HVAC solutions provider

Sweeney’s Corner project

Euro Gas – the complete energy centre and HVAC solution provider

Euro Gas was awarded the order for the supply of the mechanical services equipment for the 235-bed student residence on Sweeney’s Corner in the Newmarket area of Dublin 8.

The development spans four blocks of accommodation with varying numbers of floors above ground. Each of the individual buildings comprises student accommodation on top, with retail units located below on the ground level. The main plantroom is located on the roof and features a total load of 740kW of combined boiler and air to water output.

Main contractor was BAM Construction while the mechanical contractor was Dominic O’Connor Ltd with Ethos Engineering acting as the M&E consultant.

Dominic O’Connor Ltd commented: “Euro Gas products and packaged plantrooms are of an exceptionally high standard. However, what gives us peace of mind is their technical ability to back up all of their products, and the advice they provide on the best way to integrate various technologies, from gas boilers to air to water heat pumps, to ensure the system runs as efficiently as possible. We look forward to working with them on more projects in the near future.”

Scope of delivery

Euro Gas provided the mechanical services equipment across the entire project, including: • Pak Plant packaged plantroom; • Remeha Quinta Ace boilers; • Cordivari buffer tanks; • Grundfos pumps and pressurisation units; • Hidros LHA air to water heat pump; • Fortes heat interface units; • Gas Sense gas detection system.

Euro Gas Ltd is the leading company in the HVAC sector throughout all of Ireland. Established in 1985, the aim is to always provide customers with the highest degree of technical services and sales support. This extends not just to the production values of the system, but also to system design, application of products, and the speed with which these enquiries are handled.

Euro Gas Ltd is committed to offering its customers high performance, energy and cost-saving heating, ventilation and air conditioning products to cater for all project types.

Contact: Euro Gas. T: 01 286 8244; E: sales@eurogas.ie; www.eurogas.ie

Hidros air to water heat pump installed at Sweeney’s Corner student accommodation development.

Single and twin impellar centrifugal pumps

www.calpeda.com

Centrifugal pumps are very common because their characteristics are perfect for multiple uses covering everything from water supply and irrigation systems through to civil and industrial applications, fi re-fi ghting, heating, air-conditioning, cooling and circulation systems. In answer to the requirements of all these sectors, the Calpeda N/NM pump range offers quality and performance in a multitude of models, meaning that clients can always fi nd the most suitable solution for their needs. They are the result of signifi cant research involving both mechanical and fl uid dynamics’ characteristics, as well as on the materials used and the product designs. Key product ranges within the full portfolio of single and twin impeller centrifugal pumps are the N and N4; NM and NM4; NMS and NMS4.

MODELS N & N4

Single-stage end-suction centrifugal pumps with bearing bracket. The electropumps N, B-N, N4, B-N4 series comply with the European Regulation No 547/2012 in force, starting from 01.01.2013.

Nominal duty points and main dimensions are in accordance with EN 733.

Back pull-out construction for simple and quick dismantling and reassembly.

N, N4: Version with pump casing and lantern bracket in cast iron.

B-N, B-N4: Version with pump casing and lantern bracket in bronze (the pumps are supplied fully painted).

water passion …

Applications

Clean liquids, without abrasives, which are non-aggressive for the pump materials (contents of solids up to 0.2%) Water supply Heating, air conditioning, cooling and circulation Civil and industrial applications Fire-fighting applications Irrigation Agriculture Low noise requirement Commercial buildings Sewage/slurry disposal Food and beverage Chemical/pharmaceutical

think outside the box!

Contact Calpeda Pumps (Ireland) Ltd.

Unit 5, Old Quarry Campus, Blanchardstown, D15 Y4EK

Tel: 00-353-1-8612200 Fax: 00-353-1-8612203 Email: info@calpedaireland.com

MODELS NM4 & NMS4

Close-coupled centrifugal pumps featuring electric motor (up to 15kW) with extended shaft directly connected to the pump. New bracket construction for standard motors (stub-shaft construction) from 18.5kW to 75kW with integrated thrust bearing. Pump casing with axial suction and radial delivery on top. Main dimensions and performance according to EN 733 with additional sizes for completion.

MODELS

NM & NMS

Close-coupled centrifugal pumps featuring electric motor (up to 30kW) with extended shaft directly connected to the pump. New bracket construction for standard motors (stubshaft construction) from 37kW to 75 kW with integrated thrust bearing. Pump casing with axial suction and radial delivery on top. Main dimensions and performance according to EN 733. NM: Version with pump casing and lantern bracket in cast iron. B-NM: Version with pump casing and lantern bracket/casing cover in bronze (the pumps are supplied fully painted).