A high-performance, single-component, polyacrylic sealer ideal for roofing, negative-side repairs & other spplications.
— A high performance, single component, polyacrylic sealer ideal for roofing & negative side repairs —
PRIME ADHERE works in damp conditions where oil or water may be present and other sealants fail. Prime Adhere will grip to the surface and retain its hold. Prime Adhere’s specialized formulation makes it the perfect choice for sealing metal roofs and siding. Prime Adhere is designed to handle situations where movement and temperature variations are major factors. Prime Adhere is an excellent option for the permanent air-tight bonding of vapor barrier sheets used in roofing applications.
• Environmentally friendly • Low V.O.C. content (219 g/l)
• Weather resistant • Long-lasting • U.V. resistant
• Paintable one hour after application
• Adheres to non-porous & damp substrates
• Bitumen compatible • Contains no tuolene or other petroleum distillates.
• New & old concrete
• Most masonry surfaces
• Anodized aluminum
• Metal roofs
• Brickwork • Plaster • Gypsum • Hard PVC
• Heating & air conditioning ducts
• Metal siding
• RVs
• Manufactured homes
for more information, contact:
1712 6th Avenue, Suite 1042
Tacoma, Washington 98409–1910 USA
Phone: +1 (206) 759.1910
Fax: +1 (844) 369.5351
E-mail: info@adhereamerica.com
Web: www.adhereamerica.com
©2023, Adhere America, Inc., All Rights Reserved
• Flashings
• Plastic pipes
Available Sizes:
310 ml tubes
400 ml sausages (special order)
600 ml sausages (special order)
5-gallon pails (special order)
55-gallon drums (special order)
Product Information Sheet – PRIME ADHERE – Revised 17 February 2023
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Seal problem roofs and gutters and siding with Prime Adhere and relax. Your worries are over. The seal will last. Enjoy peace of mind, knowing the sealt will last. Prime Adhere is specially designed to be used in demanding applications where dampness, movement & temperature are major factors. Where other sealants fail to do the job, Prime Adhere grabs the surface and sticks and keeps on sticking. Prime Adhere delivers outstanding adhesion performance even in humid substrates where oil and gas may be present. Like all products from Adhere America, Prime Adhere is a “Best in Class Problem Solver.”
❑ Bitumen compatible
❑ Environmentally friendly, free of isocyanate & silicone
❑ Compatible with paints in accordance with DIN 52452-4, A1 & A2
❑ Weather- & aging-resistant
❑ Good UV resistance
❑ Long shelf-life
❑ Perfect for permanent air-tight bonding of vapor barrier sheets in roofing applications
❑ Seals to almost all substrates, even on non-porous, humid, damp substrates
❑ Available in 3 colors: Clear, White and Black.
❑ Paintable within 1 hour
STICKS TO DAMP & OILY SURFACES WHERE OTHER SEALANTS FAILPrime Adhere creates a permanent air-tight bond in connecting joints and overlaps between roofs and walls that experience moderate movement stress. It is especially effective when used on:
❑ Concrete
❑ Masonry
❑ Brickwork
❑ Gypsum
❑ Wood
❑ Anodized Aluminum
❑ Plywood
❑ Hard PVC
Other applications where Prime Adhere may be used include but are not limited to:
❑ Sealing & Jointing
❑ Roofing Felts
❑ Joints around Doors
❑ Joints around Dormer Windows
❑ Door Jams
❑ Vents
❑ Gutters
❑ Siding
❑ Roofs
❑ Flashing
❑ Plastic Pipes
❑ Heating & Air Conditioning Ducts
❑ Problem surfaces like:
❑ Galvanized Metal
❑ Plaster
❑ Gypsum
Prime Adhere is ideal for use in the Marine Industry, including in the sealing of:
❑ Portholes
❑ Seams
❑ Instrument panels
❑ Deck hardware
❑ Transoms
❑ Cleats
NOTE: Prime Adhere must not be used under any circumstances in the sanitary sector or on marble or natural stone. It also must not be used in high-traffic areas or in exposed areas where the sealant will be visible to the naked eye as it will attract unsightly dirt and dust.
One 10.5 ounce tube (310 ml) of Prime Adhere is sufficient for completing about 31.5 feet (9.6 meters) of joints measuring 1⁄4" × 1⁄4" (6.25 mm x 6.25 mm) or about 7 1⁄2 feet (2.25 meters) of joints measuring 1⁄2" × 1⁄2" (12.7 mm × 12.7 mm).
Prime Adhere comes in three colors: Clear, White and Black. Prime Adhere is available in 10.5 ounce (310 ml) cartridges, packed in cases of 20 tubes. Other sizes of packaging are available by request on a special order basis.
SUBSTRATE PRETREATMENT: The substrate must be firm and free of dust and grease. Before applying Prime Adhere, remove all cement slurry, mold release agents and impregnations. In renovation projects, old sealants and remains of paint and loose material must be fully removed. The joint must always be provided with a suitable, correctly dimensioned joint backing, such as, for example, PE cord or PE sheeting, to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before applying a primer and filling the joint with Prime Adhere.
JOINT DIMENSIONS: For joint widths of a minimum of .2" (5 mm), a square cross-section is advised. For wider joints (up to 1.5" [38 mm] maximum), the ideal joint depth should be equal to half the joint width in accordance with DIN 18540, Sheet 3. Make sure that triangular bevels have uniform sides of equal length with at least 1⁄4" (7 mm) of bonding surface.
SMOOTHING: After applying Prime Adhere with a suitable hand-operated, battery-powered or pneumatic caulking gun, Prime Adhere can be smoothed in the joint with water or with a neutral, non-staining water-based smoothing agent and a suitable tool (e.g. a jointing trowel). Any adhesive tape used can be removed immediately after smoothing.
CLEANING: Fresh adhesive can be removed with a damp cloth. Clean tools with water immediately after use. Cured adhesive must be removed mechanically. Remaining residues can be softened with isopropanol and wiped off some time later.
IMPORTANT INFORMATION: Clean tools with solvent immediately after use. Cured Prime Adhere must be removed mechanically. Remaining residues can be softened with solvent and wiped off some time later. The product cures by means of drying. High humidity, low temperature and joint depth above 9⁄16" (15 mm) can delay skin formation and curing significantly. During drying, the color will slightly change.
This product is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend that you conduct your own tests
concerning compatibility and adhesion prior to application. Joints subject to expansion must not be painted over, since most paint systems will crack due to their lower elasticity when compared to Prime Adhere. If joints with low movement are painted over, Prime Adhere must be allowed to dry for at least seven days before the paint is applied.
The function of the product can only be guaranteed if correctly applied in accordance with the technical recommendations given in this data sheet and related standards. Application in situations with strongly fluctuating temperatures that may cause premature stressing should be avoided.
C
Shelf life (originally closed packaging) 24 months (stored at +5o C to +35o C)
Rate of curing depends on temperature, humidity and substrate absorbency. The data given refer to tests at standard conditions (73° F [23° C] / 50 percent relative humidity). Low temperature, high humidity and joint depth above 9⁄16" (15 mm) will retard skin formation and curing significantly.
Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specification purposes.
For safety data, see Safety Data Sheet. Take all preventive measures specified in the Safety Data Sheet and in the hazard markings to prevent accidents and protect health.
Information provided in this data sheet is based on the current state of knowledge. This does not exempt purchasers from carrying out their own careful inspections of incoming goods in individual cases. We reserve the right to make changes to the product data in the course of technical progress or due to operationally-related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by customers. Our recommendations do not exempt customers from the obligation to check any infringements of third-party rights themselves and eliminate them if necessary. The suggestions made herein for product use are not equivalent to a warranty of its suitability for the recommended purpose.
Each new release of this product information sheet supersedes the previous one.
For more information about Prime Adhere, contact:
Tacoma, Washington 98409-7303 USA
Phone: +1 (206) 759.1910
Fax: +1 (844) 369.5351
Email: info@adhereamerica.com
Web: www.adhereamerica.com
©2023, Adhere America, Inc.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. walls.
With its many matchless performance characteristics, Prime Adhere compares favorably with the most popular sealants on the market, each one of them frequently used in one or more similar applications as Prime Adhere. Indeed, in important ways it outperforms them.
Don’t believe it? Here’s proof.
If you click on the link below, you will be taken to a Comparison Chart pitting Prime Adhere against eight of the most popular sealants on the market, all well known, all top sellers in their own right.
We’ve lined those eight sealants up side by side with Prime Adhere with their physical and performance characteristics detailed line by line—63 lines in all. See for yourself. You’ll be amazed.
Prime Adhere
1. SEAL IT ONCE AND FORGET IT. Ta ke Prime Adhere, use it to seal your roof, siding or gutter job and then relax. Your task is finished. The seal will last. The bond will not break. The flexibility will not be lost. You needn’t worry any further. Enjoy peace of mind, secure in the knowledge the job’s well done.
2. IT’S RAINING OUTSIDE, YOU SAY? NO PROBLEM. Prime Adhere sticks to damp and oily surfaces where other sealants fail. You can apply it when it’s raining and it still seals the job. You no longer have to depend on sealants that can be applied only when the weather decides to cooperate. Fair weather or foul, Prime Adhere does the job.
3.WORRIES ABOUT TEMPERATURE CHANGES ARE A THING OF THE PAST. Prime Adhere is specially designed for use in demanding applications where movement and temperature are major factors. As you know all too well, metal roofs expand and contract as temperatures rise and fall. Sooner or later, lesser sealants fail when faced with such conditions, but not Prime Adhere. Prime Adhere never loses its flexibility or its ability to heal itself. It stretches with the heat, contracts with the cold, and always heals itself, keeping your seal intact.
Give Prime Adhere a try. You’ll be glad you did.
Product Identification: Prime Vapor
Product Class: Single component, solvent-based acrylic sealant and adhesive
Trade Name: Prime Vapor
DOT Shipping Name: N/A
Formula Version Number: 2
SDS Preparation Date: 3 September 2014
Most Recent SDS Revision Date: 3 February 2023
Supplier Name: Adhere America, Inc. d.b.a. Prime Sealants
Supplier Address: 1712 6th Ave., Suite 1042, Tacoma, Washington 98409-7303
USA
Supplier Telephone: +1 (206) 759.1901
Supplier Fax: +1 (844) 369.5351
Supplier Emergency 24-Hour Telephone: +1 (707) 362.4405
Supplier Website: www.adhereamerica.com
Recommended Use: Create airtight bonds in connecting joints and overlaps between roofs & walls
Restrictions on Use: None
No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.
Emergency Overview: White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkalinity of product, release of product into surface water may be harmful to aquatic life. Non-combustible.
Eye Contact: Possible: Causes moderate irritation to the eyes.
Skin Contact: Possible: May cause mild irritation to the skin.
Inhalation: Possible: Only after prolonged exposure.
Ingestion: Possible: May cause irritation to mouth, esophagus & stomach.
Contact with Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.
Contact with Skin: Immediately flush skin with plenty of water.
Inhalation: Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult.
Ingestion: If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.
Flash Point (°F): Non-combustible.
Flammable Limits: This material is non-combustible.
Extinguishing Media: This material is compatible with all extinguishing media.
Fire-fighting Equipment: The following protective equipment for fire fighters is recommended when this material is present in the area of a fire: chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.
Environmental Hazard: High pH (alkalinity) of undiluted or un-neutralized material.
Spillage: Sinks in but does not mix with water.
Waste Disposal Method: Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.
Handling: Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed. Storage: Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.
Engineering Controls: Use with adequate ventilation. Keep containers closed when not in use.
Respiratory Protection: None is necessary if used with adequate ventilation. Skin Protection: Wear protective gloves when possibility of contact exists.
Eye Protection: Use of protective eye goggles is recommended. Protective Clothing: Use of protective clothing is recommended to avoid damage to regular clothing.
Permissible Exposure Limits: Not established.
Appearance & Odor: Paste. Varies in color. Characteristic odor.
Specific Gravity: ≈1
Vapor Pressure: 11 millibars (hPA) / .16 psi
Flammability Limits % – Lower: 1.2; – Upper: 7.5
Autoflammability (°F): 698°F
Boiling Point (°F): 261°F
Stability: This material is stable under all conditions of use and storage.
Conditions to Avoid: None.
Materials to Avoid: None.
Hazardous Decomposition Products: Hydrogen.
Acute Data: N/A | Subchronic Data: N/A | Special Studies: N/A
Eco-toxicity: This product has not been tested for eco-toxicity potential.
Environmental Fate: The high pH of this material may be harmful to aquatic life. It does not contribute to BOD.
Physical/Chemical: Sinks into—but does not mix with—water.
Classification: Disposed material is not a hazardous waste.
Disposal Method: Dispose in accordance with federal, state and local regulations and permits.
DOT UN Status: Not regarded as hazardous material for transportation.
Land Transport (ADR): Not regulated | Land Transport (RID): Not regulated.
Inland Waterway Transport (ADNR): Not regulated.
Ocean Transport (IMDG): Not regulated. | Air Transport (ICAO/IATA): Not regulated.
CERCLA: No CERCLA Reportable Quantity exists for this material.
SARA Title III: Not regarded as Extremely Hazardous Substance under §302. Not regarded as Toxic Chemical under §313. Hazard categories under §311 & §312: Acute.
TSCA: All ingredients of this material are listed in the TSCA Inventory.
SDS Preparation Date: 2 February 2023
Formula Version Number: 1
Prepared By: AAI - JHO.
Adhere America, Inc. warrants that this product will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed, and applied in accordance with the recommendations of Adhere America, Inc. If this product fails to meet this warranty, the liability of Adhere America, Inc. will be limited to replacement of any non-conforming material. Adhere America, Inc. may, at its sole discretion, refund the purchase price in lieu of replacing the material. Except for the expressed warranty stated above, no other warranties, expressed or implied, including without limitation, any implied of fitness for purpose, are included in this warranty. Adhere America, Inc. shall have no liability or responsibility to the purchaser or any third party for any loss, cost, expense, damage or liability, whether direct or indirect, or for incidental or consequential damages.
