Nakanishi - Micro Grinders by Prealpina Suisse GmbH

Prealpina Suisse GmbH Ein Unternehmen der Swiss Tool Tranig Holding AG Ringstrasse 18 CH - 5432 Neuenhof Fon +41 (56) 416 01 80 Fax +41 (56) 416 01 81 www.prealpina-suisse.ch info@prealpina-suisse.ch GmbH − Gesellschaft mit beschränkter Haftung Geschäftsführer: Marco Grüter Gerichtsstand CH − 5400 Baden HR Kt. AG CH − 400.4.022.359-1

Headquarters・Factory 700 Shimohinata, Kanuma, Tochigi 322-8666, Japan TEL：+81-289-64-3520／FAX：+81-289-62-1135 ※Specifications and design are subject to change without notice.

www.nakanishi-inc.com PR-K376E Ver.1 2022-06-14 05. Y

1110

6\Y WYVK\J[ SPULZ [V TLL[ `V\Y ULLKZ :PUJL P[Z LZ[HISPZOTLU[ PU 5(2(50:/0 Z WOPSVZVWO` VM THU\MHJ[\YPUN OHZ ILLU [V WYV]PKL WYVK\J[Z [OH[ HYL YVI\Z[ LSLNHU[ `L[ YLHZVUHIS` WYPJLK ¹ 0U 5(2(50:/0 LU[LYLK [OL NLULYHS PUK\Z[YPHS MPLSK I` HWWS`PUN [OL OPNO ZWLLK YV[HY` [LJOUVSVN` J\S[P]H[LK PU [OL KLU[HS MPLSK 5(2(50:/0 Z MPYZ[ WYVK\J[ ^HZ H OHUK VWLYH[LK WYLJPZPVU 4PJYV .YPUKLY 4PJYV .YPUKLYZ HYL \ZLK PU H ^PKL ]HYPL[` VM PUK\Z[YPLZ [OH[ YLX\PYL WYLJPZPVU HUK HJJ\YHJ` PU [OLPY ^VYR >L Z\WWVY[ [OL THU\MHJ[\YPUN VM WYVK\J[Z [OH[ WYV]PKL JVU]LUPLUJL HUK HMMS\LUJL [V WLVWSL Z KH` [V KH` SP]LZ /LHKX\HY[LYZ

/LHKX\HY[LYZ! *LU[LY *V\Y[

-HJ[VY` (

,SLJ[YPJ :`Z[LT 7YVK\J[Z $WWDFKPHQW 7\SH %UXVKOHVV 0LFUR *ULQGHU

,TH_ ,=6S\[PVU

S 〜

,_JS\ZP]L ;VVSZ :`TIVSZ \ZLK PU 5(2(50:/0 ,_JS\ZP]L ;VVSZ

(PY :`Z[LT 7YVK\J[Z

CAUTION

Electric System

,ZWLY[

CAUTION

Electric System

$WWDFKPHQW 7\SH +LJK 7RUTXH %UXVKOHVV 0LFUR *ULQGHU

S 〜

.LULYHS 7HY[Z・7YV[LJ[P]L ,X\PWTLU[Z S 〜

;VVSZ MVY :OLLU\Z A,96

3HQFLO 7\SH $LU *ULQGHU

047<3:,

S 〜

:OLLU\Z A,96

A-1

S 〜

Exclusive Tools

:VUPJ *\[[LY A,96

Exclusive Tools

8OWDUDVRQLF &XWWHU

S 〜

;VVSZ MVY -05, ),3; :(5+,9

General Parts

8OWUDVRQLF 3ROLVKHU

4050 (5.3, ;@7,

General Parts

<S[YHZVUPJ :`Z[LT 7YVK\J[Z

;VVSZ MVY (5.3, ;@7,

Ultrasonic

79,:;6

〜

;VVSZ MVY 4050 3<:;,9 :>05. 3<:;,9

Ultrasonic

8OWUD +LJK 6SHHG $LU 7XUELQH *ULQGHU

S 〜

Air System

96;<:

;VVSZ MVY 3<:;,9

Air System

$WWDFKPHQW 7\SH 0LFUR $LU *ULQGHU

A-2

Precautions for using NAKANISHI Products For safe usage ● Please read operation manuals before using any NAKANISHI product. ● Please keep the operation manuals on hand so that the user can refer to them at any time.

！

Caution

Incorrect use of the product, or ignoring ‘CAUTIONS for safety’ described in the operating manuals may cause fatal or serious bodily injury.

Do not apply high pressure or pry to the tools. This can break and/or bend the tools. Use the tools within their design limitation. Excessive pressure will decrease the efficiency of your work and cause excessive wear of the tools.

Do not use damaged or broken electric cords and air hoses.

Check the tools carefully CAUTION before use. Confirm that the tools are free of chips, cracks, splits, scratches, lack of bonding, deformation, etc.

CAUTIONS CAUTION

Always use safety glasses, masks, face guards for your safety.

CAUTION

Spray

Only use attachments, parts, consumable articles and a c c e s s o r i e s p ro d u c e d b y NAKANISHI INC.

ス

OIL プス OIL スレプス OIL IL プー O レ

プレーレーー

13mm

油油油油

Decrease the speed as shown in the table below, if you are using a longer overhang than 10 mm.

Overhang

Maximum allowable speed (min-1)

Shown in the catalogue (A) (A) x 0.5

Less than 25 mm

(A) x 0.3

Less than 50 mm

(A) x 0.1

Exclusive Tools

Less than 10 mm Less than 20 mm

General Parts

10mm

The tools should be used by taking care of the overhang and below maximum allowable speed. The catalogue shows the maximum allowable speed at 10 mm overhang (distance between the face of the collet and the top of the tool shank).

Exclusive Tools

Perform an inspection before use. Clean the inside of the collet and tool shank, chips or fine metals inside the collet could cause tool slippage and result in damage to machinery or0 rpm bodily injury.

0 rpm 0 rpm

General Parts

Do not leave the work area with the hand tools still in operation. Confirm that the hand tools F haveOOFFcompletely stopped after F FF OF F O switching them off.

0 rpm 0 rpm

Ultrasonic

Store the tools and hand tools in a cool and dry place.

CAUTION

Air System

Stop grinding or polishing immediately whenever unusual sounds, vibrations, or wear are found. Restart the work only after the problem is solved.

Ultrasonic

OFF OFF F OFF O F

油

Fix the work material firmly in a vise and/or other clamping fixture.

Start at low speed and gradually increase to insure safe work. This is particularly important for the use of13 new mm tools, large 13mm elastic tools cutting tools and such as rubber grindstone, 0 rpm sander and brush tools.

Air System

ス

OIL スプ OIL プス油 ILIL レ OO レープ油

ーレー

A-3

13mm 13mm 0 rpm

Do not operate the products where flammable liquids or gases exist.

13mm

Do not wear loose clothing and/or accessories that may be caught in machinery. Long hair should be tied prior to machine operation.

Electric System

Do not touch the tools and hand tools when in operation. Make sure the work area is neat and there is sufficient light.

Select proper hand tools and for your application. Select tools carefully considering the performance of the hand tools, work procedure and type / shape of the material.

Electric System

Fasten the chuck firmly. Make sure the tool is intact in the chuck to avoid tool slippage.

A-4

Electric System Products INDEX CAUTION

CAUTION

Series Examples of Applications ..................................................... p.1-6 Controllers ............................................................................. p.1-7 Brushless Motors .................................................................. p.1-8

Electric System

Standard Sets ........................................................................ p.1-5

System Chart ................................................................... p.1-9~10 Micro Grinders ............................................................... p.1-11~12

-1

Pencil Type Reciprocating Polishing Finisher .............. p.1-15~16 Fine Belt Sander .................................................................. p.1-17 Pistol Type Polisher ............................................................. p.1-18

Air System

1,000~40,000 min

Air System

Angle Grinders .............................................................. p.1-13~14

Attachment Type Brushless Micro-Grinder

Attachments ........................................................................ p.1-19 Joints / Foot Controllers / Torque Sets .............................. p.1-20

Ultrasonic

Series Features ......................................................................... p.1-21~23 Controllers ........................................................................... p.1-24

System Chart ....................................................................... p.1-27 Controllers / Brushless Motors ........................................... p.1-28 Attachments .................................................................. p.1-29~31

Attachment Type High Torque Brushless Micro-Grinder 1,000~50,000 min

General Parts

Motor handpieces ............................................................... p.1-26

General Parts

Set Products ........................................................................ p.1-25

-1

Parts .................................................................................... p.1-32

Order by Code No.

Exclusive Tools

Exclusive Tools p. 1-1

p. 1-2

U ULT LTR RA A-- P PR RE EC CIIS SIIO ON N B BR RU US SH HLLE ES SS S M MIIC CR RO O -- G GR R II N ND DE ER R

General Parts

Exclusive Tools

Ultrasonic

General Parts

Exclusive Tools

General Parts

Air System

Ultrasonic

General Parts

Ultrasonic

Electric System

Air System

Ultrasonic

Air System

Electric System

Air System

Electric System

p. 1-4 p. 1-3

CAUTION CAUTION CAUTION CAUTION

Emax EVOlution Series

ADVANCED HIGH PERFORMANCE BRUSHLESS MICRO-GRINDER

Series

SERIES

“Powerful Torque” “Easy to Recognize Live Load Indicator” “No need to replace carbon brushes” (Brushless motor)

CAUTION

-1

CAUTION

n 0 mi

CAUTION

8233 (120V)

Model

EV410-120

Code No.

8225 (230V)

Model

EV410-230

Tool : Felt Bobs

check the power source plug type (p.4-6).

Standard Equipment • Micro Grinder (IR-310+ENK-410S) : 1 pc. • Collet ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each • Controller (NE249) : 1 pc. • Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc. Power Supply Cord : 1 pc., Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs., L Shaped Wrench (9) : 1 pc.

set

p.5-32

p.5-25~26

Exclusive Tools

※ Please

General Parts

Tool : Sand Paper Disk

Standard Set Code No.

Ultrasonic

Tool : Abrasive Belts

1,000~40,000 min-1

Air System

Tool : Flap Wheels

Exclusive Tools

Tool : Diamond Grinding Discs

General Parts

Tool : Electroplated Diamond Burs

Electric System

Ultrasonic

Air System

Ultrasonic

Example of Applications

※ Torque

p. 1-5

Air System

Electric System

Air System

1,0

Electric System

0, 4 ~ 0 0

p.1-20

Order by Code No.

p. 1-6

Emax EVOlution Series

ADVANCED HIGH PERFORMANCE CONTROLLER

ADVANCED HIGH PERFORMANCE BRUSHLESS MOTOR

Controller Memory Speed Function FiXpeed®

,SLJ[YPJHSS` +YP]LU

Upgraded Digital Display. EVOLUTION on Speed Control Volume with easy to recognize Load Indicator.

,TH_,=6 ,:7,9;

CAUTION

An Auto Cruise function is provided to fix the rpm at a fixed speed while working with the foot controller. This function allows the operator to work without using the foot controller when continuously performing the same task, thus reducing foot fatigue.

96;<: 047<3:, 79,:;6

Standard Type Motor Torque Type Motor

Forward / Reverse Select Switch

•:Continuous load area •:Intermittent load area •:Overload

Model

NE249 230

Description

Power Source 05+,? Weight

AC120/230V, 50-60Hz

Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc. Power Supply Cord : 1 pc.

7YV[LJ[P]L ,X\PW

Diversity for work efficiency

Switch Color : Blue

• Pin Wrench (K-233) : 1 pc.

Never connect to E-max Series controller.

ON / OFF Function

Never connect to E-max Series motor. ※ Please

check the power source plug type (p.4-6).

Advanced User Friendly Design

Code No.

8087

Model

ENK-250T

108

1,000~25,000 min-1 • Combines the best of both high speed and high torque. It is perfect for applications requiring large burs. ax. Power M Max. Torque With Straight Cord Weight

: 76 W : 4.8 cN·m : 1.5 m : 147 g (w/o cord)

Never connect to E-max Series controller.

Switch Color : Green

Order by Code No.

Exclusive Tools

Integrated handle for carrying. The design ensures ease of use by allowing the handpiece and tools to be placed on the top.

Torque Type Motor

Exclusive Tools

p. 1-7

Exclusive Tools

2 Sets of motors can be connected at the same time, to further improve work efficiency. (The motors cannot be used simutaneously)

: 73 W : 4.3 cN·m : 1.5 m : 90 g (w/o cord)

Standard Accessories

Motor B

W130 x D254 x H97 mm 2.3 kg

ax. Power M Max. Torque With Straight Cord Weight

General Parts

05+,?

Emax EVOlution Controller

1,000~40,000 min

• Excellent combination of high speed, lightweight, small diameter and high torque. This lightweight and compact general-use type is perfect for precision work.

General Parts

Dimensions

ENK-410S

Memory Speed Function FiXpeed®

,?*3<:0=, Specifications ;663:

8086

97 97 -1

Ultrasonic

8227 (230V)

40000

Ultrasonic

Ultrasonic ,_JS\ZP]L ;VVSZ

,_JS\ZP]L ;VVSZ Ultrasonic

Model

Code No.

30000

Air System

Code No.

Controller

NE249 120

N ( / min-1 )

Standard Type Motor

ON / OFF Function

Model

20000

Air System

10000

Motor A

8224 (120V)

CAUTION

Easy to operate by one finger

Code No.

CAUTION

ø12mm Speed Control Volume

*(<;065

EVO-S

Forward / Reverse rotation can be selected.

.,5,9(3 7(9;:

,?*3<:0=, ;663:

EVO-T (Torque Type) EVO-T

•• • • • •

*(<;065

use for Emax EVOlution

The switch provides a click sensation. A confirmation tone is reacted by the controller when the switch is operated. The motor type is distinguishable by the switch color.

EVO-S (Standard Type)

Blue Green

NAKANISHI Smart Switch

Emax EVOlution Torque Characteristic 6

Load Meter

.,5,9(3 7(9;:

※Exclusive

• High performance brushless motor eliminates the need of changing carbon brushes. • RPM variation is minimal even when load changes. Allowing difficult and stable cutting in stress free motion. Suitable performance for finish grinding. • Provides superior quietness and smoothness from low speed to high speed.

1,000~40,000 min (ENK-410S) 1,000~25,000 min-1 (ENK-250T)

Electric System

96;<: 047<3:, 79,:;6

Auto Cruise Function

NAKANISHI Smart Switch Color -1

ø24.5 φ28.4

CAUTION

Provides choice of various applications.

Electric System

(PY +YP]LU Electric System.LULYHS 7HY[ZAir System

Motor speed digital display

2 Types of Motors

ø28.4 φ28.4

,TH_,=6 ,:7,9;

A new feature is the "FiXpeed®" function, which allows the user to memorize RPMs in advance. The frequently used speed can be set at the touch of a button regardless of the volume position. Furthermore, A and B can be set independently, so A can be controlled by FiXpeed and B can be controlled variably with a foot controller to help improve work efficiency.

Excellent Durability

T (cN·m)

,SLJ[YPJHSS` +YP]LU

Advanced Control Function

Motor

p. 1-8

System Chart ... Emax EVOlution Series / ROTUS Series

Code No.

1147

Model

Attachment

※ Compatible

with attachments from E-max and ROTUS system.

IR-310 Ring Type

1005

,SLJ[YPJHSS` +YP]LU

,TH_,=6 ,:7,9;

• 1016

Pistol-Type Polisher

HG-200

(Reciprocating motion)

Built-in Motor

6 mm Torque Type※ 1

1017

LUSTER 1483 NLS-110

BMH-300

*(<;065

1006

Extension Joint 1015 CN-01

90° Angle Type

1014

FC-64

IC-300

Code No.

Model

8233 (120V) 8225 (230V)

EV410-120 EV410-230

Standard Equipment • Micro Grinder (IR-310+ENK-410S) : 1 pc. • Collet ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each • Controller (NE249) : 1 pc. • Accessories : Handpiece Holder : 1 pc. Handpiece Stand : 1 pc. Power Supply Cord : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench (9) : 1 pc.

KC-300 50° Angle Type

1/4 Speed Reducer 1009 RG-01

CAUTION

Ultrasonic

• Air Line Kit

(Reciprocating motion)

※ Can be connected between the motor and the attachment when a

,?*3<:0=, ;663:

higher level of torque is required.

ROTUS Series

Pencil-Type Reciprocating Polishing Finisher (Reciprocating motion)

Pencil-Type Reciprocating Polishing Finisher

• Foot Controller

(Right to Left motion)

Code No.

Model

1163

ROTUS-IR

Standard Equipment

7YV[LJ[P]L ,X\PW Hammer Action Type

1064

AFC-45

HA-500

※ This Air Line Kit is designed for use with the

AFC-45 Foot Controller, Code No.1064.

※ 1 : Use 6 mm Torque Type ENK-250T to connect HG-200

Order by Code No.

Exclusive Tools

Small-sized Handy Belt Sander

• Air Grinder (IR-310+IM-301) : 1 pc. • Collet ø3.0mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each • Air Line Kit (AL-H1207F) : 1 pc. • Foot Controller (AFC-45) : 1 pc. • Accessories : Piping Hose 2m (K-275) : 1 pc. Lubricating Oil (K-211) : 1 pc. Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 2 pcs. L Shaped Wrench (9) : 1 pc.

Exclusive Tools

FINE BELT SANDER 1146 KBS-101

Details of Maximum Allowable speed on intermittent use or continuous use p.1-11~20

ROTUS Standard Set

General Parts

• Air Motor with Hose 360˚ Twist-Free Joint Mechanism 1004 IM-301 3,000~30,000 min-1

AL-H1207F

General Parts

SWING-LUSTER 1380 SLS-16

4507

Ultrasonic

1/15 Speed Reducer 1010 RG-02

Pistol-Type Polisher

8060

CAUTION

LS-100

MINI-LUSTER 1307 ML-8

05+,?

8106

Exclusive use for Emax EVOlution

Engraving and Ornament Processing Work Hammer

p. 1-9

• Torque Type Motor with Cord 8087 ENK-250T 1,000~25,000 min-1

Air System

7YV[LJ[P]L ,X\PW

Speed Reducer · Extension Joint

90° Mini Angle Type (Very Small Head)

LUSTER 1302

General Parts

05+,?

MFC-300M

Ultrasonic ,_JS\ZP]L ;VVSZ

,_JS\ZP]L ;VVSZ Ultrasonic ,?*3<:0=, ;663:

1013

• Foot Controller

Standard Set

Air System

.,5,9(3 7(9;:

90° Mini Angle Type

8224 (120V) NE249 120 8227 (230V) NE249 230

Air System

.,5,9(3 7(9;:

• Wide selection of attachments available depending on the application.

MFC-300S

• Standard Type Motor with Cord 8086 ENK-410S 1,000~40,000 min-1

Electric System

96;<: 047<3:, 79,:;6

1012

Series

Electric System

(PY +YP]LU Electric System.LULYHS 7HY[ZAir System

96;<: 047<3:, 79,:;6

CAUTION

Motor

Exclusive use for Emax EVOlution

Long Type CAUTION

Sets

Lever Type

Electric System

,TH_,=6 ,:7,9;

Controller

IH-300

p.1-10

Emax EVOlution Series RING TYPE MICRO-GRINDER

PRECISION MICRO-GRINDER

Ring Type Attachment

Long Type Attachment

Ring Type Chucking System

Tip diameter ø13 mm

This unique slim body makes it ideal for cutting and grinding the bottom surface of deep ribs or holes. Collet is tightened by a wrench. The tip diameter is Ø13 mm.

Code No.

Weight : 92 g Standard Size Collet

Model

IR-310

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

Optional Collets : CHH Group are shown in page (p.4-3)

120

35,000 min-1 Max. Weight : 156 g Standard Size Collet

Standard Accessories

ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

CAUTION

1147

CAUTION

Code No.

ø13

One-touch ring type bur replacement. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows fine finishing on delicate parts.

40,000 min-1 Max.

LONG TYPE MICRO-GRINDER

• Wrench (7 x 5.1), (6 x 4.5) : 1 pc. each • Pin Wrench (K-233) : 1 pc.

62.3

Optional Collets : CHM Group are shown in page (p.4-4)

CAUTION

ENK-410S

Attachment

Motor

BMH-300

ENK-410S

CAUTION

Electric System

1,000~35,000 min-1

Motor

Electric System

1,000~40,000 min-1

Electric System

Long Type Attachment + Standard Type Motor Combination Example

IR-310

BMH-300

Model

Standard Accessories

ø3.0 mm (CHM-3.0)

Ring Type Attachment + Standard Type Motor Combination Example Attachment

1017

ø13 62.3

1,000~25,000 min-1

Motor

IR-310

ENK-250T

Ultrasonic

Emax EVOlution Controller (p.1-7)

1147+ 8086 ø12.8 1147+ 8087 ø12.8

ℓ1

ℓ2

Weight

Max. Torque

Speed Range

Collet

Combination Example

-1

1017+ 8086

ø24.5

64.2

161.2

182 g (

※

)

4.3 cN· m

1,000~40,000 min

ø0.3~ø3.175 mm CHH Group (p.4-3)

ø28.4

64.2

108

172.2

239 g (

※

)

4.8 cN· m

1,000~25,000 min-1

ø0.3~ø3.175 mm CHH Group (p.4-3)

Outside Diameter

Refer to the dimensions

Weight

246 g ( ※ )

Max. Torque

4.3 cN· m

Speed Range

1,000~35,000 min

Collet -1

ø0.3~ø3.175 mm CHM Group (p.4-4) ※ Weight (w/o Straight Cord)

Exclusive Tools

Never connect to E-max Series Controller.

Exclusive Tools

Never connect to E-max Series Controller.

General Parts

Emax EVOlution Controller (p.1-7)

General Parts

Ultrasonic

General Parts

Ultrasonic

Combination Example

Attachment

Air System

Ring Type Attachment + Torque Type Motor Combination Example

※ Weight (w/o Straight Cord)

p.1-11

Order by Code No.

p.1-12

Emax EVOlution Series MINI ANGLE TYPE MICRO-GRINDER

ANGLE TYPE GRINDER

Mini Angle Type Attachment Exclusive Tools

Most suitable for polishing flat surfaces at speed

p.5-31

Suitable for chamfering and deburring the inside of the slit pipe. The smallest angle type attachment in NAKANISHI's lineup. Various ø1.6 mm exclusive tools are available.

15,000 min-1 Max.

Standard Size Collet ø1.6 mm (K-253)

CAUTION

Minimum Inner Diameter : ø20 mm Holding tool width : 11.9 mm Weight : 50 g Speed Reduction Ratio : 10/11

Model

MFC-300M

Exclusive Tools

Code No.

p.5-25~ 30

Mini Angle Type Code No.

1012

Model

MFC-300S

Standard Accessories

• Collet Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc.

ø8.5

Exclusive Tools

61.9

ø1

CAUTION

1,000~15,000 min-1

アタッチメントアタッチメント Attachment

MFC-300S MFC-300S MFC-300M

Code No.

p.5-25~ 30

1014

KC-300

Model

Standard Accessories

ø3.0 mm (CHC-3.0)

• Collet Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. • Standard Accessories : 1 set

90° Angle Type Attachment + Standard Type Motor Combination Example

モーター Motor モーター

NK-351 NK-351 ENK-410S

CAUTION

Angle Type (50°)

Optional Collets : CHC Group are shown in page (p.4-3)

Mini Angle Type Attachment + Standard Type Motor Combination Example

IC-300

Model

• Collet Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. • Standard Accessories : 1 set

Weight : 45 g Speed Reduction Ratio : 3/4 Use the motor in reverse rotation for clockwise rotation. Standard Size Collet

1006

Standard Accessories

ø3.0 mm (CHC-3.0)

• Collet Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc.

70.3

p.4-4

Standard Size Collet

Angle Type (90°)

Optional Collets : CHC Group are shown in page (p.4-3)

Standard Accessories

ø6.8

30,000 min-1 Max. Weight : 45 g Speed Reduction Ratio : 3/4

750~22,500 min-1

装着装着 Attachment アタッチメントアタッチメント

IC-300 IC-300 IC-300

Electric System

p.5-31

1013

57.3

ø12.8

Electric System

ø1.6 mm (K-252)

Exclusive Tools

Code No.

9.5

p.5-31

p.4-4

Standard Size Collet

Mini Angle Type (Very Small Head)

13.8

CAUTION

Exclusive Tools

p.5-25~30

Suitable for grinding and polishing process with shaft mounted tools. Perfect for finishing bottom surfaces and other tight, hard to reach areas.

69.4

Minimum Inner Diameter : ø13 mm Holding tool width : 7.2 mm Weight : 47 g Speed Reduction Ratio : 10/11

Exclusive Tools

20.2

Bur Only ø1.6 mm

Angle Type Attachment

20 .1

For Chamfering Deep Hole

ANGLE TYPE MICRO-GRINDER

モーターモーター Motor

NK-351 NK-351 ENK-410S

9.5

Mini Angle Type Attachment + Standard Type Motor Combination Example 13.8

1,000~15,000 min

69.4

Attachment アタッチメントアタッチメント

-1

MFC-300S MFC-300S MFC-300S

Air System

69.4

50° Angle Type Attachment + Standard Type Motor Combination Example

Motor モーターモーター

ENK-410S NK-351 NK-351

750~22,500 min-1

70.3

KC-300 KC-300

モータ Motor

NK-351 ENK-410S

Ultrasonic

Use the motor in reverse rotation for clockwise rotation.

Ultrasonic

13.8

アタッチメント Attachment

70.3

Emax EVOlution Controller (p.1-7) <Code No. : 8224 (120V) · Model : NE249 120> <Code No. : 8227 (230V) · Model : NE249 230>

ℓ1

ℓ2

ø6.8

ø24.5

ø8.5

ø24.5

Weight

192

137 g (

193

140 g (

Never connect to E-max Series Controller. ※ ※

) )

Max. Torque

Speed Range

4.3 cN· m

1,000~15,000 min-1

ø1.6 mm (K-253) (p.4-4)

4.3 cN· m

-1

ø1.6 mm (K-252) (p.4-4)

1,000~15,000 min

※ Weight (w/o Straight Cord)

Combination Example

ℓ1

ℓ2

20.2

ø24.5

57.3

154.3

20.1

ø24.5

61.9

158.9

Weight

135 g ( 135

Max. Torque ※

)

g (※)

4.3 cN· m 4.3 cN· m

Speed Range

Collet -1

750~22,500 min 750~22,500 min

-1

※ Weight (w/o Straight Cord)

Standard Accessories

Code No.

Carbide Cutters

Mounted Points

Rubberized Abrasives

64101 64102 64103 64203 64207

Description Rubber Pad (Small) O.D. ø10 mm Rubber Pad (Med) O.D. ø20 mm Rubber Pad (Large) O.D. ø30 mm Sand Paper Disk for small pad ø11 Sand Paper Disk for small pad ø11

ø1.0~ø3.175 mm CHC Group (p.4-3)

Package

1 pc./pack #180 #600

5 pcs./pack

Code No.

64213 64217 64223 64227

Description Sand Paper Disk for med. pad ø21 Sand Paper Disk for med. pad ø21 Sand Paper Disk for large pad ø31 Sand Paper Disk for large pad ø31

Package

#180 #600 #180 #600

5 pcs./pack

Exclusive Tools

1006 + 8086 1014 + 8086

Exclusive Tools

TOOL : ø1.6mm

Electroplated Diamond Burs

Collet

General Parts

1013 + 8086 1012+ 8086

General Parts

Never connect to E-max Series Controller.

Combination Example

p.1-13

Emax EVOlution Controller (p.1-7)

• Exclusive tools for Angle Type Attachment p.5-25~30

Order by Code No.

p.1-14

Emax EVOlution Series MINI-LUSTER

PENCIL-TYPE RECIPROCATING POLISHING FINISHER

MINI-LUSTER Attachment mm

Exclusive Tools

Reciprocating Motion

SWING-LUSTER Attachment Stroke Range 0~1.6

p.5-19~ 22

Right to Left Motion

Exclusive Tools

p.5-23~ 24

The pencil type grip is most suitable for polishing narrow grooves, details, etc.

High speed grinding and polishing operations can be performed while maintaining the fine and delicate feel of hand polishing.

Lightweight, compact design and minimal vibration helps keep the hand free from fatigue for long continuous operation.

Lightweight pencil type design makes it easy to work in tight areas.

By using the provided grindstone holder, various tools such as oil stones, super stones, diamond files, etc. can be used.

Easily adjustable stroke length allows efficient work on minute areas of large sections.

Ergonomically designed to provide high sensitivity for precision work.

85.4

25,000 min-1 Max.

p.5-19~ 22

Code No.

1307

Model

ML-8

MINI-LUSTER Attachment + Standard Type Motor Combination Example

装着アタッチメント

モータ

NK-351

装着アタッチメント

モータ

ML-2

NK-351

アタッチメント

モータ

SLS-16

Model

SLS-16

装着アタッチメント

モータ

ML-8

NK-351

装着アタッチメント

モータ

ML-4

NK-351

装着アタッチメント

モータ

• Wrench (16 x 18), (20 x 24) : 1 pc. each • Allen Wrench (1.5 mm) : 1 pc. • Standard Accessories : 1 set

SWING-LUSTER Attachment + Standard Type Motor Combination Example Reciprocating Stroke

ML-2

NK-351

アタッチメント Attachment

Motor モータ

SLS-16 SLS-16

0~7,650 times/min

NK-351 ENK-410S

ML-4

1380

ENK-410S NK-351

NK-351

Outside Diameter

Max. Torque

Reciprocating Stroke

Max. Tool Shank

Combination Example

Outside Diameter

Weight

Max. Torque

Reciprocating Stroke

Max. Tool Shank

4.3 cN· m

0~6,380 times/min

ø3.5 mm (screw clamp type)

1380 + 8086

Refer to the dimensions

217 g ( ※ )

4.3 cN· m

0~7,650 times/min

ø5.0 mm (screw clamp type)

※ Weight (w/o Straight Cord)

Standard Accessories

p.1-15

Description

Spring Holder Ceramic Fiber Grindstone Holder Electroplated Diamond File 1.25 x 4 x 50 #100 Ceramic Fiber Grindstone 1 x 6 x 50 #1200

Package

1 pc. each

• Exclusive tools p.5-19~22

※ Weight (w/o Straight Cord)

Standard Accessories

Code No.

62510 62814 60520

Description Ceramic Fiber Grindstone Holder Electroplated Diamond File 1.25 x 4 x 50 #100 Ceramic Fiber Grindstone 1 x 6 x 50 #1200

Package 1 pc. each

• Exclusive tools p.5-23~24

Order by Code No.

Exclusive Tools

220

g (※)

Exclusive Tools

Refer to the dimensions

Weight

Never connect to E-max Series Controller.

General Parts

Emax EVOlution Controller (p.1-7)

General Parts

1307+ 8086

62751 62510 62814 60520

Ultrasonic

Emax EVOlution Controller (p.1-7)

Never connect to E-max Series Controller.

Combination Example

Code No.

Air System

0~6,380 times/min

モータ Motor

ML-8 ML-8

Code No.

Air System

装着

アタッチメント Attachment

p.5-23~ 24

Standard Accessories

The stroke range is bigger in proportion to the distance from the fulcrum.

• Allen Wrench (1.5 mm) : 1 pc. • Standard Accessories : 1 set

CAUTION

(0.8 mm)

Standard Accessories

Reciprocating Stroke

Exclusive Tools

Stroke

CAUTION

Electric System

Exclusive Tools

Reciprocating Stroke (variable) : 0~7,650 times/min Stroke Range (variable) :0~1.6 mm Weight : 127 g Max. tool shank diameter ø5.0 mm, Screw clamp type

Electric System

Stroke Range (Fixed) : 0.8 mm Reciprocating Stroke (Variable) : 0~6,380 times/min Weight : 130 g Max. tool shank diameter ø3.5 mm, Screw clamp type

CAUTION

30,000 min-1 Max.

ø15

CAUTION

¥ ¥

Stroke Range 0.8

SWING-LUSTER

p.1-16

Emax EVOlution Series FINE BELT SANDER

SMALL-SIZED HANDY BELT SANDER

PISTOL-TYPE RECIPROCATING POLISHING FINISHER

FINE BELT SANDER Attachment Exclusive Tools

LUSTER With Motor ON / OFF Switch

p.5-32

Very high belt speed, ideal for applications from deburring to finishing. Belt runs Approx. 0~705 m/min Lightweight, compact, minimal vibration and a small diameter grip design helps keep the hand free from fatigue for long, continuous operation. The angle of the belt section is fully adjustable. The belt can be changed easily with the lever release. 4, 6, 8 mm width belts are available.

CAUTION

LUSTER

Exclusive Tools

p.5-13~ 18

Powerful reciprocating stroke polisher equipped with 1/4 Speed Reducer to multiply the torque by 4 times. Reciprocating speed and stroke can be easily and continuously controlled. LUSTER NLS has a built-in motor. Insert the cord plug into the controller.

30,000 min-1 Max. Belt Speed : 0~705 m/min Weight : 350 g Belt Sizes : 4, 6, 8 mm Wide × 300 mm long

CAUTION

Exclusive Tools

Reciprocating Motion

LUSTER

p.5-32

CAUTION

Reciprocating Stroke

Grinding a curved surface

Code No.

1146

Model

1483

Model

NLS-110

KBS-101

Standard Accessories

Grinding a flat surface

• Allen Wrench (3 mm) : 1 pc. • Standard Accessories : 1 set

Stroke Range : 0~6 mm (variable) Reciprocating Stroke : 0~6,300 times/min (variable) Max. Torque : 17.2 cN· m Weight : 800 g (w/o cord) With Straight Cord : 1.5 m

モーターモーター Motor

NK-351 NK-351 ENK-410S

Air System

アタッチメントアタッチメント Attachment KBS-100 KBS-100 KBS-101

The grinding surface can be set at any angle between 0 and 360° enabling grinding of bottom, right, left and top surfaces without moving the machine itself. Mountable tool : Screw clamp type. Max. Tool Shank ø6.4 mm

25,000 min-1 Max. Specifications

FINE BELT SANDER Attachment + Standard Type Motor Combination Example 0~705 m/min

Code No.

Electric System

Stroke Range : 0~6 mm adjustable by allen wrench.

Electric System

0~6,300 times/min

185

The angle of the belt section is fully adjustable

CAUTION

Standard Accessories

With Motor ON / OFF Switch

Ultrasonic

Designed with comfortable rubber-grip. Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation.

Ultrasonic

• Allen Wrench (2 mm), (3 mm) : 1 pc. each • Lubricating Oil • Lubrication Nozzle for LUSTER Exclusive Tools p.5-13~ 18 • Standard Accessories : 1 set

Emax EVOlution Controller (p.1-7) <Code No. : 8224 (120V) · Model : NE249 120> <Code No. : 8227 (230V) · Model : NE249 230>

Never connect to E-max Series Controller.

Outside Diameter

Weight

Max. Torque

Belt Speed

Belt Width

1146 + 8086

Refer to the dimensions

440 g ( ※ )

4.3 cN· m

0~705 m/min

4 mm, 6 mm, 8 mm ※ Weight (w/o Straight Cord)

Standard Accessories

Description Width 4 mm #120 Width 4 mm #240 Width 4 mm #400 Width 6 mm #120 Width 6 mm #240 Width 6 mm #400 Width 8 mm #120 Width 8 mm #240 Width 8 mm #400

Package

Spare Parts Product 2 pcs. each

1483

Max. Torque

Reciprocating Stroke

Max. Tool Shank

800 g ( ※ ) 17.2 cN· m

Weight

0~6,300 times/min

ø6.4 mm (screw clamp type) ※ Weight (w/o Straight Cord)

Standard Accessories

Description

Code No.

Model

Tension Pulley

1103

TP-12A

Tension Pulley Assembly

1104

TPA-12A

Code No.

62502 62505 62751 62525 62526

Description

Stone Holder Stone Holder Spring Holder Rectangular Pad Rod for Rectangular Pad

Package

Code No.

1 pc./pack

62527 62552 62555 62557 62559

Description

Angle Rod Sand Paper Tip Sand Paper Tip Sand Paper Tip Sand Paper Tip

#120 #320 #600 #1000

Package 1 pc./pack

10 pcs./pack

• Exclusive tools for LUSTER p.5-13~18

Order by Code No.

Exclusive Tools

Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt

Outside Diameter

Refer to the dimensions

Exclusive Tools

Exclusive Tools p.1-17

64902 64904 64906 64912 64914 64916 64922 64924 64926

Code No.

General Parts

Combination Example

Code No.

General Parts

Emax EVOlution Controller (p.1-7)

Never connect to E-max Series Controller.

p.1-18

Emax EVOlution Series Lever Type Attachment Code No.

1005

Model

6 mm Torque Type Attachment Code No.

IH-300

1016

Model

1/4 Speed Reducer Code No.

HG-200

1009

Model

Extension Joint RG-01

Code No.

1015

Model

102

50.1

,TH_,=6 ,:7,9;

ø18.9 Weight : 83 g Standard Accessories

Optional Collets : CHH Group are shown in page (p.4-3)

Optional Collets : CHG Group are shown in page (p.4-3)

• Pin Wrench (K-233) : 1 pc.

Standard Accessories

• Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Pin Wrench (K-233) : 1 pc.

CAUTION

LS-100 119

Model

1010

Model

8106

Model

FC-64

56.1

ø20

120

30,000 min-1 Max. Mounted between an attachment and a motor. The speed is reduced to 1/15 while the torque is multiplied by 15 times. Suitable for high torque grinding process or drilling. Weight : 93 g

Variable speed control. For Emax EVOlution (NE249)

Standard Accessories

42.8

• Wrench (7 x 5.5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Oil and Oil offer machine • Hammer Bit (For replacement) : 2 pcs.

• Pin Wrench (K-233) : 1 pc.

Hammer Bit to be machined to required shapes Code No.

Package

65301

3 pcs./pack

p.5-13~ 18

Torque Set

Standard Accessories

Code No.

Package

1,000~25,000 min-1

For heavy duty and larger tools, the Torque type promises to expand the range of operation.

1 pc./pack

Ring Type IR-310 is the standard attachment for Emax EVOlution torque set EV250-120, EV250-230.

10 pcs./pack

Code No.

8234 (120V)

Model

EV250-120

Code No.

8226 (230V)

Model

EV250-230

※ Please

General Parts

Description Stone Holder Stone Holder Spring Holder Rectangular Pad Rod for Rectangular Pad Angle Rod Sand Paper Tip #120 Sand Paper Tip #320 Sand Paper Tip #600 Sand Paper Tip #1000

General Parts

62502 ,?*3<:0=, ;663: 62505 62751 62525 62526 62527 05+,? 62552 62555 62557 62559 7YV[LJ[P]L ,X\PW

Ultrasonic

• Allen Wrench (2 mm), (3 mm) : 1 pc. each • Lubricating Oil • Lubrication Nozzle for LUSTER • Standard Accessories : 1 set

Ultrasonic

(SUS-420, heat treated, approx, HRC50)

Standard Accessories

Exclusive Tools

16,000 min-1 Max. A wide variety of patterns can be produced by adjusting the spring pressure and hammer speed. Lightweight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Weight : 95 g Self lubricating hammer mechanism ensure excellent durability. Stroke Range : 0.4 mm Stroke Times : 25~4,000 times/min Stroke Spring Pressure : 4.4~7.1 N (Ring Adjustment Type)

Air System

.,5,9(3 High 7(9;:

Weight : 680 g Max. tool shank diameter ø6.4 mm, Screw clamp type

Code No.

25,000 min-1 Max.

performance grinding & polishing with high power and reciprocating stroke. Well-balanced, rubber-grip absorbs vibration. Stroke Range : 0~6 mm (variable) Reciprocating Stroke : 0~6,300 times/min (variable) *(<;065

RG-02

HA-500

ø14

Reciprocating motion

8060

Code No.

Foot Controller

ø18.9

Model

Code No.

ø14

1302

Hammer Attachment

CAUTION

Electric System

LUSTER Attachment (Pistol-Type Polisher)

General Parts

7YV[LJ[P]L ,X\PW

Weight : 68 g Standard Accessories

1/15 Speed Reducer

Code 96;<: No. 047<3:, 79,:;6

35,000 min-1 Max. Speed Ratio 1 : 1 This is a joint to be connected between a motor and an attachment to extend the total length of the attachment.

ø6.0 mm (CHG-6.0)

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1pc.

Ultrasonic ,_JS\ZP]L ;VVSZ

General Parts

05+,?

Weight : 210 g Standard Size Collet

ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

CAUTION

,_JS\ZP]L ;VVSZ Ultrasonic ,?*3<:0=, ;663:

Weight : 62 g Standard Size Collet

30,000 min-1 Max. Mounted between an attachment and a motor. The speed is reduced to 1/4 while the torque is multiplied by 4 times. Suitable for high torque grinding process or drilling.

Air System

*(<;065

40,000 min Max. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows fine finishing of delicate parts. Lever Type one touch bur release.

30,000 min-1 Max. ø6.0 mm shank burs ready. The resistance produced by cutting and grinding is absorbed by a special rubber grip to eliminate slipping. Collet is tightened by a wrench.

Electric System

.,5,9(3 7(9;:

Use ENK-250T to connect HG-200. -1

(PY +YP]LU Electric System.LULYHS 7HY[ZAir System

96;<: 047<3:, 79,:;6

,SLJ[YPJHSS` +YP]LU

,SLJ[YPJHSS` +YP]LU CAUTION

ø18.9

ø13.2

ø25

41.9

,TH_,=6 ,:7,9;

CN-01

check the power source plug type (p.4-6).

Standard Equipment

Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.

Order by Code No.

Exclusive Tools

Interchangeable with attachments form the E-max and ROTUS system.

Exclusive Tools

Exclusive Tools p.1-19

• Micro Grinder (IR-310+ENK-250T) : 1 pc. • Collet ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each • Controller (NE249) : 1 pc. • Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc. Power Supply Cord : 1 pc., Wrench (7 x 5.1) : 1 pc. Pin Wrench (K-233) : 1 pc., L Shaped Wrench (9) : 1 pc.

p.1-20

Espert 500 Series

HIGH TORQUE BRUSHLESS MICRO-GRINDER

Series

Espert 500

ESPERT 500 SERIES

Standard Set

Low Noise, Low Vibration

The Ultimate in Everything

The brushless motor and incorporated cooling fan have reduced the vibration and noise levels dramatically compared with conventional models, resulting in a quieter, more comfortable work environment.

Speed : 1,000~50,000 min-1 NAKANISHI Smart Switch Max. Output : 200W CAUTION

Code No.

9881 (120V) 9882 (230V)

Model

ES50C-HR

Wide Range of Collets Available Collet sizes range from a tiny 0.3 mm up, with a wide variety of sizes available. (p.4-3~4) Tools can be changed without the use of any wrenches.

CAUTION

0 0,0

Electric System

-1

n mi

CAUTION

5 0~

Air System

0 1,0

Compact Motor Handpiece Code No.

Features of Motor Handpiece

Standard Size Collet : ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35)

Blue Gray

NAKANISHI Smart Switch

Simple Screw on Attachments

Micro Grinder & Handpiece Stand This specially designed micromotor stand allows easy pick-up and set-down of the micro-grinder. Strong, but soft to the touch, the micro-grinder stand contains convenient, integrated storage compartments for adjustment wrenches and a spare collet.

Order by Code No.

Exclusive Tools

NAKANISHI Smart Switch

NAKANISHI's ultra-precision technology ensures a center runout below 0.02 mm, which allows for very high precision finishing.

Exclusive Tools

The switch has a moderate clicking sensation, and the controller emits a beeping sound in response to operation. The switch color indicates the motor type.

High Precision

9 different types of attachments making an almost infinite number of applications possible.

General Parts

NAKANISHI Smart Switch Color

140W 200W

9 Types of Attachments Available

General Parts

Then handpiece has a patented built-in-dust protection system to prevent the infiltration of dust and debris into the front bearings. This NAKANISHI patented design assures long-term durability.

Very high torque from compact motors.

p.1-21

Special Dust-Proof Mechanism

Ultrasonic

High performance brushless motor eliminates the need to change carbon brushes. NAKANISHI's internal load test has demonstrated continuous use for more than 5,000 hours.

2 Types of Motors (ENK-500C) (ENK-500T)

ENK50C-HR

Excellent Durability

-1

Speed is steplessly variable from 1,000~50,000 min-1. Smooth and powerful torque is delivered at both high and low speeds. The maximum speed of 50,000 min-1 allows high precision micro-processing.

• Compact Type • Torque Type

Model

Ultrasonic

Speed : 1,000~50,000 min

9091

p.1-22

Espert 500 Series

ADVANCED HIGH PERFORMANCE CONTROLLER

Espert 500

Series

ESPERT 500 SERIES

The Ultimate in Everything

Torque Set Code No.

9883 (120V) 9884 (230V)

Model

ES50T-HR

Portable Controller with Carrying Handle Very convenient to be carried. CAUTION

CAUTION

The electronic circuits are designed using NAKANISHI's proprietary technology to meet eco-friendly expectations by minimizing power consumption. Since power demands are minimal, no significant heat is generated and no cooling fan is required.

• Self Check Function (Maintenance Mode) • Smooth Operation • Operation Check Sound • Highly Visible and easy to operate front panel • 2-Digit Digital Display • A / B 2 Motors Can Be Connected

9794 (230V) NE96

Model ※ Please

check the power source plug type (p.4-6).

Specifications Description

Espert 500 Controller

Power Source

AC 120/230V, 50-60 Hz

Dimensions

W172 x D230 x H94 mm

Weight

2.6 kg

Accessories : Handpiece Holder : 1 pc. Handpiece Stand : 1 pc.

Exclusive Tools

Eco-Friendly Design

Other Features

9793 (120V) General Parts

An exclusive new feature of the Espert 500 system, the FiXpeed® system allows the user to independently preset the speed of motor A and motor B. For example motor A can be set to maintain the speed set by the FiXpeed® system while motor B has variable control using a foot pedal. This function allows for unprecedented flexibility.

Detects trouble and failures occurring within the motor or unit and displays them as one of seven types of error codes (E0-E6). This reassuring function permits the user to correct the problem. Possible errors are overload, open circuit, motor lock, controller overheat, etc.

Code No.

Ultrasonic

Memory Speed Function FiXpeed

Error Code Display Function

Exclusive Tools

The controller is equipped with an auto cruise function that operates the micro-grinder at a preset speed without the need to use the foot pedal. This function eliminates foot fatigue during prolonged operation.

You no longer need to push a switch on the controller to switch between hand and foot pedal control. If you want to operate the motor handpiece by hand simply push the NAKANISHI Smart Switch, if you want to use foot pedal control simply depress the foot pedal.

General Parts

Auto Cruise Function

Ultrasonic

The operation of all Espert 500 functions is controlled by a high performance microcomputer (CPU) that is programmed with NAKANISHI's proprietary technology. NAKANISHI's CPU has direct control of the brushless micro-grinder allowing smooth and highly precise cutting and polishing of a wide variety of materials. Bur "chatter" has been eliminated. The system automatically senses which micromotor is attached (ENK-500C or ENK-500T) and self adjusts to provide optimum micro-grinder performance.

Simplified Hand and Foot Pedal Control

Air System

Optimal Control via Microcomputer

Electric System

Features of Controller

CAUTION

(Simultaneous motor operation is not allowable)

p.1-23

Order by Code No.

p.1-24

Espert 500 Series MOTOR-HANDPIECE

PRECISION BRUSHLESS MICRO-GRINDER

Motor Handpiece Espert 500

Sets With Motor ON/OFF Switch

,TH_,=6 ,:7,9;

コード番号

Espert 500 Standard Set

CAUTION

96;<: 047<3:, 79,:;6

Espert 500 Compact Motor Handpiece 1,000~50,000 min

-1

1,000~50,000 min

140w

• High Power System. <Max. Output 140W>

9091

Code No.

ENK50C-HR ES50C-HR 価格￥170,000

Model Code No.

コード番号

9085

型式

Standard Size Collet モータ

9882 (230V)

アタッチメント

コントロールユニット（NE96）1台

Standard Equipment

• Controller (NE96) : 1 pc. • Compact Motor Handpiece (ENK50C-HR) : 1 pc.

Standard Accessories

コンパク（ENK50C-HR）1台 • Wrench (7 xトモータハン 5.1) : 1 pc.ドピース • Pin コレッ Wrench (K-233) : 1CHH-3.0） pc. トチャックφ3.0（、φ2.35（CHH-2.35）各1本 • L Shaped Wrench (9) : 1 pc.

標準装備付属品

Standard Accessories

• Collet ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) • Handpiece Holder : 1 pc. • Handpiece Stand : 1 pc. • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

*(<;065

コード番号

アタッチメントホルダ 1個アタッチメントスタンド 1個スパナ（7×5.1）1枚ピンスパナ 1枚Ｌ型スパナ（9）500 1枚 Espert Torque

9091

ENK50C-HR

モータ

ENK-500C

7YV[LJ[P]L ,X\PW

Code No.

Model ※ Please

9884 (230V)

Standard Size Collet

9087

コード番号

9092

型式

NE96

型式

75,000

価格￥

ENK50T-HR

価格￥

95,000

アタッチメント

モータ

Standard Accessories

EHR-500 EHR-500

ENK-500T ENK-500T

9087

型式

Attachment

NE96

標準装備付属品

75,000

価格￥

コレットチャックφ3.0（CHH-3.0）、φ2.35（CHH-2.35）各1本スパナ（7×5.1）1枚ピンスパナ 1枚Ｌ型スパナ（9）1枚

Espert 500 Controller (p.1-24) <Code No. : 9793 (120V) · Model : NE96> <Code No. : 9794 (230V) · Model : NE96>

Standard Equipment

Code No.

ℓ1

ℓ2

9091 9092

ø13.3

ø26.8

59.4

107.8

ø13.3

ø28.3

59.4

121.4

Weight

Max. Output

Speed Range

Collet -1

167.2

210

g (※)

140W

1,000~50,000 min

180.8

250 g( ※ )

200W

1,000~50,000 min-1

Exclusive Tools

Standard Accessories

ø0.3~ø3.175 mm CHH Group (p.4-3)

※ Weight (w/o Coiled Cord)

p.1-25

コレッスパピンＬ型

D 1

Exclusive Tools

• Controller (NE96) : 1 pc. • Torque Motor Handpiece (ENK50T-HR) : 1 pc.

アタ

Motor

ES50T-HR check the power source plug type (p.4-6).

9092

標準装備付属品

Optional Collets : CHH Group are shown in page (p.4-3)

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

コード番号

General Parts

05+,?

ユニット

95,000 NE96

￥

General Parts

05+,?

モータ

価格 ENK50C-HR ENK-500T

アタッチメントモータコントロールユニット（NE96）1台 Attachment Motor EHR-500 ENK-500C EHR-500 ENK-500C トルクモータハンドピース（ENK50T-HR） 1台コレットチャックφ3.0（CHH-3.0）、φ2.35（CHH-2.35）各1本コレットチャックφ3.0（CHH-3.0）、φ2.35（CHH-2.35）各1本標準装備アタッチメントホルダ 1個標準装備スパナ（7×5.1）1枚付属品アタッチメントスタンド 1個付属品ピンスパナ 1枚スパナ（7×5.1）1枚Ｌ型スパナ（9）1枚ピンスパナ 1枚Ｌ型スパナ（9）1枚

コード番号

ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

9883 (120V)

型式

NAKANISHI Smart Switch (Gray)

コレットチャックφ3.0（CHH-3.0）、φ2.35（CHH-2.35）各1本 ENK50T-HR スパナ（7×5.1） 1枚標準装備 Model 付属品ピンスパナ 1枚Ｌ型スパナ（9）1枚

• Highest Power in its Class. <Max. Output 200W>

アタッチメント

Ultrasonic

,?*3<:0=, ;663:

200w

EHR-500

NE96

Ultrasonic

Ultrasonic ,_JS\ZP]L ;VVSZ

,_JS\ZP]L ;VVSZ Ultrasonic ,?*3<:0=, ;663:

1,000~50,000 min-1

9086 アタッチメント

ユニット

200w

EHR-500

9092

ENK-500C

95,000

価格￥ -1

アタッチメント

Code No.

Espert 500 Torque Set

Motor Handpiece

1,000~50,000 min 型式

モータ

EHR-500

9091 EHR-500

コード番号

NE96

Optional Collets : CHH Group are shown in page (p.4-3)

check the power source plug type (p.4-6).

アタッチメント

番号

ユニット

ENK-500C EHR-500 ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

ES50C-HR

Model ※ Please

9881 (120V)

コード番号

価格￥

コントコントロールユニット（NE96）1台トルコンパクトモータハンドピース（ENK50C-HR）1台 NAKANISHI Smart Switch (Blue) CAUTION CAUTION コレッコレットチャックφ3.0（CHH-3.0）、φ2.35（CHH-2.35）各1本標準装備アタッチメントホルダ 1個標準装備アタ付属品付属品アタアタッチメントスタンド 1個スパスパナ（7×5.1）1枚ピンピンスパナ 1枚コードＬ型Ｌ型スパナ型式（9）1枚 ES50T-HR 価格￥170,000 9086

140w

-1

170,000

ES50C-HR

型式

Air System

.,5,9(3 7(9;:

9085

Electric System

*(<;065

Memory Speed Function [FiXpeed® ]

Air System

.,5,9(3 7(9;:

High Power & High Torque !!

Electric System

96;<: 047<3:, 79,:;6

Speed Range : 1,000~50,000 min-1 Microprocessor controlled for optimal motor control Hand Switch [NAKANISHI Smart Switch]

,TH_,=6 ,:7,9;

(PY +YP]LU Electric System.LULYHS 7HY[ZAir System

CAUTION

,SLJ[YPJHSS` +YP]LU

Speed Range : 1,000~50,000 min-1 Microprocessor controlled for optimal motor control Hand Switch [NAKANISHI Smart Switch] Memory Speed Function [FiXpeed® ]

1,000~50,000 min-1

With Motor ON/OFF Switch

Order by Code No.

p.1-26

Espert 500 Series Espert 500 Series

Espert 500 Series System Chart Code No.

Espert 500 Controller

Model

Attachment Code No.

Ring Type 9090

Speed Reducer

Model

EHR-500

9793 (120V) 9794 (230V) NE96

Power Source : AC120/230V, 50-60 Hz Dimensions : W172 x D230 x H94 mm Weight : 2.6 kg Standard Accessories • Handpiece Holder : 1 pc. • Handpiece Stand : 1 pc.

1/4 Speed Reducer 1553 ERG-01B Lever Type 1515

Microprocessor controlled for optimal motor control. Memory Speed Function FiXpeed®.

※ Please

check the power supply cord plug type (p.4-6).

• May be connected between the motor and the attachment when required increased torque.

EHL-401

Motor

Compact Motor with Cord 9088 ENK-500C 1,000~50,000 min-1

CAUTION

EIC-300

9088

Model

ENK-500C

Controller

: 140 W : 6.0 cN·m : 1.5 m : 115 g (w/o cord)

Code No.

9089

Model

ENK-500T

Sets

1,000~50,000 min-1 Incorporates the NAKANISHI Smart Switch for easy ON / OFF operation. High-power, high-torque, high-speed brushless DC motor.

ELS-100

Ultrasonic

LUSTER (Reciprocating motion)

: 200 W : 8.7 cN·m : 1.5 m : 160 g (w/o cord)

121.4

Ultrasonic

utput Power O Max. Torque Cord Length Weight

200w

Air System

ERA-270

Air System

Espert 500 Torque Type Motor

90° Angle Torque Type

1516

107.8

EKC-300

Espert 500 Controller 9793 (120V) NE96 9794 (230V) 1551

140w

Incorporates the NAKANISHI Smart Switch for easy ON / OFF operation. Small, lightweight, high-speed brushless DC motor. utput Power O Max. Torque Cord Length Weight

50° Angle Type 1526

1,000~50,000 min

CAUTION

Electric System

90° Angle Type 1525

Code No.

CAUTION

-1

Electric System

Torque Motor with Cord 9089 ENK-500T 1,000~50,000 min-1

Espert 500 Compact Type Motor

ø28.3

CAUTION

EHG-400

ø26.8

6 mm Torque Type 1552

Espert 500 Standard Set MINI-LUSTER (Reciprocating motion) 1554

EML-8

Standard Equipment • Compact Motor Handpiece (ENK50C-HR) : 1 pc. • Collet ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) • Controller (NE96) : 1 pc. Standard Accessories • Handpiece Holder : 1 pc. • Handpiece Stand : 1 pc. • Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

Extension Adaptor ECN-011 1518

1/4 Speed Reducer ERG-01 1517

Exclusive Tools

Emax EVOlution, ELECTER E-max and ROTUS attachments can be connected using these adaptors.

General Parts

Exclusive Tools

EBS-101

ES50C-HR

Exclusive Tools

General Parts

Exclusive Tools

1145

Model

General Parts

FINE BELT SANDER

Code No.

9881 (120V) 9882 (230V)

Details of Maximum Allowable speed on intermittent use or continuous use p.1-29~31

p.1-27

Order by Code No.

p.1-28

Espert 500 Series

Code No.

EHR-500

1515

Code No.

ERA-270

Model

1525

Weight : 94 g

Weight : 70 g Standard Size Collet

ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

Optional Collets : CHH Group are shown in page (p.4-3)

Standard Accessories

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc.

64.3 ø12.8

27,000 min-1 Max. Large gear for better durability and high load capacity. Perfect for finishing bottom surfaces and other tight, hard to reach areas. Suitable for polishing a flat surface at speed with a grinding disk pad.

30,000 min-1 Max. Suitable for polishing a flat surface at speed with a grinding disk pad. Capable of applications for rough cutting to mirror finishing. Speed Reduction Ratio : 3/4

Speed Reduction Ratio : 1/1.5 Weight : 107 g Standard Size Collet

Weight : 54 g Standard Size Collet

Exclusive Tools

p.5-25~ 30

ø3.0 mm (CHS-3.0)

Optional Collets : CHC Group are shown in page (p.4-3) CAUTION

Optional Collets : CHS Group are shown in page (p.4-4)

Standard Accessories

• Wrench (20 x 24) : 1 pc. • Collet Wrench (K-231) : 1 pc. • Standard Accessories : 1 set

• Wrench (8 x 5) , (7 x 5.1) , (20 x 24) : 1 pc. each Standard Accessories

Code No.

EHG-400

64101 64102 64103 64203 64207 64213 64217 64223 64227

ø22.4

Code No.

1526

Standard Size Collet

Code No.

68.9

ø1

Model

ELS-100 119

Standard Accessories

30,000 min Max. Perfect for finishing bottom surfaces and other tight, hard to reach areas. Suitable for polishing a flat surface at speed with a grinding disk pad. Speed Reduction Ratio : 3/4. Use the motor in reverse rotation for clockwise rotation. -1

Weight : 54 g

Weight : 680 g Max. tool shank diameter ø6.4 mm, Screw clamp type

p.5-25~ 30

ø3.0 mm (CHC-3.0) Optional Collets : CHC Group are shown in page (p.4-3)

Standard Accessories

45 Exclusive Tools

p.5-13~ 18

• Allen Wrench (2 mm), (3 mm) : 1 pc. each • Lubricating Oil • Lubrication Nozzle for LUSTER • Standard Accessories : 1 set

• Wrench (20 x 24) : 1 pc. • Collet Wrench (K-231) : 1 pc. • Standard Accessories : 1 set

General Parts

Exclusive Tools

General Parts

Standard Size Collet

25,000 min-1 Max. High performance grinding & polishing with high power and reciprocating stroke. Well-balanced, rubber-grip absorbs vibration. Stroke Range : 0~6 mm (variable) Reciprocating Stroke (variable) : 0~6,300 times/min

Ultrasonic

• Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc.

Ultrasonic

ø22.4

Optional Collets : CHG Group are shown in page (p.4-3)

1516

Reciprocating motion

ø6.0 mm (CHG-6.0)

5 pcs./pack

LUSTER Attachment (Pistol-Type Polisher)

EKC-300

Model

#180 #600 #180 #600 #180 #600

ø20

Weight : 110 g

50° Angle Attachment

1 pc./pack

Air System

ø6.0 mm shank burs ready. Collet is tightened by a wrench.

Package

Air System

40,000 min-1 Max.

Description Rubber Pad (Small) O.D. ø10 mm Rubber Pad (Med) O.D. ø20 mm Rubber Pad (Large) O.D. ø30 mm Sand Paper Disk for small pad ø11 Sand Paper Disk for small pad ø11 Sand Paper Disk for med. pad ø21 Sand Paper Disk for med. pad ø21 Sand Paper Disk for large pad ø31 Sand Paper Disk for large pad ø31

113.7

Model

CAUTION

Electric System

1552

p.5-25~ 30

Electric System

Code No.

Exclusive Tools

ø3.0 mm (CHC-3.0)

Standard Accessories

6 mm Torque Type Attachment

EIC-300

20.2

ø13.3

50,000 min-1 Max. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows for fine finishing of delicate parts. Lever Type one touch bur release.

Standard Size Collet

Model

70.7

50,000 min-1 Max. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows for fine finishing of delicate parts. One-touch ring type bur replacement.

CAUTION

1551

ø17.4 ø22.4

ø13.3

Code No.

EHL-401 59.2

59.5

CAUTION

Model

ø22.4

Model

90° Angle Attachment

28.5

9090

90° Angle Torque Attachment

ø22.4

Code No.

Lever Type Attachment

ø22.4

Ring Type Attachment

Standard Accessories

Code No.

Standard Accessories

Code No.

1 pc./pack #180 #600 #180 #600 #180 #600

5 pcs./pack

62502 62505 62751 62525 62526 62527 62552 62555 62557 62559

Description Stone Holder Stone Holder Spring Holder Rectangular Pad Rod for Rectangular Pad Angle Rod Sand Paper Tip #120 Sand Paper Tip #320 Sand Paper Tip #600 Sand Paper Tip #1000

Package

1 pc./pack

10 pcs./pack

Order by Code No.

Exclusive Tools

Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.

Package

Exclusive Tools

Exclusive Tools p.1-29

64101 64102 64103 64203 64207 64213 64217 64223 64227

p.1-30

Espert 500 Series Reciprocating MINI-LUSTER Attachment (Pencil-Type Polishing Finisher) Code No.

1554

Model

Code No.

Stroke (Stroke EML-8 (0.8 mm) 0.8 mm)

Espert 500 Series Spare Parts

FINE BELT SANDER Attachment 1145

Model

Product

185

Reciprocating motion

ø15

ø3.3 ø8

84.5

30,000 min-1 Max.

91.1 25,000 min-1 Max. High Speed reciprocating polisher for rapid finishing of small surfaces. The lightweight pencil type design makes it very controllable. Ideal for small, tight areas such as tight corners, ribs, etc. Reciprocating Speed (variable) : 0~10,000 strokes/min Weight : 130 g Max. tool shank diameter ø3.5 mm, Exclusive Tools p.5-19~ 22 Screw clamp type Standard Accessories

CAUTION

• Allen Wrench (1.5 mm) : 1 pc. • Standard Accessories : 1 set

CAUTION

Standard Accessories

Code No.

Package

1 pc./pack

1/4 Speed Reducer

Code No.

1553

Model

ERG-01B

Very high belt speed, ideal for applications from deburring to radius finishing. Belt Speed : 0~705 m/min Weight : 355 g Belt Sizes : 4, 6, 8 mm wide x 300 mm long • Allen Wrench (3 mm) : 1 pc. Exclusive Tools • Standard Accessories : 1 set

Code No.

64902 64904 64906 64912 64914 64916 64922 64924 64926

Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt

Description Width 4 mm #120 Width 4 mm #240 Width 4 mm #400 Width 6 mm #120 Width 6 mm #240 Width 6 mm #400 Width 8 mm #120 Width 8 mm #240 Width 8 mm #400

8104

K-274

Espert 500 Compact Motor Cord

9093

ENKCD-50C

• Compact Motor Cord • 1.5 m Long

Espert 500 Torque Motor Cord

9094

ENKCD-50T

• Torque Motor Cord • 1.5 m Long

Extension Adaptor Code No.

1518

Model

CAUTION

2 pcs. each

ECN-011 29

ø22.4

Air System

The Adaptor can be used with the attachments for Emax EVOlution, E-max and ROTUS you already have. Weight : 31 g Standard Accessories

Ultrasonic

Model

Espert 500 Handpiece Stand

• Variable Speed Control

CAUTION

1/4 Speed Reducer 1517

FC-40

Package

• Pin Wrench (K-233) : 1 pc.

Code No.

1440

Standard Accessories

• Wrench (20 x 24) : 1 pc.

Standard Accessories

Foot Pedal

p.5-32

40,000 min-1 Max.

Mounted between an attachment and a motor. The speed is reduced to 1/4 while the torque is multiplied by 4 times. Suitable for high torque grinding process or drilling. Weight : 65 g

Specifications

Standard Accessories

30,000 min-1 Max.

Model

Electric System

Description Spring Holder Ceramic Fiber Grindstone Holder Electroplated Diamond File 1.25 x 4 x 50 #100 Ceramic Fiber Grindstone 1 x 6 x 50 #1200

Code No.

Electric System

62751 62510 62814 60520

Description

EBS-101

ERG-01 41

Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.

1/4 Speed Reducer

NK-500C E ENK-500T

(Planetary Gear)

ERG-01

Order by Code No.

Exclusive Tools

• Pin Wrench (K-233) : 1 pc.

Espert 500 Motor

General Parts

Standard Accessories

ECN-011

Exclusive Tools

The Speed Reducer can be used with the attachments for Emax EVOlution, E-max and ROTUS you already have. The speed is reduced to 1/4 while the torque is multiplied by 4 times. Suitable for high torque grinding process or drilling. Weight : 62 g

Extension Adaptor

General Parts

General Parts p.1-31

30,000 min-1 Max.

Emax EVOlution, ELECTER E-max, ROTUS Attachments

p.1-32

Air System Products INDEX CAUTION

CAUTION

Features ............................................................................. p.2-3~4 System Chart ......................................................................... p.2-5

Electric System

ROTUS Series

CAUTION

Air Motor ................................................................................ p.2-6 Set Product ........................................................................... p.2-6 Attachment / Air Motor / Parts ....................................... p.2-7~10

30,000 min

-1

Air System

Attachment Type Micro Air Grinder

IMPULSE Series Air Grinders ................................................................... p.2-13~14 Parts / Tools .................................................................. p.2-15~17

Ultrasonic

Features ......................................................................... p.2-11~12

Pencil Type Air Grinder 60,000 min

-1

General Parts

PRESTO II Set Product / Handpiece / Parts ....................................... p.2-18

p.2-1

Exclusive Tools

320,000 min

Exclusive Tools

Ultra-High Speed Air Turbine Grinder -1

Order by Code No.

p.2-2

ROTUS Series

ATTACHMENT TYPE MICRO AIR GRINDER

ROTUS Series

ROTUS SERIES ROTUS Standard Set Code No.

A Special Rotary Vane Air Motor is Incorporated

Model

ROTUS-IR

Twist Free Hose The grinder and dual hoses (air supply and exhaust) are not fixed, and the hoses swivel freely 360° without twisting. (IM-301)

The air motor utilizes a special vane design which keeps constant speed even under load, to provide stable grinding and polishing operation. CAUTION

1163

CAUTION

Excellent quietness with Silencer

13 different types of attachments making an almost infinite number of applications possible.

Code No.

1147

Model

IR-310

Model

IM-301

Ultrasonic

Ring Type Attachment

ROTUS Air Motor Code No.

1004

Attachment is compatible with Emax EVOlution. System Chart Emax EVOlution Series / ROTUS Series (p.1-9~10)

Set-Up Drawing • Attachment (p.2-7~)

• Air Motor (p.2-6)

• Air Line Kit AL-H1207F (p.2-10)

• Compressor

Exclusive Tools

※ This air line kit is designed for use with the AFC-45 Foot Controller, Code No.1064.

General Parts

※ ROTUS

Exclusive Tools

A wide variety of tools A wide variety of NAKANISHI original tools are available to support processing along with products.

General Parts

Light-Weighted, Compact body NAKANISHI products are focused on high precision and high quality, pursuing ideal ease of use, lightweight and a compact size, as well as exquisite balance and good handling.

13 Types of Attachments Available

Ultrasonic

High-power and High-torque Equipped with an ultra-precision NAKANISHI special vane motor, this machine maintains a stable grinding process by maintaining the rotational speed even under fluctuating grinding loads.

0 0,0

Air System

Compatibility Compatible with a variety of attachments ideal for any application.

Electric System

Air System

-1

n mi

Air System

Electric System

Air System

Electric System

By attaching the silencer to the end of the exhaust air tubing, the motor operates extremely quietly.

Use Air Line Kit AL-H1207F or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator)

p.2-3

Order by Code No.

p.2-4

ROTUS Series ROTUS SERIES

ROTUS Series System Chart Model

1147

IR-310

Attachment

ROTUS Air Motor Standard Set 3,000~30,000 min-1

Ring Type

Lever Type

1016

6 mm Torque Type

MFC-300S 1/15 Speed Reducer RG-02 1010

MFC-300M

※ Can be connected between the motor and the attachment when a higher level of torque is required.

90° Mini Angle Type (Very Small Head)

1006

IC-300

By attaching the silencer to the end of the exhaust air tubing, the noise level can be reduced to an outstanding level. Twist-Free Joint mechanism is installed in the IM-301 to solve the problem of hose twisting.

ROTUS Air Motor (with Twist-Free Joint Mechanism) 100.9

2,000~30,000 min-1 90° Angle Type

Code No.

1004

Model

IM-301

Speed : Max. 30,000 min-1 (0.4 MPa) Proper Air Pressure : 0.3~0.45 MPa Air Consumption : 75 Nℓ / min Output Power : 46 W Max. Torque : 6.6 cN•m (0.4 MPa) Weight : 130 g (w/o hose)

KC-300 50° Angle Type

Standard Accessories

LS-100 Pistol-Type Polisher

• Air Motor with Hose 360˚ Twist-Free Joint Mechanism IM-301 3,000~30,000 min-1 1004

• Hose (K-206) : 2 m • Silencer (K-209) • Pin Wrench (K-233) : 1 pc.

4507

Code No.

AL-H1207F

Small-sized Handy Belt Sander

ROTUS-IR

Specifications (IR-310 + IM-301) ※ This air line kit is designed for use with the

Weight

AFC-45 Foot Controller, Code No.1064.

222g (

※

)

Max. Torque

Speed

Proper Air Pressure

Air Consumption

Output Power

Collet

6.6 cN·m

30,000 min-1

0.3~0.45 MPa

75 Nℓ/min

(Motor)

46 W

ø0.3~ø3.175 mm CHH Group (p.4-3)

(0.4 MPa)

Exclusive Tools

AFC-45

Exclusive Tools

Details of Maximum Allowable speed on intermittent use or continuous use p.2-7~10

Model

Standard Equipment • Air Grinder (IR-310+IM-301) : 1 pc. • Collet ø3.0mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each • Air Line Kit (AL-H1207F) : 1 pc. • Foot Controller (AFC-45) : 1 pc. • Accessories : Piping Hose 2m (K-275) : 1 pc., Lubricating Oil (K-211) : 1 pc. Wrench (7 x 5.1) : 1 pc., Pin Wrench (K-233) : 2 pcs. L Shaped Wrench (9) : 1 pc.

• Foot Controller

1064

1163

General Parts

Engraving and Ornament Processing Work Hammer

The Ring type IR-310 is a standard attachment for the ROTUS standard set ROTUS-IR.

General Parts

(Right to left motion)

Ultrasonic

• Air Line Kit

Pencil-Type Reciprocating Polishing Finisher Hammer Action Type HA-500 8060

(Speed)

The ROTUS System is a hand-held grinder with an energy saving air motor. Since it is an air driven system, there is virtually no heat generated to result in excellent durability. Select from a variety of attachments depending on the application.

Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER SLS-16 1380

-1

Ultrasonic

30,000 min

MINI-LUSTER ML-8 1307

7YV[LJ[P]L ,X\PW

The Twist-Free Joint mechanism will avoid hose twisting.

ROTUS Standard Set

(Reciprocating motion)

05+,?

Air System

Motor 1014

CAUTION

Electric System

1013

FINE BELT SANDER KBS-101 1146

p.2-5

CAUTION

Cooling system supresses heat for continuous operation. 90° Mini Angle Type

Air Driven

7YV[LJ[P]L ,X\PW

1012

(Reciprocating motion)

,?*3<:0=, ;663:

ON / OFF, FWD. / REV. Rotation Direction and Motor Speed can be controlled only by the Ring Switch. Foot controller is available (p. 2-10) : variable speed control.

1302

General Parts

05+,?

1/4 Speed Reducer RG-01 1009

Long Type

LUSTER

*(<;065

Ultrasonic ,_JS\ZP]L ;VVSZ

,_JS\ZP]L ;VVSZ Ultrasonic ,?*3<:0=, ;663:

13 types of attachments for all types of applications.

BMH-300

Air System

*(<;065

.,5,9(3 7(9;:

This high performance air motor with minimal power loss from load fluctuation has excellent performance in its grinding stability. Moreover, the motor with minimal air consumption runs quietly and the energy-saving mechanism makes it possible to operate with a 0.75KW (1hp) air compressor. Lightweight and compact design. 130 g (w/o hose)

CAUTION

96;<: 047<3:, 79,:;6

High performance air motor with high torque. The vane and cylinder, which are the result of NAKANISHI's ultra-precision machining expertise, minimize the decrease in rotational speed due to cutting load.

Electric System

.,5,9(3 7(9;:

(PY +YP]LU Electric System.LULYHS 7HY[ZAir System

96;<: 047<3:, 79,:;6

Extension Joint CN-01 1015

HG-200

,TH_,=6 ,:7,9;

1017

CAUTION

IH-300

ø22.8

,SLJ[YPJHSS` +YP]LU

,SLJ[YPJHSS` +YP]LU ,TH_,=6 ,:7,9;

1005

Speed Reducer · Extension Joint

Torque (cN·m)

Code No.

PRECISION HIGH TORQUE AIR MOTOR • STANDARD SET

※ Weight (w/o Hose)

Order by Code No.

p.2-6

ROTUS Series

1147

Code No.

IR-310

Model

1005

Model

IH-300

Code No.

Right to Left motion

1380

ø13.2

ø12.8

Model

93 Hammer Attachment Code No.

SLS-16

106.1

ø3.0 mm (CHH-3.0) ø2.35 mm (CHH-2.35)

Optional Collets : CHH Group are shown in page (p.4-3)

Standard Accessories

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc. • L Shaped Wrench (9) : 1 pc.

• Wrench (7 x 5.1) : 1 pc. • Pin Wrench (K-233) : 1 pc.

• Wrench (16 x 18), (20 x 24) : 1 pc. each • Allen Wrench (1.5 mm) : 1 pc. • Standard Accessories : 1 set

CAUTION

Weight : 92 g

Weight : 62 g

Standard Size Collet

Code No.

102

1017

BMH-300

Model

Code No.

1003

Weight : 210 g

Weight : 156 g Standard Size Collet

ø6.0 mm (CHG-6.0)

ø22.8

Optional Collets : CHM Group are shown in page (p.4-4) Standard Accessories

• Wrench (10 x 10) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Pin Wrench (K-233) : 1 pc.

• Wrench (7 x 5.1), (6 x 4.5) : 1 pc. each • Pin Wrench (K-233) : 1 pc.

90° Mini Angle Type Attachment Code No.

1012

Air Motor with Chip Air Mechanism Clean air is blown from the tip of the attachment to blow away cutting dust. The cooling effect reduces cutting heat and extends the life of the attachment.

This is only with the attachment IH-300.

MFC-300S

Model

For Chamfering Deep Hole, Bur Only ø1.6 mm 70.3

9.5

13.8

69.4

ø6.8

ø8.5

15,000 min Max. Please use it with Speed Reducer.

General Parts

15,000 min Max. Please use it with Speed Reducer.

-1

The smallest angle type attachment in NAKANISHI's lineup. Suitable for chamfering and deburring the inside of the slit pipe.

Suitable for chamfering and deburring the inside of the slit pipe. Minimum Inner Diameter : ø20 mm

p.5-31

Standard Size Collet

Exclusive Tools

p.5-31

ø1.6 mm (K-253) p.4-4

ø1.6 mm (K-252) p.4-4

Standard Accessories

• Collet Wrench (K-232) : 1 pc. • Pin Wrench (K-233) : 1 pc.

Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.

Interchangeable with attachments form the Emax EVOlution and ELECTER E-max system.

Order by Code No.

Exclusive Tools

Holding tool width : 11.9 mm Weight : 50 g Speed Reduction Ratio : 10/11

Exclusive Tools

Minimum Inner Diameter : ø13 mm Holding tool width : 7.2 mm Weight : 47 g Speed Reduction Ratio : 10/11 Standard Size Collet

• Hose (K-207) : 2 m • Silencer (K-209) • Pin Wrench (K-233) : 1 pc.

Optional Collets : CHG Group are shown in page (p.4-3)

For Chamfering Deep Hole, Bur Only ø1.6 mm

IM-300

Standard Accessories

ø3.0 mm (CHM-3.0)

MFC-300M

Model

Speed : 3,000~30,000 min-1 Proper Air Pressure : 0.3~0.45 MPa Air Consumption : 75 Nℓ / min Output Power : 46 W Max. Torque : 6.6 cN •m (0.4MPa) Weight : 130 g (w/o hose)

Standard Accessories

Model

Package

3 pcs./pack

CAUTION

Ultrasonic

1013

Code No.

65301

Ultrasonic

Code No.

(SUS-420, heat treated, approx, HRC50) 1 pc. each

CAUTION

Hammer Bit to be machined to required shapes

Air System

35,000 min-1 Max. This unique slim body makes it ideal for cutting and grinding the bottom surface of deep ribs or holes. The bur needs to be secured with a wrench.

Standard Size Collet

90° Mini Angle Type Attachment

Package

Air System

ø6.0 mm shank burs ready. The resistance produced by cutting and grinding is absorbed by a special rubber grip to eliminate slipping. The bur needs to be secured with a wrench.

Standard Accessories

• Wrench (7 x 5.5) : 1 pc. • Bar Wrench (K-212) : 1 pc. • Oil and Oil offer machine • Hammer Bit (For replacement) : 2 pcs.

97.5

ø13

ø25

120

30,000 min-1 Max. Please use it with Speed Reducer.

A wide variety of patterns can be produced by adjusting the spring pressure and hammer speed. Light weight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Weight : 95 g Self lubricating hammer mechanism ensure excellent durability. Stroke Range : 0.4 mm Stroke Times : 25~4,000 times/min Stroke Spring Pressure : 4.4~7.1 N (Ring Adjustment Type)

ROTUS Air Motor (with Chip Air Mechanism)

Tip diameter ø13 mm (For Deep Hole Grinding)

62.3

p.2-7

Description Ceramic Fiber Grindstone Holder Electroplated Diamond File 1.25 x 4 x 50 #100 Ceramic Fiber Grindstone 1 x 6 x 50 #1200

62510 62814 60520

Long Type Attachment

HG-200

Model

p.5-23~ 24

16,000 min-1 Max. Please use it with Speed Reducer.

Electric System

1016

Exclusive Tools

Standard Accessories

Code No.

HA-500

Electric System

6 mm Torque Type Attachment

Code No.

40,000 min-1 Max. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows for fine finishing of delicate parts. Lever Type one touch bur release.

Model

30,000 min-1 Max. High speed grinding and polishing operations can be performed while maintaining the fine and delicate feel of hand polishing. Lightweight pencil type design makes it easy to work in tight areas. Easily adjustable stroke length allows efficient work on minute areas or large sections. Weight : 127 g Stroke Range (variable) :0~1.6 mm Reciprocating Stroke (variable) : 0~7,650 times/min Max. tool shank diameter ø5.0 mm, Screw clamp type

40,000 min-1 Max. High precision and high reliability is realized by micron grade precision. Slim, lightweight design allows for fine finishing of delicate parts. One-touch ring type bur replacement.

8060

ø17.5

64.2

SWING-LUSTER Attachment

ø14

Code No.

Lever Type Attachment

ø14

Ring Type Attachment

p.2-8

ROTUS Series 90° Angle Attachment Code No.

1006

50° Angle Attachment Code No.

IC-300

Model

1014

57.3

Code No.

KC-300

Model

1146

Model

Code No.

KBS-101

4507

Model

AL-H1207F

185

20.2

Air Line Kit

61.9

ø1

ø12.8

FINE BELT SANDER Attachment

30,000 min-1 Max. Please use it with Speed Reducer.

Suitable for polishing a flat surface at speed with a grinding disk pad. Capable of applications for rough cutting to mirror finishing. Speed Reduction Ratio : 3/4

Perfect for finishing bottom surfaces and other tight, hard to reach areas. Suitable for polishing a flat surface at speed with a grinding disk pad. Speed Reduction Ratio : 3/4 Use the motor in reverse rotation for clockwise rotation.

Weight : 45 g

Standard Size Collet

Optional Collets : CHC Group are shown in page (p.4-3)

Standard Accessories

• Collet Wrench (K-231) : 1 pc. • Pin Wrench (K-233) : 1 pc. • Standard Accessories : 1 set

#180 #600 #180 #600 #180 #600

5 pcs./pack

Code No.

Stroke

(0.8 mm)

Package

1 pc./pack #180 #600 #180 #600 #180 #600

5 pcs./pack

1302

Code No.

LS-100

ø20

ø15

Exclusive Tools

Code No.

Description Spring Holder Ceramic Fiber Grindstone Holder Electroplated Diamond File 1.25 x 4 x 50 #100 Ceramic Fiber Grindstone 1 x 6 x 50 #1200

• Pin Wrench (K-233) : 1 pc.

1/15 Speed Reducer 42.8

Package

1 pc./pack

Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.

AFC-45

Code No.

1010

Model

RG-02

This Foot Controller is necessary for use with the AL-H1207F Air Line Kit. Designed to depress from any direction. Fine adjustment of speed control is possible.

Extension Joint Code No.

1015

Model

CN-01 50.1

56.1 ø18.9

p.5-13~ 18

Description Stone Holder Stone Holder Spring Holder Rectangular Pad Rod for Rectangular Pad Angle Rod Sand Paper Tip #120 Sand Paper Tip #320 Sand Paper Tip #600 Sand Paper Tip #1000

Model

Package

1 pc./pack

10 pcs./pack

Interchangeable with attachments form the Emax EVOlution and ELECTER E-max system.

30,000 min-1 Max. Mounted between an attachment and a motor. The speed is reduced to 1/15 while the torque is multiplied by 15 times. Suitable for high torque grinding process or drilling.

35,000 min-1 Max. Speed Ratio 1 : 1 This is a joint to be connected between a motor and an attachment to extend the total length of the attachment.

Weight : 93 g

Weight : 83 g

Standard Accessories

• Pin Wrench (K-233) : 1 pc.

Order by Code No.

Exclusive Tools

62751 62510 62814 60520

62502 62505 62751 62525 62526 62527 62552 62555 62557 62559

1064

Exclusive Tools

Standard Accessories

Code No.

Standard Accessories

p.5-19~ 22

30,000 min-1 Max. Mounted between an attachment and a motor. The speed is reduced to 1/4 while the torque is multiplied by 4 times. Suitable for high torque grinding process or drilling. Weight : 68 g

• Allen Wrench (2 mm), (3 mm) : 1 pc. each • Lubricating Oil • Lubrication Nozzle for LUSTER • Standard Accessories : 1 set Exclusive Tools

Code No.

General Parts

• Allen Wrench (1.5 mm) : 1 pc. • Standard Accessories : 1 set

Foot Controller

Standard Accessories

• Air Pressure Gauge • Air Regulator • Air Filter • Lubricator • Air Control Valve (CV-05) • Piping Hose (K-275) • Lubricating Oil (K-211)

Ultrasonic

Weight : 130 g Max. tool shank diameter ø3.5 mm, Screw clamp type

Standard Accessories

41.9

2 pcs. each

Filter Mesh : 5 µm

General Parts

25,000 min-1 Max. The pencil type grip is most suitable for polishing narrow grooves, details, etc. Stroke Range (Fixed) : 0.8 mm Reciprocating Stroke (Variable) : 0~6,380 times/min

Weight : 2.2 kg

RG-01

Model

Ensures a smooth operation and long life by supplying stable, conditioned air to the air motor. Three functions : air filter, regulator, mist lubricator can also be used to adjust motor speed.

Ultrasonic

1009

119

Reciprocating motion 85.4

Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt Abrasive Belt

Package

1/4 Speed Reducer

LUSTER Attachment (Pistol-Type Polisher) Model

64902 64904 64906 64912 64914 64916 64922 64924 64926

Description Width 4 mm #120 Width 4 mm #240 Width 4 mm #400 Width 6 mm #120 Width 6 mm #240 Width 6 mm #400 Width 8 mm #120 Width 8 mm #240 Width 8 mm #400

CAUTION

Air System

ML-8

64101 64102 64103 64203 64207 64213 64217 64223 64227

Code No.

Reciprocating motion

p.2-9

Standard Accessories

CAUTION

Air System

1307

Model

Code No.

This air line kit is designed for use with the AFC-45 Foot Controller, Code No.1064.

p.5-32

Electric System

1 pc./pack

Reciprocating MINI-LUSTER Attachment (Pencil-Type Polishing Finisher)

Code No.

Exclusive Tools

Standard Accessories

Package

• Allen Wrench (3 mm) : 1 pc. • Standard Accessories : 1 set

Electric System

64101 64102 64103 64203 64207 64213 64217 64223 64227

Standard Accessories

ø3.0 mm (CHC-3.0)

300(W) x 120(D) x 220(H) mm

p.5-25~ 30

ø3.0 mm (CHC-3.0)

Standard Accessories

Code No.

Standard Size Collet

Exclusive Tools

Belt Speed : 0~705 m/min Weight : 350 g Belt Sizes : 4, 6, 8 mm Wide × 300mm long

ø18.9

CAUTION

p.5-25~ 30

120

CAUTION

Exclusive Tools

30,000 min-1 Max. Very high belt speed, ideal for applications from deburring to finishing. The angle of the belt section is fully adjustable.

ø18.9

30,000 min-1 Max. Please use it with Speed Reducer.

p.2-10

IMPULSE Series

PRECISION PENCIL TYPE MICRO AIR GRINDER

IMPULSE Series

IMPULSE SERIES

60,000 min 40,000 min 23,000 min 23,000 min

-1

CAUTION

-1

NSP-601

NA45-400 (60˚) NA45-230 (60˚) NA90-230 (90˚)

CAUTION

Special Rotary Vane Air Motor A special rotary vane air motor is used at the heart of the handpiece. The motor prevents the decrease in RPM that may occur due to processing load and maintains a stable grinding process.

Twist Free Hose The grinder and dual hoses (air supply and exhaust) are not fixed, and the hoses swivel freely 360° without twisting. (IM-301) CAUTION

Exchangeable Collet

Electric System

Standard Size : ø3.0 mm (CHS-3.0) Optional Collets : CHS Group ø0.8~ø3.175 mm

CAUTION

ON / OFF Ring Easy to switch ON / OFF and to adjust the motor speed, turning right & left.

Built-in Air Filter Built in air filter in air inlet coupling (the connection to Air Line Kit).

• Air Line Kit AL-H1206 (p.2-15)

General Parts

Set-Up Drawing

• IMPULSE

• Air Supply 3 Pieces Set

Exclusive Tools

• Compressor • Silencer

Exclusive Tools

Excellent cost performance The Impulse series offers excellent features at a very reasonable price.

NSP-601

Ultrasonic

Outstanding noise reduction A silencer is attached to the end of exhaust hose as a standard.

Model

General Parts

High power and high torque NAKANISHI air motors are equipped with a special vane motor. The rotation speed is maintained even under fluctuating grinding loads, ensuring stable grinding.

1034

Ultrasonic

Precision and high accuracy The smooth rotation without runout or vibration even at high speeds makes it ideal for precise microfabrication.

0 ,00

Air System

Code No.

-1

Air System

Straight IMPULSE

Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator)

p.2-11

Order by Code No.

p.2-12

IMPULSE Series IMPULSE AIR GRINDER

IMPULSE AIR GRINDER

PRECISION AIR GRINDER

Straight / 60° IMPULSE

Super Cut IMPULSE Exclusive Tools

Straight IMPULSE

90° Super Cut IMPULSE

60,000 min

23,000 min

-1

CAUTION

p.5-25~30

-1

CAUTION Code No.

1034

Code No.

1036

Model

NSP-601

Model

NA90-230

Optional Collets : CHS Group are shown in page (p.4-4)

Standard Accessories Code No. Description Mounted Points 42423 Rubber Pad 64822 Cup Wheel 64836 Cup Wheel 64837 Sand Paper Disk ø31 #120 64222 Sand Paper Disk ø31 #320 64225 Sand Paper Disk ø31 #600 64227

ø3.0 mm (CHS-3.0)

The front part of the NSP-601 model is made of stainless steel ; the back portion of aluminum alloy.

Optional Collets : CHS Group are shown in page (p.4-4)

The safety design of clamping the chuck up to 29 mm maintains stable rotation of the cutting tool. The air motor is assembled with a special vane design which keeps constant speed under load providing stable grinding and polishing operation.

Disks

Model

NA45-230

Standard Size Collet

ø3.0 mm (CHS-3.0)

Angle model's housing are made of aluminum alloy.

Optional Collets : CHS Group are shown in page (p.4-4)

Ideal for removing sharp edges at corners and surfaces difficult to reach with straight type handpieces.

Exclusive Tools Standard Accessories Description Code No. Mounted Points 42423 Rubber Pad 64822 Cup Wheel 64836 Cup Wheel 64837 Sand Paper Disk ø31 #120 64222 Sand Paper Disk ø31 #320 64225 Sand Paper Disk ø31 #600 64227

: 165 Nℓ /min : 0.4~0.6 MPa : 1.5 m : 1.2 m

1034 1035

ø23.9

ø28.6

ø23.9

ℓ

39.6

d Weight

Speed

165 g

60,000 min-1

161

210 g

40,000 min-1

: 165 Nℓ /min : 0.4~0.6 MPa : 1.5 m : 1.2 m

L D

Standard Accessories • Grindstone Axis (NCH-01) : 1 pc. • Silencer (K-208) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 2 pcs. • Hose (K-213) : 1.5 m • Allen Wrench (1.5 mm) : 1 pc.

Please refer to next page.

p.5-25~30

Air Consumption Proper Air Pressure Inlet Air Hose Length Eraser Hose Length

168

2 pcs./pack

Collet

Code No.

ℓ

Weight

Speed

Collet

ø0.8~ø3.175 mm CHS Group (p.4-4)

1036 1037

ø33.5

ø23.9

156

190 g

23,000 min-1

ø33.5

ø23.9

39.6

163

190 g

23,000 min-1

ø0.8~ø3.175 mm CHS Group (p.4-4) Order by Code No.

Exclusive Tools

ø17

1 pc./pack

Exclusive Tools

Code No.

• With Mounted Point

Specifications

Standard Accessories • Collet ø3.0 mm (CHS-3.0) : 1 pc. • Mounted Point (42423) • Hose (K-213) : 1.5 m • Silencer (K-208) : 1 pc. • Wrench (8 x 5) : 1 pc. • Bar Wrench (K-212) : 1 pc.

• With Polishing Sander

General Parts

Air Consumption Proper Air Pressure Inlet Air Hose Length Eraser Hose Length

• With Rubber Pad

1 pc.

General Parts

Disks

Package

p.5-25~30

Ultrasonic

NA45-400

p.2-13

Ultrasonic

Model

Ultrasonic

1037

Specifications

Please refer to next page.

Code No.

Optional Collets : CHS Group are shown in page (p.4-4)

2 pcs./pack

-1

1035

ø3.0 mm (CHS-3.0)

1 pc./pack

p.5-25~30

23,000 min

Code No.

Standard Size Collet

• With Mounted Point

Air System

-1

• With Polishing Sander

60° Super Cut IMPULSE

40,000 min

• With Rubber Pad

1 pc.

Air System

60° IMPULSE

Package

p.5-25~ 30

CAUTION

Electric System

ø3.0 mm (CHS-3.0)

Exclusive Tools

Standard Size Collet

Straight type is ideal for high speed precision grinding.

Electric System

Standard Size Collet

CAUTION

p.2-14

IMPULSE Series The Exchangeable Attachment Chart Cup Wheel (Pre finishing)

Air Line Kit (Automatic Lubricating Device) Code No.

4506

Model

AL-H1206

Rubber Pad (Abrasive finishing)

Polishing Sander (Abrasive finishing)

Supplies a smooth air flow and automatic lubrication for long life and stable power.

Mounted Point (Grinding . Polishing)

Rubber Cup Wheel (Abrasive finishing)

By adjustment of auto lubrication and air flow, this will help extend the life of air grinder. Best for grinding and polishing processes, AL-H1206 Air Line Kit has a compact body with a carrying handle and holder to put the IMPULSE in.

Standard Accessories • Air Pressure Gauge • Air Regulator • Air Filter • Lubricator • Air ON-OFF Valve • Piping Hose (K-275) : 2 m • Lubricating Oil (K-211) : 1 pc.

Weight : 2.2 kg

Remove Head Cover

Filter Mesh : 5 µm

• Collet ø3.0

• Grindstone Arbor NCH-01 300(W) x 120(D) x 220(H) mm

Piping Connection Diagram CAUTION

CAUTION

Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator)

• Grindstone Arbor NCH-01

• Rubber Pad (64821, 64822)

• Cup Wheel • Polishing Sander • Rubber Cup Wheel

• Sand Paper Disk • Diamond Disk • Felt Disk

CHS Group (p.4-4)

• Mounted Point CAUTION

CAUTION

(p.5-25~30)

Coupler is not provided.

Attach and use various types of polishing discs. (Refer to p.5-25~30) ● The elasticity of the rubber makes it ideal for finishing flat to curved surfaces.

Oil Filler Cap Silencer Air Hose

To Air Compressor

5 per pack

Lubricator Oil Reservoir

Primary Joint Connector for Air Hose

ø30

ø20

Secondary Joint ø6 One-Touch Joint

ø11

Wheel height Overall height

Standard type

φ20・・・6 mm φ30・・・5 mm 10 mm

●

64821

64822

Model

1045

NCH-01

Head Cover

1043

CNA

IMPULSE

Hose 1.5 m

1038

K-213

IMPULSE

(for Cup Wheel & Rubber Pad)

Wrench 8 x 5

2012

Bar Wrench (72 mm)

2013

K-208

This is a sanding disc for high speed rotation with layered and bonded abrasive cloth. ● Compared to a grindstone, it has a softer bite for faster polishing. 23,000 min-1 ● The overlapping abrasive cloths provide a new abrasive surface, resulting in excellent durability. ●

ø30

Convenient Assorted set for trial polishing All grain sizes (5 types x 1 each) Total 5 pieces

IMPULSE IMPULSE

Code No.

K-212

IMPULSE IMPULSE Available in the market

5 per pack

ø6

1057

K-211

Lubricating Oil (1ℓ )

1058

K-202

2039

Grit

Wheel hardness

Code No.（φ20）

Standard

64830 64831 64832

#36 #46 #80 #80

Hard Standard Hard

For Air Line Kit AL-H1206

FJ-02

（For K-213 Hose）

# # # # #

80 120 180 240 400

Code No.（φ30）

薄ロングライフタイプ

ロングライフタイプ

Wheel height 7.5 mm Overall height 10 mm Ideal for tight spaces and detail works.

Wheel height 12 mm Overall height 14.5 mm 20% longer Wheel life than Standard type. ø30 5

Thin long-life type

ø30

64850

Long-life type

7.5

23,000 min-1 Max. Code No.

64842 64844 64846 64847 64849

64835 64836 64837 64838

M7 x 0.75

10 per pack 23,000 min Max.

10 per pack 23,000 min-1 Max.

-1

Grit

#36 #46 #80

Wheel hardness

Hard Hard Hard

Code No.

Grit

Wheel hardness

Code No.

64861 64862 64863

#36 #46 #80

Hard

64865 64866 64867

Hard Hard

Order by Code No.

Exclusive Tools

Lubricating Oil (70cc)

M7 x 0.75

Exclusive Tools

Grit

Filter Joint

M7 x 0.75

23,000 min-1 Max.

M7 x 0.75

Allen Wrench (1.5 mm)

(for φ6 Quick Disconnecting Joint)

12 per pack

General Parts

1061

IMPULSE

64822

General Parts

Silencer Small (w/Metal Fittings)

Fit to

Ultrasonic

Code No.

Grindstone Arbor

M7 x 0.75

Flap Sanding Disc Description

64822

Code No.

Ultrasonic

Product

M7 x 0.75

Code No.

Air System

64821

Air Tool

Air System

A highly elastic grinding wheel with both grinding and polishing capabilities. It makes the most out of the high power of IMPULSE to machine flat and curved surfaces with high efficiency and softness. ● Compared with grinding wheels, there is no bite and the roughness of the ø30 finished surface can be finely adjusted. ● The use of a special bonding agent reduces clogging and allows the ø11 processing of a wide range of materials including general steel, aluminium, copper, brass and castings. ø20 ø30 ●

2.8

IMPULSE Series Spare Parts

ø6

23,000 min-1 Max.

23,000 min-1

Tool Holder

IMPULSE

p.2-15

Cup Wheel

●

Electric System

Rubber Pad

Exhaust Air / Oil Hose

ON-OFF Valve

Filter Regulator

Electric System

Supply Air / Oil Hose Filter Joint

Adjusting Dome

p.2-16

IMPULSE Series

PRESTO II PRESTO II AIR TURBINE GRINDER

Rubber Cup Wheel

ULTRA-HIGH SPEED AIR TURBINE GRINDER

ø30

M7 × 0.75

CAUTION

10 per pack Grit

# 60 # 80 # 120 # 180 # 220 # 320

23,000 min-1 Max. Color

Code No.

Brown Red Blue Olive Green Brown

64851 64852 64853 64854 64855 64856

Convenient Assorted set for trial polishing All grain sizes (6 types x 2 each) Total 12 pieces Code No.

64859

Welded Diamond Cup Wheel

ø1.6 mm Bur Only

An astonishing 320,000 rpm. Smooth cutting without any resistance enables precise cutting and processing. Clean cutting is possible with the oilless air grinder. No oil sprays out to prevent the workpieces and hands from getting dirty. Lightweight aluminum body (71 g) with a palm-sized overall length (109 mm). Highprecision processing of minute parts is possible at the same touch when holding a ball-point pen.

PRII-304S

Standard Equipment

Specifications

• Presto Handpiece (PR-304) : 1 pc. • Air Line Kit (PRII-06) : 1 pc. • Foot Controller (AFC-40) : 1 pc. • Handpiece Holder (Z014) : 1 pc.

Rotating Speed Proper Air Pressure Air Consumption Inside Diameter Filter Mesh

320,000 min

108.6

-1

Code No.

1122

Model

PR-304

One-touch ring type bur replacement

Built-in dust protection mechanism developed by NAKANISHI ensures long durability.

• 2 m Hose

Chip air blows away the cutting powder and cools the cutting tool.

Grit

Code No.

#60/#80

64871

Flexible tubing ensures excellent workability reducing fatigue to the operator's hand for long continuous use.

Ultrasonic

Ultra-high speed no lube air turbine handpiece ideal for delicate processing application.

Standard Accessories

1 per pack

M7 × 0.75

CAUTION

Air System

PRESTO Handpiece

Weight : 71 g (w/o Hose)

Overall height 13 mm

: 320,000 min-1 : 0.25 MPa : 40 Nℓ/min : ø1.6 mm Bur Only : 5 µm

Ultrasonic

Model

CAUTION

Electric System

<Applications> Suitable for grinding cast irons, castings, hard rubbers, FRP, stones, concretes and hard materials.

1125

Air System

<6 Key Features> Cost saving and ecological benefits ① Significantly reduced dust generation and improved working environment. Generally, resinoid wheels generate a lot of dust due to their own wear and tear. This wheel does not generate any dust from itself. ② The large protrusion of diamond abrasive grains gives a sharp cutting edge and a much better cutting power. ③ The special welding method ensures strong diamond grain retention and excellent durability. ④ Greatly reduced sparks and odours during grinding. ⑤ No wear of the wheel itself and no change in the wheel's rim speed, resulting in a uniform surface. ⑥ Longer wheel life, less tool changes and less wasted machining time.

Code No.

Electric System

Diamond abrasive grains are welded to the surface of the cup-shaped base under vacuum and high temperature conditions using a special alloy.

320,000 min-1

PRESTO II Standard Set

NA90-230

23,000min -1 ø30

PRESTO II

ø15.6

Highly elastic rubber grinding wheel with both grinding and polishing properties. Highly efficient machining of flat and curved surfaces with a soft touch utilizing the high power of IMPULSE. Compared with grinding wheels, the impulse wheel does not bite and allows fine adjustment of roughness of finished surfaces. The use of a special bonding agent reduces clogging and enables machining of a wide range of materials, including general steel, aluminum, copper, brass, and castings.

PRESTO II Spare Parts

1126

PRII-06

PRESTO II Cartridge

1120

PR-03

Foot Controller

1124

AFC-40

Piping Hose (ø6.0) 2 m Long

2041

K-237

Air Turbine Hose (ø5.1) 2 m Long

2042

K-238

Pin Wrench

2002

T-751

PRESTO II Air Line Kit (w/o Lubricator / Filter Mesh 5 µm)

Enlarged photo of abrasive grains

ø1.6 mm tools for PRESTO II

Electroplated Diamond Burs

Carbide Cutters

Mounted Points

Rubberized Abrasives

Order by Code No.

Exclusive Tools

Model

Exclusive Tools

Code No.

General Parts

Description / Specifications

General Parts

General Parts p.2-17

Product

p.2-18

Ultrasonic System Products INDEX CAUTION

CAUTION

Features ............................................................................ p.3-3~4 Set Products ......................................................................... p.3-5

Electric System

Series

CAUTION

Controllers / Handpiece / Parts ........................................... p.3-6

Set Products ......................................................................... p.3-9 Controllers / Handpiece / Parts ......................................... p.3-10

General Parts

Features ............................................................................ p.3-7~8

Ultrasonic

Series

Air System

Ultrasonic

Air System

Ultrasonic

Air System

Ultrasonic Polisher

Ultrasonic Cutter

Order by Code No.

Exclusive Tools

Exclusive Tools p.3-1

p.3-2

Sheenus ZERO

"ZERO magic" Achieve ZERO burden in polishing operations

Series

Ultrasonic Polisher

High-speed polishing system using ultrasonic vibrations of 19,000 to 29,000 times per second with a maximum amplitude of 40 μm. Vibration is not conveyed to the hand, and safety is further improved with high efficiency through circuit optimization and a heat generation protection function. Improved visibility

CAUTION

General Parts Exclusive Tools

■ High-frequency noise is reduced by a sine wave drive.

Ultrasonic

■ Adapted the worldwide power supply, 100 - 240V

Sheenus ZERO automatically suppresses the output and keeps the temperatures from rising to allow for continuous use.

Air System

The weight of the controller has been reduced by 29 % compared to the previous model. (SHEENUS neo : 2.1 kg → Sheenus ZERO : 1.5 kg) Allows ease to carry around.

Heat protection function

CAUTION

Electric System

Exclusive Tools

Light weight

Transmission efficiency has been improved by 16 % at maximum compared to the previous model.

Exclusive Tools

General Parts

Exclusive Tools

Rated power consumption is reduced by 13 % compared to the previous model. (SHEENUS neo : 31 W → Sheenus ZERO : 27 W)

High efficiency power

General Parts

Ultrasonic

General Parts

Improved energy savings

Ultrasonic

Air System

Ultrasonic

Air System

Electric System

Air System

LED

CAUTION

Electric System

Electric System p.3-3

The digital LED display on the controller clearly shows the status of the operating function. The Blue LED on the handpiece will indicate whether the power is ON or OFF.

p.3-4

Sheenus ZERO

ULTRASONIC POLISHER

SERIES

Set ●

● ●

Sheenus ZERO can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. This tool quickly removes hard layers of EDM deposits and polishes difficult areas such as complex corners and ribs. Capabilities include deburring, grinding and polishing of precision molds, dies electronic and ceramic components.

Sheenus ZERO Controller ● ●

●

Powerful Max. output power is 45 W. Digital Display The LED display can be switched between the amplitude and WATT. Safety The heat protection function can be set to detect abnormal heat.

Specifications

Indicator (Display the amplitude, WATT and ERROR)

Handpiece can be placed on the controller.

UP key / DOWN key ERROR / WATT ON / OFF key (Start and stop the handpiece)

●Spare fuse (T1.6AH 250V) : 2 pcs. ●Main power cord (2 m) : 1 pc. (Plug type: 120V or 230V)

Main power switch

CLAMP key UNCLAMP key

Model

Sheenus ZERO CONTROLLER 120V

Code No.

7779

Model

Sheenus ZERO CONTROLLER 230V

※Adapted the worldwide power supply, 100 - 240V. Please choose the plug type of main power cord.

Sheenus ZERO is not compatible with SHEENUS neo.

Sheenus ZERO Handpiece Exclusive Tools

p.5-5~ 12

Specifications Oscillator : PZT piezoelectric type Attachment fixing: M6 x P0.9 screw Cord length : 3 m Dimensions : Max. ø 28 x L 134 mm Weight : 140 g (excluding cable) Exclusive Tools

Model

US-50P Set 120V

Code No.

7776

Model

US-50P Set 230V

※Adapted the worldwide power supply, 100 - 240V. Please choose the plug type of main power cord.

7780

Model

US-50P

※Tip holder and ceramic fiber grindstone in this picture are not provided when only handpiece is purchased. NAKANISHI genuine tools are highly recommended.

Sheenus ZERO is not compatible with SHEENUS neo.

Sheenus ZERO Spare Parts

Standard equipment

Product

Code No.

8103

Description FC-24 Foot switch (ON / OFF switch only) Wrench 10 mm Available in the market Hexagon wrench 2.5 mm Available in the market

Order by Code No.

Exclusive Tools

●Tools : 1set #60101 Electroplated diamond file (#200, Flat taper, 4 x 50 mm, t=0.4) : 1 pc. #60519 Ceramic fiber grindstone (#800, Flat, 6 x 50 mm, t=1.0) : 1 pc. #60902 Tip holder (For round, ø 3.0 tip) : 1 pc. #60922 Tip holder (For flat, t=1.0 tip) : 1 pc.

Exclusive Tools

●Controller : 1 pc. ●Handpiece : 1 pc. ●Tool box (Plastic) : 1 pc. ●Wrench (10 mm) : 2 pcs. ●Hexagon wrench (2.5 mm) : 1 pc. ●Foot switch (FC-24) : 1 pc. ●Spare fuse (T1.6AH 250V) : 2 pcs. ●Main power cord (2 m) : 1 pc. (Plug type : 120V or 230V)

Code No.

General Parts

7775

134

p.5-5~ 12

General Parts

Code No.

Ultrasonic

Comfortable Usability Light weight, ergonomically designed resin body enables effortless, precision work over long periods of time. Easy Tool Installation Easy tool installation using wrenches.

Ultrasonic

●

Air System

7778

Air System

Code No.

CAUTION

Electric System

Power level indicator

Standard accessories

●

p.3-5

CAUTION

Electric System

Oscillation frequency : 19 kHz - 29 kHz Frequency control: Auto-tracking system Outputs : 45 W (max.) UNCLAMP mode 20 W (max.) CLAMP mode Output adjustment : 21 steps variable Rated input : AC 100 - 240V Rated power consumption : 27W Dimensions : W161 x D256 x H84 mm Weight : 1.5 kg

CAUTION

∅28

CAUTION

p.3-6

Sonic Cutter ZERO

"ZERO Stress" Complex shapes can be created as desired.

Series Sonic Cutter ZERO is a high performance cutter applying ultrasonic vibration at a rate of 38,000 - 40,000 times per second. The easy to maneuver razor sharp cutting edge enables delicate work even on complicated shaped objects. Ultrasonic vibration provides a sleek and precise finish. Improved visibility CAUTION

CAUTION

General Parts

Sonic Cutter

Order by Code No.

Exclusive Tools

■ Adapted the worldwide power supply, 100 - 240V

Sonic Cutter ZERO

Exclusive Tools

The overheat protection function enables continuous use. When a specified temperature is detected, the output will be automatically adjusted to suppress the temperature from rising. If the excessive heat is detected, the controller will stop operating for safety.

Ultrasonic

Overheat protection function

Air System

Improvements in the transducer achieved a lower heat level by 28.6 degrees Celsius maximum compared to the previous model.

CAUTION

Electric System

General Parts

The weight of the controller has been reduced by 46 % compared to the previous model. (Sonic Cutter: 2.6 kg → Sonic Cutter ZERO : 1.4 kg)

Reduction of heat level in handpiece

General Parts

Ultrasonic

General Parts

Lighter weight

Ultrasonic

Air System

Ultrasonic

LED

Air System

Electric System

Air System

Electric System

Electric System p.3-7

CAUTION

The digital LED display on the controller clearly shows the status of the operating function. The Green LED on the handpiece will indicate whether the power is ON or OFF.

p.3-8

Sonic Cutter ZERO

ULTRA-SONIC CUTTER

SERIES

Set ● ● ●

Especially effective for cutting complicated and precise shaping. (For cutting fabrics, latex, films, plastics, urethanes and PCB pattern retouching, etc.) Efficient for cutting, clipping and deburring of various thin materials. An accurate and sharp cut can be ensured as there are no annoying vibrations felt on the handpiece.

Sonic Cutter ZERO Controller ● ● ● ●

Oscilation frequency 38 kHz - 40 kHz and Max. output power 30 W achieves powerful cutting. A digital LED display indicates the watt and amplitude level clearly. LED display enhances visibility and prevention of misoperation. Heat protection function is equipped for a higher level of safety.

Specifications

D E F

Indicator (Display the amplitude, WATT and ERROR) UP key / DOWN key

●Spare fuse (T1.6AH 250V) : 2 pcs. ●Main power cord (2 m) : 1 pc. (Plug type : 120V or 230V)

ERROR / WATT ON / OFF key (Start and stop the handpiece) F Main power switch

Code No.

7785

Model

Sonic Cutter ZERO CONTROLLER 120V

Code No.

7786

Model

Sonic Cutter ZERO CONTROLLER 230V

Handpiece can be placed on the controller.

Sonic Cutter ZERO Handpiece

●

The vibration is not transmitted to the users' hand to enable a desired cutting result. Heat protection function enables continuous use without any concerns of overheating. Sonic Cutter ZERO handpiece performs sharp cutting and makes beautiful cutting surface.

Standard accessories

166

7782

Model

US-40C Set 120V

Code No.

7783

Model

US-40C Set 230V

※Adapted the worldwide power supply, 100 - 240V. Please choose the plug type of main power supply cord.

Sonic Cutter ZERO is not compatible with Sonic Cutter.

Sonic Cutter ZERO Spare Parts Product

Code No.

8103 BDC-200P

Description FC-24 Foot switch (ON / OFF switch only) Spare Blade Made by NT Incorporated Spare blade is available at a shop near you.

Order by Code No.

Exclusive Tools

Code No.

US-40C

Exclusive Tools

●Controller : 1 pc. ●Handpiece : 1 pc. ●Spare blades (BDC-200P 30°) : 40 pcs. ●Hexagon wrench (2 mm) : 2 pcs. ●Spare set screws (M4 x P0.7 x L4) : 4 pcs. ●Spare fuse (T1.6AH 250V) : 2 pcs. ●O-ring : 1 pc. ●Main power cord (2 m) : 1 pc. (Plug type: 120V or 230V)

Model

General Parts

Standard equipment

7787

General Parts

●Spare blades (BDC-200P 30°) : 40 pcs. ●Hexagon wrench (2 mm) : 2 pcs. ●Spare set screws (M4 x P0.7 x L4) : 4 pcs. ●O-ring : 1 pc. Code No.

Ultrasonic

LED

Oscillator : Bolt-clamped Langevin type Setting the blade: screwed the blade W4 mm x thickness 0.38 mm Length of cord : 3 m Dimensions : Max. ø 25 x L166 mm Weight : 120 g (excluding cable)

Ultrasonic

Specifications

Air System

Sonic Cutter ZERO is not compatible with Sonic Cutter.

Air System

※Adapted the worldwide power supply, 100 - 240V. Please choose the plug type of main power supply cord.

●

CAUTION

Electric System

Power level indicator

Standard accessories

●

p.3-9

CAUTION

Electric System

Oscillation frequency : 38 kHz - 40 kHz Frequency control : Auto-tracking system Outputs : 30 W Output adjustment : 21 steps variable Rated input : AC 100 - 240V Dimentions : W161 x D256 x H84 mm Weight : 1.4 kg

CAUTION

B C

∅25

CAUTION

p.3-10

General Parts INDEX CAUTION

CAUTION

Collets .......................................................................................... CHH K-253

Motors · Motor Cords · Power Supply Cords .......

Grindstone Arbor .................................................................... p.4-8

Oil ........................................................................................................... p.4-8

Silencers ......................................................................................... p.4-9 Protective Equipments ................................................... p.4-10

General Parts

Air Line Kits .................................................................................. p.4-8

Ultrasonic

Wrenches ....................................................................................... p.4-9

Air System Exclusive Tools

Exclusive Tools

PRESTO II · FINE BELT SANDER Parts .................. p.4-7

Exclusive Tools

General Parts

Exclusive Tools

Head Cover, Carbon Brush

General Parts

Ultrasonic

General Parts

Foot Pedals · Handpiece Stand etc. .............................. p.4-7

Ultrasonic

Air System

Ultrasonic

Air System

Air System p.4-1

p.4-5~6

CHM

Electric System

CHG K-252

Hoses · Filter Joints ............................................................. p.4-8 Electric System

Electric System

CHC CHS

p.4-3~4

CAUTION

p.4-2

<PARTS> COLLETS

CHG Group d

CHC Group

Fit to HG-200 · EHG-400 Code No.

CAUTION

Fit to BMH-300

Code No.

Model CHC-1.6 CHC-2.35 CHC-3.0 CHC-3.175

90416 90492 90430 90493

I.D. ø1.6 ø2.35 ø3.0 ø3.175

CHH Group d

Fit to MFC-300M Model CHM-1.0 CHM-1.6 CHM-2.0 CHM-2.35 CHM-3.0 CHM-3.175

I.D. ø1.0 ø1.6 ø2.0 ø2.35 ø3.0 ø3.175

Code No.

Model

I.D.

90016

K-253

ø1.6

CHS Group d

Code No.

Model CHS-0.8 CHS-0.9 CHS-1.0 CHS-1.1 CHS-1.2 CHS-1.3 CHS-1.4 CHS-1.5 CHS-1.6 CHS-1.7 CHS-1.8 CHS-1.9 CHS-2.0 CHS-2.1 CHS-2.2 CHS-2.3 CHS-2.35 CHS-2.4 CHS-2.5 CHS-2.6 CHS-2.7 CHS-2.8 CHS-2.9 CHS-3.0 CHS-3.175

I.D. ø0.8 ø0.9 ø1.0 ø1.1 ø1.2 ø1.3 ø1.4 ø1.5 ø1.6 ø1.7 ø1.8 ø1.9 ø2.0 ø2.1 ø2.2 ø2.3 ø2.35 ø2.4 ø2.5 ø2.6 ø2.7 ø2.8 ø2.9 ø3.0 ø3.175

ø1.6

12.7

Model

I.D.

90316

K-252

ø1.6

Order by Code No.

Exclusive Tools

Code No.

Exclusive Tools

Fit to MFC-300S

General Parts

K-252

Ultrasonic

90508 90509 90510 90511 90512 90513 90514 90515 90516 90517 90518 90519 90520 90521 90522 90523 90592 90524 90525 90526 90527 90528 90529 90530 90593

Air System

I.D. φ0.3 φ0.4 φ0.5 φ0.6 φ0.7 φ0.8 φ0.9 φ1.0 φ1.1 φ1.2 φ1.3 φ1.4 φ1.5 φ1.6 φ1.7 φ1.8 φ1.9 φ2.0 φ2.1 φ2.2 φ2.3 φ2.4 φ2.5 φ2.6 φ2.7 φ2.8 φ2.9 φ3.0 φ2.35 φ3.175

CAUTION

Electric System

General Parts

Fit to ERA-270 · IMPULSE SERIES

General Parts

Ultrasonic

General Parts

Model CHH-0.3 CHH-0.4 CHH-0.5 CHH-0.6 CHH-0.7 CHH-0.8 CHH-0.9 CHH-1.0 CHH-1.1 CHH-1.2 CHH-1.3 CHH-1.4 CHH-1.5 CHH-1.6 CHH-1.7 CHH-1.8 CHH-1.9 CHH-2.0 CHH-2.1 CHH-2.2 CHH-2.3 CHH-2.4 CHH-2.5 CHH-2.6 CHH-2.7 CHH-2.8 CHH-2.9 CHH-3.0 CHH-2.35 CHH-3.175

CAUTION

23.5

Ultrasonic

Air System

Ultrasonic

90603 90604 90605 90606 90607 90608 90609 90610 90611 90612 90613 90614 90615 90616 90617 90618 90619 90620 90621 90622 90623 90624 90625 90626 90627 90628 90629 90630 90692 90693

90910 90916 90920 90992 90930 90993

33.9

Fit to IH-300 · IR-310 · EHR-500 · EHR-401 · EHL-401 Code No.

Code No.

6.7

Air System

Electric System

Air System

I.D. φ0.5 φ0.6 φ0.7 φ0.8 φ0.9 φ1.0 φ1.1 φ1.2 φ1.3 φ1.4 φ1.5 φ1.6 φ1.7 φ1.8 φ1.9 φ2.0 φ2.1 φ2.2 φ2.3 φ2.4 φ2.5 φ2.6 φ2.7 φ2.8 φ2.9 φ3.0 φ3.1 φ3.2 φ3.3 φ3.4 φ3.5 φ3.6 φ3.7 φ3.8 φ3.9 φ4.0 φ4.1 φ4.2 φ4.3 φ4.4 φ4.5 φ4.6 φ4.7 φ4.8 φ4.9 φ5.0 φ5.1 φ5.2 φ5.3 φ5.4 φ5.5 φ5.6 φ5.7 φ5.8 φ5.9 φ6.0 φ0.73 φ2.35 φ3.175 φ4.76 φ6.35

ø1.6

34.4

Fit to IC-300 · KC-300 · EIC-300 · EKC-300 Model CHG-0.5 CHG-0.6 CHG-0.7 CHG-0.8 CHG-0.9 CHG-1.0 CHG-1.1 CHG-1.2 CHG-1.3 CHG-1.4 CHG-1.5 CHG-1.6 CHG-1.7 CHG-1.8 CHG-1.9 CHG-2.0 CHG-2.1 CHG-2.2 CHG-2.3 CHG-2.4 CHG-2.5 CHG-2.6 CHG-2.7 CHG-2.8 CHG-2.9 CHG-3.0 CHG-3.1 CHG-3.2 CHG-3.3 CHG-3.4 CHG-3.5 CHG-3.6 CHG-3.7 CHG-3.8 CHG-3.9 CHG-4.0 CHG-4.1 CHG-4.2 CHG-4.3 CHG-4.4 CHG-4.5 CHG-4.6 CHG-4.7 CHG-4.8 CHG-4.9 CHG-5.0 CHG-5.1 CHG-5.2 CHG-5.3 CHG-5.4 CHG-5.5 CHG-5.6 CHG-5.7 CHG-5.8 CHG-5.9 CHG-6.0 CHG-0.73 CHG-2.35 CHG-3.175 CHG-4.76 CHG-6.35

K-253

Electric System

Electric System p.4-3

91105 91106 91107 91108 91109 91110 91111 91112 91113 91114 91115 91116 91117 91118 91119 91120 91121 91122 91123 91124 91125 91126 91127 91128 91129 91130 91131 91132 91133 91134 91135 91136 91137 91138 91139 91140 91141 91142 91143 91144 91145 91146 91147 91148 91149 91150 91151 91152 91153 91154 91155 91156 91157 91158 91159 91160 91190 91192 91193 91194 91196

17.2

CHM Group

p.4-4

<PARTS> MOTORS · MOTOR CORDS

<PARTS> POWER SUPPLY CORDS Power Supply Cords

Motors Description

Product

Code No.

Model

Fit to

Plug Type

97 ø24.5

Standard Type Motor

8086

ENK-410S

For 100V

Emax EVOlution NE249

(A type)

108

ø28.4

Torque Type Motor

For 120V

8087

ENK-250T

(B type)

Emax EVOlution NE249

125

For 230V

119

(D type)

1483

NLS-110

Code No.

Model

8088

ENKCD-410S

ENK-410S (Standard Type Motor)

Blue

8089

ENKCD-250T

ENK-250T (Torque Type Motor)

Green

Code No.

Model

Standard Type Motor

8003

NK-351

ELECTER E-max NE129

Torque Type Motor

8012

NK-261

ELECTER E-max NE129

Code No.

Model

8004

NCL-351C

NK-351 (Standard Type Motor)

Blue

8013

NCL-261C

NK-261 (Torque Type Motor)

Green

8005

NCL-351S

NK-351 (Standard Type Motor)

Blue

8014

NCL-261S

NK-261 (Torque Type Motor)

Green

8051

NCL-EXT

ELECTER E-max Motor (All Kinds)

Description

Code No.

Model

Espert 500 Compact Motor Cord

9093

ENKCD-50C

ENK-500C

Espert 500 Torque Motor Cord

9094

ENKCD-50T

ENK-500T

LUSTER

Main Usable Area

For Japan For U.S.A. and Canada For Europe

Product

Fit to Controller

Code No.

Model

1484

K-269

8057

U403013

1485

U508013A001

Emax EVOlution

7728

U166A013A

ELECTER / ESPERT Sheenus ZERO / Sonic Cutter ZERO

1486

U508014A

7729

U260414

Emax EVOlution ELECTER / ESPERT Sheenus ZERO / Sonic Cutter ZERO

Emax EVOlution NE249

ø20

CAUTION

Motor Cords

CAUTION

Product

CAUTION

Description

Motors Description

CAUTION

Switch color

Electric System

ELECTER

Fit to

Electric System

Straight Cord : 1.5 m <with Switch>

Product

Fit to

ø24.5

φ24.5

ø28.4

Product

Description

Fit to

Switch color

Coiled Cord : 1.5 m <with Switch>

Straight Cord : 2 m <with Switch>

General Parts

Extension Straight Cord : 3 m

Ultrasonic

Motor Cords

Ultrasonic

ELECTER

Air System

φ24.5

Espert 500 Motor Cords

Order by Code No.

Exclusive Tools

Fit to

Exclusive Tools

Exclusive Tools p.4-5

Product

p.4-6

<PARTS> FOOT PEDALS · HANDPIECE STANDS ETC.

<PARTS> OIL · AIR LINE KITS · HOSES ETC.

Foot Pedals

Lubricating Oil

Product

Description

Code No.

Model

8106

FC-64

Foot Controller ON-OFF and speed change can be accomplished.

Foot Pedal ON-OFF and speed change can be accomplished.

1440

FC-40

Product

Fit to

Description

Lubricating Oil (70cc)

Controller Emax EVOlution NE249

Code No.

Model

1057

K-211

Fit to

Air Line Kit AL-H1206 · AL-H1207F

Lubricating Oil (1ℓ)

Controller ELECTER E-max NE129 · ESPERT 500 NE96

1058

K-202

Code No.

Model

4506

AL-H1206

4507

AL-H1207F

Air Line Kits Foot switch

8103

FC-24

Product

Sheenus ZERO · Sonic Cutter ZERO

Description

Air Line Kit

1064

AFC-45

ROTUS · Air Line Kit AL-H1207F

(ø6 joint / Filter Mesh 5 µm)

1124

AFC-40

PRESTO II PRII-06

Air Line Kit

Fit to

IMPULSE

Foot Controller

CAUTION

CAUTION Handpiece

(ø6 joint / Filter Mesh 5 µm)

Stand, Handpiece Holder & Head Cover

Product

Description

Fit to

Handpiece Stand

8104

K-274

Emax EVOlution · ELECTER E-max · SHEENUS neo ESPERT 500

Handpiece Holder

8107

K-273

Controller Emax EVOlution NE249

Head Cover

1043

CNA

Model

1424

E023011

IMPULSE

Fit to

NK-351 · NK-350 · NK-804T · NLS-100

PR-03

Product

PRESTO II

K-207

ROTUS IM-300

Hose 1.5 m

1038

K-213

IMPULSE

Hose for Piping 2 m (ø6.0)

2041

K-237

PRESTO II

Turbine Hose 2 m (ø5.1)

2042

K-238

PRESTO II

Hose for Piping 2 m with Metal Fitting

2070

K-275

For Air Line Kit

Description

Code No.

Model

2038

FJ-01

(For K-206 Hose) (For K-207 Hose)

Model

(for ø6 Quick Disconnecting Joint)

2039

FJ-02

(For K-213 Hose)

1103

TP-12A

FINE BELT SANDER KBS-101 · EBS-101

1104

TPA-12A

FINE BELT SANDER KBS-101 · EBS-101

Description

Code No.

Model

1045

NCH-01

Filter Joint ø6

ø6 Code No.

(for ø6 Quick Disconnecting Joint)

Fit to

Grindstone Arbor 29

Grindstone Arbor (for Cup Wheel & Rubber Pad)

Fit to IMPULSE

Order by Code No.

Exclusive Tools

Product

Exclusive Tools

Tension Pulley Assembly

2020

Filter Joint

71 Description

Hose 2 m (INLET, Chip Air Mechanism)

General Parts

Product

ROTUS IM-301

Filter Joints

ø6

1120

Fit to

FINE BELT SANDER Parts Tension Pulley

p.4-7

Model

K-206

General Parts

PRESTO II Cartridge

Code No.

ø4.6

Description

2027

Ultrasonic

NK-151 · NK-261 · NK-150 · ET II NK-260N

PRESTO II Parts Product

Hose 2 m (INLET)

Fit to

Ultrasonic

E037011

Model

Description

Carbon Brush

1425

Code No.

PRESTO II

Hoses Product

CAUTION

Air System

Code No.

PRII-06

Air System

Description

1126

(w/o Lubricator / Filter Mesh 5 µm)

Carbon Brushes (each 2 pcs.) Product

CAUTION

Electric System

Model

the AFC-45 foot controller, Code No.1064 (p.4-7).

Electric System

Code No.

PRESTO II Air Line Kit

ROTUS ※ This air line kit is designed for use with

p.4-8

<PARTS> WRENCHES · SILENCERS

Protective Equipments

Wrenches Product 27.7

Description

Code No.

Model

Fit to

Collet Wrench

2006

K-232

MFC-300S · MFC-300M

Collet Wrench

2007

K-231

IC-300 · KC-300 · EIC-300 · EKC-300

Always use safety glasses, mask, face guard for your safety.

Safety Eyewear 1

Wrench 4 x 7 (for K-231)

2068

IC-300 · KC-300 · EIC-300 · EKC-300

2013

Wrench 6 x 4.5

2001

BMH-300

Wrench 7 x 5.1

2009

IH-300 · IR-310 · BMH-300 · EHR-500 · EHR-401 EHL-401 · ERA-270

59.5

80 CAUTION

CAUTION

Bar Wrench (72 mm)

K-212

HG-200 · HA-500 · EHG-400 · IMPULSE

ERA-270 · IMPULSE

Wrench 10 x 10

2008

HG-200 · EHG-400

77.5

Goggles Type Code No.

69101

• Frame : Soft vinyl • Weight : 91 g

Code No.

Face Shield 1

Wrench 16 x 18 (Length 125 mm)

2047

SLS-16

Wrench 20 x 24 (Length 150 mm)

2018

SLS-16 · EIC-300 · EKC-300 · ERA-270 · ECN-011

Pin Wrench

2014

K-233

NK-351 · ENK-410S · IH-300 · IR-310 · HG-200 · BMH-300 MFC-300S · MFC-300M · IC-300 · KC-300 · RG-01 · RG-02 CN-01 · EHR-500 · EHL-401 · ERG-01B · ERG-01 · IM-301 · IM-300

Pin Wrench

2002

T-751

PRESTO II

Wrench with Handle (8 mm)

2016

K-248

Length : 104 mm

Wrench with Handle (10 mm)

2017

K-249

Length : 105 mm

L Shaped Wrench (9 mm)

2055

Allen Wrench (2 mm)※

NLS-110 · LS-100 · NLS-100 · ELS-100 · Sonic Cutter ZERO

• Lens : Acetate resin • Weight : 144 g

Code No.

69105

Code No.

69106

1Disposable Dust-proof Mask

Sheenus ZERO

Allen Wrench (3 mm)※

KBS-101 · NLS-110 · NLS-100 · LS-100 · ELS-100 · EBS-101 ※ Available

in the market

General Parts

Allen Wrench (2.5 mm)

General Parts

※

• Lens : Acrylic resin • Weight : 144 g

Ultrasonic

ML-8 · EML-8 · SLS-16 · IMPULSE

Flat surface Type Ultrasonic

Ultrasonic

Allen Wrench (1.5 mm)※

Curved surface Type

Air System

EHR-500 · IR-310 · IH-300

Sheenus ZERO

CAUTION

Wrench (10 mm)

CAUTION

69102

Electric System

2012

• Frame : Plastic • Weight : 43 g

Electric System

Wrench 8 x 5

Glasses Type

Silencers Product

Model

Fit to

Silencer Large (with Metal Fitting)

1060

K-209

ROTUS

Silencer Small (with Metal Fitting)

1061

K-208

IMPULSE

Dust-proof mask with exhaust valve Code No. Head-mounted type

69112

Ear-mounted type

69115

Order by Code No.

Exclusive Tools

Code No.

Exclusive Tools

Exclusive Tools p.4-9

Description

p.4-10

LINE UP

CAUTION

① Exclusive Tools for Ultrasonic Polisher "Sheenus ZERO"

② Exclusive Tools for Electromotive Polisher "LUSTER"

NAKANISHI Exclusive Tools

・・・・・・・・・・・・・・・・・・・・ ❶ Exclusive Tools for "Sheenus ZERO" ・

p.5-5〜12 CAUTION

CAUTION

❷ Exclusive Tools for "LUSTER" ・・・・・・・・・・・・・・・・・・・・・・・・・・・ p.5-13〜18

❹ Exclusive Tools for "SWING-LUSTER"・・・・・・・・・・・・・・・・・・・・ p.5-23〜24

Electric System

❸ Exclusive Tools for "MINI-LUSTER" ・・・・・・・・・・・・・・・・・・・・・・ p.5-19〜22

・・・ p.5-25〜30 ❺ Exclusive Tools for "ANGLE TYPE" ・・・・・・・・・・・・・・・・・・・ ⑤ Exclusive Tools for "ANGLE TYPE"

・・・・・・・・・・・・・・・・・・・・・ p.5-31 ❻ Exclusive Tools for "MINI-ANGLE TYPE"・・・・・・・・ p.5-32 ❼ Exclusive Tools for "FINE BELT SANDER"・・・・・・・・・・・・・

⑦ Exclusive Tools for "FINE BELT SANDER"

General Parts

Exclusive Tools

General Parts

Exclusive Tools

General Parts

General Parts p.5-1

Ultrasonic

⑥ Exclusive Tools for "MINI-ANGLE TYPE"

Air System

④ Exclusive Tools for Electromotive Polisher "SWING-LUSTER"

Air System

③ Exclusive Tools for Electromotive Polisher "MINI-LUSTER"

p.5-2

How to view NAKANISHI's Exclusive Tools How to view NAKANISHI's Exclusive Tools The pages are organized by code number, so you can ﬁnd the code number you need by checking the code numbers printed at the top of the left and right pages.

Actual size Illustration (excluding some tools and overall length) Shank diameter of the tools listed on the facing page The beginning of the Code Numbers listed on the facing page. (The last number listed is found on the right side.)

11131~

SHANK DIAMETER

Angle T Type Grinder (Electric / Pneumatic) Exclusive Tools T for “MINI ANGLE Type” T

SHANK S HANK DIAMETER DIA IAM METER

Indicates the shank diameter of various types of shafted tools.

NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

1.6

※ NAKANISHI micro grinders use a collet system to maintain high precision. Please prepare a collet that corresponds to each shank diameter.

Grit Size

CAUTION

Sand Belt

#180

30 pc./pack Circumference 300 mm

Machining metals

W=4mm W=6mm CAUTION

Grit

CAUTION

3 0˚ 30

19 1 9

20 2 0

11131

Zirconia Belta

21 2 1

11132

30 pc./pack Circumference 300 mm

11133

2.8

2.1

20 2 0

11152

11153

11154

11155

11156

pc./pack Hard type (circumference 300 mm) 320 Overall length

Code No. (Order Number)

Tools T To ols of ø1.6 mm shank

ҁ Excellent cutting performance enables high productivity and cost reductio ҁ ([FHOOHQW ZHDU resistance and durability, and stable finish machin surfaces can be maintained. ҁ 6XLWDEOH IRU KLJKO\ Hfficient machining of carbide, hardened steel, mold steel, special steel, ceramics, FRP, carbon fiber, glass, stone and difficult-to-machine materials. Hard type

Grit ● Assorted set 8 mm width All 5 Grit sizes (1 pcs. each) Total 5 pcs.

No.65019

# 120 # 240

P.5-31

Mounted Abrasive Points

Abrasive Rubber Points

No.65030

# 240 # 320

Code No.

65021

65022 65023 65024

Grit

# 400 # 600 # 800 # 1000

Code No.

65028 65025 65026 65027

For safety reasons, always wear protective equipment such as safety glasses.Use at or below the indicated maximum allowable speed.

Exclusive Tools

Note : Specifications may change without notice. The color of the tools in the catalog may differ from the actual color due to printing and other factors.

Exclusive Tools

Photograph of the basic shape

Carbide Burs

All 8 Grit sizes (1 pcs. each) Total 8 pcs.

# 180

65015 65017

# 600

Exclusive Tools

Diamond Burs

65012 65014

General Parts

● Assorted set 8 mm width

Code No.

General Parts

Exclusive Tools

Exclusive Tools T ols To

Grit # 120

65011

Soft type

3 pc./pack Soft type (circumference 300 mm)

Grit # 320

Code No.

General Parts

11151

1.8

4.4

Diamond Belt

ø5

# 120

64971

64972 64973

Ultrasonic

General Parts

Diamond abrasive grains

20 2 0

ø3

# 100

Code No.

Ultrasonic

2.7

ø5

Ultrasonic

ø3

Grit

Air Driven

No.64975

110˚

ー

64921 64922 ● 64923 ● 64924 CAUTION ● 64925 ● 64926 ● 64927 ● 64928 ●

Air System

All 3 Grit sizes (10 pcs. each) Total 30 pcs.

90˚

ø5

ー

● Assorted set 8 mm width

3320,000min 20,000 00m m inn --11

ø3

# 800

Code No. ●

ҁ ,GHDO IRU PDFKLQLQJ PHWDOV VXFK DV DOXPLQLXP VWDLQOHVV VWHHO, copper alloys and brass, which are prone to clogging. ҁ 7KHVH EHOWV Dre specially coated with zirconia abrasive grains to provide excellent durability for difficult-to-grind materials.

60˚

# 600

Air System

Air Driven

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering

ø1.6

General Parts

Exclusive Tools

p.5-3

30,000min -1

Ultrasonic

General Parts

※ The maximum allowable operating speed is for when the overhang is under 10 mm. If the overhang is more than 10 mm, please reduce the speed. For details, please refer to "Precautions for use" on page A-3~4. ※ Make sure there are no mechanical defects in the equipment prior to each use.

# 400 64906

W=8mm CAUTION

Electrically Driven

Electrically Driven Diamond abrasive grains

Air Driven

Ultrasonic

Do not exceed the maximum allowable speed. For safety reasons, always use below the indicated allowable speed. If this is the first time you are using the equipment or tip tool, start with a low speed and gradually increase it to reach the most appropriate speed for use. Conditions may var y depending on the t ype, shape, overall length, and wear condition of the tip tool, so please work with constant care.

# 320 64905

#140

Maximum Allowable Speed

# 240 64904

No.64931

No.64932

ø1.6

Quantity in Standard Package

ø4

64911 64912 64913 64914 64915 64916

# 180 64903

4 Grit sizes (10 pcs. each) Total 40 pcs. per pack

● Assorted set for Finishing (● mark)

ø3

80 64901

# 120 64902

● Assorted set for Pre Finishing (● mark)

4 Grit sizes (10 pcs. each) Total 40 pcs. per pack

ø2.5

Code No.

Electric System

#130

Code No.

Electric System

Maximum Allowable Speed Grit Size

320,000min 320 32 0,000m inn --11 CAUTION

Belt San

ҁ High quality Sanding Belt with excellent grindability and durability. ҁ +LJKO\ Hfficient grinding with a soft touch and less grain dropout even at high rim speeds.

ҁ ,GHDO IRU PDFKLQLQJ KDrdened steel, cemented carbide, ceramics, etc.

Electrically Driven

Air System

・Rough Finishing・・・・46, 54, 60, 70, 80, 90 ・Pre Finishing・・・・・・・100, 120, 150, 180 ・Middle Finishing・・・・220, 240, 280, 320, 400 ・Finishing ・・・・・・・・・・500, 600, 700, 800, 1000 ・Extra Fine to Mirror Finishes ・・・・・1200, 1500, 1800, 2000, 3000, 4000, 6000, 8000・・・

Powerful belt grinding power. A standard package is the minimum shipping unit. High-quality special belt for processing as desired. Fine This number shows and the compact numberNAKANISHI of pieces in the The precise, lightweight, Belt Sander functions at 100%. standard package (bag, box, etc.). Please order

the number of packages needed for the desired quantity.

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering

Electric System

This indicates the size (roughness) of the abrasive grains used in various types of polishing / grinding materials. The larger the number, the smaller (finer) the grit size, and conversely, the smaller the number, the larger (coarser) the grit size (roughness). This is the most significant factor that affects the roughness of the finished surface.

1pc./pack

MINI Angle Type T pe Ty

Diamond Burs for Deep Hole Chamfering (Mesh Size)

6502

Compact Handy Belt Sander ~ (Electric/Pneumatic) Quantity in Standard Package Exclusive Tools for “FINE BELT SANDER”

p.5-4

60101 ~

Exclusive Tools for Ultrasonic Polisher "Sheenus ZERO"

★ Suitable for finishing of high-hardness metals such as mold steel (removal of hardened electroplated layer, etc.) and heat treated metal. Also suitable for polishing of cemented carbide molds, aluminum molds, and copper alloy molds. ★ Ideal for grinding and polishing fine parts and rib slits of various molds for plastics, press, forging, headers, die-casting, etc. ★ It can be used for grinding and polishing ceramics, precision electronic parts, and precision mechanical parts. ★ It can handle a wide range of processing, from grinding of complex shapes and minute parts to mirror-polished finishes.

These tools are specially designed for NAKANISHI's Ultrasonic Polishing System to achieve the ideal finish with powerful sonic vibrations. A wide variety of tools are available to meet all kinds of processing situations. <Precautions for use> Select the CLAMP / UNCLAMP mode according to the tool you are using.

~60237 Ultrasonic Polisher

Sheenus ZERO

Electroplated Diamond File

CAUTION

1pc./pack

Electroplated Diamond File

The illustrations on this page are 90% of the actual size.

ø1

M6×P0.9

Round (tip-rounded)

M6×P0.9

Round (tip-rounded)

Electroplated Diamond File

The illustrations on this page are 90% of the actual size.

Thickness 0.8

M6×P0.9

4 19

Grit Size Code No. #200 60101 #320 60102 #600 60103

60181 60182 60183

#200 #320 #600

60185 60186 60187

#200 #320 #600

60191 60192 60193

#200 #320 #600

60231 60232 60233

#200 #320 #600

60235 60236 60237

M6×P0.9

Triangular Taper (triangular pyramid)

#200 #320 #600

Oval Taper

60105 60106 60107

M6×P0.9 3 17

Ultrasonic

M6×P0.9

Flat

Ultrasonic

1※

Round Taper (cone-shaped)

Air System

0.4

Flat Taper

Ultrasonic

#200 #320 #600

M6×P0.9

Air System

60155 60156 60157

※The diamond file part is brazed onto the holder, so the diamond file part cannot be replaced. ø3

1pc./pack

#200 #320 #600

CAUTION

Electric System

ø2

Grit Size Code No. #200 60151 #320 60152CAUTION #600 60153

Electric System

<Features> ● Diamond abrasive grains are electroplated to the file surface (electroplated coating). ● The electroplated type has the largest amount of protruding abrasive grains and offers excellent cutting performance. ● The life of the file is shorter than that of metal bonded files due to the single layer of diamond grains on the surface. ● It is suitable for processing ribs, corners, and holes because the shape of the file hardly changes. ● It is suitable for finishing of hard metal such as mold steel (removal of hardened electroplated layer, etc.) and heat treated metal. It is also suitable for polishing cemented carbide molds, aluminum and hard alloy molds. ● Suitable for grinding and polishing ceramics, precision electronic parts and precision mechanical parts.

※Thickness of 60107 is 0.8 mm.

#200 #320 #600

4 10

60111 60112 60113

Flat Long Taper

M6×P0.9

5 20

70 105

General Parts

Flat Bent

Thickness1.5

M6×P0.9

General Parts

45°

Flat Long 1

60 137

#200 #320 #600

60115 60116 60117

Flat Long Taper

M6×P0.9

8 20

70 105

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

Thickness1.5

M6×P0.9

Exclusive Tools

Exclusive Tools p.5-5

p.5-6 P.4

Tools for Ultrasonic Polisher （60911~） Exclusive "Sheenus ZERO" SHANK DIAMETER

（~62883）

Ultrasonic Polisher

Sheenus ZERO

<Precautions for use> Select the CLAMP / UNCLAMP mode according to the tool you are using.

Electroplated Diamond File

1pc./pack Electroplated Diamond File

Taper

0.3

Thickness 1.4

Electric System

Thickness 1.4

ø3

3 15 56

Thickness 1.4

Air System

ø3

15 56 1.5

ø3

3 20

Ultrasonic

1.25

Flat (Single Side Electroplated)

ø3

#400

62302

#600

62303

Thickness (t)

Grit Size

Code No.

0.5

#200

62801

0.4

#400

62802

0.35

#600

62803

Thickness (t)

Grit Size

Code No.

0.5

#200

62805

0.4

#400

62806

0.35

#600

62807

#150

62811

#200

62812

#400

62813

1.5

Half Round

1.2※

#150

62865

#200

62866

#400

62867

#150

62871

#200

62872

#400

62873

#150

62881

#200

62882

#400

62883

Diameter (d)

Code No.

ø2.0

60911

ø3.0

60912

ø3.2

60913

Half Round

ø3

4 20

Triangular

ø3

3 20 55

Special Tip Holder

M6×P0.9

Round

62814

ø3

#200

62816

#400

62817

#150

62821

#200

62822

#400

62823

20 55

Suitable for hard materials.

#150

62825

#200

62826

#400

62827

Highly efficient processing is realized by the tool which vibrates (longitudinal direction) at an ultrasonic speed of 22,500 times per second (22.5KHz). Unlike mechanical vibration, the amplitude is extremely small (40μ) and the operator does not feel the vibration.

About Exclusive Tools for Sheenus ZERO

Principle: Each tool has its own natural frequency. When the ultrasonic vibration frequency matches that of the tool, the tool resonates significantly. This resonant state is maintained in a stable manner and is used as a processing force. ※ As the ultrasonic vibration and tool's resonant frequency must synchronize, commercially

available NON-NAKANISHI genuine files and other abrasive tools may not properly vibrate.

Please note that the length, thickness, material, density, weight, shape, etc. of the tool will affect the results.

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

ø3

Attach various round bar type tips (lapping brass tips, electroplated diamond files).

Exclusive Tools

50 1.8

※ Thickness of 62815 is 1.4 mm.

55 1

62815

General Parts

5.5

#150

CAUTION

2 pcs./pack

#100

CAUTION

General Parts

General Parts p.5-7

Flat (Single Side Electroplated)

62847

Flat (Single Side Electroplated)

#400

ø3

Flat

62846

Ultrasonic

62301

2.6

Flat

#200

Air System

#200

Flat Taper

62845

Electric System

Code No.

ø3

#150

ø3

Electric System

Grit Size

Flat Taper

Code No.

Ultrasonic

CAUTION Flat

Round

Grit Size

1pc./pack Electroplated Diamond File CAUTION

ø2

Air System

<Features> ● Diamond abrasive grains are electroplated to the file surface (electroplated coating). ● The amount of protruding diamond grains is large, and the cutting performance is excellent. ● We use carefully selected diamond abrasive grains and electroplate them particularly strongly for machine finishing, so they have excellent durability. It has excellent durability. ● It is suitable for finishing of high-hardness metals such as mold steel, heat treated metal, cemented carbide, and ceramics, polishing and finishing of various molds, and deburring and correction of machine parts.

p.5-8

60511 ~

~60805

Exclusive Tools for Ultrasonic Polisher "Sheenus ZERO" These tools are specially designed for NAKANISHI's Ultrasonic Polishing System to achieve the ideal finish with powerful sonic vibrations. A wide variety of tools are available to meet all kinds of processing situations.

Ultrasonic Polisher

Sheenus ZERO

<Precautions for use> Select the CLAMP / UNCLAMP mode according to the tool you are using.

5 pcs./pack

Ceramic Fiber Grindstone Tip A ceramic fiber grindstone with both intensity and flexibility developed for finish polishing.

CAUTION

2 pcs./pack

※ Please clamp it to the special tip holder (sold separately). Refer to p.5-11.

Round

Diameter (d)

Code No.

ø2

60801

ø3

60802

40 2

Flat

60805

10 40

CAUTION

Ceramic Fiber Grindstone Tip 1

Color

Code No.

120

Violet

60511

60516

220

Brown

60512

60517

400

Orange

60513

60518

800

Blue

60514

60519

# 1200

Red

60515

60520

Grit Size #

Ultrasonic

Example of special tip holder installation

Ultrasonic

W=6 mm

Ultrasonic

W=4 mm

Thickness 1 mm

Air System

Flat

Round bar

※ Please clamp it to the special tip holder (sold separately). Refer to p.5-11.

Electric System

Flat bar

● This is a lapping tool for final finishing. ● Use with diamond compound or other abrasives. ● It is used to form according to the processing shape.

Electric System

<Features> ● Its softness and sharpness make it possible to perform finishing with a comfort, not possible with conventional grindstones. ● Its elasticity makes it difficult to break despite its thinness, and its good grip on the surface makes it easy to work with and use. ● It provides a smooth surface without scratches, and by sharpening the tip it performs excellently for polishing fine areas and slits.

Brass Lapping Tip

Example of special tip holder installation

Grit Size 50

Code No.

220

Gray

60551

300

Mazenta

60552

400

Orange

60553

600

Black

60554

800

Blue

60555

# 1000

White

60556

# 1200

Red

60557

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

Example of special tip holder installation

Color

General Parts

General Parts p.5-9

Diameter ø3

Round ø3

p.5-10

60901 ~

~60925 Ultrasonic Polisher

Sheenus ZERO

Special Tip Holder <Features> ● This is a special holder for installing various types of tool tips. Please select according to the size and shape of the tip. ● The power of the NAKANISHI "Sheenus ZERO" Ultrasonic Polishing System is efficiently transmitted to the tips.

CAUTION

※ Please be aware that NON-NAKANISHI genuine tools may not vibrate as required when mounted on the Sheenus ZERO due to the length, thickness, diameter, weight, specific gravity, and density of the tools.

CAUTION

Round

d 17

Attach various round bar tips (lapping brass tips, electroplated diamond files). Suitable for hard materials.

ø3.3

60903

ø3.2

60904

Diameter (d)

Code No.

ø2.0

60911

ø3.0

60912

ø3.2

60913

Thickness (t)

Code No.

0.8

60921

1.0

60922

2.0

60923

3.0

60924

3.3

60925 Exclusive Tools

Exclusive Tools

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

General Parts

Attach a flat ceramic fiber tip. Suitable for both hard and soft materials.

60902

M6×P0.9

Flat

ø3.0

Ultrasonic

Round

60901

Ultrasonic

M6×P0.9

ø2.0

Air System

4.5

Code No.

Air System

Attach round bar Ceramic Fiber tips. Suitable for soft materials.

Diameter (d)

CAUTION

Electric System

Special Tip Holder

M6×P0.9

p.5-11

Electric System

2 pcs./pack

CAUTION

p.5-12

62502 ~ SHANK DIAMETER

（~62751）

Handy Type Reciprocating Grinder (Electric / Pneumatic) Exclusive Tools for “LUSTER” Original tools that assist the LUSTER's powerful polishing ability to realize a speedy finish. We have a wide variety of tools for a wide range of processes from filing to mirror finish.

Handy Type (reciprocating)

Tools for LUSTER

3.2

1pc./pack

Grindstone Holder

Flat Tip Holder Attach the following Sandpaper and various polishing sheets.

Maximum clampable thickness 4.5 x width 11 mm

1pc./pack

Code No. Code No.

ø3.2

CAUTION

〔Stainless steel SUS 304〕

62502

62512 ø3.2

CAUTION

Code No.

ø3

1pc./pack

Square Pad Holder

62505

④

③

1pc./pack

Code No.

1.3

22.2

62508 Grindstone Holder Maximum clampable thickness 3 x width 6 mm

62526

③Angle Rod

62527

④Tool Holder with Spring

62751

Sandpaper

100pcs./pack

Please attach to a flat tip holder or rectangular pad holder.

ø3

ø12 7.2

Code No.

62507

62509

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Adhesive Back

Grit Size

Code No.

120

62552

320

62555

600

62557

# 1000

62559

Exclusive Tools

②Rod for Rectangular Pad

Exclusive Tools

23.4

62525

General Parts

62506

3.2

①Rectangular Pad

※ Parts can be ordered separately.

38 Code No.

ø3

Code No.

Parts

General Parts

1.3

Code No.

Maximum clampable thickness 1 x width 6 mm

ø11.5 6

ø13.4 10.2

1.3

① 8(L)×18(W)×6(H) mm

ø3

Ultrasonic

ø3

ø10 4

Maximum clampable thickness 1 x width 10 mm

Ultrasonic

② (Overall Length 120 mm・height 60 mm)

Maximum clampable thickness 1 x width 4 mm

62521

ø3

Ceramic Fiber Holder・Grindstone Holder

Air System

13.6

Air System

The holder for polishing tips is ideal for polishing the bottom of a box shape. The damper function allows the holder to continuously fit the work surface, and the angle can be freely adjusted to continuously capture the work surface for efficient polishing.

Electric System

Angle can be adjusted (90°)

p.5-13

Maximum clampable thickness 11 x width 13.5 mm

1pc./pack

CAUTION

p.5-14

62301 ~

Handy Type Reciprocating Grinder (Electric / Pneumatic) Exclusive Tools for “LUSTER”

SHANK DIAMETER

Original tools that assist the LUSTER's powerful polishing ability to realize a speedy finish. We have a wide variety of tools for a wide range of processes from filing to mirror finish.

1pc./pack

Electroplated Diamond File

CAUTION

0.3

Thickness 1.4

ø3

Thickness 1.4

Flat Taper

ø3

6 15

4.2

ø3

4.2

#400

62302

#600

62303

Thickness (t)

Grit Size

Code No.

0.45

#200

62305

0.4

#400

62306

0.35

#600

62307

#150

62311

#150

62313

#150

62315

#150

62317

<Features> ● This is a utility holder that allows files and various tools to fit the abrasive tip to the work surface by the spring damper function. ● The damper function absorbs all the vertical movement (flapping and bouncing) of the abrasive tool during reciprocating motion, enabling ideal reciprocating motion. ● This makes it possible to apply the grinding tool flatly to the work surface, resulting inCAUTION highly efficient even and smooth surfaces. ● Diamond files, various files, ceramic fiber grindstones (ø3 mm), various lapping sticks, various holders, etc. can be installed and used.

※Holdable shank diameter is ø1 to ø3.3 mm.

CAUTION

ø3 Code No.

62751 65

Ultrasonic

1.7

62301

Common Tools for LUSTER and MINI-LUSTER

Ultrasonic

Flat

#200

Tool Holder with Spring

Air System

Code No.

Tools for LUSTER

Air System

Grit Size

Handy Type (reciprocating)

Electric System

1pc./pack Electroplated Diamond File The illustrations on this page are 80% of the actual size.

~ 62751

Electric System

Flat Taper

● Suitable for finishing of high-hardness metals such as mold steel (removal of hardened electroplated layer, etc.) and heat treated metal. Also suitable for polishing of cemented carbide molds, aluminum molds, and copper alloy molds. ● Ideal for grinding and polishing fine parts and rib slits of various molds for plastics, press, forging, headers, die-casting, etc. ● It can be used for grinding and polishing ceramics, precision electronic parts, and precision mechanical parts. ● It can handle a wide range of processing, from grinding of complex shapes and minute parts to mirror-polished finishes.

45 90 2

ø3 45 90

ø3

Round

General Parts

Half Round

2.5

ø3

1 45 90

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

p.5-15

2.5

Exclusive Tools

Square

p.5-16

57301~ SHANK DIAMETER

~57410

Handy Type Reciprocating Grinder (Electric / Pneumatic) Exclusive Tools for “LUSTER”

Original tools that assist the LUSTER's power ful polishing ability to realize a speedy finish. We have a wide variety of tools for a wide range of processes from filing to mirror finish.

Handy Type (reciprocating)

Tools for LUSTER

Precision Finishing File (Flat, Round, Square, Triangular, Half-Round)

Coarse File for Plastic and Woodworking (Flat, Round, Square, Triangular, Half-Round)

<Features> ● Ideal for precision finishing of general steel, brass, copper alloy, hard resin, etc. ● Carefully selected materials and advanced grading technology provide superior sharpness and durability. ● Speedy finishing is possible by using the LUSTER series (Electric / Pneumatic). CAUTION

<Features> ● Ideal for filing wood products, plywood, compressed materials, and plastics. ● It is characterized by its superior sharpness and durability due to its advanced grading technology. ● It can be used with the Luster Series (Electric / Pneumatic) for speedy finishing.

CAUTION

3 pcs./pack

Flat

ø3

5.1

Triangular

ø3

57311

Flat 5.7

3.8

57302

57312

3.3

57303

57313

3.8

57304

57305

57315

No.57309

ø3

Triangular

ø3

Half Round

ø3

57403

57404

57405

5.7

Set of 5 types Precision Finishing File Fine-Grit Set

Coarse File Plastic and Woodworking Set

(No.57311〜No.57315 Contains 1 pc. each)

(No.57401〜No.57405 Contains 1 pc. each)

No.57319

No.57410 For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

(No.57301〜No.57305 Contains 1 pc. each)

Square

57402

Exclusive Tools

Set of 5 types Precision Finishing File Medium-Grit Set

ø3

General Parts

ø3

Round

57401

57314

2.3

Half Round

Code No.

ø3

General Parts

General Parts p.5-17

ø3

57301

2.2

Ultrasonic

Square

Code No.

Ultrasonic

3.3

ø3

Code No.

Overall length / 140 mm Filing area / 69 mm

Air System

2.5

Round

Fine-Grit

Air System

ø3

Medium-Grit

Electric System

Overall length / 140 mm, Filing area / 70 mm

Electric System

1.3

CAUTION

p.5-18

62506 ~ SHANK DIAMETER

Ceramic Fiber Holder・Grindstone Holder

1pc./pack

Maximum clampable thickness 1 x width 4 mm

22.2

Code No.

62506

62508

Grindstone Holder Maximum clampable thickness 3 x width 6 mm

Code No.

62507

62509

100pcs./pack

Sandpaper Adhesive Back

62510

18 8

50 1 w

Code No.

120

Violet

60511

60516

60521

220

Brown

60512

60517

60522

400

Orange

60513

60518

60523

800

Blue

60514

60519

60524

# 1200

Red

60515

60520

60525

320

62555

600

62557

# 1000

62559

Tool Holder with Spring

<Features> ● This is a utility holder that allows files and various tools to fit the abrasive tool to the work surface by the spring damper function. ● The damper function absorbs all the vertical movement (flapping and bouncing) of the abrasive tool during reciprocating motion, enabling ideal reciprocating motion. ● This makes it possible to apply the grinding tool flatly to the work surface, resulting in highly efficient, even and smooth surfaces. ● Diamond files, various files, ceramic fiber grindstone (φ3 mm), various lapping sticks, various holders, etc. can be installed and used. ※Holdable shank diameter is ø1 to ø3.3 mm.

ø3

Code No.

62751 65

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

General Parts

W=10 mm

62552

Exclusive Tools

Exclusive Tools p.5-19

Color

W=6 mm

120

General Parts

Grit Size

W=4 mm

Ultrasonic

1pc./pack

Ceramic Fiber Grindstone

Code No.

Ultrasonic

2 pcs./pack

Grit Size

Air System

Code No.

Air System

Please attach to a flat tip holder or rectangular pad holder.

ø3

Code No.

CAUTION

62982 50

3.2

23.4

CAUTION Code No.

Maximum clampable thickness 1 x width 6 mm

1.3

ø3.2

ø3

ø12 7.2

ø11.5 6

〔Stainless steel SUS 304〕

Electric System

ø3

23.4

Electric System

1.3

Flat Tip Holder ● A variety of polishing tips can be attached to MINI-LUSTER for efficient finish polishing. ● In addition to the polishing tips listed below, a wide range of cut polishing sheets (diamond film, felt sheets, etc.) can be used. ● The compact holder can be mounted on the pencil type MINI-LUSTER in a well balanced manner and is easy to use.

ø3

1.3

Maximum clampable thickness 1 x width 6 mm ø11.5 6

1pc./pack

ø13.4 10.2

CAUTION

Tools for MINI-LUSTER

Maximum clampable thickness 1 x width 10 mm

ø3

ø10 4

CAUTION

Pencil Type (reciprocating)

Designed to be easy to use, taking advantage of the features of the lightweight pencil type. The line-up of NAKANISHI's original tools is ideal for delicate and precise abrasive finishing.

3.2

1.3

（~62982）

Pencil Type Reciprocating Grinder (Electric / Pneumatic) Exclusive Tools for Polisher “MINI-LUSTER”

p.5-20

62801 ~

~62883

Pencil Type Reciprocating Grinder (Electric / Pneumatic) Exclusive Tools for Polisher “MINI-LUSTER”

SHANK DIAMETER

Pencil Type (reciprocating)

Designed to be easy to use, taking advantage of the features of the lightweight pencil type. The line-up of NAKANISHI's original tools is ideal for delicate and precise abrasive finishing.

Tools for MINI-LUSTER

Electroplated Diamond File

CAUTION

Flat Taper

Thickness 1.4

ø3

3 15 56

ø3

15 56 1.5

Flat

Grit Size

Code No.

0.5

#200

62801 62802

0.4

#400

0.35

#600

62803

0.5

#200

62805

0.4

#400

62806

0.35

#600

62807

#150

62811

#200

62812

#100

62813

15 50

ø3

Round

62815

#200

62816

ø3 15

Round taper

62840

#150

62841

#200

62842

#400

62843

#150

62845

#200

62846

#400

62847

#150

62851

#200

62852

#400

62853

#150

62855

#200

62856

CAUTION

62821

#200

62822

1.5

Half Round

62825

#200

62826

#400

62827

ø3

3 15

#400

62857

#150

62865

#200

62866

#400

62867

#150

62871

#200

62872

Half Round

ø3

4 20

#400

62873

#150

62881

#200

62882

62823

#150

ø1.5

ø0.5

2.6

Triangular

ø3

3 20 55

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

#400

62883

Exclusive Tools

ø3 20

#100

62817

#150 #400

1.8

ø3 20

※ Thickness of 62815 is 1.4 mm.

ø3

62833

General Parts

p.5-21

ø2

#400

Exclusive Tools

Flat (Single Side Electroplated)

#150 #400

62832

General Parts

Flat (Single Side Electroplated)

ø3

5.5

Round

62814

Flat

ø3

#200

Ultrasonic

ø3

1.2※

Round

ø1

Thickness (t)

#400

62831

Ultrasonic

Flat (Single Side Electroplated)

1.25

#150

ø3

Code No.

Air System

Flat Taper

Thickness 1.4

Square

Grit Size

Air System

Electric System

1pc./pack Electroplated Diamond File

Electric System

<Features> ● Diamond abrasive grains are electroplated to the file surface (electroplated coating). ● The amount of protruding diamond abrasive grains is large, and the cutting performance is excellent. ● We use carefully selected diamond abrasive grains and electroplate them particularly strongly for machine finishing, so they have excellent durability. ● It is suitable for finishing of high-hardness metals such as mold steel, heat treated metal, cemented carbide, and ceramics, polishing and finishing of various molds, and deburring and correction of machine parts.

p.5-22

（51123~） SHANK DIAMETER

The left-right horizontal swinging file swings around narrow areas (ribs), corners, grooves (runners), etc., which cannot be polished with a reciprocating file, to achieve speedy polishing.

Electroplated Diamond File

CAUTION

Flat Taper

Thickness 1.4

ø3

3 15 56

ø3

15 56 1.5

Flat

ø3

#200

62801

0.4

#400

62802

0.35

#600

50 1

#200

62805

0.4

#400

62806

0.35

#600

62807

#150

62811

#200

62812

#400

62813

#100

62814

Code No.

120

Violet

60516

220

Brown

60517

400

Orange

60518

800

Blue

60519

# 1200

Red

60520

With 6 mm wide flat tip CAUTION

ø3 mm

Grit Size

Round bar type 50 mm

62803

0.5

Color

ø3 50

1pc./pack

ø11.5

Color

Code No.

220

Gray

60551

300

Mazenta

60552

400

Orange

60553

600

Black

60554

800

Blue

60555

# 1000

White

60556

# 1200

Red

60557

With ø3 mm round bar

With sharpened tip of round bar

Ceramic Fiber Holder

Max. clampable thickness 1 mm x width 6 mm

ø3

Code No.

16 50

1.2※

62816

#400

62817

#150

62821

#200

62822

※ Thickness of 62815 is 1.4 mm. 55

ø3

3 15

#400 ø3

5 20 55

#150

62825

#200

62826

#400

Ceramic Fiber Brush The grindstone is now in brush form.

62823

50 1.8

1pc./pack

62827

Brush diameter

Brush length

Overall length

Finishing (Pink)

Middle Finishing (Red)

Rough Finishing (Blue)

ø2

52※

51123

51133

51141

※

51124

51134

51142

ø2.5

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

※Blue's overall length is 50 mm.

Exclusive Tools

p.5-23

#200

62510

Exclusive Tools

Flat (Single Side Electroplated)

62815

23.4

General Parts

Flat (Single Side Electroplated)

5.5

#150

1.3

General Parts

Flat

ø3

CAUTION

Ultrasonic

55 1.25

0.5

Grit Size

Ultrasonic

Code No.

Thickness 1 mm x width 6 mm

Air System

Flat Taper

Thickness 1.4

Grit Size

Flat type 50 mm

Air System

Thickness (t)

Ceramic Fiber Grindstone Tip

Electric System

Tools for SWING-LUSTER

Electric System

1pc./pack Electroplated Diamond File

Pencil Type (swing)

2 pcs./pack

Flat (Single Side Electroplated)

（~62827）

Pencil Type Swing Polisher (Electric / Pneumatic) Exclusive Tools for “SWING-LUSTER”

p.5-24

64101 ~ SHANK DIAMETER

~ 64274

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “Angle Type” NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

5 pcs./pack

Angle Type

100pcs./pack

Special Rubber Pads for Abrasive and Felt Discs

Sandpaper Discs (paper base type)

● It is used by attaching various types of polishing discs. ● The elasticity of the rubber makes it ideal for finishing flat and curved surfaces.

● Suitable for metal, woodwork, painted surfaces and putty polishing ● Use in dry conditions ø11

20,000min -1 CAUTION

ø21

CAUTION

ø10

ø20

CAUTION

ø11

64102

64103

100pcs./pack

Sandpaper Discs (fabric base type)

ø31

64111

64121

64141

64112

64142

120

64113

64122

180

64114

240

64115

64125

320

64116

400

64117

64126

600

64118

64123

64143

64124

64144

64127

64128

64145 64146 64147

64148

64202

180

64213

64222

64203

64212

240

64204

320

64215

64224

64205

64214

64225

400

64206

64216

64226

600

64207

64217

64223

64227

● These discs are specially coated with zirconia abrasive grains to provide excellent cutting performance and durability for difficult-to-machine materials. ● Ideal for machining metals such as aluminium, stainless steel, copper alloys and brass, which are prone to clogging.

ø21

ø31 ø11

Adhesive Back

Grit Size

ø11

ø21

ø31

64251

64261

64271

64252

120

64263

64272

64253

64262

64273

150

64254

64264

64274

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

120

Exclusive Tools

Exclusive Tools p.5-25

ø21

General Parts

ø31 ø11

ø11

64221

General Parts

Grit Size

64211

Ultrasonic

Adhesive Back

64201

Zirconia Disks

ø11

ø21

Ultrasonic

ø11

● Ideal for metalworking ● Excellent durability ● Use in dry conditions

Air System

100pcs./pack

ø31

Air System

64101

ø21

Electric System

ø11

Electric System

Grit Size

ø31 ø11

ø3.0

CAUTION

Adhesive Back

ø30

p.5-26

64331 ~ SHANK DIAMETER

20 pcs./pack

NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

Angle Type

5 pcs./pack

Felt Discs ø11

ø21

CAUTION

~64432

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “Angle Type”

Rubber grinding wheel disc with shaft (Integrated rubber pad) ● The newly developed special rubber holds the abrasive grains with the right amount of hardness and boasts exceptional polishing ability. ● The grinding wheel part is integrally moulded into the rubber pad for superior workability. ● Highly efficient finishing of flat and curved surfaces with a soft touch.

● Ideal for use in combination with various abrasives (diamond compound, polishing compound) for finish polishing. ● Made from 100% high quality sheep's wool, with moderate elasticity and sufficient durability for repeated polishing operations. ● High wool density ensures that abrasives and abrasive grains are held in place and the surface is polished.

CAUTION

Adhesive Back

Felt Discs (1 mm thick) Soft Felt Discs (2 mm thick) Soft

ø11

ø21

ø31

64331

64332

64333

64335

64336

Finish Polishing ø30

Pre Finishing ø30

64337

※ Sheeted types are available.

Grit Size

Color

Pink

Purple

120

WA abrasive grains GC abrasive grains

64411

ー

64412

64422

180

Yellow

64413

180

Green

ー

64423

220

Green

64414

64424

320

Purple

64415

64425

500

Orange

64416

500

Brown

ー

80 Black(Red line)

64431

120 Black(Blue line)

64432

ー

64426

Exclusive Tools

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

General Parts

Exclusive Tools

Blue

WA abrasive grains

Exclusive Tools

General Parts

Exclusive Tools

64421

Color

General Parts

ー

Grit Size

Ultrasonic

Pre Finishing (Excellent grindability)

Ultrasonic

Air System

Finish Polishing

Air System

ø3.0

CAUTION

Electric System

ø11

Product name

Electric System

Electric System p.5-27

ø31

CAUTION

15,000min -1

p.5-28

64451 ~

~64559

1pc./pack

ø21 CAUTION

3 pcs./pack

Diamond Discs (Full electroplated surface)

ø11

Resin Bond Diamond Discs Diamond abrasive grains are mixed with resin bond and coated on the resin base material.

The base material is an ultra-thin copper alloy, with diamond abrasive grains electroplated over the entire surface. ● The metal base material has good electrodeposition plating conditions and adheres diamond abrasive grains uniformly and most firmly. ● Very good sharpness and durability.

CAUTION

ø11

ø21

Adhesive Back

Grit Size

ø11

ø21

ø31

● The resin component provides a uniform and stable finished surface and a soft grinding feel. ※ This resin bond type requires dressing only for the first use. The cutting edges of the abrasive grains are exposed by lightly shaving the CAUTION surface with a grindstone or diamond file.

64471

ø11

140

64452

200

64463

64472

64453

64462

64473

280

64454

400

64465

64474

64455

64464

64475

600

64456

800

64457

64466

# 1000

64458

Adhesive Back

ø31 ø11

Grit Size

Air System

ø11

ø21

ø31

64531

64541

64551

120

64532

64542

64552

180

64533

64543

64553

64467

64476

64477

240

64534

64544

64554

64468

64478

400

64535

64545

64555

800

64537

64547

64557

# 1000

64538

64548

64558

# 2000

64539

64549

64559

※ Sheeted types are available.

Diamond Discs (Dot electroplated type for wet applications)

ø21

● The dot pattern is characterized by its strong grinding performance. ● Dot spaces allow chips and grinding fluid to flow smoothly. ● The resin base material is made of a fiber-filled resin that excels in flexibility and toughness.

Grit Size

Color

ø11

ø21

ø31

Green

64501

64511

64521

120

Black

64502

200

Red

64513

64522

64503

64512

400

Yellow

64504

64514

64524

800

Gray

64515

64525

※ Sheeted types are available.

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

Exclusive Tools

64505

64523

Exclusive Tools

General Parts

ø31 ø11

General Parts

Adhesive Back

Ultrasonic

Nickel alloy pellets with diamond electrodeposition are strongly bonded to the Resin base material.

Ultrasonic

ø11

Air System

64461

CAUTION

Electric System

64451

Air System

100

Air System

Electric System

ø31

1pc./pack

p.5-29

Angle Type

p.5-30

11131~

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “MINI ANGLE Type”

SHANK DIAMETER

Compact Handy Belt Sander (Electric / Pneumatic) Exclusive Tools for “FINE BELT SANDER”

NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

1.6

Powerful belt grinding power. High-quality special belt for processing as desired. The precise, lightweight, and compact NAKANISHI Belt Sander functions at 100%.

MINI Angle Type

Diamond Burs for Deep Hole Chamfering

Sand Belt 30 pcs./pack Circumference 300 mm

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering

For metal processing

● Assorted set for Pre Finishing (● mark) 4 Grit sizes (10 pcs. each)

320,000min -1

Diamond abrasive grains

Zirconia Belt

11132

30 pcs./pack Circumference 300 mm

11133

No.64975

2.8

2.1

11152

11153

11154

11155

11156

● Excellent cutting performance enables high productivity and cost reduction. ● Excellent wear resistance and durability, and stable finish machined surfaces can be maintained. ● Suitable for highly efficient machining of carbide, hardened steel, mold steel, special steel, ceramics, FRP, carbon fiber, glass, stone, and difficult-to-machine materials.

3 pcs./pack Hard type (circumference 300 mm)

Hard type ● Assorted set 8 mm width

All 5 Grit sizes (1 pc. each) Total 5 pcs.

No.65019

Tools of ø1.6 mm shank

Abrasive Rubber Points

# 240

# 320

# 600

65015 65017

Code No.

Grit Size

Code No.

65021

# 400

65011

65012 65014

Total 8 pcs.

No.65030

# 120 # 180

# 240 # 320

65022 65023 65024

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

# 600

# 800 # 1000

65028

65025 65026 65027

Exclusive Tools

Mounted Abrasive Points

# 120

Code No.

Exclusive Tools

Exclusive Tools p.5-31

All 8 Grit sizes (1 pc. each)

Carbide Burs

Grit Size ● Assorted set 8 mm width

Diamond Burs

Grit Size

Code No.

Soft type

3 pcs./pack Soft type (circumference 300 mm)

Grit Size

General Parts

11151

1.8

4.4

ø5

# 120

64972 64973

General Parts

Diamond abrasive grains

ø3

# 100

64971

Ultrasonic

ø1.6

ø5

Diamond Belt

Code No.

Ultrasonic

2.7

110˚

CAUTION

Air System

All 3 Grit sizes (10 pcs. each) Total 30 pcs.

90˚

ø3

ー

Grit Size

● Assorted set 8 mm width

#140

ø5

ー

● Ideal for machining metals such as aluminium, stainless steel, copper alloys and brass, which are prone to clogging. ● These belts are specially coated with zirconia abrasive grains to provide excellent durability for difficult-to-grind materials.

320,000min -1

ø3

ー

64921 64922 ● 64923 ● 64924 CAUTION ● 64925 ● 64926 ● 64927 ● 64928 ●

Air System

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering

60˚

# 800

ー

11131

# 600

No.64932

Code No. ●

Electric System

ø4

W=8 mm

Electric System

ø3

64911 64912 64913 64914 64915 64916

# 400 64906

Total 40 pcs. per pack

ø1.6

Code No.

# 320 64905

4 Grit sizes (10 pcs. each)

Code No.

80 64901

# 240 64904

● Assorted set for Finishing (● mark)

30˚

# 180 64903

No.64931

#130

ø2.5

W=6 mm

# 120 64902

Total 40 pcs. per pack

CAUTION

W=4 mm

Grit Size W

Fine Belt Sander

● High quality Sanding Belt with excellent grindability and durability. ● Highly efficient grinding with a soft touch and less grain dropout even at high rim speeds.

● Ideal for machining hardened steel, cemented carbide, ceramics, etc.

CAUTION

~65027

p.5-32

● CNC Lathes, Special Purpose Machines

NAKANISHI Solutions

● Machining Center

and Robot Automation Solution

Solution

● Cutting and Drilling PC Boards Solution ● Air Bearing Spindle Solution

Electric Motor Spindles

iSpeed3 Series

E4 0 0 0 S e r i e s

1,000 〜80,000 min Max.150 W 《 ø22・20・19.05 mm 》

1,000 〜40,000 min Max.1,200 W 《 ø40 mm 》

-1

Spindle

Electric System

Electric Motor

Controller

-1

E3000 Series 1,000 〜80,000 min Max.350 W 《 ø50・48・40・30・ 26.8・25・22・20 mm》 -1

E2000 Series 1,000 〜50,000 min Max.200 W 《 ø22.8 mm 》

-1

H ES S e r i e s 1,000 〜80,000 min -1 < With small drilling and milling >

・A great variety of spindles. ・MAX rotation 80,000 min-1 (E3000, iSpeed3)

MA X output power 1,200 W (E4000) ・Many parameters to set the delicate

cutting conditions.

Air-Speed

Air Motor Spindles Spindle

Air Motor

Air Line Kit

Compressor

Air-Speed

One Piece Type

Separate Type

1,500〜30,000 min -1 《ø25・23・20・19.05 mm》

1,000 〜30,000 min -1 《 ø30・25・22.8 mm 》

・A great variety of spindles ・MA X rotation 30,000 min -1

MA X output power 130 W. ・Excellent cost performance and

easy setup.

Air System

A i r Tu r b i n e S p i n d l e s Air Turbine Spindles

B-1

Air Line Kit

Xpeed Series

ABT Series

Max.160,000 min -1 《 ø65・40 mm 》

Max.160,000 min -1 《 ø40 mm 》

HTS Series

PL A N E T S e r i e s

150,000 min < With small and milling >

65,000 min -1 < Jig Ginder >

Bearing Type -1

Bearing Type

Compressor

B-2

Headquarters・Factory 700 Shimohinata, Kanuma, Tochigi 322-8666, Japan TEL：+81-289-64-3520／FAX：+81-289-62-1135 ※Specifications and design are subject to change without notice.

www.nakanishi-inc.com PR-K376E Ver.1 2022-06-14 05. Y

1110