Concrete Pave Stones
Roman Cobble
™
IMPROVING YOUR LANDSCAPE ™
Roman Cobble
™
This unique shape lends itself to creative serpentine designs and distinguishing curves. As a result of its larger size, Roman Cobble™ is best suited for pedestrian traffic. Available in a standard finish and a variety of colors, the Roman Cobble™ will coordinate with almost any commercial or residential landscape.
APPLICATIONS
COMPOSITION AND MANUFACTURE Roman Cobble is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations, Roman Cobble™ has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936 and freeze-thaw testing per Section 8 of ASTM C-67. ™
Sidewalks • Garden Pathways • Patios • Terraces • Pool Decks Driveways • Pedestrian Malls • Parking Lots • Gas Stations Highway Ramps • Highway Rest Areas • Bridge Underpasses Entrance Areas • Beach Promenades • Roof Gardens • General Road Construction
PRODUCT INFORMATION Roman Cobble™ is available in a Height/Thickness of 2 3/8 inches* = 60mm. Quantity/sq. ft. is approximately 2.6 stones.
INSTALLATION 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with dense graded aggregate suitable for base material (typically 4-6 in. of compacted base for light vehicular and pedestrian traffic) or as otherwise directed by Site Engineer/Architect/Landscape Architect. 2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2 in. (25-38mm) screeded to the grade and profile required. 3. Install Roman Cobble™ with joints approximately 1/8 in. (3mm). 4. Where required, cut pave stones with an approved cutting device to fit accurately, neatly and without damaged edges. 5. Tamp pave stones with a plate compactor, uniformly level, true to grade and free of movement. 6. Spread sand to 1/8 inch thickness over entire paving area. 7. Make one more pass with plate compactor to fill joints with sand. Complete installation & specification details are available by contacting your Pavestone Sales Representative.
Roman Cobble™ Nominal Dimensions 8 1/16 L x 7 1/4 W x 2 3/8" H* 204mm x 184mm x 60mm Wt./Stone 10.9 lbs. Stones/Pallet 240 Approx. Wt./Pallet 2,604 lbs. Sq. Ft./Pallet 93 Product Number 306 *Fractional dimensions are nominal.
INSTALLATION PATTERNS
Fan Fan patterns require excessive cutting.
Serpentine and Runner Bond
Typical Cross Section Of Concrete Pave Stone Installation Sand-Filled Joints
Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color preferences and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, pave stones must be installed from several cubes at a time. Efflorescence, a whitish, powderlike deposit, may appear on concrete pave stones. This is a natural occurrence in any concrete product and will usually wear off over time.
© 2005 by Pavestone Company. All Rights Reserved. and Roman Cobble™ are trademarks of the Pavestone Company.
, Improving Your Landscape™
Sand Base
• • • • • • • • •
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:
Member of ASLA and NCMA
(770) (512) (508) (704) (513) (719) (817) (303) (240)
306-9691 558-7283 947-6001 588-4747 474-3783 322-0101 481-5802 287-3700 420-3780
ICPI Charter Member
• Houston, TX: • Kansas City, MO: • Las Vegas, NV: • New Orleans, LA: • Phoenix, AZ: • Sacramento, CA: • St. Louis/ Cape Girardeau, MO: • Winters, CA:
(281) (816) (702) (985) (602) (916)
391-7283 524-9900 221-2700 882-9111 257-4588 452-5233
(573) 332-8312 (530) 795-4400
Retaining Wall Systems
SKU # CM 153v2 1/05
w w w. p a v e s t o n e . c o m
Pave Stones