Prealpina Suisse - Frühlingsaktion 2023 by Prealpina Suisse GmbH

SET-AKTION

SET MPE 3T, 45° Z=3

SET MSE 4T, 35° Z=4

425 CHF Netto / Set

1 Set à 330 CHF ab 2 Sets à 315 CHF

VHM Fräser 600 Nano Fraises

Pro Fräser 6.60 / 6.30 CHF

Jede Box beinhaltet 50 VHM Fräser 10 Stück jedes genannten Durchmessers

Chaque coffret contient 50 fraises métal dur, 10 pièces de chaque dimensions

Solange der Vorrat reicht! / Jusqu’à épuisement du stock!

d sl L Schaft 1.0 3.0 50.0 4.0 1.5 4.0 50.0 4.0 2.0 6.0 50.0 4.0 3.0 8.0 50.0 4.0 4.0 11.0 50.0 4.0

carbure monobloc

PREALPINA SUISSE GmbH | Ringstrasse 18, CH 5432 Neuenhof Fon +41 56 416 01 80 – www.prealpina-suisse.ch – info@prealpina-suisse.ch | September 2022

UNSERE AKTIONEN IM ÜBERBLICK NOS ACTIONS EN VUE D’ENSEMBLE

Alle Ausverkaufsartikel sind von Retouren ausgeschlossen. Nur solange der Vorrat reicht. Tous les article soldés sont exclues de la retourne. Tant que en stock.

Preise exkl. MWST u. Verpackung, Preis- u. Modelländerungen sowie Zwischenverkauf vorbehalten, März 2023

Tous les prix s’entendent hors TVA légale et sont indiques en Francs Suisses (CHF),

1 PREALPINA SUISSE GmbH – 2023 MX230 2-3 MXH230 3-4 MX235 4-5 MXH235 6 MX240 7-8 MXH240 8 MX245 9 MXH245 10 MX425 10 MX430 11 MX435 11 MX440 12 MX445 12 MSZ345 13-14 MSX440 14 MSXH440R 15 MHRSH430RSF 16-19 MSUSZ440 20-21 MSUSZ440-LN 21-22 MSCZ440 22-23 MSCZ440-LN 24 DHR237 25-26 DHR237R 27-29 DRB230 30-31 MACH225 32 MRBSH330 33 MSBSH330-5X 34 MSB345 34-35 MSBH345 35 AL2D-2 36 AL3D-2 37 AL4D-2 37 AL5D-2 38 ALZ345 38-39 VHM – Dynamikfräser (TSC) Artikel 591... 40 Artikel 592... 40 Artikel 593... 40 VHM – Hybridfräser (TSC) Artikel 595... 41 VHM – Dynamikfräser 2xD (TSC) Artikel 597... 41 VHM – Dynamikfräser 3xD (TSC) Artikel 598... 42 VHM – Schaftfräser Turbomax (TSC) Artikel 789... 42 VHM – Schaftfräser Starmax XL Artikel 728... 42 VHM - Schaftfräser Starmax Artikel 731... 43 Artikel 732... 43 Artikel 733... 44 VHM - Schaftfräser Fightmax Artikel 231... 44 Artikel 233... 45 Artikel 234... 45 Artikel 287... 46 Artikel 288... 46 VHM - Inox-Hochleistungsfräser Artikel 1.388... 47 Artikel 1.390... 47 Artikel 1.392... 48 Artikel 1.395... 48 VHM – Schaftfräser mit IK Artikel 2.405... 48 VHM – Schaftfräser Artikel 2.404... 49 VHM – Schaftfräser Artikel 2.406.... 49 VHM – Schruppfräser Primus Artikel 2.413... 50 VHM – Schruppfräser Primus mit IK Artikel 251... 50 VHM – Dynamikfräser (TSC) Artikel 2.414... 50 Artikel 2.410... 51 VHM - Schaftfräser Artikel 244... 51

VHM - Schruppfräser Typ WF mit IK Artikel 252... 52 VHM - Schruppfräser Typ WR mit IK Artikel 253... 52 VHM - Schaftfräser mit IK Artikel 247... 53 VHM – Vor- u. Rückwärtsentgrater 90° Artikel 900... 53 VHM – Entgrater 60° Artikel 760... 54 VHM – Entgrater 90° Artikel 790... 54 PRHSC4SG INOX 55 PRHSC4SG INOX kurz 55 DIVERSE SETS & AKTIONEN 4 Geometrien Set Speedtiger 56 KKH-Set 56 30% – PE-Tisin-Set 45° 56 30% – SET AD 35°-38° TIALN SET BD 42°-45° TIALN 56 VHM Bohrstangen SET 57 15% – Xebec Aktion 57

mars 2023

MX230

2 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX230 0.1 0.1 0.2 45 4 12° 73.00 62.05 MX230 0.2 0.2 0.4 45 4 12° 43.50 36.98 MX230 0.3 0.3 0.6 45 4 12° 37.50 31.88 MX230 0.4 0.4 0.8 45 4 12° 42.50 36.13 MX230 0.5 0.5 1.0 45 4 12° 21.50 18.28 MX230 0.6 0.6 1.2 45 4 12° 32.50 27.63 MX230 0.7 0.7 1.4 45 4 12° 35.50 30.18 MX230 0.8 0.8 1.6 45 4 12° 21.50 18.28 MX230 0.9 0.9 1.8 45 4 12° 35.50 30.18 MX230 1 1.0 2.0 45 4 12° 19.50 16.58 MX230 1.1 1.1 2.2 45 4 12° 40.50 34.43 MX230 1.2 1.2 2.4 45 4 12° 21.50 18.28 MX230 1.3 1.3 2.6 45 4 12° 40.50 34.43 MX230 1.4 1.4 2.8 45 4 12° 40.50 34.43 MX230 1.5 1.5 3.0 45 4 12° 19.50 16.58 MX230 1.6 1.6 3.2 45 4 12° 40.50 34.43 MX230 1.7 1.7 3.4 45 4 12° 40.50 34.43 MX230 1.8 1.8 3.6 45 4 12° 21.50 18.28 MX230 1.9 1.9 3.8 45 4 12° 41.50 35.28 MX230 2 2.0 4.0 45 4 12° 19.50 16.58 MX230 2.1 2.1 4.2 45 4 12° 40.50 34.43 MX230 2.2 2.2 4.4 45 4 12° 40.50 34.43 MX230 2.3 2.3 4.6 45 4 12° 40.50 34.43 MX230 2.4 2.4 4.8 45 4 12° 40.50 34.43 MX230 2.5 2.5 5.0 45 4 12° 19.50 16.58 MX230 2.6 2.6 5.2 45 4 12° 51.50 43.78 MX230 2.7 2.7 5.4 45 4 12° 51.50 43.78 MX230 2.8 2.8 5.6 45 4 12° 51.50 43.78 MX230 2.9 2.9 5.8 45 4 12° 51.50 43.78 MX230 3 3.0 6.0 45 6 12° 24.50 20.83 MX230 3.1 3.1 6.2 45 6 12° 53.50 45.48 MX230 3.2 3.2 6.4 45 6 12° 53.50 45.48 MX230 3.3 3.3 6.6 45 6 12° 53.50 45.48 MX230 3.4 3.4 6.8 45 6 12° 53.50 45.48 MX230 3.5 3.5 7.0 45 6 12° 43.50 36.98 MX230 3.6 3.6 7.2 45 6 12° 53.50 45.48 MX230 3.7 3.7 7.4 45 6 12° 53.50 45.48 MX230 3.8 3.8 7.6 45 6 12° 53.50 45.48 MX230 3.9 3.9 7.8 45 6 12° 53.50 45.48 MX230 4 4.0 8.0 45 6 12° 26.50 22.53 MX230 4.1 4.1 8.2 45 6 12° 53.50 45.48 MX230 4.2 4.2 8.4 45 6 12° 53.50 45.48 MX230 4.3 4.3 8.6 45 6 12° 53.50 45.48 MX230 4.4 4.4 8.8 45 6 12° 53.50 45.48 MX230 4.5 4.5 9.0 50 6 12° 50.50 42.93 MX230 4.6 4.6 9.2 50 6 12° 61.50 52.28 MX230 4.7 4.7 9.4 50 6 12° 61.50 52.28 MX230 4.8 4.8 9.6 50 6 12° 61.50 52.28 ▪ Geignet für Umfang- und Nutenfräsen Adaptée à l’usinage de contours et de rainures ▪ DC ≤ 3.0 Toleranz 0 /-0.01 | 3.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC < 6.0 Toleranz -0.01 /-0.03

la page

15% RABATT

Fortsetzung auf der nächsten Seite

Suite à

MXH230

▪ Geeignet für die Bearbeitung von hitzeresistenten Legierungen wie auch für rostfreie Stähle und Titanlegierungen | Adaptée à l’usinage d’alliages résistants à la chaleur ainsi qu’aux aciers inoxydables et alliages de titane

3 PREALPINA SUISSE GmbH – 2023 Fortsetzung auf der nächsten Seite | Suite à la page suivante Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX230 4.9 4.9 9.8 50 6 12° 61.50 52.28 MX230 5 5.0 10.0 50 6 12° 29.50 25.08 MX230 5.1 5.1 10.2 50 6 12° 61.50 52.28 MX230 5.2 5.2 10.4 50 6 12° 61.50 52.28 MX230 5.3 5.3 10.6 50 6 12° 61.50 52.28 MX230 5.4 5.4 10.8 50 6 12° 61.50 52.28 MX230 5.5 5.5 11.0 50 6 12° 52.50 44.63 MX230 5.6 5.6 11.2 50 6 12° 64.00 54.40 MX230 5.7 5.7 11.4 50 6 12° 64.00 54.40 MX230 5.8 5.8 11.6 50 6 12° 64.00 54.40 MX230 5.9 5.9 11.8 50 6 12° 64.00 54.40 MX230 6 6.0 12.0 50 6 – 31.50 26.78 MX230 7 7.0 14.0 65 8 12° 96.00 81.60 MX230 8 8.0 16.0 65 8 – 78.00 66.30 MX230 9 9.0 18.0 75 10 12° 134.50 114.33 MX230 10 10.0 20.0 75 10 – 98.00 83.30 MX230 12 12.0 24.0 80 12 – 134.50 114.33

15% RABATT Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MXH230 0.1 0.1 0.2 45 4 12° 80.00 68.00 MXH230 0.2 0.2 0.4 45 4 12° 51.50 43.78 MXH230 0.3 0.3 0.6 45 4 12° 40.50 34.43 MXH230 0.4 0.4 0.8 45 4 12° 46.50 39.53 MXH230 0.5 0.5 1.0 45 4 12° 28.50 24.23 MXH230 0.6 0.6 1.2 45 4 12° 39.50 33.58 MXH230 0.7 0.7 1.4 45 4 12° 42.50 36.13 MXH230 0.8 0.8 1.6 45 4 12° 28.50 24.23 MXH230 0.9 0.9 1.8 45 4 12° 42.50 36.13 MXH230 1 1.0 2.0 45 4 12° 24.50 20.83 MXH230 1.1 1.1 2.2 45 4 12° 43.50 36.98 MXH230 1.2 1.2 2.4 45 4 12° 28.50 24.23 MXH230 1.3 1.3 2.6 45 4 12° 43.50 36.98 MXH230 1.4 1.4 2.8 45 4 12° 43.50 36.98 MXH230 1.5 1.5 3.0 45 4 12° 25.50 21.68 MXH230 1.6 1.6 3.2 45 4 12° 43.50 36.98 MXH230 1.7 1.7 3.4 45 4 12° 43.50 36.98 MXH230 1.8 1.8 3.6 45 4 12° 28.50 24.23 MXH230 1.9 1.9 3.8 45 4 12° 43.50 36.98 MXH230 2 2.0 4.0 45 4 12° 25.50 21.68

▪ DC < 0.5 Toleranz 0 /-0.01 | 0.5 ≤ DC ≤ 3.0 Toleranz 0 /-0.015 ▪ 3.0 < DC < 6.0 Toleranz 0 /-0.02 | DC = 6.0 Toleranz -0.01 /-0.03

15% RABATT

MXH230

MX235

▪ Verwirklichung von feinen und präzisen Oberflächen auf unlegierten und legierten Stählen | Réalisation d’usinages ultra précis dans des aciers alliés / non alliés

4 PREALPINA SUISSE GmbH – 2023

▪ DC ≤ 3.0 Toleranz 0 /-0.01 | 3.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX235 0.1 0.1 0.3 45 4 12° 73.00 62.05 MX235 0.2 0.2 0.6 45 4 12° 43.50 36.98 MX235 0.3 0.3 0.9 45 4 12° 37.50 31.88 MX235 0.4 0.4 1.2 45 4 12° 42.50 36.13 MX235 0.5 0.5 1.5 45 4 12° 21.50 18.28 MX235 0.6 0.6 1.8 45 4 12° 32.50 27.63 MX235 0.7 0.7 2.1 45 4 12° 35.50 30.18 MX235 0.8 0.8 2.4 45 4 12° 21.50 18.28 MX235 0.9 0.9 2.7 45 4 12° 35.50 30.18 MX235 1 1.0 3.0 45 4 12° 19.50 16.58 MX235 1.1 1.1 3.3 45 4 12° 40.50 34.43 MX235 1.2 1.2 3.6 45 4 12° 21.50 18.28 MX235 1.3 1.3 3.9 45 4 12° 40.50 34.43 MX235 1.4 1.4 4.2 45 4 12° 40.50 34.43 MX235 1.5 1.5 4.5 45 4 12° 19.50 16.58 MX235 1.6 1.6 4.8 45 4 12° 40.50 34.43 MX235 1.7 1.7 5.1 45 4 12° 40.50 34.43 MX235 1.8 1.8 5.4 45 4 12° 21.50 18.28 MX235 1.9 1.9 5.7 45 4 12° 40.50 34.43 MX235 2 2.0 6.0 45 4 12° 19.50 16.58 Fortsetzung auf der nächsten Seite | Suite à la page suivante 15% RABATT Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MXH230 2.1 2.1 4.2 45 4 12° 43.50 36.98 MXH230 2.2 2.2 4.4 45 4 12° 43.50 36.98 MXH230 2.3 2.3 4.6 45 4 12° 43.50 36.98 MXH230 2.4 2.4 4.8 45 4 12° 43.50 36.98 MXH230 2.5 2.5 5.0 45 4 12° 25.50 21.68 MXH230 2.6 2.6 5.2 45 4 12° 55.50 47.18 MXH230 2.7 2.7 5.4 45 4 12° 55.50 47.18 MXH230 2.8 2.8 5.6 45 4 12° 55.50 47.18 MXH230 2.9 2.9 5.8 45 4 12° 55.50 47.18 MXH230 3 3.0 6.0 45 6 12° 32.50 27.63 MXH230 3.5 3.5 7.0 45 6 12° 48.50 41.23 MXH230 4 4.0 8.0 45 6 12° 35.50 30.18 MXH230 4.5 4.5 9.0 50 6 12° 55.50 47.18 MXH230 5 5.0 10.0 50 6 12° 37.50 31.88 MXH230 5.5 5.5 11.0 50 6 12° 55.50 47.18 MXH230 6 6.0 12.0 50 6 41.50 35.28

15% RABATT

MX235

5 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX235 2.1 2.1 6.3 45 4 12° 40.50 34.43 MX235 2.2 2.2 6.6 45 4 12° 40.50 34.43 MX235 2.3 2.3 6.9 45 4 12° 40.50 34.43 MX235 2.4 2.4 7.2 45 4 12° 40.50 34.43 MX235 2.5 2.5 7.5 45 4 12° 19.50 16.58 MX235 2.6 2.6 7.8 45 4 12° 51.50 43.78 MX235 2.7 2.7 8.1 45 4 12° 51.50 43.78 MX235 2.8 2.8 8.4 45 4 12° 51.50 43.78 MX235 2.9 2.9 8.7 45 4 12° 51.50 43.78 MX235 3 3.0 9.0 45 6 12° 24.50 20.83 MX235 3.1 3.1 9.3 45 6 12° 53.50 45.48 MX235 3.2 3.2 9.6 45 6 12° 53.50 45.48 MX235 3.3 3.3 9.9 45 6 12° 53.50 45.48 MX235 3.4 3.4 10.2 45 6 12° 53.50 45.48 MX235 3.5 3.5 10.5 45 6 12° 44.50 37.83 MX235 3.6 3.6 10.8 45 6 12° 53.50 45.48 MX235 3.7 3.7 11.1 45 6 12° 53.50 45.48 MX235 3.8 3.8 11.4 45 6 12° 53.50 45.48 MX235 3.9 3.9 11.7 45 6 12° 53.50 45.48 MX235 4 4.0 12.0 50 6 12° 26.50 22.53 MX235 4.1 4.1 12.3 50 6 12° 53.50 45.48 MX235 4.2 4.2 12.6 50 6 12° 53.50 45.48 MX235 4.3 4.3 12.9 50 6 12° 53.50 45.48 MX235 4.4 4.4 13.2 50 6 12° 53.50 45.48 MX235 4.5 4.5 13.5 50 6 12° 51.50 43.78 MX235 4.6 4.6 13.8 55 6 12° 61.50 52.28 MX235 4.7 4.7 14.1 55 6 12° 61.50 52.28 MX235 4.8 4.8 14.4 55 6 12° 61.50 52.28 MX235 4.9 4.9 14.7 55 6 12° 61.50 52.28 MX235 5 5.0 15.0 55 6 12° 29.50 25.08 MX235 5.1 5.1 15.3 55 6 12° 61.50 52.28 MX235 5.2 5.2 15.6 55 6 12° 61.50 52.28 MX235 5.3 5.3 15.9 55 6 12° 61.50 52.28 MX235 5.4 5.4 16.2 55 6 12° 61.50 52.28 MX235 5.5 5.5 16.5 60 6 12° 51.50 43.78 MX235 5.6 5.6 16.8 60 6 12° 64.00 54.40 MX235 5.7 5.7 17.1 60 6 12° 64.00 54.40 MX235 5.8 5.8 17.4 60 6 12° 64.00 54.40 MX235 5.9 5.9 17.7 60 6 12° 64.00 54.40 MX235 6 6.0 18.0 60 6 – 31.50 26.78 MX235 7 7.0 21.0 65 8 12° 104.00 88.40 MX235 8 8.0 24.0 65 8 – 86.00 73.10 MX235 9 9.0 27.0 75 10 12° 146.50 124.53 MX235 10 10.0 30.0 75 10 – 108.00 91.80 MX235 12 12.0 36.0 80 12 – 146.50 124.53 15% RABATT

MXH235

6 PREALPINA SUISSE GmbH – 2023

▪ DC < 0.5 Toleranz 0 /-0.01 | 0.5 ≤ DC ≤ 3.0 Toleranz 0 /-0.015 ▪ 3.0 < DC < 6.0 Toleranz 0 /-0.02 | DC = 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MXH235 0.1 0.1 0.3 45 4 12° 80.00 68.00 MXH235 0.2 0.2 0.6 45 4 12° 52.50 44.63 MXH235 0.3 0.3 0.9 45 4 12° 42.50 36.13 MXH235 0.4 0.4 1.2 45 4 12° 46.50 39.53 MXH235 0.5 0.5 1.5 45 4 12° 28.50 24.23 MXH235 0.6 0.6 1.8 45 4 12° 41.50 35.28 MXH235 0.7 0.7 2.1 45 4 12° 44.50 37.83 MXH235 0.8 0.8 2.4 45 4 12° 28.50 24.23 MXH235 0.9 0.9 2.7 45 4 12° 44.50 37.83 MXH235 1 1.0 3.0 45 4 12° 24.50 20.83 MXH235 1.1 1.1 3.3 45 4 12° 43.50 36.98 MXH235 1.2 1.2 3.6 45 4 12° 28.50 24.23 MXH235 1.3 1.3 3.9 45 4 12° 43.50 36.98 MXH235 1.4 1.4 4.2 45 4 12° 43.50 36.98 MXH235 1.5 1.5 4.5 45 4 12° 24.50 20.83 MXH235 1.6 1.6 4.8 45 4 12° 43.50 36.98 MXH235 1.7 1.7 5.1 45 4 12° 43.50 36.98 MXH235 1.8 1.8 5.4 45 4 12° 28.50 24.23 MXH235 1.9 1.9 5.7 45 4 12° 43.50 36.98 MXH235 2 2.0 6.0 45 4 12° 25.50 21.68 MXH235 2.1 2.1 6.3 45 4 12° 43.50 36.98 MXH235 2.2 2.2 6.6 45 4 12° 43.50 36.98 MXH235 2.3 2.3 6.9 45 4 12° 43.50 36.98 MXH235 2.4 2.4 7.2 45 4 12° 43.50 36.98 MXH235 2.5 2.5 7.5 45 4 12° 25.50 21.68 MXH235 2.6 2.6 7.8 45 4 12° 55.50 47.18 MXH235 2.7 2.7 8.1 45 4 12° 55.50 47.18 MXH235 2.8 2.8 8.4 45 4 12° 55.50 47.18 MXH235 2.9 2.9 8.7 45 4 12° 55.50 47.18 MXH235 3 3.0 9.0 45 6 12° 37.50 31.88 MXH235 3.5 3.5 10.5 45 6 12° 53.50 45.48 MXH235 4 4.0 12.0 50 6 12° 40.50 34.43 MXH235 4.5 4.5 13.5 50 6 12° 55.50 47.18 MXH235 5 5.0 15.0 55 6 12° 42.50 36.13 MXH235 5.5 5.5 16.5 60 6 12° 55.50 47.18 MXH235 6 6.0 18.0 60 6 44.50 37.83 15% RABATT

MX240

▪ Verwirklichung von feinen und präzisen Oberflächen auf unlegierten und legierten Stählen | Réalisation d’usinages ultra précis dans des Aciers alliés / non alliés

7 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX240 0.3 0.3 1.2 45 4 12° 56.50 48.03 MX240 0.4 0.4 1.6 45 4 12° 56.50 48.03 MX240 0.5 0.5 2.0 45 4 12° 35.50 30.18 MX240 0.6 0.6 2.4 45 4 12° 32.50 27.63 MX240 0.7 0.7 2.8 45 4 12° 35.50 30.18 MX240 0.8 0.8 3.2 45 4 12° 35.50 30.18 MX240 0.9 0.9 3.6 45 4 12° 35.50 30.18 MX240 1 1.0 4.0 45 4 12° 32.50 27.63 MX240 1.1 1.1 4.4 45 4 12° 47.50 40.38 MX240 1.2 1.2 4.8 45 4 12° 39.50 33.58 MX240 1.3 1.3 5.2 45 4 12° 48.50 41.23 MX240 1.4 1.4 5.6 45 4 12° 48.50 41.23 MX240 1.5 1.5 6.0 45 4 12° 32.50 27.63 MX240 1.6 1.6 6.4 45 4 12° 48.50 41.23 MX240 1.7 1.7 6.8 45 4 12° 48.50 41.23 MX240 1.8 1.8 7.2 45 4 12° 39.50 33.58 MX240 1.9 1.9 7.6 45 4 12° 48.50 41.23 MX240 2 2.0 8.0 45 4 12° 32.50 27.63 MX240 2.1 2.1 8.4 45 4 12° 48.50 41.23 MX240 2.2 2.2 8.8 45 4 12° 48.50 41.23 MX240 2.3 2.3 9.2 45 4 12° 48.50 41.23 MX240 2.4 2.4 9.6 45 4 12° 48.50 41.23 MX240 2.5 2.5 10.0 45 4 12° 32.50 27.63 MX240 2.6 2.6 10.4 50 4 12° 55.50 47.18 MX240 2.7 2.7 10.8 50 4 12° 55.50 47.18 MX240 2.8 2.8 11.2 50 4 12° 55.50 47.18 MX240 2.9 2.9 11.6 50 4 12° 55.50 47.18 MX240 3 3.0 12.0 50 6 12° 40.50 34.43 MX240 3.1 3.1 12.4 50 6 12° 58.50 49.73 MX240 3.2 3.2 12.8 50 6 12° 58.50 49.73 MX240 3.3 3.3 13.2 50 6 12° 58.50 49.73 MX240 3.4 3.4 13.6 50 6 12° 58.50 49.73 MX240 3.5 3.5 14.0 50 6 12° 52.50 44.63 MX240 3.6 3.6 14.4 50 6 12° 58.50 49.73 MX240 3.7 3.7 14.8 50 6 12° 58.50 49.73 MX240 3.8 3.8 15.2 50 6 12° 58.50 49.73 MX240 3.9 3.9 15.6 50 6 12° 58.50 49.73 MX240 4 4.0 16.0 55 6 12° 43.50 36.98 MX240 4.1 4.1 16.4 55 6 12° 58.50 49.73 MX240 4.2 4.2 16.8 55 6 12° 58.50 49.73 MX240 4.3 4.3 17.2 55 6 12° 58.50 49.73 MX240 4.4 4.4 17.6 55 6 12° 58.50 49.73 MX240 4.5 4.5 18.0 55 6 12° 59.50 50.58 MX240 4.6 4.6 18.4 55 6 12° 67.00 56.95 MX240 4.7 4.7 18.8 55 6 12° 67.00 56.95 MX240 4.8 4.8 19.2 55 6 12° 67.00 56.95

▪ DC ≤ 2.0 Toleranz 0 /-0.01 | 2.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 15% RABATT

Fortsetzung auf der nächsten Seite | Suite à la page suivante

MX240

MXH240

▪ Für die Bearbeitung von hitzeresistenten Legierungen, wie auch für rostfreie Stähle und Titanlegierungen geeignet | Adaptée à l’usinage d’alliages résistants à la chaleur ainsi qu’aux aciers inoxydables et alliages de titane

▪ Geeignet für tiefe Bearbeitungen bei geringster Deflektion und guter Oberflächenqualität | Permet des usinages profonds avec un risque de déviation réduit et un bon état de surface

8 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX240 4.9 4.9 19.6 55 6 12° 67.00 56.95 MX240 5 5.0 20.0 60 6 12° 48.50 41.23 MX240 5.1 5.1 20.4 60 6 12° 67.00 56.95 MX240 5.2 5.2 20.8 60 6 12° 67.00 56.95 MX240 5.3 5.3 21.2 60 6 12° 67.00 56.95 MX240 5.4 5.4 21.6 60 6 12° 67.00 56.95 MX240 5.5 5.5 22.0 65 6 12° 59.50 50.58 MX240 5.6 5.6 22.4 65 6 12° 70.00 59.50 MX240 5.7 5.7 22.8 65 6 12° 70.00 59.50 MX240 5.8 5.8 23.2 65 6 12° 70.00 59.50 MX240 5.9 5.9 23.6 65 6 12° 70.00 59.50 MX240 6 6.0 24.0 65 6 – 50.50 42.93 MX240 7 7.0 28.0 90 8 12° 129.50 110.08 MX240 8 8.0 32.0 90 8 – 118.00 100.30 MX240 9 9.0 36.0 100 10 12° 220.00 187.00 MX240 10 10.0 40.0 100 10 – 129.50 110.08 MX240 12 12.0 48.0 105 12 – 220.00 187.00

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MXH240 0.3 0.3 1.2 45 4 12° 62.50 53.13 MXH240 0.4 0.4 1.6 45 4 12° 62.50 53.13 MXH240 0.5 0.5 2.0 45 4 12° 39.50 33.58 MXH240 0.8 0.8 3.2 45 4 12° 40.50 34.43 MXH240 1 1.0 4.0 45 4 12° 35.50 30.18 MXH240 1.2 1.2 4.8 45 4 12° 42.50 36.13 MXH240 1.5 1.5 6.0 45 4 12° 35.50 30.18 MXH240 1.8 1.8 7.2 45 4 12° 42.50 36.13 MXH240 2 2.0 8.0 45 4 12° 35.50 30.18 MXH240 2.5 2.5 10.0 45 4 12° 35.50 30.18 MXH240 3 3.0 12.0 50 6 12° 47.50 40.38 MXH240 4 4.0 16.0 55 6 12° 47.50 40.38 MXH240 5 5.0 20.0 60 6 12° 58.50 49.73 MXH240 6 6.0 24.0 65 6 59.50 50.58

▪ DC < 0.5 Toleranz 0 /-0.01 | 0.5 ≤ DC ≤ 3.0 Toleranz 0 /-0.015

▪ 3.0 < DC < 6.0 Toleranz 0 /-0.02 | DC = 6.0 Toleranz -0.01 /-0.03 15% RABATT 15% RABATT

MX245

▪ Verwirklichung von feinen und präzisen Oberflächen auf unlegierten und legierten Stählen | Réalisation d’usinages ultra précis dans des aciers alliés / non alliés

9 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX245 0.3 0.3 1.5 45 4 12° 79.00 67.15 MX245 0.4 0.4 2.0 45 4 12° 79.00 67.15 MX245 0.5 0.5 2.5 45 4 12° 50.50 42.93 MX245 0.8 0.8 4.0 45 4 12° 50.50 42.93 MX245 1 1.0 5.0 45 4 12° 44.50 37.83 MX245 1.2 1.2 6.0 45 4 12° 50.50 42.93 MX245 1.5 1.5 7.5 45 4 12° 44.50 37.83 MX245 1.8 1.8 9.0 50 4 12° 50.50 42.93 MX245 2 2.0 10.0 50 4 12° 44.50 37.83 MX245 2.5 2.5 12.5 50 4 12° 44.50 37.83 MX245 3 3.0 15.0 55 6 12° 58.50 49.73 MX245 4 4.0 20.0 60 6 12° 62.50 53.13 MX245 5 5.0 25.0 65 6 12° 69.00 58.65 MX245 6 6.0 30.0 75 6 – 73.00 62.05 MX245 7 7.0 35.0 90 8 12° 146.50 124.53 MX245 8 8.0 40.0 90 8 – 129.50 110.08 MX245 9 9.0 45.0 100 10 12° 244.00 207.40 MX245 10 10.0 50.0 100 10 – 146.50 124.53 MX245 12 12.0 60.0 105 12 – 244.00 207.40

▪ DC ≤ 2.0 Toleranz 0 /-0.01 | 2.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 15% RABATT

MXH245

▪ DC < 0.5 Toleranz 0 /-0.01 | 0.5 ≤ DC ≤ 3.0 Toleranz 0 /-0.015

MX425

▪ Die Mugen-Premium-Beschichtung ermöglicht ein Fräsen in rostfreiem Stahl und Titan | Le revêtement Mugen apporte un plus important en résistance à la chaleur pour l’usinage des matériaux non ferreux et des alliages de titane

▪ Die hohe Schnittlänge von 5×D und 45° Drall reduzieren die Fräsdeflektion Longueur de coupe utile de 5×D avec un angle d’hélice de 45° pour réduire les déviations de la fraise

▪ 3.0 < DC < 6.0 Toleranz 0 /-0.02 | DC = 6.0 Toleranz -0.01 /-0.03

15% RABATT

10 PREALPINA SUISSE GmbH – 2023

▪ DC ≤ 3.0 Toleranz 0 /-0.01 | 3.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX425 1 1.0 1.0 45 4 12° 47.50 40.38 MX425 1.5 1.5 1.5 45 4 12° 47.50 40.38 MX425 2 2.0 2.0 45 4 12° 31.50 26.78 MX425 2.5 2.5 2.5 45 4 12° 31.50 26.78 MX425 3 3.0 3.0 45 6 12° 35.50 30.18 MX425 3.5 3.5 3.5 45 6 12° 65.00 55.25 MX425 4 4.0 4.0 45 6 12° 40.50 34.43 MX425 4.5 4.5 4.5 50 6 12° 78.00 66.30 MX425 5 5.0 5.0 50 6 12° 43.50 36.98 MX425 5.5 5.5 5.5 50 6 12° 80.00 68.00 MX425 6 6.0 6.0 50 6 – 46.50 39.53 MX425 8 8.0 8.0 65 8 – 117.00 99.45 MX425 10 10.0 10.0 75 10 – 134.50 114.33 MX425 12 12.0 12.0 80 12 – 202.00 171.70 15% RABATT Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MXH245 0.3 0.3 1.5 45 4 12° 87.00 73.95 MXH245 0.4 0.4 2.0 45 4 12° 87.00 73.95 MXH245 0.5 0.5 2.5 45 4 12° 54.50 46.33 MXH245 0.8 0.8 4.0 45 4 12° 54.50 46.33 MXH245 1 1.0 5.0 45 4 12° 48.50 41.23 MXH245 1.2 1.2 6.0 45 4 12° 54.50 46.33 MXH245 1.5 1.5 7.5 45 4 12° 48.50 41.23 MXH245 1.8 1.8 9.0 50 4 12° 54.50 46.33 MXH245 2 2.0 10.0 50 4 12° 48.50 41.23 MXH245 2.5 2.5 12.5 50 4 12° 48.50 41.23 MXH245 3 3.0 15.0 55 6 12° 65.00 55.25 MXH245 4 4.0 20.0 60 6 12° 68.00 57.80 MXH245 5 5.0 25.0 65 6 12° 76.00 64.60 MXH245 6 6.0 30.0 75 6 – 79.00 67.15

MX430

▪ Die Mugen-Beschichtung ermöglicht ein Fräsen in div. Materialien Le revêtement Mugen apporte un plus important en résistance à la chaleur pour l’usinage dans des matériaux variés

▪ DC ≤ 3.0 Toleranz 0 /-0.01 | 3.0 < DC < 6.0 Toleranz 0 /-0.015

MX435

▪ Die Mugen-Beschichtung ermöglicht ein Fräsen in div. Materialien Le revêtement Mugen apporte un plus important en résistance à la chaleur pour l’usinage dans des matériaux variés

▪ Die Schnittlänge von 2×D und 30° Drall erlaubt Nuten- und Umfangsfräsen | La longueur de coupe utile de 2×D avec une hélice de 30° permet d’usiner des contours et des rainures

▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03

11 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX430 1 1.0 2.0 45 4 12° 33.50 28.48 MX430 1.5 1.5 3.0 45 4 12° 33.50 28.48 MX430 2 2.0 4.0 45 4 12° 28.50 24.23 MX430 2.5 2.5 5.0 45 4 12° 28.50 24.23 MX430 3 3.0 6.0 45 6 12° 29.50 25.08 MX430 3.5 3.5 7.0 45 6 12° 53.50 45.48 MX430 4 4.0 8.0 45 6 12° 33.50 28.48 MX430 4.5 4.5 9.0 50 6 12° 62.50 53.13 MX430 5 5.0 10.0 50 6 12° 33.50 28.48 MX430 5.5 5.5 11.0 50 6 12° 62.50 53.13 MX430 6 6.0 12.0 50 6 – 39.50 33.58 MX430 8 8.0 16.0 65 8 – 84.00 71.40 MX430 10 10.0 20.0 75 10 – 113.00 96.05 MX430 12 12.0 24.0 80 12 – 153.50 130.48 15% RABATT

▪ DC ≤ 3.0 Toleranz 0 /-0.01 | 3.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz 0 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX435 1 1.0 3.0 45 4 12° 47.50 40.38 MX435 1.5 1.5 4.5 45 4 12° 47.50 40.38 MX435 2 2.0 6.0 45 4 12° 33.50 28.48 MX435 2.5 2.5 7.5 45 4 12° 33.50 28.48 MX435 3 3.0 9.0 45 6 12° 36.50 31.03 MX435 3.5 3.5 10.5 45 6 12° 67.00 56.95 MX435 4 4.0 12.0 50 6 12° 40.50 34.43 MX435 4.5 4.5 13.5 50 6 12° 80.00 68.00 MX435 5 5.0 15.0 55 6 12° 43.50 36.98 MX435 5.5 5.5 16.5 60 6 12° 84.00 71.40 MX435 6 6.0 18.0 60 6 – 42.50 36.13 MX435 8 8.0 24.0 65 8 – 110.00 93.50 MX435 10 10.0 30.0 75 10 – 129.50 110.08 MX435 12 12.0 36.0 80 12 – 183.50 155.98 15% RABATT

MX440

▪ Die Mugen-Beschichtung ermöglicht ein Fräsen in div. Materialien Le revêtement Mugen apporte un plus important en résistance à la chaleur pour l’usinage dans des matériaux variés

MX445

▪ Die Mugen-Beschichtung ermöglicht ein Fräsen in div. Materialien

Le revêtement Mugen apporte un plus important en résistance à la chaleur pour l’usinage dans des matériaux variés

▪ Realisiert höchste Effizienz, minimiert Vibration Minimise les vibrations pour une optimisation de l’usinage

▪ Die hohe Schnittlänge von 5×D und 45° Drall reduzieren die Fräsdeflektion Longueur utile de 5×D avec une hélice de 45° pour réduire les déviations de

12 PREALPINA SUISSE GmbH – 2023

▪ DC ≤ 2.0 Toleranz 0 /-0.01 | 2.0 < DC < 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX440 1 1.0 4.0 45 4 12° 50.50 42.93 MX440 1.5 1.5 6.0 45 4 12° 50.50 42.93 MX440 2 2.0 8.0 45 4 12° 41.50 35.28 MX440 2.5 2.5 10.0 45 4 12° 41.50 35.28 MX440 3 3.0 12.0 50 6 12° 44.50 37.83 MX440 3.5 3.5 14.0 50 6 12° 73.00 62.05 MX440 4 4.0 16.0 55 6 12° 47.50 40.38 MX440 4.5 4.5 18.0 55 6 12° 85.00 72.25 MX440 5 5.0 20.0 60 6 12° 51.50 43.78 MX440 5.5 5.5 22.0 65 6 12° 89.00 75.65 MX440 6 6.0 24.0 65 6 – 55.50 47.18 MX440 8 8.0 32.0 90 8 – 153.50 130.48 MX440 10 10.0 40.0 100 10 – 168.50 143.23 MX440 12 12.0 48.0 105 12 – 256.50 218.03 15% RABATT

la fraise ▪ DC ≤ 2.0 Toleranz 0 /-0.01 | 2.0 < DC< 6.0 Toleranz 0 /-0.015 ▪ DC = 6.0 Toleranz -0.01 /-0.025 | DC > 6.0 Toleranz -0.01 /-0.03 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MX445 1 1.0 5.0 45 4 12° 67.00 56.95 MX445 1.5 1.5 7.5 45 4 12° 67.00 56.95 MX445 2 2.0 10.0 45 4 12° 55.50 47.18 MX445 2.5 2.5 12.5 45 4 12° 55.50 47.18 MX445 3 3.0 15.0 50 6 12° 67.00 56.95 MX445 3.5 3.5 17.5 50 6 12° 89.00 75.65 MX445 4 4.0 20.0 55 6 12° 74.00 62.90 MX445 4.5 4.5 22.5 55 6 12° 100.00 85.00 MX445 5 5.0 25.0 60 6 12° 77.00 65.45 MX445 5.5 5.5 27.5 65 6 12° 109.00 92.65 MX445 6 6.0 30.0 65 6 – 84.00 71.40 MX445 8 8.0 40.0 90 8 – 183.50 155.98 MX445 10 10.0 50.0 100 10 – 208.00 176.80 MX445 12 12.0 60.0 105 12 – 292.50 248.63 15% RABATT

MSZ345

▪ Patentierter Spanbrecher und Schneidgeometrie für extrakurze Späne und reduzierte Vibrationen | Brise copeaux breveté et géométrie de coupe spéciale pour des copeaux très courts et moins de vibrations

▪ Effizientes Bohren, Ausräumen und Fräsen mit einem Werkzeug Percer et fraiser efficacement avec un seul outil

15% RABATT

13 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSZ345 1 1.0 1.5 45 4 9° 62.00 52.70 MSZ345 1.1 1.1 1.7 45 4 9° 90.00 76.50 MSZ345 1.2 1.2 1.8 45 4 9° 90.00 76.50 MSZ345 1.3 1.3 2.0 45 4 9° 90.00 76.50 MSZ345 1.4 1.4 2.1 45 4 9° 90.00 76.50 MSZ345 1.5 1.5 2.3 45 4 9° 62.00 52.70 MSZ345 1.6 1.6 2.4 45 4 9° 90.00 76.50 MSZ345 1.7 1.7 2.6 45 4 9° 90.00 76.50 MSZ345 1.8 1.8 2.7 45 4 9° 90.00 76.50 MSZ345 1.9 1.9 2.9 45 4 9° 90.00 76.50 MSZ345 2 2.0 3.0 45 4 9° 60.00 51.00 MSZ345 2.1 2.1 3.2 45 4 9° 87.00 73.95 MSZ345 2.2 2.2 3.3 45 4 9° 87.00 73.95 MSZ345 2.3 2.3 3.5 45 4 9° 87.00 73.95 MSZ345 2.4 2.4 3.6 45 4 9° 87.00 73.95 MSZ345 2.5 2.5 3.8 45 4 9° 60.00 51.00 MSZ345 2.6 2.6 3.9 45 4 9° 103.50 87.98 MSZ345 2.7 2.7 4.1 45 4 9° 103.50 87.98 MSZ345 2.8 2.8 4.2 45 4 9° 103.50 87.98 MSZ345 2.9 2.9 4.5 45 4 9° 103.50 87.98 MSZ345 3 3.0 6.0 50 6 9° 74.50 63.33 MSZ345 3.1 3.1 6.2 50 6 9° 113.00 96.05 MSZ345 3.2 3.2 6.4 50 6 9° 113.00 96.05 MSZ345 3.3 3.3 6.6 50 6 9° 113.00 96.05 MSZ345 3.4 3.4 6.8 50 6 9° 113.00 96.05 MSZ345 3.5 3.5 7.0 50 6 9° 113.00 96.05 MSZ345 3.6 3.6 7.2 50 6 9° 113.00 96.05 MSZ345 3.7 3.7 7.4 50 6 9° 113.00 96.05 MSZ345 3.8 3.8 7.6 50 6 9° 113.00 96.05 MSZ345 3.9 3.9 7.8 50 6 9° 113.00 96.05 MSZ345 4 4.0 8.0 50 6 9° 77.50 65.88 MSZ345 4.1 4.1 8.2 50 6 9° 119.50 101.58 MSZ345 4.2 4.2 8.4 50 6 9° 119.50 101.58 MSZ345 4.3 4.3 8.6 50 6 9° 119.50 101.58 MSZ345 4.4 4.4 8.8 50 6 9° 119.50 101.58 MSZ345 4.5 4.5 9.0 50 6 9° 119.50 101.58 MSZ345 4.6 4.6 9.2 50 6 9° 119.50 101.58 MSZ345 4.7 4.7 9.4 50 6 9° 119.50 101.58 MSZ345 4.8 4.8 9.6 50 6 9° 119.50 101.58 MSZ345 4.9 4.9 9.8 50 6 9° 119.50 101.58 MSZ345 5 5.0 10.0 50 6 9° 83.50 70.98 MSZ345 5.1 5.1 10.2 55 6 9° 126.00 107.10 MSZ345 5.2 5.2 10.4 55 6 9° 126.00 107.10 MSZ345 5.3 5.3 10.6 55 6 9° 126.00 107.10 MSZ345 5.4 5.4 10.8 55 6 9° 126.00 107.10 MSZ345 5.5 5.5 11.2 55 6 9° 126.00 107.10 MSZ345 5.6 5.6 11.4 55 6 9° 126.00 107.10

▪ DC < 6.0 Toleranz 0 /-0.02 | DC ≥ 6.0 Toleranz -0.015 /-0.035 Fortsetzung

nächsten Seite | Suite à la page suivante

auf der

MSZ345

15% RABATT

Ab Durchmesser 8.1 bis 12.0 jeder Zehntel ab Werk verfügbar (Preis/Lieferzeit auf Anfrage).

Du diamètre 8.1 au diamètre 12.0 mm, disponibles tous les 0.1 mm chez notre fournisseur (prix et délai de livraison sur demande).

MSX440

▪ Sehr gut geeignet zum Schruppen und Vorschlichten

Pour usinages d’ébauche et de semi-finition

▪ Das Schneidendesign mit ungleicher Geometrie reduziert Vibrationen

La conception avec géométrie de coupe inégale réduit les vibrations

▪ Sehr gut geeignet für hohes Zerspanungsvolumen | Gros volume de copeaux

14 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSZ345 5.7 5.7 11.6 55 6 9° 126.00 107.10 MSZ345 5.8 5.8 12.0 55 6 9° 126.00 107.10 MSZ345 5.9 5.9 12.4 55 6 9° 126.00 107.10 MSZ345 6 6.0 13.0 55 6 – 86.50 73.53 MSZ345 6.1 6.1 13.0 65 8 9° 178.50 151.73 MSZ345 6.2 6.2 13.0 65 8 9° 178.50 151.73 MSZ345 6.3 6.3 13.5 65 8 9° 178.50 151.73 MSZ345 6.4 6.4 13.5 65 8 9° 178.50 151.73 MSZ345 6.5 6.5 13.5 65 8 9° 178.50 151.73 MSZ345 6.6 6.6 14.0 65 8 9° 178.50 151.73 MSZ345 6.7 6.7 14.0 65 8 9° 178.50 151.73 MSZ345 6.8 6.8 15.0 65 8 9° 178.50 151.73 MSZ345 6.9 6.9 15.0 65 8 9° 178.50 151.73 MSZ345 7 7.0 16.0 65 8 9° 124.50 105.83 MSZ345 7.1 7.1 16.0 65 8 9° 178.50 151.73 MSZ345 7.2 7.2 16.0 65 8 9° 178.50 151.73 MSZ345 7.3 7.3 16.0 65 8 9° 178.50 151.73 MSZ345 7.4 7.4 16.0 65 8 9° 178.50 151.73 MSZ345 7.5 7.5 16.0 65 8 9° 178.50 151.73 MSZ345 7.6 7.6 17.0 65 8 9° 178.50 151.73 MSZ345 7.7 7.7 17.0 65 8 9° 178.50 151.73 MSZ345 7.8 7.8 17.0 65 8 9° 178.50 151.73 MSZ345 7.9 7.9 17.0 65 8 9° 178.50 151.73 MSZ345 8 8.0 19.0 65 8 – 124.50 105.83 MSZ345 9 9.0 19.0 75 10 9° 144.50 122.83 MSZ345 10 10.0 22.0 75 10 – 144.50 122.83 MSZ345 11 11.0 22.0 80 12 9° 212.00 180.20 MSZ345 12 12.0 26.0 80 12 – 212.00 180.20

▪ DC ≤ 6.0 Toleranz 0 /-0.03 ▪ 6.0 < DC ≤ 10.0 Toleranz 0 /-0.04 ▪ DC > 10.0 Toleranz 0 /-0.05 Artikel-Nr. | Réf. d’article DC RE APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSX440 3 3.0 0.2 8.0 55 6 12° 67.00 56.95 MSX440 4 4.0 0.2 11.0 55 6 12° 71.00 60.35 MSX440 5 5.0 0.2 13.0 55 6 12° 76.50 65.03 MSX440 6 6.0 0.3 13.0 55 6 – 77.50 65.88 MSX440 7 7.0 0.3 19.0 60 8 12° 112.00 95.20 MSX440 8 8.0 0.3 19.0 60 8 112.00 95.20 MSX440 9 9.0 0.3 22.0 70 10 12° 130.50 110.93 MSX440 10 10.0 0.3 22.0 70 10 130.50 110.93 MSX440 11 11.0 0.3 26.0 80 12 12° 214.00 181.90 MSX440 12 12.0 0.3 26.0 80 12 193.50 164.48 15% RABATT

MSXH440R

▪ Mugen-Premium-Beschichtung mit hoher Hitzebeständigkeit für mehr Haltbarkeit der Schneidkanten | Le revêtement Mugen-Premium apporte un plus important en résistance à la chaleur et améliore la durée de vie de l’outil

▪ Das Schneidendesign mit ungleicher Geometrie reduziert Vibrationen La conception avec géométrie de coupe inégale réduit les vibrations

▪ DC < 6.0 Toleranz 0/-0.02 | DC ≥ 6.0 Toleranz -0.01/-0.03

▪ RE Toleranz ± 0.015

15 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC RE APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSXH440R 3xR0.3 3.0 0.3 8.0 60 6 12° 66.00 56.10 MSXH440R 3xR0.5 0.5 66.00 56.10 MSXH440R 4xR0.3 4.0 0.3 11.0 60 6 12° 72.00 61.20 MSXH440R 4xR0.5 0.5 72.00 61.20 MSXH440R 4xR1 1.0 72.00 61.20 MSXH440R 5xR0.3 5.0 0.3 13.0 60 6 12° 74.50 63.33 MSXH440R 5xR0.5 0.5 74.50 63.33 MSXH440R 5xR1 1.0 74.50 63.33 MSXH440R 6xR0.5 6.0 0.5 13.0 60 6 77.00 65.45 MSXH440R 6xR1 1.0 77.00 65.45 MSXH440R 8xR0.5 8.0 0.5 19.0 65 8 129.00 109.65 MSXH440R 8xR1 1.0 129.00 109.65 MSXH440R 10xR0.5 10.0 0.5 22.0 75 10 149.50 127.08 MSXH440R 10xR1 1.0 149.50 127.08 MSXH440R 10xR2 2.0 149.50 127.08 MSXH440R 10xR3 3.0 149.50 127.08 MSXH440R 12xR0.5 12.0 0.5 26.0 80 12 197.00 167.45 MSXH440R 12xR1 1.0 197.00 167.45 MSXH440R 12xR2 2.0 197.00 167.45 15% RABATT

MHRSH430RSF

▪ MUGEN COATING PREMIUM Plus für gehärtete Stähle mit starkem Rückseitenkegel reduziert das Rattern und sorgt für lange Standzeiten und hervorragende Oberflächengüte. | MUGEN COATING PREMIUM Plus pour les aciers trempés avec une forte conicité arrière réduisant le broutage pour obtenir une longue durée de vie de l’outil et une excellente surface de finition.

▪ Wiper Geometrie | Wiper géométrie

▪ 4-Schneiden-Fräser für die Hochleistungsbearbeitung | Fraise à 4 dents spécialisée dans l’usinage à haut rendement

▪ DCON Toleranz -0.001 / -0.003 | RE Toleranz ± 0.003

▪ DC ≤0.15 Toleranz 0 / -0.007 | 0.15 < DC ≤ 2 Toleranz 0 / -0.01

15% RABATT

16 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MHRSH430RSF 0.1xR0.01x0.2 0.1 0.085 0.01 0.08 0.2 35 4 15° 124.00 105.40 MHRSH430RSF 0.1xR0.01x0.3 0.3 124.00 105.40 MHRSH430RSF 0.15xR0.01x0.3 0.15 0.135 0.01 0.12 0.3 35 4 15° 124.00 105.40 MHRSH430RSF 0.15xR0.01x0.5 0.5 124.00 105.40 MHRSH430RSF 0.15xR0.02x0.3 0.02 0.3 124.00 105.40 MHRSH430RSF 0.15xR0.02x0.5 0.5 124.00 105.40 MHRSH430RSF 0.2xR0.02x0.3 0.2 0.18 0.02 0.15 0.3 35 4 15° 124.00 105.40 MHRSH430RSF 0.2xR0.02x0.5 0.5 124.00 105.40 MHRSH430RSF 0.2xR0.02x0.75 0.75 124.00 105.40 MHRSH430RSF 0.2xR0.02x1 1.0 124.00 105.40 MHRSH430RSF 0.2xR0.05x0.3 0.05 0.3 124.00 105.40 MHRSH430RSF 0.2xR0.05x0.5 0.5 124.00 105.40 MHRSH430RSF 0.2xR0.05x0.75 0.75 124.00 105.40 MHRSH430RSF 0.2xR0.05x1 1.0 124.00 105.40 MHRSH430RSF 0.3xR0.02x0.5 0.3 0.28 0.02 0.25 0.5 35 4 15° 124.00 105.40 MHRSH430RSF 0.3xR0.02x0.75 0.75 124.00 105.40 MHRSH430RSF 0.3xR0.02x1 1.0 124.00 105.40 MHRSH430RSF 0.3xR0.02x1.5 1.5 124.00 105.40 MHRSH430RSF 0.3xR0.05x0.5 0.05 0.5 124.00 105.40 MHRSH430RSF 0.3xR0.05x0.75 0.75 124.00 105.40 MHRSH430RSF 0.3xR0.05x1 1.0 124.00 105.40 MHRSH430RSF 0.3xR0.05x1.5 1.5 124.00 105.40 MHRSH430RSF 0.4xR0.02x0.5 0.4 0.37 0.02 0.3 0.5 35 4 15° 80.00 68.00 MHRSH430RSF 0.4xR0.02x1 1.0 80.00 68.00 MHRSH430RSF 0.4xR0.02x1.5 1.5 80.00 68.00 MHRSH430RSF 0.4xR0.02x2 2.0 80.00 68.00 MHRSH430RSF 0.4xR0.05x0.5 0.05 0.5 80.00 68.00 MHRSH430RSF 0.4xR0.05x1 1.0 80.00 68.00 MHRSH430RSF 0.4xR0.05x1.5 1.5 80.00 68.00 MHRSH430RSF 0.4xR0.05x2 2.0 80.00 68.00 MHRSH430RSF 0.5xR0.02x1 0.5 0.46 0.02 0.4 1.0 35 4 15° 64.50 54.83 MHRSH430RSF 0.5xR0.02x1.5 1.5 64.50 54.83 MHRSH430RSF 0.5xR0.02x2 2.0 64.50 54.83 MHRSH430RSF 0.5xR0.02x2.5 2.5 64.50 54.83 MHRSH430RSF 0.5xR0.05x1 0.05 1.0 64.50 54.83 MHRSH430RSF 0.5xR0.05x1.5 1.5 64.50 54.83 MHRSH430RSF 0.5xR0.05x2 2.0 64.50 54.83 MHRSH430RSF 0.5xR0.05x2.5 2.5 64.50 54.83 MHRSH430RSF 0.5xR0.1x1 0.1 1.0 64.50 54.83 MHRSH430RSF 0.5xR0.1x1.5 1.5 64.50 54.83 MHRSH430RSF 0.5xR0.1x2 2.0 64.50 54.83 MHRSH430RSF 0.5xR0.1x2.5 2.5 64.50 54.83 MHRSH430RSF 0.6xR0.02x1 0.6 0.56 0.02 0.5 1.0 35 4 15° 64.50 54.83 MHRSH430RSF 0.6xR0.02x2 2.0 64.50 54.83 MHRSH430RSF 0.6xR0.02x3 3.0 64.50 54.83 MHRSH430RSF 0.6xR0.05x1 0.05 1.0 64.50 54.83

NEUER ARTIKEL NOUVEL ARTICLE

Fortsetzung auf der nächsten Seite | Suite à la page suivante

MHRSH430RSF NEUER ARTIKEL NOUVEL ARTICLE

17 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MHRSH430RSF 0.6xR0.05x2 0.6 0.56 0.05 0.5 2.0 35 4 15° 64.50 54.83 MHRSH430RSF 0.6xR0.05x3 3.0 64.50 54.83 MHRSH430RSF 0.6xR0.1x1 0.1 1.0 64.50 54.83 MHRSH430RSF 0.6xR0.1x2 2.0 64.50 54.83 MHRSH430RSF 0.6xR0.1x3 3.0 64.50 54.83 MHRSH430RSF 0.8xR0.02x2 0.8 0.76 0.02 0.65 2.0 35 4 15° 72.00 61.20 MHRSH430RSF 0.8xR0.02x3 3.0 72.00 61.20 MHRSH430RSF 0.8xR0.02x4 4.0 72.00 61.20 MHRSH430RSF 0.8xR0.05x2 0.05 2.0 72.00 61.20 MHRSH430RSF 0.8xR0.05x3 3.0 72.00 61.20 MHRSH430RSF 0.8xR0.05x4 4.0 72.00 61.20 MHRSH430RSF 0.8xR0.1x2 0.1 2.0 72.00 61.20 MHRSH430RSF 0.8xR0.1x3 3.0 72.00 61.20 MHRSH430RSF 0.8xR0.1x4 4.0 72.00 61.20 MHRSH430RSF 0.8xR0.2x2 0.2 2.0 72.00 61.20 MHRSH430RSF 0.8xR0.2x3 3.0 72.00 61.20 MHRSH430RSF 0.8xR0.2x4 4.0 72.00 61.20 MHRSH430RSF 1xR0.02x2 1.0 0.95 0.02 0.8 2.0 35 4 15° 65.50 55.68 MHRSH430RSF 1xR0.02x3 3.0 65.50 55.68 MHRSH430RSF 1xR0.02x4 4.0 65.50 55.68 MHRSH430RSF 1xR0.02x5 5.0 40 65.50 55.68 MHRSH430RSF 1xR0.05x2 0.05 2.0 35 65.50 55.68 MHRSH430RSF 1xR0.05x3 3.0 65.50 55.68 MHRSH430RSF 1xR0.05x4 4.0 65.50 55.68 MHRSH430RSF 1xR0.05x5 5.0 40 65.50 55.68 MHRSH430RSF 1xR0.1x2 0.1 2.0 35 65.50 55.68 MHRSH430RSF 1xR0.1x3 3.0 65.50 55.68 MHRSH430RSF 1xR0.1x4 4.0 65.50 55.68 MHRSH430RSF 1xR0.1x5 5.0 40 65.50 55.68 MHRSH430RSF 1xR0.2x2 0.2 2.0 35 65.50 55.68 MHRSH430RSF 1xR0.2x3 3.0 65.50 55.68 MHRSH430RSF 1xR0.2x4 4.0 65.50 55.68 MHRSH430RSF 1xR0.2x5 5.0 40 65.50 55.68 MHRSH430RSF 1xR0.3x2 0.3 2.0 35 65.50 55.68 MHRSH430RSF 1xR0.3x3 3.0 65.50 55.68 MHRSH430RSF 1xR0.3x4 4.0 65.50 55.68 MHRSH430RSF 1xR0.3x5 5.0 40 65.50 55.68 MHRSH430RSF 1.5xR0.02x3 1.5 1.43 0.02 1.2 3.0 35 4 15° 68.50 58.23 MHRSH430RSF 1.5xR0.02x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.02x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.02x8 8.0 73.00 62.05 MHRSH430RSF 1.5xR0.05x3 0.05 3.0 35 68.50 58.23 MHRSH430RSF 1.5xR0.05x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.05x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.05x8 8.0 73.00 62.05 MHRSH430RSF 1.5xR0.1x3 0.1 3.0 35 68.50 58.23 MHRSH430RSF 1.5xR0.1x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.1x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.1x8 8.0 73.00 62.05 MHRSH430RSF 1.5xR0.2x3 0.2 3.0 35 68.50 58.23 MHRSH430RSF 1.5xR0.2x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.2x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.2x8 8.0 73.00 62.05 MHRSH430RSF 1.5xR0.3x3 0.3 3.0 35 68.50 58.23 MHRSH430RSF 1.5xR0.3x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.3x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.3x8 8.0 73.00 62.05 MHRSH430RSF 1.5xR0.5x3 0.5 3.0 35 68.50 58.23 MHRSH430RSF 1.5xR0.5x4 4.0 68.50 58.23 MHRSH430RSF 1.5xR0.5x6 6.0 40 68.50 58.23 MHRSH430RSF 1.5xR0.5x8 8.0 73.00 62.05

15% RABATT Fortsetzung auf der nächsten Seite | Suite à la page suivante

MHRSH430RSF NEUER ARTIKEL NOUVEL ARTICLE

18 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MHRSH430RSF 2xR0.02x4 2.0 1.91 0.02 1.6 4.0 35 4 15° 68.50 58.23 MHRSH430RSF 2xR0.02x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.02x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.02x10 10.0 73.00 62.05 MHRSH430RSF 2xR0.05x4 0.05 4.0 35 68.50 58.23 MHRSH430RSF 2xR0.05x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.05x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.05x10 10.0 73.00 62.05 MHRSH430RSF 2xR0.1x4 0.1 4.0 35 68.50 58.23 MHRSH430RSF 2xR0.1x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.1x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.1x10 10.0 73.00 62.05 MHRSH430RSF 2xR0.2x4 0.2 4.0 35 68.50 58.23 MHRSH430RSF 2xR0.2x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.2x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.2x10 10.0 73.00 62.05 MHRSH430RSF 2xR0.3x4 0.3 4.0 35 68.50 58.23 MHRSH430RSF 2xR0.3x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.3x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.3x10 10.0 73.00 62.05 MHRSH430RSF 2xR0.5x4 0.5 4.0 35 68.50 58.23 MHRSH430RSF 2xR0.5x6 6.0 68.50 58.23 MHRSH430RSF 2xR0.5x8 8.0 40 73.00 62.05 MHRSH430RSF 2xR0.5x10 10.0 73.00 62.05 MHRSH430RSF 3xR0.05x4 3.0 2.85 0.05 2.5 4.0 45 6 15° 76.00 64.60 MHRSH430RSF 3xR0.05x6 6.0 76.00 64.60 MHRSH430RSF 3xR0.05x8 8.0 76.00 64.60 MHRSH430RSF 3xR0.05x10 10.0 50 84.50 71.83 MHRSH430RSF 3xR0.05x12 12.0 84.50 71.83 MHRSH430RSF 3xR0.05x15 15.0 55 93.50 79.48 MHRSH430RSF 3xR0.1x4 0.1 4.0 45 76.00 64.60 MHRSH430RSF 3xR0.1x6 6.0 76.00 64.60 MHRSH430RSF 3xR0.1x8 8.0 76.00 64.60 MHRSH430RSF 3xR0.1x10 10.0 50 84.50 71.83 MHRSH430RSF 3xR0.1x12 12.0 84.50 71.83 MHRSH430RSF 3xR0.1x15 15.0 55 93.50 79.48 MHRSH430RSF 3xR0.2x4 0.2 4.0 45 76.00 64.60 MHRSH430RSF 3xR0.2x6 6.0 76.00 64.60 MHRSH430RSF 3xR0.2x8 8.0 76.00 64.60 MHRSH430RSF 3xR0.2x10 10.0 50 84.50 71.83 MHRSH430RSF 3xR0.2x12 12.0 84.50 71.83 MHRSH430RSF 3xR0.2x15 15.0 55 93.50 79.48 MHRSH430RSF 3xR0.3x4 0.3 4.0 45 76.00 64.60 MHRSH430RSF 3xR0.3x6 6.0 76.00 64.60 MHRSH430RSF 3xR0.3x8 8.0 76.00 64.60 MHRSH430RSF 3xR0.3x10 10.0 50 84.50 71.83 MHRSH430RSF 3xR0.3x12 12.0 84.50 71.83 MHRSH430RSF 3xR0.3x15 15.0 55 93.50 79.48 MHRSH430RSF 3xR0.5x4 0.5 4.0 45 76.00 64.60 MHRSH430RSF 3xR0.5x6 6.0 76.00 64.60 MHRSH430RSF 3xR0.5x8 8.0 76.00 64.60 MHRSH430RSF 3xR0.5x10 10.0 50 84.50 71.83 MHRSH430RSF 3xR0.5x12 12.0 84.50 71.83 MHRSH430RSF 3xR0.5x15 15.0 55 93.50 79.48 MHRSH430RSF 4xR0.1x8 4.0 3.8 0.1 3.2 8.0 45 6 15° 104.00 88.40 MHRSH430RSF 4xR0.1x12 12.0 50 104.00 88.40 MHRSH430RSF 4xR0.1x16 16.0 55 104.00 88.40 MHRSH430RSF 4xR0.1x20 20.0 116.50 99.03 15% RABATT Fortsetzung auf der nächsten Seite | Suite à la page suivante

MHRSH430RSF NEUER ARTIKEL NOUVEL ARTICLE

19 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MHRSH430RSF 4xR0.2x8 4.0 3.8 0.2 3.2 8.0 45 6 15° 104.00 88.40 MHRSH430RSF 4xR0.2x12 12.0 50 104.00 88.40 MHRSH430RSF 4xR0.2x16 16.0 55 104.00 88.40 MHRSH430RSF 4xR0.2x20 20.0 116.50 99.03 MHRSH430RSF 4xR0.3x8 0.3 8.0 45 104.00 88.40 MHRSH430RSF 4xR0.3x12 12.0 50 104.00 88.40 MHRSH430RSF 4xR0.3x16 16.0 55 104.00 88.40 MHRSH430RSF 4xR0.3x20 20.0 116.50 99.03 MHRSH430RSF 4xR0.5x8 0.5 8.0 45 104.00 88.40 MHRSH430RSF 4xR0.5x12 12.0 50 104.00 88.40 MHRSH430RSF 4xR0.5x16 16.0 55 104.00 88.40 MHRSH430RSF 4xR0.5x20 20.0 116.50 99.03 MHRSH430RSF 5xR0.1x15 5.0 4.75 0.1 4.0 15.0 50 6 15° 146.00 124.10 MHRSH430RSF 5xR0.1x20 20.0 55 146.00 124.10 MHRSH430RSF 5xR0.2x15 0.2 15.0 50 146.00 124.10 MHRSH430RSF 5xR0.2x20 20.0 55 146.00 124.10 MHRSH430RSF 5xR0.3x15 0.3 15.0 50 146.00 124.10 MHRSH430RSF 5xR0.3x20 20.0 55 146.00 124.10 MHRSH430RSF 5xR0.5x15 0.5 15.0 50 146.00 124.10 MHRSH430RSF 5xR0.5x20 20.0 55 146.00 124.10 MHRSH430RSF 6xR0.1x12 6.0 5.7 0.1 5.0 12.0 45 6 –106.00 90.10 MHRSH430RSF 6xR0.1x18 18.0 50 131.00 111.35 MHRSH430RSF 6xR0.1x24 24.0 60 131.00 111.35 MHRSH430RSF 6xR0.1x30 30.0 65 131.00 111.35 MHRSH430RSF 6xR0.2x12 0.2 12.0 45 106.00 90.10 MHRSH430RSF 6xR0.2x18 18.0 50 131.00 111.35 MHRSH430RSF 6xR0.2x24 24.0 60 131.00 111.35 MHRSH430RSF 6xR0.2x30 30.0 65 131.00 111.35 MHRSH430RSF 6xR0.3x12 0.3 12.0 45 106.00 90.10 MHRSH430RSF 6xR0.3x18 18.0 50 131.00 111.35 MHRSH430RSF 6xR0.3x24 24.0 60 131.00 111.35 MHRSH430RSF 6xR0.3x30 30.0 65 131.00 111.35 MHRSH430RSF 6xR0.5x12 0.5 12.0 45 106.00 90.10 MHRSH430RSF 6xR0.5x18 18.0 50 131.00 111.35 MHRSH430RSF 6xR0.5x24 24.0 60 131.00 111.35 MHRSH430RSF 6xR0.5x30 30.0 65 131.00 111.35 MHRSH430RSF 6xR1x12 1.0 12.0 45 106.00 90.10 MHRSH430RSF 6xR1x18 18.0 50 131.00 111.35 MHRSH430RSF 6xR1x24 24.0 60 131.00 111.35 MHRSH430RSF 6xR1x30 30.0 65 131.00 111.35

15% RABATT

NEUER ARTIKEL NOUVEL ARTICLE

▪ Ungleiche Nutenteilung und Drallwinkel minimieren Rattermarken und realisieren eine hocheffiziente Bearbeitung | Le pas irrégulier des rainures et l’angle d’hélice minimisent les marques de broutage et permettent un usinage très efficace

▪ Eine neu entwickelte Schneidkante ermöglicht die multifunktionale Bearbeitung von Umfang-, Nuten- und Bohrfräsen in Edelstählen

Une arête de coupe nouvellement développée permet l’usinage multifonctionnel des fraisages périphériques, des rainures et des perçages dans les aciers inoxydables

20 PREALPINA SUISSE GmbH – 2023

MSUSZ440

▪ DC Toleranz 0/-0.01 ▪ DCON Toleranz -0.001 / -0.003 Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSUSZ440 1x2 1.0 2.0 50 4 12° 52.00 44.20 MSUSZ440 1x3 3.0 53.50 45.48 MSUSZ440 1.1x2.2 1.1 2.2 50 4 12° 61.50 52.28 MSUSZ440 1.2x2.4 1.2 2.4 50 4 12° 61.50 52.28 MSUSZ440 1.3x2.6 1.3 2.6 50 4 12° 61.50 52.28 MSUSZ440 1.4x2.8 1.4 2.8 50 4 12° 61.50 52.28 MSUSZ440 1.5x3 1.5 3.0 50 4 12° 61.50 52.28 MSUSZ440 1.5x4.5 4.5 65.50 55.68 MSUSZ440 1.6x3.2 1.6 3.2 50 6 12° 67.50 57.38 MSUSZ440 1.7x3.4 1.7 3.4 50 6 12° 67.50 57.38 MSUSZ440 1.8x3.6 1.8 3.6 50 6 12° 67.50 57.38 MSUSZ440 1.9x3.8 1.9 3.8 50 6 12° 67.50 57.38 MSUSZ440 2x4 2.0 4.0 50 6 12° 67.50 57.38 MSUSZ440 2x6 6.0 60 72.00 61.20 MSUSZ440 2.1x4.2 2.1 4.2 50 6 12° 67.50 57.38 MSUSZ440 2.2x4.4 2.2 4.4 50 6 12° 67.50 57.38 MSUSZ440 2.3x4.6 2.3 4.6 50 6 12° 67.50 57.38 MSUSZ440 2.4x4.8 2.4 4.8 50 6 12° 67.50 57.38 MSUSZ440 2.5x5 2.5 5.0 50 6 12° 67.50 57.38 MSUSZ440 2.5x7.5 7.5 60 73.00 62.05 MSUSZ440 2.6x5.2 2.6 5.2 50 6 12° 67.50 57.38 MSUSZ440 2.7x5.4 2.7 5.4 50 6 12° 67.50 57.38 MSUSZ440 2.8x5.6 2.8 5.6 50 6 12° 67.50 57.38 MSUSZ440 2.9x5.8 2.9 5.8 50 6 12° 67.50 57.38 MSUSZ440 3x6 3.0 6.0 50 6 12° 67.50 57.38 MSUSZ440 3x9 9.0 60 72.00 61.20 MSUSZ440 3.1x6.2 3.1 6.2 50 6 12° 71.00 60.35 MSUSZ440 3.2x6.4 3.2 6.4 50 6 12° 71.00 60.35 MSUSZ440 3.3x6.6 3.3 6.6 50 6 12° 71.00 60.35 MSUSZ440 3.4x6.8 3.4 6.8 50 6 12° 71.00 60.35 MSUSZ440 3.5x7 3.5 7.0 50 6 12° 71.00 60.35 MSUSZ440 3.5x10.5 10.5 60 6 76.00 64.60 MSUSZ440 3.6x7.2 3.6 7.2 50 6 12° 71.00 60.35 MSUSZ440 3.7x7.4 3.7 7.4 50 6 12° 71.00 60.35 MSUSZ440 3.8x7.6 3.8 7.6 50 6 12° 71.00 60.35 MSUSZ440 3.9x7.8 3.9 7.8 50 6 12° 71.00 60.35 MSUSZ440 4x8 4.0 8.0 50 6 12° 71.00 60.35 MSUSZ440 4x12 12.0 60 6 75.00 63.75 MSUSZ440 4.1x8.2 4.1 8.2 50 6 12° 75.00 63.75 MSUSZ440 4.2x8.4 4.2 8.4 50 6 12° 75.00 63.75 MSUSZ440 4.3x8.6 4.3 8.6 50 6 12° 75.00 63.75 MSUSZ440 4.4x8.8 4.4 8.8 50 6 12° 75.00 63.75 MSUSZ440 4.5x9 4.5 9.0 50 6 12° 75.00 63.75 MSUSZ440 4.5x13.5 13.5 60 6 81.00 68.85

15% RABATT Fortsetzung auf der nächsten Seite | Suite à la page suivante

MSUSZ440

MSUSZ440-LN

▪ Eine neu entwickelte Schneidkante ermöglicht die multifunktionale Bearbeitung von Umfang-, Nuten- und Bohrfräsen in Edelstählen

Une arête de coupe nouvellement développée permet l’usinage multifonctionnel des fraisages périphériques, des rainures et des perçages dans les aciers inoxydables

▪ DCON Toleranz -0.001/-0.003

▪ DC Toleranz 0/-0.01

Fortsetzung auf der nächsten Seite | Suite à la page suivante

15% RABATT

21 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSUSZ440 4.6x9.2 4.6 9.2 50 6 12° 75.00 63.75 MSUSZ440 4.7x9.4 4.7 9.4 50 6 12° 75.00 63.75 MSUSZ440 4.8x9.6 4.8 9.6 50 6 12° 75.00 63.75 MSUSZ440 4.9x9.8 4.9 9.8 50 6 12° 75.00 63.75 MSUSZ440 5x10 5.0 10.0 50 6 12° 75.00 63.75 MSUSZ440 5x15 15.0 60 6 12° 81.00 68.85 MSUSZ440 5.1x10.2 5.1 10.2 50 6 12° 82.00 69.70 MSUSZ440 5.2x10.4 5.2 10.4 50 6 12° 82.00 69.70 MSUSZ440 5.3x10.6 5.3 10.6 50 6 12° 82.00 69.70 MSUSZ440 5.4x10.8 5.4 10.8 50 6 12° 82.00 69.70 MSUSZ440 5.5x11 5.5 11.0 50 6 12° 82.00 69.70 MSUSZ440 5.5x16.5 16.5 60 6 87.50 74.38 MSUSZ440 5.6x11.2 5.6 11.2 50 6 12° 82.00 69.70 MSUSZ440 5.7x11.4 5.7 11.4 50 6 12° 82.00 69.70 MSUSZ440 5.8x11.6 5.8 11.6 50 6 12° 82.00 69.70 MSUSZ440 5.9x11.8 5.9 11.8 50 6 12° 82.00 69.70 MSUSZ440 6x12 6.0 12.0 60 6 –78.00 66.30 MSUSZ440 6x18 18.0 6 82.00 69.70 15% RABATT

Artikel-Nr. | Réf. d’article DC APMX LU DN OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSUSZ440-LN 1x1.5x3 1.0 1.5 3.0 0.95 50 4 12° 52.50 44.63 MSUSZ440-LN 1x1.5x4 4.0 53.50 45.48 MSUSZ440-LN 1x1.5x5 5.0 55.50 47.18 MSUSZ440-LN 1.5x2.3x4.5 1.5 2.3 4.5 1.45 50 4 12° 61.50 52.28 MSUSZ440-LN 1.5x2.3x6 6.0 64.50 54.83 MSUSZ440-LN 1.5x2.3x7.5 7.5 67.50 57.38 MSUSZ440-LN 2x3x6 2.0 3.0 6.0 1.94 50 6 12° 67.50 57.38 MSUSZ440-LN 2x3x8 8.0 71.00 60.35 MSUSZ440-LN 2x3x10 10.0 74.00 62.90 MSUSZ440-LN 2.5x3.8x7.5 2.5 3.8 7.5 2.4 50 6 12° 67.50 57.38 MSUSZ440-LN 2.5x3.8x10 10.0 72.00 61.20 MSUSZ440-LN 2.5x3.8x12.5 12.5 60 77.00 65.45 MSUSZ440-LN 3x4.5x9 3.0 4.5 9.0 2.85 50 6 12° 67.50 57.38 MSUSZ440-LN 3x4.5x12 12.0 71.00 60.35 MSUSZ440-LN 3x4.5x15 15.0 60 74.00 62.90

NEUER ARTIKEL NOUVEL ARTICLE

MSUSZ440-LN

MSCZ440

▪ Eine neu entwickelte Schneidkante ermöglicht die multifunktionale Bearbeitung von Umfang-, Nuten- und Bohrfräsen in Edelstählen

Une arête de coupe nouvellement développée permet l’usinage multifonctionnel des fraisages périphériques, des rainures et des perçages dans les aciers inoxydables

▪ DC Toleranz 0/-0.01

▪ DCON Toleranz -0.001/-0.003

22 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSCZ440 1x2 1.0 2.0 50 4 12° 46.00 39.10 MSCZ440 1x3 3.0 48.00 40.80 MSCZ440 1.1x2.2 1.1 2.2 50 4 12° 56.50 48.03 MSCZ440 1.2x2.4 1.2 2.4 50 4 12° 56.50 48.03 MSCZ440 1.3x2.6 1.3 2.6 50 4 12° 56.50 48.03 MSCZ440 1.4x2.8 1.4 2.8 50 4 12° 56.50 48.03 MSCZ440 1.5x3 1.5 3.0 50 4 12° 56.50 48.03 MSCZ440 1.5x4.5 4.5 60.50 51.43 MSCZ440 1.6x3.2 1.6 3.2 50 6 12° 62.50 53.13 MSCZ440 1.7x3.4 1.7 3.4 50 6 12° 62.50 53.13 MSCZ440 1.8x3.6 1.8 3.6 50 6 12° 62.50 53.13 MSCZ440 1.9x3.8 1.9 3.8 50 6 12° 62.50 53.13 MSCZ440 2x4 2.0 4.0 50 6 12° 62.50 53.13 MSCZ440 2x6 6.0 50 66.50 56.53 MSCZ440 2.1x4.2 2.1 4.2 50 6 12° 62.50 53.13 MSCZ440 2.2x4.4 2.2 4.4 50 6 12° 62.50 53.13

NEUER ARTIKEL NOUVEL ARTICLE

Artikel-Nr. | Réf. d’article DC APMX LU DN OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSUSZ440-LN 3.5x5.3x10.5 3.5 5.3 10.5 3.35 50 6 12° 71.00 60.35 MSUSZ440-LN 3.5x5.3x14 14.0 60 77.00 65.45 MSUSZ440-LN 3.5x5.3x17.5 17.5 82.00 69.70 MSUSZ440-LN 4x6x12 4.0 6.0 12.0 3.8 50 6 12° 71.00 60.35 MSUSZ440-LN 4x6x16 16.0 60 75.00 63.75 MSUSZ440-LN 4x6x20 20.0 78.00 66.30 MSUSZ440-LN 4.5x6.8x13.5 4.5 6.8 13.5 4.3 50 6 12° 75.00 63.75 MSUSZ440-LN 4.5x6.8x18 18.0 60 82.00 69.70 MSUSZ440-LN 4.5x6.8x22.5 22.5 86.00 73.10 MSUSZ440-LN 5x7.5x15 5.0 7.5 15.0 4.8 50 6 12° 75.00 63.75 MSUSZ440-LN 5x7.5x20 20.0 60 79.00 67.15 MSUSZ440-LN 5x7.5x25 25.0 83.00 70.55 MSUSZ440-LN 5.5x8.3x16.5 5.5 8.3 16.5 5.3 50 6 12° 82.00 69.70 MSUSZ440-LN 5.5x8.3x22 22.0 60 87.50 74.38 MSUSZ440-LN 5.5x8.3x27.5 27.5 92.50 78.63 MSUSZ440-LN 6x9x18 6.0 9.0 18.0 5.8 60 6 –82.00 69.70 MSUSZ440-LN 6x9x24 24.0 86.00 73.10 MSUSZ440-LN 6x9x30 30.0 70 89.50 76.08 15%

RABATT

Fortsetzung auf der nächsten Seite | Suite à la page suivante

15% RABATT

MSCZ440

23 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSCZ440 2.3x4.6 2.3 4.6 50 6 12° 62.50 53.13 MSCZ440 2.4x4.8 2.4 4.8 50 6 12° 62.50 53.13 MSCZ440 2.5x5 2.5 5.0 50 6 12° 62.50 53.13 MSCZ440 2.5x7.5 7.5 60 67.50 57.38 MSCZ440 2.6x5.2 2.6 5.2 50 6 12° 62.50 53.13 MSCZ440 2.7x5.4 2.7 5.4 50 6 12° 62.50 53.13 MSCZ440 2.8x5.6 2.8 5.6 50 6 12° 62.50 53.13 MSCZ440 2.9x5.8 2.9 5.8 50 6 12° 62.50 53.13 MSCZ440 3x6 3.0 6.0 50 6 12° 62.50 53.13 MSCZ440 3x9 9.0 60 66.50 56.53 MSCZ440 3.1x6.2 3.1 6.2 50 6 12° 65.50 55.68 MSCZ440 3.2x6.4 3.2 6.4 50 6 12° 65.50 55.68 MSCZ440 3.3x6.6 3.3 6.6 50 6 12° 65.50 55.68 MSCZ440 3.4x6.8 3.4 6.8 50 6 12° 65.50 55.68 MSCZ440 3.5x7 3.5 7.0 50 6 12° 65.50 55.68 MSCZ440 3.5x10.5 10.5 60 71.00 60.35 MSCZ440 3.6x7.2 3.6 7.2 50 6 12° 65.50 55.68 MSCZ440 3.7x7.4 3.7 7.4 50 6 12° 65.50 55.68 MSCZ440 3.8x7.6 3.8 7.6 50 6 12° 65.50 55.68 MSCZ440 3.9x7.8 3.9 7.8 50 6 12° 65.50 55.68 MSCZ440 4x8 4.0 8.0 50 6 12° 65.50 55.68 MSCZ440 4x12 12.0 60 70.00 59.50 MSCZ440 4.1x8.2 4.1 8.2 50 6 12° 70.00 59.50 MSCZ440 4.2x8.4 4.2 8.4 50 6 12° 70.00 59.50 MSCZ440 4.3x8.6 4.3 8.6 50 6 12° 70.00 59.50 MSCZ440 4.4x8.8 4.4 8.8 50 6 12° 70.00 59.50 MSCZ440 4.5x9 4.5 9.0 50 6 12° 70.00 59.50 MSCZ440 4.5x13.5 4.5 13.5 60 6 12° 75.00 63.75 MSCZ440 4.6x9.2 4.6 9.2 50 6 12° 70.00 59.50 MSCZ440 4.7x9.4 4.7 9.4 50 6 12° 70.00 59.50 MSCZ440 4.8x9.6 4.8 9.6 50 6 12° 70.00 59.50 MSCZ440 4.9x9.8 4.9 9.8 50 6 12° 70.00 59.50 MSCZ440 5x10 5.0 10.0 50 6 12° 70.00 59.50 MSCZ440 5x15 15.0 60 75.00 63.75 MSCZ440 5.1x10.2 5.1 10.2 50 6 12° 76.00 64.60 MSCZ440 5.2x10.4 5.2 10.4 50 6 12° 76.00 64.60 MSCZ440 5.3x10.6 5.3 10.6 50 6 12° 76.00 64.60 MSCZ440 5.4x10.8 5.4 10.8 50 6 12° 76.00 64.60 MSCZ440 5.5x11 5.5 11.0 50 6 12° 76.00 64.60 MSCZ440 5.5x16.5 16.5 60 83.00 70.55 MSCZ440 5.6x11.2 5.6 11.2 50 6 12° 76.00 64.60 MSCZ440 5.7x11.4 5.7 11.4 50 6 12° 76.00 64.60 MSCZ440 5.8x11.6 5.8 11.6 50 6 12° 76.00 64.60 MSCZ440 5.9x11.8 5.9 11.8 50 6 12° 76.00 64.60 MSCZ440 6x12 6.0 12.0 60 6 –73.00 62.05 MSCZ440 6x18 18.0 60 76.00 64.60

NEUER ARTIKEL NOUVEL ARTICLE 15% RABATT

MSCZ440-LN

▪ Eine neu entwickelte Schneidkante ermöglicht die multifunktionale Bearbeitung von Umfang-, Nuten- und Bohrfräsen in Edelstählen | Une arête de coupe nouvellement développée permet l’usinage multifonctionnel des fraisages périphériques, des rainures et des perçages dans les aciers inoxydables

▪ DC Toleranz 0/-0.01

▪ DCON Toleranz -0.001/-0.003

15% RABATT

24 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX LU DN OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSCZ440-LN 1x1.5x3 1.0 1.5 3.0 0.95 50 4 12° 47.00 39.95 MSCZ440-LN 1x1.5x4 4.0 48.00 40.80 MSCZ440-LN 1x1.5x5 5.0 50.00 42.50 MSCZ440-LN 1.5x2.3x4.5 1.5 2.3 4.5 1.45 50 4 12° 56.50 48.03 MSCZ440-LN 1.5x2.3x6 6.0 59.50 50.58 MSCZ440-LN 1.5x2.3x7.5 7.5 62.50 53.13 MSCZ440-LN 2x3x6 2.0 3.0 6.0 1.94 50 6 12° 62.50 53.13 MSCZ440-LN 2x3x8 8.0 65.50 55.68 MSCZ440-LN 2x3x10 10.0 68.50 58.23 MSCZ440-LN 2.5x3.8x7.5 2.5 3.8 7.5 2.4 50 6 12° 62.50 53.13 MSCZ440-LN 2.5x3.8x10 10.0 66.50 56.53 MSCZ440-LN 2.5x3.8x12.5 12.5 60 72.00 61.20 MSCZ440-LN 3x4.5x9 3.0 4.5 9.0 2.85 50 6 12° 62.50 53.13 MSCZ440-LN 3x4.5x12 10.0 65.50 55.68 MSCZ440-LN 3x4.5x15 15.0 60 68.50 58.23 MSCZ440-LN 3.5x5.3x10.5 3.5 5.3 10.5 3.35 50 6 12° 65.50 55.68 MSCZ440-LN 3.5x5.3x14 14.0 60 72.00 61.20 MSCZ440-LN 3.5x5.3x17.5 17.5 76.00 64.60 MSCZ440-LN 4x6x12 4.0 6.0 12.0 3.8 50 6 12° 65.50 55.68 MSCZ440-LN 4x6x16 16.0 60 70.00 59.50 MSCZ440-LN 4x6x20 20.0 73.00 62.05 MSCZ440-LN 4.5x6.8x13.5 4.5 6.8 13.5 4.3 50 6 12° 70.00 59.50 MSCZ440-LN 4.5x6.8x18 18.0 60 76.00 64.60 MSCZ440-LN 4.5x6.8x22.5 22.5 81.00 68.85 MSCZ440-LN 5x7.5x15 5.0 7.5 15.0 4.8 50 6 12° 70.00 59.50 MSCZ440-LN 5x7.5x20 20.0 60 74.00 62.90 MSCZ440-LN 5x7.5x25 25.0 77.00 65.45 MSCZ440-LN 5.5x8.3x16.5 5.5 8.3 16.5 5.3 50 6 12° 76.00 64.60 MSCZ440-LN 5.5x8.3x22 22.0 60 83.00 70.55 MSCZ440-LN 5.5x8.3x27.5 27.5 87.00 73.95 MSCZ440-LN 6x9x18 6.0 9.0 18.0 5.8 60 6 –76.00 64.60 MSCZ440-LN 6x9x24 24.0 81.00 68.85 MSCZ440-LN 6x9x30 30.0 70 85.00 72.25

NEUER ARTIKEL NOUVEL ARTICLE

DHR237

NEUER ARTIKEL NOUVEL ARTICLE

▪ Spezialisiert auf Kupferlegierungen | Spécialisé dans les alliages de cuivre.

▪ Ein Drallwinkel von 37.5 Grad sorgt für eine hohe Oberflächengüte und verhindert Kratzer auf der Schnittfläche | Un angle de torsion de 37.5 degrés garantit une qualité de surface élevée et évite les rayures sur la surface de coupe.

▪ Durch das optimierte Design und die DLC-Beschichtung erreichen Sie eine stabile Fräsleistung mit langer Standzeit und eine hohe Qualität. La conception optimisée et le revêtement DLC assurent une performance de fraisage stable avec une longue durée de vie et une haute qualité.

Fortsetzung auf der nächsten Seite | Suite à la page suivante

15% RABATT

25 PREALPINA SUISSE GmbH – 2023

▪ DCON Toleranz h5

▪ DC ≤ 1.0 Toleranz 0 /-0.006 | 1.0 < DC< 6.0 Toleranz 0 /-0.01 DC = 6.0 Toleran -0.01 /-0.02 Artikel-Nr. | Réf. d’article DC DN APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DHR237 0.1x0.3 0.1 0.085 0.2 0.3 45 4 12° 110.00 93.50 DHR237 0.1x0.5 0.5 115.00 97.75 DHR237 0.1x0.75 0.75 121.00 102.85 DHR237 0.1x1 1.0 128.00 108.80 DHR237 0.2x0.5 0.2 0.18 0.4 0.5 45 4 12° 82.50 70.13 DHR237 0.2x1 1.0 86.50 73.53 DHR237 0.2x1.5 1.5 91.00 77.35 DHR237 0.2x2 2.0 95.50 81.18 DHR237 0.3x1 0.3 0.28 0.6 1.0 45 4 12° 86.50 73.53 DHR237 0.3x1.5 1.5 91.00 77.35 DHR237 0.3x2 2.0 95.50 81.18 DHR237 0.3x3 3.0 100.50 85.43 DHR237 0.4x1 0.4 0.37 0.8 1.0 45 4 12° 75.50 64.18 DHR237 0.4x2 2.0 77.00 65.45 DHR237 0.4x3 3.0 79.00 67.15 DHR237 0.4x4 4.0 80.50 68.43 DHR237 0.5x1.5 0.5 0.46 1.0 1.5 45 4 12° 73.50 62.48 DHR237 0.5x2 2.0 75.50 64.18 DHR237 0.5x3 3.0 77.00 65.45 DHR237 0.5x4 4.0 79.00 67.15 DHR237 0.5x6 6.0 81.50 69.28 DHR237 0.6x2 0.6 0.56 1.2 2.0 45 4 12° 81.50 69.28 DHR237 0.6x3 3.0 83.00 70.55 DHR237 0.6x4 4.0 85.00 72.25 DHR237 0.6x6 6.0 87.50 74.38 DHR237 0.8x3 0.8 0.76 1.6 3.0 45 4 12° 83.00 70.55 DHR237 0.8x4 4.0 85.00 72.25 DHR237 0.8x6 6.0 87.50 74.38 DHR237 0.8x8 8.0 50 89.00 75.65 DHR237 1x3 1.0 0.95 2.0 3.0 50 4 12° 79.00 67.15 DHR237 1x4 4.0 79.50 67.58 DHR237 1x5 5.0 81.50 69.28 DHR237 1x6 6.0 83.00 70.55 DHR237 1x8 8.0 85.00 72.25 DHR237 1x10 10.0 86.50 73.53 DHR237 1x12 12.0 86.50 73.53 DHR237 1.5x4 1.5 1.45 3.0 4.0 50 4 12° 81.50 69.28 DHR237 1.5x6 6.0 81.50 69.28 DHR237 1.5x8 8.0 83.00 70.55 DHR237 1.5x10 10.0 86.00 73.10 DHR237 1.5x12 12.0 86.00 73.10 DHR237 1.5x16 16.0 60 88.50 75.23

DHR237

26 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DHR237 2x6 2.0 1.94 4.0 6.0 50 4 12° 79.50 67.58 DHR237 2x8 8.0 79.50 67.58 DHR237 2x10 10.0 80.50 68.43 DHR237 2x12 2.0 1.94 4.0 12.0 50 4 12° 80.50 68.43 DHR237 2x14 14.0 80.50 68.43 DHR237 2x16 16.0 60 82.50 70.13 DHR237 2x20 20.0 82.50 70.13 DHR237 2.5x6 2.5 2.4 5.0 6.0 45 4 12° 81.50 69.28 DHR237 2.5x8 8.0 50 81.50 69.28 DHR237 2.5x10 10.0 83.00 70.55 DHR237 2.5x12 12.0 86.50 73.53 DHR237 2.5x14 14.0 86.50 73.53 DHR237 2.5x16 16.0 88.50 75.23 DHR237 2.5x20 20.0 60 93.50 79.48 DHR237 3x8 3.0 2.85 6.0 8.0 50 6 12° 82.50 70.13 DHR237 3x10 10.0 84.00 71.40 DHR237 3x15 15.0 60 87.50 74.38 DHR237 3x20 20.0 91.00 77.35 DHR237 3x25 25.0 70 99.50 84.58 DHR237 4x10 4.0 3.8 8.0 10.0 50 6 12° 76.50 65.03 DHR237 4x15 15.0 60 78.00 66.30 DHR237 4x20 20.0 83.00 70.55 DHR237 4x25 25.0 70 92.50 78.63 DHR237 4x30 30.0 96.00 81.60 DHR237 5x15 5.0 4.8 10.0 15.0 50 6 12° 78.00 66.30 DHR237 5x20 20.0 60 83.00 70.55 DHR237 5x25 25.0 92.50 78.63 DHR237 5x30 30.0 70 96.00 81.60 DHR237 6x15 6.0 5.8 12.0 15.0 50 6 –83.00 70.55 DHR237 6x20 20.0 60 95.50 81.18 DHR237 6x30 30.0 70 104.00 88.40 DHR237 6x50 50.0 90 156.00 132.60 15% RABATT

DHR237R

NEUER ARTIKEL NOUVEL ARTICLE

▪ Spezialisiert auf Kupferlegierungen | Spécialisé dans les alliages de cuivre.

▪

▪ Durch das optimierte Design und die DLC-Beschichtung erreichen Sie eine stabile Fräsleistung mit langer Standzeit und eine hohe Qualität La conception optimisée et le revêtement DLC assurent une performance de fraisage stable avec une longue durée de vie et une haute qualité.

27 PREALPINA SUISSE GmbH – 2023

DCON Toleranz h5 | RE Toleranz ±0.005

▪ DC ≤ 1.0 Toleranz 0 /-0.006 | DC > 1.0 Toleranz 0 /-0.01 | DC < 6.0 Toleranz 0 /-0.01 | DC = 6.0 Toleranz -0.01/-0.02

Fortsetzung auf der nächsten Seite | Suite à la page suivante Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DHR237R 0.2xR0.02x0.5  0.2 0.18 0.02 0.4 0.5 45 4 12° 99.50 84.58 DHR237R 0.2xR0.02x1  1.0 104.00 88.40 DHR237R 0.2xR0.02x1.5  1.5 106.50 90.53 DHR237R 0.2xR0.05x0.5 0.05 0.5 99.50 84.58 DHR237R 0.2xR0.05x1 1.0 104.00 88.40 DHR237R 0.2xR0.05x1.5 1.5 106.50 90.53 DHR237R 0.3xR0.02x1  0.3 0.28 0.02 0.6 1.0 45 4 12° 104.00 88.40 DHR237R 0.3xR0.02x1.5  1.5 106.50 90.53 DHR237R 0.3xR0.02x2  2.0 108.00 91.80 DHR237R 0.3xR0.05x1 0.05 1.0 104.00 88.40 DHR237R 0.3xR0.05x1.5 1.5 106.50 90.53 DHR237R 0.3xR0.05x2 2.0 108.00 91.80 DHR237R 0.4xR0.02x1  0.4 0.37 0.02 0.8 1.0 45 4 12° 91.00 77.35 DHR237R 0.4xR0.02x2  2.0 92.50 78.63 DHR237R 0.4xR0.02x3  3.0 94.50 80.33 DHR237R 0.4xR0.02x4  4.0 96.00 81.60 DHR237R 0.4xR0.05x1 0.05 1.0 91.00 77.35 DHR237R 0.4xR0.05x2 2.0 92.50 78.63 DHR237R 0.4xR0.05x3 3.0 94.50 80.33 DHR237R 0.4xR0.05x4 4.0 96.00 81.60 DHR237R 0.4xR0.1x1 0.1 1.0 91.00 77.35 DHR237R 0.4xR0.1x2 2.0 92.50 78.63 DHR237R 0.4xR0.1x3 3.0 94.50 80.33 DHR237R 0.4xR0.1x4 4.0 96.00 81.60 DHR237R 0.5xR0.02x2  0.5 0.46 0.02 1.0 2.0 45 4 12° 90.00 76.50 DHR237R 0.5xR0.02x3  3.0 92.00 78.20 DHR237R 0.5xR0.02x4  4.0 93.50 79.48 DHR237R 0.5xR0.02x5  5.0 95.50 81.18 DHR237R 0.5xR0.05x2 0.05 2.0 90.00 76.50 DHR237R 0.5xR0.05x3 3.0 92.00 78.20 DHR237R 0.5xR0.05x4 4.0 93.50 79.48 DHR237R 0.5xR0.05x5 5.0 95.50 81.18 DHR237R 0.5xR0.1x2 0.1 2.0 90.00 76.50 DHR237R 0.5xR0.1x3 3.0 92.00 78.20 DHR237R 0.5xR0.1x4 4.0 93.50 79.48 DHR237R 0.5xR0.1x5 5.0 95.50 81.18 DHR237R 0.6xR0.02x2  0.6 0.56 0.02 1.2 2.0 45 4 12° 97.00 82.45 DHR237R 0.6xR0.02x4  4.0 101.50 86.28 DHR237R 0.6xR0.02x6  6.0 105.00 89.25 DHR237R 0.6xR0.05x2 0.05 2.0 97.00 82.45 DHR237R 0.6xR0.05x4 4.0 101.50 86.28 DHR237R 0.6xR0.05x6 6.0 105.00 89.25 DHR237R 0.6xR0.1x2 0.1 2.0 97.00 82.45 DHR237R 0.6xR0.1x4 4.0 101.50 86.28 DHR237R 0.6xR0.1x6 6.0 105.00 89.25 15% RABATT

DHR237R NEUER ARTIKEL NOUVEL ARTICLE

28 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DHR237R 0.8xR0.02x4  0.8 0.76 0.02 1.6 4.0 45 4 12° 101.50 86.28 DHR237R 0.8xR0.02x6  6.0 105.00 89.25 DHR237R 0.8xR0.02x8  8.0 106.50 90.53 DHR237R 0.8xR0.05x4 0.05 4.0 101.50 86.28 DHR237R 0.8xR0.05x6 6.0 105.00 89.25 DHR237R 0.8xR0.05x8 8.0 106.50 90.53 DHR237R 0.8xR0.1x4 0.1 4.0 101.50 86.28 DHR237R 0.8xR0.1x6 6.0 105.00 89.25 DHR237R 0.8xR0.1x8 8.0 106.50 90.53 DHR237R 1xR0.05x3  1.0 0.95 0.05 2.0 3.0 45 4 12° 94.50 80.33 DHR237R 1xR0.05x4  4.0 95.50 81.18 DHR237R 1xR0.05x5  5.0 98.00 83.30 DHR237R 1xR0.05x6  6.0 99.50 84.58 DHR237R 1xR0.05x8  8.0 50 101.50 86.28 DHR237R 1xR0.05x10  10.0 104.00 88.40 DHR237R 1xR0.1x3 0.1 3.0 45 94.50 80.33 DHR237R 1xR0.1x4 4.0 95.50 81.18 DHR237R 1xR0.1x5 5.0 98.00 83.30 DHR237R 1xR0.1x6 6.0 99.50 84.58 DHR237R 1xR0.1x8 8.0 50 101.50 86.28 DHR237R 1xR0.1x10 10.0 104.00 88.40 DHR237R 1xR0.2x3 0.2 3.0 45 94.50 80.33 DHR237R 1xR0.2x4 4.0 95.50 81.18 DHR237R 1xR0.2x5 5.0 98.00 83.30 DHR237R 1xR0.2x6 6.0 99.50 84.58 DHR237R 1xR0.2x8 8.0 50 101.50 86.28 DHR237R 1xR0.2x10 10.0 104.00 88.40 DHR237R 1.5xR0.1x5  1.5 1.45 0.1 3.0 5.0 45 4 12° 98.50 83.73 DHR237R 1.5xR0.1x10  10.0 50 99.50 84.58 DHR237R 1.5xR0.1x15  15.0 100.50 85.43 DHR237R 1.5xR0.2x5  0.2 5.0 45 98.50 83.73 DHR237R 1.5xR0.2x10  10.0 50 99.50 84.58 DHR237R 1.5xR0.2x15  15.0 100.50 85.43 DHR237R 1.5xR0.3x5  0.3 5.0 45 94.50 80.33 DHR237R 1.5xR0.3x10  10.0 50 99.50 84.58 DHR237R 1.5xR0.3x15  15.0 100.50 85.43 DHR237R 1.5xR0.5x5  0.5 5.0 45 95.50 81.18 DHR237R 1.5xR0.5x10 10.0 50 99.50 84.58 DHR237R 1.5xR0.5x15  15.0 100.50 85.43 DHR237R 1.5xR0.5x20 20.0 60 102.00 86.70 DHR237R 2xR0.1x5 2.0 1.94 0.1 4.0 5.0 45 4 12° 92.00 78.20 DHR237R 2xR0.1x8 8.0 50 95.50 81.18 DHR237R 2xR0.1x10 10.0 96.00 81.60 DHR237R 2xR0.1x15 15.0 97.00 82.45 DHR237R 2xR0.1x20 20.0 60 98.50 83.73 DHR237R 2xR0.2x5 0.2 5.0 45 92.00 78.20 DHR237R 2xR0.2x8 8.0 50 95.50 81.18 DHR237R 2xR0.2x10 10.0 96.00 81.60 DHR237R 2xR0.2x15 15.0 97.00 82.45 DHR237R 2xR0.2x20 20.0 60 98.50 83.73 DHR237R 2xR0.3x5 0.3 5.0 45 92.00 78.20 DHR237R 2xR0.3x8 8.0 50 95.50 81.18 DHR237R 2xR0.3x10 10.0 96.00 81.60 DHR237R 2xR0.3x15 15.0 97.00 82.45 DHR237R 2xR0.3x20 20.0 60 98.50 83.73 DHR237R 2xR0.5x5 0.5 5.0 45 92.00 78.20 DHR237R 2xR0.5x8 8.0 50 95.50 81.18 DHR237R 2xR0.5x10 10.0 96.00 81.60

15% RABATT

Fortsetzung auf der nächsten Seite | Suite à la page suivante

DHR237R NEUER ARTIKEL NOUVEL ARTICLE

29 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DHR237R 2xR0.5x15 2.0 1.94 0.5 4.0 15.0 50 4 12° 97.00 82.45 DHR237R 2xR0.5x20 20.0 60 98.50 83.73 DHR237R 2.5xR0.2x8 2.5 2.4 0.2 4.0 8.0 50 4 12° 95.50 81.18 DHR237R 2.5xR0.2x14 14.0 97.00 82.45 DHR237R 2.5xR0.2x20 20.0 60 98.50 83.73 DHR237R 2.5xR0.5x8 0.5 8.0 50 95.50 81.18 DHR237R 2.5xR0.5x14 14.0 97.00 82.45 DHR237R 2.5xR0.5x20 20.0 60 98.50 83.73 DHR237R 3xR0.1x12 3.0 2.85 0.1 6.0 12.0 50 6 12° 104.00 88.40 DHR237R 3xR0.1x18 18.0 60 106.50 90.53 DHR237R 3xR0.1x24 24.0 70 112.50 95.63 DHR237R 3xR0.2x12 0.2 12.0 50 104.00 88.40 DHR237R 3xR0.2x18 18.0 60 106.50 90.53 DHR237R 3xR0.2x24 24.0 70 112.50 95.63 DHR237R 3xR0.3x12 0.3 12.0 50 104.00 88.40 DHR237R 3xR0.3x18 18.0 60 106.50 90.53 DHR237R 3xR0.3x24 24.0 70 112.50 95.63 DHR237R 3xR0.5x12 0.5 12.0 50 104.00 88.40 DHR237R 3xR0.5x15 15.0 60 105.50 89.68 DHR237R 3xR0.5x18 18.0 106.50 90.53 DHR237R 3xR0.5x24 24.0 70 119.50 101.58 DHR237R 3xR0.5x30 30.0 123.00 104.55 DHR237R 4xR0.1x16 4.0 3.8 0.1 8.0 16.0 60 6 12° 104.00 88.40 DHR237R 4xR0.1x24 24.0 106.50 90.53 DHR237R 4xR0.1x32 32.0 70 112.50 95.63 DHR237R 4xR0.2x16 0.2 16.0 60 104.00 88.40 DHR237R 4xR0.2x24 24.0 106.50 90.53 DHR237R 4xR0.2x32 32.0 70 112.50 95.63 DHR237R 4xR0.3x24 0.3 16.0 60 104.00 88.40 DHR237R 4xR0.3x24 24.0 106.50 90.53 DHR237R 4xR0.3x32 32.0 70 112.50 95.63 DHR237R 4xR0.5x16 0.5 16.0 60 104.00 88.40 DHR237R 4xR0.5x24 24.0 106.50 90.53 DHR237R 4xR0.5x32 32.0 70 119.50 101.58 DHR237R 4xR1x16 1.0 16.0 60 104.00 88.40 DHR237R 4xR1x24 24.0 106.50 90.53 DHR237R 4xR1x32 32.0 70 119.50 101.58 DHR237R 5xR0.1x20 5.0 4.8 0.1 10.0 20.0 60 6 12° 105.50 89.68 DHR237R 5xR0.1x40 40.0 80 154.00 130.90 DHR237R 6xR0.1x24 6.0 5.8 0.1 12.0 24.0 60 6 –119.50 101.58 DHR237R 6xR0.1x48 48.0 90 187.00 158.95 DHR237R 6xR0.2x24 0.2 24.0 60 119.50 101.58 DHR237R 6xR0.2x48 48.0 90 187.00 158.95 DHR237R 6xR0.3x24 0.3 24.0 60 119.50 101.58 DHR237R 6xR0.3x48 48.0 90 187.00 158.95 DHR237R 6xR0.5x24 0.5 24.0 60 119.50 101.58 DHR237R 6xR0.5x30 30.0 70 125.50 106.68 DHR237R 6xR0.5x48 48.0 90 187.00 158.95 DHR237R 6xR1x24 1.0 24.0 60 119.50 101.58 DHR237R 6xR1x48 48.0 90 187.00 158.95

15% RABATT

DRB230

▪ Spezialisiert auf Kupferlegierungen | Spécialisé dans les alliages de cuivre

▪ DC ≤ 1.0 Toleranz 0 /-0.006 | DC ≥ 1.0 Toleranz 0 /-0.01

▪ RE (RE ≤ 0.2) Toleranz ±0.002 | RE (0.2 < RE ≤ 0.5 Toleranz ±0.003) | RE (RE ≥ 0.5) Toleranz ±0.004

▪ DCON Toleranz h5

15% RABATT

30 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DRB230 R0.05x0.3 0.1 0.085 0.05 0.07 0.3 45 4 12° 120.50 102.43 DRB230 R0.05x0.5 0.5 125.50 106.68 DRB230 R0.075x0.3  0.15 0.13 0.075 0.1 0.3 45 4 12° 121.00 102.85 DRB230 R0.075x0.5  0.5 124.50 105.83 DRB230 R0.075x1  1.0 130.00 110.50 DRB230 R0.1x0.5 0.2 0.18 0.1 0.15 0.5 45 4 12° 96.00 81.60 DRB230 R0.1x0.75  0.75 98.50 83.73 DRB230 R0.1x1 1.0 100.50 85.43 DRB230 R0.1x1.5 1.5 105.00 89.25 DRB230 R0.1x2  2.0 109.00 92.65 DRB230 R0.15x0.5  0.3 0.28 0.15 0.2 0.5 45 4 12° 96.00 81.60 DRB230 R0.15x1 1.0 100.50 85.43 DRB230 R0.15x1.5 1.5 105.00 89.25 DRB230 R0.15x2 2.0 109.00 92.65 DRB230 R0.2x0.5  0.4 0.37 0.2 0.3 0.5 45 4 12° 87.50 74.38 DRB230 R0.2x1 1.0 87.50 74.38 DRB230 R0.2x1.5  1.5 89.00 75.65 DRB230 R0.2x2 2.0 89.00 75.65 DRB230 R0.2x3 3.0 91.00 77.35 DRB230 R0.2x4 4.0 92.50 78.63 DRB230 R0.2x5  5.0 94.50 80.33 DRB230 R0.2x6  6.0 96.00 81.60 DRB230 R0.25x1  0.5 0.46 0.25 0.35 1.0 45 4 12° 85.00 72.25 DRB230 R0.25x1.5  1.5 85.00 72.25 DRB230 R0.25x2 2.0 86.00 73.10 DRB230 R0.25x3 3.0 87.50 74.38 DRB230 R0.25x4 4.0 89.00 75.65 DRB230 R0.25x5 5.0 91.00 77.35 DRB230 R0.25x6  6.0 92.50 78.63 DRB230 R0.3x1  0.6 0.56 0.3 0.45 1.0 45 4 12° 65.00 55.25 DRB230 R0.3x1.5  1.5 67.00 56.95 DRB230 R0.3x2 2.0 67.00 56.95 DRB230 R0.3x3 3.0 68.50 58.23 DRB230 R0.3x4 4.0 70.00 59.50 DRB230 R0.3x5 5.0 72.00 61.20 DRB230 R0.3x6 6.0 73.50 62.48 DRB230 R0.3x8  8.0 78.00 66.30 DRB230 R0.3x10  10.0 82.50 70.13 DRB230 R0.4x1.5  0.8 0.76 0.4 0.6 1.5 45 4 12° 67.00 56.95 DRB230 R0.4x2  2.0 67.00 56.95 DRB230 R0.4x3 3.0 68.50 58.23 DRB230 R0.4x4 4.0 70.00 59.50 DRB230 R0.4x5  5.0 72.00 61.20 DRB230 R0.4x6 6.0 72.00 61.20

NEUER ARTIKEL NOUVEL ARTICLE

Fortsetzung auf der nächsten Seite | Suite à la page suivante

DRB230

31 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel DRB230 R0.4x8 0.8 0.76 0.4 0.6 8.0 45 4 12° 73.50 62.48 DRB230 R0.4x10  10.0 78.00 66.30 DRB230 R0.5x2  1.0 0.95 0.5 0.75 2.0 45 4 12° 64.00 54.40 DRB230 R0.5x3 3.0 65.00 55.25 DRB230 R0.5x4 4.0 65.00 55.25 DRB230 R0.5x5 5.0 67.00 56.95 DRB230 R0.5x6 6.0 67.00 56.95 DRB230 R0.5x8 8.0 70.00 59.50 DRB230 R0.5x10 10.0 70.00 59.50 DRB230 R0.5x12 12.0 70.00 59.50 DRB230 R0.5x14  14.0 73.50 62.48 DRB230 R0.5x16  16.0 73.50 62.48 DRB230 R0.75x4  1.5 1.45 0.75 1.1 4.0 50 4 12° 67.00 56.95 DRB230 R0.75x6 6.0 67.00 56.95 DRB230 R0.75x8  8.0 72.00 61.20 DRB230 R0.75x10  10.0 72.00 61.20 DRB230 R0.75x12 12.0 75.50 64.18 DRB230 R0.75x14  14.0 75.50 64.18 DRB230 R0.75x16  16.0 80.50 68.43 DRB230 R0.75x18 18.0 84.00 71.40 DRB230 R1x3  2.0 1.94 1.0 1.5 3.0 50 4 12° 68.50 58.23 DRB230 R1x4 4.0 68.50 58.23 DRB230 R1x6 6.0 68.50 58.23 DRB230 R1x8 8.0 70.00 59.50 DRB230 R1x10 10.0 70.00 59.50 DRB230 R1x12 12.0 70.00 59.50 DRB230 R1x14  14.0 70.00 59.50 DRB230 R1x16 16.0 70.00 59.50 DRB230 R1x20 20.0 60 78.00 66.30 DRB230 R1x25 25.0 86.50 73.53 DRB230 R1.5x6  3.0 2.85 1.5 2.5 6.0 60 6 12° 86.50 73.53 DRB230 R1.5x8 8.0 89.00 75.65 DRB230 R1.5x10 10.0 89.00 75.65 DRB230 R1.5x12  12.0 89.00 75.65 DRB230 R1.5x15 15.0 70 91.00 77.35 DRB230 R1.5x20 20.0 95.50 81.18 DRB230 R1.5x25 25.0 95.50 81.18 DRB230 R1.5x30 30.0 104.00 88.40 DRB230 R2x10 4.0 3.8 2.0 3.0 10.0 60 6 12° 82.50 70.13 DRB230 R2x12  12.0 82.50 70.13 DRB230 R2x15 15.0 82.50 70.13 DRB230 R2x20 20.0 98.00 83.30 DRB230 R2x25 25.0 70 104.00 88.40 DRB230 R2x30 30.0 108.00 91.80 DRB230 R2x40 40.0 80 117.00 99.45 DRB230 R3x20 6.0 5.7 3.0 6.0 20.0 70 6 –108.00 91.80 DRB230 R3x25  25.0 110.00 93.50 DRB230 R3x30 30.0 80 113.50 96.48 DRB230 R3x40  40.0 121.00 102.85 DRB230 R3x50 50.0 100 131.50 111.78

15% RABATT

MACH225

▪ High-Speed-Cutting für gehärtete Stähle | UGV dans les aciers trempés

▪ Hartfräsen bei kleinen Schnittiefen und hohen Vorschüben Avance rapide avec de petites profondeurs de passes dans le fraisage dur

32 PREALPINA SUISSE GmbH – 2023

▪ RE < 0.25 Toleranz ± 0.005 ▪ RE ≥ 0.25 Toleranz ± 0.01 ▪ DCON Toleranz h5 Artikel-Nr. | Réf. d’article DC DN RE APMX LU OAL DCON Preis | Prix CHF Aktionspreis Prix promotionnel MACH225 R0.1x0.5(D4) 0.2 0.175 0.1 0.2 0.5 50 4 118.00 100.30 MACH225 R0.1x0.5(D6) 6 155.00 131.75 MACH225 R0.2x1(D4) 0.4 0.365 0.2 0.4 1.0 50 4 106.50 90.53 MACH225 R0.2x1(D6) 6 142.50 121.13 MACH225 R0.25x1.25(D4) 0.5 0.46 0.25 0.5 1.25 50 4 94.50 80.33 MACH225 R0.25x1.25(D6) 6 130.00 110.50 MACH225 R0.3x1.5(D4) 0.6 0.56 0.3 0.6 1.5 50 4 83.00 70.55 MACH225 R0.3x1.5(D6) 6 118.00 100.30 MACH225 R0.4x2(D4) 0.8 0.76 0.4 0.8 2.0 50 4 76.50 65.03 MACH225 R0.4x2(D6) 6 111.00 94.35 MACH225 R0.5x2.5(D4) 1.0 0.95 0.5 1.0 2.5 50 4 68.50 58.23 MACH225 R0.5x2.5(D6) 6 102.00 86.70 MACH225 R0.5x4(D6) 4.0 6 146.00 124.10 MACH225 R0.5x6(D6) 6.0 6 153.50 130.48 MACH225 R0.75x3.8(D4) 1.5 1.45 0.75 1.5 3.8 50 4 68.50 58.23 MACH225 R0.75x3.8(D6) 6 102.00 86.70 MACH225 R1x5(D4) 2.0 1.94 1.0 2.0 5.0 50 4 62.00 52.70 MACH225 R1x5(D6) 6 102.00 86.70 MACH225 R1x6(D6) 6.0 6 169.00 143.65 MACH225 R1x8(D6) 8.0 6 178.50 151.73 MACH225 R1.5x8(D6) 3.0 2.85 1.5 3.0 8.0 60 6 112.00 95.20 MACH225 R1.5x10(D6) 10.0 6 174.50 148.33 MACH225 R1.5x15(D6) 15.0 6 188.00 159.80 MACH225 R2x10(D6) 4.0 3.80 2.0 4.0 10.0 60 6 112.00 95.20 MACH225 R2.5x12(D6) 5.0 4.80 2.5 5.0 12.0 60 6 123.50 104.98 MACH225 R3x15(D6) 6.0 5.70 3.0 6.0 15.0 60 6 123.50 104.98 15% RABATT

MRBSH330

NEUER ARTIKEL NOUVEL ARTICLE

▪ Der hocheffiziente 3-Schneiden-Kugelfräser optimiert die Form der Zentralkante und ermöglicht eine hohe Schnitttiefe | La fraise à billes à 3 cannelures à haut rendement optimise la forme de l’arête centrale et permet une grande profondeur de coupe.

▪ DCON Toleranz -0.001 / -0.003 | DC Toleranz 0/-0.01

▪ Selbst gehärteter Stahl von 45 bis 70HRC kann mit langer Standzeit und hoher Effizienz bearbeitet werden | Même les aciers trempés de 45 à 70 HRC peuvent être usinés avec une longue durée de vie et une grande efficacit

▪ RE Toleranz ± 0.005

33 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC DN RE APMX LU BHTA OAL DCON Preis | Prix CHF Aktionspreis Prix promotionnel MRBSH330 R0.1x0.3 0.2 0.18 0.1 0.3 0.15 12° 45 4 118.00 100.30 MRBSH330 R0.1x0.5 0.5 118.00 100.30 MRBSH330 R0.15x0.5 0.3 0.28 0.15 0.5 0.2 12° 45 4 116.50 99.03 MRBSH330 R0.15x0.6 0.6 116.50 99.03 MRBSH330 R0.15x0.75 0.75 116.50 99.03 MRBSH330 R0.15x1 1.0 116.50 99.03 MRBSH330 R0.2x0.5 0.4 0.37 0.2 0.5 0.3 12° 45 4 80.00 68.00 MRBSH330 R0.2x0.8 0.8 80.00 68.00 MRBSH330 R0.2x1.0 1.0 80.00 68.00 MRBSH330 R0.25x1 0.5 0.46 0.25 1.0 0.35 12° 45 4 80.00 68.00 MRBSH330 R0.25x1.5 1.5 80.00 68.00 MRBSH330 R0.3x1 0.6 0.56 0.3 1.0 0.45 12° 45 4 68.50 58.23 MRBSH330 R0.3x1.5 1.5 68.50 58.23 MRBSH330 R0.3x2 2.0 68.50 58.23 MRBSH330 R0.5x2 1.0 0.95 0.5 2.0 0.75 12° 45 4 64.00 54.40 MRBSH330 R0.5x2.5 2.5 64.00 54.40 MRBSH330 R0.5x3 3.0 64.00 54.40 MRBSH330 R0.75x3 1.5 1.45 0.75 3.0 1.1 12° 45 4 73.00 62.05 MRBSH330 R0.75x4 4.0 73.00 62.05 MRBSH330 R1x3 2.0 1.94 1.0 3.0 1.5 12° 45 4 57.50 48.88 MRBSH330 R1x4 4.0 57.50 48.88 MRBSH330 R1x6 6.0 57.50 48.88 MRBSH330 R1.5x6  3.0 2.85 1.5 6.0 2.5 12° 60 6 78.50 66.73 MRBSH330 R1.5x8  8.0 78.50 66.73 MRBSH330 R1.5x10  10.0 78.50 66.73 MRBSH330 R2x8  4.0 3.8 2.0 8.0 3.0 12° 65 6 83.00 70.55 MRBSH330 R2x10  10.0 83.00 70.55 MRBSH330 R2x12  12.0 83.00 70.55 MRBSH330 R3x10  6.0 5.7 3.0 10.0 6.0 – 65 6 99.00 84.15 MRBSH330 R3x15  15.0 99.00 84.15 MRBSH330 R3x20  20.0 99.00 84.15

15% RABATT

MSBSH330-5X

▪ RE Toleranz ± 0.005 | DC Toleranz 0/-0.01

MSB345

▪ Effiziente Vibrationsvermeidung durch ungleiche Schneidenteilung Réduction des vibrations grâce à la géométrie de coupe 3 dents avec pas inégal

▪ Realisiert 30% effizientere Bearbeitung als 2 Schneider 30 % plus rapide qu’une fraise 2 dents

▪ DCON Toleranz -0.001 / -0.003

▪ Mugen-Premium-Beschichtung für gehärtete Stähle bis 60 HRC Revêtement Mugen pour une meilleure résistance à l’usure dans les aciers trempés jusqu’à 60 HRC

± 0.01 | DCON Toleranz h5

34 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC RE APMX BHTA OAL DCON Preis | Prix CHF Aktionspreis Prix promotionnel MSBSH330-5X R0.1 0.2 0.1 0.12 15° 50 6 121.00 102.85 MSBSH330-5X R0.15 0.3 0.15 0.18 15° 50 6 103.50 87.98 MSBSH330-5X R0.2 0.4 0.2 0.24 15° 50 6 75.50 64.18 MSBSH330-5X R0.25 0.5 0.25 0.3 15° 50 6 72.00 61.20 MSBSH330-5X R0.3 0.6 0.3 0.36 15° 50 6 68.50 58.23 MSBSH330-5X R0.5 1.0 0.5 0.6 15° 50 6 64.00 54.40 MSBSH330-5X R0.75 1.5 0.75 0.9 15° 50 6 74.00 62.90 MSBSH330-5X R1 2.0 1.0 1.2 15° 50 6 58.50 49.73 NEUER ARTIKEL NOUVEL ARTICLE 15% RABATT

▪

Toleranz

Artikel-Nr. | Réf. d’article DC RE APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSB345 R0.5 1.0 0.5 1.5 60 6 12° 73.50 62.48 MSB345 R0.6 1.2 0.6 2.0 60 6 12° 107.00 90.95 MSB345 R0.7 1.4 0.7 3.0 60 6 12° 107.00 90.95 MSB345 R0.8 1.6 0.8 3.0 60 6 12° 107.00 90.95 MSB345 R0.9 1.8 0.9 3.0 60 6 12° 107.00 90.95 MSB345 R1 2.0 1.0 3.0 60 6 12° 73.50 62.48 MSB345 R1.1 2.2 1.1 3.5 60 6 12° 114.50 97.33 MSB345 R1.2 2.4 1.2 4.0 60 6 12° 114.50 97.33 MSB345 R1.3 2.6 1.3 4.0 60 6 12° 114.50 97.33 MSB345 R1.4 2.8 1.4 5.0 60 6 12° 114.50 97.33 MSB345 R1.5 3.0 1.5 5.0 60 6 12° 78.50 66.73 MSB345 R1.6 3.2 1.6 5.0 60 6 12° 114.50 97.33 MSB345 R1.7 3.4 1.7 6.0 60 6 12° 114.50 97.33 MSB345 R1.8 3.6 1.8 6.0 60 6 12° 114.50 97.33 MSB345 R1.9 3.8 1.9 6.0 60 6 12° 114.50 97.33 15% RABATT

MSB345

MSBH345

▪ Realisiert 30% effizientere Bearbeitung als 2 Schneider

30 % plus rapide qu’une fraise 2 dents

▪ Effiziente Vibrationsvermeidung durch ungleiche Schneidenteilung

Réduction des vibrations grâce à la géométrie de coupe 3 dents avec pas inégal

▪ Mugen-Premium-Beschichtung für gehärtete Stähle bis 65 HRC Revêtement Mugen-Premium pour une meilleure résistance à l’usure dans les aciers trempés jusqu’à 65 HRC

▪ RE Toleranz ± 0.01 | DCON Toleranz h5

35 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC RE APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSB345 R2 4.0 2.0 6.0 70 6 12° 78.50 66.73 MSB345 R2.1 4.2 2.1 7.0 70 6 12° 126.00 107.10 MSB345 R2.2 4.4 2.2 7.0 70 6 12° 126.00 107.10 MSB345 R2.3 4.6 2.3 7.0 70 6 12° 126.00 107.10 MSB345 R2.4 4.8 2.4 8.0 70 6 12° 126.00 107.10 MSB345 R2.5 5.0 2.5 8.0 70 6 12° 86.50 73.53 MSB345 R2.6 5.2 2.6 8.0 70 6 12° 134.50 114.33 MSB345 R2.7 5.4 2.7 9.0 70 6 12° 134.50 114.33 MSB345 R2.8 5.6 2.8 9.0 70 6 12° 134.50 114.33 MSB345 R2.9 5.8 2.9 9.0 70 6 12° 134.50 114.33 MSB345 R3 6.0 3.0 10.0 80 6 – 92.50 78.63 MSB345 R4 8.0 4.0 12.0 90 8 – 159.00 135.15 MSB345 R5 10.0 5.0 15.0 100 10 – 214.00 181.90 MSB345 R6 12.0 6.0 20.0 110 12 – 300.00 255.00

Artikel-Nr. | Réf. d’article DC RE APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel MSBH345 R0.5 1.0 0.5 1.5 60 6 12° 99.00 84.15 MSBH345 R0.6 1.2 0.6 2.0 60 6 12° 144.00 122.40 MSBH345 R0.7 1.4 0.7 3.0 60 6 12° 144.00 122.40 MSBH345 R0.8 1.6 0.8 3.0 60 6 12° 144.00 122.40 MSBH345 R0.9 1.8 0.9 3.0 60 6 12° 144.00 122.40 MSBH345 R1 2.0 1.0 3.0 60 6 12° 99.00 84.15 MSBH345 R1.1 2.2 1.1 3.5 60 6 12° 157.50 133.88 MSBH345 R1.2 2.4 1.2 4.0 60 6 12° 157.50 133.88 MSBH345 R1.3 2.6 1.3 4.0 60 6 12° 157.50 133.88 MSBH345 R1.4 2.8 1.4 5.0 60 6 12° 157.50 133.88 MSBH345 R1.5 3.0 1.5 5.0 60 6 12° 108.00 91.80 MSBH345 R1.6 3.2 1.6 5.0 60 6 12° 157.50 133.88 MSBH345 R1.7 3.4 1.7 6.0 60 6 12° 157.50 133.88 MSBH345 R1.8 3.6 1.8 6.0 60 6 12° 157.50 133.88 MSBH345 R1.9 3.8 1.9 6.0 60 6 12° 157.50 133.88 MSBH345 R2 4.0 2.0 6.0 70 6 12° 108.00 91.80 MSBH345 R2.1 4.2 2.1 7.0 70 6 12° 170.50 144.93 MSBH345 R2.2 4.4 2.2 7.0 70 6 12° 170.50 144.93 MSBH345 R2.3 4.6 2.3 7.0 70 6 12° 170.50 144.93 MSBH345 R2.4 4.8 2.4 8.0 70 6 12° 170.50 144.93 MSBH345 R2.5 5.0 2.5 8.0 70 6 12° 117.00 99.45 MSBH345 R2.6 5.2 2.6 8.0 70 6 12° 183.00 155.55 MSBH345 R2.7 5.4 2.7 9.0 70 6 12° 183.00 155.55 MSBH345 R2.8 5.6 2.8 9.0 70 6 12° 183.00 155.55 MSBH345 R2.9 5.8 2.9 9.0 70 6 12° 183.00 155.55 MSBH345 R3 6.0 3.0 10.0 80 6 – 125.50 106.68

15% RABATT 15% RABATT

AL2D-2

▪ Die AL-Serie realisiert hochpräzise, stabile Bearbeitungen La série AL permet des usinages très précis avec une grande stabilité

▪ Werkzeug poliert und geläppt | Outil poli et rodé

Toleranz 0/-0.02 | DCON h6

36 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel AL2D-2 0.5 0.5 1.0 45 4 9° 39.50 33.58 AL2D-2 0.6 0.6 1.2 45 4 9° 47.50 40.38 AL2D-2 0.7 0.7 1.4 45 4 9° 47.50 40.38 AL2D-2 0.8 0.8 1.6 45 4 9° 47.50 40.38 AL2D-2 0.9 0.9 1.8 45 4 9° 47.50 40.38 AL2D-2 1 1.0 2.0 45 4 9° 29.50 25.08 AL2D-2 1.1 1.1 2.2 45 4 9° 47.50 40.38 AL2D-2 1.2 1.2 2.4 45 4 9° 47.50 40.38 AL2D-2 1.3 1.3 2.6 45 4 9° 47.50 40.38 AL2D-2 1.4 1.4 2.8 45 4 9° 47.50 40.38 AL2D-2 1.5 1.5 3.0 45 4 9° 29.50 25.08 AL2D-2 1.6 1.6 3.2 45 4 9° 47.50 40.38 AL2D-2 1.7 1.7 3.4 45 4 9° 47.50 40.38 AL2D-2 1.8 1.8 3.6 45 4 9° 47.50 40.38 AL2D-2 1.9 1.9 3.8 45 4 9° 47.50 40.38 AL2D-2 2 2.0 4.0 45 4 9° 29.50 25.08 AL2D-2 2.1 2.1 4.2 45 4 9° 55.00 46.75 AL2D-2 2.2 2.2 4.4 45 4 9° 55.00 46.75 AL2D-2 2.3 2.3 4.6 45 4 9° 55.00 46.75 AL2D-2 2.4 2.4 4.8 45 4 9° 55.00 46.75 AL2D-2 2.5 2.5 5.0 45 4 9° 39.50 33.58 AL2D-2 2.6 2.6 5.2 45 4 9° 55.00 46.75 AL2D-2 2.7 2.7 5.4 45 4 9° 55.00 46.75 AL2D-2 2.8 2.8 5.6 45 4 9° 55.00 46.75 AL2D-2 2.9 2.9 5.8 50 6 9° 57.00 48.45 AL2D-2 3 3.0 6.0 50 6 9° 41.50 35.28 AL2D-2 3.5 3.5 7.0 50 6 9° 50.00 42.50 AL2D-2 4 4.0 8.0 50 6 9° 42.50 36.13 AL2D-2 4.5 4.5 9.0 55 6 9° 55.00 46.75 AL2D-2 5 5.0 10.0 55 6 9° 46.50 39.53 AL2D-2 5.5 5.5 11.0 55 6 9° 57.00 48.45 AL2D-2 6 6.0 12.0 55 6 – 49.00 41.65 AL2D-2 7 7.0 14.0 70 8 9° 90.50 76.93 AL2D-2 8 8.0 16.0 70 8 – 90.50 76.93 AL2D-2 9 9.0 18.0 75 10 9° 118.00 100.30 AL2D-2 10 10.0 20.0 75 10 – 118.00 100.30 AL2D-2 11 11.0 22.0 80 12 9° 171.50 145.78 AL2D-2 12 12.0 24.0 80 12 – 171.50 145.78

▪ DC

15%

RABATT

AL3D-2

▪ Die AL-Serie realisiert hochpräzise, stabile Bearbeitungen La série AL permet des usinages très précis avec une grande stabilité

AL4D-2

▪ Die AL-Serie realisiert hochpräzise, stabile Bearbeitungen La série AL permet des usinages très précis avec une grande stabilité

▪ Werkzeug poliert und geläppt | Outil poli et rodé

▪ DC Toleranz 0/-0.02

37 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel AL3D-2 1 1.0 3.0 45 4 9° 47.50 40.38 AL3D-2 1.5 1.5 4.5 45 4 9° 47.50 40.38 AL3D-2 2 2.0 6.0 45 4 9° 47.50 40.38 AL3D-2 2.5 2.5 7.5 45 4 9° 47.50 40.38 AL3D-2 3 3.0 9.0 50 6 9° 61.00 51.85 AL3D-2 4 4.0 12.0 50 6 9° 63.00 53.55 AL3D-2 5 5.0 15.0 55 6 9° 67.00 56.95 AL3D-2 6 6.0 18.0 60 6 – 71.00 60.35 AL3D-2 7 7.0 21.0 70 8 9° 114.00 96.90 AL3D-2 8 8.0 24.0 70 8 – 114.00 96.90 AL3D-2 9 9.0 27.0 75 10 9° 142.50 121.13 AL3D-2 10 10.0 30.0 75 10 – 142.50 121.13 AL3D-2 11 11.0 33.0 90 12 9° 196.00 166.60 AL3D-2 12 12.0 36.0 90 12 – 196.00 166.60

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel AL4D-2 1 1.0 4.0 50 4 9° 62.00 52.70 AL4D-2 1.5 1.5 6.0 50 4 9° 62.00 52.70 AL4D-2 2 2.0 8.0 50 4 9° 62.00 52.70 AL4D-2 2.5 2.5 10.0 50 4 9° 62.00 52.70 AL4D-2 3 3.0 12.0 55 6 9° 75.50 64.18 AL4D-2 4 4.0 16.0 60 6 9° 78.50 66.73 AL4D-2 5 5.0 20.0 65 6 9° 84.50 71.83 AL4D-2 6 6.0 24.0 75 6 – 94.50 80.33 AL4D-2 7 7.0 28.0 90 8 9° 142.50 121.13 AL4D-2 8 8.0 32.0 90 8 – 142.50 121.13 AL4D-2 9 9.0 36.0 100 10 9° 194.50 165.33 AL4D-2 10 10.0 40.0 100 10 – 194.50 165.33 AL4D-2 11 11.0 44.0 110 12 9° 246.00 209.10 AL4D-2 12 12.0 48.0 110 12 – 246.00 209.10

▪ Werkzeug

▪ DC Toleranz 0/-0.02 15% RABATT 15% RABATT

poliert und geläppt | Outil poli et rodé

AL5D-2

▪ Die AL-Serie realisiert hochpräzise, stabile Bearbeitungen

La série AL permet des usinages très précis avec une grande stabilité

ALZ345

▪ Die AL-Serie realisiert eine stabile und hoch effiziente Bearbeitung

La série AL permet des usinages très précis avec une grande stabilité

▪ Werkzeug poliert und geläppt | Outil poli et rodé

▪ DC Toleranz 0/-0.02

15% RABATT

38 PREALPINA SUISSE GmbH – 2023

Artikel-Nr. | Réf. d’article DC APMX OAL DCON BHTA Preis | Prix CHF Aktionspreis Prix promotionnel AL5D-2 1 1.0 5.0 50 4 9° 76.50 65.03 AL5D-2 1.5 1.5 7.5 50 4 9° 76.50 65.03 AL5D-2 2 2.0 10.0 50 4 9° 76.50 65.03 AL5D-2 2.5 2.5 12.5 50 4 9° 76.50 65.03 AL5D-2 3 3.0 15.0 55 6 9° 89.50 76.08 AL5D-2 4 4.0 20.0 60 6 9° 94.50 80.33 AL5D-2 5 5.0 25.0 65 6 9° 99.00 84.15 AL5D-2 6 6.0 30.0 75 6 – 117.00 99.45 AL5D-2 7 7.0 35.0 90 8 9° 172.50 146.63 AL5D-2 8 8.0 40.0 90 8 – 172.50 146.63 AL5D-2 9 9.0 45.0 100 10 9° 244.50 207.83 AL5D-2 10 10.0 50.0 100 10 – 244.50 207.83 AL5D-2 11 11.0 55.0 110 12 9° 294.00 249.90 AL5D-2 12 12.0 60.0 110 12 – 294.00 249.90

Artikel-Nr. | Réf. d’article DC DN APMX LU OAL DCON BHTA Type Preis | Prix CHF Aktionspreis Prix promotionnel ALZ345 1x3 (Type B) 1.0 0.95 1.5 3.0 45 4 12° B 50.00 42.50 ALZ345 1x5 (Type B)  5.0 60 58.00 49.30 ALZ345 1.1x3.3 (Type B) 1.1 1.05 1.7 3.3 45 4 12° B 74.00 62.90 ALZ345 1.2x3.6 (Type B) 1.2 1.15 1.8 3.6 45 4 12° B 74.00 62.90 ALZ345 1.3x3.9 (Type B) 1.3 1.25 2.0 3.9 45 4 12° B 74.00 62.90 ALZ345 1.4x4.2 (Type B) 1.4 1.35 2.1 4.2 45 4 12° B 74.00 62.90 ALZ345 1.5x4.5 (Type B) 1.5 1.45 2.3 4.5 45 4 12° B 50.00 42.50 ALZ345 1.6x4.8 (Type B) 1.6 1.55 2.4 4.8 45 4 12° B 74.00 62.90 ALZ345 1.7x5.1 (Type B) 1.7 1.65 2.6 5.1 45 4 12° B 74.00 62.90 ALZ345 1.8x5.4 (Type B) 1.8 1.74 2.7 5.4 45 4 12° B 74.00 62.90 ALZ345 1.9x5.7 (Type B) 1.9 1.84 2.9 5.7 45 4 12° B 74.00 62.90 ALZ345 2x6 (Type B) 2.0 1.94 3.0 6.0 45 4 12° B 50.00 42.50 ALZ345 2x10 (Type B)  10.0 60 58.00 49.30

▪ Verbesserte Bohrleistung!

en perçage! ▪ DC Toleranz 0/-0.02 

VERFÜGBAR  NOUVEAUX Ø DISPONIBLES 15% RABATT Fortsetzung auf der nächsten Seite | Suite à la page suivante

| Amélioration conséquente

NEUE Ø

ALZ345

39 PREALPINA SUISSE GmbH – 2023 Artikel-Nr. | Réf. d’article DC DN APMX LU OAL DCON BHTA Type Preis | Prix CHF Aktionspreis Prix promotionnel ALZ345 2.1x6.3 (Type B) 2.1 2.00 3.2 6.3 45 4 12° B 74.00 62.90 ALZ345 2.2x6.6 (Type B) 2.2 2.10 3.3 6.6 45 4 12° B 74.00 62.90 ALZ345 2.3x6.9 (Type B) 2.3 2.20 3.5 6.9 45 4 12° B 74.00 62.90 ALZ345 2.4x7.2 (Type B) 2.4 2.30 3.6 7.2 45 4 12° B 74.00 62.90 ALZ345 2.5x7.5 (Type B) 2.5 2.40 3.8 7.5 45 4 12° B 50.00 42.50 ALZ345 2.6x7.8 (Type B) 2.6 2.45 3.9 7.8 55 6 12° B 95.50 81.18 ALZ345 2.7x8.1 (Type B) 2.7 2.55 4.1 8.1 55 6 12° B 95.50 81.18 ALZ345 2.8x8.4 (Type B) 2.8 2.65 4.2 8.4 55 6 12° B 95.50 81.18 ALZ345 2.9x8.7 (Type B) 2.9 2.75 4.4 8.7 55 6 12° B 95.50 81.18 ALZ345 3x9 (Type B) 3.0 2.85 4.5 9.0 55 6 12° B 64.00 54.40 ALZ345 3x15 (Type B)  15.0 60 73.50 62.48 ALZ345 3.1x9.3 (Type B) 3.1 2.95 4.7 9.3 55 6 12° B 95.50 81.18 ALZ345 3.2x9.6 (Type B) 3.2 3.05 4.8 9.6 55 6 12° B 95.50 81.18 ALZ345 3.3x9.9 (Type B) 3.3 3.15 5.0 9.9 55 6 12° B 95.50 81.18 ALZ345 3.4x10.2 (Type B) 3.4 3.25 5.1 10.2 55 6 12° B 95.50 81.18 ALZ345 3.5x10.5 (Type B) 3.5 3.35 5.3 10.5 55 6 12° B 77.50 65.88 ALZ345 3.6x10.8 (Type B) 3.6 3.45 5.4 10.8 55 6 12° B 95.50 81.18 ALZ345 3.7x11.1 (Type B) 3.7 3.55 5.6 11.1 55 6 12° B 95.50 81.18 ALZ345 3.8x11.4 (Type B) 3.8 3.65 5.7 11.4 55 6 12° B 95.50 81.18 ALZ345 3.9x11.7 (Type B) 3.9 3.75 5.9 11.7 55 6 12° B 95.50 81.18 ALZ345 4x12 (Type B) 4.0 3.80 6.0 12.0 55 6 12° B 66.00 56.10 ALZ345 4x20 (Type B)  20.0 70 82.50 70.13 ALZ345 4.1x12.3 (Type B) 4.1 3.90 6.2 12.3 55 6 12° B 100.50 85.43 ALZ345 4.2x12.6 (Type B) 4.2 4.00 6.3 12.6 55 6 12° B 100.50 85.43 ALZ345 4.3x12.9 (Type B) 4.3 4.10 6.5 12.9 55 6 12° B 100.50 85.43 ALZ345 4.4x13.2 (Type B) 4.4 4.20 6.6 13.2 55 6 12° B 100.50 85.43 ALZ345 4.5x13.5 (Type B) 4.5 4.30 6.8 13.5 55 6 12° B 82.50 70.13 ALZ345 4.6x13.8 (Type B) 4.6 4.40 6.9 13.8 55 6 12° B 100.50 85.43 ALZ345 4.7x14.1 (Type B) 4.7 4.50 7.1 14.1 55 6 12° B 100.50 85.43 ALZ345 4.8x14.4 (Type B) 4.8 4.60 7.2 14.4 55 6 12° B 100.50 85.43 ALZ345 4.9x14.7 (Type B) 4.9 4.70 7.4 14.7 55 6 12° B 100.50 85.43 ALZ345 5x15 (Type B) 5.0 4.80 7.5 15.0 55 6 12° B 72.00 61.20 ALZ345 5x25 (Type B)  25.0 80 90.50 76.93 ALZ345 5.1x15.3 (Type B) 5.1 4.90 7.7 15.3 55 6 12° B 108.00 91.80 ALZ345 5.2x15.6 (Type B) 5.2 5.00 7.8 15.6 55 6 12° B 108.00 91.80 ALZ345 5.3x15.9 (Type B) 5.3 5.10 8.0 15.9 55 6 12° B 108.00 91.80 ALZ345 5.4x16.2 (Type B) 5.4 5.20 8.1 16.2 55 6 12° B 108.00 91.80 ALZ345 5.5x16.5 (Type B) 5.5 5.30 8.3 16.5 55 6 12° B 89.50 76.08 ALZ345 5.6x16.8 (Type B) 5.6 5.40 8.4 16.8 55 6 12° B 108.00 91.80 ALZ345 5.7x17.1 (Type B) 5.7 5.50 8.6 17.1 55 6 12° B 108.00 91.80 ALZ345 5.8x17.4 (Type B) 5.8 5.60 8.7 17.4 55 6 12° B 108.00 91.80 ALZ345 5.9x17.7 (Type B) 5.9 5.70 8.9 17.7 55 6 12° B 108.00 91.80 ALZ345 6x110 (Type A)  6.0 –9.0 – 110 6 –A 104.00 88.40 ALZ345 6x18 (Type B) 5.80 18.0 60 B 74.50 63.33 ALZ345 6x30 (Type B)  30.0 80 95.50 81.18 ALZ345 7x21 (Type B) 7.0 6.80 10.5 21.0 70 8 12° B 110.00 93.50 ALZ345 8x120 (Type A)  8.0 –12.0 – 120 8 –A 165.00 140.25 ALZ345 8x24 (Type B) 7.80 24.0 70 B 110.00 93.50 ALZ345 8x40 (Type B)  40.0 90 142.50 121.13 ALZ345 9x27 (Type B) 9.0 8.00 13.5 27.0 75 10 12° B 138.50 117.73 ALZ345 10x130 (Type A)  10.0 –15.0 – 130 10 –A 240.50 204.43 ALZ345 10x30 (Type B) 9.80 30.0 75 B 138.50 117.73 ALZ345 10x50 (Type B)  50.0 100 180.50 153.43 ALZ345 11x33 (Type B) 11.0 10.80 16.5 33.0 80 12 12° B 194.50 165.33 ALZ345 12x150 (Type A)  12.0 –18.0 – 150 12 –A 276.00 234.60 ALZ345 12x36 (Type B) 11.80 36.0 80 B 166.50 141.53 ALZ345 12x60 (Type B)  60.0 110 207.00 175.95

Ab Durchmesser 6.1 bis 12.0 jeder Zehntel ab Werk verfügbar (Preis/Lieferzeit auf Anfrage) Du diamètre 6.1 au diamètre 12.0 mm, disponibles tous les 0.1 mm chez notre fournisseur (prix et délai de livraison sur demande). 15% RABATT

591... VHM - Dynamikfräser Fraises

Trochoidales Fräsen

592... VHM

593...

VHM - Dynamikfräser

40 PREALPINA SUISSE GmbH – 2023

monobloc DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON Preis | Prix HB - VAROCON h9 h6 No d’article 6.0 6.0 18 62 5.8 25 0.1 5 591.060... .00 .10 49.35 39.48 49.88 39.90 8.0 8.0 24 68 7.8 30 0.15 5 591.080... .00 .10 67.20 53.76 68.25 54.60 10.0 10.0 30 80 9.8 35 0.2 5 591.100... .00 .10 89.78 71.82 91.35 73.08 12.0 12.0 36 93 11.8 45 0.2 5 591.120... .00 .10 116.55 93.24 118.13 94.50 16.0 16.0 48 108 15.8 55 0.3 5 591.160... .00 .10 180.60 144.48 182.70 146.16 20.0 20.0 60 126 19.8 70 0.4 5 591.200... .00 .10 289.80 231.84 291.90 233.52

dynamiques carbure

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON Preis | Prix HB - VAROCON h9 h6 No d’article 6.0 6.0 18 62 5.8 25 0.1 5 592.060... .00 .10 59.85 47.88 60.38 48.30 8.0 8.0 24 68 7.8 30 0.15 5 592.080... .00 .10 77.18 61.74 77.70 62.16 10.0 10.0 30 80 9.8 35 0.2 5 592.100... .00 .10 99.75 79.80 100.80 80.64 12.0 12.0 36 93 11.8 45 0.2 5 592.120... .00 .10 124.43 99.54 126.00 100.80 16.0 16.0 48 108 15.8 55 0.3 5 592.160... .00 .10 203.18 162.54 205.28 164.22 20.0 20.0 60 126 19.8 70 0.4 5 592.200... .00 .10 316.05 252.84 318.68 254.94

- Dynamikfräser Fraises dynamiques carbure monobloc

Trochoidales Fräsen

Fraises dynamiques carbure monobloc DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 6.0 6.0 18 62 5.8 25 0.1 5 593.060.10 68.78 55.02 8.0 8.0 24 68 7.8 30 0.15 5 593.080.10 87.68 70.14 10.0 10.0 30 80 9.8 35 0.2 5 593.100.10 110.78 88.62 12.0 12.0 36 93 11.8 45 0.2 5 593.120.10 140.70 112.56 16.0 16.0 48 108 15.8 55 0.3 5 593.160.10 227.33 181.86 20.0 20.0 60 126 19.8 70 0.4 5 593.200.10 341.25 273.00

20% RABATT 20% RABATT 20% RABATT

Trochoidales Fräsen

595... VHM - Hybridfräser

Fraises hybrides carbure monobloc

Trochoidales Fräsen

597...

VHM - Dynamikfräser 2xD Fraises

Trochoidales Fräsen

41 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON Preis | Prix HB - VAROCON h9 h6 No d’article 6.0 6.0 14 54 - - 0.08 4 595.060... .00 .10 42.53 34.02 43.58 34.86 6.0 6.0 23 80 5.6 36 0.08 4 595.063... .00 .10 63.53 50.82 64.05 51.24 8.0 8.0 18 60 - - 0.10 4 595.080... .00 .10 64.58 51.66 65.63 52.50 8.0 8.0 32 100 7.5 55 0.10 4 595.083... .00 .10 82.43 65.94 83.48 66.78 10.0 10.0 22 70 - - 0.10 4 595.100... .00 .10 79.28 63.42 80.85 64.68 10.0 10.0 40 100 9.5 58 0.10 4 595.103... .00 .10 111.30 89.04 112.88 90.30 12.0 12.0 26 83 - - 0.15 4 595.120... .00 .10 108.68 86.94 109.73 87.78 12.0 12.0 45 110 11.0 65 0.15 4 595.123... .00 .10 144.38 115.50 145.95 116.76 16.0 16.0 34 92 - - 0.20 4 595.160... .00 .10 191.10 152.88 192.68 154.14 16.0 16.0 55 150 15.0 90 0.20 4 595.163... .00 .10 225.23 180.18 227.33 181.86 20.0 20.0 42 104 - - 0.25 4 595.200... .00 .10 280.88 224.70 283.50 226.80 20.0 20.0 65 150 19.0 100 0.25 4 595.203... .00 .10 340.20 272.16 342.30 273.84

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 6.0 6.0 13 57 5.8 19 0.12 7 597.060.00 61.95 49.56 8.0 8.0 19 63 7.8 25 0.16 7 597.080.00 93.98 75.18 10.0 10.0 22 72 9.8 30 0.20 7 597.100.00 98.18 78.54 12.0 12.0 26 83 11.8 36 0.24 7 597.120.00 120.23 96.18 16.0 16.0 32 92 15.8 42 0.32 7 597.160.00 205.80 164.64 20.0 20.0 41 104 19.8 52 0.40 7 597.200.00 410.55 328.44 NEW

20% RABATT 20% RABATT

dynamiques carbure monobloc 2xD

598... VHM - Dynamikfräser 3xD Fraises

789... VHM - Schaftfräser

728...

42 PREALPINA SUISSE GmbH – 2023

dynamiques carbure monobloc 3xD DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 6.0 6.0 18 62 5.8 25 0.12 7 598.060.00 81.90 65.52 8.0 8.0 24 68 7.8 30 0.16 7 598.080.00 107.10 85.68 10.0 10.0 30 80 9.8 35 0.20 7 598.100.00 138.08 110.46 12.0 12.0 36 93 11.8 45 0.24 7 598.120.00 167.48 133.98 16.0 16.0 48 108 15.8 55 0.32 7 598.160.00 308.70 246.96 20.0 20.0 60 126 19.8 70 0.40 7 598.200.00 443.10 354.48 NEW Trochoidales

Fräsen

Turbomax

toriques carbure monobloc DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - naco blue Preis | Prix HB - naco blue h9 h6 No d’article 6.0 6.0 13 57 5.5 21 0.2 4 789.060... .00 .10 37.28 29.82 38.33 30.66 8.0 8.0 19 63 7.5 27 0.2 5 789.080... .00 .10 56.18 44.94 57.23 45.78 10.0 10.0 22 72 9.5 32 0.3 5 789.100... .00 .10 79.28 63.42 80.85 64.68 12.0 12.0 26 83 11.5 38 0.3 5 789.120... .00 .10 96.60 77.28 98.18 78.54 16.0 16.0 32 92 15.5 44 0.4 5 789.160... .00 .10 174.30 139.44 176.40 141.12 20.0 20.0 38 104 19.5 54 0.5 5 789.200... .00 .10 261.45 209.16 264.08 211.26

Fraises

Trochoidales Fräsen

cylindrique

20% RABATT 20% RABATT DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix TIALN Aktionspreis | Prix promotionnel h9 h6 No d’article 5.0 6.0 21 63 4.7 27 0.18 4 728.051.10 52.50 42.00 6.0 6.0 22 63 5.5 27 0.2 4 728.061.10 52.50 42.00 8.0 8.0 28 80 7.5 40 0.2 4 728.081.10 65.10 52.08 10.0 10.0 33 100 9.5 55 0.3 4 728.101.10 83.48 66.78 12.0 12.0 42 100 11.0 55 0.3 4 728.121.10 108.15 86.52 14.0 14.0 48 110 13.0 60 0.3 4 728.141.10 132.83 106.26 16.0 16.0 53 150 15.0 67 0.4 4 728.161.10 197.93 158.34 20.0 20.0 68 150 19.0 85 0.5 4 728.201.10 285.08 228.06 25.0 25.0 85 165 24.0 100 0.5 4 728.251.10 494.55 395.64 20% RABATT

VHM - Schaftfräser Starmax Typ N-H extra lang Fraises

à queue

carbure monobloc extra longue Starmax

731...

VHM - Schaftfräser Starmax

Fraises à queue cylindrique carbure monobloc Starmax

732...

VHM - Schaftfräser Starmax

Fraises à queue cylindrique carbure monobloc Starmax

43 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix TIALN Aktionspreis | Prix promotionnel h9 h6 No d’article 3.0 6.0 6 54 0.1 4 731.030.00 26.78 21.42 4.0 6.0 8 54 0.13 4 731.040.00 26.78 21.42 5.0 6.0 9 54 0.18 4 731.050.00 26.78 21.42 5.5 6.0 10 54 0.2 4 731.055.00 26.78 21.42 6.0 6.0 10 54 0.2 4 731.060.00 26.78 21.42 7.0 8.0 12 58 0.2 4 731.070.00 35.18 28.14 7.5 8.0 12 58 0.2 4 731.075.00 35.18 28.14 8.0 8.0 12 58 0.2 4 731.080.00 35.18 28.14 9.0 10.0 14 66 0.3 4 731.090.00 48.83 39.06 9.5 10.0 14 66 0.3 4 731.095.00 48.83 39.06 10.0 10.0 14 66 0.3 4 731.100.00 48.83 39.06 11.0 12.0 16 73 0.3 4 731.110.00 63.00 50.40 11.5 12.0 16 73 0.3 4 731.115.00 58.28 46.62 12.0 12.0 16 73 0.3 4 731.120.00 63.00 50.40 13.0 14.0 18 75 0.3 4 731.130.00 78.23 62.58 13.5 14.0 18 75 0.3 4 731.135.00 73.50 58.80 14.0 14.0 18 75 0.3 4 731.140.00 78.23 62.58 15.5 16.0 22 82 0.3 4 731.155.00 101.33 81.06 16.0 16.0 22 82 0.4 4 731.160.00 101.33 81.06 17.5 18.0 24 84 0.4 4 731.175.00 139.65 111.72 18.0 18.0 24 84 0.4 4 731.180.00 149.10 119.28 19.5 20.0 26 92 0.4 4 731.195.00 151.20 120.96 20.0 20.0 26 92 0.5 4 731.200.00 155.93 124.74 25.0 25.0 32 92 0.5 4 731.250.00 360.15 288.12 20% RABATT

DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix TIALN Aktionspreis | Prix promotionnel h6 No d’article 3.0 6 8 57 0.1 4 732.030.00 30.45 24.36 4.0 6 11 57 0.13 4 732.040.00 30.45 24.36 5.0 6 13 57 0.18 4 732.050.00 30.45 24.36 6.0 6 13 57 0.2 4 732.060.00 30.45 24.36 7.0 8 19 63 0.2 4 732.070.00 40.95 32.76 8.0 8 19 63 0.2 4 732.080.00 40.95 32.76 9.0 10 22 72 0.3 4 732.090.00 59.33 47.46 10.0 10 22 72 0.3 4 732.100.00 59.33 47.46 11.0 12 16 83 0.3 4 732.110.00 74.55 59.64 12.0 12 26 83 0.3 4 732.120.00 74.55 59.64 13.0 14 26 83 0.3 4 732.130.00 100.28 80.22 14.0 14 26 83 0.3 4 732.140.00 100.28 80.22 16.0 16 32 92 0.4 4 732.160.00 130.20 104.16 18.0 18 32 92 0.4 4 732.180.00 180.08 144.06 20.0 20 38 104 0.5 4 732.200.00 197.93 158.34 25.0 25 38 104 0.5 4 732.250.00 405.83 324.66 20% RABATT

733...

VHM - Schaftfräser Starmax

Fraises à queue cylindrique carbure monobloc Starmax

231...

VHM - Schaftfräser Fightmax kurz

Fraises à queue cylindrique carbure monobloc courte Fightmax

44 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - TIALN Preis | Prix HB - TIALN h9 h6 No d’article 3.0 6.0 8 57 2.8 18 0.13 4 733.030... .00 .99 34.13 27.30 35.18 28.14 4.0 6.0 11 57 3.6 21 0.18 4 733.040... .00 .99 34.13 27.30 35.18 28.14 5.0 6.0 13 57 4.6 21 0.2 4 733.050... .00 .99 34.13 27.30 35.18 28.14 6.0 6.0 13 57 5.5 21 0.2 4 733.060... .00 .99 34.13 27.30 35.18 28.14 7.0 8.0 19 63 6.5 27 0.2 4 733.070... .00 .99 45.68 36.54 46.73 37.38 8.0 8.0 19 63 7.5 27 0.2 4 733.080... .00 .99 45.68 36.54 46.73 37.38 9.0 10.0 22 72 8.5 32 0.3 4 733.090... .00 .99 64.05 51.24 65.63 52.50 10.0 10.0 22 72 9.5 32 0.3 4 733.100... .00 .99 64.05 51.24 65.63 52.50 11.0 12.0 26 83 10.5 38 0.3 4 733.110... .00 .99 79.28 63.42 80.85 64.68 12.0 12.0 26 83 11.5 38 0.3 4 733.120... .00 .99 79.28 63.42 80.85 64.68 13.0 14.0 26 83 12.5 42 0.3 4 733.130... .00 .99 103.43 82.74 105.00 84.00 14.0 14.0 26 83 13.5 42 0.3 4 733.140... .00 .99 103.43 82.74 105.00 84.00 16.0 16.0 32 92 15.5 44 0.4 4 733.160... .00 .99 134.93 107.94 137.03 109.62 18.0 18.0 32 100 17.5 50 0.4 4 733.180... .00 .99 184.80 147.84 186.90 149.52 20.0 20.0 38 104 19.5 54 0.5 4 733.200... .00 .99 203.70 162.96 205.80 164.64 25.0 25.0 42 121 24.0 65 0.5 4 733.250... .00 .99 412.65 330.12 418.43 334.74 20% RABATT

DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON+ Preis | Prix HB - VAROCON+ h9 h6 No d’article 3.0 6.0 6 54 0.06 4 231.030... .00 .10 48.83 39.06 49.88 39.90 4.0 6.0 8 54 0.08 4 231.040... .00 .10 48.83 39.06 49.88 39.90 5.0 6.0 9 54 0.10 4 231.050... .00 .10 48.83 39.06 49.88 39.90 6.0 6.0 10 54 0.13 4 231.060... .00 .10 48.83 39.06 49.88 39.90 8.0 8.0 12 58 0.15 4 231.080... .00 .10 61.43 49.14 63.00 50.40 10.0 10.0 14 66 0.20 4 231.100... .00 .10 88.73 70.98 90.83 72.66 12.0 12.0 16 73 0.25 4 231.120... .00 .10 118.13 94.50 119.70 95.76 16.0 16.0 22 82 0.35 4 231.160... .00 .10 221.55 177.24 224.18 179.34 20.0 20.0 26 92 0.40 4 231.200... .00 .10 290.85 232.68 294.00 235.20 20% RABATT

233...

VHM - Schaftfräser Fightmax lang

Fraises à queue cylindrique carbure monobloc longue Fightmax

VHM - Schaftfräser Fightmax extra lang

Fraises à queue cylindrique carbure monobloc extra longue Fightmax

45 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON+ Preis | Prix HB - VAROCON+ h9 h6 No d’article 3.0 6.0 8 57 2.8 18 0.06 4 233.030... .00 .10 54.08 43.26 55.13 44.10 4.0 6.0 11 57 3.6 21 0.08 4 233.040... .00 .10 54.08 43.26 55.13 44.10 5.0 6.0 13 57 4.6 21 0.10 4 233.050... .00 .10 54.08 43.26 55.13 44.10 6.0 6.0 13 57 5.5 21 0.13 4 233.060... .00 .10 54.08 43.26 55.13 44.10 8.0 8.0 19 63 7.5 27 0.15 4 233.080... .00 .10 68.78 55.02 69.83 55.86 10.0 10.0 22 72 9.5 32 0.20 4 233.100... .00 .10 98.18 78.54 100.28 80.22 12.0 12.0 26 83 11.5 38 0.25 4 233.120... .00 .10 130.73 104.58 132.83 106.26 16.0 16.0 32 92 15.5 44 0.35 4 233.160... .00 .10 246.23 196.98 248.85 199.08 20.0 20.0 38 104 19.5 54 0.40 4 233.200... .00 .10 323.40 258.72 326.55 261.24 20% RABATT

234...

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON+ Preis | Prix HB - VAROCON+ h9 h6 No d’article 6.0 6.0 22 80 5.5 42 0.13 4 234.060... .00 .10 65.10 52.08 66.68 53.34 8.0 8.0 28 100 7.5 62 0.15 4 234.080... .00 .10 96.08 76.86 97.13 77.70 10.0 10.0 33 100 9.5 58 0.20 4 234.100... .00 .10 137.03 109.62 138.60 110.88 12.0 12.0 42 120 11.5 73 0.25 4 234.120... .00 .10 194.25 155.40 196.35 157.08 16.0 16.0 53 150 15.5 100 0.35 4 234.160... .00 .10 391.13 312.90 394.28 315.42 20.0 20.0 68 150 19.5 98 0.40 4 234.200... .00 .10 521.33 417.06 524.48 419.58 20% RABATT

287...

VHM - Schaftfräser Fightmax INOX kurz

Fraises à queue cylindrique carbure monobloc courte Fightmax

VHM - Schaftfräser Fightmax INOX lang

Fraises à queue cylindrique carbure monobloc longue INOX

46 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix HA - DUOCON Preis | Prix HB - DUOCON h9 h6 No d’article 3.0 6.0 6 54 0.06 4 287.030... .00 .10 53.03 42.42 54.60 43.68 4.0 6.0 8 54 0.08 4 287.040... .00 .10 53.03 42.42 54.60 43.68 5.0 6.0 9 54 0.10 4 287.050... .00 .10 53.03 42.42 54.60 43.68 6.0 6.0 10 54 0.13 4 287.060... .00 .10 53.03 42.42 54.60 43.68 8.0 8.0 12 58 0.15 4 287.080... .00 .10 70.35 56.28 71.40 57.12 10.0 10.0 14 66 0.20 4 287.100... .00 .10 89.78 71.82 91.35 73.08 12.0 12.0 16 73 0.25 4 287.120... .00 .10 119.70 95.76 121.28 97.02 16.0 16.0 22 82 0.35 4 287.160... .00 .10 208.95 167.16 211.58 169.26 20.0 20.0 26 92 0.40 4 287.200... .00 .10 291.38 233.10 294.53 235.62 20% RABATT

288...

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - DUOCON Preis | Prix HB - DUOCON h9 h6 No d’article 3.0 6.0 8 57 2.8 18 0.06 4 288.030... .00 .10 56.18 44.94 57.75 46.20 4.0 6.0 11 57 3.6 21 0.08 4 288.040... .00 .10 56.18 44.94 57.75 46.20 5.0 6.0 13 57 4.6 21 0.10 4 288.050... .00 .10 56.18 44.94 57.75 46.20 6.0 6.0 13 57 5.5 21 0.13 4 288.060... .00 .10 56.18 44.94 57.75 46.20 8.0 8.0 19 63 7.5 27 0.15 4 288.080... .00 .10 74.55 59.64 76.13 60.90 10.0 10.0 22 72 9.5 32 0.20 4 288.100... .00 .10 104.48 83.58 106.58 85.26 12.0 12.0 26 83 11.5 38 0.25 4 288.120... .00 .10 137.55 110.04 139.13 111.30 16.0 16.0 32 92 15.5 44 0.35 4 288.160... .00 .10 243.08 194.46 245.70 196.56 20.0 20.0 38 104 19.5 54 0.40 4 288.200... .00 .10 330.75 264.60 333.90 267.12 20% RABATT

1.388... VHM - INOX-Hochleistungsfräser

Fraises carbure monobloc hautes

performances INOX

1.390... VHM - INOX-Hochleistungsfräser

Fraises carbure monobloc hautes performances INOX

47 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 3.0 6.0 6 54 0.1 4 1.388.030.10 28.88 23.10 4.0 6.0 8 54 0.13 4 1.388.040.10 28.88 23.10 5.0 6.0 9 54 0.18 4 1.388.050.10 28.88 23.10 6.0 6.0 10 54 0.2 4 1.388.060.10 28.88 23.10 8.0 8.0 12 58 0.2 4 1.388.080.10 35.70 28.56 10.0 10.0 14 66 0.2 4 1.388.100.10 49.88 39.90 12.0 12.0 16 73 0.3 4 1.388.120.10 70.35 56.28 16.0 16.0 22 82 0.3 4 1.388.160.10 120.23 96.18 20.0 20.0 26 92 0.4 4 1.388.200.10 180.08 144.06 20% RABATT

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - VAROCON Preis | Prix HB - VAROCON h9 h6 No d’article 3.0 6.0 8 57 2.75 18 0.1 4 1.390.030... .00 .10 34.13 27.30 35.70 28.56 4.0 6.0 11 57 3.5 21 0.13 4 1.390.040... .00 .10 34.13 27.30 35.70 28.56 5.0 6.0 13 57 4.5 21 0.2 4 1.390.050... .00 .10 34.13 27.30 35.70 28.56 6.0 6.0 13 57 5.5 21 0.2 4 1.390.060... .00 .10 34.13 27.30 35.70 28.56 7.0 8.0 16 63 6.5 24 0.2 4 1.390.070... .00 .10 46.20 36.96 47.78 38.22 8.0 8.0 19 63 7.5 27 0.2 4 1.390.080... .00 .10 46.20 36.96 47.78 38.22 9.0 10.0 20 72 8.5 29 0.2 4 1.390.090... .00 .10 60.38 48.30 63.00 50.40 10.0 10.0 22 72 9.5 32 0.2 4 1.390.100... .00 .10 63.00 50.40 65.63 52.50 11.0 12.0 24 83 10.5 35 0.3 4 1.390.110... .00 .10 82.95 66.36 85.58 68.46 12.0 12.0 26 83 11.5 38 0.3 4 1.390.120... .00 .10 86.63 69.30 89.25 71.40 13.0 14.0 28 83 12.5 40 0.3 4 1.390.130... .00 .10 102.38 81.90 104.48 83.58 14.0 14.0 30 83 13.5 42 0.3 4 1.390.140... .00 .10 110.78 88.62 112.35 89.88 16.0 16.0 32 92 15.5 44 0.3 4 1.390.160... .00 .10 132.83 106.26 135.98 108.78 20.0 20.0 38 104 19.5 54 0.4 4 1.390.200... .00 .10 196.88 157.50 200.55 160.44 20% RABATT

1.392... VHM - INOX-Hochleistungsfräser

1.395...

VHM - INOX-Hochleistungsfräser überlang

Fraises

carbure monobloc

hautes performances INOX très longue

2.405...

VHM - Schaftfräser mit Innenkühlung

48 PREALPINA SUISSE GmbH – 2023

Fraises carbure monobloc hautes performances INOX DC DCON APMX OAL DN LU ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 3.0 6.0 8 57 2.75 18 4 1.392.030.10 35.70 28.56 4.0 6.0 11 57 3.5 21 4 1.392.040.10 35.70 28.56 5.0 6.0 13 57 4.5 21 4 1.392.050.10 35.70 28.56 6.0 6.0 13 57 5.5 21 4 1.392.060.10 35.70 28.56 8.0 8.0 19 63 7.5 27 4 1.392.080.10 47.78 38.22 10.0 10.0 22 72 9.5 32 4 1.392.100.10 65.63 52.50 12.0 12.0 26 83 11.5 38 4 1.392.120.10 89.25 71.40 16.0 16.0 32 92 15.5 44 4 1.392.160.10 135.98 108.78 20.0 20.0 38 104 19.5 54 4 1.392.200.10 200.55 160.44

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix VAROCON Aktionspreis | Prix promotionnel h9 h6 No d’article 6.0 6.0 22 63 5.5 30 0.2 4 1.395.060.10 51.98 41.58 8.0 8.0 28 80 7.5 36 0.2 4 1.395.080.10 61.95 49.56 10.0 10.0 33 100 9.5 54 0.2 4 1.395.100.10 94.50 75.60 12.0 12.0 42 100 11.5 54 0.3 4 1.395.120.10 115.50 92.40 14.0 14.0 48 100 13.5 54 0.3 4 1.395.140.10 165.90 132.72 16.0 16.0 53 150 15.5 69 0.3 4 1.395.160.10 225.75 180.60 18.0 18.0 65 150 17.5 84 0.4 4 1.395.180.10 299.25 239.40 20.0 20.0 68 150 19.5 84 0.4 4 1.395.200.10 347.55 278.04 NEW 20% RABATT 20% RABATT

queue cylindrique carbure monobloc avec arrosage interne NEW DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 6.0 6.0 10 80 5.8 42 0.1 3 2.405.060... .00 .10 107.10 85.68 108.68 86.94 8.0 8.0 13 100 7.8 62 0.1 3 2.405.080... .00 .10 131.25 105.00 132.30 105.84 10.0 10.0 16 100 9.7 58 0.2 3 2.405.100... .00 .10 153.30 122.64 154.88 123.90 12.0 12.0 19 120 11.7 73 0.2 3 2.405.120... .00 .10 197.40 157.92 199.50 159.60 16.0 16.0 25 150 15.7 92 0.2 3 2.405.160... .00 .10 308.18 246.54 310.80 248.64 20.0 20.0 32 150 19.5 100 0.2 3 2.405.200... .00 .10 421.58 337.26 424.20 339.36 20% RABATT

Fraises à

2.404... VHM - Schaftfräser Fraises à queue cylindrique carbure monobloc

2.406...

VHM - Schaftfräser Fraises à queue cylindrique

49 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 1.0 4.0 3 50 0.9 8 0.05 3 2.404.010... .00 - 51.98 41.581.5 4.0 5 50 1.4 13 0.05 3 2.404.015... .00 - 51.98 41.581.8 4.0 5 50 1.7 13 0.05 3 2.404.018... .00 - 51.98 41.582.0 4.0 6 50 1.9 15 0.05 3 2.404.020... .00 - 51.98 41.583.0 6.0 7 80 2.9 20 0.05 3 2.404.030... .00 - 53.55 42.844.0 6.0 7 80 3.9 24 0.10 3 2.404.040... .00 .10 53.55 42.84 55.13 44.10 5.0 6.0 8 80 4.9 30 0.10 3 2.404.050... .00 .10 53.55 42.84 55.13 44.10 6.0 6.0 10 80 5.8 42 0.20 3 2.404.060... .00 .10 53.55 42.84 55.13 44.10 8.0 8.0 13 100 7.8 62 0.20 3 2.404.080... .00 .10 74.55 59.64 75.60 60.48 10.0 10.0 16 100 9.7 58 0.20 3 2.404.100... .00 .10 99.75 79.80 101.33 81.06 12.0 12.0 19 120 11.7 73 0.20 3 2.404.120... .00 .10 147.00 117.60 148.58 118.86 16.0 16.0 25 150 15.7 92 0.20 3 2.404.160... .00 .10 274.58 219.66 276.68 221.34 20.0 20.0 32 150 19.5 100 0.20 3 2.404.200... .00 .10 390.60 312.48 393.23 314.58 NEW 20% RABATT

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 3.0 6.0 12 57 2.9 16 0.1 3 2.406.030... .00 .10 44.10 35.28 45.15 36.12 4.0 6.0 12 57 3.9 18 0.1 3 2.406.040... .00 .10 44.10 35.28 45.15 36.12 5.0 6.0 15 57 4.9 18 0.1 3 2.406.050... .00 .10 44.10 35.28 45.15 36.12 6.0 6.0 15 57 5.8 21 0.1 3 2.406.060... .00 .10 44.10 35.28 45.15 36.12 8.0 8.0 22 64 7.8 28 0.1 3 2.406.080... .00 .10 49.35 39.48 50.40 40.32 10.0 10.0 25 73 9.7 33 0.2 3 2.406.100... .00 .10 76.13 60.90 77.70 62.16 12.0 12.0 28 84 11.7 39 0.2 3 2.406.120... .00 .10 109.20 87.36 110.78 88.62 14.0 14.0 32 89 13.7 42 0.2 3 2.406.140... .00 .10 167.48 133.98 169.05 135.24 16.0 16.0 35 93 15.7 45 0.2 3 2.406.160... .00 .10 182.70 146.16 184.80 147.84 20.0 20.0 41 104 19.5 52 0.2 3 2.406.200... .00 .10 282.98 226.38 285.60 228.48 NEW 20% RABATT

carbure monobloc

2.413... VHM - Schruppfräser Primus

VHM - Schruppfräser Primus mit Innenkühlung

Fraises dʼébauche carbure monobloc avec arrosage interne

50 PREALPINA SUISSE GmbH – 2023

Fraises dʼébauche carbure monobloc Primus DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 6.0 6.0 14 57 5.7 20 0.20 3 2.413.060... .00 .10 79.80 63.84 80.85 64.68 8.0 8.0 21 63 7.4 26 0.25 3 2.413.080... .00 .10 92.40 73.92 93.45 74.76 10.0 10.0 23 72 9.5 31 0.30 3 2.413.100... .00 .10 112.88 90.30 114.45 91.56 12.0 12.0 27 83 11.0 37 0.35 3 2.413.120... .00 .10 138.60 110.88 140.18 112.14 16.0 16.0 36 92 15.0 43 0.40 3 2.413.160... .00 .10 190.05 152.04 192.68 154.14 20.0 20.0 41 104 19.0 52 0.40 3 2.413.200... .00 .10 267.23 213.78 270.38 216.30 NEW 20% RABATT

Dynamikfräser Fraises dynamiques carbure monobloc DC DCON APMX OAL CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 6.0 6.0 21 62 0.2 3 2.414.060... .00 .10 79.28 63.42 80.33 64.26 8.0 8.0 28 68 0.2 3 2.414.080... .00 .10 86.10 68.88 87.15 69.72 10.0 10.0 35 80 0.2 3 2.414.100... .00 .10 114.98 91.98 116.55 93.24 12.0 12.0 42 93 0.2 3 2.414.120... .00 .10 171.68 137.34 173.25 138.60 16.0 16.0 56 108 0.2 3 2.414.160... .00 .10 244.13 195.30 246.75 197.40 20.0 20.0 70 126 0.2 3 2.414.200... .00 .10 344.40 275.52 347.55 278.04

2.414... VHM -

20% RABATT

NEW Trochoidales Fräsen

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 6.0 6.0 14 57 5.7 20 0.20 3 251.060... .00 .10 94.50 75.60 95.55 76.44 8.0 8.0 21 63 7.4 26 0.25 3 251.080... .00 .10 109.20 87.36 110.25 88.20 10.0 10.0 23 72 9.5 31 0.30 3 251.100... .00 .10 133.35 106.68 134.93 107.94 12.0 12.0 27 83 11.0 37 0.35 3 251.120... .00 .10 163.80 131.04 165.38 132.30 16.0 16.0 36 92 15.0 43 0.40 3 251.160... .00 .10 224.70 179.76 226.80 181.44 20.0 20.0 41 104 19.0 52 0.40 3 251.200... .00 .10 316.05 252.84 318.15 254.52 251... 20% RABATT

2.410... VHM - DynamikfräserRE

Fraises dynamiques cabure monobloc avec rayon

VHM - Schaftfräser

51 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU RE ZEFP Artikel-Nr. | Preis | Prix HA - ta-C Preis | Prix HB - ta-C h9 h6 No d’article 6.0 6.0 25 71 5.8 31 0.5 3 2.410.060... .00 .10 66.15 52.92 67.20 53.76 6.0 6.0 25 71 5.8 31 1.0 3 2.410.061... .00 .10 66.15 52.92 67.20 53.76 8.0 8.0 33 80 7.8 41 0.5 3 2.410.080... .00 .10 78.23 62.58 79.28 63.42 8.0 8.0 33 80 7.8 41 1.0 3 2.410.081... .00 .10 78.23 62.58 79.28 63.42 8.0 8.0 33 80 7.9 41 2.0 3 2.410.082... .00 .10 78.23 62.58 79.28 63.42 10.0 10.0 41 95 9.7 51 0.5 3 2.410.100... .00 .10 116.55 93.24 118.13 94.50 10.0 10.0 41 95 9.7 51 1.0 3 2.410.101... .00 .10 116.55 93.24 118.13 94.50 10.0 10.0 41 95 9.7 51 2.0 3 2.410.102... .00 .10 116.55 93.24 118.13 94.50 12.0 12.0 49 109 11.7 61 0.5 3 2.410.120... .00 .10 158.55 126.84 160.13 128.10 12.0 12.0 49 109 11.7 61 1.0 3 2.410.121... .00 .10 158.55 126.84 160.13 128.10 12.0 12.0 49 109 11.7 61 2.0 3 2.410.122... .00 .10 158.55 126.84 160.13 128.10 16.0 16.0 65 132 15.7 81 2.0 3 2.410.160... .00 .10 292.43 233.94 295.05 236.04 16.0 16.0 65 132 15.7 81 3.0 3 2.410.161... .00 .10 292.43 233.94 295.05 236.04 20.0 20.0 82 154 19.5 101 2.0 3 2.410.200... .00 .10 426.83 341.46 429.45 343.56 20.0 20.0 82 154 19.5 101 3.0 3 2.410.201... .00 .10 426.83 341.46 429.45 343.56 NEW Trochoidales Fräsen 20% RABATT 244...

Fraises à queue cylindrique carbure monobloc DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ZrN Preis | Prix HB - ZrN h9 h6 No d’article 3.0 6.0 8 57 2.8 12 0.1 3 244.030... .00 .10 45.68 36.54 46.73 37.38 4.0 6.0 11 57 3.8 18 0.1 3 244.040... .00 .10 45.68 36.54 46.73 37.38 5.0 6.0 13 57 4.8 18 0.1 3 244.050... .00 .10 45.68 36.54 46.73 37.38 6.0 6.0 13 57 5.8 18 0.2 3 244.060... .00 .10 47.78 38.22 48.83 39.06 6.0 6.0 13 80 5.8 42 0.2 3 244.061... .00 .10 64.05 51.24 65.10 52.08 8.0 8.0 21 63 7.8 25 0.2 3 244.080... .00 .10 55.13 44.10 55.65 44.52 8.0 8.0 21 100 7.8 62 0.2 3 244.081... .00 .10 85.05 68.04 86.10 68.88 10.0 10.0 22 72 9.7 30 0.2 3 244.100... .00 .10 93.45 74.76 94.50 75.60 10.0 10.0 22 100 9.7 58 0.2 3 244.101... .00 .10 122.33 97.86 123.90 99.12 12.0 12.0 26 83 11.7 36 0.2 3 244.120... .00 .10 125.48 100.38 127.05 101.64 12.0 12.0 26 120 11.7 73 0.2 3 244.121... .00 .10 174.30 139.44 175.88 140.70 16.0 16.0 36 92 15.7 42 0.2 3 244.160... .00 .10 231.53 185.22 233.63 186.90 16.0 16.0 36 150 15.7 100 0.2 3 244.161... .00 .10 370.65 296.52 372.75 298.20 18.0 18.0 36 92 17.6 42 0.2 3 244.180... .00 .10 255.68 204.54 257.78 206.22 18.0 18.0 36 150 17.6 100 0.2 3 244.181... .00 .10 394.28 315.42 395.85 316.68 20.0 20.0 41 104 19.5 52 0.2 3 244.200... .00 .10 331.28 265.02 333.90 267.12 20.0 20.0 41 150 19.5 98 0.2 3 244.201... .00 .10 475.13 380.10 477.75 382.20 25.0 25.0 50 121 24.5 65 0.3 3 244.250... .00 .10 505.58 404.46 511.35 409.08 20% RABATT

252... VHM - Schruppfräser NE Typ WF mit Innenkühlung

Fraises dʼébauche carbure monobloc avec arrosage interne

253...

VHM - Schruppfräser NE Typ WR mit Innenkühlung

Fraises dʼébauche carbure monobloc avec arrosage interne

52 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ZrN Preis | Prix HB - ZrN h9 h6 No d’article 6.0 6.0 13 70 5.7 18 0.4 3 252.060... .00 - 87.15 69.728.0 8.0 21 80 7.4 25 0.4 3 252.080... .00 - 103.43 82.7410.0 10.0 22 80 9.2 30 0.4 3 252.100... .00 - 122.33 97.8612.0 12.0 26 90 11.0 36 0.4 3 252.120... .00 - 154.88 123.9016.0 16.0 36 100 15.0 42 0.4 3 252.160... - .10 - 233.63 186.90 20.0 20.0 41 120 19.0 52 0.4 3 252.200... - .10 - 373.28 298.62

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix ZrN Aktionspreis | Prix promotionnel h9 h6 No d’article 6.0 6.0 10 63 5.5 24 0.3 3 253.060.00 87.15 69.72 8.0 8.0 12 72 7.5 29 0.4 3 253.080.00 110.78 88.62 10.0 10.0 14 83 9.5 35 0.5 3 253.100.00 140.70 112.56 12.0 12.0 16 100 11.4 50 0.6 3 253.120.00 180.08 144.06 16.0 16.0 20 115 15.2 63 0.8 3 253.160.00 266.18 212.94 20.0 20.0 20 125 19.0 70 1.0 3 253.200.00 366.45 293.16 25.0 25.0 25 135 23.75 75 1.25 3 253.250.00 528.68 422.94 20% RABATT 20% RABATT

247... VHM - Schaftfräser mit Innenkühlung

Fraises à queue cylindrique carbure monobloc avec arrosage interne

VHM - Vor- und Rückwärtsentgrater 90°

Fraises à chanfreiner carbure monobloc avant et arrière

53 PREALPINA SUISSE GmbH – 2023

DC DCON APMX OAL DN LU CHW ZEFP Artikel-Nr. | Preis | Prix HA - ZrN Preis | Prix HB - ZrN h9 h6 No d’article 6.0 6.0 13 57 5.8 18 0.2 3 247.060... .00 .10 58.28 46.62 59.33 47.46 6.0 6.0 13 80 5.8 42 0.2 3 247.061... .00 .10 74.55 59.64 75.60 60.48 8.0 8.0 21 63 7.8 25 0.2 3 247.080... .00 .10 75.60 60.48 76.65 61.32 8.0 8.0 21 100 7.8 62 0.2 3 247.081... .00 .10 102.38 81.90 103.43 82.74 10.0 10.0 22 72 9.7 30 0.2 3 247.100... .00 .10 107.10 85.68 108.68 86.94 10.0 10.0 22 100 9.7 58 0.2 3 247.101... .00 .10 149.10 119.28 150.15 120.12 12.0 12.0 26 83 11.7 36 0.2 3 247.120... .00 .10 149.10 119.28 150.15 120.12 12.0 12.0 26 120 11.7 73 0.2 3 247.121... .00 .10 203.70 162.96 204.75 163.80 16.0 16.0 36 92 15.7 42 0.2 3 247.160... .00 .10 266.18 212.94 268.28 214.62 16.0 16.0 36 150 15.7 100 0.2 3 247.161... .00 .10 453.08 362.46 455.18 364.14 18.0 18.0 36 92 17.6 42 0.2 3 247.180... .00 .10 301.35 241.08 302.93 242.34 18.0 18.0 36 150 17.6 100 0.2 3 247.181... .00 .10 417.38 333.90 419.48 335.58 20.0 20.0 41 104 19.5 52 0.2 3 247.200... .00 .10 382.20 305.76 384.83 307.86 20.0 20.0 41 150 19.5 98 0.2 3 247.201... .00 .10 583.28 466.62 585.90 468.72 25.0 25.0 50 121 24.5 65 0.3 3 247.250... .00 .10 580.13 464.10 585.38 468.30 20% RABATT

900...

DCX DCON DC APMX OAL DN LU ZEFP Artikel-Nr. | Preis | Prix TIALN Aktionspreis | Prix promotionnel h6 No d’article 2.0 6.0 - 1.4 100 1.2 10 3 900.020.00 56.70 45.36 3.0 6.0 - 2.0 100 2.0 10 4 900.030.00 56.70 45.36 4.0 6.0 - 3.0 100 2.0 13 4 900.040.00 56.70 45.36 6.0 6.0 - 4.0 100 4.0 19 4 900.060.00 62.48 49.98 8.0 6.0 3.6 3.2 100 - - 4 900.080.00 80.33 64.26 10.0 6.0 5.4 4.3 100 - - 4 900.100.00 98.18 78.54 12.0 6.0 7.0 5.0 100 - - 4 900.120.00 117.60 94.08 16.0 10.0 6.0 8.0 100 - - 4 900.160.00 166.95 133.56 90° 20% RABATT

760... VHM - Entgrater 60°

Fraises à chanfreiner carbure monobloc

790... VHM - Entgrater 90°

Fraises à chanfreiner carbure monobloc

54 PREALPINA SUISSE GmbH – 2023

DC DCON OAL ZEFP Artikel-Nr. | Preis | Prix blank | non-revêtu Preis | Prix TIALN h6 No d’article 4.0 4.0 54 4 760.040... .09 .00 20.48 16.38 24.15 19.32 6.0 6.0 57 4 760.060... .09 .00 24.15 19.32 29.40 23.52 8.0 8.0 63 5 760.080... .09 .00 29.40 23.52 38.85 31.08 10.0 10.0 72 6 760.100... .09 .00 34.13 27.30 44.10 35.28 12.0 12.0 83 6 760.120... .09 .00 49.88 39.90 65.63 52.50 16.0 16.0 92 6 760.160... .09 .00 90.30 72.24 111.83 89.46 20.0 20.0 104 6 760.200... .09 .00 163.80 131.04 169.58 135.66

DC DCON OAL ZEFP Artikel-Nr. | Preis | Prix blank | non-revêtu Preis | Prix TIALN h6 No d’article 1.0 3.0 38 3 790.010... .09 .00 19.43 15.54 22.58 18.06 2.0 3.0 38 3 790.020... .09 .00 19.43 15.54 22.58 18.06 3.0 3.0 38 4 790.030... .09 .00 19.43 15.54 22.58 18.06 4.0 4.0 54 4 790.040... .09 .00 20.48 16.38 24.15 19.32 6.0 6.0 57 4 790.060... .09 .00 24.15 19.32 29.40 23.52 8.0 8.0 63 5 790.080... .09 .00 29.40 23.52 38.85 31.08 10.0 10.0 72 6 790.100... .09 .00 34.13 27.30 44.10 35.28 12.0 12.0 83 6 790.120... .09 .00 49.88 39.90 65.63 52.50 16.0 16.0 92 6 790.160... .09 .00 90.30 72.24 111.83 89.46 20.0 20.0 104 6 790.200... .09 .00 163.80 131.04 169.58 135.66 20% RABATT 20% RABATT

PRHSC4SG INOX

PRHSC4SG INOX kurz

55 PREALPINA SUISSE GmbH – 2023

Artikel-Nr./ DC APMX DCON LU OAL ZEFP Preis Aktionspreis No d’article Prix Prix d’action PRHSC4SG-04.0 INOX 4.0 11 6.0 - 57 3 47.50 38.00 PRHSC4SG-05.0 INOX 5.0 13 6.0 - 57 4 47.50 38.00 PRHSC4SG-06.0 INOX 6.0 18 6.0 - 57 4 49.00 39.20 PRHSC4SG-07.0 INOX 7.0 18 8.0 - 63 4 66.00 52.80 PRHSC4SG-08.0 INOX 8.0 24 8.0 - 63 4 66.00 52.80 PRHSC4SG-08.0 INOX Ap 27 8.0 20 8.0 27.0 63 4 66.00 52.80 PRHSC4SG-09.0 INOX 9.0 20 10.0 - 72 4 83.50 66.80 PRHSC4SG-10.0 INOX 10.0 22 10.0 30.0 72 4 83.50 66.80 PRHSC4SG-12.0 INOX 12.0 25 12.0 36.0 83 4 108.00 86.40 PRHSC4SG-14.0 INOX 4 14.0 32 14.0 36.0 83 4 184.50 147.60 PRHSC4SG-14.0 INOX 14.0 32 14.0 36.0 85 5 184.50 147.60 PRHSC4SG-16.0 INOX 4 16.0 32 16.0 43.0 92 4 184.50 147.60 PRHSC4SG-16.0 INOX 16.0 32 16.0 43.0 92 5 184.50 147.60 PRHSC4SG-18.0 INOX 18.0 32 18.0 43.0 94 6 282.00 225.60 PRHSC4SG-20.0 INOX 4 20.0 38 20.0 53.0 104 4 286.00 228.80 PRHSC4SG-20.0 INOX 20.0 38 20.0 53.0 104 6 286.00 228.80 Artikel-Nr./ DC APMX DCON LU OAL ZEFP Preis Aktionspreis No d’article Prix Prix d’action PRHSC4SG-06.0 INOX kurz 6.0 7 6 17 54 4 45.00 36.00 PRHSC4SG-08.0 INOX kurz 8.0 9 8 21 58 4 62.00 49.60 PRHSC4SG-10.0 INOX kurz 10.0 14 10 25 66 4 79.00 63.20 PRHSC4SG-12.0 INOX kurz 12.0 16 12 27 73 4 102.00 81.60 PRHSC4SG-16.0 INOX kurz 16.0 22 16 35 82 5 178.00 142.40 PRHSC4SG-20.0 INOX kurz 20.0 26 20 41 92 6 269.00 215.20 20% RABATT 20% RABATT

CR-AA – Aluminium-Schaftfräser 40° 3-Schneiden mit Eckradius

CR-AA – Fraises toriques carbure monobloc pour aluminium

▪ unbeschichtet / non-revêtu

56 PREALPINA SUISSE GmbH – 2023

Artikel-Nr./ d1 r ℓ1 L D Z Preis Aktionspreis No d’article Prix Prix d’action CR-AA030020 TB 3.0 0.2 8 50 6 3 83.00 49.80 CR-AA030030 TB 0.3 50 6 3 83.00 49.80 CR-AA030050 TB 0.5 50 6 3 83.00 49.80 CR-AA040020 TB 4.0 0.2 11 50 6 3 84.00 50.40 CR-AA040030 TB 0.3 50 6 3 84.00 50.40 CR-AA040050 TB 0.5 50 6 3 84.00 50.40 CR-AA040100 TB 1.0 50 6 3 84.00 50.40 CR-AA050020 TB 5.0 0.2 13 50 6 3 93.00 55.80 CR-AA050050 TB 0.5 50 6 3 93.00 55.80 CR-AA050100 TB 1.0 50 6 3 93.00 55.80 CR-AA060020 TB 6.0 0.2 50 6 3 93.00 55.80 CR-AA060030 TB 0.3 50 6 3 93.00 55.80 CR-AA060050 TB 0.5 50 6 3 93.00 55.80 CR-AA060100 TB 1.0 50 6 3 93.00 55.80 CR-AA080025 TB 8.0 0.25 19 75 8 3 111.00 66.60 CR-AA080030 TB 0.3 75 8 3 111.00 66.60 CR-AA080050 TB 0.5 75 8 3 111.00 66.60 CR-AA080075 TB 0.75 75 8 3 111.00 66.60 CR-AA080100 TB 1.0 75 8 3 111.00 66.60 CR-AA080120 TB 1.2 75 8 3 111.00 66.60 CR-AA080150 TB 1.5 75 8 3 111.00 66.60 CR-AA080200 TB 2.0 75 8 3 111.00 66.60 CR-AA100025 TB 10.0 0.25 22 75 10 3 150.00 90.00 CR-AA100030 TB 0.3 75 10 3 150.00 90.00 CR-AA100040 TB 0.4 75 10 3 150.00 90.00 CR-AA100050 TB 0.5 75 10 3 150.00 90.00 CR-AA100075 TB 0.75 75 10 3 150.00 90.00 CR-AA100080 TB 0.8 75 10 3 150.00 90.00 CR-AA100100 TB 1.0 75 10 3 150.00 90.00 CR-AA100120 TB 1.2 75 10 3 150.00 90.00 CR-AA100150 TB 1.5 75 10 3 150.00 90.00 CR-AA100200 TB 2.0 75 10 3 150.00 90.00 CR-AA100250 TB 2.5 75 10 3 150.00 90.00 CR-AA100300 TB 3.0 75 10 3 150.00 90.00 CR-AA120050 TB 12.0 0.5 26 75 12 3 182.00 109.20 CR-AA120100 TB 1.0 75 12 3 182.00 109.20 CR-AA120150 TB 1.5 75 12 3 182.00 109.20 CR-AA120200 TB 2.0 75 12 3 182.00 109.20 CR-AA120300 TB 3.0 75 12 3 182.00 109.20 CR-AA160100 TB 16.0 1.0 32 100 16 3 303.00 181.80 CR-AA160150 TB 1.5 100 16 3 303.00 181.80 CR-AA160200 TB 2.0 100 16 3 303.00 181.80 CR-AA160300 TB 3.0 100 16 3 303.00 181.80 CR-AA200100 TB 20.0 1.0 38 105 20 3 432.00 259.20 CR-AA200150 TB 1.5 105 20 3 432.00 259.20 CR-AA200200 TB 2.0 105 20 3 432.00 259.20 CR-AA200300 TB 3.0 105 20 3 432.00 259.20 40% RABATT

AUSVERKAUF - nur solange der Vorrat reicht!

Set AD 35°- 38° TIALN

Set BD 42°- 45° TIALN

4 Schneiden, bis 50 HRC

30% AKTION

AKTION

30%

* Solange der Vorrat reicht! / Jusqu’à épuisement du stock!

Ihr Preis

Votre

6 mm VP 176,- CHF Ihr Preis / Votre prix 99,- CHF*

8 mm VP 259,- CHF Ihr Preis / Votre prix 139,- CHF* Ø 10 mm VP 331,- CHF Ihr Preis / Votre prix 159,- CHF*

12 mm VP 458,- CHF Ihr Preis / Votre prix 199,- CHF* VP 218,- CHF Ihr Preis / Votre prix 152,- CHF VP 208,- CHF Ihr Preis / Votre prix 145,- CHF

Lames, jusqu‘à 50 HRC VP 380,- CHF

prix 169,- CHF Ø

KERAMIK ENTGRATBÜRSTEN & SCHLEIFSTIFTE

VHM BOHRSTANGEN-SET

SET E SCLCR/L06

Inhalt / Contenu:

1× E08K SCLCR/L 06

1× E10K SCLCR/L 06

1× E12M SCLCR/L 06

Aktionspreis Prix promotionnel

339 CHF

SET E SDUCR/L07

Inhalt / Contenu:

1× E10K SDUCR/L 07

1× E12K SDUCR/L 07

Aktionspreis Prix promotionnel

239 CHF

KERAMIK ENTGRATBÜRSTEN & SCHLEIFSTIFTE

Wirtschaftliches Bearbeiten von Oberflächen und Querbohrungen mit Hochleistungskeramik

PRODUKTGRUPPE: Entgratwerkzeuge

Dezember 2021

15% Rabatt auf das gesamte Programm!

Wirtschaftliches Bearbeiten von Oberflächen und Querbohrungen mit Hochleistungskeramik

15% Rabais sur tout le programme!

Dezember

PRODUKTGRUPPE: Entgratwerkzeuge

58 PREALPINA SUISSE GmbH – 2023

2021