How To Wash Your Car the Proper Way

Page 1

==== ==== How To Maintain Your Car. Click on the link Below http://cardetailingphoenix.com/blog ==== ====

Washing a car without the proper techniques will cause swirls and scratches on the paint. Required

2 Wash Buckets 2 Grit Guard Inserts Quality Wash Mitt Sponge or separate mitt for wheels Car Wash Soap (not dish soap!) Wheel Cleaning Brush Sonax Wheel Cleaner Waffle Weave Microfiber Drying Towel Plush Microfiber Towel Spray Wax We will start by cleaning the wheels first. Use a hose and spray the wheels down to loosen brake dust and dirt. Spray the wheels with wheel cleaner. In this article we are using Sonax Xtreme Wheel Cleaner Full Effect, an acid free, pH neutral wheel cleaner which is safe and powerful even for the filthiest wheels. Agitate the inner wheel barrels with a brush such as the EZ Detail Brush. Clean the face of the wheel with a sponge or a dedicated mitt for wheel cleaning. Clean the lug nuts. Rinse it thoroughly and repeat for the other wheels. Hose the entire car down to loosen dirt and debris. Place a Grit Guard Insert into each bucket. Fill 1 bucket with soap and the other with plain water. If you want lots of suds you can squeeze some soap onto the mitt and spray it with a sharp stream of water. Wash in straight lines and never circular motions. Clean the car starting from the top in this order: top, hood, side panels, trunk, front bumper, rear bumper, side skirts. We want to leave the rear bumper and the bottom quarter of the car last so that the mitt remains clean while washing the cleaner parts of the vehicle. After every small panel, rinse the car with the hose and dip the mitt into the rinse bucket and rub both sides of the mitt against the Grit Guard to release dirt. The Grit Guard has 4 quadrants which calm the water so that dirt that settles to the bottom of the bucket do not get disturbed and remains separated from the mitt. Each time the mitt is wiped against the Grit Guard, the fluffed up fibers allow dirt particles to be extracted. Change out the rinse water if it gets too dirty. Your soap bucket should remain clean because of this 2 bucket method. Saving your paint from any potential marring. Rinse the entire car after washing. Place the mitt onto the Grit Guard and rinse it off. Dry the car with a soft Microfiber Waffle Weave Drying Towel. Finish up with a spray wax, such as 1Z Einszett Spray Wax, for one


step shine and protection. Use in addition to your primary car wax, such as 1Z Einszett Glanz Wax, to extend protection against road and air pollutants, acid rain, tree sap, and bird droppings while adding a deep, high gloss shine.

Products mentioned can be found at 604 Auto Care, an auto detailing supplies store in Canada that provides the finest Vancouver Auto Detailing Supplies - Car Shampoo, Wax, Sealants, Car Polish, Buffing Pads, Leather care, Microfiber Towels, and more.

Article Source: http://EzineArticles.com/?expert=Sut_Sai_Lai

==== ==== How To Maintain Your Car. Click on the link Below http://cardetailingphoenix.com/blog ==== ====


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.