Segmental Retaining Walls
FrogStone
™
IMPROVING YOUR LANDSCAPE ™
FrogStone
™
Designed for beauty, FrogStone™ units are textured with a random split face resembling weathered rock. Unit shapes and sizes are balanced to provide a natural profile which compliments any design or construction. FrogStone™ is the perfect choice for architects, designers and landscapers who want to match their retaining walls to the textures and colors of a projects natural surroundings.
COMPOSITION AND MANUFACTURE
APPLICATIONS
FrogStone™ is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations.
Terraced Gardens • Landscape Retaining Walls Geosynthetic Reinforced Tall Walls • Erosion Control
INSTALLATION FOR REINFORCED WALLS
PRODUCT INFORMATION
1. Excavate Dig a base trench 24 inches to 36 inches wide and a minimum of 12 inches deep. Remove all vegetation and unsuitable organic soils. ( Do not use these for structural backfill. ) Compact soil base properly. 2. Prepare Leveling Pad Fill trench 6 inches of well graded aggregate and compact firmly with vibrating compaction equipment. 3. Level the Base Level the aggregate base from front to back and side to side. This procedure will ensure a straight and stable wall. 4. Laying Your First Course Use a string line to align the first row of units. For smooth curves, use a flexpipe as the guide. Place each unit edge to edge, lining up the back of the units
Frogstone Five Way 16" L x 12 "W x 6" H* Wt./Stone: 49 lbs. Stones/Pallet: 40 Approx. Wt./Pallet: 2,460 lbs. Face Ft./Pallet: 26 Product Number: 847
Frogstone Straight Face 16" L x 12 "W x 6" H* Wt./Stone: 49 lbs. Stones/Pallet: 40 Approx. Wt./Pallet: 2,460 lbs. Face Ft./Pallet: 26 Product Number: 848
Frogstone Corner 16" L x 8" W x 6" H* Wt./Stone: Stones/Pallet: Approx. Wt./Pallet: Product Number:
Pavestone Cap #819 18 L x 13 1/2 W x 3" H Wt./Stone 34 lbs. Stones/Pallet 48 Approx. Wt./Pallet 3,060 lbs. Linear ft./Pallet 72 Product Number 819
5. Build Your Wall Sweep the top of each course of units to clear debris. Half-stagger the next course so each unit is centered on two units below. Pull each unit forward to lock connecting lugs in place. 6. Install Backfill Place perforated drainage pipe behind the base of the wall. Add 12 inches of free-draining aggregate behind the wall. Fill the hollow core of the units with the same materials. Place the backfill materials in layers of no more than 12 inches deep. Compact each layer well, making sure to keep the compaction equipment 12 inches away from the back of the wall. 7. Reinforce Walls Place the geosynthetic according to the engineer's plan drawings and specifications. Place the geosynthetic on top and as close to the front of the units as possible. Lock the next course of units into place. Gently tension the geosynthetics toward the back of the compacted backfill. Repeat the backfilling steps. Always work from the back of the wall toward the end of the reinforced zone.
46 lbs. 64 2,978 lbs. 828C
Caps not available in all markets. * Fractional dimensions are nominal.
8. Cap Your Wall Sweep off the top course of units. Secure caps to the top of the wall using an approved concrete adhesive. Use a level piece of string to properly align the capping. Place filter soil seperation fabric on top of the backfill and drainage materials as well as the back side of the wall. Cover with top soil.
Typical Geosynthetic Reinforced Cross Section
Installation Illustrations Steps 1-8 STEP 1 Excavate
STEP 2
Preparing Level Pad
STEP 4
STEP 3
Level the Base
Lay your First Course
Typical Gravity Cross Section
STEP 5 Build your Wall
STEP 6
Install Backfill
STEP 8
STEP 7
Reinforce Wall
Cap your Wall
w w w. p a v e s t o n e . c o m © 2007 by Pavestone Co. All Rights Reserved. and Improving Your Landscape™, are trademarks of the Pavestone Co. Frogstone™ trademark and CornerStone® is a registered trademark of CornerStone Wall Solutions, Inc. Patents Pending.
• • • • • • • • •
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Cartersville, GA: Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO:
Member of ASLA and NCMA
(770) (512) (508) (770) (704) (513) (719) (817) (303)
306-9691 558-7283 947-6001 607-3345 588-4747 474-3783 322-0101 481-5802 287-3700
ICPI Charter Member
• • • • • • • •
Hagerstown, MD: Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Winters, CA: St. Louis/ Cape Girardeau, MO:
(240) (281) (816) (702) (985) (602) (530)
420-3780 391-7283 524-9900 221-2700 882-9111 257-4588 795-4400
(573) 332-8312
CornerStone® Wall Solutions
SKU# CDC 244 11/07
Complete installation & specification details are available by contacting your Pavestone Sales Representative. Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color differences and variables in print reproduction, colors may not match exactly.