INBOX

MAG STORE SYSTEM RANGE • 4” - Suitable for 10cm rig sticks • 6” - Suitable for 15cm rig sticks (can also accept 10cm

Rig Sticks) • 8” - Suitable for 30 & 38cm rig sticks (can also accept 10cm and 15cm Rig Sticks)

The InBox range has seen several new innovative additions over recent years, increasing the diversity and versatility of our InBox family. Our wide variety of InBox products which vary from hooklength storage, through to pole float winders covers lots of requirements and umpteen advantages to your fishing.

MAG STORE SYSTEM RIG STICKS

P0220006 10cm (4”) P0220007 15cm (6”) P0220008 30-38cm (12-15”) Additional Rig Sticks available in three sizes to fit into the Mag Store System Hooklength boxes.

10cm (4”) & 15cm (6”) 4 per pack 30-38cm (12-15”) 3 per pack

MAG STORE SYSTEM FEATURES • Waterproof rubber gasket • Ribbed Rig Stick for increased hooklength stability • Multi Rig Stick storage for improved versatility • Strong neodymium magnets • Dual identification slots • Impact resistant plastic case MAG STORE SYSTEM HOOKLENGTH BOXES

P0220001 10cm (4”) £14.99 / P0220002 15cm (6”) £17.99 / P0220003 30-38cm (12-15”) £19.99 The Mag Store System is the ultimate hooklength storage system and is available in three sizes to accommodate hooklengths from 4” through to 15”. The Mag Store System uses magnets to locate each individual Rig Stick in the system box (8-10 Rig Sticks supplied in each system depending on size), allowing you to swap and change their location within the box and add new Rig Sticks that contain different hooklengths. There are a whole host of features on the Mag Store System. A weatherproof rubber gasket helps to keep the inside of the box dry at all times, while the dual identification points make locating the correct box easy. The system is constructed from high grade materials from the impact resistant plastic casing through to stainless steel hinges.

MAG STORE SYSTEM HAIR RIGS & HOOKLENGTHS PAGE 164

MAG STORE SYSTEMS UNLOADED

P0220067 10cm (4”) £9.99 / P0220068 15cm (6”) £12.99 / P0220069 30-38cm (12-15”) £14.99 The Mag Store System is the ultimate hooklength storage system and is available in three sizes to accommodate hooklengths from 10cm through to 38cm. These Mag Store boxes are supplied unloaded and allow you to safely and securely store pre tied Mag Store hooklengths, each rig stick can be located in any of the set positions within the Mag Store Case. Mag Store pre-tied hooklengths can be purchased and added to the box in seconds. There are a whole host of features on the new Mag Store System. A weatherproof rubber gasket helps to keep the inside of the box dry at all times while the duel identification points make locating the correct box easy. The system is constructed from high grade materials from the impact resistant plastic casing through to stainless hinges.

ABSOLUTE ALL-ROUND HOOKLENGTH BOX

P0220073 £19.99 The Absolute All-Round Hooklength Box is ideal for storing large amounts of hooklengths from 3” (75mm) up to 9” (225mm). The capacity is huge with the box featuring long pegs that will accommodate up to 20 hooks. There are 20 available positions for longer hooklengths up to 9” and 40 positions if hooklengths are 3 or 4” long, meaning that up to 800 3 or 4” hooklengths can be stored. The gasket helps to prevent water from entering the box which is sealed by two clips and additional magnets on the sides. The box is constructed from an ultra-durable ABS plastic and has fixed pegs which are perfectly positioned and will not let you down. Each hooklength type can be clearly marked on the labels included.

REVALUTION STORAGE SYSTEM

P0220025 Revalution Storage System £24.99 P0220026 Revalution Spools (4 per pack) The Revalution Storage System is a spool system with a difference, EVA spools are the best way of storing long hooklengths but now pins are not required with the rotating plastic pin. There is an area on the spool for easy rig identification, displaying Rig length, line diameter as well as hook size and type. 21 spools are supplied in a storage box which has a semi-transparent lid, helping to eliminate light from the box. Stickers can be added to the inside of the lid for further spool identification.

REVALUTION RIGS PAGE 163

HARDCASE ACCESSORY BOX

P0220072 £9.99 Perfect for keeping a wide array of accessories safe and secure, from delicate pellet wagglers and pole floats through to feeders. The Hardcase Accessory Box is secured with two positive clips which in conjunction with the TPE gasket help to keep the contents of the box dry. The three sectioned divider supplied is ideal for separating out different styles of feeders or floats and can be removed entirely if required leaving a larger individual space.

HOOKLENGTH BOXES

P0220054 Short / P0220055 Long The Hooklength Boxes have doubled in capacity and allows you to securely store up to 10 different hook patterns/line diameter combinations in one hook box. In addition, there is an extra long peg which can be used to help tie the rig to the correct length. The Short Hooklength Box gives you the option to store 3’, 4’, 5’ and 6’ lengths, whilst the Long Hooklength Box allows you to store 6’, 8’, 10’ and 12’ lengths.

8 COMPARTMENT MAGNETIC HOOK BOXES

PMHB Featuring a strong magnet hidden in the base that holds your hooks securely and a smooth curved base to make their removal easy. Because the hooks never touch the magnet, corrosion is greatly reduced if the hooks get damp. The lids open individually and are waterproof. Each is colour-coded for easy recognition.

DOUBLE SLIDER WINDERS

P0020024 13cm Yellow / P0020015 18cm Red / P0020016 20cm Green P0020017 22cm Blue / P0020067 26cm Orange / P0020026 26cm Wide Purple Each Double Winder features two sliders so two rigs can be neatly stored on each winder. There is a slot for your hook and a peg which would hold a loop, meaning that rigs can be tied and hooklengths added at a later date if needed without kinking your line. The sliding anchor can be moved along the full length of the winder. There is a small retaining spike at both ends of the slider so it doesn’t matter which way you wind your rig on. The tapered ‘V’ hook holding slot can accommodate hooks as small as size 26 without damage.

10 per pack

INBOX WINDER TRAYS

P0020019 13cm Yellow / P0020020 18cm Red P0020029 26cm Orange / P0020030 26cm Wide Purple £11.99 Open trays filled with Double Slider Winders which fit in the drawers and units of Absolute, Inception and OnBox seatboxes.

13cm 20 per pack / 18cm 14 per pack / 26cm 9 per pack / 26cm 7 per pack

INBOX DOUBLE WINDER BOXES

P0020027 13cm Yellow / P0020028 18cm Red / P0020069 26cm Orange £11.99 Boxes filled with Double Slider Winders which fit in the shallow side drawers of the Absolute, Inception, Space Station and OnBox range enabling different rigs to be interchanged depending on requirements.