Choose Prime Adhere

ADHERE AMERICA, INC.

A high performance, single component, polyacrylic sealer ideal for roofing, negative side repairs & many other applications.

Choose

PRIME ADHERE

— A high performance, single component, polyacrylic sealer ideal for roofing & negative side repairs

• Seal the toughest materials, such as as metal roofs and Kynar, with Prime Adhere

• Apply Prime Adhere in the presence

• of moisture and oil and watch as it sticks

• to the surface where other materials fail

• Solve your movement problems with

• and return to its original condition

PRODUCT DESCRIPTION:

Prime Adhere is a unique gunnable sealant that works under demanding conditions where other sealants fail. In damp conditions where oil or water may be present, Prime Adhere will grip to the surface and retain its hold. The specialized formulation of Prime Adhere makes it the perfect choice for sealing metal roofs and siding. Prime Adhere is designed to handle situations where movement and temperature variations are major factors. Prime Adhere is also an excellent option for the permanent air-tight bonding of vapor barrier sheets used in roofing applications.

BENEFITS:

• Environmentally friendly

• Low V.O.C. content (219 g/l)

• Paintable one hour after application

• Weather resistant

• Long-lasting

• U.V. resistant

• Adheres to non-porous & damp substrates

• Bitumen compatible

• Contains no tuolene or other petroleum distillates

WHERE TO USE:

• New & old concrete

aluminum

• Most masonry surfaces

• Hard PVC

• Metal roofs

• Brickwork

• Heating & air conditioning ducts

• Metal siding

• RVs

• Manufactured homes

• Plaster

• Gypsum

• Flashings

• Anodized

• Plastic pipes

FOR MORE INFORMATION, CONTACT US AT:

1712 6th Ave., Suite 1042

Tacoma, Washington 98409-7303 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

E-mail: info@adhereamerica.com

Web: www.adhereamerica.com

Available Sizes:

10.5 oz./310 ml tubes

13.5 oz./400 ml sausages

22.3 oz./600 ml sausages

Bulk packaging sizes

available on request

©2020, Adhere America, Inc., All Rights Reserved Product Information Sheet –

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

ADHERE AMERICA, INC.

PRIME ADHERE™

STICKS TO DAMP & OILY SURFACES WHERE OTHER SEALANTS FAIL

Take Prime Adhere, use it to seal a problem roof, siding or gutter and then relax. Your task is finished. The seal will last. You don’t have to worry any further. Enjoy peace of mind, knowing the job’s well done. Prime Adhere is specially designed to be used in demanding applications where dampness, movement and temperature are major factors. Where other sealants fail to do the job, Prime Adhere grabs the surface and sticks and keeps on sticking, and sticking, and sticking. Prime Adhere delivers outstanding adhesion performance even in humid substrates where oil and gas may be present. Like all products from Adhere America , Prime Adhere is a “Best in Class Problem Solver.”

Special Properties

❑ Bitumen compatible

❑ Free of isocyanate & silicone

❑ Environmentally friendly

❑ Compatible with paints in accordance with DIN 52452-4, A1 & A2

❑ Weather-resistant

❑ Aging-resistant

❑ Good UV resistance

❑ Long shelf-life

❑ Perfect for permanent air-tight bonding of vapor barrier sheets in roofing applications

❑ Seals to almost all substrates, even on non-porous, humid, damp substrates

❑ Available in 3 colors: Clear, White and Black.

❑ Paintable within 1 hour

Fields of Application

❑ Prime Adhere creates a permanent air-tight bond in connecting joints and overlaps between roofs and walls that experience moderate movement stress and is especially effective when used on the following surfaces:

❑ Concrete

❑ Masonry

❑ Brickwork

❑ Plaster

❑ Gypsum

❑ Wood

❑ Anodized Aluminum

❑ Plywood

❑ Hard PVC

❑ Other applications where Prime Adhere may be used include but are not limited to:

❑ Sealing and Jointing

❑ Roofing Felts

❑ Joints around Doors

❑ Joints around Dormer Windows

❑ Door Jams

❑ Vents

❑ Gutters

❑ Siding

❑ Roofs

❑ Flashing

❑ Plastic Pipes

❑ Heating & Air Conditioning Ducts

❑ Problem Surfaces such as Galvanized Metal, Plaster & Gypsum (see above)

❑ Prime Adhere is ideal for use in the Marine Industry, including to seal:

❑ Portholes

❑ Seams

❑ Instrument panels

❑ Deck hardware

❑ Transoms

NOTE: Prime Adhere must not be used in sanitary sector or on marble or natural stone. It also must not be used in high-traffic areas or in exposed areas where the sealant will be visible.

Yield

One 10.5 ounce tube (310 ml) of Prime Adhere is sufficient for completing about 31.5 feet (9.6 meters) of joints measuring 1⁄4" × 1⁄4" (6.25 mm x 6.25 mm) or about 7 1⁄2 feet (2.25 meters) of joints measuring 1⁄2 " × 1⁄2" (12.7 mm × 12.7 mm).

Colors & Packaging

Prime Adhere comes in three colors: Clear, White and Black. Prime Adhere is available in 10.5 ounce (310 ml) cartridges, packed in cases of 20 tubes. Other sizes of packaging are available by request on a special order basis.

Application Information

SUBSTRATE PRETREATMENT: The substrate must be firm and free of dust and grease. Before applying Prime Adhere, remove all cement slurry, mold release agents and impregnations. In renovation projects, old sealants and remains of paint and loose material must be fully removed. The joint must always be provided with a suitable, correctly dimensioned joint backing, such as, for example, PE cord or PE sheeting, to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before applying a primer and filling the joint with Prime Adhere.

JOINT DIMENSIONS: For joint widths of a minimum of .2" (5 mm), a square cross-section is advised. For wider joints (up to 1.5" [38 mm] maximum), the ideal joint depth should be equal to half the joint width in accordance with DIN 18540, Sheet 3. Make sure that triangular bevels have uniform sides of equal length with at least 1⁄4" (7 mm) of bonding surface.

SMOOTHING: After applying Prime Adhere with a suitable hand-operated, battery-powered or pneumatic caulking gun, Prime Adhere can be smoothed in the joint with water or with a neutral, non-staining water-based smoothing agent and a suitable tool (e.g. a jointing trowel). Any adhesive tape used can be removed immediately after smoothing.

IMPORTANT INFORMATION: Clean tools with solvent immediately after use. Cured Prime Adhere must be removed mechanically. Remaining residues can be softened with solvent and wiped off some time later. The product cures by means of drying. High humidity, low temperature and joint depth above 9⁄16" (15 mm) can delay skin formation and curing significantly. During drying, the color will slightly change.

The product is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend that you conduct your own tests concerning compatibility and adhesion prior to application. Joints subject to expansion must not be painted over, since most paint systems will crack due to their lower elasticity when compared to Prime

Adhere. If joints with low movement are painted over, Prime Adhere must be allowed to dry for at least seven days before the paint is applied.

The function of the product can only be guaranteed if correctly applied in accordance with the technical recommendations given in this data sheet and related standards. Application in situations with strongly fluctuating temperatures that may cause premature stressing should be avoided.

Technical Data (Metric)

Density (DIN EN ISO 2811-1)

Skin Forming Time (23° C/50% F)

Penetration (DIN 51579 / 5 sek.)

Slump (in accordance with ASTM 2202)

Shore A Hardness (DIN 53505, 28 d)

Tensile Modulus (DIN EN ISO 8339-A, 100%)

Maximum Movement Tolerance

Mass Loss (DIN EN ISO 10563)

Water Vapor Diffusions Resistance

(23°C, 50% => 0%)

Application Temperature (sealant & substrate)

Temperature Stability (fully-cured sealant)

Shelf Life (originally closed packaging)

1.05 ± 0.03 g/cm3

Approximately 30 minutes

200 ± 30 1/10 mm

≤ 2 mm

10 ± 4 units

Approximately 0.1 N/mm2

25%

Maximum 30%

m = approximately 3500

sd = approximately 35 m (10 mm thickness of sealant)

+5° C to +35° C

-25° C to +80° C

24 months (stored at +5° C to +35° C)

Rate of curing depends on temperature, humidity and substrate absorbency. The data given refer to tests at standard conditions (73° F [23° C] / 50 percent relative humidity). Low temperature, high humidity and joint depth above 9⁄16" (15 mm) will retard skin formation and curing significantly.

Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specification purposes.

For safety data, see Safety Data Sheet. Take all preventive measures specified in the Safety Data Sheet and in the hazard markings to prevent accidents and protect health.

Information provided in this data sheet is based on the current state of knowledge. This does not exempt purchasers from carrying out their own careful inspections of incoming goods in individual cases. We reserve the right to make changes to the product data in the course of technical progress or due to operationally-related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by customers. Our recommendations do not exempt customers from the obligation to check any infringements of third-party rights themselves and eliminate them if necessary. The suggestions made herein for product use are not equivalent to a warranty of its suitability for the recommended purpose.

Each new release of this data sheet supersedes the previous one.

For more information, contact: ADHERE

1712 6th Ave., Suite 1042 Tacoma, Washington 98409-7303 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

Email: info@adhereamerica.com

Web: www.adhereamerica.com

©2022, Adhere America, Inc.

THE MANY PLACES & MANY WAYS TO USE PRIME ADHERE

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary ability to block vapors from spreading.

STUCCO STRUCTURES

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

DECORATIVE LEDGES & BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

ETC., ETC., ETC.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. walls.

15 Advantages of Choosing Prime Adhere

1. Prime Adhere adheres to a wide range of surfaces where other sealants fail.

2. Think of Prime Adhere as a liquid gasket that seals everything.

3. Prime Adhere sticks through water and oil. Common uses include leaky gutters, metal roofs and siding, port holes and transoms, and more. Adhere can be applied directly to a leak with water present and it will immediately stop the leak.

4. Prime Adhere never ever loses its adhesion. Weeks, months and years later, it will still exhibit tackiness and it will still adhere to new surfaces.

5. Prime Adhere never loses its flexibility, no matter how much time has passed.

6. Prime Adhere is ideal for applications where flexibility and movement are issues, like with metal roofs or metal siding. Adhere expands and contracts with them as temperatures change, never losing its adhesion and always healing itself.

7. Prime Adhere can be applied at temperatures as high as 98º F or as low as 14º F.

8. Prime Adhere has a wide range of applications and is paintable in one hour.

9. Prime Adhere is bitumen-compatible and contains no silicates or silicones.

10. Prime Adhere is compliant with California Proposition 65 regulations.

11. Prime Adhere is non-toxic and far safer to use than competing products.

12. Prime Adhere will work for years without suffering the usual effects of aging.

13. Prime Adhere creates a permanent, air-tight bond, stopping leaks on contact.

14. Prime Adhere never gets hard or brittle.

15. Prime Adhere saves money in the long run because you don’t have to return to the job site after the initial application to make repairs.

“Seal it once and forget it” perfectly describes Prime Adhere.

Three Good Reasons Why Roofers Love Using PRIME ADHERE™

1. SEAL IT ONCE AND FORGET IT. Ta ke Prime Adhere, use it to seal your roof, siding or gutter job and then relax. Your task is finished. The seal will last. The bond will not break. The flexibility will not be lost. You needn’t worry any further. Enjoy peace of mind, secure in the knowledge the job’s well done.

2. IT’S RAINING OUTSIDE, YOU SAY? NO PROBLEM. Prime Adhere sticks to damp and oily surfaces where other sealants fail. You can apply it when it’s raining and it still seals the job. You no longer have to depend on sealants that can be applied only when the weather decides to cooperate. Fair weather or foul, Prime Adhere does the job.

3.WORRIES ABOUT TEMPERATURE CHANGES ARE A THING OF THE PAST. Prime Adhere is specially designed for use in demanding applications where movement and temperature are major factors. As you know all too well, metal roofs expand and contract as temperatures rise and fall. Sooner or later, lesser sealants fail when faced with such conditions, but not Prime Adhere. Prime Adhere never loses its flexibility or its ability to heal itself. It stretches with the heat, contracts with the cold, and always heals itself, keeping your seal intact.

Give Prime Adhere a try. You’ll be glad you did.

ADHERE AMERICA, INC.

SAFETY DATA SHEET

SECTION I SUPPLIER & PRODUCT INFORMATION

Product Identification: Prime Adhere

Product Class: Single component, solvent-based acrylic sealant and adhesive

Trade Name: Prime Adhere

DOT Shipping Name: N/A

Formula Version Number: 2

SDS Preparation Date: 23 September 2014

Most Recent SDS Revision Date: 10 September 2020

Supplier Name: Adhere America, Inc.

Supplier Address: 1712 6th Ave., Suite 1042, Tacoma, Washington 98409-7303 USA

Supplier Telephone: +1 (206) 759.1901

Supplier Fax: +1 (844) 369.5351

Supplier Emergency 24-Hour Telephone: +1 (206) 362.4405

Chemical Name: Acrylic sealant

SECTION II — COMPOSITION / INFORMATION ON INGREDIENTS

No other hazardous ingredients. This product should not be considered a hazardous material.

SECTION III — HAZARDS IDENTIFICATION

Emergency Overview: White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Non-combustible.

Eye Contact: Possible: Causes moderate irritation to the eyes.

Skin Contact: Possible: May cause mild irritation to the skin.

Inhalation: Possible: Only after prolonged exposure.

Ingestion: Possible: May cause irritation to mouth, esophagus & stomach.

SECTION IV FIRST AID MEASURES

Eye: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.

Skin: In case of contact, immediately flush skin with plenty of water. Inhalation: Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult.

Ingestion: If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — FIRE-FIGHTING MEASURES

Flash Point (°F): Non-combustible.

Flammable Limits: This material is non-combustible. Extinguishing Media: This material is compatible with all extinguishing media.

Fire-fighting Equipment: The following protective equipment for fire fighters is recommended when this material is present in the area of a fire: chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION VI — ACCIDENTAL RELEASE MEASURES

Environmental Hazard: This substance is not identified as a PBT substance. Spillage: Sinks in but does not mix with water.

Waste Disposal Method: Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION VII — HANDLING & STORAGE

Handling: Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed.

Storage: Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION VIII EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation. Keep containers closed when not in use.

Respiratory Protection: None is necessary if used with adequate ventilation. Skin Protection: Wear protective gloves when possibility of contact exists.

Eye Protection: Use of protective eye goggles is recommended.

Protective Clothing: Use of protective clothing is recommended to avoid damage to regular clothing.

SECTION IX — PHYSICAL & CHEMICAL PROPERTIES

Appearance & Odor: Paste. Varies in color. Characteristic odor.

Specific Gravity: ≈1

Vapor Pressure: 11 millibars (hPA) / .16 psi

Flammability Limits % – Lower: 1.2; – Upper: 7.5

Autoflammability (°F): 698°F

Boiling Point (°F): 261°F

SECTION X — STABILITY & REACTIVITY

Stability: This material is stable when stored at room temperature.

Conditions to Avoid: Direct sunlight. Extreme heat. Hot surfaces. Sources of ignition. Flame.

Materials to Avoid: Strong oxidizing materials.

Hazardous Decomposition Products: In combustion emits toxic fumes of carbon dioxide / carbon monoxide.

SECTION XI — TOXICOLOGICAL INFORMATION

Acute Data: N/A.

Subchronic Data: N/A

Special Studies: N/A

SECTION XII ECOLOGICAL INFORMATION

Ecotoxicity: This product has not been tested for ecotoxicity potential.

Environmental Fate: This product poses no recognized environmental hazard.

Physical/Chemical: This product has no bioaccumulation potential..

SECTION XIII — DISPOSAL CONSIDERATIONS

Classification: Disposed material is not a hazardous waste.

Disposal Method: Dispose in accordance with federal, state and local regulations and permits.

SECTION XIV TRANSPORT INFORMATION

DOT UN Status: This material is not regarded as a hazardous material for transportation.

SECTION XV REGULATORY INFORMATION

CERCLA: No CERCLA Reportable Quantity has been established for this material.

SARA Title III: Not regarded as an Extremely Hazardous Substance under §302. Not regarded as a Toxic Chemical under §313. Hazard categories under §311 and §312: Acute.

TSCA: All ingredients of this material are listed in the TSCA Inventory.

SECTION XVI OTHER INFORMATION

Prepared By: AAI-JHO – 20200910.

A DH ER E WARRANTY

Adhere America, Inc. warrants that this product will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with the recommendations of Adhere America, Inc. If this product fails to meet this warrant y, the liability of Adhere America, Inc. will be limited to replacement of any non-conforming material. Adhere America, Inc. may, at its sole discretion, refund the purchase price in lieu of replacing the material. Except for the expressed warranty stated above, no other warranties, expressed or implied, including without limitation, any implied of fitness for purpose, are included in this warrant y. Adhere America, Inc. shall have no liability or responsibility to the purchaser or any third party for any loss, cost, expense, damage or liabilit y, whether direct or indirect, or for incidental or consequential damages.