Primus overview catalogue eng by Primus laundry

PRODUCT OVERVIEW

SC/SP RANGE

PROFESSIONAL WASHER EXTRACTORS PROFESSIONAL DRYERS

SC65

HARD MOUNTED WASHER-EXTRACTORS

RANGE

SP10

SPS10

RX80

RX105, 135

RX180, 240, 280

PAGE 4

SOFT MOUNTED WASHER EXTRACTORS

RANGE

FX65

FXB

FX80

FX105

FX135

MEDICAL BARRIER WASHER-EXTRACTORS

FX240

MEDICAL BARRIER WASHER-EXTRACTORS

RANGE

FX180

RANGE

FXB180

FXB240

FXB280

MB33

MB44

PAGE 12

TUMBLE DRYERS

T (HP)

RANGE

DAM6/C/HP

SD10

SDS10

T9 (HP)

T 11, 13, 16 (HP)

T13/13

PAGE 4

TAMS13

T24, 35 PAGE 16

FLATWORK IRONERS

RANGE

I25

I30

I33

I50 PAGE 20

IF50, IR50

PAGE 6

RX350

RX520

SOFT MOUNTED WASHER EXTRACTORS

RANGE

FS33, 40, 55

FX280

FS800, 1000, 1200

PAGE 8

PAGE 10

MB66

MB70

MB90, 110

MB140, 180 PAGE 14

PAGE 12

TUMBLE DRYERS

RANGE

DX11, 13, 16

DX24

DX25, 34

DX13/13

DX20/20

DX55

DX77, 90 PAGE 18

PAGE 22

IFF50

CROSSFOLDER

STACKER

I80, IF80, IR80, IFF80

PROFESSIONAL WASHER EXTRACTORS PROFESSIONAL DRYERS

SP/SD RANGE

SP10

SPC10

SPS10

SPSC10

SD10

SDC10

SDS10

SDSC10

SC65

DAMC6

DAM6

DAM6 HP

FEATURES WASHER EXTRACTORS ■ Stainless steel outer and inner drum ■ Totally freestanding: can be installed on any floor and any level ■ Suspension with new out-of-balance logic ■ Soap box with four compartments ■ Door opens 180° for easy loading and unloading ■ Coin boxes and coin mechanisms available as an option ■ Standard with drain pump, drain valve optionally available ■ Top, front and side panels standard available in anthracite grey ■ Electrical heating or boiler-fed ■ 6 wash programs ■ Possibility of programming cycle modifier options » Added prewash » Extra wash time » Extra rinse ■ LED indication of the status of the program ■ Time remaining countdown

FEATURES DRYERS ■ G alvanized steel cylinder ■ Oversized lint filter located in front for easy cleaning ■ Powerful exhaust blower assures short drying times and low operating costs ■ Wide door opening of 180° for easy loading and unloading ■ Coin boxes and coin mechanisms available as an option ■ Top, front and side panels standard available in anthracite grey ■ Electrical or gas heating ■ 4 drying programs ■ LED indication of the status of the program ■ Time remaining countdown

SDC10 SPC10

DAM6/DAMC6 DAM6 HP

SC65

SP10

SPS10

SDS10

SDH10

SD10

TYPE

CAPACITY DRUM VOLUME MOTOR Frequency controlled EXTRACTION SPEED G-FACTOR

SC65

SP10

SPC10

kg I

6,5 60

10 96,8

kW rpm

1400 530 3x400V 50Hz 1x220Vx60Hz 3x440Vx60Hz 3,2

0,67 1200 440 1x220-240V 50Hz 3x220-240V 50Hz 3×380-415V+N 50 Hz 4,8

0,67 1200 440

standard available

mm kg

850x595x585 73

1027×683×704 113

1126×683×704 119

m3 mm kg

0,53 915x610x660 77

0,71 1150x760x860 122

0,77 1150x760x860 128

DAM6

SD10

SDC10

6,5 112 1×230V 50/60Hz 3×400-415V 50Hz 3×400V+N 60Hz

10 198

ELECTRICAL CONNECTION ELECTRICAL HEATING DRAIN Pump Drain valve DIMENSIONS HxWxD Net weight TRANSPORT DATA Volume (packed) Packed H×W×D Gross weight

TYPE

CAPACITY DRUM VOLUME

kg l

ELECTRICAL CONNECTION

ELECTRICAL HEATING GAS HEATING MOTOR POWER DIMENSIONS HxWxD Net weight TRANSPORT DATA Volume (packed) Packed HxWxD Gross weight

DIMENSIONS HxWxD Net weight TRANSPORT DATA Volume (packed) Packed H×W×D Gross weight *OPL - On premise laundry

4,8

kW kW

N/A -

10 198 1x220-240V 50/60Hz 3x220-240V 50Hz 3×380-415V+N 50 Hz 5,2 (230V) 5,3 (400V) 7,3 0,25

mm kg

850x595x585 39

1027×683×711 68

1126×683×711 74

m3 mm kg

0,53 915x610x660 45

0,71 1150x760x860 73

0,77 1150x760x860 79

TYPE

MODEL USE

1x220-240V 50/60Hz 3×380-415V+N 50 Hz

SPS10

SPSC10

OPL*

5,3 (400V) 7,3 0,25

SDS10

washer/dryer l

1x220-240V 50/60Hz 3×380-415V+N 50 Hz

SDSC10

dryer/dryer COIN

OPL*

COIN

mm kg

1986×683×704 177

1986x683x737 120 (el.) /125 (gas)

m3 mm kg

1,25 2032×760x860 193

1,30 2032×760x860 127 (el.) /132 (gas)

CUTTING-EDGE BALANCING TECHNOLOGY Updated suspension and new sensing technologies on SP range redistribute loads and maintain cycle times - resulting in less utility costs, reduced vibration and a significant sound reduction.

UNMATCHED G-FORCE Final spin speed of 1200 RPM on SP range (1400 RPM on SC65) removes more water, reduces dry times and lowers energy consumption. 5

HARD MOUNTED WASHER EXTRACTORS

RANGE

RX80

RX105

RX135

RX180

RX240

RX280

RX350

RX520

8kg/18lb

11kg/24lb

14kg/31lb

18kg/40lb

24kg/53lb

28kg/62lb

33kg/73lb

52kg/115lb

FEATURES ■ Hard mounted, normal spin ■ Stainless steel top panel & Anthracite grey front and side panels ■ Stainless steel drum and tub ■ Xcontrol - easy to use microprocessor ■ Patented Soap Hopper ■ High capacity water inlets (RX280) ■ Large drain valve (Ø 76 mm) ■ Easy access to all vital parts from the front ■ Large door opening for easy loading & unloading

OPTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

RX80

RX105

RX135

RX180

RX240

RX280

Xcontrol Plus - Fully programmable Coin operated timer (CPS) Stainless steel front and side panels USB plug (on the back panel) Easy Soap - liquid soaps connection Liquid soap pumps Water recovery kit Steam heating version 3rd water inlet High capacity water inlets (RX180, 240)

RX350

RX520

TYPE

RX80

INNERDRUM maximum capacity 1:9 capacity 1:10 volume diameter DRUM SPEED wash extraction

Drain valve Flow amount with drain valve Steam valve connection Steam pressure DIMENSIONS Size H×W×D Net weight TRANSPORT DATA Packed H×W×D Gross weight * 200 G-Factor execution

RX135

RX180

RX240

RX280

RX350

RX520

kg litres mm

7,5 75 530

10,5 105 620

13,5 135 620

18 180 750

24 240 750

28 280 750

33 332 914

52 520 914

rpm rpm

50 820

46 760

46 760 200

42 490 (690)* 100 (standard)

38 440

200

42 490 (690)* 100 (standard)

38 540

200

42 490 (690)* 100 (standard)

150

100

kW bar °C dB (A) BSP kPa kPa l/min outer Ø mm

6/9 1-8 90 < 65 3/4“ 100-800 300-500 20

6 / 9 / 12 1-8 90 < 65 3/4“ 100-800 300-500 20

9 / 12 1-8 90 < 65 3/4“ 100-800 300-500 20

12 / 18 1-8 90 < 65 3/4“ 100-800 300-500 20

18 1-8 90 < 65 3/4“ 100-800 300-500 20

18/21,9 1-8 90 < 65 3/4“ 100-800 300-500 20

27 1-8 90 < 65 3/4“ 100-800 300-500 66-188

40,6 1-8 90 < 65 1“ 100-800 300-500 183-518

2x76

l/min

210

2x210

BSP kPa

1/2“ 100-800

3/4“ 100-800

mm mm mm kg

1115 660 785 135

1225 750 785 170

1225 750 900 190

1410 890 915 255 (315)*

1410 890 1060 275 (330)*

1410 890 1135 290 (355)*

1500 1060 1030 410

1500 1060 1315 520

mm mm mm kg

1245 710 835 145

1355 800 835 185

1355 800 950 200

1550 925 970 270 (335)*

1550 925 1130 290 (355)*

1550 925 1190 305 (385)*

1625 1088 1060 425

1625 1088 1345 535

G-FACTOR HEATING electricity (standard) steam hot water Sound pressure level Water valves connection Water pressure Rec. water pressure Water inlet

RX105

CASCADE DRUM cascade drum

POWERWASH Perforated lifting ribs bring extra rinsing effect that results in lower water consumption and better washing results. 7

SOFT MOUNTED WASHER EXTRACTORS

RANGE

FX65

FX80

FX105

FX135

FX180

FX240

FX280

7kg/15lb

9kg/20lb

12kg/26lb

15kg/33lb

18kg/40lb

24kg/53lb

28kg/62lb

FEATURES ■ F reestanding, high spin ■ Stainless steel top panel & Anthracite grey front and side panels ■ Stainless steel drum and tub ■ Xcontrol - easy to use microprocessor ■ Patented Soap Hopper ■ High capacity water inlets (FX280) ■ Large drain valve (Ø 76 mm) ■ Easy access to all vital parts from the front ■ Large door opening for easy loading & unloading

OPTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

FX65

FX80

FX105

FX135

FX180

X control Plus - Fully programmable Coin operated timer (CPS) Stainless steel front and side panels USB plug (on the back panel) Easy Soap - liquid soaps connection Liquid soap pumps Water recovery kit Steam heating version 3rd water inlet High capacity water inlets (FX180, 240)

FX240

FX280

TYPE

FX65

INNERDRUM maximum capacity 1:9 capacity 1:10 volume diameter DRUM SPEED wash extraction G-FACTOR HEATING electricity (standard) steam hot water Sound pressure level Water valves connection Water pressure Rec. water pressure Water inlet Drain valve Flow amount with drain valve Steam valve connection Steam pressure DIMENSIONS Size H×W×D Net weight TRANSPORT DATA Packed H×W×D Gross weight

FX80

FX105

FX135

FX180

FX240

FX280

kg litres mm

6,5 65 530

7,5 75 530

10,5 105 620

13,5 135 620

18 180 750

24 240 750

28 280 750

rpm rpm

49 1165 400

49 1075 400

42 980 400

42 915 350

kW bar °C dB (A) BSP kPa kPa l/min outer Ø mm

6/9 1-8 90 < 65 3/4“ 100-800 300-500 20

6 / 9 / 12 1-8 90 < 65 3/4“ 100-800 300-500 20

9 / 12 1-8 90 < 65 3/4“ 100-800 300-500 20

12 / 18 1-8 90 <65 3/4" 100-800 300-500 20

18 1-8 90 <65 3/4" 100-800 300-500 20

18 / 21,9 1-8 90 <65 3/4" 100-800 300-500 20-50

l/min

210

BSP kPa

1/2“ 100-800

1/2" 100-800

mm mm mm kg

1115 710 740 170

1115 710 790 185

1225 795 795 210

1225 795 945 255

1410 970 970 380

1410 970 1105 430

1410 970 1185 495

mm mm mm kg

1245 750 840 180

1245 750 840 200

1345 835 840 235

1345 835 985 275

1550 1025 1015 395

1550 1025 1150 450

1550 1025 1225 515

CASCADE DRUM

cascade drum

PRIMUS introduces the unique CASCADETM DRUM ■ Despite the 400 G extraction of water, the linen does not stick to the drum - which simplifies unloading. ■ Thanks to the CASCADETM concept, there are more perforations in the drum over the same surface - so water extraction is much more efficient. ■ The design of the bulges causes even more water to be extracted - so the percentage of humidity after extraction is extremely low. ■ The CASCADETM shape of the drum holes provides extra mechanical action that produces in an even better washing result.

WATCH THE FX VIDEO www.bit.ly/videofx

SOFT MOUNTED WASHER EXTRACTORS

RANGE

FS33

FS40

FS55

FS800

FS100

FS1200

33kg/80lb

40kg/100lb

55kg/125lb

80kg/176lb

100kg/220lb

120kg/265lb

FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■

■

Freestanding, high spin Stainless steel cabinet (AISI 304) Stainless steel drum and tub Xcontrol Plus - Fully programmable microprocessor Extra large door opening (FS800, FS1000 Ø 530 mm, FS1200 Ø 650 mm) Two large drain valves (Ø 103 mm) Easy access to all parts Standard liquid soap connections Frequency controlled motor PowerWash® perforated lifting ribs: more mechanical action, lower water consumption Air operated water inlet SuperEco washing programmes - significantly reduces water and electricity consumption Patented soap dispenser with 5 removable compartments

OPTIONS ■ L iquid soap pumps ■ Trace-Tech® traceability software and networking system ■ Forward and backward tilting is available. Tilting of the machine is done by external platform

FS33

FS40

FS55

FS800

FS1000

FS1200

TYPE

CAPACITY Drum volume Capacity Drum diameter MOTOR Frequency controlled DRUM SPEED Wash speed Spin speed G-FACTOR PROGRAMMER Xcontrol Plus microprocessor CABINET Stainless steel AISI 304 DRUM Stainless steel AISI 304 HEATING Electrical Steam high pressure

l kg lbs mm

rpm rpm

kW bar psi

FS33

FS40

FS55

FS800

FS1000

FS1200

335 33 80 Ø 914

400 40 100 Ø 914

518 55 125 Ø 914

807 80 180 Ø 1110

1003 100 230 Ø 1200

1180 120 275 Ø 1300

standard

38 830 350

36 750 350

33 720 350

32 695 350

standard

24 3-8

36 3-8

54 3-8

67,5 3-8 44-116

3-8 44-116

CONNECTION Electrical

3x380-480V 50/60Hz 3x208-240V 50/60Hz

Water inlet Steam inlet Compressed air inlet Drain

kW inch inch mm mm

DIMENSIONS HxWxD

mm mm mm

Net weight TRANSPORT DATA Volume (packed)

Packed HxWxD

m3 mm mm mm

4,3 1“ 3/4“ 2x76 2x3“ 1905 1195 1330 1190

7,8 1“ 3/4“ 8 2x76 2x3“ 1905 1195 1430 1560

7,8 1“ 3/4“ 8 2x76 2x3“ 1905 1195 1610 1630

11,25 3x1 1/2“ 1“ Ø8 2x103 2x4“ 1985 1495 1940 2640

15,25 3x1 1/2“ 1“ Ø8 2x103 2x4“ 2060 1790 2005 3170

18,75 3x1 1/2“ 1“ Ø8 2x103 2x4“ 2085 1855 2085 3480

4,4 2105 1430 1475 1310

4,7 2105 1430 1570 1700

5,3 2105 1430 1750 1770

7,25 2200 1690 1950 2830

9,29 2345 1865 2125 3410

10,16 2340 2000 2170 3710

Gross weight kg - = Not available Standard = Standard execution, The data concerning dimensions of machines include all extended parts

OPTILOAD®

While loading your machine, the XCONTROL+ and GRAPHITRONIC® displays the weight of the wash load. The machine will then adjust the water and energy consumption to suit the load. Therefore, you will have a guaranteed wash result and reduced energy consumption, while optimising productivity and controlling your operating costs.

MEDICAL BARRIER WASHER

FXB RANGE

FXB180

FXB240

FXB280

18kg/40lb

24kg/55lb

28kg/65lb

RANGE

MB33

MB44

MB66

33kg/73lb

44kg/97lb

66kg/145lb

FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Freestanding, high spin Complete stainless steel cabinet Xcontrol Plus - Fully programmable Stainless steel drum and tub Patented Soap Hopper Large drain valve (Ø 76 mm) Easy access to all important parts from all sides Large door opening for easy loading & unloading Automatic door positioning Easy Soap - liquid soaps connection External lubrication system

OPTIONS ■ U SB plug (on the side panel) ■ Liquid soap pumps ■ Water recovery option incl. second drain valve ■ Steam heating version ■ Water sample tap ■ Trace-Tech® traceability software and networking system ■ Second display

FXB180

FXB240

FXB280

MB33

MB44

MB66

TYPE

CAPACITY Drum capacity Drum volume Drum diameter Number of drums Number of loading doors Number of unloading doors DRUM SPEED Washing speed Highest spin speed G-FACTOR PROGRAMMER XControl Plus CABINET Stainless steel HEATING Electrical Steam CONECTIONS Electrical

FXB180

FXB240

FXB280

MB33

MB44

MB66

kg/lb l mm

18/40 180 Ø 750 1 1 1

24/55 240 Ø 750 1 1 1

28/65 280 Ø 750 1 1 1

33/75 332 Ø 650 1 1 1

44/100 442 Ø 750 1 1 1

66/150 663 2xØ 75 2 2 2

rpm rpm

42 939 370

42 914 350

45 960 335

41 915 350

standard

Graphitronic

standard

option

12/18 3-8

18 3-8

21,9 3-8

36 3-8

45 3-8

54 3-8

kW bar

3x 200-240V 50/60Hz 3x 380-480V 50/60Hz 3x DN20 3/4“ 1x DN15 1/2“

Water inlet Steam inlet DIMENSIONS Size HxWxD Net weight TRANSPORT DATA Packed H×W×D Gross weight

mm mm mm kg

1455 900 1145 430

1455 1020 1145 460

1455 1130 1145 490

1600 1560 1060 1000

1650 1610 1170 1140

1650 2160 1170 1360

mm mm mm kg

1610 1010 1235 485

1610 1130 1235 515

1610 1240 1235 550

1840 1610 1175 1090

1840 1660 1380 1280

1840 2200 1380 1510

PRIMUS HYGIENIC SYSTEM PROVIDES A TOTAL SOLUTION. PRIMUS CAN CONSULT OVER THE WHOLE PROCESS.

WATCH THE FXB VIDEO www.bit.ly/primushygiene

UNCLEAN AREA CLEAN AREA

CROSS CONTAMINATION!

MEDICAL BARRIER WASHER EXTRACTORS

RANGE

MB70

MB90

MB110

MB140

MB180

70kg/154lb

90kg/198lb

110kg/242lb

140kg/309lb

180kg/397lb

FEATURES ■ ■ ■ ■

■ ■ ■ ■

■ ■ ■

F reestanding, high spin Stainless steel cabinet (AISI 304) Stainless steel drum and tub Graphitronic® - graphic display - Communication interface enabling remote service - Multilingual microprocessor - Freely programmable Large door opening (765x340 mm) Large drain valve (Ø 126 mm) Frequency controlled motor PowerWash® peforated chamber walls: more mechanical action, lower water consumption Standard Y–pocket (3 pockets) drum on MB110, 140, 180 Standard Pullmann (2 pockets) drum on MB 70, 90 Air-operated water inlets

OPTIONS ■ L iquid soap pumps ■ Drum with 2 pockets on MB110, 140, with 3 pockets on MB70, 90 ■ Trace-Tech® traceability software and networking system ■ Tap to take water samples ■ Light and sound signalization of end of washer cycle ■ Opti-load® linen weighing and water consumption optimalization system ■ Second display ■ Self lubrication of bearing‘s oil seal ■ Second drain valve for water recycling (Ø76mm) ■ Second drain valve (Ø126 mm)

MB70

MB90, 110

MB140

MB180

TYPE

CAPACITY Drum volume Capacity 1:10

l kg lbs mm

Drum diameter POCKETS MOTOR Frequency controlled DRUM SPEED Wash speed Spin speed G-FACTOR PROGRAMMER Graphitronic® microprocessor CABINET Stainless steel AISI 304 DRUM Stainless steel AISI 304 HEATING Electrical heating Steam heating CONNECTION Electrical Water inlet Steam inlet Compressed air inlet Drain DIMENSIONS HxWxD Net weight TRANSPORT DATA Volume (packed) Packed HxWxD Gross weight

rpm rpm

kW bar

MB70

MB90

MB110

MB140

MB180

700 70 154 Ø 1000 Standard 2 Optional 3

900 90 198 Ø 1000 Standard 2 Optional 3

1100 110 242 Ø 1100 Standard 3 Optional 2

1400 140 308 Ø 1200 Standard 3 Optional 2

1800 180 396 Ø 1300 Standard 3 -

standard

36 800 360

35 754 350

33 720 350

36 695 350

standard

54 6-8

72 6-8

6-8

3x1,5“ + 1x3/4“ 1“ Ø 10 Ø 126

3x1,5“ + 1x1“ 1“ Ø 10 Ø 126

inch inch mm mm

3x1,5“ + 1x3/4“ 1“ Ø 10 Ø 126

3x380-480V 50/60Hz 3x200-240V 50/60Hz 3x1,5“ + 1x3/4“ 1“ Ø 10 Ø 126

mm kg

1830x2025x1605 2600

1830x2275x1605 2810

1880x2325x1605 2990

2100x2425x1805 3550

2195x2585x1905 4990

m3 mm kg

7,3 1985x2100x1740 2760

8,1 1985x2355x1740 2970

8,7 2080x2400x1740 3150

10,8 2250x2485x1940 3760

12,3 2265x2665x2040 5310

WATCH THE FXB VIDEO www.bit.ly/primushygiene

The TRACE-TECH® management software provides record of each wash load which allows you to ensure conformity with Hygienic standards. This can be stored and recalled whenever necessary. Parameters are continually controlled and stored to bring you a detailed report of the washing process. You are also informed if the machine can not complete required process. 15

TUMBLE DRYERS

RANGE

T HP RANGE

T11

T13

T16

T24

T35

9kg/20lb

11kg/24lb

13kg/27lb

16kg/35lb

24kg/53lb

35kg/77lb

T9 HP

T11 HP

T13 HP

T16 HP

9kg/20lb

11kg/24lb

13kg/27lb

16kg/35lb

HEAT PUMP DRYERS

FEATURES ■ S tandard stainless steel drum with large diameter ■ Easy-to-use microprocessor (ECT) ■ Combination of Radial and Axial airflow - RADAX® concept: - maximal heat transfer - low energy consumption - short drying time ■ Large door opening for easy loading and unloading ■ Self cleaning lint screen

OPTIONS oin operated version C Reversing drum Full Control programmer (FCT) Residual moisture control Sensodry®: - safe drying of delicate linen - humidity detection in % - ideal in combination with SoftWash® - ideal for dry cleaners, fire depts - available on Easy and Full Control ■ Stainless steel front

■ ■ ■ ■

T9 (HP)

T 11 (HP)

T 13 (HP)

T 16 (HP)

T13/13

TAMS13

T24

T35

TYPE

CAPACITY Drum capacity Drum volume Drum diameter MOTORS Fan Drive GAS HEATING Gas connection

T9 (HP)

T11 (HP)

T13 (HP)

T16 (HP)

T24

T35

kg/lb l mm

9/20 190 Ø 760

11/24 250 Ø 760

13/27 285 Ø 760

16/35 345 Ø 760

24 (53) 530 Ø 930

35 (77) 680 Ø 930

kW kW

0,37 (0,20) 0,18 (0,25) -

0,55 (0,20) 0,25 (0,25) -

NPT

3x220-240V 50Hz, 1x220-240V 50Hz, 3x380-415V 50Hz

Electrical connection Energy STEAM HEATING Steam connection

kW kBTU/h

12,5 42,7

16,5 56,3

19,5 66,5

25 85,3

NPT

3/4“

Steam output * Steam pressure ELECTRICAL HEATING Electrical connection Energy HEAT PUMP Electrical connection Energy EXHAUST DIMENSIONS Size HxWxD

22-32 3-6/7-10

3/4“ 3/4“ 1x208V-240V 60Hz (3x380V-415V 50/60Hz) 27-36,2 39,3-52,7 3-6/7-10 3-6/7-10

24,0

3x380V-415V/480V 50/60Hz 30/36 36/48

3x220-240V 50Hz, 1x220-240V 50Hz, 3x380-415V 50Hz

Electrical connection kW bar

9/12

kW mm

2,9

mm mm mm mm mm mm kg

1465 795 815 1465 795 1275 170 (290)

16,5-22 3-6/7-10

19,5-27 3-6/7-10

3x220-240V 50Hz, 3x380-415V 50Hz, 3×480V 60Hz 13,5 18,0

2,9

1680 795 1280 1680 795 1735 250 (375)

1975 965 1270 300

1975 965 1490 330

1570 1785 1785 1785 2075 mm 880 855 855 855 1040 mm 885 1100 1190 1310 1320 mm 1570 1785 1785 1785 mm Packed HxWxD HP 880 855 855 855 mm 1335 1540 1635 1750 mm Gross weight kg 180 (305) 240 (385) 265 (400) 270 (400) 275 * Steam output is flexible depending on steam pressure, The data concerning dimensions of machines include all extended parts

2075 1040 1540 305

Size HxWxD HP

Net weight TRANSPORT DATA Packed HxWxD

3x380-415V 50Hz +N 2,9 2,9 200

0,55 0,55 0,25 0,25 1x208V-240V 60Hz (3x380V-415V 50/60Hz) 33/39 46/50 112,6/133,1 157,9/170,6

1680 795 1070 1680 795 1525 230 (350)

1680 795 1160 1680 795 1615 250 (360)

Hot dry air

EVO4 HEAT PUMP SYSTEM - REVOLUTION IN DRYING The main innovation provides a significant reduction in energy consumption for heating, namely by more than 60%. Plus, because 100% of the waste air is recycled, the initial investment cost is reduced - there is no need to install an exhaust system or to ensure a forced supply of fresh air when installing these dryers. Furthermore, heat is recovered from the exhaust air and reused. Additional savings come from the greatly reduced requirement for installed power - less than 4 kW compared to 10 - 25 kW for the conventional dryers of this capacity. The extraordinary results of the EVO4 drying technology have been achieved by applying advanced knowledge of air conditioning and heating with heat pumps, and, in particular, the physical properties of substances used as refrigerants in refrigerators and air-conditioned cars. The easy-access machine construction is designed to minimize the time and cost of service and repair.

Evaporation from the linen

Air is warmed by heat exchanger, in which hot & high pressure refrigerant is circulating

Moisturised air

WATCH THE T HP VIDEO

Cold air

www.bit.ly/videoevo4

Humid warm air is dehumidified by water condensing on heat exchanger surface. Heat exchanger contains cold & low pressure refrigerant

17 Drain for condensed water

TUMBLE DRYERS

RANGE

DX11

DX13

DX16

DX24

DX25

11,5kg/25lb

13,5kg/30lb

16kg/35lb

24kg/53lb

25kg/55lb

DX34

DX55

DX77

DX90

34kg/75lb

55kg/121lb

77kg/170lb

90kg/198lb

FEATURES ■ E asy‐to‐use timer ■ Electrical, Gas and Steam heating ■ Large door opening for easy loading and unloading (Ø 57cm DX11,13,16, Ø 68cm DX24) ■ Galvanized drum ■ Axial airflow ■ Large lint filter

OPTIONS tainless steel drum S Stainless steel front panel Coin operated version Full OPL microprocessor Reversing drum Residual moisture control Sensodry+® (only with Full OPL microprocessor): -‐ lower energy and utility costs -‐ lower linen replacement costs ■ SafeTechTM Fire Suppression System ■ ■ ■ ■ ■ ■

DX11

DX13

DX16

DX24

DX25

DX34

DX13/13

DX20/20

DX55

DX77

DX90

TYPE

CAPACITY Capacity Drum volume Drum diameter AIRFLOW 50 Hz 60 Hz DRYING AVERAGE Gas heating Electric heating MOTOR Fan Drive GAS HEATING Energy Energy Electrical connection Gas connection STEAM HEATING High pressure 6,9 bar Electrical connection Steam connection ELECTRICAL HEATING Energy Electrical connection EXHAUST DIMENSIONS H×W×D Net weight

DX11

DX13

DX16

DX24

DX25

DX34

DX55

DX77

DX90

kg l mm

11,5 217 Ø 673

13,5 271 Ø 673

16 347 Ø 762

24 491 Ø 838

25 528 Ø 939

34 634 Ø 939

55 1021 Ø 1118

77 1408 Ø 1289

90 1656 Ø 1289

l/s l/s

203 236

260 307

283 330

354 354

354 434

755 755

1156 1156

g/min g/min

222 172

258 272

331 335

444 399

453 399

616 381

879 802

1395 N/A

1545 N/A

kW kW

0,187 0,187

0,375 0,375

0,559 0,559

0.560 0,746

0.560 2.238

kW kBTU/h

18,8 64

21,4 73

116 396

125 427

NPT

½“

26,4 29,9 38,1 48,3 79 90 102 130 165 270 1×200-240V 50/60Hz, 3×200-240V 50/60Hz, 3×380-415V 50Hz, 3×380-415/440V 60Hz ½“ ½“ ½“ ½“ 1“

1“

kW kBTU/h

39,6 135

39,5 134,7

190 648

NPT

¾“

48,6 52 61,6 119 166 178 210,3 406 1×200-240V 50/60Hz, 3×200-240V 50/60Hz, 3×380-415V 50Hz, 3×380-415/440V 60Hz ¾“ ¾“ ¾“ ¾“

¾“

Ø /mm

152

24 27 30 30 60 3×200-240V 50/60Hz, 3×380-415 50Hz, 3×380-415/440V 60Hz 203 203 203 203 254

305

mm mm mm

1622 711 1038

1622 711 1191

1622 800 1191

578 (el., gas)

2388 1349 1749 714 (gas)

2388 1349 1939 790 (gas)

624 (str.)

760 (str.)

820 (str.)

2286

607 (el., gas)

2519 1473 1892 756 (gas)

2515 1413 2019 855 (gas)

656 (str.)

806 (str.)

855 (str.)

1695 876 1362

1946 981 1226

1946 981 1378

137

150

164

197

247

279

mm mm mm

1753 762 1092

1753 762 1245

1753 838 1245

1829 902 1489

2057 1054 1323

2057 1054 1433

2177 1178 1725

TRANSPORT DATA Packed H×W×D Gross weight

151

165

179

216

273

307

1232 1829

SAFETECH - Fire supression system monitors for excessive drum temperatures and sprays water on the load should it register an abnormally high reading. A „system active“ signal also can be sent to a property´s alarm system.

SENSODRY+ Residual moisture control (available with Full OPL microprocessor) prevents over-drying and, therefore, lowers energy costs and linen replacement costs.

CHEST HEATED IRONERS I 25 30 CYLINDER HEATED IRONERS I 33 I 25

I 30

I 33

I 25 - 100,120,140 cm I 30 - 160, 200 cm I 33 - 160, 200 cm

RANGE

FEATURES I25-30

FEATURES I33

■ H omogeneous ironing pressure to ensure top ironing quality ■ PID controlled temperature regulation offering better temperature distribution and reduced energy consumption ■ Long-life heating elements ■ All vital components are easily accessible ■ Start/stop pedal ■ Backside of the basin is insulated with 25mm ceramic wool - no energy waste

■ H ighly polished steel, thin cylinder - Rapid response to temperature - Excellent thermal conductivity ■ Extra heavy press roller for high-quality ironing ■ Patented direct drive – maintenance-free – system ■ Easy to operate microprocessor MCX ■ Frequency controlled motor ■ Indication of ironing speed and temperature ■ Electric or gas heating ■ Overheating check system (OCS) with 3 temperature sensors ■ Adjustable exhaust flap

OPTIONS I25-30 ■ F requency inverter enabling variable ironing speed ■ Fan exhaust removing humid air from the ironer (I25-140, I30-160, I30-200)

I25

I30

OPTIONS I33 ■ C oin operated version ■ Central payment system operated version (CPS) ■ Chrome-plated cylinder for better thermal conduction and ironing quality ■ Pedal of insert table stop system ■ Exhaust output on the right ■ Fixation set for mounting to the floor ■ Sensospeed - auto adjustable ironing speed

I33

TYPE

I25-100/V*

I25-120/V*

I25-140/V*

I33-160 E

I33-200 E

I33-160 G

I33-200 G

ROLLER DIAMETER USEFU L ROLLER LENGHT CAPACITY* SPEED HEATING Electric Gas** MOTOR Roller motor Total installed power Max. temperature Consumption of electricity

mm mm kg/h m/min

250 1000 30 3,9/ 2-4

250 1200 35 3,9/ 2-4

250 1400 40 3,9/ 2-4

250 1400 40 2-4

290 1600 32-50 3,9/ 2-4

290 2000 52-79 2-4

320 1664 62

320 2080 70

320 1664 58

320 2080 72

kW kW

5 -

6 -

7 -

8,4 -

13,2 -

16,8 -

24.3 -

27.9 -

kW kW °C kWh

0,18 5,18

0,18 6,18

0,18 7,18

0,215 8,615

0,67 13,87

0,67 17,47

0.18 24,7

0.18 28,3

0.18 0,5

5,18

6,18

7,18

8,615

13,68

14,47

21,4

27,3

0,5

Consumption of gas Gas types Max. gas pressure Noise level Ingress protection ELECTRIC CONNECTION

m3/h

55 -

60 -

55 -

mbar dB (A)

I25-140AV** I30-160/AV** I30-200AV**

1-6

200

180

1x230V 50/60Hz 3x230V 50/60Hz 3x380-400V 50/60Hz

3x230V 50/60Hz 3x380-400V 50/60Hz

2,62 3,13 G20, G25, G30, G31, G110 50 < 57 IP42 380-415V 3AC+N 50/60 Hz 208-240V 3AC 50/60 Hz 380-415V 3AC-N 50/60 Hz 440V-480 3AC 60 Hz (1) 440V-480 3AC 60 Hz 208-240V 1AC 50/60 Hz

DIMENSIONS HxWxD Net weight TRANSPORT DATA

mm mm mm kg

1005 1400 420 110

1005 1600 420 118

mm 1150 1150 mm 1480 1680 mm 500 500 Gross weight kg 119 130 * According to ISO 9398-1, ** For the G20, 20 mbar, (1) max. 456 V *Option V = Variable Speed & Adjustable Temperature **Option AV = Variable Speed, Adjustable Temperature, & Suction Fan Packed HxWxD

1005 1800 420 135

1100 2200 500 262

1100 2600 500 294

1110 2084 755 435

1110 2500 755 490

1110 2084 755 410

1110 2500 755 465

1150 1880 500 154

1260 2280 590 300

1260 2690 590 350

1260 2190 800 485

1260 2610 800 560

1260 2190 800 465

1260 2610 800 540

SENSOSPEED® is an autonomous, combined, electronic regulation system which prevents overheating of the ironing cylinder edges and regulates the cylinder‘s speed. Reliable Premix overpressure gas burner for low gas consumption with high efficiency. Extremely low emissions with high steady performance. Infra flame covers the whole width = Maximum output. Patented outer exhaust system. Maintenance free.

CYLINDER HEATED IRONERS

RANGE

I50

IF50

IR50

IFF50

IF80

IR80

IFF80

I80

I50 - 160,200,250, 320 cm IF/IR50 - 200,250, 320 cm IFF50 - 200,250, 320 cm I, IR, IF, IFF80 - 320 cm FEATURES ■ Large surface contact with linen over an angle of 3000 ■ High polished steel, thin cylinder - Reasonable price - Rapid response to temperature - Excellent thermal conductivity ■ Easy to operate microprocessor: 20 pre-set ironing programmes ■ Indication of ironing speed and temperature ■ Reverse mode possible (IR,IF,IFF) ■ Frequency controlled motor ■ Easy to remove lint filters ■ Space saving installation against the wall is possible: front return (I50) ■ Electric, gas or steam heating ■ Overheating check system (OCS) with 3 temperature sensors ■ Ergonomic design

OPTIONS ■ I range - cylinder heated drying ironers ■ IF/IR range - cylinder heated drying ironers with length folder or rear return ■ IFF range - cylinder heated drying ironers with feeder and length folder

I50

I80

IF50

IR50

IF80

■ C hrome-plated cylinder for a better thermal conduction ■ Pedal of insert table stop system ■ SensoSpeed - auto adjustable ironing speed

IFF50

IR80

IFF80

TYPE

ROLLER DIAMETER USEFUL ROLLER LENGHT HEATING Electric heating Gas heating Steam heating Exhaust ventilation IRONING CAPACITY* Electrical & Gas heating Steam heating ROLLER SPEED ELECTRIC CONNECTION DIMENSIONS

I50-160

I50-200

I50-250

I50-320

IF/IR50-200

IF/IR50-250

IF/IR50-320

IFF50-200

IFF50-250

IFF50-320

500

1600

2000

2600

3200

2000

2500

3200

2000

2500

3200

kW kW kg/h mm

32,4 30 36 1x150

37,2 36 49 1x150

54,0 52 68 2x150

64,8 66 88 2x150

38 36 49 1x150

55 52 68 2x150

65 66 88 2x150

38 36 49 1x150

72 52 68 2x150

66 88 2x150

80 95 1,5-8

95 115 1,5-8

120 145 1,5-8

1568 2750 1185 1290

1568 3350 1185 1440

1760 3450 1320 2180

1760 4050 1320 2400

10,88 2090 3590 1450 2460

12,69 2090 4190 1450 2770

kg/h kg/h m/min.

HxWxD Net weight TRANSPORT DATA Volume (packed)

mm mm mm kg

65 80 95 120 80 95 115 145 1,5-8 1,5-8 1,5-8 1,5-8 380-415V 3AC+N 50/60 Hz, 208-240V 3AC 50/60 Hz 380-415V 3AC-N 50/60 Hz, 440V-480 3AC 60 Hz 1232 1232 1232 1232 2350 2750 3350 3950 1052 1052 1087 1087 920 1150 1290 1590

120 80 145 95 1,5-8 1,5-8 3x380-415V+N 50/60Hz 3x208-240V 50/60Hz 1568 1760 3950 2850 1185 1320 1680 1720

m3 4,24 4,97 6,00 7,03 7,14 8,62 10,13 mm 1550 1550 1550 1550 1900 1900 1900 Packed HxWxD mm 2490 2890 3490 4090 2890 3490 4100 mm 1100 1100 1100 1100 1300 1300 1300 Gross weight kg 1120 1350 1500 1850 1520 1700 2000 * Tested in accordance of ISO 9398-1, The data concerning dimensions of machines include all extended parts

I80

TYPE

ROLLER DIAMETER USEFUL ROLLER LENGHT POWER Heating Roller motor Fan motor IRONING CAPACITY**

mm mm kW (E,G) kg/h (S) kW kW (50/60Hz) kg

IR80 S

800 3186 75

103*

IF80 S

800 3186 190

103*

9,06 2090 2990 1450 1990

IFF80 S

800 3186 190

103*

190

103*

0,9

1,15

1,25

2×0,55/0,75

195

ROLLER SPEED

m/s

3-15

FAN CAPACITY

m3/h

2×1300

mm kg

1985×4260×1915 2610 2480 2900

mm kg

2080×4380×2080 2870 2740 3160

2080×4380×2080 3120 2990 3410

ELECTRIC CONNECTION

Optional Crossfolder and Stacker. (for IFF50 and IFF80)

800 3186

195 3-15 3-15 (3-8 with folding) 2×1300 2×1300 380-415V 3AC+N 50/60 Hz 208-240V 3AC 50/60 Hz 380-415V 3AC-N 50/60 Hz 440-480V 3AC 60 Hz 1985×4260×1915 1985×4260×1915 2860 2730 3150 2970 2840 3260

DIMENSIONS (HxWxD) Net weight TRANSPORT DATA Packed HxWxD Gross weight * G20, 20 mbar ** According to ISO 9398-1

2080×4380×2080 3230 3100 3520

190

195 3-15 (3-8 with folding) 2×1300

1985×4260×2010 3170 3040 3460 2080×4380×2080 3430 3300 3720

www.primuslaundry.com

CZECH REPUBLIC Alliance Laundry CE Místecká 1116 Příbor, 742 58, Czech Republic Phone: +420 556 768 800 Fax: +420 556 768 882 alliancelaundry.com/cz

WORLDWIDE HEADQUARTERS Alliance Laundry Systems P.O. Box 990 Shepard Street Ripon, WI 54971, USA Phone: +1 920 748 3121 Fax: +1 920 748 4564 alliancelaundry.com

FRANCE Alliance Laundry France 3 rue Paul Rieupeyroux F-69800 Saint Priest, France Phone: +33 (0)4 78 79 55 75 Fax: +33 (0)4 72 04 62 72 alliancelaundry.com/fr

BRASIL Alliance Laundry Systems Brasil Edifício Office Design Berrini Avenida Luis Carlos Berrini, 1748 Sala 2106 São Paulo- SP, 04571-000, Brasil Phone: +55 (11) 5505-2917 Phone: +55 (11) 5102-2938 alliancelaundry.com/br

ITALY Alliance Laundry Italy SRL 73, Via Triumplina 25123 Brescia (BS), Italy Phone: +39 (0)30 2091006 Fax: +39 (0)30 2000239 alliancelaundry.com/it SPAIN Alliance Laundry Systems Spain C/ Solsones, 2 08820 – El Prat de Llobregat Barcelona, Spain Phone: +34 93 479 54 10 Fax: +34 93 379 18 76 alliancelaundry.com/sp

www.alliancelaundry.com

CHINA Alliance Laundry Machinery Commercial And Trading Shanghai Co., Ltd. Room 101 A,1st Floor, No.1 Building NO.888 Lane Tianlin Road Min Hang District, Shanghai, China Post code: 200233 Phone: +86 21 33375288 Fax: +86 21 64227933 alliancelaundry.cn

AUTHORIZED DISTRIBUTOR

VIETNAM Alliance Laundry Vietnam Company Limited Shophouse No. SH04-03, 103 North-South Road Sala Urban Area, An Loi Dong Ward, District 2 Ho Chi Minh, VIETNAM Phone: +84 936 072 268 alliancelaundry.com INDIA Alliance Laundry Private Limited 574, Second Floor, Main Road, Chirag Delhi New Delhi – 110017 Delhi, INDIA Phone: +91 982 177 5399 Phone: +91 998 758 5708 alliancelaundry.com U.A.E. Alliance Laundry BVBA (Dubai Branch) The Curve Building Showroom GS-08 P.O. Box 393291 Al Quoz 3 Dubai, U.A.E. Phone: +971 4 347 4136 Phone: +971 4 347 4137 Fax: +971 4 347 4180 alliancelaundry.com/ae