Choose Prime Blockhouse

A singlecomponent sealant for indoor & outdoor use, with rough-cast-like surface and 20% maximum movement tolerance

Choose

PRIME BLOCKHOUSE

— Single-component sealant for indoor & outdoor use with roughcast-like surface and 20 — percent maximum movement tolerance —

PRODUCT DESCRIPTION:

Prime Blockhouse is specially formulated for use on substrates such as wood, wooden building materials, fiberboard, polystyrene, mineral fiber board, masonry, concrete and various kinds of plaster. For sealing structures such as log cabins, Prime Blockhouse is your perfect choice.

BENEFITS:

• Low odor • No isocyanates, solvents or silicones

• Suitable for outdoor use

WHERE TO USE:

• Compatible with paints

• Good U.V. & moisture resistance

• Wood • Wood-based building materials

• Masonry • Polystyrene

• Fiberboard

• Rough-cast surface

• Available in various wood colors

• Polystyrene

• Concrete • Various types of plaster

• Mineral fiber board

FOR MORE INFORMATION, CONTACT US AT:

1712 6th Avenue, Suite 1042

Tacoma, Washington 98409–1910 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

E-mail: info@adhereamerica.com

Web: www.adhereamerica.com

©2023, Adhere America, Inc.

Available Sizes:

310 ml tubes

400 ml sausages (special order)

600 ml sausages (special order)

5-gallon pails (special order)

55-gallon drums (special order)

Product Information Sheet – PRIME BLOCKHOUSE – Revised 3 February 2023

“Best in class problem solvers”

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

ADHERE AMERICA, INC.

PRIME BLOCKHOUSE™

A SINGLE-COMPONENT SEALANT FOR INDOOR & OUTDOOR USE WITH ROUGH SURFACES

Prime Blockhouse is a single-component sealant with a 20 percent maximum movement tolerance ideal for indoor and outdoor use with wooden structures. Prime Blockhouse cures to a roughcast, wood-like surface texture and comes in a variety of colors that match the colors of natural wood. Prime Blockhouse is specially formulated for use on substrates such as wood, wooden building materials, fiberboard, polystyrene, mineral fiber board, masonry, concrete and various kinds of plaster. For sealing structures such as log cabins, Prime Blockhouse is your perfect choice. Like all products from Adhere America, Prime Blockhouse is a “Best-in-Class Problem Solver.”

Special Properties

❑ Bitumen compatible

❑ Free of isocyanate & silicone

❑ Environmentally friendly

❑ Compatible with paints in accordance with DIN 52452-4, A1 & A2

❑ Weather-resistant

❑ Aging-resistant

❑ Good UV resistance

❑ Long shelf-life

❑ Perfect for permanent air-tight bonding of vapor barrier sheets in roofing applications

❑ Seals to almost all substrates, even on non-porous, humid, damp substrates

❑ Available in 3 colors: Clear, White and Black.

❑ Paintable within 1 hour

Fields of Application

❑ Prime Blockhouse creates a permanent air-tight bond in connecting joints and overlaps between roofs and walls that experience moderate movement stress and is especially effective when used on the following surfaces:

❑ Concrete

❑ Masonry

❑ Brickwork

❑ Plaster

❑ Gypsum

❑ Wood

❑ Anodized Aluminum

❑ Plywood

❑ Hard PVC

❑ Other applications where Prime Blockhouse may be used include but are not limited to:

❑ Sealing and Jointing

❑ Roofing Felts

❑ Joints around Doors

❑ Joints around Dormer Windows

❑ Door Jams

❑ Vents

❑ Gutters

❑ Siding

❑ Roofs

❑ Flashing

❑ Plastic Pipes

❑ Heating & Air Conditioning Ducts

❑ Problem Surfaces such as Galvanized Metal, Plaster & Gypsum (see above)

❑ Prime Blockhouse is ideal for use in the Marine Industry, including to seal:

❑ Portholes

❑ Seams

❑ Instrument panels

❑ Deck hardware

❑ Transoms

NOTE: Prime Blockhouse must not be used in sanitary sector or on marble or natural stone. It also must not be used in high-traffic areas or in exposed areas where the sealant will be visible.

Yield

One 10.5 ounce tube (310 ml) of Prime Adhere is sufficient for completing about 31.5 feet (9.6 meters) of joints measuring 1⁄4" × 1⁄4" (6.25 mm x 6.25 mm) or about 7 1⁄2 feet (2.25 meters) of joints measuring 1⁄2" × 1⁄2" (12.7 mm × 12.7 mm).

Colors & Packaging

Prime Adhere comes in three colors: Clear, White and Black. Prime Adhere is available in 10.5 ounce (310 ml) cartridges, packed in cases of 20 tubes. Other sizes of packaging are available by request on a special order basis.

Application Information

SUBSTRATE PRETREATMENT: The substrate must be firm and free of dust and grease. Before applying Prime Adhere, remove all cement slurry, mold release agents and impregnations. In renovation projects, old sealants and remains of paint and loose material must be fully removed. The joint must always be provided with a suitable, correctly dimensioned joint backing, such as, for example, PE cord or PE sheeting, to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before applying a primer and filling the joint with Prime Adhere.

JOINT DIMENSIONS: For joint widths of a minimum of .2" (5 mm), a square cross-section is advised. For wider joints (up to 1.5" [38 mm] maximum), the ideal joint depth should be equal to half the joint width in accordance with DIN 18540, Sheet 3. Make sure that triangular bevels have uniform sides of equal length with at least 1⁄4" (7 mm) of bonding surface.

SMOOTHING: After applying Prime Adhere with a suitable hand-operated, battery-powered or pneumatic caulking gun, Prime Adhere can be smoothed in the joint with water or with a neutral, non-staining water-based smoothing agent and a suitable tool (e.g. a jointing trowel). Any adhesive tape used can be removed immediately after smoothing.

IMPORTANT INFORMATION: Clean tools with solvent immediately after use. Cured Prime Adhere must be removed mechanically. Remaining residues can be softened with solvent and wiped off some time later. The product cures by means of drying. High humidity, low temperature and joint depth above 9⁄16" (15 mm) can delay skin formation and curing significantly. During drying, the color will slightly change.

The product is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend that you conduct your own tests concerning compatibility and adhesion prior to application. Joints subject to expansion must not be painted over, since most paint systems will crack due to their lower elasticity when compared to Prime

Adhere. If joints with low movement are painted over, Prime Adhere must be allowed to dry for at least seven days before the paint is applied.

The function of the product can only be guaranteed if correctly applied in accordance with the technical recommendations given in this data sheet and related standards. Application in situations with strongly fluctuating temperatures that may cause premature stressing should be avoided.

Technical Data (Metric)

Density (DIN EN ISO 2811-1)

Skin Forming Time (23° C/50% F)

Penetration (DIN 51579 / 5 sek.)

Slump (in accordance with ASTM 2202)

Shore A Hardness (DIN 53505, 28 d)

Tensile Modulus (DIN EN ISO 8339-A, 100%)

Maximum Movement Tolerance

Mass Loss (DIN EN ISO 10563)

Water Vapor Diffusions Resistance

(23°C, 50% => 0%)

Application Temperature (sealant & substrate)

Temperature Stability (fully-cured sealant)

Shelf Life (originally closed packaging)

1.05 ± 0.03 g/cm3

Approximately 30 minutes

200 ± 30 1/10 mm

≤ 2 mm

10 ± 4 units

Approximately 0.1 N/mm2

25%

Maximum 30%

m = approximately 3500

sd = approximately 35 m (10 mm thickness of sealant)

+5° C to +35° C

-25° C to +80° C

24 months (stored at +5° C to +35° C)

Rate of curing depends on temperature, humidity and substrate absorbency. The data given refer to tests at standard conditions (73° F [23° C] / 50 percent relative humidity). Low temperature, high humidity and joint depth above 9⁄16" (15 mm) will retard skin formation and curing significantly.

Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specification purposes.

For safety data, see Safety Data Sheet. Take all preventive measures specified in the Safety Data Sheet and in the hazard markings to prevent accidents and protect health.

Information provided in this data sheet is based on the current state of knowledge. This does not exempt purchasers from carrying out their own careful inspections of incoming goods in individual cases. We reserve the right to make changes to the product data in the course of technical progress or due to operationally-related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by customers. Our recommendations do not exempt customers from the obligation to check any infringements of third-party rights themselves and eliminate them if necessary. The suggestions made herein for product use are not equivalent to a warranty of its suitability for the recommended purpose.

Each new release of this data sheet supersedes the previous one.

THE MANY PLACES & MANY WAYS TO USE PRIME BLOCKHOUSE

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary ability to block vapors from spreading.

STUCCO STRUCTURES

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

DECORATIVE LEDGES & BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

ETC., ETC., ETC.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. walls.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

ADHERE AMERICA, INC.

SAFETY DATA SHEET

SECTION I SUPPLIER & PRODUCT INFORMATION

Product Identification: Prime Blockhouse

Product Class: Single component, solvent-based acrylic sealant and adhesive

Trade Name: Prime Blockhouse

DOT Shipping Name: N/A

SDS Preparation Date: 3 September 2014

Most Recent SDS Revision Date: 3 February 2023

Supplier Name: Adhere America, Inc. d.b.a. Prime Sealants

Supplier Address: 1712 6th Ave., Suite 1042, Tacoma, Washington 98409-7303

USA

Supplier Telephone: +1 (206) 759.1901

Supplier Fax: +1 (844) 369.5351

Supplier Emergency 24-Hour Telephone: +1 (707) 362.4405

Supplier Website: www.adhereamerica.com

Recommended Use: Create airtight bonds in connecting joints and overlaps between roofs and walls

Restrictions on Use: None

SECTION II COMPOSITION / INFORMATION ON INGREDIENTS

No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.

SECTION III — HAZARDS IDENTIFICATION

Emergency Overview: White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkalinity of product, release of product into surface water may be harmful to aquatic life. Non-combustible.

Eye Contact: Possible: Causes moderate irritation to the eyes.

Skin Contact: Possible: May cause mild irritation to the skin.

Inhalation: Possible: Only after prolonged exposure.

Ingestion: Possible: May cause irritation to mouth, esophagus & stomach.

SECTION IV FIRST AID MEASURES

Contact with Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.

Contact with Skin: Immediately flush skin with plenty of water.

Inhalation: Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult.

Ingestion: If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — FIRE-FIGHTING MEASURES

Flash Point (°F): Non-combustible.

Flammable Limits: This material is non-combustible.

Extinguishing Media: This material is compatible with all extinguishing media.

Fire-fighting Equipment: The following protective equipment for fire fighters is recommended when this material is present in the area of a fire: chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION VI ACCIDENTAL RELEASE MEASURES

Environmental Hazard: High pH (alkalinity) of undiluted or un-neutralized material. Spillage: Sinks in but does not mix with water.

Waste Disposal Method: Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION VII — HANDLING & STORAGE

Handling: Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed. Storage: Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION VIII EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation. Keep containers closed when not in use.

Respiratory Protection: None is necessary if used with adequate ventilation. Skin Protection: Wear protective gloves when possibility of contact exists.

Eye Protection: Use of protective eye goggles is recommended.

Protective Clothing: Use of protective clothing is recommended to avoid damage to regular clothing.

Permissible Exposure Limits: Not established.

SECTION IX PHYSICAL & CHEMICAL PROPERTIES

Appearance & Odor: Paste. Varies in color. Characteristic odor.

Specific Gravity: ≈1

Vapor Pressure: 11 millibars (hPA) / .16 psi

Flammability Limits % – Lower: 1.2; – Upper: 7.5

Autoflammability (°F): 698°F

Boiling Point (°F): 261°F

SECTION X — STABILITY & REACTIVITY

Stability: This material is stable under all conditions of use and storage.

Conditions to Avoid: None.

Materials to Avoid: None.

Hazardous Decomposition Products: Hydrogen.

SECTION XI — TOXICOLOGICAL INFORMATION

Acute Data: N/A.

Subchronic Data: N/A

Special Studies: N/A

SECTION XII ECOLOGICAL INFORMATION

Eco-toxicity: This product has not been tested for eco-toxicity potential.

Environmental Fate: The high pH of this material may be harmful to aquatic life. It does not contribute to BOD.

Physical/Chemical: Sinks into but does not mix with water.

SECTION XIII — DISPOSAL CONSIDERATIONS

Classification: Disposed material is not a hazardous waste.

Disposal Method: Dispose in accordance with federal, state and local regulations and permits.

SECTION XIV TRANSPORT INFORMATION

DOT UN Status: This material is not regarded as a hazardous material for transportation.

Land Transport (ADR): Not regulated.

Land Transport (RID): Not regulated.

Inland Waterway Transport (ADNR): Not regulated.

Ocean Transport (IMDG): Not regulated.

Air Transport (ICAO/IATA): Not regulated.

SECTION XV — REGULATORY INFORMATION

CERCLA: No CERCLA Reportable Quantity has been established for this material.

SARA Title III: Not regarded as an Extremely Hazardous Substance under §302. Not regarded as a Toxic Chemical under §313. Hazard categories under §311 and §312: Acute.

TSCA: All ingredients of this material are listed in the TSCA Inventory.

SECTION XVI OTHER INFORMATION

SDS Preparation Date: 2 February 2023

Formula Version Number: 1

Prepared By: AAI - JHO.

B L OC KH OUSE WARRANTY

Adhere America, Inc. warrants that this product will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with the recommendations of Adhere America, Inc. If this product fails to meet this warrant y, the liability of Adhere America, Inc. will be limited to replacement of any non-conforming material. Adhere America, Inc. may, at its sole discretion, refund the purchase price in lieu of replacing the material. Except for the expressed warranty stated above, no other warranties, expressed or implied, including without limitation, any implied of fitness for purpose, are included in this warrant y. Adhere America, Inc. shall have no liability or responsibility to the purchaser or any third party for any loss, cost, expense, damage or liabilit y, whether direct or indirect, or for incidental or consequential damages.