NO BULL
NEWS ISSUE #1, 2015
PEDDERS TRADE TECHNICAL BULLETIN
www.pedders.com.au
PEDDERS SUSPENSION LIFT KITS THE LATEST IN PEDDERS KITS RAISING YOUR SUV OR 4WD
Pedders
PEDDERS SUSPENSION LIFT KITS TrakRyder 4WD Suspension represents many years of technical development and delivers new levels of ride and comfort for the 4-wheel drive owner.
Pedders
day driving, lift kits or towing and load carrying, you can be rest assured that your local Pedders Suspension specialist can tailor a TrakRyder suspension system to suit your driving needs. A suspension lift kit raises the entire suspension system, which allows 4WD owners to install much larger tyres and to safely take the four wheel drive off road and into rougher terrains. Unlike other types of lift kits, suspension lift kits actually suspend the entire frame (with all the major parts including the engine and powertrain) to increase the distance between the chassis and the axles. Pedders Suspension lift kits raise the entire suspension by changing the front and rear springs, also fitted are tuned longer travel shock absorbers to accommodate the increase in suspension travel.
“
WITH TRAKRYDER IT IS POSSIBLE TO ENJOY ALL THE ASPIRATIONAL TOUGH QUALITIES OF A 4-WHEEL DRIVE ESCAPE VEHICLE AND RIDE CHARACTERISTICS OF A SEDAN.
“
Pedders TrakRyder suspension includes hundreds of quality components in its construction each designed to improve the ride and handling of specific vehicles in specific ways. The success of the Pedders TrakRyder 4WD suspension system is not governed by product alone. TrakRyder is a tailored system and much of its prowess can be attributed to the fact that the system can be ‘custom built’ to suit any 4x4 vehicle. With TrakRyder it is possible to enjoy all the aspirational tough qualities of a 4-wheel drive escape vehicle yet with the handling and ride characteristics of a sedan. For owners of newer vehicles, TrakRyder brings an end to the age-old compromise of owning a 4-wheel drive and having to compromise on ride and comfort. Whether it be for every
The Pedders Lift kits are available in a kit form or you may purchase the components separately. Simply fit the parts, have the vehicle wheel aligned and you’re ready to go! The 9500 series foam cell eliminates shock fade. Extra-large 40mm bore and piston is much greater than original equipment size and provides an even larger increased oil capacity for greater ride improvement. The TrakRyder raised heavy duty springs are made from premium quality grade steel, are stress relieved and are manufactured to exacting standards. All sway bar links, alignment products, extended brake hoses plus assorted chassis parts have all been designed, produced and tested off road to enhance the off road experience.
Upgrade Solutions
GVM
THE WEIGHT IS OVER! PEDDERS VEHICLE UPGRADE SOLUTIONS: NATIONALLY CERTIFIED GVM UPGRADE KITS MAXIMISED PAYLOAD/MINIMISE RISK IMPROVED DRIVABILITY AND SAFETY UP TO 720KG PAYLOAD INCREASE
.
OVT G L A
D E V RO
ER
FED
APP
REGULATORY, INSURANCE & O.H.+S. COMPLIANT
THE LARGEST RANGE AUSTRALIA wIDE • Ford Ranger • Toyota HiAce • Volkswagen Amarok • Nissan Navara
• Holden Colorado • Isuzu D-Max • Toyota Hilux/Landcruiser • Mazda BT50
4x4
COMMERCIAL
TOWING
Pedders
THE LATEST IN PEDDERS KITS! Kits for coil sprung vehicles
Kits for leaf sprung vehicles
Kits for a combination of coil and leaf
Pedders
PUSH IT TO THE LIMITS Whether for towing, load carrying or just a bit of weekend fun in the bush, Pedders TrakRyder 4x4 suspension kits are specifically designed for Australia’s rugged and unique conditions. Trusted by Australians for over 65 years and backed by over 120 outlets Australia wide, Pedders are the brake, steering and suspension specialists. Find your local Pedders expert at pedders.com.au
Pedders
RAISING YOUR SUV OR 4WD WHEN RAISING YOUR SUV OR 4WD THERE ARE CONSIDERATIONS TO BE AWARE OF, SUCH AS: Raising the Centre of Gravity Wheel Alignment geometry angles Drive shaft angles Angle of the shackles Braking effect on the vehicle
Pedders
RAISING THE CENTRE OF GRAVITY
WHEEL ALIGNMENT GEOMETRY ANGLES
When the vehicle is raised, the centre of gravity raises as well. When a roof rack is fitted and equipment is placed in it, this also causes the centre of gravity to raise. Owners must be aware of this, as it will alter the handling characteristics of the vehicle. It is important when raising your 4 W.D., to fit good quality suspension components, to maintain stability and driveability.
If it is a live axle vehicle and the vehicle has been raised, then there is a general tendency for the caster angle to diminish. This will impact on the straight line stability of the vehicle. If the vehicle is equipped with an I.F.S., the Camber angle may well be compromised and the effect of this, will be uneven wearing tyres. It is very important to have a wheel alignment when the height has been altered.
BRAKING EFFECT ON THE VEHICLE
The vehicle’s braking distance will be affected as the weight increases. You raise your vehicle for a reason, and the most common reason is, so you can traverse rougher terrain, so therefore one could assume that you are going on a road trip. This means that you will load the vehicle with all the required equipment, thus increasing the gross weight of the vehicle. When this happens, it would be a good idea to have the brakes of the vehicle inspected, serviced, repaired and/or upgraded. Pedders have a large range of Geomet coated Disc Rotors which is complemented with Ceramic technology inspired Brake Pads.
DRIVE SHAFT ANGLES
ANGLE OF THE SHACKLES
It is important the drive shaft angles are “In Faze”, if they are not, then a drive line vibration could occur. Because of the design of a “Hookes Joint”, the rotational speed alters and the greater the angle, the greater the speed difference. That is why the front and rear angles must be same.
The reason shackles are fitted to leaf springs, is to allow for the varying length of the spring when operating through it’s normal cycle of bump and rebound. When correct raised leaf springs have been fitted, the correct angle will be achieved.
Pedders
NEW PRODUCTS
NOW IN STOCK WHEEL ALIGNMENT
Pedders Camber Pins (Pairs)
Pedders Camber Pins (Packs of 10 Pairs)
Part #
Description
Part #
Description
458012
12mm
458012/10
12mm
458014
14mm
458014/10
14mm
458015
15mm
458017/10
17mm
458016
16mm
458017
17mm
Pedders now has available a series of different diameter camber pins that are suitable for various makes and models. Our latest range of camber pins are available in paired lots with many choices of available sizes such as: 12mm, 14mm, 15mm, 16mm and 17mm. For regular users of camber pins we also offer them in bulk packs of 10 pairs for the 12mm, 14mm and 17mm pins. Pedders Camber Pins offer the following key features and benefits: • Affordable - High quality steel, direct replacement for original parts. • Designed for ease of installation. • Allow for quick replacement and easy alignment. • Restores alignment geometry faster. • Enables ease of camber adjustment. • 2 Year/40,000km nationwide warranty. 458012
458015
458016
458014
458017
Bulk pack of 10 pairs All photos used are for illustrative purpose only. For further information please contact your local Pedders Suspension specialist or check out www.pedders.com.au Note: See our Pedders Suspension catalogue for up to date information.
Pedders