1-800-413-5155
pointblankenterprises.com
OFFICIAL 2018
BVP QUALIFIED SUPPLIER GUIDE
www.pointblankenterprises.com 2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
The Bulletproof Vest Partnership (BVP) is a government program that provides The Bulletproof Vest Partnership (BVP) is a government program that provides funding to purchase new body armor. Point Blank Enterprises is a qualified supplier funding to purchase new body armor. Point Blank Enterprises is a qualified supplier of the partnership of the partnership grant and can assist law enforcement and corrections officers to grant and can assist law enforcement and corrections officers to determine their BVP determine their BVP program eligibility. Call today to learn how your agency can program eligibility. Call today to learn how your agency can receive federal funding receive federal funding and wear the highest quality body armor in world – Point Blank! and wear the highest quality body armor in world – Point Blank!
It’s As Simple as 1..2..3..
Registering with the BVP system may be accomplished by following the steps listed below. If you require any assistance during this process, contact the BVP Helpdesk at (877) 758-3787 or send an email vests@usdoj.gov. Step 1: Create a User Account To create an account to access the BVP system, each user must establish a unique Office of Justice Programs (OJP) System Access username and password as well as create a BVP user profile. There are two ways in which you can create an account to access the BVP system: • Create a new OJP System Access user account and BVP user profile. • Use your active OJP System Access account that was established with another OJP System, such as the Grants Management System (GMS) or Grant Payment Request System (GPRS), then create your BVP user profile.
Step 2: Access the BVP System Once you have created a user account, you will be able to access the BVP Welcome Page to perform several registration actions, such as associating your account with a jurisdiction or LEA and updating your user account information. In order to complete the registration process and fully utilize the BVP system, you must associate your user account with a jurisdiction or LEA. Step 3: Associate User Account with a Jurisdiction or LEA After establishing a user account, you must associate your user account with an existing jurisdiction or LEA. You may associate your user account with an agency in one of the following ways: • For a registered agency, verify the amounts from a previous payment or receipt. • For a new or unregistered agency, contact the BVP Helpdesk to register the agency. Quick Resources: • BVP Home Page: http://www.ojp.usdoj.gov/bvpbasi/ • BVP FAQs: http://www.ojp.usdoj.gov/bvpbasi/bvpfaqs.htm • BVP Program Resources: https://ojp.gov/resources.htm • BVP Receipts and Payments User Guide: http://www.ojp.usdoj.gov/bvpbasi/docs/BVPReceiptsandPaymentRequestsUserGuide.pdf
POINT BLANK
PARACLETE
PACA CORRECTIONS
Click Above Icons to Visit Online Catalogs Available
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
BVP MANDATORY WEAR POLICY
• In order to receive BVP funds, jurisdictions must certify, during the application process, that all law enforcement agencies benefitting from the BVP Program have a written "mandatory wear" policy in effect. • This policy must be in place for at least all uniformed officers before any FY 2018 funding can be used by the agency. There are no requirements regarding the nature of the policy other than it being a mandatory wear policy for all uniformed officers while on duty. • The IACP has very generously provided both its Body Armor Model Policy and position paper to the BVP program. In order to obtain a copy of the Model Policy and position paper, jurisdictions must be registered with the BVP program. To obtain a copy of the Model Policy, contact the BVP Customer Support Center at 1-877-758-3787 or email vests@usdoj.gov.
IMPORTANT NOTICE
BVP funds will not be issued to an agency that does not have a mandatory Wear Policy.
A POINT BLANK REPRESENTATIVE CAN ASSIST YOU IN EVALUATING YOUR WEAR POLICY IN ORDER TO QUALIFY FOR BVP FUNDS.
POINT BLANK
PARACLETE
PACA CORRECTIONS
Click Above Icons to Visit Online Catalogs Available
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
Bulletproof Vest Partnership – FACT SHEET What is the Bulletproof Vest Partnership (BVP) program? The Bulletproof Vest Partnership Program (BVP) is administered by the U.S. Department of Justice for the purpose of protecting the lives of law enforcement officers by providing state and local law enforcement agencies assistance funds – as much as 50% of the purchase price for NIJ certified body armor. Who is eligible for funding under BVP? Law enforcement agencies and recognized units of general government as defined by the Statute who employs law enforcement officers as defined by this Act are eligible to apply for BVP funding. Can we purchase any vest with BVP funding? No. BVP funds may only be used to purchase vests on the latest NIJ standards list that are American-made. When can agencies apply for funding under BVP? The 2018 application period to register for funding under the Bulletproof Vest Partnership program is expected to open second week of April 2018 and the deadline for applying is May 29, 2018. Can I participate as a Law Enforcement Officer? Yes, if you meet the definition as provided for in the Act and its interpretation. However, you must work through your employing agency; you will not be able to register as an individual. Can we purchase other Ballistic equipment such as K9 body Armor, ballistic shields and helmets through BVP? Vests provided through this program must be tested and found to comply with the applicable NIJ standard. Vests modified for K-9 units have not been tested by NIJ and are therefore not eligible for matching funds. Can BVP funding be used for tactical armor? BVP funds can be used for tactical-level armor, but only 1 vest per officer in a replacement cycle. It the agency purchases a tacticallevel vest for an officer, it must be his primary vest; they can not then use BVP funds to purchase a regular-duty vest for the same officer during the same replacement cycle. Can we include officers in the academy in our application? Yes. This program does not make a distinction between new hires and trained or certified law enforcement officers, as long as the officers in question meet the Act's definition when the BVP funded vests are purchased. The only relevant restriction applies to positions that are authorized or funded but unfilled; jurisdictions are not permitted to include anticipated vest needs for authorized but unfilled positions in their application. Can you apply more than once in a program year? Jurisdictions are permitted to apply only once per program year. Jurisdictions may apply for additional vests during subsequent program years, even though prior year vest orders or payments are still pending. When will funding be available? Funds will be available approximately three to four months after the application deadline. Applicants will be notified, via email, when the award is made and the funds are available. After the funding is awarded, how long will an agency be able to purchase a vest before the awarded funds expire? Agencies have up to two (2) years to utilize funding awarded under the BVP program. What new technologies have been developed for body armor? Over the last 20 years, new materials and fabrics have been introduced which have contributed significantly to the wearability of body armor. Body armor manufacturers have also made a number of advances in design technology resulting in body armor with increased ballistic protection capabilities, as well as more flexibility, less weight, and ultimately more comfortable. Find out about Point Blank’s latest Alpha Elite Black NIJ .06 Level IIIA body armor – one of the lightest Level IIIA body armor models available today at www.eliteproven.com
POINT BLANK
PARACLETE
PACA CORRECTIONS
Click Above Icons to Visit Online Catalogs Available
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
Commitment to Officer Safety Backed by the strongest portfolio of product brands in the industry, including Point Blank Body Armor, PARACLETE ® and PACA Corrections, Point Blank Enterprises is committed to producing the most technologically advanced ballistic systems that not only offer superior protection but also optimum comfort in the most challenging environments. Our products are thoroughly field tested to exacting requirements and consistently surpass the most stringent testing standards. Never standing still, our delivery times continually surpass the industry average and our proven track record of quality and product performance is unsurpassed. We currently have more advanced NIJ .06-certified solutions than any other body-armor company in the industry, with a key emphasis on providing our customers with lighter, more flexible protective systems with greater ballistic capabilities.
NIJ LEVEL IIA V50 9mm FMJ
V50 .40 CAL
Available Shapes
0.20
1479
1453
MC/Python/Trufit
0.89
0.20
1506
1529
MX4
C2/C5
0.70
0.19
1604
1564
MC/Python/Trufit
C1/C5
0.70
0.19
1554
1545
MX4
DX-IIA
C1/C5
0.75
0.17
1603
1535
MC/Python/Trufit
DXF-IIA
C1/C5
0.75
0.17
1656
1628
Trilhouette
AIIA-2
C1/C5
0.57
0.16
1526
1474
MC/Python/Trufit
AIIAF-1
C1/C5
0.57
0.16
1534
1483
MX4
Model
Size
Weight
CIIA-3
C1/C5
0.89
CIIAF-2
C1/C5
BIIA BIIAF
BALLISTICS
NIJ LEVEL II Model
Size
Weight
V50 9mm FMJ V50 .357 MAG
Available Shapes
CII-3
C1/C5
1.20
0.25
1606
1588
MC/Python/Trufit
CII F-2
C1/C5
1.20
0.25
1615
1649
MX4
BII-1
C1/C5
0.75
0.20
1711
1693
MC/Python/Trufit
BIIF
C1/C5
0.87
0.23
1671
1636
MX4
DX-II
C1/C5
0.88
0.19
1720
1653
MC/Python/Trufit
DXFII-1
C1/C5
0.87
0.19
1657
1618
Trilhouette
SP+2-LE
C1/C5
0.79
0.19
1775
1708
MC/Python/Trufit
SP+2-FLE
C1/C5
0.79
0.19
1697
1634
MX4
AXII
C1/C5
0.63
0.18
1794
1761
MC/Python/Trufit
AXIIF
C1/C5
0.63
0.18
1783
1734
MX4
V50 .357 SIG
V50 44 MAG
Available Shapes
NIJ LEVEL IIIA Model
Size
Weight
CIIIA-2
C1/C5
1.47
0.30
1721
1660
MC/Python/Trufit
CIIIAF-2
C1/C5
1.47
0.30
1757
1615
MX4
BCIIIA
C1/C5
1.25
0.30
1847
1636
MC/Python/Trufit
BCIIIAF
C1/C5
1.25
0.30
1868
1707
MX4
XP IIIA-1
C1/C5
1.25
0.30
1848
1723
MC/Python/Trufit
KXP IIIA-2FO
C1/C5
1.18
0.25
1780
1651
Front Open
DX IIIA*
C1/C5
1.26
0.27
1913
1786
MC/Python/Trufit
DX IIIA
C1/C5
1.30
0.29
1996
1834
Trilhouette
FLX IIA-1
C1/C5
1.04
0.30
1773
1652
MC/Python/Trufit
FLX IIAF-1
C1/C5
1.04
0.30
1784
1708
AX IIA**
C1/C5
0.87
0.20
1870
1745
AXII AF**
C1/C5
0.87
0.20
1884
1744
AXB IIA
C1/C5
0.79
0.19
1863
1713
MC/Python/Trufit
AXB IIAF
C1/C5
0.79
0.19
1882
1791
MX4
CB-S3-BIIA-1
Model
CB-S3-BIIIA-3
NIJ IIA/ Spike 3
Level
NIJ IIIA/ Spike 3
Weight
0.97
Weight
1.27
Thickness
0.25”
Thickness
0.35”
V50 9mm
1613
V50 .357 Sig
1912
V50 .40 Cal
1616
V50 44 Mag
1782
Model Level
Model
CB-S2-BII-1
Model
Level
NIJ II/ Spike 2
S1-1
1
0.51
0.17”
Weight
1.02
S2-3
2
0.63
0.17”
MX4
Thickness
0.25”
S3-2
3
0.81
0.20”
MC/Python/Trufit
V50 9mm
1787
MX4
V50 .357 mag
1710
*
Level Weight
Exceeds NIJ, DEA and FBI testing requirements.
** Exceeds new FBI 4.1 requirements.
All models, data and specifications are subject to modification by manufacturer without notice.
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
USE YOUR BVP PROGRAM FUNDS TO PURCHASE NIJ .06 CERTIFIED BODY ARMOR THAT ALSO PROTECTS YOUR OFFICERS FROM ELECTROSHOCK WEAPONS. Only vest models that comply with the requirements of the Office of Justice Programs’ National Institute of Justice (NIJ) may be purchased with BVP Program funds - You can purchase body armor that includes electroshock weapon protection. ThorShield™ is a patented technology available in Point Blank, PACA and PARACLETE vests. While body armor saves lives and non-lethal devices such as electric stun guns prevent some fatal encounters, officers remain exposed if their body armor does not include ThorShield™.
Invest your BVP funds in officer protection by upgrading your body armor today! 2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
When Point Blank introduced the revolutionary Alpha Elite Series, we set a new low, creating the lightest body armor in history. Now we’ve done it again. The new Alpha Elite Black is even lighter than our original Alpha Elite, weighing a mere .79 psf. And with the latest generation of Dyneema® Force Multiplier Technology by DSM, a Point Blank exclusive, it offers a combination of light weight and protection previously unknown to ballistic science—with 9mm V50s greater than 2,000fps! Contact us today to learn more. And get ready to Feel The Light.
Concealable
Elite Carrier
Tactical
ARMIS Carrier
POINT BLANK
PARACLETE
PACA CORRECTIONS
Click Above Icons to Visit Online Catalogs Available
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
CONCEALABLE BODY ARMOR
ELITE • Ergonomically designed for a tailored fit with minimum visibility • Self Suspending Ballistic System™ (SSBS) prevents rolling and sagging of ballistic panels inside the carrier • Easy-access to ballistic suspension through peelback shoulder design for easy adjustment • Smart-Fabric technology helps keep you cool, dry and comfortable • Durable Water Repellent (DWR), microfiber outer shell • Micro-Spacer Inner Mesh inset positioned along the parasternum features HeiQ moisture management and anti-microbial properties • Top Loading Combo Plate Pockets accommodate 5” x 8” trauma inserts as well as 6” x 8”, 7” x 9” or 8” x 10” plates in front & back • Four 2” x 12” elastic side straps with hook tabs offer 8 point adjustability • Optional 4” x 12” side straps available • Two Breathe-O-Prene® shoulder straps • Removable elastic cummerbund stabilizes vest and provides a secure fit • Easy access ballistic panel removal with external YKK standard zipper on outer lower torso • Low profile loop used for side strap attachment points • Narrow front tail design provides a secure, less bulky fit (available with or without shirt tails) • Available with ThorShield™ sleeve electroshock weapon protection (optional) • Elite concealable ballistic panels fit into Crossover Carriers • Available in MC shape • Available colors: Black, White, Navy & Tan
Standard with ARMORVENT ® ARMORVENT® mitigates the negative effects of wearing body armor for sustained periods of time while improving the operational effectiveness and comfort.
Available with
SPEEDPLATES BVP Funds will cover SPEED Plates with Concealable Carriers when applying.
Shown in Black
Navy
Tan
Introducing the Revolutionary Elite Body Armor System
White
Incorporating the latest advancements in ballistic and Smart Fabric technology the new Elite concealable body armor system truly outperforms and over delivers in weight, thinness, flexibility and overall performance. Offered with virtually the lightest weight and highest performing NIJ .06 Level II and IIIA ballistic systems in the market today, the Elite vest provides unparalleled comfort and protection, that is matched by none.
Elite NIJ 0101.06 Ballistic Options
Available with NIJ .O6 Level IIA, II and IIIA Ballistic Systems
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
VISION VISION ® is the first total body armor system that integrates high performance ballistic materials with an innovative carrier design, featuring Outlast® Smart Fabric technology inner lining, ThorShield™ Electroshock Weapon Protection and our exclusive Self-Suspending Ballistic System. These innovations result in significantly cooler, dryer and more comfortable all-day performance. • Self Suspending Ballistic System™ (SSBS) provides optimal protective coverage • Outlast® Smart Fabric technology inner material helps keep you cool and dry • ThorShield™ sleeve electroshock weapon protection (optional) • Aegis™ antimicrobial protective properties resists growth of bacteria, mold and mildew • Durable Water Repellent (DWR) micro-fiber outershell • Removable 2”x12” waist straps provide 8-point adjustability - Optional 4”x12” straps available • Removable internal cummerbund stabilizes rear ballistic panel and helps prevent riding up when sitting • Top loading, low profile plate pockets in the front and back accommodates 5”x8” Trauma inserts as well as 6”x 8”, 7”x 9” or 8”x10” SPEED Plates, depending on the size of the carrier. • Mesh shirt tail construction or optional no tail • VISION ® concealable ballistic panels fit into Crossover Carriers • Inner zipper for enhance concealability • Available in MC shape • Available colors: Black, White, Navy & Tan
NIJ 0101.06 Ballistic Options Available with NIJ .O6 Level IIA, II and IIIA Ballistic Systems
2102 SW 2nd Street • Pompano Beach, FL 33069
Front
1-800-413-5155
pointblankenterprises.com
CONCEALABLE BODY ARMOR
HI-LITE • Lightweight design naturally flexes to the contours of your body for exceptional maneuverability • Self-Suspending Ballistic System™ features stretch Breathe-O-Prene® shoulder straps which connect to the front and back ballistic panels, ensuring optimal protective coverage • Durable Water Repellent (DWR) microfiber outershell • Dry Run® moisture management system moves moisture away from the body and helps keep you dry and comfortable • Removable 2”x12” waist straps provide 8-point adjustability – optional 4”x12” straps available • Removable internal cummerbund stabilizes ballistic panels • Plate pockets in the front and back accommodate 5”x8”, 7”x9” or 8”x10” SPEED Plates • Front twin-tail design or optional no tail • Hi-Lite concealable ballistic panels fit into Crossover Carriers • Available in MC shape • Additional protection includes 5”x8” Soft Trauma inserts • Available colors: Black, White, Navy & Tan
High Performance, Lightweight, Protection Hi-Lite Proformance has remained a hallmark of Point Blank’s line of outstanding body armor. Specially designed to provide maximum maneuverability and comfort, this exceptionally lightweight, concealable vest offers unparalleled protection when paired with our industry-leading ballistic systems.
Self-Suspending Ballistic System (SSBS)
Hi-Lite NIJ 0101.06 Ballistic Options Available with NIJ .O6 Level IIA, II and IIIA Ballistic Systems
Optional with ARMORVENT ® ARMORVENT® mitigates the negative effects of wearing body armor for sustained periods of time while improving the operational effectiveness and comfort.
Available with
SPEEDPLATES BVP Funds will cover SPEED Plates with Concealable Carriers when applying.
STANDARD 6
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
[ BALLISTICS AVAILABLE ]
1-800-413-5155
pointblankenterprises.com
STANDARD An Industry Standard
The Standard ballistic system has earned a reputation as the reliable “workhorse”, capable of defeating high energy threats while providing lightweight wearability. Officers throughout the country trust this industry standard and continue to depend on it for their protection. • Durable outershell is constructed of first quality, dimensionally stable 65% polyester/ 35% cotton fabric with a soil resistant finish • Integrated carrier design provides comprehensive protective coverage with enhanced mobility • Removable 2”x12” waist straps provide 8-point adjustability - optional 4”x12” straps available • Self-Suspending Ballistic System™ (SSBS) prevents rolling and sagging of ballistic panels • Plate pockets in the front and back accommodate 5”x8” Trauma inserts as well as 6”x8”, 7”x9” or 8”x10” SPEED Plates for additional blunt trauma protection • Removable internal cummerbund stabilizes rear ballistic panel • Split shirt tail construction or optional no tail • Standard concealable ballistic panels fit into Crossover Carriers • Available in MC shape • Available colors: Black, White, Navy & Tan
Standard NIJ 0101.06 Ballistic Options Available with NIJ .O6 Level IIA, II and IIIA Ballistic Systems
Optional with ARMORVENT
Front
®
ARMORVENT® mitigates the negative effects of wearing body armor for sustained periods of time while improving the operational effectiveness and comfort.
Available with
SPEED PLATES BVP Funds will cover SPEED Plates with Concealable Carriers when applying.
STANDARD 6
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
Back
1-800-413-5155
pointblankenterprises.com
Featuring EVAP® Technology
A NEW REALITY ARMORVENT mitigates the negative effects of wearing body armor for sustained periods of time while improving the operational effectiveness and comfort for officers. EVAP™Technology ergonomic design and patent-pending air channel ventilation pattern delivers continuous comfort, regardless of temperature operational environment or duration of operation. ®
Evaporation of sweat Convective airflow rapidly evaporates and removes sweat to keep you drier
Pulls heat away from skin Conducts heat away from the skin and stores it on the armor carrier surface
Moisture vapor transport Ventilated, pressurized serpentine surface structure creates natural vertical pathways
Ultra comfort Compression of air chambers provides improved ergonomics between torso and armor
Ventilation & Evaporation Performance heat sink device
Keeping the armor carrier drier prevents the growth of microbes and bacteria
Passive technology
• Wide, vertical air channels promote air volume and air movement between you and your armor - Acts as a diaphragm pushing / pulling air during normal locomotion / body movements • Over 100 ventilation holes creates increased moisture vapor transport – in turn, creating better evaporative performance
Odor-control
No chemicals, no batteries, no vehicle air conditioning –Your body fuels performance
Seamless integration Compatible with all body armor carriers
All seasons Not a hot weather only product – Works year round to keep you drier and more comfortable
INCREASE YOUR OPERATIONAL EDGE. Ventilation and load distribution system for all body armor platforms. • Improved Comfort • Natural Ventilation of Body Heat • Accelerated Sweat Evaporation • Improved Load Distribution • Positively Buoyant • Seamless Integration • Thin, Lightweight and Flexible • Integrated into the carrier (Elite) Concealable Vests • All concealable and crossover carriers • Outer uniform carriers Tactical Vests and Plate Carriers • All tactical vests and plate carriers
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
SPEED PLATES HARD ARMOR
SPEED Plates are the ultimate in lightweight armor protection against special threats rounds. Designed to be worn in the chest pocket of our concealable vests, SPEED plates are ultra thin and weigh only a half pound or less. These SPEED plates feature 100% polyethylene construction.
Sizes
Weight
Thickness
Female 5” x 7”
0.45 lbs.
0.35
Female 6” x 8”
0.60 lbs.
0.35
5” x 7”
0.45 lbs.
0.35
5” x 8”
0.50 lbs.
0.35
6” x 8”
0.60 lbs.
0.35
7” x 9”
0.70 lbs.
0.35
7” x 10”
0.75 lbs.
0.35
8” x 10”
0.85 lbs.
0.35
10” x 12”
1.30 lbs.
0.35
11” x 14”
2.00 lbs.
0.35
Threats Defeated When Tested ICW NIJ Certified IIIA Armor Winchester 12ga 1oz slug
Special Threats Tested Winchester 9mm 127gr SXT SPEER .357 Sig 125gr FN 5.7 x 28 (SS195) Aguila .40 S&W 95gr Tokarev 7.62 25 85gr Corbon .357 Sig 115gr Remington .30 caliber carbine
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
ODC STANDARD
CROSSOVER BODY ARMOR
Combining the ergonomic design of a concealable carrier with the functionality of a load-bearing vest, the OD-Carrier provides the best combination of protection, adaptability, and versatility. Ideally suited for daily wear in any environment, the OD-C Standard Carrier includes several new design features which make it the ideal choice for equipment carrying assignments. • Exterior carrier fabric constructed of 500 Denier Cordura® • ID Panels: • Front – 2” x 9” or 2” x 11” VELCRO® brand fasteners ID panel (Size dependent), 1” x 5” Name Panel and 3” x 3” VELCRO® badge • Back – 2” x 9” or 2” x 11” VELCRO® brand fasteners ID panel (Size dependent) • Top loading plate pockets for plates • Dual plate pockets make the larger vest able to accept smaller rifle plates • 5” x 8” Trauma Plate Pocket (All Sizes) • Center Mic/Camera attachment • Left and Right Mic Tabs • Ambidextrous sewn pouches • Dual Rifle Mag Pouch / Radio Pouch • Dual Pistol Mag Pouch / Handcuff Pouch • Utility Pouch • Adjustable and reversible side elastic closure Front • Adjustable and removable internal cummerbund • Variable Spacing circular button holes for name and badge attachment • Note Pad Pocket with VELCRO® closure • Color options: Black, Ranger Green, OD Green, Multi-cam (MUC), Midnight Navy, Coyote, and Red (RDA) Optional System Features: • Interior can accept Spacer mesh Panels • Zipper adaptors • Hang ID • Epaulettes Options, Upgrades and Accessories: • SPEED Plates • Hard Armor Plates • Interior can accept ARMORVENT ® panels • Thorshield™ Electroshock Weapon Protection Available with
SPEEDPLATES
Back STANDARD
BVP Funds will cover SPEED Plates with Concealable Carriers when applying.
6
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
[ BALLISTICS AVAILABLE ]
1-800-413-5155
pointblankenterprises.com
ODC MAVERICK Instantly convert the ODC Maverick into a protective vest with up to Level IIIA protection by inserting concealable ballistic panels. Highly versatile in design, the Maverick provides optimal functionality, comfort and performance. Features: • Available with NIJ-Standard-0101.06 Level IIA, II or IIIA ballistic system • Able to integrate PBE concealable carrier directly into ODC Sleeve cover without removal of ballistics • Exceptionally strong and durable 500 denier Cordura® outershell construction for the user • MOLLE compatible webbing on the front, back and sides
• Top loading plate pockets (Front and Back) 5” x 8” Trauma Plate Pocket (Front only) • Adjustable side cummerbund accommodates ballistic inserts • Adjustable and removable internal cummerbund • Variable spacing circular button holes for name and badge attachment • Center Mic/Camera attachment • Note Pad Pocket with VELCRO® Brand Fastener closure • Zipper adaptors and Hang ID • Custom Agency ID Placards in the front and back • Left and Right Mic Tabs
Front
Optional System Features: • Zipper adaptor and Hang ID for Note pad pocket • SPEED Plates • Hard Armor Plates • Thorshield™ Electroshock Weapon Protection • Pouches Colors: Black, Ranger Green, OD Green, Multi-cam, Navy Blue, Coyote, Silver Tan and Red Available with optional
ARMORVENT ® Retrofit Panels
Back
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
ODC MOLLE
CROSSOVER BODY ARMOR
Exceptionally durable and highly adaptive, the ODC MOLLE combines the ergonomic shape of a concealable carrier with the functionality of a load-bearing vest. Ideally suited for equipment carrying assignments, this crossover carrier provides optimum comfort, versatility and protection when paired with Point Blank’s advanced ballistic systems.
FEATURES: • Exterior carrier fabric constructed of 500 Denier Cordura® • Custom Agency ID Placards in the front and back • Top loading plate pockets for plates • Dual plate pockets make the larger vest able • MOLLE compatible webbing system to accommodate equipment pouches • 5” x 8” Trauma Plate Pocket (All Sizes) • Center Mic/Camera attachment • Left and Right Mic Tabs • Lower magazine pockets with Hook and Loop closure (Size Dependent) • Adjustable and reversible side elastic closure • Adjustable and removable internal cummerbund • Variable Spacing circular button holes for name and badge attachment • Note Pad Pocket with Hook and Loop closure • Zipper adaptor • Hang ID • Available Colors: Black, Ranger Green, OD Green, Multi-cam, Midnight Navy, Coyote, Navy Blue & Silver Tan
Front
Options, Upgrades and Accessories: • Spacer mesh inner lining • Epaulettes
Optional System Features: • SPEED Plates • Hard Armor Plates • Interior can accept ARMORVENT™ Retrofit panels • Thorshield™ Electroshock Weapon Protection • Pouches Available with optional
Back
ARMORVENT ® Retrofit Panels
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
ODC GUARDIAN Easy to don and doff, the ODC Guardian combines the versatility of a front opening vest with an advanced design which offers optimum protective coverage. Instantly convert the ODC Guardian into a ballistic protective vest by inserting Point Blank concealable ballistic panels into the front and back interior pockets. Within a matter of seconds, the ODC Guardian is ready to wear with up to Level IIIA protection.
Available with optional
ARMORVENT ® Retrofit Panels
Features: • Available with NIJ-Standard-0101.06 Level IIA, II or IIIA ballistic system • Able to integrate PBE concealable carrier directly into ODC Sleeve cover without removal of ballistics • Exceptionally strong and durable 500 denier Cordura® outer shell construction • Center zipper for easy donning and doffing • Bottom loading internal plate pocket in the front of the carrier • Top loading plate pocket for the back of the carrier • 5” x 8” Trauma Plate Pocket (Front only) • Adjustable side elastic closure (Recommended front to back) • Adjustable and removable internal cummerbund • Variable spacing circular button holes for name and badge attachment • Center Mic/Camera attachment • Note Pad Pocket with VELCRO® Brand closure • Zipper adaptors and Hang ID included • Left and Right Mic Tabs • Custom Agency ID Placards in the front and back
Front
Colors: Black, Ranger Green, OD Green, Multi-cam, Midnight Navy, Coyote, Silver Tan and Red
Optional System Features: • SPEED Plates • Hard Armor Plates • Thorshield™ Electroshock Weapon Protection • Pouches
Front Opening
2102 SW 2nd Street • Pompano Beach, FL 33069
Back
1-800-413-5155
pointblankenterprises.com
POINT BLANK INTERNATIONAL The Point Blank International is specially designed to meet global needs for a dual-functioning carrier which incorporates the contoured shape of a crossover vest which can also be worn externally as a tactical vest. This extremely versatile body armor system offers optimum adjustability with instant rifle protection by inserting hard armor plates in the front and back, easy access pockets. The result - maximum protection and total comfort at an exceptional value.
PLATE CARRIER BODY ARMOR
Features: • Removable ID patches • Top loading plate pocket • Elastic stretch side closure • Fits concealable shaped ballistics • Internal cummerbund for adjustability • Synch adjusting shoulder straps side opening design with ballistic overlap • Front and back ID panel attachment area • Options include: Collar, Throat, Biceps and Groin protection • Back to front adjustable side opening • Reinforced “man down” strap • Available in Laser Cut • Available colors: Black, Coyote, OD Green, Ranger Green & Multi-Cam
Front Full System
STANDARD
IIIA TO NIJANDARD ST 0101.06
[ BALLISTICS AVAILABLE ]
[ BALLISTICS AVAILABLE ]
Available with optional
ARMORVENT ® Retrofit Panels
Front Base Vest
NIJ 0101.06 Ballistic Options Available with NIJ .06 Level IIIA Ballistic Systems
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
POINT BLANK PLATE CARRIER When a threat situation escalates, simply don the Plate Carrier over your existing Point Blank Body Armor and immediately upgrade your protection. The carrier accepts 10” x 12” Level III or IV (Shooter’s Cut) hard armor plates and offers multiple design features. Features: • 500 denier 100% nylon construction • Maximum MOLLE compatible webbing system (front and back) • Front and back hard armor plate pockets (bottom loading) • Specially padded shoulders for added comfort • Man-down strap • Adjustable shoulder and side straps
ID panels on front and back
• Colors: Black, OD Green, Ranger Green, Multi-Cam, Coyote, Wolf Gray, *Red and *Navy (*By special order)
Front
Options: • Stand Alone NIJ .06 Level III Shooter’s Cut Plate • Stand Alone NIJ .06 Level IV Shooter’s Cut Plate • Equipment Pouches
Available with optional
ARMORVENT ® Retrofit Panels
Back
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
ARMIS The ARMIS offers a new, innovative approach to body armor design. This highly scalable, side-opening carrier allows tactical units the flexibility to configure the body armor system to meet mission specific needs. This includes the capability to release the complete vest in one quick motion, select the specific level of protection needed, while enhancing mobility, agility and substantially improved range of motion for the operator.
TACTICAL BODY ARMOR
FEATURES
• Ergonomic carrier shape offers optimum protective coverage while maintaining maximum maneuverability (Front, Back, and Sides) • Can be easily changed to non-release or adapted for right or left handed release • Available with WARSOC™ H3 Buckle system for easy donning and doffing (Optional) • Exceptionally strong and durable outershell construction • Integrated torso mesh padding system placed within Tweave lining improves airflow and breathability • Raised air channel padding with Durable Water Repellant (DWR) inner material • Padded shoulder strapping system provides adjustability and load bearing support • Ambidextrous cable channel openings on the chest • Hidden wire routing channels • Release system only requires pull cable and cummerbund adaptor • Internal cummerbund helps stabilize the vest and provides a secure fit (kit) • Sleeves inside each External Cummerbund accommodates ballistic inserts • Removable Front Flaps to secure the External Cummerbund • Kangaroo pocket on Front Flap includes 3 rifle magazine inserts • Heavy duty, reinforced “man down” strap • External, bottom loading, hard armor plate pocket in the front and rear • Plate pocket per carrier size: Small: 8” x 10”, Medium – 3XL: 10” x 12” • MOLLE Compatible Webbing Attachment System • Removable 3” x 9” ID Panels in the front and back • Bottom drainage Front Complete System • Custom Agency ID Placards with options
Release system allows in one quick motion (Optional)
Internal and external cummerbund helps stabilize the vest and provides a secure
Standard Base Vest
OPTIONS
COLORS
• Laser Cut • Side plate pouch • Lower abdomen, Groin, Lower Back, Trapezius, Bicep, Collar, and Throat ballistic accessories • WARSOC™ H3 Buckle System • Release Kit • ARMORVENT® • ThorShield®
• Ranger Green • Multi-Cam • O.D. Green • Coyote • Black • Wolf Grey
ACCESSORIES Throat & Collar
Biceps
Groin
Lower Back / Ab
Trap STANDARD
IIIA+ TO NIJ STANDARD 0101.06
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
RMV
pointblankenterprises.com
GEN IV
The revolutionary RMV GEN IV tactical armor system offers high-performance ballistic protection integrated in a fully functional and scalable design to meet the strategic needs of your specific mission. For immediate doffing of the vest, the RMV GEN IV vest can be rigged for release using three different styles of release. It also provides multiple points of adjustability for greater comfort and maximum freedom of movement. This gives it the versatility to adapt to any condition
FEATURES • Multiple release options including cable pull and SPRS Release allow you to select one of three available release position options • Hidden cable-routing openings • Internal cummerbund for enhanced stabilization Selective Point Release System (SPRS) allows you to select the exact location the vest releases
• Bungee external cummerbund stabilizer • Ballistic Insertable cummerbunds • Adjustable-plate height strap • Hook and Loop attachment area for Collar Protector and Throat Protector
Magazine divider inserts (Standard with Triple M4/AR15)
• Built-in, over-shoulder cable/hydration routing • Release/Non-release throat and collar • All accessories have the ability to insert ballistics Standard Base Vest
• Shoulder strapping system offers two points of adjustability • Removable front flap features Kangaroo pocket that accommodates three AR15/M16 mag inserts • Front and back, bottom-loading plate pocket accepts 8” x 10” or 10” x 12” hard-armor plates and ESAPI
OPTIONS
COLORS
• Side plate pouch • Groin, Trap, Bicep, Collar, and Throat ballistic accessories • WARSOC™ H3 Buckle System • Cummerbund ballistic inserts • ARMORVENT® • ThorShield®
• Ranger Green • Multi-Cam • O.D. Green • Coyote • Black • Wolf Grey
Front Complete System with options
AC CESSORIE S Throat & Collar
Biceps
STANDARD
IIIA+ TO NIJ STANDARD 0101.06
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
Groin
Trap
1-800-413-5155
pointblankenterprises.com
SOHPC
GEN IV
The SOHPC is PARACLETE’s latest hard plate carrier. It has been innovatively designed to provide unmatched comfort, protection and flexibility to meet the needs of every mission. Through the addition of an adjustable cummerbund and optional side plate pouches for hard armor plates, the SOHPC is the operator’s choice for today’s missions.
FEATURES
TACTICAL BODY ARMOR
• Extra durable, 500 denier Cordura construction • MOLLE compatible webbing throughout the vest • Adjustable two point shoulder strapping system with rear quick release buckles • Bottom loading front and back hard armor plate pockets accommodates 10” x 12” or ESAPI plates • External cummerbund system accommodates soft ballistic inserts • Foam padded trap protector available with soft ballistic inserts (Optional) • Ballistic backer inserts for hard armor plate pockets (Optional) • 3 Mag pouch included in the front flap • ID panels in the front and back • Rear drag handle • Removable front flap secures cummerbund and accommodates kangaroo pocket with removable mag inserts • Removable Internal Buckle waist strap
OPTIONS
COLORS
• Trap protector soft ballistic inserts • Ballistic backer inserts for hard armor plate pockets • WARSOC™ H3 Buckle System • ARMORVENT® • Laser Cut
• Ranger Green • Multi-Cam • O.D. Green • Coyote • Black • Wolf Grey
Front Vest
STANDARD
IIIA+ TO NIJ STANDARD 0101.06
Back Vest
[ BALLISTICS AVAILABLE ]
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
APC
pointblankenterprises.com
GEN IV
Designed to allow the operator to gain immediate protection against high powered assault weapons, the Advanced Plate Carrier (APC) takes performance to new levels. Blending the functionality of a tactical vest with the simplicity of a plate carrier, the APC accommodates soft ballistic panels, Level III or IV hard armor plates and equipment pouches.
FEATURES • Able to accept three distinct release options: 1. Center Pull Release 2. Right or Left Shoulder Pull Release 3. Right or Left Chest Pull Release • External, bottom loading hard armor plate pockets in the front and back for additional protection • Accepts soft armor inserts • Adjustable 2-piece cummerbund system • Internal “belly band” provides additional adjustability • Removable front flap secures cummerbund and accommodates kangaroo pocket with removable mag inserts • Reinforced rescue strap • Ballistic Collar, Throat, Yoke, Biceps, Abdomen, Lower Back and Groin Protection (Optional) • High abrasion inner tweave material • Admin Pocket • ID panels in the front and back
Standard Base Vest
• Name Plaque on Front and Back bodies • Two Point Adjustable Shoulder Straps
OPTIONS
• Cable routing
COLORS
• Side plate pouch • Lower abdomen, Groin, Lower Back, Bicep, Yoke, Collar, and Throat ballistic accessories • WARSOC™ H3 Buckle System • Cummerbund ballistic inserts • ARMORVENT® • ThorShield® • Laser Cut
• Push-to-talk / Chest rig attach webbing • Able to fit MBAV cut ballistics (Optional) • Side plate pockets can be ordered separately • Accommodates standard 8” x 10”, 10” x 12” hard armor plates and ESAPI • Back pocket can accept rectangle hard armor plates
• Ranger Green • Multi-Cam • O.D. Green • Coyote • Black • Wolf Grey
Complete System
STANDARD
IIIA+ TO NIJ STANDARD 0101.06
ACCESSORIES
[ BALLISTICS AVAILABLE ]
Yoke
Throat & Collar
Biceps
Groin
Lower Back / Ab
Trap
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
CALL YOUR POINT BLANK REPRESENTATIVE TODAY TO FIND OUTOUT HOW YOUYOU CALL YOUR POINT BLANK REPRESENTATIVE TODAY TO FIND HOW CANCAN OBTAIN BVPBVP FUNDS FORFOR THETHE BEST PROTECTIVE SOLUTIONS AVAILABLE. OBTAIN FUNDS BEST PROTECTIVE SOLUTIONS AVAILABLE. Manufacturer’s Representatives Manufacturer’s Representatives Darren Armstrong Darren Armstrong (Northern Ohio)Ohio) (Northern Tel: (513) 505-8189 Tel: (513) 505-8189 darren@rjwagner.net darren@rjwagner.net
Wendy Martin Wendy Martin (MI, IL) (MI, IL) Tel: (313) 610-8705 Tel: (313) 610-8705 wmartin@pbearmor.com wmartin@pbearmor.com
MikeMike Evans Evans (ND, SD, (ND,NE, SD,MN, NE,WI, MN,IA) WI, IA) Tel: (612) 801-8103 Tel: (612) 801-8103 Mike@rjwagner.net Mike@rjwagner.net
GregGreg McCain McCain (CO, UT, (CO,WY,) UT, WY,) Tel: (719) 553-9393 Tel: (719) 553-9393 gmccain@pbearmor.com gmccain@pbearmor.com
Randy Arrington Randy Arrington (AL, TN) (AL, TN) Tel: (334) 220-7989 Tel: (334) 220-7989 rarrington@pbearmor.com rarrington@pbearmor.com
RyanRyan Mountz Mountz (Florida) (Florida) Tel: (954) 658-0525 Tel: (954) 658-0525 rmountz@pbearmor.com rmountz@pbearmor.com
Michael Beaver Michael Beaver (DC, MD, (DC,VA, MD,WV) VA, WV) Tel: (954) 495-1457 Tel: (954) 495-1457 mbeaver@pbearmor.com mbeaver@pbearmor.com
JohnJohn Ringo Ringo (AZ, NM, (AZ,NV) NM, NV) Tel: (954) 644-3581 Tel: (954) 644-3581 jringo@pbearmor.com jringo@pbearmor.com
TracyTracy Hermes Hermes (AK, WA, MT) (AK,OR, WA,ID, OR, ID, MT) Tel: (971) 235-1298 Tel: (971) 235-1298 thermes@pbearmor.com thermes@pbearmor.com
Michael Sheedy Michael Sheedy (CT, MA, VT,RI,NH) (CT,ME, MA,RI, ME, VT, NH) Tel: (732) 778-1406 Tel: (732) 778-1406 msheedy@pbearmor.com msheedy@pbearmor.com
Ed Carey Ed Carey (LA, AR, (LA,MS) AR, MS) Tel: (954)-218-0878 Tel: (954)-218-0878 ecarey@pbearmor.com ecarey@pbearmor.com
GaryGary Towers Towers (PA, NJ, (PA,DE) NJ, DE) Tel: (609) 820-5115 Tel: (609) 820-5115 gtowers@pbearmor.com gtowers@pbearmor.com
ChrisChris Hirt Hirt (California) (California) Tel: (954) 529-0039 Tel: (954) 529-0039 chirt@pbearmor.com chirt@pbearmor.com
CleteClete Turner Sheila Turner Turner Sheila Turner (TX, OK) (TX, OK) (TX, OK) (TX, OK) 860-7924 Tel: (407) 367-8219 Tel: (210) 860-7924 Tel: (407) 367-8219 Tel: (210) cturner@pbearmor.com sturner@pbearmor.com cturner@pbearmor.com sturner@pbearmor.com
David Finnigan David Finnigan Northern California Northern California (954)(954) 999-3056 999-3056 dfinnigan@pbearmor.com dfinnigan@pbearmor.com
Randy WillsWills Randy (HI) (HI) Tel: (719)-354-0310 Tel: (719)-354-0310 rwills@pbearmor.com rwills@pbearmor.com
David Kiefer David Kiefer (NC, SC, (NC,GA) SC, GA) Tel: (336) 880-5382 Tel: (336) 880-5382 dkiefer@pbearmor.com dkiefer@pbearmor.com
Dan Wheeler Dan Wheeler (OH, IN, KY) (OH, IN, KY) Tel: (513) 702-3562 Tel: (513) 702-3562 dwheeler@pbearmor.com dwheeler@pbearmor.com
MikeMike Lafferty Lafferty (Southern OH, Southern IN, KY) (Southern OH, Southern IN, KY) Tel: (513) 638-2334 Tel: (513) 638-2334 lafferty@rjwagner.net lafferty@rjwagner.net
Shawn Mayfield Shawn Mayfield Corrections Specialist-Central Region Corrections Specialist-Central Region (954)(954) 547-6992 547-6992 smayfield@pbearmor.com smayfield@pbearmor.com
RyanRyan Nelson Nelson (MO, (MO, IA, KS,IA,NE) KS, NE) Tel: (954) 728 0646 Tel: (954) 728 0646 rnelson@pbearmor.com rnelson@pbearmor.com
Sal LaCova Sal LaCova (NY) (NY) (917)-968-7326 (917)-968-7326 slacova@pbearmor.com slacova@pbearmor.com
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
WA
VT NH
MT
ME
ND MN
OR ID
MI
WY NV CA
IL
AZ
CO
KS
CT PA
IA
NE UT
MA
NY
WI
SD
OH
IN
VA
KY
OK
SC
AR MS
TX
MD
NC
TN NM
NJ DE
WV
MO
RI
AL
GA
LA FL
AK HI
Point Blank Enterprises is supported by a dedicated network of distributors who provide advanced protective solutions, exceptional market knowledge and comprehensive customer service to our valued customers around the world. Visit www.pointblankenterprises.com and click Where to Buy
POINT BLANK
PARACLETE
PACA CORRECTIONS
Click Above Icons to Visit Online Catalogs Available
Point Blank Enterprises • 2102 Southwest 2nd Street ••Pompano Beach, FL 33069 • 800•413-5155 630-0900 www.pointblankenterprises.com 1 (800) 413-5155 (954)• (954) 630-0900
2102 SW 2nd Street • Pompano Beach, FL 33069
1-800-413-5155
pointblankenterprises.com
2102 SW 2nd Street • Pompano Beach, FL 33069