mm Replacement spring for all models

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

LOCKING PLIERS & VICE TOOLS

DescriPtion

PROTECTIVE VICE JAWS

SCANGRIP

Item No.

performance of its products. To compliment of 17,000 an standard constant product improvement. Diagera range manufacture part numbers Suttonoftools also offers & manufacturing of extensive range premium highdesign end tungsten carbide, special cutting toolstools alongfor withthe resurfacing & re-coating. masonry cutting Construction Industry.

SUTTON

Sutton is one ofhave the worlds largest independent, family owned DiagerTools products been manufactured in France cutting tool55companies. The company has an aggressive investment for over years. Diager distinguishes itself from its policy that ensures it iscommitment constantly improving the specifications & competitors by its to innovative design and

SUTTON contents

Jobber Drills - Bright, Blue and TiNite...... 192 - 197

Stub & Panel Drills.................................................198

Morse Taper Shank Drills & Sleeves.........199 - 201

Drill Guide & Sets........................................ 202 - 203

Specialist Drills........................................... 204 - 205

Masonry Drills.............................................206 - 208

Countersink & Deburring Tools, Screw Extractors & Sets............................208 - 209

Holesaws, Sets & Accessories..................209 - 211

Quickfit Arbors & Holecutters..............................212

Endmills & Sets............................................ 214 - 218

Reamers, Pin Punches & Sets....................219 - 220

SUTTON

Screwdriver Bits............................................ 221 - 222

Tap Wrenches & Die Holders.................................234

Jigsaw Blades................................................223 - 224

Button Dies & Die Nuts................................235 - 239

Taps & Sets.....................................................225 - 234

Engineer & fasteners Black Books......................................240

Tap & Die Sets (Including SKC Sets).................... 231

Sutton Technical Section............................................241 - 245

Carded Taps.............................................................. 232

192

BLUE BRIGHT

JOBBER DRILLS

TINITE

surface finish

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty

SUTTON

JOBBER DRILLS

Inch

10 mm

gauge

Item No.

0.30 0.40

80 79

S360015080 S360015079

0.40 0.45 0.50

78 77 76 75 74 73 72 71 70 69 68

S360015078 S360015077 S360015076 S360015075 S360015074 S360015073 S360015072 S360015071 S360015070 S360015069 S360015068

67 66 65 64 63 62 61

S360015067 S360015066 S360015065 S360015064 S360015063 S360015062 S360015061

60 59

S360015060 S360015059

S360015058

Item No.

S340019440

S343010440

S243010440

1/64

0.55 0.60 0.65 0.70 0.75 1/32 0.80 0.85 0.90 0.95 1.00

1.05

S340019441

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S243010441

193

BLUE BRIGHT

JOBBER DRILLS

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty Inch

10 mm

gauge

Item No.

S360015057

1.10 1.15 56 1.20 1.25 1.30 55

S360015055

S360015054

S360015053

1.55 1.60

1.80 1.85 1.90

S360015052

S360015051

S360015050

S360015049

S360015048

1.95

S340019003 S340019447 S340019449 S340019451

S243010447 S243010449 S243010451

S340019453 S340019455 S340019457 S340019459

S243010453 S243010455 S243010457 S243010459

S243010465 S243010467

S340019471 S340019473 S340019475

S243010471 S243010475

S343010005

S243010477 S243010005

S343010479

S243010479

S340019483 S340019485

S243010483

S340019487 S340019489

S243010487

S340019491

S243010491

S360015044

2.20 2.25 43

S243010004 S243010463

S360015046 S360015045

2.10 2.15 44

S343010004

S340019465 S340019467 S340019469

S340019479 S340019481 46 45

S343010459

S360015047

2.00 2.05

2.30

S243010443 S243010445

S340019477 S340019005

5/64 47

1 Item No.

S340019443 S340019445

S340019461 S340019004 S340019463

1/16

1.65 1.70 1.75

1 Item No.

S360015056

3/64

1.35 1.40 1.45 1.50

10 Item No.

S360015043

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

JOBBER DRILLS

surface finish

SUTTON

TINITE

194

BLUE BRIGHT

JOBBER DRILLS

TINITE

surface finish

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty

SUTTON

JOBBER DRILLS

Inch

10 mm

gauge

Item No.

S360015042

2.35

S340019006 S340019495

2.40 41

S360015041

S340013241

S340013242

S340013243

S340013244

S340013245

S340013246

S340013247

S340013248

S340013249

S340013250

2.45

S340019499

2.55 2.60

7/64 2.80

S243010006 S243010495 S243010497

S343010499

S243010499

S340019501

S243010501

S340019503

S243010503

S340019505 S340019507 S340019509 S340019007

S243010505

S343010007

S243010007 S243010511

S340019513

3.10

S340019515 S340019517 S340019519 S340019523 S340019008 S340019527

1/8 3.20 30

S343010519

S343010008

S243010515 S243010517 S243010519 S243010523 S243010008 S243010527

S340013251

3.30 3.40

S340019531 S340019535 29

S340013252

S340013253

3.50 9/64 3.60 27

S340013254

26 25

S340013255 S340013256

3.70 3.80

S343010006

S340019511

2.85

1 Item No.

S243010493

S340019497

2.50

2.90 2.95 3.00

1 Item No.

S340019493

3/32

2.65 2.70 2.75

10 Item No.

S243010531 S243010535

S340019539

S343010539

S243010539

S340019009 S340019543

S343010009

S243010009 S243010543

S340019547 S340019551

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S243010551

195

BLUE BRIGHT

JOBBER DRILLS

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty Inch

10 mm

gauge

Item No.

S340013257

S340013258

S340013259

21 20

S340013260 S340013261

3.90

4.00

4.10 4.20 19 18

S340013262 S340013263

S340013264

16 15

S340013265 S340013266

14 13

S340013267 S340013268

4.60 4.70

S340019010

S343010010

S243010010

S340019559

S343010559

S243010559

4.80 12 11

S340013269 S340013270

10 9

S340013271 S340013272

S340013273

S340013274

S340013275

S340013276

S340013277

S340013278

4.90

S340019571 S340019011

S343010011

S243010571 S243010011

S340019575 S340019579

S343010579

S243010575 S243010579

S340019587 S340019012 S340019591

S243010583

S343010012

S340019595

5.00

S340019599

5.10

S340019013 5.20 5.30 5.40

S243010012 S243010591

S243010595

S343010599

S340019603

13/64

5.50

S243010563 S243010567

S340019583

3/16

7/32

1 Item No.

S340019563 S340019567

11/64 4.40 4.50

1 Item No.

S340019555

5/32

4.30

10 Item No.

S243010599 S243010603

S343010013

S243010013

S340019607

S243010607

S340019609

S243010609

S340019613

S243010613

S340019617 S340019014

S343010617 S343010014

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S243010617 S243010014

JOBBER DRILLS

surface finish

SUTTON

TINITE

196

BLUE BRIGHT

JOBBER DRILLS

TINITE

surface finish

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty

JOBBER DRILLS

Inch

10 mm

gauge

Item No.

S340013279

S340013280

SUTTON

5.60 5.70 5.80 5.90 15/64 6.00 6.10 6.20 6.30 1/4 6.40 6.50 6.60 6.70 17/64 6.80 6.90 7.00 7.10 9/32 7.20 7.30 7.40 7.50 19/64 7.60 7.70 7.80 7.90 5/16 8.00 8.10 8.20 8.30 21/64 8.40 8.50 8.60 8.70

10 Item No.

1 Item No.

S340019621

S243010621

S340019625

S243010625

S340019629 S340019633 S340019015 S340019637 S340019641 S340019645 S340019649 S340019016 S340019653 S340019657 S340019671 S340019675 S340019017 S340019679 S340019683 S340019687 S340019691 S340019018 S340019695 S340019699 S340019703 S340019707 S340019019 S340019711 S340019715 S340019719 S340019723 S340019020 S340019727 S340019731 S340019735 S340019739 S340019021 S340019743 S340019747 S340019751

S243010629 S243010633 S243010015 S243010637 S243010641 S243010645 S243010649 S243010016 S243010653 S243010657 S243010671

S343010015 S343010637

S343010016 S343010657

S343010017

S343010687 S343010018

S343010707 S343010019

S343010020 S343010727

S343010021 S343010747

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S243010017 S243010679 S243010683 S243010687 S243010691 S243010018 S243010695 S243010699 S243010703 S243010707 S243010019 S243010711 S243010719 S243010723 S243010020 S243010727 S243010731 S243010735 S243010739 S243010021 S243010743 S243010747 S243010751 S243010755

197

BLUE BRIGHT

JOBBER DRILLS

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty Inch

10 mm

11/32 8.80 8.90 9.00 9.10 23/64 9.20 9.30 9.40 9.50 3/8 9.60 9.70 9.80 9.90 25/64 10.00 10.10 10.20 10.30 13/32 10.40 10.50 10.60 10.70 27/64 10.80 10.90 11.00 11.10 7/16 11.20 11.30 11.40 11.50 29/64 11.60 11.70 11.80 11.90

gauge

item no.

S340019022 S340019759 S340019763 S340019767 S340019771 S340019023 S340019775 S340019779 S340019783 S340019787 S340019024 S340019791 S340019795 S340019799 S340019803 S340019025 S340019807 S340019811 S340019815 S340019819 S340019026 S340019823 S340019827 S340019831 S340019835 S340019027 S340019839 S340019843 S340019847 S340019851 S340019028 S340019855 S340019859 S340019863 S340019867 S340019029 S340019871 S340019875 S340019879 S340019883

S343010022

S243010022 S243010759 S243010763 S243010767

S343010767 S343010023

S343010787 S343010024

S343010025 S343010807

S343010026 S343010827

S343010027

S343010847 S343010028

S343010867 S343010029

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S243010023 S243010775 S243010779 S243010783 S243010787 S243010024 S243010795 S243010799 S243010803 S243010025 S243010807 S243010811 S243010815 S243010819 S243010026 S243010823 S243010827 S243010831 S243010835 S243010027 S243010839 S243010843 S243010847 S243010851 S243010028 S243010855 S243010859 S243010863 S243010867 S243010029 S243010871 S243010875 S243010883

JOBBER DRILLS

surface finish

SUTTON

TINITE

198

BLUE BRIGHT

JOBBER DRILLS

TINITE

surface finish

bright

blue

bright

Tinite

packaging

bulk

prepack

material

hss

order qty

SUTTON

JOBBER DRILLS

Inch

10 mm

gauge

Item No.

15/32 12.00 12.10 12.20 12.30 31/64 12.40 12.50 12.60 12.70 1/2 12.80 12.90 13.00

Item No.

S340019030 S340019887 S340019891 S340019895 S340019899 S340019031 S340019903 S340019907 S340019911 S340019915 S340019032 S340019919 S340019923 S340019927

S343010030 S343010887

S243010030 S243010887 S243010891 S243010895 S243010899 S243010031 S243010903 S243010907 S243010911 S243010915 S243010032 S243010919 S243010923 S243010927

S343010031 S343010907

S343010032

S343010927

STUB & PANEL surface finish

bright

packaging

bulk

twinpack

material

hss

order qty DIA

10 Item No.

2 Item No.

STUB - 180ยบ Point

1/8 No.30

S345027008 S345027251

SHORTIE - Single Ended

1/8 No.30 No.20 No.11

S345030008 S345030251 S345030270

S345091060 S345091061 S345091062 S345091063

S345033008 S345033251 S345033261 S345033270

S345091064 S345091065 S345091066 S345091067

TUPOINT - Double Ended

1/8 No.30 No.20 No.11

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

199

MORSE TAPER SHANK DRILLS

Item No.

Morse Taper Shank No.1

10.00 10.50 11.00 7/16 11.50 29/64 15/32 12.00 31/64 12.50 1/2 13.00 33/64 17/32 13.50 35/64 14.00

surface finish blue Inch

S331008100 S331008105 S331008110 S331004028 S331008115 S331004029 S331004030 S331008120 S331004031 S331008125 S331004032 S331008130 S331004033 S331004034 S331008135 S331004035 S331008140

3/4 49/64 19.50 25/32 20.00 51/64 20.50 13/16 21.00 53/64 27/32 21.50 55/64 22.00 7/8 22.50 57/64 23.00

Morse Taper Shank No.2

14.50 37/64 15.00 19/32 39/64 15.50 5/8 16.00 41/64 16.50 21/32 17.00 43/64 11/16 17.50 45/64 18.00 23/32 18.50 47/64 19.00

Item No.

Morse Taper Shank No.2

29/32 9/16

prepack hss

S331004048 S331004049 S331008195 S331004050 S331008200 S331004051 S331008205 S331004052 S331008210 S331004053 S331004054 S331008215 S331004055 S331008220 S331004056 S331008225 S331004057 S331008230 S331004058

Morse Taper Shank No.3

S331004036 S331008145 S331004037 S331008150 S331004038 S331004039 S331008155 S331004040 S331008160 S331004041 S331008165 S331004042 S331008170 S331004043 S331004044 S331008175 S331004045 S331008180 S331004046 S331008185 S331004047 S331008190

59/64 23.50 15/16 24.00 61/64 24.50 31/32 25.00 63/64 1" 25.50 1 -1/64 26.00 1- 1/32 26.50 1- 3/64 1- 1/16 27.00 1- 5/64 27.50 1- 3/32

S331004059 S331008235 S331004060 S331008240 S331004061 S331008245 S331004062 S331008250 S331004063 S331004064 S331008255 S331004065 S331008260 S331004066 S331008265 S331004067 S331004068 S331008270 S331004069 S331008275 S331004070

*0-32mm currently made in New Zealand with range extensions underway.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

MORE TAPER SHANK DRILLS

Inch

prepack hss

SUTTON

surface finish blue

200

MORSE TAPER SHANK DRILLS

surface finish blue

SUTTON

MORSE TAPER SHANK DRILLS

Inch

prepack hss

Item No.

Morse Taper Shank No.3

surface finish blue Inch

prepack hss Item No.

Morse Taper Shank No.4

28.00 1- 7/64 28.50 1- 1/8 1- 9/64 29.00 1- 5/32 29.50 1- 11/64 30.00 1- 3/16 30.50 1- 13/64 1-7/32 31.00 1- 15/64 31.50 1- 1/4

S331008280 S331004071 S331008285 S331004072 S331004073 S331008290 S331004074 S331008295 S331004075 S331008300 S331004076 S331008305 S331004077 S331004078 S331008310 S331004079 S331008315 S331004080

1- 7/16 1 -29/64 37.00 1- 15/32 37.50 1- 31/64 38.00 1 -1/2 1-33/64 1- 17/32 39.00 1-35/64 39.50 1 9/16 40.00 1-37/64 1 -19/32 40.50 1-39/64

Morse Taper Shank No.4

32.00 1- 17/64 32.50 1- 9/32 1- 19/64 33.00 1- 5/16 33.50 1- 21/64 34.00 1- 11/32 34.50 1- 23/64 1- 3/8 35.00 1- 25/64 35.50 1- 13/32 36.00 1- 27/64 36.50

S331008320 S331004081 S331008325 S331004082 S331004083 S331008330 S331004084 S331008335 S331004085 S331008340 S331004086 S331008345 S331004087 S331004088 S331008350 S331004089 S331008355 S331004090 S331008360 S331004091 S331008365

41.00 1- 5/8 41.50 1-41/64 42.00 1-21/32 42.50 1-11/16 43.00 1-45/64 43.50 1- 23/32 44.00 1- 3/4 44.50 45.00 1- 25/32 45.50 46.00 1- 13/16

*0-32mm currently made in New Zealand with range extensions underway.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S331004092 S331004093 S331008370 S331004094 S331008375 S331004095 S331008380 S331004096 S331004097 S331004098 S331008390 S331004099 S331008395 S331004100 S331008400 S331004101 S331004102 S331008405 S331004103 S331008410 S331004104 S331008415 S331004105 S331008420 S331004106 S331008425 S331004108 S331008430 S331004109 S331008435 S331004110 S331008440 S331004112 S331008445 S331008450 S331004114 S331008455 S331008460 S331004116

201

Inch

prepack hss Item No.

Inch

Morse Taper Shank No.4

46.50 1- 27/32 47.00 47.50 1- 7/8 48.00 1- 29/32 48.50 49.00 1- 15/16 49.50 50.00 1- 31/32 2"

surface finish blue

prepack hss

Item No.

Morse Taper DRILL SLEEVES

S331008465 S331004118 S331008470 S331008475 S331004120 S331008480 S331004122 S331008485 S331008490 S331004124 S331008495 S331008500 S331004126 S331004128

1 1 2 2 3 3 4

2 3 3 4 4 5 5

S359410001 S359410002 S359410003 S359410005 S359410006 S359410009 S359410010

cutting fluid Item No.

description

S359910250

Sutton Cutting Fluid

LIST Price

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

15.95

SUTTON

surface finish blue

MORSE TAPER SHANK DRILLS & SLEEVES

Morse Taper Shank Drills & Sleeves

202

SUTTON

DRILL SET GUIDE

S344091101

S344091102

S344091103

SM1

SM2

SM3

S344091151

S344091152

S344091153

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

203

DRILL SETS

SURFACE FINISH Set No.

Range & Rises

BRIGHT

BLUE

COBALT

No.Drills

Case

Item No.

1/16-1/4x64ths 1/16-3/8x64ths 1/16-1/2x64ths 1/16-1/2x32nds with 3/8 RS on 13/32-1/2 1/16-1/4x64ths

13 21 29

ABS ABS ABS ABS

S344091101 S344091102 S344091103 S344091109

S344092101 S344092102 S344092103 S344092109

S344291101 S344291102 S344291103

ABS

S344091004

1.00-6.50mmx.5mm 1.00-10.00mmx.5mm 1.00-13.00mmx.5mm 1.00-6.50mmx.5mm 1.00-5.90mmx0.1mm 6.00-10.00mmx0.1mm

12 19 25 12 50 41

ABS ABS ABS ABS Metal Metal

S344091151 S344091152 S344091153 S344091054

#1 - #60 WG #61 - #80 WG

60 20

Metal Plastic Case

S360095030 S360095031

S4 METRIC

SM1 SM2 SM3 SM4 SM30 SM41

S344092151 S344092152 S344092153 S344092059 S344092064

WIRE GAUGE SETS

S30 S31 DRILL STANDS

S7 SM7

1/16-1/2x64ths 1.0-3.0x0.25

Metal Stand Metal Stand

S359091007 S359091057

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DRILL SETS

S1 S2 S3 S3BR

SUTTON

IMPERIAL

204

SPECIALIST DRILLS

SUTTON

SPECIALIST DRILLS

CENTRE DRILLS & SET

Dia (INCH)

Length

Dia (MM)

Length

Qty

ITEM No.

3/64 5/64 7/64 1/8 3/16 7/32 1/4

10 10 10 10 5 3 1

S362010401 S362010402 S362010403 S362010404 S362010405 S362010406 S362010407 S362090005

CENTRE DRILLS - TYPE A

BS. 1 BS. 2 BS. 3 BS. 4 BS. 5 BS. 6 BS. 7 SET - SCD-1

1/8 3/16 1/4 5/16 7/16 1/2 5/8 Range #1, 2, 3, 4, 5

1 1/4 1 7/8 2 2 1/8 2 3/4 3 3 1/4

3/64 5/64 7/64 1/8 3/16 7/32 1/4 Set in wooden block

SPOTTING DRILLS & SET

DIA (mm)

Qty

ITEM No.

SPOTTING DRILLS - TiNite coated (for accurate hole location and simultaneous chamfering)

6.0 8.0 10.0 12.0 16.0 20.0 SET - SDT5 - Comprises 6.0, 8.0, 10.0, 12.0, 16.0

63 80 90 100 114 130

25 29 32 32 35 37

1 1 1 1 1 1 1

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S249010006 S249010008 S249010010 S249010012 S249010016 S249010020 S249091005

205

SPECIALIST DRILLS

Qty

ITEM No.

4.0 5.0 6.0 8.0 9.5 10.0 12.0

80 93 101 115 126 132 150

52 54 61 76 83 85 106

1 1 1 1 1 1 1

Qty

62 61 58 56 59 65 61

1 1 1 1 1 1 1

S341013559 S341013599 S341013637 S341013727 S341013787 S341013807 S341013887

GLASS & TILE DRILLS

DIA (mm)

ITEM No.

METRIC TUNGSTEN CARBIDE TIPPED GLASS AND TILE DRILLS

3.0 4.0 5.0 6.0 8.0 10.0 12.0

66 65 64 64 70 80 80

S370362006 S370362008 S370362010 S370362012 S370362016 S370362020 S370362024

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

DIA (mm)

WOOD BITS - HSS (“W” type point for self centering & to prevent splintering on exit)

SPECIALIST DRILLS

WOOD DRILLS

206

MASONRY DRILLS

SURFACE FINISH

bright (prepack)

packaging

tungsten carbide tipped

SUTTON

MASONRY DRILLS

type

(SF) standard fixing

Dia. /Inch

OAL (MM)

1/8 5/32 3/16

3.00 4.00 5.00

60 75 85 150 85 150 100 150 100 150 400 100 150 120 150 400 120 120 150 400 150 120 150 120 150 400 150 130 150 400 150 160 400 160 400 160 400

5.50 6.00 1/4

6.50

9/32

7.00

5/16

8.00

11/32 3/8

7/16

1/2

9/16 5/8

9.00 10.00

11.00 12.00 13.00

14.00 16.00

23/32 3/4

18.00 20.00

7/8

22.00

25.00

Shank Size

Item No.

(SB) single brick Item No.

(DB) double brick Item No.

S369761021 S369761031 S369761051 S369762053 S369761072 S369762073 S369761082 S369762083 S369761092 S369762093 S369763098 S369761112 S369762113 S369761132 S369762133 S369763138 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12

S369761152 S369761182 S369762183 S369763178 S369762213 S369761192 S369762233 S369761196 S369762253 S369763258 S369762283 S369762303 S369763308 S369762353 S369763358 S369762383 S369763388 S369762423

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S369763428

207

MASONRY DRILLS

runner sds PLUS & multi purpose DRILLS

S370115010 S370115110 S370115012 S370115112 S370115212 S370115013 S370115113 S370115213 S370115016 S370115116 S370115216 S370115120 S370115220 S370115124 S370115224 S370115126 S370115128 S370115228 S370115232 * Merchandiser Avaliable

DIA (mm)

DIA (Inch)

OAL

Shank

3/16

x 110 x 160 x 110 x 160 x 210 x 110 x 160 x 210 x 110 x 160 x 210 x 160 x 210 x 160 x 210 x 160 x 160 x 210 x 210

SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus

6.5

1/4

5/16

3/8

12 13 14

1/2 9/16

5/8

Multi Purpose Drill Bits ItemNo.

S370256006 S370256008 S370256010 S370256011 S370256012 S370256013 S370258013 S370256014 S370258014 S370256016 S370258016 S370256018 S370256020 S370258020 S370257024 S370258024 S370257026 S370258026 S370257028 S370257030 S370257032 * Merchandiser Avaliable

DIA (mm)

OAL

App

3 4 5 5.5 6 6.5

x 60 x 75 x 85 x 85 x 100 x 100 x 300 x 100 x 300 x 120 x 300 x 120 x 120 x 300 x 150 x 300 x 150 x 300 x 150 x 150 x 150

(SF) (SF) (SF) (SF) (SF) (SF) (DB) (SF) (DB) (SF) (DB) (SF) (SF) (DB) (SB) (DB) (SB) (DB) (SB) (SB) (SB)

7 8 9 10 12 13 14 15 16

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

Item No.

masonry drillS

runner SDS plus drill bits

208

MASONRY PENETRATOR, countersink & deburring tools

SUTTON

masonry PENETRATOR

penetrator percussion hammer drills Item No.

Dia

OA Length

Flute Length

Hex Across Flat

S370562010 S370562011 S370562012 S370562013 S370562016 S370562020 S370562024 S370562026 S370562028 S370562032 S370562040

5 5.5 6 6.5 8 10 12 13 14 16 20

150 150 150 150 150 150 150 150 150 150 160

92 92 92 92 92 92 92 91 91 79 89

4.1 4.3 4.8 4.7 6.7 8.1 8.9 10.0 10.9 11.0 11.0

COUNTERSINK & DEBURRING TOOLS Code

Range

Shank Size

Weldon Equiv.

Item No.

1/4" 1/4" 1/4" 1/2" 1/2" 1/2"

DB-8 DB-14 DB-18 DB-26 DB-36 DB-48

S334010901 S334010902 S334010903 S334010904 S334010905 S334010906

CROSS HOLE (Deburring)

CH901 CH902 CH903 CH904 CH905 CH906

3-6 mm 4-10 mm 5-13 mm 8-20 mm 14-28 mm 13-37 mm

SINGLE FLUTE 90ยบ included angle - Countersink

SF901 SF902 SF903 SF904

1-10 mm 2-14 mm 2-20 mm 3-28 mm

1/4" 1/4" 1/2" 1/2"

S334020901 S334020902 S334020903 S334020904

1/4" 1/4" 1/2" 1/2" 1/2"

S334030901 S334030902 S334030903 S334030904 S334030905

THREE FLUTE 90ยบ included angle - Countersink

TF901 TF902 TF903 TF904 TF905

4-10 mm 4-14 mm 5-20 mm 6-28 mm 6-37 mm

Cross Hole SetS (Deburring)

CH3 SC1

4-20mm, 1 each: CH902, CH903, CH904 3-28mm, 1 each: CH901, CH902, CH903, CH904, CH905

S334091003 S334091001

Three Flute Set (Countersinking)

TF3 STF1

4-20mm, 1 each: TF901, TF902, TF903 4-28mm, 1 each: TF901, TF902, TF903, TF904

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S334093003 S334093001

209

#1 #2 #3 #4 #5

5/64 7/64 5/32 7/32 19/64

Range mm

Range inch

ORDER Qty

Item No.

M2.5 - M4 M4 - M5 M5 - M7 M7 - M10 M10 - M20

3/32 - 5/32 5/32 - 7/32 7/32 - 9/32 9/32 - 3/8 3/8 - 5/8

1 1 1 1 1

S363761001 S363761002 S363761003 S363761004 S363761005

M22 - M25 M25 - M39 M36 - M45 M45 - M55

5/8 - 7/8 7/8 - 1-1/8 1-1/8 - 1-3/8 1-3/8 - 2-1/8

1 1 1 1

S335731006 S335731007 S335731008 S335731009

SUTTON

Size Drill Size screw extrators - SINGLE - Skinpack

screw extraCtors & holesaws

screw extrators - Single (Plastic case)

#6 #7 #8 #9

27/64 17/32 13/16 1-1/16

SETS CONTENTS Screw extrator Skinpack

S15 S15A S20

Item No.

#1 - #5 screw extractors #1 - #6 screw extractors #1 - #5 screw extractors / combination drill set includes: 1 each Stub drill: 5/64, 7/64, 5/32, 7/32, 19/64"

S363799015 S337799016 S337799020

holesaws Type Inch

bi-metal carton “B” mm

skinpack “SB”

Description

Item No.

Description

Item No.

B-056 B-062 B-068 B-075 B-078 B-081 B-087 B-093 B-100 B-106 B-112 B-118

S338011014 S338011016 S338011017 S338011019 S338011020 S338011021 S338011022 S338011024 S338011025 S338011027 S338011029 S338011030

SB-056 SB-062

S338061014 S338061016

SB-075 SB-078

S338061019 S338061020

SB-087

S338061022

SB-100 SB-106 SB-112 SB-118

S338061025 S338061027 S338061029 S338061030

S338011032 S338011033 S338011035 S338011037 S338011038 S338011040 S338011041 S338011043

SB-125 SB-131 SB-137 SB-143 SB-150 SB-156 SB-162

S338061032 S338061033 S338061035 S338061037 S338061038 S338061040 S338061041

Holesaw Arbors BA-0 or BA-1

9/16 5/8 11/16 3/4 13/16 7/8 15/16 1" 1-1/16 1-1/8 1-316

14 16 17 19 20 21 22 24 26 27 29 30

Holesaw Arbors BA-2, BA-3A, BA-4, BA-8 or TA-3A

1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16

32 33 35 37 38 40 41 43

B-125 B-131 B-137 B-143 B-150 B-156 B-162 B-168

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

210

HOLESAWS

SUTTON

Type

bi-metal carton “B”

skinpack “SB”

Inch

Description

Item No.

Description

Item No.

1-3/4 1-13/16 1-7/8 2" 2-1/16 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8 2-1/2 2-9/16 2-5/8 2-3/4 2-7/8 3" 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4" 4-1/8 4-1/4 4-3/8 4-1/2 4-3/4

44 46 48 51 52 54 56 57 59 60 63 65 67 70 73 76 79 83 86 89 92 95 98 102 105 108 111 114 121 123 127 140 152

B-175 B-181 B-187 B-200 B-206 B-212 B-218 B-225 B-231 B-237 B-250 B-256 B-262 B-275 B-287 B-300 B-312 B-325 B-337 B-350 B-362 B-375 B-387 B-400 B-412 B-425 B-437 B-450 B-475 B-484 B-500 B-550 B-600

S338011044 S338011046 S338011048 S338011051 S338011052 S338011054 S338011056 S338011057 S338011059 S338011060 S338011063 S338011065 S338011067 S338011070 S338011073 S338011076 S338011079 S338011083 S338011086 S338011089 S338011092 S338011095 S338011098 S338011102 S338011105 S338011108 S338011111 S338011114 S338011121 S338011123 S338011127 S338011140 S338011152

SB-175

S338061044

SB-187 SB-200

S338061048 S338061051

SB-212

S338061054

SB-225

S338061057

SB-237 SB-250

S338061060 S338061063

SB-275

S338061070

SB-300

S338061076

SB-337 SB-350

S338061086 S338061089

SB-400

S338061102

SB-450

S338061114

5" 5-1/2 6"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

211

Holesaws (bi-metal)

Arbors

Item No.

No.5

5/8 1-1/8 1-3/4 5-1/8 3-3/8 16mm 40mm 16mm 40mm 3/4 1-3/8 2-1/4

No.7 (Plumbers Set) No.8 No.9 (Electricians Set) No.14

3/4 1-1/14 2" 2" 4-3/8 20mm

BA3A

S338019005

7/8 1-3/8

1" 1-1/2

BA0

BA1

2-1/4

2-7/8

BA3A

25mm

32mm

BA0

BA Adaptor

S338019008

20mm 51mm 7/8 1-1/2 2-1/2

25mm

32mm

BA1

BA3A

S338019009

1" 1-3/4 3"

1-1/4 2"

BA0

BA3A

S338019014

2-1/8 1-1/2

25mm Spade Bit 25mm Spade Bit

S338019007

Lock Installation Sets

LK1 LK2

1-1/14 1-1/14

BA2 BA3A

S326095001 S326095002

HOLESAWs - arborS & accessories ARBORS

Code

Size

Chuck

BA0

dia. 1/4”

6mm (1/4”)

1/2-20 UNF

BA1

hex 11/32

10mm (3/8)

1/2-20 UNF

BA2

hex 11/32

10mm (3/8)

5/8-18 UNF

BA3A

Quick Change

hex 7/16

13mm (1/2)

TA3A

Quick Change

hex 11/32

10mm (3/8)

BA4

Quick Change

hex 5/8

16mm (5/8)

BA8

No3 MT

5/8-18 UNF

Holesaw

5/8-18 UNF (1-1/4 to 6”) 5/8-18 UNF (1-1/4 to 6”) 5/8-18 UNF (1-1/4 to 6”) Heavy Duty Drive with Spigot (3” to 6”) 76mm-152mm

Code

Item No.

S338012012

SBA2

S338062012

32mm-152mm

S338012013

SBA3A

S338062013

32mm-152mm

S338012021

STA3A

S338062021

32mm-152mm

S338012016

SBD024

S338064024

14mm-30mm (9/16 to 1-3/16) 14mm-30mm (9/16 to 1-3/16) 32mm-54mm (1-1/4 to 2-1/8)

Item No.

S338012006 S338012011

S338012018

ARBOR SET

SAS1

BA1, Adaptor BA

S338069003

1/2”UNF to 5/8”UNF

S338013021

BA1,BA2,BA4, TA3A,BA3A BA0

S338014024 S338014025 S338014026

ADAPTOR

BA PILOT DRILLS

BD024 BD025 BS025

6.35mm (1/4”) x 3-1/4” long 6.35mm (1/4”) x4-1/8” long Ejector Spring

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

set No. holesaw Sets

HOLESAWS sets, ARBORS & ACCESSORIES

Holesaws sets, ARBORS & ACCESSORIES

212

quickfit arbors & HOLECUTTERS

SUTTON

quickfit arbors & HOLESAWS

DESCRIPTION

CHUCK SIZE

THREAD

HOLESAW SIZE

Item No.

10mm

5/8-18 UNF

32 - 152mm

S338512510

10mm

1/2-20 UNF 5/8-18 UNF

14-30mm

32-152mm

S338512512

10mm

1/2-20 UNF 5/8-18 UNF

14-30mm

32-152mm

S338512513

1/2-20 UNF

14-30mm

quickfix arbors & ADAPTOR

QF1 Quickfit Arbor Pilot Drill - BD-024 QF2 Quickfit Tandem Arbor Pilot Drill WHC250 QF3 Quickfit Set: QF1 Quickfit Arbor, QF4 Quickfit Adaptor, Pilot Drill - BD - 024, Pilot Drill - WHC250 QF4 Quickfit Adaptor

holecutters - tct single tooth wood DIA (mm)

Item No.

25mm 32mm 38mm 44mm 51mm 54mm 57mm 63mm whc 1 arbor whc 2 arbor whc 3 arbor whc250 pilot drill door lock kit

S337061025 S337061032 S337061038 S337061044 S337061051 S337061054 S337061057 S337061063 S337070036 S337070038 S337070040 S337090024 S337070010

holecutters - tct DIA (mm)

Item No.

holecutters - tct (tungsten carbide tipped)

16mm 19mm 20mm 21mm 22mm 25mm 28mm 30mm 32mm 35mm 38mm 40mm 42mm 44mm 50mm 55mm 60mm 65mm 70mm 75mm 6X60mm Pilot Drill

S353811016 S353811019 S353811020 S353811021 S353811022 S353811025 S353811028 S353811030 S353811032 S353811035 S353811038 S353811040 S353811042 S353811044 S353811050 S353811055 S353811060 S353811065 S353811070 S353811075 S353815006

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S338513200

online material based product selection…

Online product advice has never been easier with Sutton Tools’ revolutionary Expert Tools Selector. The Sutton Tools Expert Tools Selector will recommend the correct tool for your specific application with everything from suitable coolant choices through to cutting calculations. Our Expert Tool Selector provides easy step-by-step detailed information that includes: • Fast and easy to use tool selection system • High speed navigation • Quickly search by product description or catalogue number • Material classifications • Suitable tool and machining data, based on the latest research • Animated demonstrations of machining processes • Stock availability

Visit www.suttontools.com.au to find the right tool for your job.

www.suttontools.com.au/ETS/ExpertToolSelector

214

end mills - 2 flute Threaded Shank - Imperial

of Cutter

Size

Length

of Cut

No.Flutes

Item No.

1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 1" 1" 1" 1" 1" 1"

2" 2" 2" 2-1/16 2-1/8 2-3/16 2-1/8 2-5/16 2-5/16 2-3/8 2-3/8 2-9/16 2-5/8 2-11/16 2-13/16 2-7/8 3" 3-16/16 4-1/32 4" 4-1/32 3-3/4 4"

3/32 5/32 3/16 1/4 7/32 9/32 3/8 7/16 1/2 9/16 9/16 11/16 3/4 7/8 7/8 15/16 1" 1" 1-1/32 1-1/16 1-3/32 1-3/16 1-1/2

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

S323300406 S323300407 S323300408 S323300409 S323300410 S323300411 S323300412 S323300418 S323300419 S323300420 S323300421 S323300428 S323300430 S323300431 S323300437 S323300438 S323300439 S323300462 S323300463 S323300464 S323300465 S323300466 S323300468

1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 1" 1" 1" 1"

2" 2" 2-1/2 2-3/4 2-3/4 3" 3" 3-1/8 3-1/8 3-1/4 3-1/2 3-3/4 4" 4-1/4 4-1/2 4-3/4 5-3/4 6-1/4 6-1/4 6-1/4

3/16 1/4 7/16 1/2 1/2 5/8 5/8 3/4 3/4 7/8 7/8 1" 1-1/8 1-1/4 1-3/8 1-5/8 1-5/8 1-3/4 1-7/8 2"

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

S323300706 S323300707 S323300708 S323300709 S323300710 S323300711 S323300712 S323300718 S323300719 S323300721 S323300728 S323300730 S323300731 S323300737 S323300738 S323300739 S323300762 S323300764 S323300766 S323300768

SUTTON

end mills - 2 flute

SHORT

1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 15/16 1" 1-1/16 1-1/8 1-1/4 LONG

1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1" 1-1/8 1-1/4

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

215

end mills - 2 flute Threaded Shank - METRIC

of Cutter

Size

Length

of Cut

No.Flutes

Item No.

6 6 6 6 6 10 10 10 10 12 12 12 12 16 16 16 16 16 16 25 25 25 25 25 25 25 32

49.0 51.0 52.5 52.5 56.5 59.5 59.5 60.5 60.5 66.5 66.5 68.5 68.5 72.0 72.0 74.0 74.0 77.0 77.0 98.5 100.0 101.5 103.0 101.0 95.0 93.5 117.5

3.0 7.5 9.5 9.5 11.0 11.0 12.5 14.0 14.5 17.5 19.0 19.0 22.0 22.0 24.0 24.0 25.5 25.5 25.5 25.5 25.5 25.5 25.5 27.0 30.0 30.0 35.0

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

S323310404 S323310406 S323310408 S323310410 S323310412 S323310414 S323310416 S323310418 S323310420 S323310422 S323310424 S323310426 S323310428 S323310430 S323310432 S323310434 S323310436 S323310438 S323310440 S323310441 S323310442 S323310443 S323310444 S323310445 S323310447 S323310448 S323310481

6 6 6 6 6 10 10 10 10 12 12 12 12 16 16 16 16 16 16

51.0 60.5 66.5 70.0 76.0 76.0 79.5 82.5 82.5 89.0 95.0 95.0 101.5 108.0 108.0 114.5 114.5 120.5 120.5

4.0 11.0 12.5 12.5 16.0 16.0 19.0 22.0 22.0 22.0 25.5 25.5 28.5 31.5 31.5 35.0 35.0 38.0 38.0

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

S323310704 S323310706 S323310708 S323310710 S323310712 S323310714 S323310716 S323310718 S323310720 S323310722 S323310724 S323310726 S323310728 S323310730 S323310732 S323310734 S323310736 S323310738 S323310740

LONG

2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 28.0 30.0 32.0

end mills - 2 flute

SHORT

216

ENDMILLS - 4 or 6 flute threaded shank IMPERIAL

of Cutter

Size

Length

of Cut

No.Flutes

Item No.

1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 1" 1" 1" 1"

2-1/8 2-1/4 2-1/4 2-3/8 2-3/8 2-3/8 2-1/2 2-5/8 2-5/8 2.-5/8 2.-3/4 2-7/8 3" 3-1/8 3-1/14 3-7/8 4" 4-1/8 4-1/4

3/8 1/2 1/2 5/8 5/8 5/8 3/4 7/8 7/8 7/8 1" 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-11/16 1-13/16 1-15/16

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6

S323302408 S323302409 S323302410 S323302411 S323302412 S323302418 S323302419 S323302420 S323302421 S323302428 S323302430 S323302431 S323302437 S323302438 S323302439 S323302462 S323302464 S323302466 S323302468

1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 1" 1" 1" 1"

2-1/2 2-3/4 2-3/4 3" 3" 3-1/8 3-1/8 3-1/14 3-1/2 3-3/4 4" 4-1/4 4-1/2 4-3/4 5-3/4 6-1/2 6-1/2 6-1/2

5/8 7/8 1" 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-3/4 2" 2-1/4 2-1/2 2-3/4 3" 3-1/2 4" 4" 4"

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6

S323302708 S323302709 S323302710 S323302711 S323302712 S323302718 S323302719 S323302721 S323302728 S323302730 S323302731 S323302737 S323302738 S323302739 S323302762 S323302764 S323302766 S323302768

SUTTON

ENDMILLS - 4 or 6 flute

SHORT

1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1" 1-1/8 1-1/4 LONG

1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/8 1" 1-1/8 1-1/4

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

217

ENDMILLS - 4 or 6 flute threaded shank metric

of Cutter

Size

Length

of Cut

No.Flutes

Item No.

6 6 6 6 10 10 10 12 12 16 16 16 25 25 25 25 32

54.0 57.0 60.5 60.5 60.5 63.5 66.5 70.0 73.0 77.0 80.0 83.5 98.5 101.5 104.5 104.5 112.5

9.5 12.5 16.0 16.0 15.0 18.0 21.0 24.0 28.5 26.5 35.0 38.0 41.5 44.5 46.0 46.0 51.0

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

S323312406 S323312408 S323312410 S323312412 S323312414 S323312416 S323312420 S323312424 S323312428 S323312432 S323312436 S323312440 S323312442 S323312445 S323312447 S323312448 S323312481

6 6 6 6 10 10 12 12 16 16 16

64.0 70.0 76.0 76.0 79.5 82.5 95.0 101.5 108.5 115.0 121.5

19.0 26.0 32.0 32.0 34.0 37.0 49.5 57.0 58.0 70.0 76.0

4 4 4 4 4 4 4 4 4 4 4

S323312706 S323312708 S323312710 S323312712 S323312716 S323312720 S323312724 S323312728 S323312732 S323312736 S323312740

LONG

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 25.0 28.0 30.0 32.0

ENDMILLS - 4 or 6 flute

SHORT

218

endmills - 3 flute & sets METRIC & imperial

of Cutter

Size

Length

of Cut

No.Flutes

Item No.

1/4 1/4 1/4 3/8 3/8 1/2 5/8 5/8

2" 2-1/8 2-1/8 2-5/16 2-3/8 2-5/8 2-13/16 3"

3/16 9/32 3/8 1/2 9/16 3/4 7/8 1"

3 3 3 3 3 3 3 3

S323301408 S323301410 S323301412 S323301419 S323301421 S323301430 S323301437 S323301439

1/4 1/4 1/4 3/8 3/8 1/2 5/8 5/8

2-1/2 2-3/4 3" 3-1/8 3-1/4 3-3/4 4-1/4 4-3/4

3/4 1" 1-1/4 1-3/8 1-1/2 2" 2-1/2 3"

3 3 3 3 3 3 3 3

S323301708 S323301710 S323301712 S323301719 S323301721 S323301730 S323301737 S323301739

51.0 52.5 52.5 56.5 59.5 60.5 66.5 68.5 72.0 77.0

7.5 9.5 9.5 11.0 12.5 14.5 19.0 22.0 22.0 25.5

3 3 3 3 3 3 3 3 3 3

S323311406 S323311408 S323311410 S323311412 S323311416 S323311420 S323311424 S323311428 S323311432 S323311440

SUTTON

ENDMILLS - 3 flute & sets

SHORT

1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 LONG

1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 SHORT

3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 20.0

6 6 6 6 10 10 12 12 16 16

Endmill Sets Set

Contents

Item No.

endmill DRILLS - THREADED SHANK

SD2 SD2M

1/8 4.0

ENDMILLS - THREADED SHANK EM2 1/8

EM2M

4.0

3/16 5.0

1/4 6.0

5/16 8.0

3/8 10.0

1/2 12.0

S323910006 S323910106

3/16 5.0

1/4 6.0

5/16 8.0

3/8 10.0

1/2 12.0

S323910010 S323910110

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

219

reAmers

METRIC hand & machine

hand

6.0 mm 6.5 mm 7.0 mm 7.5 mm 8.0 mm 8.5 mm 9.0 mm 9.5 mm 10.0 mm 10.5 mm 11.0 mm 11.5 mm 12.0 mm 12.5 mm 13.0 mm 13.5 mm 14.0 mm 14.5 mm 15.0 mm 16.0 mm 17.0 mm 18.0 mm 18.5 mm 19.0 mm 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm

parallel SQ dr

tapper

ITEM NO.

S324110112 S324110113 S324110114 S324110115 S324110116 S324110117 S324110118 S324110119 S324110120 S324110121 S324110122 S324110123 S324110124 S324110125 S324110126 S324110127 S324110128 S324110129 S324110130 S324110132 S324110134 S324110136 S324123037 S324110138 S324110140 S324110142 S324110144 S324110146 S324110148 S324110150

S324123012 S324123014 S324123015 S324123016 S324123018 S324123020 S324123021 S324123022 S324123024 S324123025 S324123026 S324123028 S324123029 S324123030 S324123032 S324123034 S324123036 S324123038 S324123040 S324123042 S324123044 S324123048 S324123050

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

reamers

shank

machine

SUTTON

description

220

PIN PUNCHES & sets

Point Dia.

Overall Length

Item No.

100 100 100 100 100 100 100

S354210020 S354210023 S354210024 S354210026 S354210028 S354210030 S354210031

150 155 160 165 170 175 175 175

S354314025 S354314030 S354314040 S354314050 S354314060 S354314065 S354314080 S354314100

100 100 100 100 100

S354320020 S354320025 S354320030 S354320040 S354320050

100 100 100 100 100

S354325020 S354325025 S354325030 S354325040 S354325050

2.0,2.5, 3.0,4.0,5.0,6.0,6.5mm 2.5, 3.0, 4.0, 5.0, 6.0, 6.5, 8.0, 10.0mm 2.0, 2.5, 3.0, 4.0, 5.0mm

S354910007 S354914008 S354920005

SUTTON

PIN PUNCHES & SETS

SHORT PIN PUNCHES

2.0 2.5 3.0 4.0 5.0 6.0 6.5 LONG PIN PUNCHES

2.5 3.0 4.0 5.0 6.0 6.5 8.0 10.0 CENTRE PUNCHES

2.0 2.5 3.0 4.0 5.0 NAIL PUNCHES

2.0 2.5 3.0 4.0 5.0 PIN PUNCH SETS

PP7S - Short Pin Punches PP8L - Long Pin Punches CP5R - Centre Punches

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

221

SCREWDRIVER BITS

Type

Size

Qty p/card

Item No.

M5 x 25mm M7 x 25mm M3 x 50mm M8 x 50mm

2 2 1 1

S359561105 S359561107 S359562112 S359562117

(PH1) (PH2) (PH3) (PH1) (PH2) (PH3) (PH2) (PH2)

#1 x 25mm #2 x 25mm #3 x 25mm #1 x 50mm #2 x 50mm #3 x 50mm #2 x 3-1/2" #2 x 45mm d/end #2 x 65mm d/end #2 x 152mm

2 2 2 1 1 1 1 1 1 1

S359561201 S359561202 S359561203 S359562201 S359562202 S359562203 S359562212 S359563202 S359563402 S359562612

(PZ1) (PZ2) (PZ1) (PZ2) (PZ3)

#1 x 25mm #2 x 25mm #1 x 50mm #2 x 50mm #3 x 50mm #2 x 60mm d/end

2 2 1 1 1 1

S359561301 S359561302 S359562311 S359562312 S359562313 S359563610

#1 x 25mm #2 x 25mm #3 x 25mm #1 x 50mm #2 x 50mm #3 x 50mm #2 x 90mm #2 x 152mm

2 2 2 1 1 1 1 1

S359581401 S359581402 S359581403 S359581501 S359581502 S359581503 S359581702 S359581802

SCREWDRIVER BITS

SLOTTED

SUTTON

PHILLIPS

POZIDRIV

SQUARE

MAGNETIC HOLDER

S359566616 NUTSETTER

1/4" x 43mm 5/16" x 43mm 3/8" x 48mm 1/4" x 66mm 5/16" x 66mm 3/8" x 66mm

Type

1 1 1 1 1 1

S359572104 S359572105 S359572106 S359573204 S359573205 S359573206

Size

No.

BATTEN HEAD INSERT BIT

M5 x 25mm

Qty 2

S359573349

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

phillips power

222 phillips insert

SCREWDRIVER BITS BULK

Type

Size

Item No.

PH1 PH2 PH2 PH3 PZ1 PZ2 PZ3 R1 R2 R2

#1 x 25mm #2 x 25mm #2 x 89mm #3 x 89mm #1 x 25mm #2 x 25mm #3 x 25mm #1 x 25mm #2 x 25mm #3 x 25mm

VAM27020 VAM27021 VAM27367 VAM27368 VAM27045 VAM27046 VAM27047 VAM29049 VAM29050 VAM29051

PH1 PH2 PH3 PZ1 PZ2 PZ3 PZ1 PZ2 PZ3 PZ1 PZ2 PZ3 5-6 6-7 8-10 R1 R2 R2 R2 R1 R2 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" C-Ring

#1 x 50mm #2 x 50mm #3 x 50mm #1 x 50mm #2 x 50mm #3 x 50mm #1 x 76mm #2 x 76mm #3 x 76mm #1 x 150mm #2 x 150mm #3 x 150mm 50mm 50mm 50mm #1 x 50mm #2 x 50mm #3 x 50mm #2 x 76mm #1 x 150mm #2 x 150mm 40mm 40mm 40mm 65mm 65mm 65mm 73mm

VAM27360 VAM27361 VAM27362 VAM27380 VAM27381 VAM27382 VAM28316 VAM28317 VAM28318 VAM27389 VAM27390 VAM27391 VAM27464 VAM27465 VAM27466 VAM29052 VAM29053 VAM29054 VAM29059 VAM39957 VAM39959 VAM31450 VAM31452 VAM36165 VAM37582 VAM37583 VAM37584 VAM27690

1/4” Insert Bits

SUTTON

SCREWDRIVER BITS

PHILLIPS

POZIDRIV

SQUARE

1/4” Power Bits

PHILLIPS

POZIDRIV

SLOTTED

SQUARE

NUTSETTERS

BIT HOLDER

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

POZI power

square power

223

JIGSAW BLADES TO SUIT BOSCH

5 pack

Code No.

Bosch No.

Application

Item No.

8001 8002 8003 8005 8006 8007 8009 8011 8012 8013 8015 8017 8018 8024

T101B T101D T111C T119B T144D T244D T118A T118B T118G T127D T119BO T318B T101BR -

Wood Finecut Wood Cleancut Wood Gen. Purpose Plywood Chipboard Wood Fastcut Wood Scroll Metal Fastcut-Steel Metal Fastcut-Steel Metal Thin Reinforced Plastic Wood Scroll Longreach Metal, Thick Chpbd Laminates (Downcut) Wood Longreach

30 60 60 30 60 60 3 6 3 30 30 80 30 75

2.5 4.0 2.5 2.5 4.0 4.0 1.2 2.5 0.8 2.5 2.5 2.5 2.5 4.0

S352428001 S352428002 S352428003

S352458001 S352458002 S352458003 S352458005 S352458006 S352458007 S352458009 S352458011 S352458012 S352458013

CARBIDE GRIT - 1 PACK

8040

T150

S352428006 S352428007 S352428009 S352428011 S352428012

JIGSAW BLADES

2 pack

SUTTON

depth of cut

S352428015 S352458018 S352428018

Qty

Ceramics, Fibreglass

Medium

S352418040

Jigsaw Blades - To Suit Black & Decker and Skil (Universal) depth of cut Code No.

Bosch No.

8601 8602 8603 8604 8605 8606 8608 8610 8618

2 pack

5 pack

Application

Item No.

Wood, fastcut Wood, gen.purp. Wood, plastics Wood, fastcut-steel - non ferrous Metal, thin sheet Wood, finecut Wood, plastics,fine/fast Wood, scrolls Laminates, Down stroke

60 30 60 6 10 2 30 60 30 30

4.0 2.5 2.5 2.5

S352428601 S352428602 S352428603 S352428604

S352458601 S352458602

0.8 2.5 4.0 2.5 2.5

S352428605 S352428606 S352428608 S352428610 S352428618

S352458605 S352458606

S352491001 S352491023

3 Pack 5 Pack

S352458604

S352458610 S352458618

SETS

SBD-1 SBD-3

Skinpacked Plastic Case

8601, 8605, 8606 8601, 8603, 8606, 8613, 8615

To Suit Ryobi

8604 8605

Wood, fastcut-steel Metal, thin sheet

6 2

2.5 0.8

S352428604 S352428605

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

224

JIGSAW BLADES TO SUIT MAKITA

SUTTON

JIGSAW BLADES

depth of cut

2 pack

5 pack

Code No.

MAKITA No.

Application

Item No.

8701 8702 8703 8704 8705 8706 8707 8718

1 3 24 8 9 6 -

Metal thin sheets Wood, fine cut Wood, plastics Metal,fastcut Wood, fast cut Wood,plastics,v.finecut Wood, scrolls Laminates, (Down cut)

3 15 30 4 50 30 30 30

1.2 1.2 2.5 2.5 4.0 2.5 2.5 2.5

S352428701 S352428702 S352428703 S352428704 S352428705 S352428706 S352428707 S352428718

S352458701 S352458702 S352458703 S352458704 S352458705

Carded

8701, 8703, 8704, 8705, 8706

S352458707 S352458718

SETS

SMK-3

S352491030

RECIPROCATING BLADES - UNIVERSAL SHANKS TO SUIT: BOSCH, BLACK & DECKER, METABO, MAKITA & SKIL Code No.

9004 9005 9006 9007 9008 9009 9102 9104 9106 9108

Bosch No.

Application

Item No.

Wood - very fastcut Plasterbd, Plastics Wood - fastcut Wood, Tree Pruning Wood, Plastics - fastcut All metals, Cement Sheet,Chipbd All metals All metals,Cement Sheet, Chipbd All metals All Metals,Cement-forward stroke

100 100 180 180 250 2-5 2-5 2-5 2-5 2-5

8.5 4.0 8.5 5.6 4.0 2.5 1.4 2.5 1.4 2.5

S352328905 S352328903 S352328923 S352328922 S352328904 S352328909 S352328908 S352328901 S352328913 S352328925

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Taper Inter Bot

225

TAPS

STRAIGHT FLUTE ISO

bright hss - ground thread lead Size

TPI

taper

inter

bot

sets

Item No.

S304044071 S304044125 S304044152 S304044206 S304044233 S304044260 S304044287 S304044341 S304044368 S304044395 S304044422 S304044449 S304044476 S304044503 S304044530 S304044584 S304044638 S304044665 S304044692 S304044719 S304044800 S304044854 S304044905 S304044974

S304044072 S304044126 S304044153 S304044207 S304044234 S304044261 S304044288 S304044342 S304044369 S304044396 S304044423 S304044450 S304044477 S304044504 S304044531 S304044585 S304044639 S304044666 S304044693 S304044720 S304044801 S304044855 S304044906 S304044975

S304044073 S304044127 S304044154 S304044208 S304044235 S304044262 S304044289 S304044343 S304044370 S304044397 S304044424 S304044451 S304044478 S304044505 S304044532 S304044586 S304044640 S304044667 S304044694 S304044721 S304044802 S304044856 S304044907 S304044976

S304048395 S304048449 S304048503 S304046506 S304048530 S304048584 S304048638 S304048665 S304048692 S304048719

S304048396 S304048450 S304048504 S304046507 S304048531 S304048585 S304048639 S304048666 S304048693 S304048720

S304048397 S304048451 S304048505 S304046508 S304048532 S304048586 S304048640 S304048667 S304048694 S304048721

S304052449 S304048503 S304052530 S304048638

S304052450 S304048504 S304052531 S304048639

S304052451 S304048505 S304052532 S304048640

S304910305 S304910311 S304910317 S304910320 S304910326 S304910335 S304910346

METRIC ISO FINE - 60ยบ Thread Form

M8 M10 M12 M12 M14 M16 M18 M20 M22 M24

1.00 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 2.00

SPARK PLUG - 60ยบ Metric ISO Thread Form

M10 M12 M14 M18

1.00 1.25 1.25 1.50

SD & T1 HSS METRIC TAP & DRILL SET

S330091001

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

0.40 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00

SUTTON

METRIC ISO COARSE 60ยบ

M2 M2.5 M3 M3.5 M4 M4.5 M5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36

Taper Inter Bot

226

TAPS

STRAIGHT FLUTE ISO

bright hss - ground thread lead Size

TPI

taper

inter

bot

sets

Item No.

S304054122 S304054149 S304054179 S304054233 S304054290 S304054344 S304054454 S304054506 S304054536 S304054563 S304054590 S304054620 S304054647 S304054674 S304054704 S304054731 S304054758

S304054123 S304054150 S304054180 S304054234 S304054291 S304054345 S304054455 S304054507 S304054537 S304054564 S304054591 S304054621 S304054648 S304054675 S304054705 S304054732 S304054759

S304054124 S304054151 S304054181 S304054235 S304054292 S304054346 S304054456 S304054508 S304054538 S304054565 S304054592 S304054622 S304054649 S304054676 S304054706 S304054733 S304054760

S304910218 S304910219 S304910220 S304910221 S304910222 S304910223 S304910224 S304910225 S304910226 S304910227

S304058122 S304058149 S304058176 S304058230 S304058287 S304058341 S304058449 S304058503 S304058533 S304058560 S304058590 S304058617 S304058644 S304058671 S304058701 S304058728 S304058758 S304058779 S304058812 S304058839 S304058893

S304058123 S304058150 S304058177 S304058231 S304058288 S304058342 S304058450 S304058504 S304058534 S304058561 S304058591 S304058618 S304058645 S304058672 S304058702 S304058729 S304058759 S304058780 S304058813 S304058840 S304058894

S304058124 S304058151 S304058178 S304058232 S304058289 S304058343 S304058451 S304058505 S304058535 S304058562 S304058592 S304058619 S304058646 S304058673 S304058703 S304058730 S304058760 S304058781 S304058814 S304058841 S304058895

TAPS

SUTTON

UNC - 60ยบ Thread Form

#4 #5 #6 #8 #10 #12 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

40 40 32 32 24 24 24UNS 20 18 16 14 13 12 11 10 9 8

UNF - 60ยบ Thread Form

#4 #5 #6 #8 #10 #12 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1" 1" 1-1/8 1-1/4 1-1/2

48 44 40 36 32 28 32UNS 28 24 24 20 20 18 18 16 14 12 14UNS 12 12 12

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S304910245 S304910250 S304910252 S304910253 S304910254 S304910255 S304910256 S304910257 S304910258 S304910259

Taper Inter Bot

227

TAPS

STRAIGHT FLUTE ISO

bright hss - ground thread lead Size

TPI

taper

inter

bot

sets

Item No.

S304062368 S304062395 S304062422 S304062449 S304062476 S304062503 S304062530 S304062557 S304062584 S304062611 S304062638 S304062665 S304062692 S304062719 S304062746

S304062369 S304062396 S304062423 S304062450 S304062477 S304062504 S304062531 S304062558 S304062585 S304062612 S304062639 S304062666 S304062693 S304062720 S304062747

S304062370 S304062397 S304062424 S304062451 S304062478 S304062505 S304062532 S304062559 S304062586 S304062613 S304062640 S304062667 S304062694 S304062721 S304062748

S304066449 S304066503 S304066530 S304066557 S304066584 S304066611 S304066638 S304066665 S304066692 S304066719 S304066746

S304066450 S304066504 S304066531 S304066558 S304066585 S304066612 S304066639 S304066666 S304066693 S304066720 S304066747

S304066451 S304066505 S304066532 S304066559 S304066586 S304066613 S304066640 S304066667 S304066694 S304066721 S304066748

S304071020 S304071047 S304071074 S304071101 S304071128 S304071155 S304071182 S304071209 S304071236 S304071263 S304071290

S304071021 S304071048 S304071075 S304071102 S304071129 S304071156 S304071183 S304071210 S304071237 S304071264 S304071291

S304071022 S304071049 S304071076 S304071103 S304071130 S304071157 S304071184 S304071211 S304071238 S304071265 S304071292

S304910114 S304910115 S304910116 S304910117 S304910118 S304910119 S304910120 S304910121 S304910122

BSF - 550 Thread Form 55ยบ

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

32 26 22 20 18 16 16 14 12 11 10

BA - 47.50 Thread Form

0 1 2 3 4 5 6 7 8 9 10

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

48 40 32 24 24 20 18 16 14 12 12 11 10 9 8

SUTTON

BSW - 55ยบ Whitworth Thread Form

3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

Taper Inter Bot

228

TAPS

STRAIGHT FLUTE & PIPE STRAIGHT FLUTE

bright hss - ground thread lead Size

taper

inter

bot

sets

Item No.

S304066503 S304073533 S304073560 S304073587 S304073614

S304066504 S304073534 S304073561 S304073588 S304073615

S304066505 S304073535 S304073562 S304073589 S304073616

S304467399 S304467507 S304467561 S304467615 S304467669 S304467696 S304467723 S304467750

S304467400 S304467508 S304467562 S304467616 S304467670 S304467697 S304467724 S304467751

TPI

TAPS

SUTTON

BRASS - 55ยบ Thread Form

1/4 5/16 3/8 7/16 1/2

26 26 26 26 26

BSPF (G Series) Parrallel - 55ยบ Thread Form

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1"

28 19 19 14 14 14 14 11

S304467398 S304467506 S304467560 S304467614 S304467668 S304467695 S304467722 S304467749

BSPT (Rc Series) Taper Thread - 55ยบ Thread Form

1/8 1/4 3/8 1/2 3/4 1" 1-1/14 1-1/2 2"

28 19 19 14 14 11 11 11 11

S304472397 S304472505 S304472559 S304472613 S304472694 S304472748 S304472829 S304472883 S304472979

NPT (Taper) 15ยบ Chamfer

1/8 1/4 3/8 1/2 3/4 1" 1-1/14

27 18 18 14 14 11-1/2 11-1/2

S304458397 S304458505 S304458559 S304458613 S304458694 S304458748 S304458829

NPS (Dryseal Taper) 15ยบ Chamfer

1/8 1/4 1/2

27 18 14

S304462397 S304462505 S304462613

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

229

TAPS

GUN ISO - SPIRAL POINT

bright hss - ground thread Size

TPI

Item No.

0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.50 1.00* 1.25* 1.50* *HSS > 20mm

S304144129 S304144156 S304144210 S304144237 S304144291 S304144345 S304144399 S304144453 S304144507 S304144534 S304144588 S304144642 S304144669 S304144855 S304148396 S304148450 S304146507

40 32 32 24 20 18 16 14 13 11 10

S304154123 S304154180 S304154234 S304154291 S304154507 S304154537 S304154564 S304154591 S304154621 S304154675 S304154705

32 28 24 24 20 20 18 16

S304158288 S304158504 S304158534 S304158561 S304158591 S304158618 S304158672 S304158702

40 32 24 20 18 16 14 12 11 10

S304162396 S304162423 S304162450 S304162504 S304162531 S304162558 S304162585 S304162612 S304162666 S304162693

UNC - 60ยบ Thread Form

#4 #6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 UNF - 60ยบ Thread Form

#10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 BSW - 55ยบ Thread Form

1/8 3/32 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M30 M8 M10 M12

SUTTON

METRIC ISO COARSE - 60ยบ Thread Form

230

TAPS

SPIRAL FLUTE ISO

bright hss - ground thread Size

TPI

Item No.

0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 1.00* 1.25* 1.50*

S304244127 S304244154 S304244208 S304244235 S304244289 S304244343 S304244397 S304244451 S304244505 S304244532 S304244586 S304244640 S304244667 S304248397 S304248451 S304248508

32 32 24 20 18 16 14 13 11 10

S304254181 S304254235 S304254292 S304254508 S304254538 S304254565 S304254592 S304254622 S304254676 S304254706

32 28 24 24 20 20 18 16

S304258289 S304258505 S304258535 S304258562 S304258592 S304258619 S304258673 S304258703

40 32 24 20 18 16 14 12 11

S304262397 S304262424 S304262451 S304262505 S304262532 S304262559

TAPS

SUTTON

METRIC ISO COARSE - 60ยบ Thread Form

M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M8 M10 M12 *Fine UNC - 60ยบ Thread Form

#6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 UNF - 60ยบ Thread Form

#10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 BSW - 55ยบ Thread Form

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 5/8

S304262613 S304262667

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

231

TAP & DIE SETS

TUNGSTEN CHROME ALLOY

Size

Contents

Pieces

Item No.

S363953002

Inter Taps: 8 x 1.25 Button Dies: Holder: Wrench:

3 x 0.5 10 x 1.5 1" OD 1" Button Die Holder #0 Bar Wrench

4 x .07 12 1.75

5 x 0.8

6x1

Taps: M5 x .08 Drills: 4.3mm

M6 x 1 5.1mm

M8 x 1.25 6.9mm

M10 x 1.5 8.6mm

M12 x 1.75 10.20mm

S304930000

Taps: 3/16 Drills: 3.7mm

1/4 5.1mm

5/16 6.5mm

3/8 7.9mm

1/2 10.50mm

S304930001

METRIC GUN TAP SET

BSW GUN TAP SET

skc tap & die sets Size

Contents

Pieces

Item No.

110 110 110

S363960010 S363960015 S363960020

SKC TAP & DIE SETS

METRIC SAE / METRIC WSF (BS/UN) EACH SET CONTAINS: TAPER & BOTTOMING TAPS (70 PCS) DIES FOR EACH SIZE (35 PCS) DIES STOCKS - 1” & 1 1/2 O/D TAP WRENCHES - 1.6 - 6mm, - 5 - 20mm T-TYPE TAP WRENCH - 1.6 - 6mm

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

T&D-1 Metric

tap & die sets

TAP & DIE SET

232

TAPS

TUNGSTEN CHROME ALLOY STEEL (CARDED)

bright skinpack - tungsten chrome alloy steel LEAD

TAPER

INTER

BOT

SETS

0.50 0.70 0.80 1.00 1.25 1.50 1.75

S363161149 S363161230 S363161284 S363161338 S363161392 S363161446 S363161500

S363161150 S363161231 S363161285 S363161339 S363161393 S363161447 S363161501

S363161151 S363161232 S363161286 S363161340 S363161394 S363161448 S363161502

S363193106 S363193109 S363193111 S363193113 S363193115 S363193117 S363193119

28 24 24 20 20

S363170500 S363170527 S363170554 S363170581 S363170608

S363170501 S363170528 S363170555 S363170582 S363170609

S363170502 S363170529 S363170556 S363170583 S363170610

S363194019 S363194020 S363194021 S363194022 S363194023

TAPS

SUTTON

METRIC ISO COARSE

M3 M4 M5 M6 M8 M10 M12 UNF

1/4 5/16 3/8 7/16 1/2 BSW

1/8 40 S363172392 S363172393 S363172394 S363194215 5/32 32 S363172419 S363172420 S363172421 S363194216 3/16 24 S363172446 S363172447 S363172448 S363194217 1/4 20 S363172500 S363172501 S363172502 S363194219 5/16 18 S363172527 S363172528 S363172529 S363194220 3/8 16 S363172554 S363172555 S363172556 S363194221 7/16 14 S363172581 S363172582 S363172583 S363194222 1/2 12 S363172608 S363172609 S363172610 S363194223 Hand Taps Carbon Taps - Not suitable for precision, safety or critical threads. General purpose / DIY use only. Straight flutes are designed for tapping into materials where chips break-up readily and present no disposal problems, particularly in through-hole tapping. Straight flute taps are only suitable for hand operations, tapping up to 1-1/2 x D.

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

Taper Inter Bot

233

Taps

Tungsten Chrome Alloy Steel

LEAD

TPI

TAPER

INTER

BOT

1.5 1.5 1.5 1.5 1.5 1.5

S363134581 S363134635 S363134662 S363134689 S363134743 S363134878

S363134582 S363134636 S363134663 S363134690 S363134744 S363134879

S363134583 S363134637 S363134664 S363134691 S363134745 S363134880

28 19 19 14 14 14 14 11 11 11 11

S363150392 S363150500 S363150554 S363150608 S363150662 S363150689 S363150716 S363150743 S363150824 S363150878 S363150974

S363150393 S363150501 S363150555 S363150609 S363150663 S363150690 S363150717 S363150744 S363150825 S363150879 S363150975

S363150494 S363150502 S363150556 S363150610 S363150664 S363150691 S363150718 S363150745 S363150826 S363150880 S363150976

28 19 19 14 14 11 11 11 11

S363152393 S363152501 S363152555 S363152609 S363152690 S363152744 S363152825 S363152879 S363152975

27 18 18 14 14 11 1/2 11 1/2 11 1/2 11 1/2

S363154392 S363154500 S363154554 S363154608 S363154689 S363154743 S363154824 S363154878 S363154974

BSPF PARALLEL THREAD

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1" 1 1/4 1 1/2 2" BSPT TAPER THREAD

1/8 1/4 3/8 1/2 3/4 1" 1 1/4 1 1/2 2" NPT TAPER THREAD

1/8 1/4 3/8 1/2 3/4 1" 1 1/4 1 1/2 2"

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

TAPS

M16 M18 M20 M22 M25 M32

SUTTON

METRIC CONDUIT THREAD

234

TAP wrencheS & die holders

SUTTON

TAPS WRENCHES & DIE HOLDERS

description

precision ratchet

packaging

general purpose

boxed

Size

Range

TAP WRENCHES 1/4 "T" Type 1/2 "T" Type SRW-1 RATCHET 1/4 SRW-2 RATCHET 1/2 00 BAR TYPE 0 BAR TYPE #5 BAR TYPE #6 BAR TYPE #7 BAR TYPE #8 BAR TYPE

M3 - M6, M6 - M12 M3 - M6, M6 - M12 M1.5 - M6 M3 - M12 M5 - M16 M6 - M20 M8 - M28 M20 - M38

1/8" - 1/4" 1/4" - 1/2" 1/8" - 1/4" 1/4" - 1/2" 1/16" - 1/4" 1/8" - 1/2" 3/16" - 5/8" 1/4" - 3/4" 5/16" - 1-1/8" 3/4" - 1-1/2"

prepack

Item No.

S363561020 S363561022 S363531024 S363531026 S363561030 S363561031 S363531036 S363531037 S363531038 S363531039

Die Holders boxed Size Range

1" 1-1/2" 2"

Item No.

prepack Item No.

S363661010 S363631012 S363631014

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

235

BUTTON DIES

Tungsten Chrome Alloy - Carbon Steel

Packaging

carded

die dia. Size

1” Pitch

Item no.

0.40 0.45 0.50 0.70 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00

S363331087 S363331089 S363331090 S363331093 S363331095 S363331097 S363331098 S363331099 S363331100 S363331101

1.00 1.25 1.50 1.25 1.25 1.50 1.50 1.50 1.50 1.50 2.00

S363334099 S363334101

1-1/2” Item no.

2” Item no.

S363331103

SUTTON

M2 M2.5 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24

BUTTON DIES

METRIC ISO COARSE

S363331182 S363331183 S363331185 S363331186 S363331187 S363331188

S363331271 S363331272 S363331274 S363331276 S363331277 S363331278 S363331279

METRIC FINE

M8 M10 M12* M12 M14 M14 M16 M18 M20 M22 M24

S363334103

S363334185 S363333187 S363334187 S363335188 S363334188

S363333271 S363334271 S363335272 S363334272 S363334274 S363334276 S363334277 S363334278 S363334279

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

236

BUTTON DIES

Tungsten Chrome Alloy - Carbon Steel

Packaging

carded

die dia. Size

1” Pitch

Item no.

24 20 18 16 14 13 12 11 10 9 8

S363338095 S363338103 S363338104 S363338105 S363338106 S363338107

32 32UNS 28 24 24 20 20 18 18 16 14 12

S363340095 S363341101 S363340103 S363340104 S363340105 S363340106 S363340107

40 32 24 20 18 16 14 12 12 11 10 9 8

S363342099 S363342100 S363342101 S363342103 S363342104 S363342105 S363342106 S363342107

1-1/2” Item no.

2” Item no.

SUTTON

BUTTON DIES

UNC

#10 1/4 3/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

S363338187 S363338188 S363338189 S363338190 S363338191 S363338192 S363338193

S363338275 S363338276 S363338277 S363338278 S363338279 S363338280

UNF

#10 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

S363340187 S363340188 S363340189 S363340190 S363340191 S363340192 S363340193

S363340275 S363340276 S363340277 S363340278 S363340279 S363340280

BSW

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

S363342185 S363342187 S363342188 S363342189 S363342190 S363342191 S363342192 S363342193

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

S363342275 S363342276 S363342277 S363342278 S363342279 S363342280

237

BUTTON DIES

TUNGSTEN CHROME ALLOY - CARBON STEEL

Packaging

carded

die dia. Size

1” Pitch

Item no.

1-1/2” Item no.

2” Item no.

28 19 19 14 14 14 14 11

S363350267 S363350271 S363350273 S363350275 S363350277 S363350278 S363350279 S363350280

1/8 1/4 3/8 1/2 3/4

28 19 19 14 14

S363352267 S363352271 S363352273 S363352275 S363352278

1/8 1/4 3/8 1/2 3/4

27 18 18 14 14

S363354267 S363354271 S363354273 S363354275 S363354278

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

32 26 22 20 18 16 16 14 12 11 10

BSPT (Rc)

NPT

BSF

S363344101 S363344103 S363344104 S363344105 S363344106

S363344187 S363344188 S363344189 S363344190 S363344275 S363344276 S363344277 S363344278 S363344279 S363344280

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

SUTTON

1/8 1/4 3/8 1/2 5/8 3/4 7/8 1"

BUTTON DIES

BSPF (G)

238

DIE NUTS

TUNGSTEN CHROME ALLOY - CARBON STEEL

Size

Pitch

boxed

carded

Item no.

DIE NUTS

SUTTON

METRIC ISO COARSE

M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36

0.80 1.00 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00

S363431095 S363431097 S363431098 S363431099 S363431101 S363431103 S363431188 S363431190 S363431192 S363431193 S363431194 S363431195 S363431282 S363431284 S363431454 S363431457

METRIC FINE

M8 M10 M10 M12* M12 M14 M16 M18 M20

1.00 1.00 1.25 1.50 1.25 1.50 1.50 1.50 1.50

S363434099 S363435101 S363434101 S363433103 S363434103 S363434188 S363434190 S363434192 S363434193

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

239

DIE NUTS

TUNGSTEN CHROME ALLOY - CARBON STEEL

Boxed

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1" 1" 1-1/8 1-1/14 1-1/2

Carded

Boxed

S363440103 S363440104 S363440105 S363440106 S363440107 S363440192 S363440193 S363440194

bsw

Carded

S363438103 S363438104 S363438105 S363438106 S363438107 S363438192 S363438193 S363438194 S363438195 S363438196

S363440195 S363440196 S363440197 S363440282 S363440283 S363440453

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

boxed

S363442195 S363442196

BSPF carded

boxed

caRDED

S363450099 S363444101 S363444103 S363444104 S363444105 S363444106 S363444107 S363444192 S363444193 S363444194 S363444195 S363444196

Carded

S363442099 S363442100 S363442101 S363442103 S363442104 S363442105 S363442106 S363442107 S363442192 S363442193 S363442194

S363442282 S363442283 S363442453

BSF SIZE

Boxed

S363450103 S363450189 S363450191 S363450193 S363450194 S363450280

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

DIE NUTS

Size

unc

SUTTON

unf

the ultimate reference book is here...

BLACK BOOK The ultimate reference book: - Matt laminated grease proof pages - Wire bound to stay flat on workbench when reading - Ideal for engineers, trades people, apprentices, machine shops, tool rooms, technical colleges

Engineers Black Book • Tables • Standards • Illustrations • Grinding wheels • Conversion factors • Tapers • Lubricants-coolants • G Codes • Spur gear calculations • Tolerances • Hardening & tempering • Weights of metal • Geometrical construction • Formulae • Engineering drawing standards • Plastics • Bolts & nuts • Tungsten carbide • Keys & keyways • Tapping drill sizes • Speeds & feeds • Equivalent charts • Sharpening information Fastener Black Book • Screw thread fundamentals • Standards • Thread classes • Thread terminology • Grades • Heat treatment • Material selection • Materials & coatings • Failures & corrosion • Fastener strengths & markings • Platings • Tolerances • Hydrogen embrittlement • Screw thread profiles • Torque control • Galling • Elevated temperature effects • Dimensional Specifications DIN / ISO / ANSI item no.

description

S376011015 S376021001

Engineers Black Book 2nd Edition Fasteners Black Book

TECHNICAL SECTION

241

TAP INFORMATION Chamfer Type / Length Table below is in accordance with ISO8830 / DIN2197 TERMINOLOGY

FORM

NUMBER OF APPROX. THREADS ON LEAD CHAMFER ANGLE

TYPE OF FLUTE

MAIN AREA OF APPLICATION

TAPER

6 to 8

5°

Hand or straight flutes

Short through holes

INTERMEDIATE

3.5 to 5

8°

Hand or straight

Generally for Through holes

BOTTOMING

1.5 to 2

23°

Hand or straight flutes

Blind holes with very short thread runout

INTERMEDIATE

3.5 to 5

10°

Straight, with spiral point

Through holes in medium & long chipping materials

BOTTOMING

2 to 3

15°

Spiral fluted

Generally for blind holes

ILLUSTRATION

* Use of this type is not recommended

TECHNICAL SECTION

242

TAP INFORMATION Tap Types - Helix direction/ Helical pitch / Fluteless The helix angle depends primarily upon the hole form, eg. Through hole , blind hole, deep blind hole, etc., but the material, eg short chips, long chips, also has a strong influence on the direction of the helix. The following basic forms have derived during the development of taps:

DESCRIPTION

ILLUSTRATION

Straight Flutes (Hand) - Suitable for through or blind holes. The flutes only have room for a small amount of chips. The chips are not transported axially. Therefore, it is not advisable to cut deep through or blind holes (except in short chipping materials), with this type.

Straight Flutes with (Gun) – Suitable for through holes, the gun point curls the chip forward ahead of the tap & out of the hole. Therefore, chip clogging is avoided and coolant can flow without problems.

Spiral Flutes (LH Spiral) – Suitable for interrupted through holes, where cross-holes exist. The direction of the flutes, curls & transports the chips forward of the tap, similar to Gun taps (also, opposite to RH spiral flutes). However, in applications where another hole intersects with the tapped hole, the helical flutes maintain the pitching of the thread. 15º Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to tough short chipping materials, up to 1.5 x D in depth. This particular tap design has no advantages for soft, and long chipping materials, especially over 1.5 x d1 in depth. Due to the slow helix angle not transporting the chips well, clogging is possible.

< 1.5xD

> 1.5xD < 1.5xD

40º to 50º Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to long chipping materials, the high helix angle & the direction of the flutes, curls & transports the chips back out of the hole. This particular tap style is required to cut on reversal; therefore flute rake is required on the both front & back flute faces. Thredflo/Roll taps (fluteless) - Suitable for blind & through holes. This type of tap internally rolls a thread, therefore displacing the metal rather than cutting, like the above mentioned styles. Due to torque generated when producing roll threads, much higher machine power is required. Roll threads also produce much stronger threads than cut threads, as the grain structure of the thread remains uniform through the D thread form profile. Note! Tapping drill size is not the same as a cut thread tap.

> 1.5xD

The above basic tool types are available in different variations, which have been designed & developed in respect to the specific materials and working conditions. < 1.5xD

TAP HOLE TYPE

thread exits one-sided

The two basic types of tapping holes are blind holes and through holes. D

THROUGH HOLES D

Upto 1xD (eg. nut)

< 1.5xD > 1.5xD

thread exits one-sided

BLIND HOLES D D

Upto 1xD (eg. nut)

> 1.5xD

thread exits one-sided

For blind holes, there are generally two thread runout forms used at the bottom of the tap hole. One form has a recessed diameter at the bottom of the hole, and the other form has a standard D runout. Other types of holes are respective to construction designs, eg. a) The bore is smaller than the tap hole diameter (typical for pipes) D b) As step hole, where the following diameter (second step), is smaller than the tap hole diameter. D

D Upto 1xD (eg. nut)

TECHNICAL SECTION

243

tap terminology

LAND

CUTTING FACE

CORE

FLUTE

THREAD RELIEF TYPES

CONCENTRIC THREADS (No radial relief)

RADIAL RELIEF

Section A-A

CONCENTRIC LAND RADIAL RELIEF

CON-ECCENTRIC THREADS (Relieved to a land)

ECCENTRIC THREADS (Relieved to cutting edge)

CUTTING FACES LAND TANGENTIAL HOOK

HEEL

NEGATIVE RAKE ANGLE NEGATIVE RAKE

CHORDAL HOOK

POSITIVE RAKE ANGLE RADIAL RAKE

POSITIVE RAKE

HOOK

TECHNICAL SECTION

244

TAPPING INFORMATION Use

Flow

Use of a suitable lubricant or cutting compound is necessary on most tapping operations. The type of lubricant as well as the method of application is often of extreme importance and can be responsible for the success or failure of a tapping operation.

The flow of lubricant should be directed into the hole rather than at the tap and should have sufficient pressure to wash the chips away from the hole as much as possible. Also, if the flow is not continuous, it should start before the tap enters the hole and continue until the tap is completely reversed out of the hole. In this way, ample oil is provided at the start of the cut and loose chips will be suspended in the oil so that they do not interfere with the tap backing out of the hole. On machines where the work revolves and the tap is stationary, it is desirable to use several streams of lubricant on opposite sides of the tap, especially on horizontal tapping.

Recommendation Better results can sometimes be obtained by the use of one of the many modified or specialised lubricants recommended by cutting oil specialists. The general principle is to have more EP (Extreme Pressure) additives added with the degree of difficulty, usually hardness increase. Oils stick, and improve frictional properties essential in tapping tough applications.

Application Proper application of the lubricant is just as important as the type used. To be effective, ample quantities of lubricant must reach the chamfer or cutting portion of the tap during the entire tapping operation. In many cases, the lubricant must also aid in controlling or disposing of the chips.

Cleanliness Tapping lubricants must always be clean. If filter equipment is not used, the lubricant must be replaced periodically to eliminate fine chips, grit and foreign matter that accumulate in the tank. Also, it is very important that the piping and tank are thoroughly flushed and cleaned before filling with new lubricant. The dilution of lubricants often changes during use so that additions may be necessary to maintain the recommended proportion of active materials.

Tapping drill The tapping drill hole diameter should be drilled as large as possible, within the respective fitting just under the upper permissible dimension of the tolerance. If the tapping drill hole diameter is too small, then this will cause the thread root diameter (minor diameter) to cut the material. This should be avoided, because the small chips which derive from the root of thread, clog the normal chip flow and rip pieces of material out of the finished thread. Consequently, the tap is overloaded and often breaks because of the high torque. Another problem which occurs in certain materials due to thread root diameter cutting, is when a chip-bulge has been formed around the root radius. The minor diameter of the tap is clogged with

small chips, which leads to a clamping of the tool teeth are ripped out, which leads to tool breakage. It is therefore, necessary that the material which is to be tapped, be taken into account when determining the tap hole diameter. Typical materials which do not squeeze or clamp are iron, brass and bronze and materials which squeeze are steels, steel castings and malleable steels. The tap cuts more economically, when the tap drill hole diameter is within the upper range of the permissible tolerance. Warning: When drilling holes in materials which tend to work harden, care is needed to ensure the drills are sharp otherwise tap life is decreased.

THREAD TYPE

FORMULA

EXAMPLE

Metric (ISO)

Drill Size = Nom. Tap Dia. in mm - Pitch

M6 x 1 = 5.00mm drill

Whitworth Form Threads (inch calculation)

Unified Form Threads (inch calculation)

1.28 Drill Size = Nom. Tap Dia. - TPI x of thread depth

1/4 BSW 75% thread required: 1.28 75 Drill Size = .250 20 x 100 = .250 - .048 Therfore Drill Size = .202 Nearest Standard Dill = .2007 inch 1/4 BSW 75% thread required: 1.30 75 Drill Size = .250 20 x 100 = .250 - .049 Therfore Drill Size = .201 Nearest Standard Dill = 5.1mm = .2007 inch

TECHNICAL SECTION

245

ENDMILL TERMINOLOGY ENDMILL DEFINITIONS

OVERALL LENGTH OVERALL LENGTH

SHANK LENGTH SHANK LENGTH

FLUTE LENGTH FLUTE LENGTH CUTTING LENGTH

ENDTEETH RELIEF ENDTEETH ANGLE RELIEF ANGLE

CUTTING LENGTH

For shank styles refer page 245 SHANK DIAMETER SHANK DIAMETER

CUTTING DIAMETER CUTTING DIAMETER

RAKE RAKE

PERIPHERAL RELIEF PERIPHERAL ANGLE RELIEF ANGLE

FLUTE FLUTE CORE CORE

Center cutting endmill RAISED LAND RAISED WIDTH LAND WIDTH

Conventional milling versus climb milling

Conventional milling. milling. Point Point A A may may become become work work hardened hardened Conventional Material Material to to be be removed removed by by Cutting Depth the next next tooth tooth Cutting Depth the (feed (feed per per tooth) tooth)

A milling cutter can cut in two directions, sometimes known as climb or conventional. Conventional milling: The depth of the cut starts at zero thickness, and increases up to the maximum. The cut is so light at the beginning that the tool does not cut, but slides across the surface of the material, until sufficient pressure is built up and the tooth suddenly bites and begins to cut. This deforms the material (at point A on the diagram, left), work hardening it, and dulling the tool. The sliding and biting behaviour leaves a poor finish on the material. Climb milling: Each tooth engages the material at a definite point, and the width of the cut starts at the maximum and decreases to zero. The chips are disposed behind the cutter, leading to easier swarf removal. The tooth does not rub on the material, and so tool life may be longer. However, climb milling can apply larger loads to the machine, and so is not recommended for older milling machines, or machines which are not in good condition. This type of milling is used predominantly on mills with a backlash eliminator.

Material Material Feed Feed

A A

Cutter Cutter Rotation Rotation

Chip formation formation during during climb climb milling milling Chip

Chip Chip

Cutter Cutter Rotation Rotation

Cutting Cutting Depth Depth (feed (feed per per tooth) tooth)

Material Material Feed Feed

246

TRADEFLAME

soldering irons & accessories

soldering irons & accessories Item No. SOLDERING IRONS AND ACCESSORIES

DESCRIPTION

PC211012 PC211112 PC211123 PC211134 PC211145 PC211156

Mini Soldering Torch Kit 7 in 1 Dual Power 30W & 60W Soldering Iron 240V Dual Power 50W & 100W Soldering Iron 240V 30W Soldering Iron 12V DC 3AA Battery Soldering Iron Solder Resin Core 15g 1.0mm

HANDYMAN PACKS

Handyman Kit - with cylinder, burner, fantail, soldering bit & holder, connecting valve and metal box Handyman Kit Hose & Handpiece - with burner, fantail, soldering bit & holder, connecting valve, handpiece, hose, connecting valve and metal box

PCBJ2101 PCBJ2102 TORCHES & BURNERS

PCBJ2144 PCBJ2145 PCBJ2146 PCBJ8719 PCBJ8720 PCBJ8725

Torch With Pinpoint Burner Medium Flame Torch Full Flame Torch Medium Burner Pin Point Burner Full Flame Burner

HANDPIECE, CONTROL VALVE & HOSES

PCBK2119 PCBK8179 PCBK8716

Handpiece Without Control Valve Primus 2 Mtr Hose Primus Connect Valve Bent Stem

CYLINDER

PCPRI2000

Cylinder 0.34Kg

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

247

engineers files

ENGINEERS FILES - PRE PACKED 1

INCHES

6" 6" 8" 8" 10" 10" 10" 12" 12" 12"

FLAT

DESCRIPTION

Item No.

BASTARD SMOOTH BASTARD SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH

4907000 4907002 4907006 4907010 4907022 4907030 4907024 4907049 4907057 4907052

HALF ROUND

ROUND

SQUARE

MILL SAW-1RE

Item No.

4907111

4907243

4908220

4907545

4907146 4910244

4907278 4910074

4908225 4908230

4907561

4907154 4907162

4907280

HALF ROUND WOOD Item No.

MULTIFILE Item No.

4907900 4908134

4909505 4909513

INCHES

CUT DESCRIPTION

SLIM TAPER Item No.

EX. SLIM TAPER Item No.

5" 6" 7" 8" 10" 10" 12"

2ND 2ND 2ND BASTARD BASTARD 2ND BASTARD

4907669 4907685 4907707

4907812 4907839 4907855

4909521 4908444

FARMERS OWN SP

10"

ORDER QTY CUT INCHES

4" 4" 4" 6" 6" 6" 8" 8" 8" 10" 10" 10" 12" 12" 12" 14" 14" 14"

4909556 12 (6 > 12") FLAT

12 (6 > 12") HAND

12 (6 > 12") HALF ROUND

12 (6 > 12") ROUND

12 WARDING

DESCRIPTION

Item No.

BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH

4900001 4900028 4900036 4900044 4900052 4900060 4900079 4900087 4900095 4900109 4900117 4900125 4900133 4900141 4900168 4900176 4900184

4900214 4900222 4900230 4900249 4900257 4900265 4900273 4900281 4900303 4900311 4900338 4900346 4900354 4900362 4900370 4900389 4900397 4900419

4900443 4900478 4900508 4900516 4900532 4900559 4900575 4900591 4900613 4900648 4900664 4900680 4900702 4900729 4900745 4900761 4900796 4900826

4900885 4900907 4900923 4900990 4901016 4901032 4901059 4901075 4901091 4901113 4901148 4901164 4901180 4901202 4901229 4901245

4901997 4902012 4902039 4902101 4902136 4902152 4902179 4902195 4902217

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

engineers files

CUT

VALLORBE

ORDER QTY

248

engineers files

ENGINEERS FILES - PRE PACKED ORDER QTY CUT

vallorbe

engineers files

INCHES

4" 4" 4" 6" 6" 6" 8" 8" 8" 10" 10" 10" 12" 12" 12"

Item No.

BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH BASTARD 2ND SMOOTH

4901342 4901369 4901385 4901393 4901415 4901431 4901466 4901482 4901504 4901520 4901547 4901563 4901598 4901628

4901717 4901725 4901733 4901741 4901776 4901792 4901814 4901830 4901857 4901873 4901903 4901938

CUT

4" 5" 6" 7" 8" 8" 10" 10" 12" 12" 14"

INCHES

12 SLIM TAPER

4901970 12 EXTRA SLIM TAPER

DESCRIPTION

Item No.

2ND 2ND 2ND 2ND BASTARD 2ND BASTARD 2ND BASTARD 2ND BASTARD

4904627 4904678 4904694 4904716

4904813 4904864 4904880 4904902

4904732

4904929

DESCRIPTION

6" / 150 8" / 200 8" / 200 8" / 200 8" / 200 8" / 200

12 (6 > 12") MILLSAW-1RE Item No.

12 (6 > 12") MILLSAW-2SE Item No.

4902764 4902780 4903094 4903116

4902829 4902845

4903132 4903159

4902896 4902926

4903175 4903191

4902969 4902985

12 (6 > 12") HALF ROUND WOOD RASP

12 (6 > 12") HALF ROUND CABINET RASP

Item No.

4905976

4906026 4906158 4906042

Item No.

4905593 4905615 4905631 4905666 4905682 4905720

4905916 4905917 4905924 4905929 4905934

Item No.

4908991 4906123

1 TWINPACK CHAINSAW

12 FARMERS OWN

4908975

4905992

12 CHAINSAW

ORDER QTY

1/8 5/32 3/16 7/32 1/4 5/16

12 (6 > 12") 3 SQUARE

DESCRIPTION

ORDER QTY INCHES

12 (6 > 12") SQUARE

12 CONTACT POINT Item No.

4908762

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

249

engineers files miscellaneous

SIZE

DESCRIPTION

Item No.

4" Rd, 3Sq 4" Sq; 5" Rd, 3Sq, Sq; 6" Rd 4" Fl, Wd, Knf, Hfrd; 6" 3Sq, Sq 6" Fl, Wd, Knf, Hfrd; 8" Rd, 3Sq, Sq 8"Flat, Warding, Knf, Hfrd 10" Rd, Sq; 12" Rd 10" Fl, Wd, Knf, Hfrd, 3Sq 12" 3Sq, Sq 12" Fl, Wd, Hfrd, 14" Rd, Fl, Wd 14" 3Sq, Sq; 16" Rd

4910902 4910910 4910929 4910937 4910945

NO.6 NO.7 CHAINSAW FILE HANDLE

4910953 4910961 4911003

ORDER QTY FILE HANDLES

T003-160-2 T006-160-2 T007-160-2 T009-160-2 T0010-160-2 T0011-160-2 T014 -160 -2 T0015-160-2 T0016-160-2

CROSSING WARDING 3 SQUARE OVAL ROUND BARRETTE SLITTING CROCHET PILLAR-ROUND EDGE

4909637 4909653 4909661 4909696 4909718 4909726 4909734 4909742 4909750

NEEDLE FILE SET

T020-6 PIECE SET composed of:T001-T002-T006-T007-T008-T010 T060-12 PIECE SET composed of:T001-T002-T003-T005-T006-T007-T008-T009-T010-T011-T015-T016

4911046 4911062

FILE SETS

3 PIECE FILE SET NO.1 5 PIECE FILE SET NO.1

1 each:- 8" Bast.Flat; 8" Bast.1/2 Rd; 8" Bast.Rd 1 each:- 8" Bast.Flat; 8" 2nd 1/2 Rd; 8" Bast.Rd 8" Bast.Sq; 8" Bast.Millsaw 1RE

4911105 4911234

MULTIFILES - suitable for aluminium,brass,copper

8" MULTIFILE 4909300 10" MULTIFILE 4909327 12" MULTIFILE 4909343 Abbreviation: Rd = Round; Sq = Square; 3Sq = Three Square; Fl = Flat; Wd = Warding; Knf = Knife; Hfrd = Half Round, Bast = Bastard

FREE PHONE 0800 553 236 | FREE FAX 0800 708 677 | E-MAIL sales@evacut.co.nz

vallorbe

NO.1 NO.2 NO.3 NO.4 NO.5

engineers files

FILE HANDLES