Topic: Optimize your Water Heater and Start Saving Your Power Water geyser is the second largest single user of energy in the home. While we all enjoy a soothing hot shower, rising energy costs—along with their adverse environmental impact—make it a good time to take a closer look at the various options now available. Types of water geyser 1. Storage Tank: The most common hot water system used in homes. Water is kept constantly heated in the storage tank by electricity, natural gas, oil, or propane. Hot water is drawn out of the top of the tank when a faucet is turned on and cold water flows in the bottom to replace it. 2. Tankless: Also known as on demand water heaters. Water is heated by electricity or gas when the water flows through it without the need for a tank. 3. Solar: Water is circulated from the tank through a solar collector where it is heated by the sun. If the water in the tank is not hot enough, a conventional water heater is used to bring it up to the desired temperature. 4. Heat Pump: Heat pumps use electricity to move heat from one place to another. Heat pumps can be used for water heating alone or in combination with your heating and air conditioning system. The energy that is required for your water to be heated is surely considerable, but there is good news. There are some simple ways to have an energy efficient water heater to help in cutting the water heating bills. 1. Use less hot water: For starters, don't let the tap run needlessly—leaving the water running during your morning cut or while you brush your teeth can waste up to eight gallons per day! On a bigger scale, stick to short showers and cut back on long baths. Have a dishwasher or washing machine in your home? Make sure you only run them when they are full. 2. Turn down the water heater's thermostat: Many producers set water heater controls at 140ºF, nevertheless most homes usually can get by just fine with a regulator set at 120ºF. Not only is this temperature considered safe for the vast majority of cases, it also slows mineral buildup and corrosion in your water heater and pipes.
3. Isolate your water heater: Another way to cut back on surplus cost due to heat loss is to separate your hot water tank, just like you would insulate your walls or roof. If you have a brand, spanking new water tank chances are it's already insulated, but if you have an older model do some investigating to see if a little do it yourself action is needed. 4. Buy a new, more efficient model: While most water heaters can last about10-15 years, if you're looking to stay as energy-efficient as possible it’s best to start thinking about a new one once your current model celebrates its seventh birthday. There are several different kinds of heaters out there, including:
Tankless coil and indirect heaters
Solar heaters
Heat pump heaters
Conventional storage heaters
Tankless or demand-type heaters
Author’s Bio Tom Steve in this post explains some of the types of water geyser and the simple ways to have an energy effective water heater.