Choose Prime Vapor

A singlecomponent adhesive-based acrylic dispersion formulated to bond vapor-retarding sheets

Choose

PRIME VAPOR

— Single-component adhesive-based acrylic dispersion for bonding vapor-retarding sheets —

PRODUCT DESCRIPTION:

Prime Vapor delivers permanent, windproof bonding and sealing of joints. It works well when used to connect and butt-joint overlaps of vapor barriers, vapor-retarders and sealing sheets in dry construction. Prime Vapor gives rapid functional stability of bonded sheets on substrates such as stone, wood, plaster, concrete and various other materials. Prime Vapor can be used to seal joints and connections in new building and renovation projects without using clamping bars. It can also be used for permanent bonding in window and door installations.

BENEFITS:

• Optimized tooling properties

• Compatible with paints

• Long shelf life

• High initial & final tackiness

• Solvent-free

• Isocyantes-free

• Very low odor

• Silicone-free

• Resists aging

• Good adhesion on mineral substrates & vapor-retarding sheets

WHERE TO USE:

• Stone

• Wood

• Window & door installations

• Renovation projects

• Plaster

• Concrete

• Vapor barriers

• New construction

FOR MORE INFORMATION, CONTACT:

1712 6th Avenue, Suite 1042

Tacoma, Washington 98409–1910 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

E-mail: info@adhereamerica.com

Web: www.adhereamerica.com

“Best in class problem solvers”

©2023, Adhere America, Inc.

• Joints

Available Sizes:

310 ml tubes

400 ml sausages (special order)

600 ml sausages (special order)

5-gallon pails (special order)

55-gallon drums (special order)

Product Information Sheet – PRIME VAPOR – Revised 3

February 2023

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

ADHERE AMERICA, INC. PRIME VAPOR

Prime Vapor is a high-performance, single-component adhesive designed to bond vaporretarding sheets. Prime Vapor provides a permanent, wind-proof bonding of joints, connections, & butt-joint overlaps of vapor barriers, vapor retarders, & sealing sheets used in dry construction. Prime Vapor ensures rapid functional stability to bonded sheets on substrates such as stone, wood, plaster, concrete, & other materials. It can be used for sealing joints & connections in new construction & in renovation projects without using clamping bars. It can also be used for permanent & aging-resistant bonding of diffusion-resistant & diffusion-permeable sealing tapes in window & door installations. Like all products from Adhere America, Prime Vapor is a “Best in Class Problem Solver.”

SPECIAL PROPERTIES

❏ Optimized tooling properties

❏ High initial & final tackiness

❏ Very low odor

❏ Solvent-, isocyanate-, & silicone-free

❏ Tested by Fraunhofer Institut für Bauphysik; Prüfbericht P6-111/2011

❏ Compatible with paints in accordance with DIN 52452-4, A1 & A2

❏ Aging-resistant

❏ Long shelf life

❏ Good adhesion on mineral substrates & vapor-retarding sheets made of polyolefins

SINGLE-COMPONENT ADHESIVE-BASED ACRYLIC DISPERSION FOR BONDING VAPOR-RETARDING SHEETS

FIELDS OF APPLICATION

❏ For permanent, windproof bonding and sealing of joints, connections, and butt-joint overlaps of vapor barriers, vapor-retarders and sealing sheets in dry construction in accordance with the German law on energy saving (EnEV).

❏ Prime Vapor gives rapid functional stability of bonded sheets on substrates such as stone, wood, plaster, concrete, etc. & (given appropriate loop formation of the sheets to be bonded) can be used for joints & connections in new building & renovation projects without using clamping bars. It can also be used for permanent & aging-resistant bonding of diffusionresistant & diffusion-permeable sealing tapes in window & door installations.

❏ CAUTION: Prime Vapor must not be used in the sanitary sector, on marble or natural stone, in underground applications, on bituminous substrates, nor in joints in constant contact with moisture, e.g. concrete surfaces in contact with the soil.

YIELD

One 10.5 ounce tube (310 ml) of Prime Vapor is sufficient for completing about 23 feet (7 meters) when applying a .3 inch (8 mm) bead of adhesive.

COLORS & PACKAGING

Prime Vapor comes in one color, blue. It is available in 10.5 ounce (310 mm) cartridges, packed in cases of 20 tubes. Other sizes of packaging are available on special order basis.

APPLICATION INFORMATION

SUBSTRATE PRETREATMENT: The adhesive is applied as a bead with about a .3 inch (8 mm) diameter on the construction material or on the vapor barrier or vapor retarder itself. Both surfaces must be dry and free of dust and grease. The adhesive can also be used on absorbent, slightly-moist substrates. Less load-bearing substrates (such as porous concrete or gypsum board) should be pre-treated with a suitable primer. Subsequently, the sheet is attached to the construction material and fixed by slight pressing.

CLEANING: Fresh adhesive can be removed with a damp cloth. Clean tools with water immediately after use. Cured adhesive must be removed mechanically. Remaining residues can be softened with isopropanol and wiped off some time later.

IMPORTANT INFORMATION: Prime Vapor must be protected from leaching, e.g. by condensed moisture or rainwater, until a solid skin has formed. Fresh product may be removed

with a damp cloth. Clean tools with water immediately after use. Cured product must be removed mechanically. Remaining residues may be softened with water and then wiped off.

If applied outdoors, the joint must be protected from driving rain and constant exposure to moisture. Prime Vapor cures by means of desiccation. High humidity, low temperature and joint depth above 15 mm can delay skin formation and curing significantly. During drying, the color will slightly change.

Prime Vapor is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend own tests concerning compatibility and adhesion prior to application.

Joints subject to expansion must not be over-painted, since most paint systems will crack due to their lower elasticity (compared to the sealant). If joints with low movement are overpainted, Prime Vapor must be allowed to dry for at least seven days.

The function of the product can only be guaranteed if correctly applied in accordance with the technical recommendations given in this data sheet and in related standards. Sealant application in situations with strongly fluctuating temperatures (premature stressing of the sealant) should be avoided.

TECHNICAL DATA (METRIC)

Rate of curing depends on temperature, humidity and substrate absorbency.

ASTM 2202) ≤ 2 mm

Water vapor diffusion resistance (23o C, 50%=>0 %) μ = approximately 3500

sd = approximately 35 m (10mm thickness of sealant)

Application temperature (sealant & substrate) +5 to +35o C

Temperature stability (fully cured sealant)

to +80 o C

Shelf life (originally closed packaging) 15 months (+5 to 35o C), Protect from frost!

The data given refer to tests at standard conditions (73° F [23° C] / 50 percent relative humidity). Under these conditions, a 3⁄8 inch x 3⁄8 inch (10 mm x 10 mm) joint will cure in approximately 14 days (with at least one substrate being absorbent). Low temperature, high humidity and joint depth above 9⁄16 inches (15 mm) will retard skin formation and curing significantly.

Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specification purposes. For safety data, see Safety Data Sheet. Take all preventive measures specified in the Safety Data Sheet and in the hazard markings to prevent accidents and protect health.

WARRANTY

Adhere America warrants that at the time and place we make shipment, our material will be of good quality and will conform without published specifications in force on the date of acceptance of the order.

DISCLAIMER: The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable. Adhere America cannot, under any circumstances, make any guarantee of results or assume any obligation or liability in connection with the use of this information. As Adhere America has no control over the use to which others may put its products, it is recommended that the products be tested to determine if suitable for specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Specifier and user shall determine suitable products for specific application and assume all responsibilities in connection therewith.

Each new release of this product information sheet supersedes the previous one.

For more information about Prime Vapor, contact:

ADHERE AMERICA, INC.

“Best-in-Class Problem Solvers”

1712 6th Ave., Suite 1042

Tacoma, Washington 98409-7303 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

Email: info@adhereamerica.com

Web: www.adhereamerica.com

©2023, Adhere America, Inc.

ARE YOU A FAN OF HEAT?

If so, you’ll be a fan of Prime Vapor when you use it to seal the foil vapor barrier that protects your sauna.

THE MANY PLACES & MANY WAYS TO USE PRIME VAPOR

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary ability to block vapors from spreading.

STUCCO STRUCTURES

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

DECORATIVE LEDGES & BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

ETC., ETC., ETC.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. walls.

COMPARE THE BEST WITH THE BEST (GO AHEAD, WE DARE YOU!)

With its many matchless performance characteristics, Prime Vapor compares favorably with the most popular sealants on the market, each one of them frequently used in one or more similar applications as Prime Vapor. Indeed, in important ways it outperforms them.

Don’t believe it? Here’s proof.

If you click on the link below, you will be taken to a Comparison Chart pitting Prime Vapor against eight of the most popular sealants on the market, all well known, all top sellers in their own right.

We’ve lined those eight sealants up side by side with Prime Vapor with their physical and performance characteristics detailed line by line—63 lines in all. See for yourself. You’ll be amazed.

CLICK ON THE IMAGE ON THE LEFT TO VIEW AN ONLINE PDF VERSION OF THE PRIME MARBLE COMPARISON CHART.

TO TAPE OR NOT TO TAPE?

That is a question you may find yourself answering in the negative when you discover you can use Prime Vapor instead.

ADHERE AMERICA, INC.

PRIME VAPOR SAFETY DATA SHEET

SECTION I — SUPPLIER & PRODUCT INFORMATION

Product Identification: Prime Vapor

Product Class: Single component, solvent-based acrylic sealant and adhesive

Trade Name: Prime Vapor

DOT Shipping Name: N/A

Formula Version Number: 2

SDS Preparation Date: 3 September 2014

Most Recent SDS Revision Date: 3 February 2023

Supplier Name: Adhere America, Inc. d.b.a. Prime Sealants

Supplier Address: 1712 6th Ave., Suite 1042, Tacoma, Washington 98409-7303

USA

Supplier Telephone: +1 (206) 759.1901

Supplier Fax: +1 (844) 369.5351

Supplier Emergency 24-Hour Telephone: +1 (707) 362.4405

Supplier Website: www.adhereamerica.com

Recommended Use: Create airtight bonds in connecting joints and overlaps between roofs & walls

Restrictions on Use: None

SECTION II — COMPOSITION / INFORMATION ON INGREDIENTS

No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.

SECTION III — HAZARDS IDENTIFICATION

Emergency Overview: White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkalinity of product, release of product into surface water may be harmful to aquatic life. Non-combustible.

Eye Contact: Possible: Causes moderate irritation to the eyes.

Skin Contact: Possible: May cause mild irritation to the skin.

Inhalation: Possible: Only after prolonged exposure.

Ingestion: Possible: May cause irritation to mouth, esophagus & stomach.

SECTION IV — FIRST AID MEASURES

Contact with Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.

Contact with Skin: Immediately flush skin with plenty of water.

Inhalation: Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult.

Ingestion: If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — FIRE-FIGHTING MEASURES

Flash Point (°F): Non-combustible.

Flammable Limits: This material is non-combustible.

Extinguishing Media: This material is compatible with all extinguishing media.

Fire-fighting Equipment: The following protective equipment for fire fighters is recommended when this material is present in the area of a fire: chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION VI — ACCIDENTAL RELEASE MEASURES

Environmental Hazard: High pH (alkalinity) of undiluted or un-neutralized material.

Spillage: Sinks in but does not mix with water.

Waste Disposal Method: Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION VII — HANDLING & STORAGE

Handling: Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed. Storage: Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION VIII — EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation. Keep containers closed when not in use.

Respiratory Protection: None is necessary if used with adequate ventilation. Skin Protection: Wear protective gloves when possibility of contact exists.

Eye Protection: Use of protective eye goggles is recommended.

Protective Clothing: Use of protective clothing is recommended to avoid damage to regular clothing.

Permissible Exposure Limits: Not established.

SECTION IX — PHYSICAL & CHEMICAL PROPERTIES

Appearance & Odor: Paste. Varies in color. Characteristic odor.

Specific Gravity: ≈1

Vapor Pressure: 11 millibars (hPA) / .16 psi

Flammability Limits % – Lower: 1.2; – Upper: 7.5

Autoflammability (°F): 698°F

Boiling Point (°F): 261°F

SECTION X — STABILITY & REACTIVITY

Stability: This material is stable under all conditions of use and storage.

Conditions to Avoid: None.

Materials to Avoid: None.

Hazardous Decomposition Products: Hydrogen.

SECTION XI — TOXICOLOGICAL INFORMATION

Acute Data: N/A | Subchronic Data: N/A | Special Studies: N/A

SECTION XII — ECOLOGICAL INFORMATION

Eco-toxicity: This product has not been tested for eco-toxicity potential.

Environmental Fate: The high pH of this material may be harmful to aquatic life. It does not contribute to BOD.

Physical/Chemical: Sinks into—but does not mix with—water.

SECTION XIII — DISPOSAL CONSIDERATIONS

Classification: Disposed material is not a hazardous waste.

Disposal Method: Dispose in accordance with federal, state and local regulations and permits.

SECTION XIV — TRANSPORT INFORMATION

DOT UN Status: Not regarded as hazardous material for transportation.

Land Transport (ADR): Not regulated | Land Transport (RID): Not regulated. Inland Waterway Transport (ADNR): Not regulated.

Ocean Transport (IMDG): Not regulated. | Air Transport (ICAO/IATA): Not regulated.

SECTION XV — REGULATORY INFORMATION

CERCLA: No CERCLA Reportable Quantity exists for this material.

SARA Title III: Not regarded as Extremely Hazardous Substance under §302. Not regarded as Toxic Chemical under §313. Hazard categories under §311 & §312: Acute.

TSCA: All ingredients of this material are listed in the TSCA Inventory.

SECTION XVI — OTHER INFORMATION

SDS Preparation Date: 2 February 2023

Formula Version Number: 1

Prepared By: AAI - JHO.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

AFFIXING BATTENS

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet.

VAPOR WARRANTY

Adhere America, Inc. warrants that this product will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with the recommendations of Adhere America, Inc.If this product fails to meet this warranty, the liability of Adhere America, Inc. will be limited to replacement of any non-conforming material. Adhere America, Inc. may, at its sole discretion, refund the purchase price in lieu of replacing the material. Except for the expressed warranty stated above, no other warranties, expressed or implied, including without limitation, any implied of fitness for purpose, are included in this warranty. Adhere America, Inc. shall have no liability or responsibility to the purchaser or any third party for any loss, cost, expense, damage or liability, whether direct or indirect, or for incidental or consequential damages.