opus press oily water separator

Page 1

OPUS Pressure Type

Oily Water Separator


Oil/Water Separation The RWO oil/water separation system type OPUS complies with the actual IMO Resolution MEPC.107 (49), using the combination of highly effective open porous coalescer with automatic backflushing, together with a second stage emulsion breaking oil and hydrocarbon polisher. The OPUS is based on the excellent and long experience of RWO‘s SKIT/S and SKIT/S-DEB oily water separator series, guaranting a high performance standard. The periodical backflushing keeps the coalescer surface clean and offers long lasting operation without attendance and lowest maintenance. Other than RWO‘s suction type SKIT series, the OPUS is a pressure driven system. This allowing e.g. the – loosely supplied – separator feed pump being installed at or on top of the bilge holding tank in case the oily water separator‘s location being too high above the bilge holding tank level. Furthermore, by individual interconnection the feed pump could also serve other pumping requirements on board.

More tha n 10,000 sh ips have a lready been h equ ipped w it ily o O eff icient RW tor ra a p e water s systems. The system comes as a complete package, skid mounted with all necessary accessories and controls and providing the following benefits:

exceptionally high purity levels < 1 ppm oil content in the effluent under IMO conditions

USCG type approval certified EMV-Electromagnetic Compliance

class Notations “Clean Design” and Alaska-Rules conformity

easy to install and easy to handle worldwide service & support OPUS 5.0

2


Features To extend the operating life of the demulsifier, an automatic bypass is fitted to the separating system. The 15ppm oil content measuring device periodically checks the water quality of the OPUS first stage separator and, if below 15ppm, the demulsifier is bypassed until the 15ppm alarm is activated. This process control causing a considerable life cycle prolongation.

15ppm oil content monitor The RWO oily water separating system is equipped with the 15ppm oil content alarm device, type tested and approved in accordance with IMO Resolution MEPC.107 (49). The 3-way cock for flushing is fitted with a contact (automatic stopping device) to ensure that the 3-way diverting valve is in recirculation mode during flushing of the alarm device. According to IMO Resolution MEPC.107(49) an extra 3-way valve is installed downstream of the oily water separator in the overboard line to recirculate the water to the bilge whenever required during Port State Control.

The OPUS oil/water separator can – like the SKIT/S

and SKIT/S-DEB – be equipped with a Splitting and Filtration (SFU) pretreatment stage in case of very difficult bilgewater composition. SFU – Splitting and Filtration Unit

3


Technical Data OPUS Type

Capacity 3 (m /h)

A

B

C

D

E

F+G

H+I

Power kW

0.1

0.1

1100

715

650

-

-

610+260=870

500

0.5

0.5

1170

1190

720

0.25

0.25

1.0

0.5 1.5

1120

1075

1.0

1280

1325

2.5

1780

1.5

2.5

5.0

5.0

10.0

10.0

380

750+300=1050

530+260=790

2.0

820

1040

450

1060+385=1445

780+510=1290

2.7

260

1515

1095

1225

750

1420+600=2020

3.0

510

2410

1560

1300

1895+600=2495

1455

2000

1935

2415

86

822

1545

770

Empty weight kg

870

1350

870

350

1185

500

1625

1050

1880

860+350=1210

780+510=1290

1265+430=1695

1035+510=1545

1610+600=2210

1295+510=1805

780+510=1290

1315+510=1825

2.7

2.7

4.0 4.5

185

230

340

850

1200

- Data are subject to change without further notice dismantling height

17 17

42 42

55A 55A 55B 55B 23B 23B

G

bar

View A

25B 25B

3 4 5 9 10

33

14 47 47

47 47

22

A F

25A 25A

17 22

H

74 74

23B 25A

22 22

B

25B

B

42 47 55A

B

55B

B-B

99

74

L OUT

C

E

55

Power supply Control box Oil discharge Backwashing outlet Sensor electrode Electrical heating Feed pump 15ppm oil alarm monitor Bilge water inlet Recirculation to bilge tank Sample water inlet Flushing water inlet IMO-sample cock Polisher Discharge to overboard Recirculation to bilge tank Backwashing inlet

44

K DN Ă˜N

IN

10 10

D

74 74

RWO GmbH Marine Water Technology Thalenhorststrasse 15 A 28307 Bremen/Germany Phone: +49 421 537050 Fax: +49 421 53705440 rwo@veoliawater.com www.rwo.de www.veoliawater.com

14

M

A

2

Aktueller Stand: 09/08

10 10

I

5


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.