FläktGroup – ‘Treating air means mastering it’

When it comes to providing heating, cooling, filtering, humidification and dehumidification, FläktGroup offers highly-efficient air treatment and control solutions that deliver the optimum indoor environment combined with maximum energy efficiencies. In addition, and especially in the highly-sensitive areas of clinical and clean room applications, these solutions also satisfy all international standards and achieve high rankings in the classification of the “Eurovent Compliance Committee for Air Handling Units”.

Unlike radiators and classical flat radiators, FläktGroup fan-coil units not only heat rooms, but cool and ventilate them. They offer all the possibilities of demand-controlled ventilation (DCV) and can be employed everywhere where comfortable warmth, cooling or air ventilation, with a rapid adaptation, is required.

FläktGroup fan-coil units actively guide the air to be processed through the heat exchanger, whereby it is heated and cooled effectively. They bring the room air to the desired temperature faster and operate with smaller heating or cooling surfaces. Their enhanced heat transfer enables lower feed temperatures during heating, and higher feed temperatures during cooling. This minimises losses and saves energy between the boiler or the chiller and the final unit. The range is extensive with three of the latest additions being the HyPower-Geko, the HyFlex Geko and the HyCassette and Cassette Geko units. Brief details of each are as follows.

HyPower-Geko – These compact units are installed in a discreet position above a suspended ceiling and can be connected to both the heating and chilled water supply grid. Despite the high power capacity, HyPower is distinguishably quiet. The modular construction allows a flexible design.

The ISYteq control system combines advanced technology with simple operation and commissioning for maximum comfort and energy efficiency.

HyPower comes in three versions – with or without fan chamber, as well as with fan chamber and inner acoustic insulation. Among the 2-pipe systems, there are three capacity stages with up to six tube rows available. For the 4-pipe systems there are two selectable capacity stages.

HyFlex-Geko – This unit creates a new level of flexibility and performance. During its development, every single technical component was optimised to maximise performance. As a result key benefits are flexibility, high performance, hygiene, quick selection, simple installation and easy maintenance.

HyCassette – This new type of fan coil unit with swirl air outlet technology sets new industry benchmarks. By meeting the highest comfort standards with its intelligent control system and its attractive design, this system is the answer to all air handling requirements.

ISYteq – ISYteq Touch 4.0 is a microprocessor-based, programmable electronic controller that enhances the control of any facility for the developer, building owner, installer and facility manager. The modern tile layout makes navigating the system very easy and the touchscreen offers precision control to enable low fan noise or boost heating and cooling. Available in black or white frames.

Contact: Mario Oliveira, FläktGroup. T: 01 463 4600; E: mario.oliveira@flaktgroup.com