2 minute read

Commercial Products

Next Article
People & Places

People & Places

Product Profile New pressurization unit coming to North American market

At the 2022 AHR Expo in Las Vegas, Mikrofill Systems Ltd, Redditch, United Kingdom, introduced its Mikrofill 3 hydronic system pressurization unit for the North American HVAC market. The direct-type pressurization unit is available for sealed, low-pressure hot water and chilled water commercial and multifamily residential applications. Able to fill any heating or chilled water system from empty without the use of a pump, the product delivers commercial backflow protection with no RPZ valves, while providing electronic pressure management. It connects directly to the commercial building’ s incoming water supply (main or boosted). Precommissioned sensors monitor system inlet and operating pressure which automatically maintain system pre-sets. When a change in cold-fill water pressure is detected, the sensors open the Mikrofill 3 valves to top off the system. It also provides leak and flood protection. It has a fill rate of 3.8 gallons per minute, based on an incoming pressure of 30 psi. The base requirement is a water-supply pressure of 4.5 psi greater than the cold-fill requirement. Mikrofill u www.mikrofill.com

Commercial water heating system Rinnai, Atlanta, Georgia, unveiled its new tank replacement solutions for both contractors and end-users with their all-new non-condensing Demand Duo R-Series commercial water heating system. Its design connects to existing sixinch B-vent, allowing contractors to replace standard-efficiency atmospheric tanks. Sold in 80 or 119-gallon tank options, the Demand Duo R-Series eliminates the need for new vent penetrations and the pre-installed drip leg and 36-inch swivel-flex gas line reduces install time with a pre-installed electrical junction box and duplex outlet. The digital controller allows management of building recirculation without purchasing an additional aquastat. Rinnai u www.rinnai.us

Low GWP compatible compressor Emerson, Sidney, Ohio, introduced its new Copeland ZPSK7 two-stage scroll compressorlineupforresidentialandlightcommercialHVACapplications.The new CopelandZPSK7 is regulation-ready andwilloffer low GWP compatibility while beingoptimized for the R410A refrigerant. The compressors are available in 1.5 to five-ton single phase models, with three-phase compressors following in 2022. The new compressor platform will also help original equipment manufacturer (OEM) achieve additional efficiencies, making them meet new 2023 Department of Energy (DOE) regulations. Emerson u www.Climate.Emerson.com Flood prevention and backflow protection Watts, Burlington, Ont, introduced its LF909-FS with SentryPlus alert technology. Theintegrated flood sensortechnology is now standard on all large diameter (2-1/2 inch to 10 inches) Watts 909 backflow preventers. Flood sensors can be activated with add-on cellular or BMS kits. The sensors are designed to detect discharge from the RPZ backflow ’ s relief valve, so action can be taken to prevent flooding. An integrated sensor is pre-installed at the relief valve, directly before the air gap, on all large diameter 909s.

Watts u www.watts.com

Low sound rating heat pump Bosch Thermotechnology, Mississauga, Ont, announced the availability of its new heat pumps for commercial spaces — the QV Series. Available in multiple sizes and both horizontal and vertical configurations, the commercial grade QV Series features a low sound rating of 53dB. It delivers a compact cabinet, making it ideal to fit into small spaces in commercial buildings. The systems includes a constant airflow ECM DEC blower to provide the same CFM of airflow as the Bosch LV model, but at a lower RPM. The QV Series features Bosch’ s patented compressor encapsulation, which includes high density mass loaded vinyl insulation material wrapped around the blower. Bosch Thermotechnology u

www.bosch.ca

This article is from: