Concrete Pave Stones
Uni Eco-Stone
®
IMPROVING YOUR LANDSCAPE ™
Uni Eco-Stone
®
The unique, patented design of Uni Eco-Stone® features funnel-like openings in the pavement surface which facilitate rainwater infiltration, thereby reducing stormwater runoff and maximizing groundwater recharge and/or storage. With concern for the environment and the earth's resources at an all-time high, the Uni Eco-Stone® permeable paving system offers governing agencies, engineers, and architects an alternative to traditional non-permeable pavements – and is a potential Best Management Practice for EPA compliance requirements. COMPOSITION AND MANUFACTURE Uni Eco-Stone® is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations, Uni Eco-Stone® has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936.
APPLICATIONS Parking Lots • Driveways • Patios • Rest Areas • Bridge Underpasses • Entrance Areas • Sidewalks • Terraces • Pool Decks • Beach Promenades • Pedestrian Malls • Street Medians PRODUCT INFORMATION
INSTALLATION
Uni Eco-Stone® Nominal Dimensions 4 1/2" W x 9" L 115mm x 230mm Height/Thickness 3 1/8" = 80mm Wt./Stone 10 lbs. Stones/Sq. Ft. 3.55 Stones/Pallet 280 Approx. Wt./Pallet 2,808 lbs. Sq. Ft./Pallet 78 Product Number 608
1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level specified base material as directed by Site Engineer/Architect/Landscape Architect. 2. Place bedding course of specified free draining bedding material 1-2 in. (25-50mm) screeded to the grade and profile required. 3. Install Uni Eco-Stone® with joints approximately 1/8 in. (3mm) in width. 4. Where required, cut pavers with an approved cutting device to fit accurately, neatly and without damaged edges. 5. Tamp pavers with a plate compactor, uniformly level, true to grade to grade and free of movement. 6. Spread specified free draining material to 1/8 in. thickness over entire paving area. Stabilization of jointing sand may be required. 7. Make one more pass with plate compactor to fill joints with sand.
Note: Product not available in all markets. Fractional dimensions are nominal.
INSTALLATION PATTERN
Complete installation & specification details are available by contacting your Pavestone Company Sales Representative.
Typical Cross Section Of Concrete Paver Installation Sand-Filled Joints Pavers
Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color differences and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, pavers must be installed from several cubes at a time. Efflorescence, a whitish, powder-like deposit, may appear on concrete pavers. This is a natural occurrence in any concrete product and will usually wear off over time.
© 2007 by Pavestone Company. All Rights Reserved. , Improving Your Landscape™ are trademarks of the Pavestone Company. Uni Eco-Stone® (U.S. Patent #4,834,575) is a registered trademark of, and manufactured under license from, F. von Langsdorff Lic. Ltd., Mississauga, Ontario, Canada.
Base
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Cartersville, GA Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:
Member of ASLA and NCMA
(770) (512) (508) (770) (704) (513) (719) (817) (303) (240)
306-9691 558-7283 947-6001 607-3345 588-4747 474-3783 322-0101 481-5802 287-3700 420-3780
ICPI Charter Member
• • • • • •
Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Sacramento/ Winters, CA: • St. Louis/ Cape Girardeau, MO:
(281) (816) (702) (985) (602)
391-7283 524-9900 221-2700 882-9111 257-4588
(530) 795-4400 (573) 332-8312
Retaining Wall Systems
SKU# CM 055v2 12/06
w w w. p a v e s t o n e . c o m
• • • • • • • • • •
Sand