3D Concept Form
using polygon: Star Numside :5 Fillet Corners Fillet Radius:
1,5 Solid: Extrude Planar Curve Straight pull up 10 cm and its becomes a solid Twist done
Pavillion Design
這個練習主要是嘗試利用模矩化的單元材料構成一個pavillion。透過切割60乘以60公分的 木板，經過切割形成可以互相卡接的縫隙之後再行加熱，使木板彎曲成特定角度，最後可
以形成一個拱狀的暫時性停留空間。
cut a wooden board of 60*60cm 60.00 1 cut slits
Fabrication of the Pavillion
3 cut a wooden board of 60*60cm 60.00 1 2 heat the board for bending 500.00 458.55 cut 4 slits for tenon and mortise clip it toghether 4 3 of 60*60cm 2 heat the board for bending 500.00 458.55 cut 4 slits for tenon and mortise clip it toghether 4 3 heat the board for bending 500.00 458.55 mortise clip toghether 4 1 1 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 Step. 1 Step. 2 Step. 3 Step. 4 cut a wooden board of 60 x60 cm cut 4 slits for tenon and mortise later heat the board for bending clip it one by one togheter 3 cut a wooden board of 60*60cm 60.00 1 2 heat the board for bending 500.00 458.55 cut 4 slits for tenon and mortise clip it toghether 4 clip it one on another till it’s a 10pieces times 10 pieces square. and the it becomes an arch after tenon and mortise all the pieces togheter.
Design Rendering