Choose Prime Bond!

A special adhesive with high initial contact strength, making it your clear choice for mounting heavy objects such as GRC panels

Choose

PRIME BOND

PRIMEBOND

PRIME BOND

— DELIVERS INSTANT GRIPPING STRENGTH WHEN YOU NEED IT

— DELIVERS INSTANT GRIPPING STRENGTH WHEN YOU NEED IT —

DIRECTIONS: The substrate must be dry, firm and free of dust and grease. At least one of the surfaces to be bonded must be absorbent or diffusion-permeable. CAUTION: Do not use on marble or on natural stone of any kind. For important information on the proper application of Prime Bond, please consult the Technical Data Sheet for Prime Bond that may be found on our website, www.adhereamerica.com.

DIRECTIONS: The substrate must be dry, firm and free of dust and grease. At least one of the surfaces to be bonded must be absorbent or diffusion-permeable. CAUTION: Do not use on marble or on natural stone of any kind. For important information on the proper application of Prime Bond, please consult the Technical Data Sheet for Prime Bond that may be found on our website, www.primesealants.com.

Prime Bond is a singlecomponent acrylate construction adhesive specially designed to deliver a high initial tack of up to 25 pounds per square foot. Prime Bond is strong enough to tackle the toughest jobs, like fastening heavy GRC components. Prime Bond is ideal for fixing, assembling and fastening decorative panels, for bonding insulating boards and panels, for building with wood components, for repairing defects in wood walls and much more. Like all Adhere America products, Prime Bond is a “Best in Class Problem Solver.”©

Prime Bond is a singlecomponent acrylate construction adhesive specially designed to deliver a high initial tack of up to 25 pounds per square foot. Prime Bond is strong enough to tackle the toughest jobs, like fastening heavy GRC components. Prime Bond is ideal for fixing, assembling and fastening decorative panels, for bonding insulating boards and panels, for building with wood components, for repairing defects in wood walls and much more. Like all Prime products, Prime Bond is a “Best in Class Problem Solver.”©

For SDSs & Technical Data Sheets visit: www.adhereamerica.com

For SDSs & Technical Data Sheets visit: www.primesealants.com

For technical support, visit: www.adhereamerica.com.

For technical support, visit: www.primesealants.com.

• High initial tack; high final strength

• High initial tack; high final strength

• Weather resistant

• Weather resistant

• Good UV resistance

• Good UV resistance

• Good aging resistance

• Good aging resistance

• Fast curing

• Fast curing

• Long shelf life

• Long shelf life

• Compatible with paints

• Compatible with paints

• Solvent- & isocyanate-free

• Solvent- & isocyanate-free

• Wood construction

• Wood construction

• GRC panels

• GRC panels

• Decorative & socket ledges

• Decorative & socket ledges

• Insulating boards & panels

• Insulating boards & panels

• Gypsum

• Gypsum

• Battens & profiles

• Battens & profiles

• Stucco structures

• Stucco structures

• Baseboards

• Baseboards

• Polystyrene panels & decorations

• Polystyrene panels & decorations

Skin Forming Time: Approximately 5 minutes

Skin Forming Time: Approximately 5 minutes

Slump:

≤.08" (2 mm)

Slump: ≤.08" (2 mm)

Shore A Hardness

(DIN 53505, 28 d): 65±6 units

Shore A Hardness (DIN 53505, 28 d): 65±6 units

Tensile Modulus (DIN EN ISO 8339-1, 100%): Approximately 0.2 N/mm2

Tensile Modulus (DIN EN ISO 8339-1, 100%): Approximately 0.2 N/mm2

— COVERAGE RATE – ONE CARTRIDGE —

— COVERAGE RATE – ONE CARTRIDGE —

One 10.5 oz (310 ml) tube of Prime Bond is sufficient for about 39.4' (12 m) of joints measuring .2" x .2" (5 mm x 5 mm) or about 10' (3 m) of joints measuring .4" x .4" (10 mm x 10 mm). The thickness of the adhesive layer should be at least ⅛" (3 mm) and not exceed ⅓" (8 mm). For complete application information, consult the Technical Data Sheet for Prime Bond found at www.adhereamerica.com.

One 10.5 oz (310 ml) tube of Prime Bond is sufficient for about 39.4' (12 m) of joints measuring .2" x .2" (5 mm x 5 mm) or about 10' (3 m) of joints measuring .4" x .4" (10 mm x 10 mm). The thickness of the adhesive layer should be at least ⅛" (3 mm) and not exceed ⅓" (8 mm). For complete application information, consult the Technical Data Sheet for Prime Bond found at www.primesealants.com.

Application Temperature: +41o F to +95o F

(+5o C to +35o C)

Application Temperature: +41o F to +95o F (+5o C to +35o C)

Temperature Stability: -13o F to +166o F

(-25o C to +80o C)

Temperature Stability: -13o F to +166o F (-25o C to +80o C)

Shelf Life (unopened): 18 months Protect from frost!

Shelf Life (unopened): 18 months Protect from frost!

— “Best-in-Class Problem Solvers”© —

— “Best in Class Problem Solvers”© —

ADHERE AMERICA, INC.

1712 6th Ave., Suite 1042

Tacoma, Washington 98409-7303 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

E-mail: info@adhereamerica.com

— WARRANTY —

For warranty information, visit: www.adhereamerica.com.

For warranty information, visit: www.primesealants.com.

©2023 ADHERE AMERICA, INC.

©2015 VJ VENTURES, INC. All Rights Reserved. 310 ml / 10.5 oz

All Rights Reserved. 310 ml / 10.5 oz

Web: www.adhereamerica.com

— PRIME BOND —

— PRIME BOND

PRIME  BOND

— A special construction adhesive with high initial contact strength, making it your clear choice for — mounting heavy items such as GRC panels. —

PRODUCT DESCRIPTION:

Prime Bond is a single-component acrylate adhesive with a high initial tack of up to 25 pounds per square foot. Prime Bond is ideal for fixing, assembling and fastening decorative panels, bonding insulating boards and panels, building with wood components and repairing defects in wood walls.

BENEFITS:

• High initial tack

• U.V. resistant

• Fast curing

• Long shelf life

• Compatible with paints

WHERE TO USE:

• Wood construction

• Battens

• Profiles

• GRC panels

• Weather resistant

• Solvent-, isocyanates-, & silicone-free

• Decorative ledges

• Stucco structures

• Baseboards

• Long-lasting

• Easy to apply

• Insulating panels

• Gypsum

• Polystyrene panels & decorations

for more information, contact us at:

1712 6th Avenue, Suite 1042

Tacoma, Washington 98409–1910 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

E-mail: info@adhereamerica.com

Web: www.adhereamerica.com

©2023, Adhere America, Inc. Product Information Sheet

Available Sizes:

310 ml tubes

400 ml sausages (special order)

600 ml sausages (special order)

5-gallon pails (special order)

55-gallon drums (special order)

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

AFFIXING BATTENS

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

ADHERE AMERICA, INC. PRIME BOND

STRONG ENOUGH TO HANDLE THE TOUGHEST JOBS

PRIME BOND is a single-component gunnable adhesive with a high initial tack of up to 25 pounds per square foot and a fast-setting curing system based on acrylic dispersion. Prime Bond’s superior initial contact strength makes it your clear choice for mounting heavy items such as GRC panels.

SPECIAL PROPERTIES

❑ Low odor

❑ Solvent-, Isocyanate-, & Silicone-free

❑ Weather-resistant & aging-resistant

❑ Good UV resistance

FIELDS OF APPLICATION

❑ Fixing, assembling & fastening decorative & socket ledges

❑ Bonding insulating boards & panels

❑ Bonding wood constructions

❑ Repairing defects in wood walls.

❑ Bonding battens

❑ Long shelf life

❑ High initial tack & final strength

❑ Fast curing

❑ Bonding profile boards

❑ Stucco structures

❑ Baseboards

❑ Polystyrene boards

❑ Polystyrene decorations

NOTE: Prime Bond must not be used in the sanitary sector, on marble or on natural stone of any kind. Neither must it be used in underground applications, on bituminous substrates, on substrates containing tar or on substrates that release plasticizers. Do not use Prime Bond on untreated (unprimed) metal substrates or for joints that have ongoing contact with moisture, such as concrete surfaces that are in contact with the soil.s

YIELD

One 10.5 ounce (310 ml) tube of Prime Bond is sufficient for about 42 running feet (13 meters) of joints measuring .2 inch x .2 inch (5 mm x 5 mm) or about 10 running feet (3 meters) of joints measuring .4 inch x .4 inch (10 mm x 10 mm).

COLORS & PACKAGING

Prime Bond is available in 10.5 ounce (310 ml) tubes in white. The tubes are packaged 20 to a case. Additional colors and packaging sizes are available on a special-order basis.

APPLICATION INFORMATION

SUBSTRATE PRETREATMENT: The substrate must be dry, firm, and free of dust and grease (clean with isopropanol, if necessary). Porous substrates (e.g. concrete, plasterboard, untreated wood) must be pretreated with diluted sealant (1 to 4 parts of water added to one part of sealant; = primer). Before primer application, remove any cement slurry, mold release agents or impregnations. In renovation projects, old sealant, remains of paint and loose material must be fully removed.

The joint must always be provided with a suitable, correctly dimensioned backing (e.g. PE cord, mineral wool) to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before primer application and filling.

JOINT DIMENSIONS: Joint dimensions should be at least 5 mm x 5 mm for indoor and 10 mm x 8 mm (width x depth) for outdoor applications. With increasing joint width (up to 30 mm), joint depth should be roughly half the joint width. Make sure that triangular bevels have uniform sides of equal length with at least 7 mm bonding surface on each side.

APPLICATION: The substrate must be dry, firm and free of dust and grease. At least one of the surfaces to be bonded must be absorbent or diffusion-permeable. Very porous, highly absorbing substrates, such as porous concrete, should be pretreated with diluted adhesive. We recommend a water-to-adhesive ratio of between 1:3 and 1:4 for any primer application.

To avoid contamination, we recommend masking the joint edges with adhesive tape before applying Prime Bond.

JOINT DIMENSIONS: The thickness of the adhesive layer should be at least ⅛ inch (3 mm), and should not exceed ⅓ inch (8 mm).

BONDING: Bonding takes place immediately after straight or curved application of the adhesive using a suitable manual, battery-powered or pneumatic caulking gun. When bonding takes place after a skin has formed, the surfaces to be bonded must be displaced relative to each other so as to break the skin. Bonding will normally be completed after a maximum of 15 minutes following application of the adhesive. Corrections are still possible after a short period of time.

Depending on the bond thickness, heavyweight parts may require additional securing until the initial strength is reached, normally in about 24 hours.

If adhesive tape is used, it can be removed immediately after bonding.

IMPORTANT INFORMATION: Prime Bond must be protected from leaching, such as that caused by condensed moisture or rainwater, until a solid skin has formed. Fresh product may be removed with a damp cloth. Clean tools with water immediately after use. Cured product must be removed mechanically. Remaining residues may be softened with water and then wiped off.

If applied outdoors, the joint must be protected from driving rain and constant exposure to moisture.

The product cures by means of desiccation. High humidity, low temperature and joint depth above .6 inches (15 mm) can delay skin formation and curing significantly. During drying, the color will slightly change.

The product is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend you conduct your own tests concerning compatibility and adhesion prior to application.

The function of the product can be guaranteed only if the product has been correctly applied in accordance with the technical recommendations given in this data sheet and in

related standards. Sealant application in situations with strongly fluctuating temperatures that may cause premature stressing of the sealant should be avoided.

TECHNICAL DATA (METRIC)

Density (DIN EN ISO 2811-1) 1.30 ± 0.04 g/cm3

Skin Forming Time (23 o C/50 o F / 50% relative humidity) Approximately 5 minutes

Penetration (DIN 51579/5 seconds) 140 ± 30 1/10 mm

Slump (in accordance with ASTM 2202) ≤2mm

Shore A Hardness (DIN 53505, 28 d) 65± 6 units

Tensile Modulus (DIN EN ISO 8339-A, 100%) Approximately 0.2 N/mm2

Maximum Movement Tolerance 0%

Mass Loss (DIN EN ISO 10563)

Water vapor diffusion resistance (23 o C, 50%=>0 %)

Application temperature (sealant & substrate)

Temperature stability (fully cured sealant)

Shelf life (originally closed packaging)

Maximum 35%

μ=approximately 3500 | sd=approximately 35 m (10 mm thickness of sealant)

The rate of curing depends on temperature, humidity and substrate absorbency. The data given above refer to tests conducted under standard conditions (73°F / 50% relative humidity). Under these conditions, a .4 inch x .4 inch (10 mm x 10 mm) joint will cure in approximately 14 days (with at least one substrate being absorbent). Low temperature, high humidity and joint depth above 9⁄16 inches (15 mm) will retard skin formation and curing significantly.

Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specification purposes.

FOR

SAFETY DATA,

SEE SAFETY DATA SHEET. Take all preventive measures specified in the Safety Data Sheet and in the hazard markings to prevent accidents and protect health.

Information provided in this data sheet is based on the current state of knowledge. This does not exempt purchasers from carrying out their own careful inspections of incoming goods in individual cases. We reserve the right to make changes to the product data in the course of technical progress or due to operationally-related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by customers. Our recommendations do not exempt customers from the obligation to check any infringements of third-party rights themselves and eliminate them if necessary.

The suggestions made herein for product use are not equivalent to a warranty of its suitability for the recommended purpose.

Each new release of this data sheet supersedes the previous one.

For more information on Prime Bond , contact:

“Best-in-Class

Problem Solvers”

ADHERE AMERICA, INC.

1712 6th Ave., Suite 1042

Tacoma, Washington 98409-7303 USA

Phone: +1 (206) 759.1910

Fax: +1 (844) 369.5351

Email: info@adhereamerica.com

Web: www.adhereamerica.com

©2023, Adhere America, Inc.

THE MANY PLACES & MANY WAYS TO USE PRIME BOND

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary bonding strength.

STUCCO STRUCTURES

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary bonding strength.

DECORATIVE LEDGES & BATTENS

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary bonding strength.

ETC., ETC., ETC.

Typical of sealants from Adhere America, Prime Bond has multiple uses in many places that extend well beyond its primary area of strength embodied in its name—its extraordinary bonding strength.

COMPARE THE BEST WITH THE BEST (GO AHEAD, WE DARE YOU!)

With its many matchless performance characteristics, Prime Bond compares favorably with the most popular sealants on the market, each one of them frequently used in one or more similar applications as Prime Bond. Indeed, in important ways it outperforms them.

Don’t believe it? Here’s proof.

If you click on the link below, you will be taken to a Comparison Chart pitting Prime Bond against eight of the most popular sealants on the market, all well known, all top sellers in their own right.

We’ve lined those eight sealants up side by side with Prime Bond with their physical and performance characteristics detailed line by line—63 lines in all. See for yourself. You’ll be amazed.

Prime Bond

ADHERE AMERICA, INC.

PRIME BOND SAFETY DATA SHEET

SECTION I — SUPPLIER & PRODUCT INFORMATION

Product Identification: Prime Bond

Product Class: Single component, solvent-based acrylic sealant and adhesive

Trade Name: Prime Bond

DOT Shipping Name: N/A

SDS Preparation Date: 3 September 2014

Most Recent SDS Revision Date: 17 February 2023

Supplier Name: Adhere America, Inc. d.b.a. Prime Sealants

Supplier Address: 1712 6th Ave., Suite 1042, Tacoma, Washington 98409-7303

USA

Supplier Telephone: +1 (206) 759.1901

Supplier Fax: +1 (844) 369.5351

Supplier Emergency 24-Hour Telephone: +1 (707) 362.4405

Supplier Website: www.adhereamerica.com

Recommended Use: Create airtight bonds in connecting joints and overlaps between roofs and walls

Restrictions on Use: None

SECTION II — COMPOSITION / INFORMATION ON INGREDIENTS

No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.

SECTION III — HAZARDS IDENTIFICATION

Emergency Overview: White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkalinity of product, release of product into surface water may be harmful to aquatic life. Non-combustible.

Eye Contact: Possible: Causes moderate irritation to the eyes.

Skin Contact: Possible: May cause mild irritation to the skin.

Inhalation: Possible: Only after prolonged exposure.

Ingestion: Possible: May cause irritation to mouth, esophagus & stomach.

SECTION IV — FIRST AID MEASURES

Contact with Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.

Contact with Skin: Immediately flush skin with plenty of water.

Inhalation: Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult.

Ingestion: If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — FIRE-FIGHTING MEASURES

Flash Point (°F): Non-combustible.

Flammable Limits: This material is non-combustible.

Extinguishing Media: This material is compatible with all extinguishing media.

Fire-fighting Equipment: The following protective equipment for fire fighters is recommended when this material is present in the area of a fire: chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION VI — ACCIDENTAL RELEASE MEASURES

Environmental Hazard: High pH (alkalinity) of undiluted or un-neutralized material. Spillage: Sinks in but does not mix with water.

Waste Disposal Method: Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION VII — HANDLING & STORAGE

Handling: Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed. Storage: Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION VIII — EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Controls: Use with adequate ventilation. Keep containers closed when not in use.

Respiratory Protection: None is necessary if used with adequate ventilation. Skin Protection: Wear protective gloves when possibility of contact exists.

Eye Protection: Use of protective eye goggles is recommended.

Protective Clothing: Use of protective clothing is recommended to avoid damage to regular clothing.

Permissible Exposure Limits: Not established.

SECTION IX — PHYSICAL & CHEMICAL PROPERTIES

Appearance & Odor: Paste. Varies in color. Characteristic odor.

Specific Gravity: ≈1

Vapor Pressure: 11 millibars (hPA) / .16 psi

Flammability Limits % – Lower: 1.2; – Upper: 7.5

Autoflammability (°F): 698°F

Boiling Point (°F): 261°F

SECTION X — STABILITY & REACTIVITY

Stability: This material is stable under all conditions of use and storage.

Conditions to Avoid: None.

Materials to Avoid: None.

Hazardous Decomposition Products: Hydrogen.

SECTION XI — TOXICOLOGICAL INFORMATION

Acute Data: N/A.

Subchronic Data: N/A

Special Studies: N/A

SECTION XII — ECOLOGICAL INFORMATION

Eco-toxicity: This product has not been tested for eco-toxicity potential.

Environmental Fate: The high pH of this material may be harmful to aquatic life. It does not contribute to BOD.

Physical/Chemical: Sinks into but does not mix with water.

SECTION XIII — DISPOSAL CONSIDERATIONS

Classification: Disposed material is not a hazardous waste.

Disposal Method: Dispose in accordance with federal, state and local regulations and permits.

SECTION XIV — TRANSPORT INFORMATION

DOT UN Status: This material is not regarded as a hazardous material for transportation.

Land Transport (ADR): Not regulated.

Land Transport (RID): Not regulated.

Inland Waterway Transport (ADNR): Not regulated.

Ocean Transport (IMDG): Not regulated.

Air Transport (ICAO/IATA): Not regulated.

SECTION XV — REGULATORY INFORMATION

CERCLA: No CERCLA Reportable Quantity has been established for this material.

SARA Title III: Not regarded as an Extremely Hazardous Substance under §302. Not regarded as a Toxic Chemical under §313. Hazard categories under §311 and §312: Acute.

TSCA: All ingredients of this material are listed in the TSCA Inventory.

SECTION XVI — OTHER INFORMATION

SDS Preparation Date: 17 February 2023

Formula Version Number: 1

Prepared By: AAI - JHO.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididun.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

AFFIXING BATTENS

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididun.

BOND WARRANTY

Adhere America, Inc. warrants that this product will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with the recommendations of Adhere America, Inc. If this product fails to meet this warrant y, the liability of Adhere America, Inc. will be limited to replacement of any non-conforming material. Adhere America, Inc. may, at its sole discretion, refund the purchase price in lieu of replacing the material. Except for the expressed warranty stated above, no other warranties, expressed or implied, including without limitation, any implied of fitness for purpose, are included in this warrant y. Adhere America, Inc. shall have no liability or responsibility to the purchaser or any third party for any loss, cost, expense, damage or liabilit y, whether direct or indirect, or for incidental or consequential damages.