Pop it ups cardmaking winter 2016 by Pat McDonald

Winter 2016

cardmaking

10 step-by-step card projects by Karen Burniston and the design team Fran Sabad X Kelly Booth X Sandy Diller X Caz Counsell X Karen Aicken Shelly Hickox X Raquel Mason X Frances Byrne X Summer Hills-Painter

http://karenburniston.com

shop

Visit my blog for more Pop it Ups inspiration, plus links to my YouTube channel, Facebook Page, Pinterest Boards, monthly newsletter and more!

http://www.elizabethcraftdesigns.com

Visit the Elizabeth Craft Designs website for more product information, online shopping plus a store locator.

create

Back in the early nineties, before the turn of the century, I decided not to travel home for a college summer break. I reasoned that the drive from New Orleans to my home state of Oregon would take several days and my cheap car wasn't likely to survive another trip across the Rockies. I applied for a summer job as a lifeguard and spent my days off with one of my engineering classmates, John, who had also stayed in town for the summer. Little did I know how much that summer would influence my future life. John had a part-time job doing contract CAD work after hours for a drafting company and since my rattletrap car was still better than the bus, he talked his boss into hiring me, too, so he always had a ride to work. Four years later John and I were married. We rented a duplex apartment in the Lakeview area of New Orleans, a three-bedroom, which meant I could have my first dedicated craft room. I was an avid rubber stamper back then, and would seek out local stamp stores whenever I traveled. In one such store I saw a pop-up card on display. It was just a simple box pop-up, but for me, it was a spark. I dusted off my CAD skills from that summer job and started drafting pop-up templates. I started teaching my card designs to my local stamp club and sending handmade pop-up cards to all my friends and family. The Lakeview apartment was eventually traded in for our first house and sadly, many years later, it was flooded and destroyed by Hurricane Katrina. Eventually my pop-up templates turned into steel-rule dies and then further evolved into wafer-thin designs called Pop it Ups. I've expanded the brand to include companion products, such as embossing folders, clear stamps and stencils. Pop it Ups products are licensed and distributed worldwide by Elizabeth Craft Designs, a family-owned Colorado-based company. If you are either a seasoned or a budding crafter and have access to a personal die cutting machine you have what you need to get started with Pop it Ups dies. The members of my Design Team are talented, creative and all-around lovely people who have been on this journey with me for years. They come from four countries and five states and do an excellent job keeping the internet stocked with Pop it Ups inspiration. Check out the blogs of these talented crafters and you'll see what I mean! I invite you to try your hand at the projects in this book and see if this will be your spark to enter the exciting and fascinating world of handmade pop-up cards.

learn

a letter from Karen

Pop it Ups dies have alignment nubs to place anywhere along the fold of any size card. Use Pop it Ups in all major die cutting machines that can accommodate a wafer thin die.

Pop it Ups cardmaking | Winter 2016. Copyright ÂŠ2016 by Karen Burniston. All rights reserved. Contributed projects and photos are used with permission. Readers are permitted to make the projects contained herein for personal use and to teach as class projects with proper credit given to the designer in the class description. Any other commercial use of the projects, such as selling at a craft fair, requires prior permission from the designer. Every effort was made to properly credit product names and manufacturers. The information is presented in good faith, however, no warranty is given on the accuracy or results of the instructions.

Pop it Ups cardmaking | Winter 2016

table of contents Kelly Booth Sandy Diller Raquel Mason

we should hang out

Oval Pull Card......................................... 4 steampunk coffee

Cup Pop Stand Card............................... 6 what's up?

Pull Tab Card........................................... 8 happy cake day

Karen Aicken

Oval Pull Card....................................... 10

Summer Hills-Painter

what's up?

Frances Byrne Fran Sabad Caz Counsell Shelly Hickox Karen Burniston

Butterfly Pivot Screen Card.................12 cheeky monkey

Cake Pop up Card..................................14 farm fresh

Barrel Basket Card................................ 16 woodland animals

Oval Landscape Accordion Card........ 18 adventure awaits

Hot Air Balloon Card............................20 bonjour

Hanging Charm Pull Tab Card........... 22 Pop it Ups cardmaking | Winter 2016

we should hang out

Oval Pull Card by Kelly Booth

The Oval Pull Card die set includes slot and slider dies that can be used (optionally) to create fun movement inside the card. As this card opens the monkey slides across the card and reveals an area for a personal greeting.

CARD DIMENSIONS closed: 5” X 5.5” (12.7 cm x 14 cm)

open: 8” x 5.5”

(20.3 cm x 14 cm)

Kelly Booth

http://cruzinkellster.blogspot.com Hi, I’m Kelly Booth, from Arizona, where I live with my husband Dale and new Shih tzu puppy Sassi. I have been a stamper and card maker for over twenty years and I love using Pop it Ups dies to add an extra element of surprise to the cards I send. When I’m not in my craft room coloring up a storm with my Copic markers I enjoy camping, traveling, spoiling my grandkids and adding to my owl collection.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups™ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 1109 Oval Pull Card

X 1110 Pull Card Edges X 1107 Jinks the Monkey X 987 Palm Tree and Pail X 914 Outdoor Edges X 911 Props 1

CLEAR STAMPS

X CS013 Cheeky Monkey

Elizabeth Craft Designs CARDSTOCK

Die cut the following pieces: (1) large oval and (1) palm tree trunk from brown. For the palm tree, use the stencil feature with a brown marker before removing the paper from the die to add markings to the trunk; (1) small oval, (1) large oval and (4) bananas from Soft Finish white; (1) palm tree leaves from green; (1) slider arm from red. Stamp the greetings onto the white oval in black ink. Color the bananas with markers. (see image 2)

X PSF102 White 100lb Soft Finish Cardstock

CLEAR DOUBLE-SIDED ADHESIVE X 508 Tape, 64 mm X 506 Tape, 6 mm

SILK MICROFINE GLITTER X 607 Chocolate X 639 Warm Diamond

Other Supplies

X Red, Kraft, Brown, Lime Green cardstock X Markers (for bananas) X Die cutting machine X Liquid Adhesive X Acrylic block & black ink

INSTRUCTIONS

1. Cut a piece of red cardstock to 8” x 5.5” (20.3 cm x 14 cm) and score in

the center at 4” (10.2 cm). Place the Oval Pull Card die over the center fold with the alignment nub even with the top of the card. Secure the die with removable tape and die cut. Fold the card in half and then back fold around the oval to create the flip card.

Open the card flat and face down. Place a slot die toward the top of the oval, approximately an inch from the center fold. Secure with removable tape and die cut. (see image 1)

Place the brown oval centered over the red oval and mark through the slot with a pencil onto the back of the brown oval. Repeat with the white sentiment oval. Line up the slot die over the pencil marks to cut slots into both decorator ovals. (Hint: the die set comes with two identical slot dies to streamline this process) Adhere the white oval to the brown oval, lining up the slots, and then add the ovals to the card, again lining up the slots.

Props 1 lips and add Warm Diamond glitter, polishing the glitter well. Assemble the monkey with the tail at the top. For added dimension, inlay the glittered nostrils.

Add 6mm tape inside the red slider arm, fold over and seal. Thread the slider arm through the slot from inside the card and adhere the end under the front fold of the card. Cut a piece of kraft cardstock to 4.75” x 5.25” (12.1 cm x 13.3 cm) and mark the center at 2.375” (6 cm) with a pencil. Place the Pull Card Edges die (oval shape) with the straight edge on the pencil line and die cut. Flip the die to the other side and repeat, creating the frame pieces for the card. Use a scrap of kraft cardstock to die cut the wavy edge die from the Outdoor Edges to be the sand below the tree. With adhesive only on the sides of the piece, attach it to the bottom of the left frame and trim to fit. Adhere the large kraft frame pieces to each side of the oval using 6mm double-sided tape. Assemble the palm tree on the front of the card, tucking the trunk under the sand and placing the leaves in a location where they will not impede the flipping oval when the card is opened. Add bananas to the tree and the sand. (see image 3)

Add 64mm Double-Sided Adhesive tape to a 2.5” x 4” (6.4 cm x 10.2 cm) piece of brown cardstock, peel up the liner and pour Chocolate glitter over the piece, polishing well with your fingers to set the glitter into the adhesive. Die cut the monkey detail layer and tail detail from the glittered piece. Retain the nostrils.

6. Cut the monkey and tail shadow

layers from kraft cardstock and set aside. Add Double-Sided adhesive tape to a piece of kraft cardstock and cut the monkey face, belly and the ears of the detail layer. Also die cut white eyes and a red mouth. From a scrap of red cardstock with Double-Sided Adhesive applied to the back, die cut a pair of

Add the finished Jinks the Monkey to the slider arm inside the card using liquid adhesive under his hand and tail Test the location first to make sure he looks good in both the closed and open position. Add a banana to his hand. Add the decorator white oval inside the card.

Pop it Ups cardmaking | Winter 2016

steampunk coffee

Cup Pop Stand Card by Sandy Diller Pop Stand dies create standing pop-ups that are viewed with the card opened up to 180º. The Cup Pop Stand die is perfect for coffee, tea, hot chocolate and more!

CARD DIMENSIONS closed: 5.5” X 5.5” (14 cm x 14 cm)

open: 5.5” x 11” (14 cm x 28 cm)

Sandy Diller

http://www.sandydiller.blogspot.com Hi, I’m Sandy Diller and I’m happily retired living in sunny Arizona with hubby, Mac. We like spending our summers in the RV traveling around the US and Canada. When we’re not traveling I like spending time with friends & swimming. Since starting my blog in 2011, card making and mixed media have been my focus. I enjoy all styles when it comes to cards and the Pop it Ups line sure makes it easy to be creative.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups™ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 1103 Cup Pop Stand X 1110 Pull Card Edges X 917 Clock and Gears X 904 Ring Accordion (for small circle die)

CLEAR STAMPS

X CS010 Coffee & Tea

EMBOSSING FOLDER X KB107 Coffee Bean

Elizabeth Craft Designs X PSF102 White 100lb Soft Finish Cardstock

Other Supplies

X Kaisercraft Steam Engine paper X Mini brads and metal gears X Brown cardstock and Vellum X Heat tool & embossing powders Copper and Silver X Ranger Distress Paint - Antique Bronze and Vintage Photo X Ink pads: Ranger Vintage Photo Distress Ink, black Archival ink, Watermark (embossing) ink. X Acrylic block X Die cutting machine and embossing mat

above and below the handle, (2) half circles, (1) spoon, (4) coffee beans. Measure the height of the trimmed cup and cut a piece of cardstock to that height. Cut the sides at an angle to create a trapezoid that is 1 5/8” (4.1 cm) at the top and 0.75” (1.9 cm) at the bottom. Die cut the following pieces using the Clock & Gears die set: (2) clocks, (2) large gears cut from the centers of the clocks, (2) small gears, cut while nested into the small circle die from the Ring Accordion, (1) small gear, (1) small clock hand. Tape the two half circles together with removable tape and then die cut the Pop Stand die into them, lining up the alignment nubs over the seam. Before removing the die, run back through the die cutting machine with an embossing sandwich to highlight the score lines in the saucer. Die cut the steam. (see image 1)

1. Use vellum for the steam and Soft Finish Cardstock for all other pieces in this step. Using the Cup Pop Stand die set, die cut the following pieces: (3) cups, trimming one cup horizontally

the clock hand lightly with Vintage Photo Distress ink. Decorate one of the cups with the trapezoid, die cut gears, clock hand, metal gears and evenly spaced brads to resemble rivets as shown. (see image 3)

4. Cut a 5.5” x 11” (14 cm x 14 cm) piece

of Steam Engine paper and score in the center to create a square top fold card. Cut the upper edge using the oval Pull Card Edges die and stamp the word “Coffee” on the front of the card. Cut a 2” x 5.5” (5.1 cm x 14 cm) piece of brown cardstock and emboss with the Coffee Bean folder. Add the panel inside the card at the bottom edge. Create the front of the card by placing the clock around the stamped word and filling in with gears.

5. With the card open fully flat, adhere 2.

Paint all pieces with a combination of Antique Bronze and Vintage Photo. Apply the paint with a flat stencil brush or a blending tool. For the clocks, gears and coffee beans, sprinkle copper embossing powder over the pieces while the paint is still wet and then heat the powder until it bubbles to create texture. When cool, edge the pieces with black archival ink. (see image 2)

the two half circles meeting at (but not crossing) the fold. Add the two cups to the tabs in the saucer, handles toward the right. Attach the steam to the back of the front cup and then run a thin line of glue along the inside rim of a cup and attach the cups to each other. Finish the interior decoration with the coffee beans and the spoon.

Cut one of the clocks in half and add each half to one of the half-circles. Fold the tabs up. Sponge embossing ink over the spoon, cover with silver powder and heat until it bubbles. When cool, edge with black archival ink. Ink Pop it Ups cardmaking | Winter 2016

what’s up?

Pull Tab Card by Raquel Mason The Hanging Charm Pull Tab die set has many assembly options. Four small charm dies come included with the set and can be hung in the frame. Another option is to use the frame to animate an object, as Raquel did here with the hot air balloon. When oriented as a rear pull, the die reveals an area for a hidden greeting.

CARD DIMENSIONS 4.5” X 5.5”

(11.4 cm x 14 cm)

Raquel Mason

http://raquelmason.blogspot.com My name is Raquel Mason and I live in Sunny Florida. I was introduced to stamping and card making 10 years ago by a friend who convinced me I’d be good at it. My friend was right and I also enjoy teaching others how to make cards. I love to make pop up cards because they give that little extra something special.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

From the Hot Air Balloon set die Pop it Ups™ by Karen Burniston cut a gray solid balloon, an orange for Elizabeth Craft Designs detail piece, a red scalloped stripe, a DIE SETS blue hanging basket and a gray hanging X 1104 Hanging Charm Pull Tab basket. Also die cut (2) large white X 1106 Hot Air Balloon clouds and (3) small white clouds. X 1111 Trellis Wavy Frames Highlight the clouds with black CLEAR STAMPS pen detailing. (see image 1) X CS012 What’s Up? Assemble the balloon as shown here, starting with Elizabeth Craft Designs the gray solid balloon, then CARDSTOCK X PSF102 White 100lb Soft Finish the orange detail piece. Cardstock Add the blue hanging basket CLEAR DOUBLE-SIDED ADHESIVE by adhering the scalloped X 506 Tape, 6 mm section to the front of the PEEL-OFF STICKERS orange piece and tucking the X 7018 Black/Silver Glitter Dots two center strings behind the balloon. Trim the gray basket Other Supplies and glue over the blue. Use X Red, Gray, Blue, Orange cardstock a black pen to trace the orange X Colored markers & black pen stripes before adding the red banner X Die cutting machine X Liquid Adhesive stripe. Add five black glitter dots to the X Acrylic block & black ink red piece as shown.

INSTRUCTIONS

Cut a 4.5” x 5.5” (11.4 cm x 14 cm) piece of gray cardstock, a 3.5” x 4.5” (8.9 cm x 11.4 cm) piece of blue cardstock and a 3.25” x 4.25” (8.3 cm x 10.8 cm) piece of white Soft Finish Cardstock. From the Trellis Wavy Frames set, die cut a blue spotted frame and (4) orange corners. From the Hanging Charm Pull Tab set, die cut a red card base and an orange pull tab. Turn the red card base over and add 6mm tape to the sides of the piece. Also add 6mm tape to the bottom center section of the orange pull tab making sure there is no tape in the wing tabs that will slide behind the red. (see image 1)

base. Pinch the fold to make a crisp mountain. Locate and work the valley fold near the bottom of the card base that starts the mountain shape. Stamp the “what’s up?” greeting in the revealed white area. Color the letters with markers. (see image 3)

With the tab still pulled, place the blue frame against the front half of the mountain to determine where to stop the adhesive. Mark in pencil on the back of the blue frame and then add liquid adhesive to the frame in all areas below the line. Attach the blue frame to the red mountain, making sure the base of the frame does not cross the fold at the base of the mountain. (see image 3)

Peel up the tape liner at the base of the orange pull tab and adhere it, centered, to the bottom of the red card base. To make sure the orange piece is centered, first weave the pull tab through the slot on the red piece and make sure an equal amount of space is visible on either side of the tab. Stamp the “flying by” stamp in black ink onto the orange piece. (see image 2)

6. Adhere two small clouds to the hot

4. Peel up the tape liner behind the

air balloon and then add the finished balloon to the blue frame at an angle, referring to the photo for placement and using adhesive only where the balloon will touch the frame. Add a large cloud and small cloud to the left side of the frame, making sure to place everything in a location where the “flying by” greeting can still be read. Add the final large cloud to the end of the pull tab as a handle.

red card base and attach it, centered, Adhere the interactive card to the to the white cardstock panel. Pull the blue panel and then to the gray panel. orange tab and find the location of the Add the orange corner pieces and center mountain fold in the red card embellish with black glitter dots. Pop it Ups cardmaking | Winter 2016

happy cake day

Oval Pull Card by Karen Aicken The Pop it Ups Character die sets all feature easy assembly with a shadow layer, detail layer, signature big eyes and accessory pieces. Baker the Beaver works perfectly sliding across the Oval Pull Card and embellished with the baking-themed Props 8.

CARD DIMENSIONS closed: 4.25” X 5.5” (10.8 cm x 14 cm)

open: 7.25” x 5.5” (18.4 cm x 14 cm)

Karen Aicken

http://alteredscrapbooking.blogspot.com Hi, I’m Karen Aicken, from Alberta, Canada. I bought my first rubber stamp (a PSX rose) 26 years ago and was hooked! I have made every one of our family’s cards since then. I love it all - stamps, stickers & Peel-Off’s, paper, cardstock and DIES! I especially like making pop-up and interactive cards. We have 2 furry kids and 4 wonderful grandchildren who we love to spend time with. We also enjoy getting away to the mountains.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups™ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 1109 Oval Pull Card

X 1101 Baker the Beaver X 1102 Cake Pop Up X 1100 Props 8

CLEAR STAMPS

X CS011 Just a Note

Elizabeth Craft Designs PAN PASTELS

X 30117 Susan’s Garden PanPastel Flower Coloring Kit #3

CLEAR DOUBLE-SIDED ADHESIVE X 508 Tape, 64 mm X 506 Tape, 6 mm

SILK MICROFINE GLITTER X 639 Warm Diamond

Other Supplies

X Brown, White, Cream cardstock X Carta Bella Home Sweet Home Patterned Cardstocks X Colored pencils (for greeting) X Die cutting machine X Liquid Adhesive X Acrylic block & black ink X Fine point black marker X Glitter glue X Foam tape

INSTRUCTIONS

1. Cut a piece of patterned cardstock

(1) large oval, (1) Baker shadow layer and (1) set of whiskers from brown cardstock; (2) cupcake frosting layers, (1) cupcake base, (1) spatula, (1) Chef's hat, (1) Baker detail layer, tail, nose, and feet, (1) smaller oval, (2) scalloped frosting pieces, and (1) cake stand from cream cardstock; (1) set of eyes and (1) set of teeth from white cardstock; both cake layers from polka dot patterned paper; (1) slider arm from teal patterned paper, (1) large oval from patterned paper. (see image 1)

3. Add Double-Sided Adhesive tape

to the slider arm and fold it over and secure, making a sturdy arm. Using a foam applicator with PanPastels, lightly add pink and brown to Baker the Beaver's pieces and color his nose with a black marker. Assemble Baker as shown leaving his front paws free from adhesive. Use a fine point marker to add freckles and pen detailing to the ears. Also add pen detailing to the Chef's hat and adhere it to his head. Apply pink and brown PanPastels to the cupcake frosting pieces and base. Add pen detailing to one cupcake frosting piece, assemble the cupcakes, and adhere one under Baker's paws. (see image 2)

to 7.25” x 5.5” (18.4 cm x 14 cm) and score at 3.5” (8.9 cm) from the left side. Place the Oval Pull Card die over the fold with the alignment nub even with the top of the card. Secure the die with removable tape and die cut. Fold the card on the score line and then back fold around the oval to create the flip card.

to the front of the card. Lay the cake pieces onto the oval to determine the position of the slot. Tape the slot die in place with removable or washi tape. Remove the cake pieces, open the card up flat and roll through the die cutting machine to cut the slot through both layers. Adhere the cake pieces onto the oval, adding a trimmed top portion of a cake stand behind the bottom layer and using foam tape under the upper tier for dimension. Add the scalloped frosting pieces, top with the cupcake, and embellish with glitter glue. (see image 3)

Stamp the greeting onto 2. Using dies from all four die sets, cut 4. the cream oval by selectively

the following pieces: (1) cupcake base,

5. Adhere the patterned paper oval

inking the "happy cake day" words one at a time to stack them. Color "cake" with colored pencils. Apply pink and teal PanPastels to the spatula. Adhere the cream oval to the brown oval and adhere the spatula as shown. Add glitter glue over the word "cake" and set aside to dry.

Thread the slider arm through the slot from inside the card and use Double-Sided Adhesive tape to secure it under the left flap of the card at a slight angle as shown. Open the card, add tape to the other end of the slider arm and adhere Baker the Beaver. As the card opens, Baker will slide across the card. Position the greeting oval inside the card in a position that is hidden when the card is closed.

Pop it Ups cardmaking | Winter 2016

CARD DIMENSIONS closed: 4” X 6”

(10.2 cm x 15.2 cm)

open: 12” x 6”

(30.5 cm x 15.2 cm)

what's up?

Butterfly Pivot Screenby Summer Card Hills-Painter

Summer puts a unique twist on a screen card by cutting a Pivot Card into the interior pages. This card blueprint can be used with any of the Pivot Cards in the Pop it Ups collection.

Summer Hills-Painter

http://1craftypainter.blogspot.com Hello everyone! My name is Summer Hills-Painter and I live in South Carolina. I am a mother to three spirited and handsome little boys and wife to a wonderful husband, Shawn. I have been crafting all of my life in some form or another. My passion for crafting started with my very talented and creative mother. She helped me to see past what things are and envision what they can be. I began paper crafting in 2000 and immediately became addicted. Things have certainly changed since then and using Pop It Ups line allows me to easily take my projects to the next level.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Upsâ&#x201E;˘ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 767 Butterfly Pivot Card X 771 Accordion Fancy Label X 782 Agatha Edges X 1105 Barrel Basket X 773 Butterfly Accessory

CLEAR STAMPS

X CS012 What's Up?

Elizabeth Craft Designs PEEL-OFF STICKERS

X 7018 Transp/Silver Glitter Dots

Other Supplies

X Heavyweight shimmer cardstock X Cardstock colors: light pink, lime green, aqua, dark pink, woodgrain, and silver X Patterned papers - geometric plaids/stripes, light blue X Vellum X Acrylic block and black ink X Markers or colored pencils X Brown and blue ink X Die cutting machine

Using the dies in the Barrel Basket set, die cut a basket, bands and hand grip from woodgrain cardstock. Ink the hand grip and bands with dark brown ink. Die cut a handle from silver cardstock. Assemble the basket by adhering the bands to the basket first, then the handle and then the hand grip. Fill the basket with all the small butterflies.

Refer to the large photo for placement of the decorator pieces. Add the three flourishes across the top of the card and embellish with glitter dots. Add the two largest layered butterflies to the large butterflies in the card.

Stamp the "flying by to say" greeting in the lower right corner of the final panel of blue paper. Adhere it to the card. Attach the Barrel Basket to the left of the greeting. Add the two medium layered butterflies above the basket. (see image 3)

INSTRUCTIONS

Cut a 12" x 6" (30.5 cm x 15.2 cm) strip of heavy shimmer cardstock and score for folding at 4" (10.2 cm) and 8" (20.3 cm) to create a tri-panel card. Also cut three pieces of light blue patterned paper to 3.75" x 3.5" (9.5 cm x 8.9 cm) and ink the edges with coordinating blue ink. From the various colors of cardstocks, patterned papers and vellum, die cut numerous butterflies, layer them using adhesive in the centers and embellish with Glitter Dots. From aqua cardstock, die cut three flourishes from the Agatha Edges set and trim off the outside swirls to shorten the flourishes to fit the panels of the card. (see image 1)

3. Accordion fold the card closed

and use a decorator label die from the Fancy Accordion set to cut the legs of the card by aligning the center points of the label along the bottom edge of the card. Roll through the machine. Repeat the process to cut the decorative edge at the top of the card, using the smooth edge die from the Agatha Edges set. Add two paper panels to the card using a temporary adhesive. Center the Butterfly Pivot die over the fold of the card, secure with removable tape and die cut the butterflies through both layers. Remove the blue paper panels and carefully snip out the butterflies from both blue panels. Adhere the paper panels back onto the card, taking care to line up the butterfly holes perfectly with the butterflies in the card. (see image 2)

6. Stamp the "what's up?" greeting

in black ink in the lower right corner of the final page. Color the word with markers or colored pencils.

7. Train the Pivot Card by bringing the

center fold (where the butterflies join) into the card, causing the butterflies to pivot at their pivot points. This will send the outer wings through the holes in the card. Carefully fold the card closed, making sure that the large butterflies are pivoting correctly.

Pop it Ups cardmaking | Winter 2016

cheeky monkey

Cake Pop up Card by Frances Byrne

From birthdays to weddings you’ll reach for the Cake Pop Up die set for dynamic celebratory cards that are sure to impress. The die set includes candles and strawberries perfectly sized to top the cake.

CARD DIMENSIONS closed: 4.75” X 6” (12 cm x 15.2 cm)

open: 4.75” x 12” (12 cm x 30.5 cm)

Frances Byrne

http://stampowl.blogspot.com Hi, I’m Frances Byrne from ‘downunder’ Australia. I live with my wonderfully supportive husband of over 40 years; Phil. My blog’s name StampOwl is not because of any late night stamping sessions (although I have been known to do that at times), but rather it combines my two favourite hobbies - stamping & collecting owls. I started stamping and card making over 25 years ago and have always enjoyed creating cards that do something special. I love using Pop it Ups as they make it so easy to create amazing cards. Phil and I also enjoy record collecting and spoiling our two grandchildren.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups by Karen Burniston ™

for Elizabeth Craft Designs

DIE SETS

X 1102 Cake Pop Up X 1110 Pull Card Edges X 1107 Jinks the Monkey X 1108 Oval Landscape Accordion (for stitched oval die) X 949 Props 2 (birthday hat)

CLEAR STAMPS

X CS002 Homegrown Greetings X CS013 Cheeky Monkey

EMBOSSING FOLDER

on the tan cake and add it over the patterned cake to change the color. Cut a 4.75” x 3.25” (12 cm x 8.3 cm) piece of yellow cardstock and place the oval edge die from the Pull Card Edges set approximately 0.25” (6 mm) from the top of the piece and die cut. Emboss both yellow pieces with the Bananas Embossing Folder and then lightly sponge them with light brown ink. Highlight the bananas using a Copic E31 marker. (see image 2)

X KB106 Bananas

Elizabeth Craft Designs CARDSTOCK

X PSF102 White 100lb Soft Finish

CLEAR DOUBLE-SIDED ADHESIVE X 508 Tape, 64 mm

Other Supplies

X Crate Paper designer paper X Cardstock colors: black, brown, yellow, peach, light green, green, pink, tan X Ink colors: black, light brown X Foam tape or pop dots X Acrylic block X Die cutting machine

INSTRUCTIONS

1. Cut a 4.75” x 12” (12 cm x 30.5 cm)

piece of designer paper and score in the center to make a top fold card. Place the main Cake Pop Up die so that the alignment nubs of the die are directly over the fold, secure with removable tape, and run through a die cutting machine. Cut a 3” x 5” (7.6 cm x 12.7 cm) piece of tan cardstock and cover the back with Double-Sided Adhesive. Die cut the cake and snip at all the connection points to isolate just the cake area from the tan cardstock. (see image 1)

Following the package or video instructions, work the folds to create the pop up cake on both the pop-up card and the tan piece. Peel up the liner

Add Double-Sided Adhesive to the back of the following: X 2.5” (6.4 cm) square of yellow polka dot designer paper X 2.5” x 1.5” (6.4 cm x 3.8 cm) piece of brown cardstock X 2.5” x 1” (6.4 cm x 2.5 cm) piece of yellow cardstock Die cut the Cake rectangles from the polka dot paper, the icing strips from brown cardstock, and the candle flames from yellow cardstock. Die cut the cake stand and the candles from pink cardstock. Decorate the cake referring to the photo for placement Add the embossed bananas panels inside the card.

Add Double-Sided Adhesive to the various cardstock colors for Jinks the Monkey and die cut. Use black for the body and tail shadow layers, brown for the body and tail detail layers, peach for the face, belly and ears (use the detail layer die to cut the ears), white Repeat the embossing process for the eyes and yellow for the banana. from Step 2 with a 4.75” x 2.25” piece (see image 3) of yellow cardstock to create an embossed panel for the front of the card. Attach the embossed panel to bottom of a 4.75” x 6” (12 cm x 15.2 cm) piece of decorator paper. Cut a 4.75” x 12” (12 cm x 30.5 cm) piece of green cardstock and score in the center to create a top fold card. Attach the popup card inside the green backing card adhering one side at a time and avoiding the pop-up areas with adhesive. Add the front decorator panel Add Double-Sided Adhesive to the card. to the various cardstock colors for the Props 2 Stamp the “I am bananas birthday hat and die cut. for you” greeting in black ink Use light green for the solid on Soft Finish cardstock. Also hat, green for the stamp the “Happy Birthday” spotted hat and greeting by masking off pink for the pom the “to ewe” portion and pom. Assemble then stamp “cheeky” and the monkey. Add the “monkey”. Die cut the banana to his upper hand stitched oval die around and the hat on his head the greetings. Sponge the as shown. Adhere the edges of the ovals with finished monkey to the light brown ink and add the ovals front of the card. to the front and inside the card with foam tape or pop dots.

Pop it Ups cardmaking | Winter 2016

farm fresh

Barrel Basketby Card Fran Sabad The Barrel Basket is a simple country basket with lots of possibilities. Position the handle upwards, downwards or not at all. Fill the basket with fruits, vegetables, flowers, hearts or try one of the Character dies peeking out. Use the basket with or without the included pop up die.

CARD DIMENSIONS closed: 4.25” X 5.5” (10.8 cm x 14 cm)

open: 4.25” x 11” (10.8 cm x 28 cm)

Fran Sabad

http://fransabad.com Hi everyone! My name is Fran Sabad and I live in Lexington, Kentucky. I have 3 grown children, 2 dogs, 2 cats and a bunny! I’ve been stamping and scrapbooking for almost 20 years and have been a demostrator for Stampin' Up! for the last 14 years. I simply love Pop It Ups dies! There is nothing better than a card with a surprise in the middle!

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Upsâ&#x201E;˘ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 1105 Barrel Basket with pop up X 1099 Props 7 X 1095 Gift Card Accordion (stitched label) X 782 Agatha Edges X 1097 Lucky the Rabbit (carrot)

the green flowers and place the flowers, platform connects to the card. Return eggs, apples and carrots in and on the the platform to the center position basket as shown. (see image 2) and open the card. Invert the pop up platform so it folds into the card and creates a simple box.

5. For a backing card, cut a 4.25" x

11" (10.8 cm x 28 cm) piece of green cardstock and score in the center for folding. Working one half at a time, adhere the pop up card inside the backing card, lining up the center folds and avoiding the pop-up areas with adhesive. Attach the basket to the front of the pop up platform.

CLEAR STAMPS

X CS011 Just a Note

Elizabeth Craft Designs CARDSTOCK

X PSF101 White 85lb Soft Finish Cardstock

Other Supplies

X Green, Kraft, Brown, Purple, Yellow, Dark Red, Orange cardstock X Stampin Up! patterned papers X Small pearl gemstones X Brown ink X Foam tape or pop dots X Colored markers X Die cutting machine X Liquid Adhesive X Acrylic block & black ink

INSTRUCTIONS

Using the Barrel Basket die set, die cut a basket and handle from Kraft cardstock and the basket bands and handle grip from brown cardstock. Using the carrot dies from Lucky the Rabbit, die cut (3) orange carrots and (3) green carrot tops. Using the dies in the Props 7 set, die cut (3) white eggs, (3) dark red apples, (4) purple flowers, (4) yellow flowers and (8) green flowers. (see image 1)

Cut a strip of vegetable patterned paper to 4" x 10.75" (10.2 cm x 27.3 cm) and score in the center. Cut two squares of purple checked patterned paper to 2.75" x 2.75" (7 cm x 7 cm), and adhere one centered over the fold of the card using no adhesive under the front corner. Using the pop up die included with the Barrel Basket set, line up the alignment nubs directly over the fold of the card, secure with removable tape and roll through a die cutting machine. (see image 3)

Cut a piece of purple spotted patterned paper to 2" x 4" (5.1 cm x 10.2 cm) and cut one edge with the pointed edge die from the Agatha Edges set. Adhere the piece to the top edge of the vegetable paper. Cut a 3.25" x 3.25" (8.3 cm x 8.3 cm) square of Soft Finish cardstock and stamp the greeting in For the front of the card, add a black ink near the top of the square. strip of vegetables paper 2.5" x 5.25" Color the greeting with three shades (6.4 cm x 13.3 cm) next to a strip of of yellow-green markers. green plaid paper 1.5" x 5.25" (3.8 Adhere the white stamped cm x 13.3 cm) and cover the seam piece inside the card between them with a 0.25" (0.6 tucking the top cm) strip of purple edge under the patterned paper. Add purple checked the other square of purple piece. Fold the checked paper and trim the card in half and then, overhang. Die cut the small while folded, locate stitched rectangle from the Ink the edges of the basket, handle the pop up platform Gift Card Accordion set, stamp and eggs. Assemble the basket and add and fold it one way and the sentiment and adhere to pearls to the centers of the purple and then the other to work the front of the card using foam the creases where the yellow flowers. Layer them with tape or pop dots.

Pop it Ups cardmaking | Winter 2016

CARD DIMENSIONS closed: 5.25” x 4” (13.3 cm x 10.2 cm) open: 10.5” x 4” (26.7 cm x 10.2 cm)

woodland animals

Oval Landscape Accordion Card by Caz Counsell The Character dies can be transformed in all sorts of ways. Caz shows an easy way to convert Dutch the Fox and Honey the Bear into sleeping woodland animals. The Oval Landscape Accordion provides the perfect backdrop.

Caz Counsell

http://www.stampingcaz.blogspot.com

I am Caz (Caroline) Counsell and I live in Surrey in the UK. I fell in love with papercrafting over 20 years ago, initially starting with rubber stamping and then moving on to using die cuts as well. I live with my 2 boys, husband and an array of animals and can be found most evenings in my garden inside my Crafty Palace.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups by Karen Burniston â&#x201E;˘

for Elizabeth Craft Designs

DIE SETS

X 1108 Oval Landscape Accordion X 946 Dutch the Fox X 948 Honey the Bear X 781 All Seasons Tree

STAGE IT STENCILS X S002 Flower

Elizabeth Craft Designs

CLEAR DOUBLE-SIDED ADHESIVE X 506 Tape, 6 mm

PEEL-OFF STICKERS

X 7018 Orange/Silver Glitter Dots

Other Supplies

X Green, Yellow, Orange, Brown, White cardstock X White stencil paste and palette knife X Black Pen X Brown & Orange inks plus sponge daubers X Colored pencils X Orange gemstones X Die cutting machine X Woodgrain patterned paper X Liquid Adhesive

side tabs on the right green page. On the two yellow pages, use scissors to remove all tabs and interior parts leaving just a yellow frame. Add orange/ silver Glitter Dots in the centers of some of the flowers. Glue the frames to the back of the green pages.

Using the Dutch the Fox die set, die cut the following pieces: (1) orange shadow layer (trim on the pencil lines shown), (1) orange detail layer (trim away the head, legs and retain the eye circles), (1) white tail/ face/collar, (1) black set of legs/nose. Using the Honey the Bear die set, die cut the following pieces, all from brown cardstock; (1) shadow layer, (1) detail layer (retain the face piece), (1) snout, (1) set of feet. Ink the pieces with brown ink and a sponge dauber. Use a black pen to draw in the the eye details. From black, die cut a nose. (see image 2)

Add the finished sleeping Dutch the Fox and Honey the Bear to the green ovals on the pages, referring to the photos for placement. Draw grass around the Characters with green colored pencils. Trim the tree into five sets of branches and layer the branches over the sleeping Characters, referring to the photos for placement. Add the flowers to the branches and one to each Character's head.

Die cut (2) green and (2) yellow Oval Landscape Accordion pages. Use removable tape to secure the Flower Stage it Stencil over an accordion page and add white stencil paste through the holes onto the outer frame area using a palette knife to scrape off the excess and return it to the pot. Repeat with the other three pages. Set the pages aside to dry. Wash the stencil and knife with water. (see image 1)

4. Referring to the photos

set, die cut the top of the tree from woodgrain paper. Sponge brown ink on the branches to further highlight them. Use the triple flower die from the All Seasons Tree set on white cardstock four times to create 12 white flowers. Shape the flowers and add orange gems to the centers. (see image 3)

INSTRUCTIONS

Once the paste is dry, use 6mm Double-Sided tape on the two side tabs on the left green page and attach it to the right green page. Trim off the

5. Using the All Seasons Tree die

for placement, assemble both the sleeping Characters. For Dutch the Fox, use a sponge dauber to add orange ink around the edges. Also add the tail defining line with an orange colored pencil. Add the orange circles back into the eye holes and draw the sleeping eyes with a black pen.

Train the outer frames to fold as a valley fold and bring the two ovals to each other. Add a strong liquid glue to the side tab on the Fox page and attach it behind the Bear page, holding it until the glue sets. Trim off the small tab on the oval with the bear. Train the inner ovals to pivot with a mountain fold between them.

Write a personal greeting on the back of one or both ovals. If desired, a greeting can be written or stamped on the honey pot that comes included with Honey the Bear and tucked under his hands. Pop it Ups cardmaking | Winter 2016

adventure awaits

Hot Air Balloon Card by Shelly Hickox

The sky's the limit with the Hot Air Balloon die set. Style the balloon bold, colorful, vintage, soft, sparkly or pretty - whatever you dream up! Use the balloon for flat card fronts or animate it on the included two-tier pop-up die with clouds.

CARD DIMENSIONS closed: 4.25” X 5.5” (10.8 cm x 14 cm)

open: 4.25” x 11” (10.8 cm x 28 cm)

Shelly Hickox

http://shellyhickox.blogspot.com Hello! My name is Shelly Hickox and I live with my husband, chickens, and cats in the country, just south of Memphis. I’ve been a paper crafter for as long as I can remember, and was introduced to rubber stamping about 15 years ago. When I discovered Karen’s dies, a whole new world opened up for me! I love making interactive cards - they look so complicated, but Pop it Ups dies make creating them so easy. When I’m not making a mess in my stamp shack, I love gardening and photography.

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Pop it Ups™ by Karen Burniston for Elizabeth Craft Designs

DIE SETS

X 1106 Hot Air Balloon with pop-up X 1111 Trellis Wavy Frames X 778 Lots of Pops X 973 Tags Pivot Card

CLEAR STAMPS

X CS012 What’s Up?

Elizabeth Craft Designs CLEAR DOUBLE-SIDED ADHESIVE X 505 Tape, 3 mm

Wavy Frames die set, cut the following Cut a 4.25” x 11” (10.8 cm x 28 cm) pieces: (1) patterned rectangle; (1) piece of oatmeal cardstock and score aqua decorative-edged panel. in the center for folding. Cut two (see image 2) pieces of patterned cardstock to 4 1/8" x 5 3/8" (10.5 cm x 13.7 cm) and adhere the pieces inside the card, butting them together at the crease. Using the pop-up die included in the Hot Air Balloon set, place the alignment nubs over the fold of the card and die cut. Work the folds to create the two-tier pop-up platform.

5. Refer to the photos for placement

Other Supplies

X Oatmeal and Aqua cardstock X My Mind's Eye Up and Away patterned cardstock X Burlap and pearls X Coordinating ribbons & twines X Die cutting machine X Liquid Adhesive and pop dots X Acrylic block & black ink

INSTRUCTIONS

Using the Hot Air Balloon die set, cut the following pieces for inside the card: (1) patterned balloon base; (1) aqua detail layer; (1) glitter paper balloon basket; (1) burlap balloon basket; (1) glitter paper balloon trim; (3) patterned cardstock clouds. Using the Lots of Pops die set, cut the following pieces: (10) patterned banners. Also die cut a tag using the Tags Pivot Card set. Gather coordinating ribbons, twines and pearls. Stamp the sentiment on the tag with black ink. (see image 1)

Using the Hot Air Balloon die set, cut the following pieces for the front of the card: (1) patterned balloon base; (1) glitter paper detail layer; (1) aqua basket; (1) burlap trim. Using the Trellis

when creating the card's interior. Start by attaching the bunting to the inside of the card across the back wall. Add a piece of ribbon trim across the top edge. Adhere the assembled balloon to the upper popup platform. Adhere the three clouds to the lower pop-up platform using pop-dots for dimension. Add the tag to the bottom half of the card.

Assemble the bunting by folding the banners over a piece of twine and securing to themselves. Assemble the balloons by adding the detail layer over the solid layer. Next, add the basket by adhering the scalloped trim piece over the balloon and the two inner strings behind the balloon. Add the large scalloped trim piece across the balloon. For the interior Cut a panel of balloon, trim just the basket from patterned cardstock to 4 1/8" the burlap piece and glue it over the x 5.5" (10.5 cm x 14 cm) and score at glittered basket. Add decorative pearls. 1.5" (3.8 cm) from the top. Adhere the Assemble the front decoration by cardstock as a backing card, using the adhering the patterned rectangle to larger panel on the the aqua rectangle and then adding front of the card the hot air balloon with pop-dots. and the shorter Tie a piece of ribbon through the panel on the hole in the tag. (see image 3) back of the card. Work one half at a time and avoid the pop-up areas with adhesive. Add a patterned cardstock strip measuring 4 1/8" x 1.5" (10.5 cm x 3.8 cm) below the panel to complete the patterned background. Add the decorative balloon panel to the front of the card using pop-dots for dimension.

Pop it Ups cardmaking | Winter 2016

bonjour

Hanging Charm Pull Tab Card by Karen Burniston The Hanging Charm Pull Tab die set is a perfect choice for a simple hello. The included charm dies include an Eiffel Tower, a butterfly, a heart and a coffee cup. You'll find greetings to match the charms in coordinating clear stamp sets.

CARD DIMENSIONS 5.5â&#x20AC;? X 6.5â&#x20AC;?

(14 cm x 16.5 cm)

Karen Burniston

http://karenburniston.com Hi, I'm Karen Burniston from Katy, Texas, where I live with my fellow-engineer husband, John, and our teenage twins. We have two incorrigible pug-beagle mixes (Puggles) who we jokingly attempt to send home with anyone who visits. I enjoy product design, papercrafting, puzzle-based apps and teaching. I don't enjoy cleaning! Pop it Ups dies are my way of recruiting more folks to the fun world of interactive cards. They're fun to make, fun to give and fun to receive . . . a little bit of magic in a card!

Pop it Ups cardmaking | Winter 2016

YOU WILL NEED

Using the Hanging Charm Pull Tab die set, cut the following pieces: (1) for Elizabeth Craft Designs dark rose card base; (1) pink pull tab; DIE SETS (2) frames cut into the adhesive side X 1104 Hanging Charm Pull Tab of the white and black cardstock; and X 978 Eiffel Tower Pop Stand (2) silver Eiffel Tower charms (use X 979 Paris Edges the metal adaptor plate). Stamp the X 974 Rectangle Pull Card (arrow) charms with the Eiffel Tower stamp in CLEAR STAMPS black Staz-on ink. Cut a 4.5" x 4" (11.4 cm X CS011 Just a Note x 10.2 cm) piece of dark rose cardstock STAGE IT STENCILS X S006 Swirly Flourish and cut the left edge with the lace die and the right edge with the postal die Elizabeth Craft Designs using the Paris Edges die set. Use the small arrow die from the Rectangle Pull CARDSTOCK X PSF102 White 100lb Soft Finish Card die set to cut an arrow at the top CLEAR DOUBLE-SIDED ADHESIVE of the pull tab. Stamp the "just a note X 508 Tape, 64 mm to say" sentiment on white cardstock X 506 Tape, 6 mm and trim into a banner shape. PEEL-OFF STICKERS (see image 1)

Pop it Upsâ&#x201E;˘ by Karen Burniston

Add the white frame, adhesiveside-up, over the black frame. Peel up the liner on the white frame and cover with Vintage Pink glitter. Polish the glitter well with your fingers. Add adhesive to the front of the "mountain" card base and attach the finished frame to it.

Cut a 5.25" x 6.25" (13.3 cm x 15.9 cm) piece of Soft Finish Cardstock. Spray black ink over the Swirly Flourish stencil onto a paper towel to catch the ink spraying through the holes. Press the cardstock face down onto the wet stencil to transfer the negative version of the stencil to the cardstock. (see image 3)

X 7010 Black/Silver Glitter Lines

SILK MICROFINE GLITTER X 617 Vintage Pink

SHIMMER SHEETZ

X SS0211 Silver Metallic

TOOLS

X 803 Metal Adaptor Plate

Other Supplies

X Dark Rose, Black and Pink cardstocks X Black spray ink X Metal Jump Ring X Coordinating ribbon X Die cutting machine with embossing sandwich X Liquid Adhesive X Clear fishing line X Staz-on black ink X Pink ink and blending tool X Acrylic block and black ink X White embossing powder and heat gun

6. Use pink ink and a blending tool to 3.

Assemble the Card Base/Pull Tab combo using 6mm tape and following the package or video instructions. Adhere the card base to the edged piece. Pull the card open, stamp "Bonjour" and emboss with white powder. Adhere the two tower charms back-to-back and add a jump ring through the hole. Peel up the liner on the black frame INSTRUCTIONS and hang the charm with fishing Cut a 2.5" x 3.25" (6.4 cm x 8.3 line through the ring and press the cm) piece of Soft Finish Cardstock ends into the adhesive. (see image 2) and back with 64mm Double-Sided Adhesive tape. Create the same size piece with black cardstock. Cut a 2.5" x 5" (6.4 cm x 12.7 cm) piece of silver Shimmer Sheetz and back with 64mm tape. Using the metal adaptor plate and the Eiffel Tower Pop Stand die, die cut a silver tower, leave it in the die, switch to an embossing sandwich and emboss. Remove from the die and brush the top with black Staz-on ink.

tint the white cardstock pink. Cut an 11" x 6.5" (28 cm x 16.5 cm) piece of dark rose cardstock and score in the center to create a side fold card. Attach the background piece to the front of the card.

Refer to the photos for placement when adding the completed Hanging Charm Pull Tab and greeting banner. Add black glitter lines across the large tower at the three decks. Die cut a black tower and attach the silver one to it for dimension. Tie a piece of sheer pink ribbon through the tower and tie in a bow. Attach the completed tower to the front of the card. Pop it Ups cardmaking | Winter 2016