Concrete Pave Stones
ADA Compliant Paver
IMPROVING YOUR LANDSCAPE™
ADA Compliant Paver The ADA Compliant Paver is an additional guidance provision for wheelchair and pedestrian access to streets, sidewalks and other components of the public right of way. This product will help ensure local jurisdictions and other entities that their facilities are accessible to people with physical or sensory disabilities. Available in a variety of colors, the ADA Compliant Paver provides visual as well as textural contrast to conventional publicly utilized pavements. COMPOSITION AND MANUFACTURE The ADA Compliant Paver is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations, the ADA Compliant Paver has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936 and freeze-thaw testing per Section 8 of ASTM C-67. INSTALLATION 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which is to receive the pave stones. Backfill, place and level the excavated area with a 4 inch minimum of a structural base material or as otherwise directed by Site Engineer/Architect/Landscape Architect. Engineering may be required. 2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-1/2 in. (25-38mm) screeded to the grade and profile required. 3. Install the ADA Compliant Paver with joints approximately 1/8 in. (3mm). 4. Where required, cut pave stones with an approved cutting device to fit accurately, neatly and without damaged edges. 5. Tamp pave stones with a plate compactor, uniformly level, true to grade and free of movement. 6. Spread sand to 1/8 in. thickness over entire paving area. 7. Make one more pass with plate compactor to fill joints with sand. Complete installation & specification details are available by contacting your Pavestone Company Sales Representative. Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color preferencs and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, paves stones must be installed from several cubes at a time. Effloresence, a whitish, powder-like deposit, may appear on concrete pave stones. This is a natural occurrence in any concrete product and will usually wear off over time.
Pavers Sand
1.6-2.4 41-61
1.6-2.4
0.65
41-61
17
(b) plan
The ADA Compliant Paver Top View top diameter of 50%-65% of the base diameter 0.2
base diameter of 0.9-1.4 (23-36mm)
5.1
(a) elevation (enlarged)
The ADA Compliant Paver Truncated Dome Cross Section
Figure 705.1 Size and Spacing of Truncated Domes
• • • • • • • • • •
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Cartersville, GA: Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:
Member of ASLA & NCMA
(770) (512) (508) (770) (704) (513) (719) (817) (303) (240)
306-9691 558-7283 947-6001 607-3345 588-4747 474-3783 322-0101 481-5802 287-3700 420-3780
ICPI Charter Member
• • • • • •
Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Sacramento/ Winters, CA: • St. Louis/ Cape Girardeau, MO:
(281) (816) (702) (985) (602)
391-7283 524-9900 221-2700 882-9111 257-4588
(530) 795-4400 (573) 332-8312
Retaining Wall Systems
SKU# CM 066v6 01/07
705.1.3 Contrast. Detectable warning surfaces shall contrast visually with adjacent walking surfaces either light-on-dark, or dark-on-light.
Base
© 2007 by Pavestone Company. All Rights Reserved. , Improving Your Landscape™ are trademarks of the Pavestone Company.
*Fractional dimensions are nominal.
705.1.2 Dome Spacing. Truncated domes in a detactable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch (17 mm) minimum, measured between the most adjacent domes on a square grid.
Sand-Filled Joints
w w w. p a v e s t o n e . c o m
PRODUCT INFORMATION The ADA Compliant Paver is available in 1 size and 1 thickness, 60mm = 2 3/8” ADA Paver Nominal Dimensions 3 7/8” W x 7 13/16" L 98mm x 198mm Height/Thickness: 60mm = 2 3/8” Wt./Stone: 6.125 lbs. Stones/Sq.Ft: 4.66 480 Stones/Pallet: Approx. Wt./Pallet : 2,884 lbs. Sq.Ft./Pallet: 103 Product Number: 200
705.1.1 Dome Size. Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum to 65 percent of the base diameter maximum, and a height of 0.2 inch (5.1 mm).
Typical Cross Section Of Concrete Paver Installation
The Strength of a National Company With Local Customer Service
APPLICATIONS Transportation Centers • Street Intersections Hazardous Vehicle Areas • Pedestrian Ramps