The best Rollschutz covers in Europe
Winner of Golden Wave award 2013
NEW DEVELOPMENT From now on, BAC Rollschutz covers will be available in 2 designs of lateral longitudinal reinforcing pieces Standard designs for SwissTop / NovaTrend / Multiversal Lateral edge with innovative hemstitch
For all designs
rectangular
Rollschutz
Additional safety Longitudinal bracing with tensioning kit can be integrated in the hem. (at an extra charge)
Original B A C longitudinal reinforcing piece for SwissTop-K / NovaTrend-K / Multiversal-K Lateral edge with tried and tested "Bieri" - piping technology
Particularly suitable for: lateral ladder cut-out (lateral spar cut-out) Special pool shapes (e.g. kidney shape)
THERMAL ROLLSCHUTZ SwissTop / SwissTop-K The open-air pool cover without water contact for skimmer pool. It protects against accident, dirt and heat. Consists of polyester reinforced, durable STAMOID film, supported by aluminium pipes lying flat on the pool edge, which, except for the start and end pipe, are not visible under the cover material. Gap between the pipes is approx. 1.30m. Centrically punched storm water drains. Smooth and easy-to-clean surface. Operation with crank handle 1:3 (up to 46m²) or 1:7 (above 46m²).Suitable for rectangular pools with up to 5m wide edge support. Edge support width: 25cm.
THERMAL ROLLSCHUTZ Multiversal / Multiversal-K Universal open-air pool cover without water contact for skimmer pool. Protects against accident, dirt and heat. Consisting of polyester reinforced, durable STAMOID film, supported by aluminium pipes inwrought in the film at the top. Gap between the pipes is approx. 1.30m. Centrically punched storm water drains. Smooth and easy-to-clean surface. Operation with crank handle 1:3 (up to 46m²) or 1:7 (above 46m²).Suitable for nearly all pool shapes with width up to 5m. Edge support width: 20-30cm. Release belt with quick acting fastener and retractable stainless steel pins.
THERMAL ROLLSCHUTZ NovaTrend / NovaTrend-K Budget-priced open-air pool cover without water contact for skimmer pool. Protects against accident, dirt and heat. Consists of polyester reinforced, durable STAMOID film, supported by aluminium pipes lying flat on the pool edge, which, except for the start and end pipe, are only visible on the cover material in the edge support area . Gap between the pipes is approx. 1.30m. Centrically punched storm water drains. Smooth and easy-to-clean surface. Operation with crank handle 1:3 (up to 46m²) or 1:7 (above 46m²).Suitable for nearly all pool shapes with width up to 5m. Edge support width: 20-30cm. Release belt with quick acting fastener and retractable stainless steel pins.
All models using sliding and replaceable quick acting fastener release technology at the start and end pipe as well as retractable foot-friendly stainless steel earth anchor. Soft slider at the bottom of all pipes to protect sensitive pool surfaces. Depending upon the requirement, design with telescopic pipes at no extra charge. Maximum flexibility due to both-sided crank holder. CAUTION: Make sure that you order "rimmed plate package" for rimmed plates for the models Multiversal and NovaTrend. The use of rimmed plates is not recommended for the model SwissTop. Childproof only for edge support of min. 20cm as well as entrenched edge plates e.g. laid in mortar. Translucent design: UV-stabilised STAMOID film with approx. 80% permeability for thermal radiation The crank handle is not included in the price and must be ordered separately.
AUSZEICHNUNG KATEGORIE ÜBERDACHUNGEN & ABDECKUNGEN
Der Innovationspreis von Schwimmbad & Sauna
GOLDEN WAVE 2013
Bieri Alpha Covers
FACH SCHRIFTEN VERLAG Fellbach, den 07. März 2013
GW_Urkunden_2013.indd 9
Grosswangen
M u lt iv er s a l K , S wi s s to p K , N o va tr e nd K
Wolfgang Kriwan Geschäftsführer Fachschriften-Verlag Fellbach
André Schneider Chefredakteur Schwimmbad & Sauna
20.02.13 08:30