Nakanishi - E3000 by Prealpina Suisse GmbH

E3000 SERIES

Index Spindle（Modular type） NR-3060S

p.9

NR-453E

p.9

NR-403E

p.9

Straight spindle 60,000min-1 short type Straight spindle 50,000min-1 Straight spindle 40,000min-1

RAX-271E / RAX-71E

Angle spindle Standard angle head

p.11

p.13

p.19

NRR3060-QC

p.21

ARG-011E

p.23

ARG-021E

p.23

RG-3004M

p.23

NR-3080S

p.25

NRAF-5080

p.25

Reduction gear（1:16）

p.13

NR50-5100 ATC

p.15

NR50-5100 ATC-RS

p.15

Automatic tool change spindle Open/close by air cylinder

NR3060-AQC

Reduction gear（1:4）

RA-271E

Automatic tool change spindle Open/close by air cylinder

p.17

Lever quick change spindle Clamp/unclamp by lever operation

RAS-151E

Angle spindle With small head

NRR-3060

Air quick change spindle Clamp/unclamp by air operation

p.11

Angle spindle With long head

p.17

Manual tool change spindle Open/close by lever operation

RA-151E

Angle spindle With short head

NR40-5100 ATC

Automatic tool change spindle Open/close by air cylinder

Oil mist type reduction gear（1:4）

Straight spindle 80,000min-1

Air bearing spindle 80,000min-1

Motor（Modular type） EM-3060

p.27

EM-3060J

p.27

EM-3030T

p.29

EM-3030T-J

p.29

EM-3080J

p.29

60,000min-1 motor

60,000min-1 motor with joint type motor cord

30,000min-1 torque motor

30,000min-1 torque motor with joint type motor cord

Controller

Selector Up to 4 motors to control with connedting selector to controller

E3000 CONTROLLER

Controller

p.3

p.41

E3000 SELECTOR

Selector

p.42

Motor Spindle（One-piece type） EMS-3060K Straight motor spindle

p.33

EMS-3060A

Straight motor spindle ø30・CHA collet・30cm joint cord

p.33

EMR-3008K Straight motor spindle

p.33

EMA-3020K Angle motor spindle

p.35

EMA-3020S

p.35

ø30・CHK collet・30cm joint cord

Motor spindle with reduction gear

Standard angle head

Angle motor spindle

Built-in angle head

EM30-S6000 Straight motor spindle

p.37

EM25-S6000 Straight motor spindle

p.37

EM20-S6000 Straight motor spindle

p.37

EMSF-3060K Straight motor spindle

p.39

ø30・CHK collet

ø25・CHA collet

ø20・CHA collet

With flange

Motor cord 1. Straight type

2. Angle type

3. Joint type

【 Feature 】Connection at the body end

【 Feature 】Connection at the body end into 90 °degree

【 Feature 】Connection possible out of the machine

【 Length 】4m 、6m 、8m

【 Length 】4m / 6m / 8m

【 Length 】3m / 4m / 6m / 8m 【 Connector 】IP68

34.9

17.7

EMCD-3000

Straight type motor cord

p.27

EMCD-3000A

p.27

Angle type motor cord

EMCD-3000J Joint type motor cord

p.28

Accessories

GR-30 Grip Ring

p.43 AL-C1204 Air line kit

p.43 AL-A1205 Air line kit

CHA / CHB / CHK / CHR / CHR RS / CHS / CHSS / CH8 Collet

p.43 AL-M1201BL Air line kit

p.44

p.43 AL-A0611 Air line kit

QC3-K / QC3-K-R / QC3-A / QC3-A-R Collet holder

p.43

p.45 p.4

E3000 SERIES

System Chart E3000 Modular type ∅30/∅25/∅20㎜ Collet / Arbor kit

Spindle

60,000min

50,000min

-1

40,000min

-1

（NR-453E）

（NR-403E）

60,000min-1 short type p.9

NR-453E /NR-403E 50,000min-1/40,000min-1 p.9

7,490 min

20,000min

-1

5,000min

-1

（RAX-71E）

7,490 min

With short head p.11

13,330 min

RA-271E

NR50-5100 ATC

Automatic tool change spindle p.15

NR50-5100 ATC-RS

Automatic tool change spindle p.15

50,000 min

-1

NR40-5100 ATC

Automatic tool change spindle p.17

Collet CHB Group ø2.0〜4.0 ㎜

60,000 min

-1

NRR-3060

Manual tool change spindle p.17

4M /6M /8M＊ Angle type motor cord p.27

-1

E3000

Selector ※ Can be connected when operating motors individually *Not simultaneously p.42

EM-3060

60,000min-1 motor p.27

1,000～30,000min

＊ Mounting example of

-1

angle spindle

EM-3030T

30,000min-1 motor p.29

1,000～30,000min

E3000

-1

Controller p.41

30,000min-1 motor With joint type motor cord p.29

1,000～60,000min

3M 4M 6M 8M

EMCD-3000J-

3M /4M /6M /8M Joint type motor cord p.28

-1

AL-C1204 Air line kit

※ To supply clean and dry

EM-3060J/EM-3060J-2M

cooling and purging air to Controller and Motor/Spindle. p.43

60,000min-1 motor With joint type motor cord p.27

15,000min

-1

at the cutting tool

Oil mist type reduction gear（1:4） p.23

AL-A1205 Air line kit

Usable only for NR-3060S, NR-453E/NR-403E

（for NRAF-5080）

p.43

-1

Collet CHA Group ø0.5〜4.0 ㎜

NRR3060-QC

Lever quick change spindle p.21

Collet nut K-265

60,000 min

-1

AL-M1201BL

NR3060-AQC

Air line kit

Air quick change spindle p.19

80,000 min

（for RG-3004M）

p.43

-1

NR-3080S

Collet CHA Group ø0.5〜4.0 ㎜

p.5

EMCD-3000A-

RG-3004M

60,000 min

Collet,arbor kit Refer to Accessories

4M /6M /8M Straight type motor cord

-1

Collet CHR RS Group ø3.175〜6.35 ㎜

Collet CHK Group ø0.5〜6.35 ㎜

EMCD-3000-

Reduction gear（1:16） p.23

EM-3030T-J/EM-3030T-J-2M

-1

Collet CHR Group ø2.0〜6.35 ㎜

50,000 min

-1

With small head p.13

50,000 min

Collet nut K-265

at the cutting tool

-1

Collet CHS Group ø0.8〜3.175 ㎜

Collet nut CHN-A

-1

1,000～60,000min

（RAX-271E）

RA-151E

Collet CHK Group ø0.5〜6.35 ㎜

ARG-011E

Reduction gear（1:4） p.23

With long head p.13

Standard angle head p.11

Collet nut CHN-A

at the cutting tool

ARG-021E

RAX-271E /RAX-71E

Special arbor for metal saw KCH-02

-1

RAS-151E

Collet CH8 Group ø0.8〜3.175 ㎜

7,500min

Collet CHK Group ø0.5〜6.35 ㎜

Grinding arbor AGM-03

Usable only for NR-3060S, NR-453E/NR-403E

1,870min

Collet nut K-265

Special arbor for metal saw KCH-03

Controller

-1

NR-3060S

Grindstone flange EGF-19

Motor Cord

Motor

20,000～80,000min

-1

80,000min-1 p.25

80,000 min

EM-3080J/EM-3080J-2M

-1

NRAF-5080

Air bearing spindle p.25

Brushless motor With joint type motor cord p.29

3M 4M 6M 8M

EMCD-3000J-

3M /4M /6M /8M Joint type motor cord p.28

AL-A0611 Air line kit

（for NRAF-5080）

p.43

Air compressor

One-piece type ∅30/∅25/∅20㎜ Collet / Arbor kit

Motor spindle

Motor Cord

Controller

Collet nut K-265 Collet CHK Group ø0.5〜6.35 ㎜

Special arbor for metal saw KCH-03

60,000min

-1

EMS-3060K

ø30・CHK collet・30cm joint cord p.33

Grinding arbor AGM-03

Grindstone flange EGF-19 Collet nut CHN-A

60,000min

-1

Collet CHA Group ø0.5〜4.0 ㎜

EMS-3060A

ø30・CHA collet・30cm joint cord p.33

Collet nut K-265

E3000 Selector

Collet CHK Group ø0.5〜6.35 ㎜

※ Can be connected when

8,000min

-1

Special arbor for metal saw KCH-03

EMR-3008K

Motor spindle with reduction gear p.33

Grinding arbor AGM-03

3M 4M 6M 8M

operating motors individually *Not simultaneously p.42

EMCD-3000J-

3M /4M /6M /8M Joint type motor cord p.28

Collet nut K-265 Collet CHK Group ø0.5〜6.35 ㎜

21,300min

-1

Special arbor for metal saw KCH-03 Grinding arbor AGM-03

EMA-3020K

Standard angle head p.35

21,300min

-1

Collet CHSS Group ø1.0〜3.175 ㎜

EMA-3020S

E3000

Built-in angle head p.35

Controller p.41

Collet nut K-265

60,000min

-1

Collet CHK Group ø0.5〜6.35 ㎜

EMSF-3060K With flange p.39

Collet nut K-265 Collet CHK Group ø0.5〜6.35 ㎜ Special arbor for metal saw KCH-03

AL-C1204

60,000min

Air line kit

※ To supply clean and dry

-1

cooling and purging air to Controller and Motor/Spindle. p.43

EM30-S6000 ø30・CHK collet p.37

Grinding arbor AGM-03

4M 6M 8M

Grindstone flange EGF-19

60,000min

-1

EM25-S6000

Collet nut CHN-A Collet CHA Group ø0.5〜4.0 ㎜

ø25・CHA collet p.37

60,000min

Air compressor

EMCD-3000-

-1

4M /6M /8M Straight type motor cord

EMCD-3000A-

4M /6M /8M＊ Angle type motor cord p.27

EM20-S6000 Collet,arbor kit Refer to Accessories

ø20・CHA collet p.37

＊ Mounting example of angle spindle

p.6

E3000 SERIES

Spindle（Modular type）

Spindle

30 30 30 30 30 30 30

p.7

Motor

Motor Cord

NR-3060S

p.9

NR-453E

p.9

NR-403E

p.9

RAX-271E / RAX-71E

p.11

RA-151E

p.11

RAS-151E

p.13

RA-271E

p.13

Controller

Shown In Actual Size

50 50 40

26.8 30 30 30 30 30 30 48

NR50-5100 ATC

p.15

NR50-5100 ATC-RS

p.15

NR40-5100 ATC

p.17

NRR-3060

p.17

NR3060-AQC

p.19

NRR3060-QC

p.21

ARG-011E

p.23

ARG-021E

p.23

RG-3004M

p.23

NR-3080S

p.25

NRAF-5080

p.25

30 30 30 30 30

EM-3060

p.27

EM-3060J

p.27

EM-3030T

p.29

EM-3030T-J

p.29

EM-3080J

p.29

p.8

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

NR-3060S

NR-403E

NR-453E

p.29

E3000 SERIES

p.27

p.29

Shown In Actual Size

Spindle（Modular type） NR-3060S

DXF-data

60,000min short type -1

30 O.D.∅30 ㎜

∅15.9

∅30 - 00.01

50 Tool mounting depth

33.9 Recommended clamping area

17.4

53.9

NR-453E

DXF-data

50,000min -1

30 O.D.∅30 ㎜

∅15.9

∅30 - 00.01

50 Tool mounting depth

55 Recommended clamping area 100

17.4

NR-403E

DXF-data

40,000min -1

30 O.D.∅30 ㎜

∅15.9

∅30 - 00.01

50 Tool mounting depth

20 17.4

p.9

55 Recommended clamping area 100

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

p.27

Specifications

EMCD-3000A p.27

E3000 CONTROLLER p.41

DXF DXF files are available data on our website

NR-3060S

Max. rpm

ø30㎜

60,000min

Spindle runout -1

Within μm

p.42

Order by Code No.

Code No.

O.D.

E3000 SELECTOR

1583

Model

NR-3060S

Collet

Weight

CHK Group

260g

（ø 0.5 〜 ø 6.35 ㎜）

Standard Accessories Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）/ Spanner（12×14）: 2pcs・（22×27）: 1pc

Collet（CHK group）: ø0.5～ø6.35㎜ p.44 Options

Special arbor for metal saw（KCH-03）: for O.D.ø30 ㎜ and under / Grinding arbor（AGM-03）: for grindstone I.D.ø5㎜ Grindstone flange（EGF-19）: applicable grindstone I.D.ø19.05×O.D.ø40×7㎜

NR-453E

Code No.

O.D.

Max. rpm

ø30㎜

50,000min

Spindle runout -1

Within μm

1566

Model

NR-453E

Collet

Weight

CHK Group

440g

（ø 0.5 〜 ø 6.35 ㎜）

Standard Accessories Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）/ Spanner（12×14）: 2pcs・（22×27）: 1pc

Collet（CHK group）: ø0.5～ø6.35㎜ p.44 Options

NR-403E

Code No.

O.D.

Max. rpm

ø30㎜

40,000min

Spindle runout -1

Within μm

1565

Model

NR-403E

Collet

Weight

CHK Group

440g

（ø 0.5 〜 ø 6.35 ㎜）

Standard Accessories Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）/ Spanner（12×14）: 2pcs・（22×27）: 1pc

Collet（CHK group）: ø0.5～ø6.35㎜ p.44 Options

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

RAX-271E / RAX-71E

CHK / CH8 p.44

RA-151E

p.29

E3000 SERIES

p.27

p.29

Shown In Actual Size

Spindle（Modular type） RAX-271E / RAX-71E

DXF-data

Standard angle head

30 O.D.∅30 ㎜

∅30

Grease point

17.4

49.9 Tool mounting depth

∅30 - 00.01

35 Recommended clamping area

82 ∅15.9

RA-151E

DXF-data

With short head

O.D.∅30 ㎜

∅22.8

∅30 - 00.01 20 8.2

32 Tool mounting depth

40.1

37.5 Recommended clamping area

∅9

p.11

86.6

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

p.27

Specifications

E3000 CONTROLLER

EMCD-3000A p.27

E3000 SELECTOR

p.41

p.42

DXF DXF files are available data on our website

RAX-271E / RAX-71E

Order by Code No.

Code No.

1578

Model

RAX-271E

Code No.

1579

Model

RAX-71E

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

RAX-271E

ø30㎜

20,000min

1 1.5

30,000min

Spindle runout

Collet

Weight

（ø 0.5 〜 ø 6.35 ㎜）

CHK Group

580g

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

RAX-71E

ø30㎜

5,000min

1 6

30,000min

Spindle runout

Collet

Weight

CHK Group

580g

[Model]

Within μm

[Model]

Within μm

（ø 0.5 〜 ø 6.35 ㎜）

-1

Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265） Standard Accessories Spanner（12×14）: 2pcs・（22×27）: 1pc / Grease for reduction gear（10ml）/ Grease Dispenser : 1pc

Grease nipple : 1pc Collet（CHK group）: ø0.5～ø6.35㎜ p.44 Options

Special arbor for metal saw（KCH-03）: for O.D.ø30 ㎜ and under Grindstone arbor（AGM-03）: for grindstone I.D.ø5.0 ㎜

Put grease ever y 70 to 100 hours to extend the life of the reduction gear. Grease-up prevents friction of the internal gears and degradation of the existing grease in the reducer.

RA-151E

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

7,490min

1 2.67

20,000min

-1

1505

Model

RA-151E

Collet

Weight

CH8 Group

385g

（ø 0.8 〜 ø3.175 ㎜）

Standard Accessories Collet : ø3.0 ㎜（CH8-3.0）/ Spanner（7×5.5）・（8×5）・（22×27）: 1pc each Options

Collet（CH8 group）: ø0.8～ø3.175㎜ p.44 Special arbor for metal saw（KCH-02）: for O.D.ø30 ㎜ and under p.12

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

CHK / CHS

RA-271E

RAS-151E

p.44

p.29

E3000 SERIES

p.27

p.29

Shown In Actual Size

Spindle（Modular type） RAS-151E

DXF-data

With long head

20.2 16.9

50 Tool mounting depth

Recommended clamping area

∅30- 00.01

O.D.∅30 ㎜

52.3 ∅15.9 ∅23 - 00.01

RA-271E

DXF-data

With small head

32.7 Recommended clamping area

∅7.9

45 73.7

p.13

30 O.D.∅30 ㎜

∅30 - 00.01

28.5 6.5

30.8 Tool mounting depth

∅17.4

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

Specifications

E3000 CONTROLLER

EMCD-3000A

p.27

p.41

DXF DXF files are available data on our website

RAS-151E

E3000 SELECTOR p.42

Order by Code No.

Code No.

1559

Model

RAS-151E

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

7,490min

1 2.67

20,000min

Spindle runout

Collet

Weight

CHK Group

413g

Within μm Standard Accessories

-1

（ø 0.5 〜 ø 6.35 ㎜）

-1

Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265） Spanner（12×14）: 2pcs・（22×27）: 1pc Collet（CHK group）: ø0.5～ø6.35㎜ p.44

Options

Special arbor for metal saw（KCH-03）: for O.D.ø30 ㎜ and under Grinding arbor（AGM-03）: for grindstone I.D.ø5.0 ㎜

RA-271E

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

13,330min

1 1.5

20,000min

-1

1506

Model

RA-271E

Collet

Weight

CHS Group

240g

（ø 0.8 〜 ø3.175 ㎜）

Standard Accessories Collet : ø3.0 ㎜（CHS-3.0）/ Spanner（7×5.1）・（8×5）・（22×27）: 1pc each Options

Collet（CHS group）: ø0.8～ø3.175㎜ p.44 p.14

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

CHR / CHR RS

NR50-5100 ATC

p.44

NR50-5100 ATC-RS

p.27

p.29

E3000 SERIES

p.29

Shown In Actual Size

Spindle（Modular type） NR50-5100 ATC Automatic tool change spindle

12.5 26.4 Tool mounting depth

（when tool diameter ∅4.0～6.0㎜）

∅50 - 00.01

50 O.D.∅50 ㎜

70 Recommended clamping area DXF-data

∅36

∅15.8

54 Tool mounting depth 9.6

（when tool diameter ∅3.175㎜ and under）

NR50-5100 ATC-RS

Automatic tool change spindle

O.D.∅50 ㎜

This spindle is recommended for the customers who use a big amount of cutting fluid. "RS" DXF-data

stands for "Rubber Seal". This Rubber Seals added in the collet prevent coolant from going into the collet. In addition, the dust-proof cover which is bigger than NR50-5100 ATC prevents coolant from going into the spindle bearing. 12.5 26.4 Tool mounting depth （when tool diameter ∅4.0～6.0㎜）

∅50 - 00.01

70 Recommended clamping area

∅36 ∅13.6

4.3 54 Tool mounting depth 9.5

p.15

（when tool diameter ∅3.175㎜ and under）

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

p.27

Specifications

p.27

Max. rpm

ø50㎜

50,000min

Options

-1

Air pressure of collet open/clese

Spindle runout

0.55〜0.6MPa

Within μm

Model

NR50-5100 ATC

Collet

Weight

CHR Group

1,370g

（ø3.175 ㎜）

Air hose with filter（K-251）: ø6㎜×2m Collet（CHR group）: ø2.0, ø3.0, ø3.175, ø4.0, ø6.0, ø6.35㎜ p.44

Code No.

O.D.

Max. rpm

ø50㎜

50,000min

Options

1580

Collet : ø3.175㎜（CHR-3.175）/ Spanner（9×11）・（12×14）: 1pc each / Bar wrench（K-236）: 1pc

NR50-5100 ATC-RS

Standard Accessories

p.42

Order by Code No.

Code No.

O.D.

E3000 SELECTOR

p.41

DXF DXF files are available data on our website

NR50-5100 ATC

Standard Accessories

E3000 CONTROLLER

EMCD-3000A

-1

Air pressure of collet open/clese

Spindle runout

0.55〜0.6MPa

Within μm

7690

Model

NR50-5100 ATC-RS

Collet

Weight

CHR RS Group

1,370g

（ø3.175 ㎜）

Collet : ø3.175㎜（CHR-3.175RS）/ Spanner（9×11）・（12×14）: 1pc each / Bar wrench（K-236）: 1pc Air hose with filter（K-251）: ø6㎜×2m Collet（CHR RS group）: ø3.0, ø3.175, ø4.0, ø6.0, ø6.35㎜ p.44 p.16

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

CHB

NR40-5100 ATC

p.44

NRR-3060

p.27

p.29

E3000 SERIES

p.29

Shown In Actual Size

Spindle（Modular type） NR40-5100 ATC Automatic tool change spindle

DXF-data

30 Tool mounting depth 15

O.D.∅40 ㎜

55 Recommended clamping area

∅40 - 00.01 ∅24 ∅10.8

80 6.1

NRR-3060

26.8

DXF-data

Manual tool change spindle

O.D.∅26.8 ㎜

∅A

∅4.05

M2×0.4

∅30

∅29.8

∅26.8 - 00.01

27.1 Tool mounting depth

30 33.6 Recommended clamping area

∅6.9 5.5

p.17

79.4

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

p.27

Specifications

p.27

Max. rpm

ø40㎜

50,000min

Options

-1

1582

Air pressure of collet open/clese

Spindle runout

0.55〜0.6MPa

Within μm

Model

NR40-5100 ATC

Collet

Weight

CHB Group

740g

（ø3.175 ㎜）

Collet : ø3.175㎜（CHB-3.175）/ Spanner（6.1×8）・（9×11）: 1pc each / Bar wrench（K-236）: 1pc Air hose with filter（K-251）: ø6㎜×2m Collet（CHB group）: ø2.0, ø3.0, ø3.175, ø4.0 p.44

NRR-3060

1836

Code No.

O.D.

Max. rpm

ø26.8㎜

60,000min

Recommended clamping area

p.42

Order by Code No.

Code No.

O.D.

E3000 SELECTOR

p.41

DXF DXF files are available data on our website

NR40-5100 ATC

Standard Accessories

E3000 CONTROLLER

EMCD-3000A

Spindle runout -1

Within μm

Model

NRR-3060

Collet

Weight

CHB Group

350g

（ø3.175 ㎜）

Standard Accessories Collet : ø3.175㎜（CHB-3.175）/ Spanner（6.1×8）: 2pcs・（22×27）: 1pc Options

Collet（CHB group）: ø2.0, ø3.0, ø3.175, ø4.0 p.44 p.18

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

CHK / CHA

NR3060-AQC

QC3-A / QC3-A-R / QC3-K / QC3-K-R

p.44

p.45

p.27

p.29

E3000 SERIES

p.29

Shown In Actual Size

Spindle（Modular type） NR3060-AQC Air quick change spindle ● Quick and easy collet holder change with air chucking mechanism

DXF-data

QC3-K

QC3-A

30 O.D.∅30 ㎜

● Enhancing productivity by enabling external tool set-up. ● 2 types of collet holders are available.（ CHK 0.5mm 〜 6.35mm, CHA 0.5mm 〜 4.0mm） 45°

4-M5×0.8 depth5.5

ø ø48

4 90°

∅4

22.5

4-M4×0.7 depth7

Outside view

2.9

59.8

24.3

∅59

∅30

∅15.9

∅18.8

∅30 - 0 01 .

Outside view

104.8

Outside view of the tip of the spindle

When mounting

Tool mounting depth

p.19

Dust cover area ∅15.4

（Collet holder for collet CHA） 0.5 （2.9）（24.3）

When mounting

Tool mounting depth

Dust cover area

∅11.8

QC3-A

∅15.9

∅30

QC3-K

（Collet holder for collet CHK）

∅18.8

QC3-K

0.5 （2.9）（20.1）

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

Specifications

E3000 CONTROLLER

EMCD-3000A

p.27

Order by Code No.

Code No.

Max. rpm

ø30㎜ 60,000min

Air pressure of collet open/clese

Spindle runout

0.6MPa

Within μm

-1

p.42

DXF DXF files are available data on our website

NR3060-AQC O.D.

E3000 SELECTOR

p.41

9220

Model

NR3060-AQC

Collet holders

Weight

QC3-A / QC3-A-R（for Collet CHA） g QC3-K / QC3-K-R（for Collet CHK） 1,230

Standard Accessories Spanner（22×27）: 1pc / ø6㎜ Air hose with filter : 1pc

Parts（ Optional ） Collet holder

Collet

Spanner

（Collet nut included）

You can choose the I.D. size

QC3-K/A

QC3-K/A-R

The following is an example of ø3.0 ㎜ .

*QC3-K-R/QC3-A-R cannot be used to Preset adapter.

DXF-data

QC3-K

CHK

DXF-data QC3-K-R

C o d e N o.

I.D. ø0.5 ㎜~6.35 ㎜

DXF-data

QC3-A

CHA

CHK- 3 . 0

Model

p.44

915 3 0

（I.D. ø3.0 ㎜）

9210

9223

2026

QC3-K

QC3-K-R

Spanner 12 × 14（2pcs.）

9209

9222

（for Collet CHK）（for Collet CHK）

DXF-data

QC3-A-R

C o d e N o.

I.D. ø0.5 ㎜~4.0 ㎜

CHA- 3 . 0

Model

p.44

914 3 0

（I.D. ø3.0 ㎜）

QC3-A

2012

2054

QC3-A-R Spanner 8 × 5 Spanner 9 × 11

（for Collet CHA）（for Collet CHA）

（1pc.）

*In case using a Preset adapter, only 1pc. spanner is used. CHK collet → 12 × 14 spanner（1pc.）/ CHA collet → 9 × 11 spanner（1pc.）.

Preset adapter

Set-up outside machines

In case using a milling holder

（QC3-K/QC3-A）

Preset adapter

Collet holder Height gauge

Milling holder

（Arrangement by yourself）

DXF-data

Collet nut

Setup stand

（Arrangement by yourself）

C o d e N o.

9211

Model

QC3-ADP

Set-up outside machines Convenient adjustment with Single hand type spanner

In case using a vice

Collet holder Collet nut

Preset adapter

3 p.20

Collet & Collet holder

Spindle

Electric motor

Spindle Guide

EM-3060J

EM-3060

EM-3030T-J

EM-3030T

p.27

CHK / CHA QC3-A / QC3-A-R / QC3-K / QC3-K-R p.44

NRR3060-QC

p.45

p.27

p.29

E3000 SERIES

p.29

Shown In Actual Size

Spindle（Modular type） NRR3060-QC

Lever quick change spindle

O.D.∅30 ㎜

● Quick and easy collet holder change with lever chucking mechanism ● Enhancing productivity by enabling external tool set-up.

DXF-data

● 2 types of collet holders are available.（ CHK 0.5mm 〜 6.35mm, CHA 0.5mm 〜 4.0mm）

QC3-K 14.8

DXF-data

58.9

QC3-A

∅30

∅15.9

∅18.8

∅30 - 00.01

2.9

55.2

24.3

29.6

∅38

35.2 Recommended clamping area

104.8

Outside view of the tip of the spindle Dust cover area

Dust cover area

Tool mounting depth

p.21

（Collet holder for collet CHA）

When mounting

0.5 （2.9）（24.3）

Tool mounting depth

∅11.8

∅15.4

When mounting

QC3-A

∅15.9

∅30

QC3-K

（Collet holder for collet CHK）

∅18.8

QC3-K

0.5 （2.9）（20.1）

Controller

Motor cord

3M 4M 6M 8M

EMCD-3000J

EMCD-3000

p.28

Specifications

E3000 CONTROLLER

EMCD-3000A

p.27

Order by Code No.

Code No.

Max. rpm

ø30㎜

60,000min

Recommended clamping area

Spindle runout -1

p.42

DXF DXF files are available data on our website

NRR3060-QC O.D.

E3000 SELECTOR

p.41

Within μm

9208

Collet holders

Model

NRR3060-QC

Lever operating angle

QC3-A / QC3-A-R（for Collet CHA） QC3-K / QC3-K-R（for Collet CHK）

90°

Weight

570g

Standard Accessories Spanner（22×27）: 1pc

Parts（ Optional ） Collet holder

Collet

Spanner

（Collet nut included）

You can choose the I.D. size

QC3-K/A

QC3-K/A-R

The following is an example of ø3.0 ㎜ .

*QC3-K-R/QC3-A-R cannot be used to Preset adapter.

DXF-data QC3-K

CHK

DXF-data QC3-K-R

C o d e N o.

I.D. ø0.5 ㎜~6.35 ㎜

DXF-data

QC3-A

CHA

CHK- 3 . 0

Model

p.44

（I.D. ø3.0 ㎜）

DXF-data QC3-A-R

C o d e N o.

I.D. ø0.5 ㎜~4.0 ㎜

914 3 0 CHA- 3 . 0

Model

p.44

915 3 0

（I.D. ø3.0 ㎜）

9210

9223

2026

QC3-K

QC3-K-R

Spanner 12 × 14（2pcs.）

9209

9222

（for Collet CHK）（for Collet CHK）

QC3-A

2012

2054

QC3-A-R Spanner 8 × 5 Spanner 9 × 11

（for Collet CHA）（for Collet CHA）

（1pc.）

*In case using a Preset adapter, only 1pc. spanner is used. CHK collet → 12 × 14 spanner（1pc.）/ CHA collet → 9 × 11 spanner（1pc.）.

Preset adapter

Set-up outside machines

In case using a milling holder

（QC3-K/QC3-A）

Preset adapter

Collet holder Height gauge

Milling holder

（Arrangement by yourself）

DXF-data

Collet nut

Setup stand

（Arrangement by yourself）

C o d e N o.

9211

Model

QC3-ADP

Set-up outside machines Convenient adjustment with Single hand type spanner

In case using a vice

Collet holder Collet nut

Preset adapter

3 p.22

E3000 SERIES

Shown In Actual Size

Reduction gear（Modular type） ARG-011E

DXF-data

Reduction gear（1:4）

∅30 -- 0.01 0.02

O.D.∅30 ㎜

Grease point

ARG-021E

DXF-data

Reduction gear（1:16）

∅30 -- 0.01 0.02

O.D.∅30 ㎜

Grease point

RG-3004M

Oil mist type reduction gear（1:4）

DXF-data

30 O.D.∅30 ㎜

● Max input speed 60,000min-1（standard type 30,000min-1） ● Longer product life by oil mist lubrication ● No greasing is necessary ● Oil mist supply is necessary

∅30 -- 0.01 0.02

※ Not recommended for dry machining.

p.23

Specifications

DXF DXF files are available data on our website

ARG-011E

Order by Code No.

1507

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

7,500min

1 4

30,000min

-1

ARG-011E

Model

Weight

242g

-1

Standard Accessories Grease for reduction gear（10ml）/ Grease nipple : 1pc

Put grease ever y 70 to 100 hours to extend the life of the reduction gear. Grease-up prevents friction of the internal gears and degradation of the existing grease in the reducer.

ARG-021E

1508

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

1,870min

1 16

30,000min

-1

ARG-021E

Model

Weight

325g

-1

Standard Accessories Grease for reduction gear（10ml）/ Grease nipple : 1pc

Put grease ever y 70 to 100 hours to extend the life of the reduction gear. Grease-up prevents friction of the internal gears and degradation of the existing grease in the reducer.

RG-3004M

Spindle

7348

Code No.

Reduction gear

Electric motor

Motor cord

Model

RG-3004M

Controller For oil mist lubrication

For dry cooling air supply

Spindle

RG-3004M

EM-3060J p.27

EMCD-3000J p.28

p.43

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

15,000min

1 4

60,000min

-1

E3000 CONTROLLER

AL-M1201BL

p.41

AL-C1204 p.43

Weight -1

240g p.24

Collet & Collet holder

Spindle

Spindle Guide CHN-A / K-265A p.45

CHK / CHA

NRAF-5080

NR-3080S

p.44

E3000 SERIES

Shown In Actual Size

Spindle（Modular type） NR-3080S

DXF-data

80,000min -1

30 O.D.∅30 ㎜

∅11.8

∅30 - 00.01

31.3 Tool mounting depth

3.7

28.3 Recommended clamping area

14.7

NRAF-5080

DXF-data

Air bearing spindle

48 O.D.∅48 ㎜

21.8

∅48

PCD 57

∅65

16.9

82.3 99.2

p.25

15.5

Electric motor

Controller

Motor cord

3M 4M 6M 8M

EM-3080J

E3000 CONTROLLER

EMCD-3000J

p.29

p.28

Specifications

ø30㎜

80,000min

Standard Accessories Options

Spindle runout -1

Within μm

Collet

Weight

CHA Group

170g

（ø 0.5 〜 ø4.0 ㎜）

1783

Model

NR-3080S

1782

Model

NRAF-5080

Collet : ø3.0 ㎜（CHA-3.0）/ Collet nut（CHN-A） Spanner（22×27）: 1pc ・（8×5）: 1pc ・（9×11）: 1pc Collet（CHA group）: ø0.5 ～ ø4.0 ㎜ p.44

NRAF-5080

O.D.

Order by Code No.

Code No.

Max. rpm

Code No.

Max. rpm

ø48㎜ 80,000min

-1

Appropriate bearing air pressure

Spindle runout

35NI/min

Within μm

（0.5MPa）

Collet

Weight

CHK Group

560g

（ø 0.5 〜 ø 6.35 ㎜）

Cross section

Body mounting : flange mounting, M3 bolt（8 locations, equidistribution, 45°angle, PCD57）

8-∅3.5 through hole 8-∅6.5 head depth 3.5

Bearing type : air static bearing / bearing load capacity : radial 20N, thrust 40N

2 2 .5°

Useable Max. diameter of grindstone : ø8.0 ㎜ and under on ø6.0 ㎜ shank

Specifications

p.42

DXF DXF files are available data on our website

NR-3080S

O.D.

E3000 SELECTOR

p.41

Collet : ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265A）

2 2 .5°

Hose diameter : ø4㎜ , for bearing air inlet

Standard Accessories Spanner（12×14）: 2pcs ・（22×27）: 1pc / Fitting（KQ2H04-M5-X2）: 1pc

Plug（KQ2P-04）: 1pc, Inlet air hose（ø4㎜×4m）: 1pc, Bar wrench（K-236）: 1pc Options

Collet（CHK group）: ø0.5 ～ ø6.35㎜ p.44 p.26

E3000 SERIES

Shown In Actual Size

Motor / Motor Cord EM-3060

DXF-data

Mortor Cord Straight Type

Motor Cord Angle Type

30 O.D.∅30 ㎜

∅30 -- 0.02 0.03

60,000min -1 motor

93.5

EM-3060J

DXF-data

60,000min -1 motor with joint type motor cord

∅30 -- 0.02 0.03

O.D.∅30 ㎜

96.6

Cord length L=0.3m

Motor cord 34.9

Code No.

4M 6M 8M

Straight type 17.7

4M 6M 8M

Angle type

p.27

Model

Length

1748

EMCD-3000-4M

1749

EMCD-3000-6M

1750

EMCD-3000-8M

1744

EMCD-3000A-4M

1743

EMCD-3000A-6M

1742

EMCD-3000A-8M

Standard Accessories

Compatible model

Air hose Connector cap （Included）

EM-3060 EM30-S6000 EM25-S6000 EM20-S6000

Air hose Connector cap （Included）

EM-3060 EM30-S6000 EM25-S6000 EM20-S6000

Specifications

DXF DXF files are available data on our website

Order by Code No.

EM-3060

Code No.

1597

Torque & power curve

Torque（cN・m）

34.9

17.7

EM-3060

Model

Power（W） 450

400

350

300

250

200

150

100

Straight type

Angle type

O.D.

Speed Range

Max. power

1,000 〜 60,000min

ø30㎜

Weight

350W

-1

325g

Standard Accessories Spanner（22×27）: 1pc

Torque

EM-3060J

Power

Continuous Duty Area

Length

0.3m

Code No.

1765

Model

EM-3060J

Length

Code No.

1779

Model

EM-3060J-2M

Torque & power curve

Torque（cN・m）

Power（W） 450

3M 4M 6M 8M

※ Joint Type motor cord is necessary.

O.D.

Speed Range

Max. power

1,000 〜 60,000min

ø30㎜

350W

-1

Weight

360g

（Motor cord is not included.）

400

350

300

250

200

150

100

50 0

3M 4M 6M 8M Joint type motor cord

rpm（×10 3min -1）

Standard Accessories Spanner（22×27）: 1pc

Motor cord

rpm（×10 3min -1）

Torque

Code No.

Model

Length

1778

EMCD-3000J-3M

3.0m

1768

EMCD-3000J-4M

3.7m

1767

EMCD-3000J-6M

5.7m

1766

EMCD-3000J-8M

7.7m

Power

Continuous Duty Area

Standard Accessories

Compatible model

Air hose Connector cap （Included）

EM-3060J・EM-3030T-J EMS-3060K・EMS-3060A EMR-3008K・EMA-3020K EMA-3020S・EM-3080J

p.28

E3000 SERIES

Shown In Actual Size

Motor / Motor Cord EM-3030T

DXF-data

Mortor Cord Straight Type

Motor Cord Angle Type

O.D.∅30 ㎜

30,000min torque motor -1

∅30 -- 00..0023

● EM-3030T torque is twice as big as EM-3060.

89.3

EM-3030T-J 30,000min -1 torque motor with joint type motor cord

DXF-data

30 O.D.∅30 ㎜

∅30 -- 00..0023

● EM-3030T-J torque is twice as big as EM-3060J.

96.6 Cord length L=0.3m

EM-3080J 80,000min -1 brushless motor with joint type motor cord

DXF-data

∅30 -- 00..0023

O.D.∅30 ㎜

97.7

p.29

Specifications

DXF DXF files are available data on our website

Order by Code No.

EM-3030T

Code No.

7360 Torque（cN・m）

34.9

17.7

500

450

400

350

300

250

200

150

100

Angle type

O.D.

Speed Range

1,000 〜 30,000min

Max. power

Weight

350W

-1

340g

Standard Accessories Spanner（22×27）: 1pc

New type

Old type

（Color of air output joint is whiite）

（Color of air output joint is blue）

Controller

EM-3030T-J

ø30㎜

Speed Range

1,000 〜 30,000min

EM-3030T

Torque

Power

EM-3060J

Torque

Power

Code No.

7358

Model

EM-3030T-J

Length

Code No.

7359

Model

EM-3030T-J-2M

Weight

415g

New type

（Color of air output joint is blue）

Controller

EM-3080J

Power（W） 500

450

400

350

300

250

200

150

100

50 0

rpm（×10 min ） 3

-1

EM-3030T-J

Torque

Power

EM-3060J

Torque

Power

Continuous Duty Area

If EM-3030T-J is connected to old type non applicable controller, it will not rotate.

Length

0.3m

Code No.

1781

Model

EM-3080J

Length

Code No.

1788

Model

EM-3080J-2M

Torque（cN・m）

3M 4M 6M 8M

Torque & power curve

（Motor cord is not included.）

Standard Accessories Spanner（22×27）: 1pc

Old type

Continuous Duty Area

0.3m

350W

（Color of air output joint is whiite）

Length

Max. power -1

If EM-3030T is connected to old type non applicable controller, it will not rotate.

※ Joint Type motor cord is necessary.

O.D.

20 rpm（×10 3min -1 ）

Torque（cN・m）

3M 4M 6M 8M

Power（W）

Straight type

ø30㎜

EM-3030T

Model

Torque & power curve

Power（W）

400

350

300

※ Joint Type motor cord is necessary.

O.D.

Speed Range

ø30㎜

20,000 〜 80,000min

Standard Accessories Spanner（22×27）: 1pc

250

-1

Max. power

Weight

350W

360g

（Motor cord is not included.）

200

150

100

1 0

rpm（×10 min ） 3

Torque

Power

-1

Continuous Duty Area

p.30

E3000 SERIES

Motor spindle（One-piece type）

Motor spindle

Motor Cord

Controller

30 30 30

EMS-3060K

p.33

EMS-3060A

p.33

EMR-3008K

p.33

30 30 30 p.31

EMA-3020K

p.35

EMA-3020S

p.35

EMSF-3060K

p.39

Shown In Actual Size

EM30-S6000

p.37

EM25-S6000

p.37

EM20-S6000

p.37

p.32

Motor Spindle（One-piece type）

Spindle Guide EMS-3060K

EMS-3060A

EMR-3008K

E3000 SERIES

Shown In Actual Size

Motor spindle（One-piece type） EMS-3060K

DXF-data

ø30・CHK collet・30cm joint cord

∅30

O.D.∅30 ㎜

46.4 Tool mounting depth

0 - 0.01

∅15.9

45 Recommended clamping area

16.9

136.3

164.2 Cord length L=0.3m

EMS-3060A

DXF-data

ø30・CHA collet・30cm joint cord

∅30 - 00.01

30 O.D.∅30 ㎜

31.4 Tool mounting depth

∅11.8

14.7

45 Recommended clamping area

123.7

149.4

Cord length L=0.3m

EMR-3008K

DXF-data

Motor spindle with reduction gear

30 O.D.∅30 ㎜

46.4 Tool mounting depth ∅30 - 00.01

77.1

Grease point

∅15.9

16.9

45 Recommended clamping area

155.6

183.5

p.33

Cord length L=0.3m

Motor cord

Controller

3M 4M 6M 8M

E3000 CONTROLLER

EMCD-3000J p.28

Specifications

Order by Code No.

Code No.

Max. rpm

Spindle runout

ø30㎜ 60,000min Standard Accessories

-1

Within μm

Collet

Max. power

Weight

CHK Group

350W

565g

（ø 0.5 〜 ø 6.35 ㎜）

1756

EMS-3060K

Model

3M 6M

4M 8M

※ Joint Type motor cord is necessary.

Torque & power curve

Torque（cN・m）

Power（W） 450

Collet：ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）

400

Spanner（12×14）：2pcs

350

300

Collet（CHK Group）：ø0.5 ～ ø6.35㎜ p.44

250

200

150

100

Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766） Special arbor for metal saw（KCH-03）: for O.D. ø30 ㎜ and under

Options

p.42

DXF DXF files are available data on our website

EMS-3060K

O.D.

E3000 SELECTOR

p.41

Grinding arbor（AGM-03）: for grindstone I.D. ø5.0 ㎜

Code No.

rpm（×10 3min -1）

Grindstone flange（EGF-19）: for grindstone I.D. ø19.05×O.D. ø40×7㎜

EMS-3060A

10 Torque

1755

Power

Continuous Duty Area

EMS-3060A

Model

4M 8M

3M 6M

※ Joint Type motor cord is necessary. Torque（cN・m）

O.D.

Max. rpm

Spindle runout

Max. power

Weight

Power（W） 450

400

350

300

250

Collet：ø3.0 ㎜（CHA-3.0）/ Collet nut（CHN-A）

200

150

Spanner（8×5）・（9×11）：1pc each

100

ø30㎜ 60,000min Standard Accessories

Collet

Torque & power curve

-1

Within μm

CHA Group

（ø 0.5 〜 ø4.0 ㎜）

350W

495g

Collet（CHA Group）：ø0.5 ～ ø4.0 ㎜ p.44

Options

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

8,000min

1 4

32,000min

Spindle runout

Collet

Max. power

1757

Power

Continuous Duty Area

EMR-3008K

Model

3M 6M

4M 8M

※ Joint Type motor cord is necessary. Torque（cN・m）

Torque & power curve

Power（W） 350

300

250

Collet：ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）

200

Spanner（12×14） : 2pcs / Grease for reduction gear（10ml）/ Grease nipple : 1pc

150

100

CHK

Group （ø 0.5 〜 ø 6.35 ㎜）

350W

650g

Collet（CHK Group）：ø0.5 ～ ø6.35㎜ p.44 Options

Torque

-1

Weight

Within μm Standard Accessories

-1

rpm（×10 3min -1）

Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766）

EMR-3008K

Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766） Special arbor for metal saw（KCH-03）: for O.D. ø30㎜ and under / Grinding arbor（AGM-03）: for grindstone I.D. ø5㎜

rpm（×10 3min -1） Torque

Power

Put grease every 70 to 100 hours to extend the life of the reduction gear. Grease-up prevents friction of the internal gears and degradation of the existing grease in the reducer.

Continuous Duty Area

p.34

Motor Spindle（One-piece type）

Spindle Guide EMA-3020K

EMA-3020S

E3000 SERIES

Shown In Actual Size

Motor spindle（One-piece type） EMA-3020K

DXF-data

Standard angle head

O.D.∅30 ㎜

∅30 - 00.01

50 Tool mounting depth

45 Recommended clamping area

17.4

76.2

58.8

27.8

Grease point

141.4

∅15.9 ∅30

167.4 Cord length L=0.3m

EMA-3020S

DXF-data

Built-in angle head

∅30 - 00.01

31 Tool mounting depth

45 Recommended clamping area

6.5

36.5

O.D.∅30 ㎜

∅7.9 13

133.6

157.6

p.35

Cord length L=0.3m

Motor cord

Controller

3M 4M 6M 8M

E3000 CONTROLLER

EMCD-3000J p.28

Specifications

Order by Code No.

Code No.

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

21,300min

1 1.5

32,000min

Spindle runout

Collet

Max. power

Weight

CHK Group

280W

760g

Standard Accessories

-1

（ø 0.5 〜 ø 6.35 ㎜）

1759

EMA-3020K

Model

3M 4M 6M 8M

-1

※ Joint Type motor cord is necessary.

Torque & power curve

Torque（cN・m）

Collet：ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265） Spanner（12×14）：2pcs / Grease for reduction gear（10ml）/ Grease nipple : 1pc Collet（CHK Group）：ø0.5 ～ ø6.35㎜ p.44

Options

p.42

DXF DXF files are available data on our website

EMA-3020K

Within μm

E3000 SELECTOR

p.41

Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766）

Power（W）

350

300

250

200

150

100

Special arbor for metal saw（KCH-03）: for O.D. ø30 ㎜ and under

0 20 21.3

rpm（×10 3min -1）

Grinding arbor（AGM-03）: for grindstone I.D. ø5.0 ㎜

Torque

Power

Continuous Duty Area

Put grease ever y 70 to 100 hours to extend the life of the reduction gear. Grease-up prevents friction of the internal gears and degradation of the existing grease in the reducer.

EMA-3020S

Code No.

1758

EMA-3020S

Model

3M 4M 6M 8M

O.D.

Max. speed at the cutting tool

Reduction ratio

Max. rpm

ø30㎜

21,300min

1 1.5

32,000min

Max. power

Weight

Spindle runout

Within μm

-1

Collet

CHSS Group

（ø1.0 〜 ø3.175 ㎜）

275W

※ Joint Type motor cord is necessary.

605g

Standard Accessories Collet：ø3.0 ㎜（CHSS-3.0）/ Spanner（7×5.1）・（8×6.1）：1pc each Options

Torque & power curve

Torque（cN・m） -1

Collet（CHSS Group）：ø1.0 ～ ø3.175㎜ p.44 Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766）

Power（W）

350

300

250

200

150

100

0 20 21.3

rpm（×10 min ） 3

Torque

Power

-1

Continuous Duty Area

p.36

Motor Spindle（One-piece type）

Spindle Guide EM30-S6000

EM25-S6000

EM20-S6000

E3000 SERIES

Shown In Actual Size

Motor spindle（One-piece type） EM30-S6000 ø30・CHK collet

50 Tool mounting depth

DXF-data

Motor Cord Straight type

Motor Cord Angle type

DXF-data

Motor Cord Straight type

Motor Cord Angle type

DXF-data

Motor Cord Straight type

Motor Cord Angle type

30 O.D.∅30 ㎜

∅30 - 00.01 ∅15.9

36 Recommended clamping area

20 17.4

149.5

EM25-S6000 ø25・CHA collet

∅25 - 00.01

41 Tool mounting depth

25 O.D.∅25 ㎜

∅11.8

30 Recommended clamping area

22 14.7

139.5

EM20-S6000 ø20・CHA collet

41 Tool mounting depth ∅20

0 - 0.01

∅11.8

18 14.7

p.37

34 Recommended clamping area 133

20 O.D.∅20 ㎜

Motor cord

Controller

EMCD-3000

E3000 CONTROLLER

EMCD-3000A

p.27

Specifications

Spindle runout

ø30㎜ 60,000min Standard Accessories

Order by Code No.

Code No.

Max. rpm -1

Within μm

Collet

Max. power

Weight

CHK Group

350W

575g

（ø 0.5 〜 ø 6.35 ㎜）

1747

Torque（cN・m）

Collet：ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）

400

Spanner（12×14）：2pcs

350

300

Collet（CHK Group）：ø0.5 ～ ø6.35㎜ p.44

250

200

150

100

Special arbor for metal saw（KCH-03）: for O.D. ø30 ㎜ and under

EM25-S6000

1 0

Code No.

Max. rpm

Spindle runout

Collet

Max. power

Weight

Torque

1746

Power

Continuous Duty Area

EM25-S6000

Model

Torque & power curve

Power（W） 450

400 350

300

250

Collet：ø3.0 ㎜（CHA-3.0）/ Collet nut（CHN-A）

200

150

Spanner（8×5）・（9×11）：1pc each

100

-1

Within μm

CHA Group

250W

（ø 0.5 〜 ø4.0 ㎜）

375g

Collet（CHA Group）：ø0.5 ～ ø4.0 ㎜ p.44

Max. rpm

Spindle runout

Collet

Max. power

Weight

rpm（×10 3min -1）

Motor cord：Length 4m（1748）, 6m（1749）, 8m（1750） *Angle type is also available

Code No.

10 Torque

1745

Power

Model

Torque（cN・m）

Continuous Duty Area

EM20-S6000

Torque & power curve

Power（W） 450

9 8

400

350

300

250

Collet：ø3.0 ㎜（CHA-3.0）/ Collet nut（CHN-A）

200

150

Spanner（8×5）・（9×11）：1pc each

100

ø20㎜ 60,000min

Options

EM20-S6000

Standard Accessories

ø25㎜ 60,000min

O.D.

rpm（×10 3min -1）

Torque（cN・m）

Options

Power（W） 450

Grindstone flange（EGF-19）: for grindstone I.D. ø19.05×O.D. ø40×7㎜

Standard Accessories

Torque & power curve

Grinding arbor（AGM-03）: for grindstone I.D. ø5.0 ㎜

O.D.

EM30-S6000

Model

Motor cord：Length 4m（1748）, 6m（1749）, 8m（1750） *Angle type is also available Options

p.42

DXF DXF files are available data on our website

EM30-S6000

O.D.

E3000 SELECTOR

p.41

-1

Within μm

CHA Group

（ø 0.5 〜 ø4.0 ㎜）

250W

230g

Collet（CHA Group）：ø0.5 ～ ø4.0 ㎜ p.44 Motor cord：Length 4m（1748）, 6m（1749）, 8m（1750） *Angle type is also available

rpm（×10 min ） 3

Torque

Power

-1

Continuous Duty Area

p.38

Motor Spindle（One-piece type）

Spindle Guide EMS-3060K

EMS-3060K+GR-30

EMSF-3060K

E3000 SERIES

Shown In Actual Size

Motor spindle（One-piece type） EMSF-3060K

DXF-data

With flange

30 O.D.∅30 ㎜

● Easy clamping / Unclamping of the spindle, Easy mounting to the machine ● Avoid trouble by excessive tightening ● Mounting spindle at small intervals available

∅15.9

∅30 - 00.01

46.4 Tool mounting depth

50 Do not clamp here

12.5

108.5

16.9

136.3

50.5 Do not clamp here 27.8 11

153.2

Cord length L=0.3m

Nakanishi spindles can be mounted in various ways 3 spindle types are available in E3000 series to meet customer' s demands

p.39

Straight type

Straight type + Grip type Ring

With flange

Mounting devices have to be prepared by user

Type of usage for attachment to straight spindle Grip type Ring available

Type of spindle and mounting device integrated

Motor cord

Controller

3M 4M 6M 8M

E3000 CONTROLLER

EMCD-3000J p.28

Specifications

Order by Code No.

Code No.

Max. rpm

ø30㎜

60,000min

Max. power

Weight

p.42

DXF DXF files are available data on our website

EMSF-3060K

O.D.

E3000 SELECTOR

p.41

Spindle runout

Within μm

-1

7643

Model

EMSF-3060K

3M 4M 6M 8M

Collet

CHK Group

※ Joint Type motor cord is necessary.

（ø 0.5 〜 ø 6.35 ㎜）

Torque（cN・m）

Torque & power curve

Power（W） 450

350W

620g Collet：ø3.0 ㎜（CHK-3.0）/ Collet nut（K-265）

Standard Accessories Spanner（12×14）：2pcs, Air hose 0.3m : 1pc

Lock bolt（M4 hexagon socket head bolt）: 4pcs

350

300

250

200

150

100 50

1 0

insert motor spindle body into the holder

rpm（×10 3min -1）

Motor cord：Length 3m（1778）, 4m（1768）, 6m（1767）, 8m（1766）

How to mount to a machine tool

400

Torque

Power

Continuous Duty Area

in case of EMSF-3060K

tighten the flange with 4 lock bolt

Cross section

（M4）

3 5°

Φ3

Options

Collet（CHK Group）：ø0.5 ～ ø6.35㎜ p.44

Body mounting hole 4-ø4.2 Through hole

p.40

E3000 SERIES

Shown In Actual Size

E3000 Controller 88

E3000 CONTROLLER Controller Plug type

Code No.

100V（A Type）

8421 9775 8422 9776

120V（B Type） 200V（C Type） 230V（D Type） Plug type

Area

100V

Japan

120V

USA Canada

200V

（C C Type Type））（

Without Plug plug

230V

Europe

（A A Type Type））（

（B B Type Type））（

DXF-data

Bottom

Back

238

H 238

（D Type）

Product

W 88

D 138

External Input / Output Control Signal Operation ●External Input

Motor Rotating / Stopped, Error Released, Rotating Direction, Motor Speed Setting and etc.

●External Monitor

Motor Current, Error, Warning, Rotating pulse and etc.

●Parameter Setting

Maximum motor speed setting, Fix the motor speed ※For more information, please refer to the operation manual on our website. ● Equipped with safety relay break and speed point

Speed Range

1,000〜80,000min

-1

Input Voltage

Max. power

AC100〜240V

350W

Power consumption Air consumption

AC1.8A

Nℓ/min （at 0.25〜0.3MPa）

Weight

2.8kg

Standard Accessories

Power cord : 2m / Air hose with filter / Reducer Connector cap（Included） Bracket / Nylon Clip / Screw / Rubber pad Fuse（T6.3AL）250V : 2pcs p.41

E3000 SERIES

Shown In Actual Size

Selector 88

E3000 SELECTOR Selector Plug type

Code No.

100V（A Type）

8425 9781 8426 9782

120V（B Type） 200V（C Type）

H 238

230V（D Type）

W 88

D 138

DXF-data

Bottom

Back

238

DXF-data

Number of motor

pcs Up to 4 motors to control with connedting selector to controller *not simultaneously

Input Voltage

AC100〜240V Power consumption Air consumption

AC0.15A

120

ℓ/min （When connecting 4 motors）

Weight

1.9kg

Standard Accessories

Power cord : 2m / Communication cable : 60cm Selector connecting cord : 60cm Connector cap（Included）/ Plug to avoid air flow Bracket / Nylon Clip / Screw / Rubber pad Fuse（T1.6AL）250V : 2pcs p.42

E3000 SERIES

Accessories GR-30 Grip Ring

Code No.

3-M5×0.8 depth8

DXF-data

1885

GR-30

Model

How to mount to a machine tool ø4

0 12

12 0

（ø 3

reference

∅59.8

hole

Remove the Mounting Bolt

Tighten the Lock Bolt

（4N・m）

Affix them to the machine with Mounting Bolt

（Recommended tightening torque:4N・m）

AL-A1205

Air line kit（ for NRAF-5080） 0.3μm filter

AL-M1201BL

Air line kit（ for RG-3004M ） 0.3μm filter

DXF-data

4504

Code No. Model

Loosen the Lock Bolt

Mounting Bolt（GR-30）M5×25 : 3pcs

Air line kit 0.3μm filter

Tighten the Mounting Bolt to widen the inside diameter

Weight :3 8 5 g

Standard Accessories

AL-C1204

0 +00.02）

Mounting

Insert and position the spindle referring to the Recommended Clamping Area on the spindle

AL-C1204

Code No. Model

Standard Accessories

Hose pipe（K-260）: 2m

4505

Code No.

AL-A1205

Model

Standard Accessories

4501

AL-M1201BL Standard Accessories

Hose pipe（K-260）: 2m

※ Recommendation of nominal filtration rating : 0.3μm, Pressure range : 0.1-1.0MPa Recommendation of air filter : M2000-WS（CKD）

AL-A0611

Air line kit（ for NRAF-5080） 0.01μm filter

E3000-PEX4

Control panel extension cord（ 4m ）

DXF-data

Code No. Code No. Model

p.43

8407

1548 AL-A0611

Model

E3000-PEX4

Compatible model

E3000 Controller

Collet 15.5 3

∅7.4

I.D.

∅1.0～∅4.0

Code No.

Model

91494 91496 91495 91492 91430 91493 91440

CHA-3.0AA

ø3.0AA※

CHA-3.175AA

ø3.175AA※

CHA-4.0AA

ø4.0AA※

CHA-2.35

ø2.35

CHA-3.0

ø3.0

CHA-3.175

ø3.175

CHA-4.0

－

CHA-□□

∅0.5～∅0.9

Collet CHB group

∅10.5

∅1.0 ～ ∅6.35

92820 92830 92893 92840 91597 91598 91599 91600 91601 91592 91530 91593 91540 91560 91596

※ High precision type AA （Spindle runout within 2μm）

ø1.1,ø1.2,ø1.3,ø1.4,ø1.7,ø1.8,ø1.9 ø2.1,ø2.2,ø2.3,ø2.4,ø2.6,ø2.7,ø2.8,ø2.9 ø3.1,ø3.2,ø3.3,ø3.4,ø3.6,ø3.7,ø3.8,ø3.9

CHB-2.0

ø2.0

CHB-3.0

ø3.0

CHB-3.175

ø3.175

CHB-4.0

ø4.0

CHK-3.0AA

ø3.0AA※

CHK-3.175AA

ø3.175AA※

CHK-4.0AA

ø4.0AA※

CHK-6.0AA

ø6.0AA※

CHK-6.35AA

ø6.35AA※

CHK-2.35

ø2.35

CHK-3.0

ø3.0

CHK-3.175

ø3.175

CHK-4.0

ø4.0

CHK-6.0

ø6.0

CHK-6.35

∅10.5

I.D.

EM20-S6000・EM25-S6000 EMS-3060A・NR-3080S

ø1.6

I.D.

Compatible model

ø1.0,ø1.5,ø2.0,ø2.5,ø3.5

Collet CHA Group I.D.

ø4.0 ø0.5,ø0.6,ø0.7,ø0.8,ø0.9

∅7.4

I.D.

ø6.35 ø0.5,ø0.6,ø0.7,ø0.8,ø0.9

NR40-5100 ATC NRR-3060・NRR-2651

EM30-S6000・EMA-3020K EMS-3060K・EMR-3008K NR-151E・NR-3060S NR-403E・NR-453E RAS-151E・RAX-271E RAX-71E・NRAF-5080 ※ High precision type AA （Spindle runout within 2μm）

ø1.0,ø1.5,ø2.0,ø2.5,ø3.5,ø4.5,ø4.76,ø5.5 ∅0.5 ～ ∅0.9

－

CHK-□□

91930 91993 91996 91920 91940 91960 93201 93202 93203 93204 93205 90592 90530 90593 90516

CHR-3.0

Collet CHK Group

ø1.1,ø1.2,ø1.3,ø1.4,ø1.7,ø1.8,ø1.9 ø2.1,ø2.2,ø2.3,ø2.4,ø2.6,ø2.7,ø2.8,ø2.9 ø3.1,ø3.2,ø3.3,ø3.4,ø3.6,ø3.7,ø3.8,ø3.9 ø4.1,ø4.2,ø4.3,ø4.4,ø4.6,ø4.7,ø4.8,ø4.9 ø5.1,ø5.2,ø5.3,ø5.4,ø5.6,ø5.7,ø5.8,ø5.9 ø1.6,ø5.0

I.D.

Collet CHR group I.D.

Collet CHR RS group

I.D.

23.5

ø3.0

CHR-3.175

ø3.175

CHR-6.35

ø6.35

CHR-2.0

ø2.0

CHR-4.0

ø4.0

CHR-6.0

ø6.0

CHR-3.0RS

ø3.0

CHR-3.175RS

ø3.175

CHR-4.0RS

ø4.0

CHR-6.0RS

ø6.0

CHR-6.35RS

ø6.35

CHS-2.35

ø2.35

CHS-3.0

ø3.0

CHS-3.175

ø3.175

CHS-1.6

ø1.6

NR50-5100 ATC

NR50-5100 ATC RS

※Also available for NR50-5100 ATC

RA-271E

ø0.8,ø0.9 CHS-□□

ø1.0,ø2.0,ø2.5

93092 93030 93093

CHSS-2.35

ø2.35

CHSS-3.0

ø3.0

CHSS-3.175

ø3.175

－

CHSS-□□

ø1.0,ø1.5,ø2.0,ø2.5

CH8-2.35

ø2.35

CH8-3.0

ø3.0

－ Collet CHS group 23.5

∅7.4

I.D.

Collet CHSS group

I.D.

34.4

91092 91030 91093

CH8-3.175

ø1.1,ø1.2,ø1.3,ø1.4,ø1.5,ø1.7,ø1.8,ø1.9 ø2.1,ø2.2,ø2.3,ø2.4,ø2.6,ø2.7,ø2.8,ø2.9

ø3.175 ø0.8,ø0.9

－ Collet CH8 group

CH8-□□

EMA-3020S

RA-151E

ø1.0,ø1.5,ø2.0,ø2.5 ø1.1,ø1.2,ø1.3,ø1.4,ø1.6,ø1.7,ø1.8,ø1.9 ø2.1,ø2.2,ø2.3,ø2.4,ø2.6,ø2.7,ø2.8,ø2.9

p.44

E3000 SERIES

Accessories Collet nut

Code No.

Model

Description

Compatible model

CHN-A

Collet nut for CHA collet

EM20-S6000・EM25-S6000 EMS-3060A・NR-3080S

∅15.9

2102

2129

K-265

Collet nut for CHK collet

EM30-S6000・EMA-3020K EMS-3060K・EMR-3008K NR-151E・NR-3060S NR-403E・NR-453E RAS-151E RAX-271E・RAX-71E

∅15.2

∅11. 8

11.5

2158

K-265A

Collet nut for NRAF-5080

NRAF-5080

12.5

Special arbor・Grinding arbor 50

d 54.5

Code No.

Model KCH-02（5.0）

ø5.0（I.D.）

KCH-02（6.0）

ø6.0（I.D.）

KCH-02（8.0）

ø8.0（I.D.）

KCH-03（5.0）

ø5.0（I.D.）

KCH-03（6.0）

ø6.0（I.D.）

KCH-03（8.0）

ø8.0（I.D.）

2131

AGM-03

Grinding arbor Spindle runout : within 0.02mm for grindstone I.D. ø5.0mm

EMA-3020K・EMS-3060K EMR-3008K NR-3060S・RAS-151E RAX-71E・RAX-271E

2138

EGF-19

Grindstone flange Available grindstone dimension ø19.05（I.D.）x ø40（O.D.）mmx7（width）mm

EMS-3060K・NR-3060S NR-403E・NR-453E

∅5

∅29

∅19.05

Collet holder ∅18.8

43.8

∅15.4

39.6

Preset adapter

13.8

∅29.8

Bush

p.45

Compatible model

2146 1077 2147 2148 2130 2149

Grease for reduction gear

I.D. / Description / Specifications Special arbor for metal saw ød（I.D.）x ø30mm（O.D.）and under Spindle runout : within 0.02mm

RA-151E

Special arbor for metal saw ød（I.D.）x ø30mm（O.D.）and under Spindle runout : within 0.02mm

EMA-3020K・EMS-3060K EMR-3008K NR-3060S・RAS-151E RAX-71E・RAX-271E

Code No.

Model

1547 1550

－

Grease for reduction gear（2.5ml）

－

Grease for reduction gear（10ml）

1549

－

Grease for reduction gear（100ml）

Code No.

Model

9210

QC3-K

DXF-data

9223

QC3-K-R

DXF-data

9209

QC3-A

9222

QC3-A-R

Cod e No.

9211 Code No.

DXF-data DXF-data

Description

DXF-data

Model

ARG-011E・ARG-021E EMA-3020K RAX-271E・RAX-71E

Description

Compatible model

Collet holder for CHK

NR3060-AQC NRR3060-QC

Collet holder for CHA

NR3060-AQC NRR3060-QC

※ With K-265（Collet nut）

※ With CHN-A（Collet nut）

Model QC3-ADP

Compatible model

Description Preset adapter

Description × I.D. × O.D.

Compatible model QC3-K QC3-A

Compatible model

1877

RB-20×22

ø22 Bush Dimensions : ø20×ø22×40mm

EM20-S6000

1876

RB-20×22.8

ø22.8 Bush Dimensions : ø20×ø22.8×40mm

EM20-S6000

1875

RB-20×23

ø23 Bush Dimensions : ø20×ø23×40mm

EM20-S6000

1878

RB-20×25

ø25 Bush Dimensions : ø20×ø25×40mm

EM20-S6000

1879

RB-20×25.4

ø25.4 Bush Dimensions : ø20×ø25.4×40mm

EM20-S6000

1880

RB-30×32

ø32 Bush Dimensions : ø30×ø32×45mm

NR-3060S・NR-453E NR-403E

1881

RB-30×36

ø36 Bush Dimensions : ø30×ø36×45mm

NR-3060S・NR-453E NR-403E

NAKANISHI Solutions

LINE UP

Electric Motors & Spindles

Spindle

Controller

Motor

Brushless Motors & Spindles Application for CNC lathes / Special purpose machines

Application for machining centers and milling machines

E4000 SERIES

E3000 SERIES

1,000〜40,000min

1,000〜80,000min

-1

Electric spindle

［ ø40 ㎜］

Max.1,200W

■ World's highest power in this class ■ Max. power: 1,200W, Max. torque: 1.0N・m

-1

［ ø30/25/20 ㎜］

HES SERIES

Max.350W

■ The largest product lines for various processing ■ Space-saving solution for small CNC lathe

Max.80,000min -1

［ For small diameter endmills and drills only ］

［ HES810 ］ ■ The most cost effective solution to add high-speed

machining capability

E2000

SERIES

1,000〜50,000min

-1

［ ø22.8/25 ㎜］

Max. 200W

■ 80,000min -1,6.0cN・m ■ BT,NT,HSK A63,ST shanks are available ■ Driven by E3000 Controller

SERIES

1,000〜80,000min

-1

［ ø19.05/20/22/25 ㎜］

Max.150W

［ HES510 ］ ■ Small size spindle allows multi-axis

installation in limited space

■ 50,000min -1,8.75cN・m ■ BT,NT,CAT,IT,HSK A,ST shanks are available ■ Driven by E3000 Controller

■ Super short motor spindle ■ High efficiency brushless motor

Air Motors & Spindles

Spindle

Application for CNC lathes / Special purpose machines

AM SERIES

One-piece type

1,000〜60,000min

［ ø30/25/20 ㎜］

-1

Max.350W

AM SERIES

Air compressor

Application for machining centers and milling machines

SMS SERIES

Modular type

5,000〜30,000min

［ ø22.8 ㎜］

Air line kit

Motor

-1

Max.125W

40,000min

-1

［ For small diameter endmills and drills only ］

Air spindle

■ Separate motor and spindle for flexible application ■ Short body enables the spindle to mount in a limited space

on a small NC/CNC lathe or on a special purpose machine

changes spindles

Air Turbine Spindles

Application for CNC lathes / Special purpose machines SERIES Max.160,000 min -1 ［ ø65/40 ㎜］

Air line kit

Air compressor

Application for machining centers and milling machines

PLANET SERIES

HTS SERIES

Max.65,000min -1

150,000min

-1

［ For small diameter endmills and drills only ］

■ No thermal expansion on Z axis thanks to air turbine

■ Extreme accuracy・Runout 1μm ■ For high precision small diameter drilling,

internal grinding of ceramics ■ Long life of spindle thanks to contactless rotation mechanism

■ Ceramic bearings for higher rigidity and precision ■ Straight and BT,NT shanks are available

■ Adjustable to various application through changing

generating little heat

■ A milling machine turns into a jig grinder ■ For high precision internal grinding

■ Ultra high speed 150,000min -1 with higher rigidity

thanks to ceramic bearings

■ BT,HSK E and straight（M2040） shanks are available

Prealpina Suisse GmbH Ringstrasse 18 | CH-5432 Neuenhof Tel.: +41 56 416 01 80 info@prealpina-suisse.ch www.prealpina-suisse.ch