42
ACCESSORIES & TOOLS Paver Lights
T he paver light sheds new light on landscape design. Create ambiance, provide safety and enhance Accessories & Tools
your landscape with these low maintenance, easy-to-install paver lights.
Specification and Pallet Information 2 Pack Unit Dimensions: 4"W x 8"L x 23/8 "H 1.2V Batteries 1300 mAH, NiMH Dual Solar Panels Dual White LED Lights Product Number: 45581 No wiring needed
DAY
Crosswalks
pavestone.com
Driveways
Fountains
APPLICATIONS Medians Patios Plazas Pool Decks Roadways Showroom Floors Valet Ports Walkways
Stairways
COLOR SHOWN MAY NOT BE AVAILABLE IN THIS MARKET
Shopping Malls
Paver Lights
For use with low voltage outdoor landscape lighting systems only. Not for use with submersible or pool/spa equipment. Not to be installed within 10 ft. of a pool.
43
Step 1 Attach low voltage cable to terminals on power pack, tighten screws firmly. Note: Terminals can either be found on the Rear or the Bottom of the Transformer.
Step 2 Hang power pack and plug into a DFCI outdoor electrical outlet that contains a weather-resistant cover. Correct Transformer=Number of Lights on the System x Wattage of the lamp being used=Minimum Required Transformer Next: Turn power pack "ON" (Do Not Use Extension Cord.) Note: First fixture must be installed at least 10 ft. from power pack. Wiring: Wiring to connect the power unit to the luminaries shall be listed SPT-3, underground low energy circuit cable. Ordering wire: Make sure that all wiring is listed SPT-3, underground low energy circuit cable.
Step 3 Route cable to desired fixture locations. Be careful to leave plenty of slack in the cable to allow for ease in connecting the fixture. (It is recommended to make a loop in the wire at any desired fixture location). Next: After entire installation is completed and full lighting effect is achieved, hide cable as desired. Note: When installing with pave stones, wire should be run beneath the pave stones in sand.
Step 4 (Light Box Assembly) Snap light socket into base of casing and twist 1⁄4 turn clockwise to lock in place. Remove protective backing from lens and place lens on casing. Attach trim and secure with trim screws.
Specification and Pallet Information Plaza - Large Rectangle Size Dimensions:7 7/8"L x 315/16"W x 23/8"H 12 volt outdoor low voltage fixture Includes: • fixture with lens • 4-watt bulb • solderless connectors, • hold-down tabs
Dimensions: 83/4"L x 53/4"W x 23/8"H
Step 5 Attach fixtures to cable with wire connectors, by placing two or three wires together. In a (clockwisemotion), twist the wire nut on to the adjacent wires and proceed to the next fixture. Next: Simply lay the attached fixture into the ground at desired level. Note: When installing with pave stones, fixtures should be installed at grade level.
12 volt outdoor low voltage fixture Includes: • fixture with lens • two 4-watt bulb • solderless connectors • hold-down tabs
COLOR SHOWN MAY NOT BE AVAILABLE IN THIS MARKET
pavestone.com
44
ACCESSORIES & TOOLS A ccessories
Set and seal your beautiful paved landscape for years to come.
Accessories & Tools
Professional products create a long lasting beauty with ease.
Before
Specification and Pallet Information 24 Piece Unit Dimensions: 8’L x 2”H x 3”D For use with pavers 2" - 31/8" thick Use with 8” or 10” non-galvanized spikes
Complete Line of Techni-Seal Products
After Sealing pavestone.com