SPECIALIST IN FIRE SAFETY PRODUCTS
PRODUCT GUIDE
1.0KG MEGAFIRE ABE RATING 1A:20B:E
SPECIALIST IN FIRE SAFETY PRODUCTS
PIRTEK ITEM CODE:
ME11ABE
NOZZLE SIZE:
3.6MM
AGENT CAPACITY:
1.0KG
NET MASS:
1.0KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
1.8KG
WORKING PRESSURE:
1000KPA AT 23°C
WITDH:
90MM
TEST PRESSURE:
2.5MPA
HEIGHT:
265MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
25668-DC-6321
VALVE FINISH:
NICKEL PLATED BRASS
DISCHARGE TIME:
8 SECONDS
HANDLE FINISH:
METAL RED FINISH
MegaFire’s compact 1.0KG extinguisher specifically is the perfect compromise between size and power to have around for that emergency fire. Megafire’s ABE dry powder extinguisher is suitable for most fire hazards that take place in and around the home or vehicle including fires with a live electrical source. As electricity may pose a significant secondary hazard, always ensure power is isolated before extinguishing a stove top fire. This dry chemical power extinguisher is also suitable for fires involving all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment making it perfect for caravans, homes, vehicles and small garages.
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
PIRTEK ITEM CODE:
ME15ABE
NOZZLE SIZE:
3.2MM
AGENT CAPACITY:
1.5KG
NET MASS:
1.5KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
3.2KG
WORKING PRESSURE:
1400KPA AT 23°C
WITDH:
100MM
TEST PRESSURE:
2.5MPA
HEIGHT:
380MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
25668-DA-6319
VALVE FINISH:
NICKEL PLATED BRASS
DISCHARGE TIME:
12 SECONDS
HANDLE FINISH:
STAINLESS STEEL
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
MegaFire’s 1.5KG extinguisher is targeted at the home and leisure user. Typical applications for this extinguisher would be caravans, boats, homes, small garages and workshops. Fires origninating from any of the above locations can quickly get out of control, so with the more punch 1.5KG model, this extinguisher is the perfect combination between power and size to knock down all potential fire quickly before damaging any equipment. This 1.5KG dry chemical power extinguisher is a competant all rounder and is suitable for fires involving all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, all of which could be found around the house or within any of your leisure locations or equipment.
SPECIALIST IN FIRE SAFETY PRODUCTS
1.5KG MEGAFIRE ABE RATING 2A:20B:E
2.0KG MEGAFIRE ABE RATING 3A:30B:E PIRTEK ITEM CODE:
ME20ABE
NOZZLE SIZE:
3.8MM
AGENT CAPACITY:
2.0KG
NET MASS:
2.0KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
3.9KG
WORKING PRESSURE:
1400KPA AT 23°C
WITDH:
110MM
TEST PRESSURE:
2.5MPA
HEIGHT:
420MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
25668-DA-6305
VALVE FINISH:
NICKEL PLATED BRASS
DISCHARGE TIME:
11.3 SECONDS
HANDLE FINISH:
STAINLESS STEEL
SPECIALIST IN FIRE SAFETY PRODUCTS
Fires in garages and workshops are a serious matter. The typical garage or workshop contains a host of flammable materials, from liquids such as petroleum and paint thinner to wood, sawdust and greasy rags. Garages and workshops also contain heat sources such as water heaters and furnaces that can ignite a fire. MegaFire’s 2.0KG all purpose ABE dry chemical power portable fire extinguisher fits right into this category for the best protection possible. This extinguisher comes with a vehicle bracket for your car, truck or boat. When you cut or sand wood, you create sawdust and wood chips. These small pieces of wood are much more combustible than larger boards. Sweep them up right away and you will eliminate a big source of workshop fires.
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
PIRTEK ITEM CODE:
ME25ABE
NOZZLE SIZE:
3.2MM
AGENT CAPACITY:
2.5KG
NET MASS:
2.5KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
4.9KG
WORKING PRESSURE:
1400KPA AT 23°C
WITDH:
130MM
TEST PRESSURE:
2.5MPA
HEIGHT:
445MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
25668-DA-6309
VALVE FINISH:
NICKEL PLATED BRASS
DISCHARGE TIME:
14.3 SECONDS
HANDLE FINISH:
STAINLESS STEEL
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
MegaFire’s 2.5KG ABE offers higher rating and a greater knock down over larger areas such as a small offices or home lounge spaces. Offices have general fire risks from things such as desks, chairs and waste paper bins but will also contain electrical equipment. The dry chemical power makes this type of extinguisher safe and perfect to use around live electrical equipment as well as for fires involving all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment. With more extinguishing power and longer discharge time, you can be confident having this extinguisher around your home or office having the ability to fight the potential danger.
SPECIALIST IN FIRE SAFETY PRODUCTS
2.5KG MEGAFIRE ABE RATING 1A:20B:E
4.5KG MEGAFIRE ABE RATING 4A:60B:E PIRTEK ITEM CODE:
ME45ABE
NOZZLE SIZE:
2.0MM
AGENT CAPACITY:
4.5KG
NET MASS:
4.5KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
7.8KG
WORKING PRESSURE:
1400KPA AT 23°C
WITDH:
145MM
TEST PRESSURE:
2.5MPA
HEIGHT:
560MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
20621 - DA - 6311
VALVE FINISH:
NICKEL PLATED BRASS
DISCHARGE TIME:
19 SECONDS
HANDLE FINISH:
STAINLESS STEEL
SPECIALIST IN FIRE SAFETY PRODUCTS
MegaFire’s 4.5KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used. It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fine powder is discharged that may cause specific concerns or damage. Note: Vehicle mounting brackets are also available. Supplied with wall mounting bracket as standard.
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
PIRTEK ITEM CODE:
ME9ABE
NOZZLE SIZE:
6.0MM
AGENT CAPACITY:
9.0KG
NET MASS:
9.0KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
13.9KG
WORKING PRESSURE:
1400KPA AT 23°C
WITDH:
185MM
TEST PRESSURE:
2.5MPA
HEIGHT:
620MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
FERN NO:
20621 - DA - 6315
VALVE FINISH:
NICKEL PLATED BRASS
HANDLE FINISH:
STAINLESS STEEL
DISCHARGE TIME:
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
MegaFire’s 9.0KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used. It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fine powder is discharged that may cause specific concerns or damage. Note: Vehicle mounting brackets are also available. Supplied with wall mounting bracket as standard.
SPECIALIST IN FIRE SAFETY PRODUCTS
9.0KG MEGAFIRE ABE RATING 6A:80B:E
4.5KG MEGAFIRE HP RATING 4A:80B:E PIRTEK ITEM CODE:
ME45ABEM
NOZZLE SIZE:
4.0MM
AGENT CAPACITY:
4.5KG
NET MASS:
4.5KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
7.9KG
WORKING PRESSURE:
1400KPA AT 23째C
WITDH:
145MM
TEST PRESSURE:
2.5MPA
HEIGHT:
500MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
DISCHARGE TIME:
22 SECONDS
VALVE FINISH:
NICKEL PLATED BRASS
HANDLE FINISH:
STAINLESS STEEL
SPECIALIST IN FIRE SAFETY PRODUCTS
HIGH PERFORMANCE HEAVY DUTY These MegaFire High Performance Fire Extinguishers have an extra heavy duty valve, thicker cylinder steel, more robust base, higher percentage of powder and designed for tough conditions typically experienced in mining and heavy construction vehicles and equipment.
Note: Vehicle mounting brackets are also available. Supplied with wall mounting bracket as standard.
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
PIRTEK ITEM CODE:
ME9ABEM
NOZZLE SIZE:
6.0MM
AGENT CAPACITY:
9.0KG
NET MASS:
9.0KG
AGENT TYPE:
DRY CHEMICAL POWDER
GROSS MASS CHARGED:
14.2KG
WORKING PRESSURE:
1400KPA AT 23째C
WITDH:
183MM
TEST PRESSURE:
2.5MPA
HEIGHT:
555MM
APPROVALS:
AS/NZS 1841.5
CYLINDER FINISH:
POWDER COATED RED
DISCHARGE TIME:
22 SECONDS
VALVE FINISH:
NICKEL PLATED BRASS
HANDLE FINISH:
STAINLESS STEEL
CYLINDER CONSTRUCTION:
STEEL
VALVE CONSTRUCTION:
BRASS
HIGH PERFORMANCE HEAVY DUTY These MegaFire High Performance Fire Extinguishers have an extra heavy duty valve, thicker cylinder steel, more robust base and designed for tough conditions typically experienced in mining and heavy construction vehicles and equipment.
Note: Vehicle mounting brackets are also available. Supplied with wall mounting bracket as standard.
SPECIALIST IN FIRE SAFETY PRODUCTS
9.0KG MEGAFIRE HP RATING 6A:80B:E
3.5KG MEGAFIRE CO2 RATING 50B:E
SPECIALIST IN FIRE SAFETY PRODUCTS
PIRTEK ITEM CODE:
ME35CO2
NET MASS:
3.5KG
AGENT CAPACITY:
3.5KG
GROSS MASS CHARGED:
5.1KG
AGENT TYPE:
CARBON DIOXIDE
WITDH:
153MM
PERIODIC TEST PRESSURE:
21.5 MPA
HEIGHT:
535MM
CYLINDER PRESSURE TEST:
5 YEARLY
CYLINDER FINISH:
POWDER COATED RED
FIRE RATING:
5B:E
VALVE FINISH:
NICKEL PLATED BRASS
APPROVALS:
AS/NZS 1841.6
HANDLE FINISH:
STAINLESS STEEL
FERN NO:
22111-DG-7105
CYLINDER CONSTRUCTION:
ALUMINIUM
DISCHARGE TIME:
10.5 - 14 SECONDS
VALVE CONSTRUCTION:
BRASS
MegaFire’s 3.5KG CO2 is suitable for use against electrically energised equipment and in electrical environments (Class E), the 3.5kg Carbon Dioxide (CO2) extinguisher has been manufactured to Australian Standards, utilising state of the art production facilities. Extracted from the atmosphere, CO2 is stored in a liquid state and at a high pressure. The effect of a CO2 extinguisher can be limited where there is air movement and discharge within a confined space is definitely NOT recommended.
Supplied with wall mounting bracket as standard.
PIRTEK ITEM CODE:
ME5CO2
NET MASS:
5.0KG
AGENT CAPACITY:
5.0KG
GROSS MASS CHARGED:
12.0KG
AGENT TYPE:
CARBON DIOXIDE
WITDH:
153MM
PERIODIC TEST PRESSURE:
21.5 MPA
HEIGHT:
680MM
CYLINDER PRESSURE TEST:
5 YEARLY
CYLINDER FINISH:
POWDER COATED RED
FIRE RATING:
10B:E
VALVE FINISH:
NICKEL PLATED BRASS
APPROVALS:
AS/NZS 1841.6
HANDLE FINISH:
STAINLESS STEEL
FERN NO:
22111-DG-7106
CYLINDER CONSTRUCTION:
ALUMINIUM
DISCHARGE TIME:
13 - 16 SECONDS
VALVE CONSTRUCTION:
BRASS
MegaFire’s 3.5KG CO2 is suitable for use against electrically energised equipment and in electrical environments (Class E), the 5.0kg Carbon Dioxide (CO2) extinguisher has been manufactured to Australian Standards, utilising state of the art production facilities.
Extracted from the atmosphere, CO2 is stored in a liquid state and at a high pressure. The effect of a CO2 extinguisher can be limited where there is air movement and discharge within a confined space is definitely NOT recommended. Supplied with wall mounting bracket as standard.
SPECIALIST IN FIRE SAFETY PRODUCTS
5.0KG MEGAFIRE CO2 RATING 10B:E
9.0L MEGAFIRE AFFF RATING 3A:30B
SPECIALIST IN FIRE SAFETY PRODUCTS
PIRTEK ITEM CODE:
ME9LAF
NET MASS:
9.0KG
AGENT CAPACITY:
9 LITRES
GROSS MASS CHARGED:
12.1KG
AGENT TYPE:
AFFF CONCENTRATE
WITDH:
181MM
PRESSURE:
700KPA
HEIGHT:
630MM
PERIODIC TEST PRESSURE:
2.5MPA
CYLINDER FINISH:
POWDER COATED RED
CYLINDER PRESSURE TEST:
5 YEARLY
VALVE FINISH:
NICKEL PLATED BRASS
FIRE RATING:
3A:30B
HANDLE FINISH:
STAINLESS STEEL
APPROVALS:
AS/NZS 1841.4
CYLINDER CONSTRUCTION:
STAINLESS STEEL
FERN NO:
20422-LM-5401
VALVE CONSTRUCTION:
BRASS
DISCHARGE TIME:
32 SECONDS
EFFECTIVE RANGE:
6 METRES
MegaFire’s 9L AFFF foam fire extinguisher contains a concentrate mixed with water which produces a foam when discharged (Aqueous Film Forming Foam). Available in a 9.0 Litre capacity, the foam extinguisher is best suited for the use against fires that involve flammable and combustible liquids such as paper, textiles, wood, petrol, oil, paints, plastics and rubber. Like the water fire extinguisher, a foam extinguisher should never be used on fires involving live electrical equipment or in any sort of electrical environment.
Note: Vehicle mounting brackets are also available. Supplied with wall mounting bracket as standard.
PIRTEK ITEM CODE:
PIRTEK ITEM CODE:
MEVB45C
MEVB9C
DESCRIPTION
DESCRIPTION
HEAVY DUTY - BLACK POWDER COATED BRACKET
HEAVY DUTY - BLACK POWDER COATED BRACKET
• FITS UP TO 4.5KG CANNON STYLE
• FITS UP TO 9.0KG CANNON STYLE
PIRTEK ITEM CODE:
PIRTEK ITEM CODE:
MEVB45CG
MEVB9CG
DESCRIPTION
DESCRIPTION
HEAVY DUTY - GALVANISED BRACKET
HEAVY DUTY - GALVANISED BRACKET
• FITS UP TO 4.5KG CANNON STYLE
• FITS UP TO 9.0KG CANNON STYLE
PIRTEK ITEM CODE:
PIRTEK ITEM CODE:
MEVB45QR
MEVB9QR
DESCRIPTION
DESCRIPTION
HEAVY DUTY - OVER CENTRE BRACKET
HEAVY DUTY - OVER CENTRE BRACKET
• FITS 4.5KG EXTINGUISHERS
• FITS 9.0KG EXTINGUISHERS
SPECIALIST IN FIRE SAFETY PRODUCTS
VEHICLE BRACKETS