Water Coolers & Bottle Fillers
Murdock Manufacturing
has been using innovative spirit and engineering know-how to manufacture industry leading plumbing products for over 160 years. Murdock’s water coolers and bottle fillers offer convenience to maintenance staff and encourage eco-friendly practices among users.
Maintenance Advantage Water Coolers Features and Benefits •
Single front access push button allows for simple two-minute maintenance without the need for wire tempering or deck removal.
•
Integral mechanical stop allows for water flow even during natural disasters where sensor-operated & electrical water coolers might fail.
•
Cartridges can be replaced through the push button without removing the basin or lower wrapper.
•
Patent pending AutoStop eliminates unnecessary labor by shutting off water to the valve when strainer cap is removed.
•
AutoStop strainer features an easy-to-clean screen that will capture any debris in the water supply line.
•
Single access point regulates water cooler operation, flow control and stream height adjustment.
•
Universal bi-level mounting system—you choose which side to install the high fountain on—no additional parts required!
•
Single ADA coolers are 13 lbs. lighter than standard coolers; bi-level coolers are 16 lbs. lighter.
• Simplified bi-level drain assembly for easier installation. •
Industry-leading .3 gpm water saving bubbler.
•
Antimicrobial push button & bubbler.
MC71 - single station
MC74UBL-MCBF2S stainless steel bi-level water cooler with bottle filler
www.MURDOCKMFG.com
GREEN STATEMENT The Green cUPC logo is a registered trademark of IAPMO. Products with the Green cUPC logo meet the most up-to-date standards for green building and water efficiency.
Bottle FillerS Cooler Mounted •
Hands-free 9-volt sensor or push button operation. Optional bottle counter display available.
•
Available in granite powder coated galvanized steel or stainless steel.
•
1gpm fill rate with laminar flow water supply eliminates splash.
•
Standard 115v connection or battery pack. Removable top for easy battery replacement.
•
100% Lead and Brass Free.
•
When installed properly, bottle fillers comply with ADA forward reach requirements.
•
Works with MC71 and MC72 series water coolers.
MCBF2-BCD - powder coated bottle filler with bottle filler display
Wall Mounted
MCBFS4 - stainless steel outdoor bottle filler
•
Semi-recessed push button bottle filler can be mounted in a 4” or larger wall space for simple installation virtually anywhere.
•
Housing has a slim and trim look that blends into any environment.
•
Fabricated of 18 gage type 304 stainless steel polished to a satin finish.
•
1 GPM fill rate with laminar flow water supply eliminates splash.
•
100% Lead and Brass Free.
•
Vandal and ligature-resistant design meets ADA forward and side reach requirements.
MORRIS GROUP INTERNATIONAL ACORN ENGINEERING Murdock MANUFACTURING Drinking Fountains, Hydrants, Pre-engineered Modular Buildings, Restroom Fixtures and Accessories P.O. Box 3527 City of Industry, CA 91744-0527 U.S.A. Tel 800-45-DRINK • 626-333-2543 Fax 626-855-4860 www.murdockmfg.com
Engineered Plumbing Products P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A. 800-488-8999 • 626-336-4561 • Fax 626-961-2200 www.acorneng.com
ACORN-GENCON PLASTICS, LLC Injection Molded Products 13818 Oaks Avenue • Chino, CA 91710 U.S.A. Tel 909-591-8461 • Fax 909-628-7465 www.acorn-gencon.com
AcornVac, Inc. Vacuum Plumbing Systems 13818 Oaks Avenue, Chino, CA 91710 Tel. 800-591-9920 • Tel. 909-902-1141 • Fax: 909-902-5041 www.acornvac.com
CHRONOMITE LABORATORIES, INC. Tankless Electric Water Heaters P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A. Tel 800-447-4962 • Fax 626-937-4279 www.chronomite.com
ELMCO GROUP
“What sets us apart from competitors is our engineering and spirit. We have a ‘can-do’ spirit. If you ask us to do something, we will do it or figure out how to do it. That’s the part our customers like, that’s the part we like.”
Manufacturer Representatives P.O. Box 3787, City of Industry, CA 91744 Tel 626-333-9942 • Fax 626-961-3813 www.morrisgroup.co
Jay R. Smith Mfg. Co.® Plumbing and Drainage Products P.O. Box 3237 • Montgomery, AL 36109-0237 Tel 800-467-6484 • 334-277-8520 • Fax 334-272-7396 www.jrsmith.com
Morris Industries Mexico, S. de R.L. de C.V. - Don Morris, President and CEO
Central and Latin America Manufacturing and Sales Maquiladoras #1387-1 Col.Cd. Industrial Tijuana, B.C., C.P. 22444 Tel 011-52-664-623-4580 • Fax 011-52-664-623-4590 www.morrisgroup.co
Morris Property Management Company Construction, Interior Design, Landscaping and Maintenance 15058 Proctor Avenue • City of Industry, CA 91746 Tel 626-855-4888 • Fax 626-855-4864 www.morrispropertiesmgt.com
POTTER ROEMER Fire Protection Equipment P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A. Tel 800-366-3473 • Fax 626-937-4777 www.potterroemer.com
WHITEHALL MANUFACTURING
L1001301MM-1502
Hospital and Therapy Products P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A. Tel 800-782-7706 • 626-968-6681 • Fax 626-855-4862 www.whitehallmfg.com