NEW PRODUCTS

New gateway enables communication through Ethernet network

ICP Australia is proud to introduce ICP DAS’s GW-2212i Modbus/TCP to RTU/ASCII gateway with two-port Ethernet switch and one-port isolatedRS-232.

The GW-2221i is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network and eliminates the cable length limitation of legacy serial communication devices.

The module can be used to create a pair-connection application (as well as serial-bridge or serial tunnel application), and can then route data over TCP/IP between two serial Modbus RTU/ASCII devices, which is useful when connecting mainframe computers, servers, or other serial devices that use Modbus RTU/ASCII protocols and do not themselves have Ethernet capability.

The GW-2212i module features a powerful 32-bit MCU to enable efficient handling of network traffic and also has a built-in web server that provides an intuitive web management interface that allows users to modify the configuration of the module, including the DHCP/Static IP, the gateway/mask settings and the serial port settings.

Key features:

• Supports Modbus TCP/UDP master and slave. • Supports Modbus RTU/ASCII master and slave. • Max. TCP connections (masters) per serial port: 32. • Read-cache ensures faster Modbus TCP/UDP response. • Supports UDP responder for device discovery (UDP Search). • Static IP or DHCP network configuration. • Easy firmware update via the Ethernet (BOOTP, TFTP). • Built-in web server (HTTP). • Two-port ethernet switch (LAN bypass) for daisy-chain wiring. • Includes redundant power inputs: PoE (IEEE 802.3af, Class 1)andDCsupply.

ICP Electronics Australia (02) 9457 6011 www.icp-australia.com.au

Backplane Systems Technology’s new network appliance is suitable for security applications

Backplane Systems Technology has released iBase’s INA7600 network appliance, which is based on two 3rd Gen Intel Xeon scalable processors (codenamed Ice Lake). The iBase INA7600 utilises Intel server-class XeonSP CPUs to provide unparalleled computing power, which is most suitable for carrier or enterprise-level network security applications, such as nextgeneration firewalls, IPS, DDoS, and DPI.

In addition, Intel’s QuickAssist Technology on the Intel Xeon-based platform enhances crypto and compression/decompression calculations through hardware acceleration.

The system has a modular design that allows customers to flexibly configure network ports to suit their requirements. It supports up to eight network modules to accommodate up to 64 GbE ports (with or without bypass) in copper or optical fibre cable. To achieve high availability, the INA7600 is equipped with redundant power supplies and four hotswappable fans. An optional IPMI 2.0 module provides direct access to server management functions and remote monitoring capabilities.

The INA7600 is available in two variants: INA7600-NIC and INA7600SHQ, supporting a maximum of 66GbE ports and 34 GbE ports respectively. Measuring 438(W) x 660(D) x 88(H) mm, it has 16 DDR4 RDIMM slots that can take up to 512GB.

Standard I/O connectivity and expansion slots include a PCIe x16 slot, an M.2 (M-key) socket for SATA 3.0 or PCIe, an RJ45 serial console, two USB 2.0, and two MGMT ports.

Key features:

• Dual 3rd Gen Intel Xeon scalable processors (ICL-SP). • 16x DDR4 RDIMM, max. 512GB. • 8x or 4x NIC modules, Max. 64 GbE ports. • 1x PCI-E x16 expansion slot. • Optional IPMI 2.0 module. • 1200-Watt redundant power supply.

Backplane Systems Technology (02) 9457 6400 www.backplane.com.au

Eliminating flow disturbances due to crowded equipment conditions

With its flow profile and anti-swirl tab design, the Vortab process flow conditioners correct fluid disturbances to mimic adequatepipe straight run and produce a repeatable, symmetricalflow profile.

Vortab flow conditioners are proven to be the industry’s lowest pressure-drop, flow-conditioning technology, which reduces energy costs and minimises process design considerations.

Their use also eliminates the extra pipe cost and technician labour for additional lengths of pipe straight run and/or moving equipment around to accommodate new pumps.

In long lengths of straight pipe, swirl reduction and velocity profile correction occur naturally due to diffusion, friction and turbulent mixing.

The device’s anti-swirl and inclined vortex generating profile correction tabs, projecting from the inside pipe surface, generate vortices that accelerate these natural pipe effects to create a uniform, non-swirling, symmetrical flow profile in a much shorter section of pipe.

The simple, flexible designs of the Vortab Insertion Plate (Model VIP), Vortab Elbow (Model VEL) and the Vortab Insertion Sleeve (Model VIS) configurations provide a cost-effective, easy-to-install solution that supports proper pump installation. They can be made from carbon steel, 316L stainless steel or Hastelloy C-276 and in almost any pipe size.

A variety of process connections are also available – ANSI flanges, male NPT threads, butt welded preps or retaining wafers.

AMS Instrumentation & Calibration (03) 9017 8225 www.ams-ic.com.au

New Alfa Laval CM Connect leverages digitalisation to optimise hygienic processing

As Industry 4.0 evolves, the CM Connect is a natural next step on the customer digitalisation journey, expanding the Alfa Laval range of condition monitoring solutions. With complete visibility of all connected assets, plant operators can detect issues that impact future performance, prevent unplanned downtime, and improve asset management.

Acting as a gateway communicating via Bluetooth, the CM Connect can link up to 10 Alfa Laval CM wireless vibration monitors launched recently.

It then transmits the data over a 4G cellular network to the cloud for review and analysis on an intuitive, user-friendly dashboard.

Advanced vibration analysis enables detection of any deviation from pre-set equipment threshold values.

Should deviations occur, an SMS or e-mail notifies users who can take action in real time based on data analysis. Besides linking the CM wireless vibration monitors, the CM Connect can also act as a sensor.

It measures vibration, inboard temperature, and total runtime when mounted on Alfa Laval LKH, SRU, SX and DuraCirc pumps, or other rotating machines, such as agitators or mixers.

As part of the company’s commitment to digital transformation in hygienic industries, Alfa Laval explores and develops Industry 4.0 solutions to advance competitive advantage for customers.

Alfa Laval (02) 8822 2700 www.alfalaval.com.au