DC Electric Glass Fibre Chopper for Volumetric Mixers
DC ELECTRIC GLASS FIBRE CHOPPER FOR VOLUMETRIC MIXERS The latest Power-Sprays glass fibre chopper for volumetric concrete mixer trucks is designed to automatically cut and feed alkali-resistant glass fibre directly into the continuous mixing auger. This low maintenance system enables even fibre distribution and accurate dosing. Driven by a DC motor with a variable speed controller the unit is built into a cabinet, which is also designed to house and protect the Alkali Resistant glass fibre roving. The units require a 24 volt DC supply and a small amount of compressed air. features include:
Unique
Large diameter cutter roller for high outputs and low maintenance Pneumatic ram to maintain pressure between the chopper rollers to ensure cut consistency Can operate with High Tex glass fibre rovings In-built air mover system to convey fibres to the mixer
Specification: Weight: O/A Dimension: Electrical Requirement: Motor Maximum Speed: Air Requirements: Roving holding capacity: Fibre Cut Lengths: Output:
For further information contact: Power-Sprays Limited Avonmouth Way Avonmouth Bristol BS11 9YA
<50 kgs (excluding fibre) 35×38 ×60 cm 24V DC 3000 RPM 300 litres/min (10cfm) at 1bar (15psi) One bobbin (approximate 19 kgs) 6mm and 12.5mm Up to approximately 1 kg per minute depending on the Tex of the glass fibre roving.
: +44 (0)117 9820067 Fax: +44 (0)117 9820060 info@power-sprays.co.uk www.power-sprays.co.uk
MEMBERS OF THE INTERNATIONAL GLASSFIBRE REINFORCED CONCRETE ASSOCIATION