Princess Auto Catalogue #204 - Summer 1993 by Princess Auto

mm 1VIVERSAR

MURRAY CLARK NIILO HARTIKAINEN Past Surplus Buyer Surplus Buyer See Page 80

.c rrrm

«P J y*

TURF TIRE ASSEMBLY

CC CL

• 15/6.00x6. • 3/4“ ball bearings. • Low Speed • Implement a Use tor wheelbarrow, carts ITEM 2020634 REG. $29.99

(/)

< > < Q

UMITED QUANTITIES SORRY NO RAINCHECKS

’

PRESSURE SANDBLASTER ■ 90-100 lb. tank capacity • Ceramic Nozzles - Minimum 5 HP compressor required. See Page 22. ITEM 6320501 REG. $429.99 SALE

SHOP BY PHONE

Phone orders are gladly 1 accepted at all locations! ’ Phone your local PRINCESS AUTO store or call WINNPEG TOLL FREE at 1-800 665 8685 for immediate shipment

FAX 1-204-663-7663 TOLL FREE FAX 1-800-265-4212

PRESSURE WASHER • 3.0 GPM A’R Pump • Smooth Handling H.D. Cart. See Page 9. ITEM 5791066 SALE REG. $1299.99

$999"

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14th to APRIL 17th, 1993

CO O CT .C

h»

Q. 1,000 PSI PRESSURE WASHER ^ • Deliver« 21 GPM O 1,000 PSI a • 1-1/2 HP Electric motor draws 14.7 amp« ^ which will operate off any standard household plug. See Page 11. ITEM 5791058

.rt- REG. 5469.99

SAFETY LEVER BLOW GUN

Z 8" X 1-3/4"

Complete with extra nozzle. 1/4" NPT Inlet port. ITEM 0432518 SALE REG. $5.49

O SPEED WHEEL 60 Lb. Capacity. JT See Page 40. U ITEM 2020295 LU REG. $13.49

46°/° 19*ÆW»

T* -J 14" REPLACEMENT < CLAW HAMMER HANDLE if) ITEM 2943686 REG. $2.49

59 PCE. SOCKET SET

Includes 1/4", 3/8" and 1/2" drive sockets. Sizes 3/16” to 1-1/4”. LIFETIME WARRANTY fTEM 2920643 SALE REG. $109.99

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14th to APRIL 17th, 1993

STORE LOCATIONS: OTTAWA, KITCHENER, LONDON, MISSISSAUGA, WINNIPEG (2 Locations), BRANDON, SASKATOON, REGINA, CALGARY, EDMONTON, LETHBRIDGE, RED DEER, GRANDE PRAIRIE, and KELOWNA

SUMMER CATALOGUE #204 INDEX PAGE 79 SUPPLEMENT TO CATALOGUE #203 SEE PAGE 80 FOR STORE LOCATIONS

SI IPFRWINCH >

SAVE

o JZ as

X2 ELECTRIC WINCH • 12 Volt • Rated line pull 3,000 lbs. Stall 3,500 lbs. • 40 Ft. of 7/32" cable. See Page 58. ITEM 1530567 SALE REG. $349.99

$24888 «<

EAGLE*

</) LU

5 HP AIR COMPRESSOR LIGHT INDUSTRIAL - HIGH VOLUME • 17.1 CFM @ 100 PSI • 60 Gallon Tank • Maximum Pressure 140 PSI • 5 HP Dual Capacitor 208/230 Volt 25 Amp Motor. See Page 31. ITEM 0412007 SALE REG. $1099.99

Z Q LU

£ Z

*899" l

3000 PSI X 4.0 GPM 11 HP HONDA POWERED PRESSURE WASHER • HD CAT Triplex Plunger Pump. See Page 9. . ITEM 5791108 SALE \REG. $2199.99

H O LU

</) </)

x H (/) LU

*1799^2 Û.

PULL TYPE SPRAYER

"Designed for use with any ATV or Lawn Tractor" *12 Volt DC Diaphragm Pump —J •1.8 GPM • Adjustable 0-100 PSI ^ • 15 Gal. Tank • Tubeless Pneumatic Tires • 80" to 144" Spray Coverage See Page 27. ITEM 5740006

$27777

\I / WORKSAVER

SAVE

s ave

■ö

moo0

CM CM

> <

PTO DRIVEN SEEDER/ SPREADER

SALE

DC CL < ><

«J?

3,000 WATT GENERATOR

• Fits any Category 1 - 3-point hitch • Driven by the 1-3/8" Power take-off of the tractor. See Page 27. ITEM 2410470 REG $446.99

• Belt-Diven • Continuous rating ot 2,600 Watts • 120 Volt, 21.6 Amps • Max. output of 3,000 Watts See Page 64. ITEM 0740001 REG. $436 99 SALE

$336"

$329"

cpEC^g

ELECTRIC SEEDER/SPREADER • 12 Volt DC Motor • Attaches to most vehicles • Ideal for seeding pastures, cover crops, spreading fertilizers. See Page 27. ITEM 2410462 SALE REG. S414.49

$299"

(/) LU

z o

£ o

I-

s/vo°

TOTALLY ENCLOSED TABLE SAW MOTOR

o LU

(/)

• 1 HP, 115/230 Volts • 9.8/4 9 Amps @ 115V/230V

• 3,450 RPM. See Page 63. ITEM 0754887 SALE REG. $169.99

16 BARN FAN ITEM 0770610 RETAIL VALUE S239.99

z cn LU

o DC Û.

LU <

6 PCE. JUMBO WRENCH SET

3" DRILL PRESS VISE

Sizes from 1-3/8" to 2". LIFETIME WARRANTY. ITEM 2917755 REG. $69.99 SALE

Max. Jaw Opening 2-3/4". Base 6-3/4"L x 5-3/4"W. 1 YEAR WARRANTY. See Page 16. $12" ITEM 3430204 SALE REG S20.99

$3499

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22, 1993.

CO Ci CD ■o

1/3 HP JET PUMP • Shallow well application • Max. lift 25 Ft. • 760 GPH ® 5 Ft. Lift • 1 YEAR WARRANTY. See Page 12. ITEM 5720073 SALE REG. $219.99

*169"

1/2 HP JET PUMP • Shallow/Deep well adapters available. • Shallow Well 910 GPH ® 5 Ft. Lift • Deep Well 210 GPH @ 90 Ft. Lift • 1 YEAR WARRANTY. See Page 12. ITEM 5720081 SALE REG. $249.99

$19999 JI

SAVE

21/°

CL <

“WATER WIZARD" SUBMERSIBLE WATER PUMP “SNAPPY JOHN” 1/4 HP SUBMERSIBLE SUMP PUMP 2,100 U.S. Gallon Per Hour O 5 Ft. See Page 14. REG. ITEM 5771316

*99"

> < O C/5 LU Z Û LU

i V

Ideal Utility Pump 1/8 HP. 1,140 U.S. Gallon Per Hour O 5 Ft. See Page 14. ITEM 5771134 SALE REG. $94.99

$7499

Ü LU

DAYCOik

co co

m 5/8" x so' HEAVY DUTY ^

I H Z

INDUSTRIAL RUBBER HOSE

600 PSI burst pressure. Handles 180°F water. ITEM 4790184 REG. $39.99

CO LU

o CE

4/10 HP

SUBMERSIBLE WASTEWATER and SEWAGE PUMP • 4/10 HP heavy duty motor • Pumps up to 2" solids • All metal body • Cap. 80 GPM « 5 Ft. head. See Page 14. ITEM 5771142 SALE REG. $244.99

$19999

WATER QUICK COUPLER

< CO

Includes male nipple and female coupler. Constructed of brass and stainless steel. ITEM 4790200 SALE REG. $5.99

$399

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22, 1993.

(%g]l

<v •

40%

•* V

7 4" HIGH SPEED GRINDER

PISTOL GRIP METAL SHEAR 1/4" NPT Inlet. 3/16* wide cutting ahaar ITEM 3407137 SALE REG. $79.99

17,000 RPM. Raqulraa 60-90 PSI. 1/4* NPT Inlat. ITEM 3407111 REG. $49.99 SALE

$29"

Bfet

' X- >., r

3/4" DRIVE HD AIR IMPACT WRENCH 800 FtVIbs. of Torque. 4,200 RPM. Avaraga Air Consumption 7.6 CFM • 90 PSI. Saa Paga 33. ITEM 3416062 SALE REG. $199.99

STRAIGHT GRIP METAL SHEAR 1/4 NPT Inlat 3/16" wide cutting shear. ITEM 3406226 REG. $69.99 SALE

$4g99

$14999

$AV£

43%

1 r

S'AIT

•V

STRAIGHT

S üEä WHEELS

igrf

-»• j : V . /Sä

A24R - long life, ferrous metals. See Page 18. ITEM 3402807 - 7 X 3/32 X 7/8 ITEM 3416146 - 7 X 3/32 X 5/8 SALE REG. $5.29

$299

DEPRESSED CENTER GRINDING WHEELS A24R - long Ufa, ferrous metals. Sea Page 18. ITEM 3401965 - 7X1/4 X 7/8 SALE REG. $5.99 ITEM 3418161 - 5 X 1/4 X 7/8 SALE REG. $4.99

$049

$289

14" CUTOFF SAW Max. Depth of cut 4°. Visa swivels to 45°, 3,800 RPM, output 2 HP, 14 amp AC/DC motor. Sea Page 19. ITEM 3411337 REG. $299.99 SALE

*229"

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22,1993.

SAVf

33%

BEBjÇà 3/8“ X 50‘ HIGH VISIBILITY YELLOW RUBBER AIR HOSE ITEM 0431981 REG. $39.99

ENGINE CLEANER/BLOW GUN KIT

$19"J

SALE

SAVE -00

Includes: Engine and Machinery Cleaner and a Blow Gun. ITEM 0434001 SALE REG. $20.99

$13"

SAVE

*26°

bebq AIR HOSE REEL with NYLON HOSE Mount on wall or hang on ceiling. Hose extends from 1 to 28 feet. ITEM 0430454 REG. $62.99

SALE

$39"

2p£ > >‘3

;

HIGH PRESSURE FINE FINISH SPRAY GUN 9 Oz. gravity fed cup. 40-90 PSI working pressure. 1.6-1.4 CFM air consumption. See Page 38. ITEM 0450148 REG. $75.99 SALE

$4g99

1 HP TWIN TANK AIR COMPRESSOR

COMPRESSOR PUMP

• Professional Model • Olllesa/Maintenance free • Twin Stacked 2 Gal. Tanks • Ideal for Roofers and Contractors See Page 30. ITEM 0412072 SALE REG. $369.99

• 2-3/4” Bore Twin Cylinder • Max. PS1120 • Requires 2-3 HP Motor •8.5 n 1.5 CFM « 750/1150 RPM •10” Pulley ITEM 0411371 COMPARE AT $269.99 SALE

$31999

«■■■I

$179"5

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22,1993.

Over 1500 surplus Items to select from In every store.

« ^1

50%

Unique products at reduced prices

saveO

LIQUID LEVEL SWITCH Rated 120 volts,

10 Amps. ITEM 0705020 REG. »4.05

50% 3/4 HP VACUUM PUMP

GEARHEAO MOTOR 27 RPM 12 VOLT

4 CFM • 0" Hg. ITEM 0411850 REG. $127.39

SALE

3/8" shaft. O'all dim.: 3“ x 4-1/4" x 5-1/4". ITEM 0755546 REG. $31.25

LOADBINDER Distance between hooks 13-1/2” open; 10-3/4 Take-up 2-3/4", leve 7-1/4". ITEM 3809464 REG. $8 99 SALE

GEARHEAD MOTOR 200 RPM 115 VOLT

$499

1/2“ Shaft. 10 “L x 4-1/2"W x 4-1/2"H. ITEM 0754168 REG. $46.55

115 VAC COOLING FAN 4-3/4" x 3 Blade. ITEM 0770115 REG. $13.49 SALE

$799

GAS SHOCK CYLINDER Extended Length 7-5/16“. Body length 4-1/2". ITEM 1205152 REG. $2.99

SALE

$-149

12V DC RED BRAKE LIGHT Light measures 5-1/2" x 2-3/4”. O'all height 6-3/4". No Bulbs. ITEM 4214102 REG. $4.99 SALE

GARDEN HOSE QUICK CONNNECTOR ITEM 5771209 REG. 79« SALE

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22,1993.

! ft I i

save

33%

SELF ADJUSTING CUTTER-STRIPPER

HAND RIVETER Three nose piece sizes: 1/8", 5/32”, and 3/16*.

Built-In cutter and gauge. For single or multiple strand wire. LIFETIME WARRANTY. ITEM 2921211 REG. $8.99

SALE

$599

LIFETIME WARRANTY. ITEM 2922219 REG. $27.99

SALE

$-| 099

3/4” DR. REVERSIBLE RATCHET LIIFET1ME WARRANTY. ITEM 2910297 SALE REG. $34.99

VALVE SPRING COMPRESSOR Makes compressing and removing the keepers a simple job. LIFETIME WARRANTY ITEM 2991065 SALE REG. $29.99

$24"

$-| Q99

(

SAVE

42%

SAVE

33% Ceudis) H.D. SNAP RING PLIERS KIT DOUBLE FACED SLEDGE HAMMER 8 Lb. - 32” Hickory handle. LIFETIME WARRANTY. ITEM 2940096 REG. $17.99

SALE

$-J-|99

Change from external to Internal snap ring pliers. Kit Includes four pairs of straight and four pairs of bent nose tips, and a hex key . LIFETIME WARRANTY. ITEM 2921385 SALE REG. $13.99

$■799

9 PCE. DENT PULLER Multi-purpose tool with thousands of usesl ITEM 4290318 \REG. $25.99

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22,1993.

SAVE scQ00

^CHAR-LYNN HYDRAULIC ORBIT MOTORS

“H" Plus low spssd, high torqus motors 4 bolt flangs mount. 1" shaft. 1/2“ NPT ports. 1800 max. PSI. 12 GPM - Instantly Reversible. Sae Pago 69. Cu. In. 10 GPM • 1000 PSI Torquo REG DispJ Modal Rsv. RPM (Lb. In.) ITEM PRICE SPECIAL 787 101-1001 2.8 $231.99 $181.99 347 1220128 496 189.99 101-1002 4.5 545 1220136 239 99 383 101-1003 5.9 699 1220144 248.99 198.99 232 ^101-1004 9.7 1220151 255.99 205.99 1189

♦ ' ’

HYDRAULIC t DIRECTIONAL CONTROL VALVE • 3 Datant Positions tor controlling Revarslblo Hydraulic Motors Saa Paga 73. ITEM 1240373 REG. $118.99

HYDRAULIC GEAR PULLER KIT Can ba assembled in a variety of ways. It can ba used as a 2 or 3 Jaw Puller with 4", 6", or 8*jaws. It can also ba assembled as a bearing puller. FTEM 1259993 REG. $213.99

f3RESEN JL ADJUSTABLE RELIEF VALVE

SALE

$88"y

SAVE FLOW (SPEED)

* A0 4

CONTROL VALVE with RELIEF VALVE

SAVE

Sae Page 74. ITEM 1241009 REG. $135.99 SALE

30%

'"4 \)

$95"

100-1,200 PSI. 1/2” NPT Port Size. See Page 74. ITEM 1242189 REG. $48.99 \SALE

$33"

SANDBLAST HOOD With air supply mask. Built in regulator. Keeps users cool. Requires a fresh, clean air supply. See Page 39. ITEM 5041074 REG. $124.99

TRACTOR SEAT Molded cushion. Black vinyl cover. Sae Page 43. ITEM 2060366 REG. $46.99

$36" SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22, 1993. FREE 300 PAGE CATALOGUE PRINCESS AUTO carries many items that are not listed in this present catalgue. For a complete listing with prices and specifications, get a copy of our 300 page Buyer's Guide • Pick one up at your nearest PRINCESS AUTO STORE • Write, phone or fax for a free copy WINNIPEG, Box 1005, R3C 2W7 Phone (204) 667-4630, Fax No.. (204) 663-7663 NAME: ADDRESS: CITY/rOWN POSTAL CODE:

PROV: «204

fl < i [i j !| il

PRINCESS AUTO PRESSURE WASHERS 3,000 PSI 11 HP Honda Powered Pressure Washer • Industrial 11 HP Honda Engine - With oil alert which shuts oft engine if oil level is too low ■ 3,000 PSI - 4.0 GPM CAT Triplex plunger pump. Features UNIFLOW design which Reduces cavitation risk and increases pump life. ■ Heavy Duty Gun and Dual Wand ■ C/W high and low pressure nozzles • 40 ft. of H.D. Wire Braid Hose • Thermal Relief Valve. Shpg. Wt. 230 lbs. 5791108-REG. 2199.99 SALE PRICE UNTIL MAY 22, 1993 ...

1799"

2,000 PSI 5.5 HP Honda Powered Pressure Washer HIGH PRESSURE HOSE REEL •Holds Up To 100 Ft of 3/8" Hose • 3,000 PSI Rating ■ 900 Brass Swivel Inlet ■ Greaseable Bearing on Both Ends • Adjustable Brake

i /

• Painted with Corrosion Resistant Black Powder Epoxy Paint • Fits above pressure washer or easily bolts to axlstlng equipment. 4 f\r\gg 5791249............................1 y y

2,000 PSI 5.5 HP Honda Powered Pressure Washer

• 5.5 HP Honda Engine - has oil alert which shuts engine off when oil level Is too low • 2,000 PSI x 3.0 GPM A*R Pump - has solid ceramic plungers for extra long life ■ Smooth Handling H.D. Cart • Comes with 30 Ft. of Hose ■ H.D. Gun and Insulated Wand with High/Low Adjustable Nozzle. Shpg. Wt. 110 lbs.

1299"

5791066 .............

highN 131 w.

PRESSURE WASHER jö* PUMP <

Horizontal

* 25 Imp. gal. water tank • 5.5 HP Honda Engine - has oil alert which shuts engine off when oil level Is too low * 2,000 PSI x 3.0 GPM A*R Pump — has solid ceramic plungers for extra long Ilfs • High/Low Adjustable Nozzle. Comes with 30 ft. of hose and Shipping Weight Is 120 lbs.

5791090 ..

1449"

- :

I oil bath crankcase duplex plunger pump.2.7 GPM. 1,000 PSI. 1,740 Crankshaft RPM. Suction lift dry 3 ft. primed 20 ft Brass head and cylinders. Aluminum alloy crankcase, hardened ductile Iron crankshaft, aluminum connecting rod, ceramic pipe plunger. 5/8” female shaft. O'all. Dim.: 11-1/2" x 7-1/2" x 4-3/4". Wt. 9 lbs.

5791009 ....................

199“/ 9

2,000 PSI 5.5 HP Honda Powered Pressure Washer

1,500 PSI 5.0 HP B&S Powered PressureWasher

•ENGINE: 5.5 HP Honda with low oil alert 3.600 RPM • PUMP: 2,000 PSI x 3.0 GPM A/R 3-piaton, triplex plunger pump • UNLOADER VALVE: Infinitely variable • INJECTOR VALVE: Infinitely variable (Downatream). • Cornea with a high/low adjustable nozzle, wand, gun, carrying Ihandle with base and 30 ft. of hoee. Shpg. Wt 60 lbs 5791140

1099"

POWERED

• ENGINE: 5.0 HP BAS angina ■ PUMP: 1,500 PSI x 3.0 GPM A/R 3-piaton, triplax plunger pump • UNLOADER VALVE: Infinitely variable • INJECTOR VALVE: Infinitely variable (Downatream). Complete with a high/low adjuetable nozzle, wand, gun, carrying handle with baae and 30 ft of hoee Shpg Wt. 60 (be. 5791033 ...............

849"

■

HYPRO PRESSURE WASHER PUMPS and PARTS

1,500 PSI 3.5 HP B&S Powered Pressure Washer

5790548 - BODY For 500 PSI PUMP ......... 5790522 - BODYFor 1,000 PSI PUMP........ PISTON REPAIR KIT - For 500 PSI PUMP. 5790886 .............................................................. PISTON REPAIR KIT - For 1,000 PSI PUMP. 5790878 VALVE - For 500 Â 1,000 PSI PUMP.

349.99 82.99 74.99 17.99 40.99 15.99

5790894 .................................................................. HIGH PRESSURE INJECTOR with HEAD - For 1,000 PSI PUMP. 1.

• ENGINE: 3.5 HP BAS engine • PUMP: 1,500 PSI x 2.0 GPM A/R 3-piston, triplex plunger pump • UNLOADER VALVE: Infinitely variable ■ INJECTOR VALVE: Infinitely variable (Downstream). Washer comes complete with high/low adjustable nozzle, wand, gun, carrying handle with base and 30 ft. of hose. Shpg. Wt. 60 lbs. 5791132 ...............................

699" PRESSURE WASHER HOSE

64.99

PUSH BUTTON LATCH Jl <*

amccs 1 STXxrrON POWERED

254.99 279.99

(A) 5790175 - 1,000 PSI PUMP (B)1,000 PSI PUMP with HIGH PRESSURE INJECTOR . 5790415

5790365

TWIN CYLINDER ' HYPRO PUMPS Cast-Iron housing with ball bear ings. 5/8" shaft. 1/2" NPT porta. (A)5790167 -500 PSI PUMP

Includes outside handle and key mechanism. 2 keys. 8” long x 2” deep. 3890431

For use on high pressure washers. 3/8" NPT male ends.

499

Length

BRAID

30 ft 30 ft. 50 ft.

Fabric Wire Wire

Max. PSI

ITEM

2.000 3.000 3,000

5791025 5791165 5791173

PRICE

34.99 52.99 79.99

1,000 PSI PRESSURE WASHER • Built by the world's largest manufacturer of Plunger Pumps • The compact washer Is Ideal for many cleaning jobs around the home or shop! • Delivers 2.1 GPM @ 1,000 PSI •1-1/2 HP Electric motor draws 14.7 amps which will operate off any standard household plug in ■ Comes with 26 ft of pressure hose • Gun with 2 piece insulated wand • Downstream soap injection ■ Pressure gauge ■ Weighs only 32 lbs.

469"

5791058 ..........................................

A-R PRESSURE WASHER PUMPS Triplex plunger pump with solid ceramic plungers for extra long life. Mounts directly to a gas engine. 3/4" hollow shaft. ITEM Wt. Output Pressure Gas Engine (lbs.) Required 3 GPM 3 GPM

1,500 PSI 2,000 PSI

10-1/2 11

3 HP 5.5 HP

5791124 5791116

PRICE

429.99 469.99

PRESSURE WASHER COMPONENTS Interchangeable with Most Pressure Washers sold at PRINCESS AUTO!

HI PRESSURE NOZZLE - For 2,000 PSI Washer.

5790652 ..................................................................

8.99

HI-LO NOZZLES - Use in conjunction with downstream injectors. Change from soap to rinse with a twist of the nozzle housing. Rinse angle 20°. Stainless steel nozzle Inserts with sizes from .35, .40 to 1.00 GPM at 40 PSI (nozzle Included).

30.99

5790233 ............... SPRAY GUNS - High Impact nylon handle remains com fortable whether spraying hot or cold water. Trigger lock locks nozzle In closed position. (A) GUN - Rated to 1,500 PSI @ 5 GPM.

29.99 34.99 24.99 17.99

5790308 .... (A) 3,800 PSI SPRAY GUN - Rated to 8.0 GPM. 5791215................................................................ (B) 48 VENTED WAND. 5791199................................................................ (B) 24" INSULATED WAND.

5791181 ................................................................

THERMAL RELIEF VALVE - Protects your pump from excess heat build-up during by-pass.

24.99

5791223 ............................................... NOZZLE HOLDER. 5791231

14.99

PRESSURE-ACTIVATED UNLOADER VALVE - Gun/Hose remains fully pressurized while pump unloads to zero. Unload pressure adjustable from 0-2,900 PSI. Good for flow rates 1.3-10.9 GPM, Single/Multiple gun systems. To enable one unloader to be used for many different system sizes where pressure control Is required.

86.99

5790449

DOUBLE LANCE WAND - Holds two different nozzles one for apply! ng soaps,etc. at low pressures; one high pressure. Flo w is controlled from one nozzle to the other by turning the handle grip. 5790803...................................................

UNLOADER VALVE - Straight-thru design minimizes pressure loss. Adjustable to compensate for nozzle variations. 400-1,000 PSI. Capcity to 4 GPM. Single-gun systems where compactness Is Important.

(B) 20 FT. EXTENSION WAND.

LIQUID INJECTORS - For downstream injection appli cations.

5791207 .................................................. (C) SWIVEL CONNECTOR - For above. 5790316................................................... (D) SPRAY NOZZLES - 1/4“ NPT.

64.99 229.99 . 16.99 8.99

SPRAY NOZZLES - 1/4" NPT. LO PRESSURE NOZZLE: For 2,000 PSI Washer.

5790845 ............................... ..................................

8.99

5790274 ........................................................... 5790423 - 8-11 liters/m 5790837-11-15 llters/m

steel case. 1/4" NPT brass bottom connection.

21.99

female ports. — 5790282 SWIVEL CONNECTOR - 1/2" NPT male x female garden hose. — 5790290

2.95

HIGH PRESSURE GAUGES PRESSURE RANGE 0-1,000 0-1,400 0 - 2,300 0 3,600

ITEM

5780093 5780101 5780119 5780127

34.99 34.99

CHECK VALVE - Pressure range to 1,200 PSI, 1/2" NPT

HIGH PRESSURE STAINLESS STEEL, LIQUID FILLED GAUGES Stainless

63.99

RIGID CASTER

PRICE

18.99 18.99 18.99 18.99

»s\

3" x 1-3/4" wheel. O'all. Height. 4"y. 2040293 ....

JET PUMPS sMoo

on 5720073

WAYNE® has been one of North America's largest manufacturers of water pumps for over 35 years. (A) 1/2 HP SHALLOW WELL JET PUMP This pump will provide dependable water delivery for Hfta from 0 to 25«. Will deliver 936 GPH @ 5 ft lift @ 20 PSI. 420 GPU <§> 25 ft lift @ 40 PSI. 1-1/4" NPT Inlet. 3/4" NPT discharge 5720115 .......................................................................

249"

(A) 1/3 HP SHALLOW WELL JET PUMP (A) 1/2 HP JET PUMP

(A) 1/3 HP JET PUMP

Shallow well application only!

Shallow well application

Title pump will provide dependable water delivery for lifts from 0 to 25 «. Will deliver 760 GPH @ 5 ft. lift @ 20 PSI. 207 GPH deliver 25 ft. @ 40 PSI. 1-1/4" NPT Inlet 3/4" NPT discharge 5720073 - HEG. 219.99 SALE PRICE UNTIL MAY 22. 1993...................................

169"

(B) 1/2 HP CONVERTIBLE JET PUMP This pump can be used tor either shallow or deep wiell applications, Simply purchase the pump and the appropriate adsapter. As a shallow well pump It will deliver 910 GPH @ 5 ft lift @ 20 PSI, 325 GPH @ 25 ft. lift @ 40 PSI. As a deep well pump delivers 415 GPH @ 60 ft. lift, 210 GPH @ 90 ft. lift. PUMP LESS ADAPTER 5720081- REG. 249.99 SALE PRICE UNTIL MAY 22, 1993

199"

SHALLOW WELL ADAPTER - For 1/2 HP pump. Use when lift Is less than 25 ft 1” NPT Inlet 3/4" discharge 5720099

36.99

1/2 HP PUMP Deep Shallow well applications'

DEEP WELL ADAPTER - For 1/2 HP pump Uee when lift Is over 25 ft. 1-1/4" NPT Inlet. 1" dlecharge 5720107 .................................................

36.99

CENTRIFUGAL PUMP

PERMA-CHARGE BAGTYPE PRESSURE TANKS

[®sw]

Cast iron pump body. Suitable for liquids up to 180‘ F. Pump la cradle mounted with a silencer for quiet operation. Air volume control tapping may be used In connection with a pressure tank. Discharge housing can attached In four positions to permit hori zontal or vertical discharge. Inlet size 1-1/2" NPT. Outlet 1-1/4" NPT. Can be wired for 115 or 230 VAC. 1-1/2 HP. Max. output 75 U.S. GPM. Max. head 105 ft. Wt. 40 lbs.

349"

5770979 .

1/3 HP SELF-PRIMING CENTRIFUGAL EFFLUENT PUMP 3? « [<S3w] *

(J '

For septic tanks or use as 'J portable pumping outfit. ÜMtCao. 2,400 U.S. GPH; j, 40 U.S. GPM at 27 ft head; "10 U.S. GPM at 47 ft. head. ' 1-1/4" suction and discharge. Wt. 43 lbs.

5770037 ....................

214"

These tanks have a replaceable beg Inside a metal tank. The tanks are factory precharged to 30 PSI (2 gal. precharged 20 PSI) with air around the bag. Water enters the bag and expands It to Increase the air pres sure to cut out level. Max. working pressure 100 PSI. 5 YEAR WARRANTY. Capacity Dia. X Height 14"x14" A 6.5 Gal. B 16 Gal. 16” x 19” C 21 Gal. 18”x 33"

rTEM PRICE 5730130 50.99 5730106 164.99 5730114 179.99

VERTICAL GALVANIZED CHARGEABLE PRESSURE TANKS 30 GAL TANK 16" dis. x 40" high. 5730031

42 GAL Tank 16" dla. x 52" high. 5730049

134"

154"

HEAD LAMP Hands free comfort while camping, skiing, doing auto repairs, etc. Light tilts for long or short distances. Cushionbacked molded styrene head piece, Uses 4AA batteries but will operate on only 2 batteries (not Included). 4210001 ....................................................................

9®V/

SELF PRIMING CENTRIFUGAL PUMPS

4 HP/ 2 INCH SEMI TRASH PUMP 5.5 HP/ 3 INCH SEMI TRASH PUMP

4 HP/ 2 INCH GENERAL PURPOSE PUMP (A) 4 HP/2 INCH GENERAL PURPOSE PUMP - 2" selfprlming centrifugal pump. Max. lift 26 ft., max. head 111 ft. 132 GPM max. 5771464........................

519"

5.5 HP/ 2 INCH HIGH HEAD PUMP

(B) 4 HP/2 INCH SEMI-TRASH PUMP - 2" self-priming semi-trash pump will handle 3/4” solids. Max lift 26 ft, max. head 70 ft. (B) 5.5 HP 3 INCH SEMI-TRASH PUMP - 3” self priming semi-trash pump will handle 3/4" solids, max. lift 26 ft., max head 76 ft., max. capacity 264 US GPM. Weighs 58 lbs. 5771605...........

699"

PORTABLE WATER PUMP

(C) 5.5 HP/2 INCH HIGH HEAD PUMP - 2" self-priming aluminum pump. Max. head 166 ft (75 PSI), max. lift 26 ft., max. capacity 106 US GPM. Weighs 62 lbs. 5771472

749"

SELF-PRIMING CENTRIFUGAL . AGRICULTURAL PUMPS

sjl'iïpi

v80°° '

PACER*

These pumps can be used for water, liquid fertilizer, agricultural chemicals as : ■

™ Ideal for irrigation, construction, swimming pools, heavy flooding, agricultural chemical transfer and more. Tough cast iron construction 3 HP Briggs & Stratton engines. Handles up to 3/8" solids. 2" NPT Inlet and outlet. Capacity 105 GPM 0 20 ft. head. 71 GPM © 50 ft. head. 32 GPM © 80 ft. head. 5771282 ............................................................ BUSHING - 2" Male NPT x 1-1/2" Female. 5714159 ............................................................

SELF-PRIMING PUMP

3 HP MODEL - 165 GPM © 10 FT. head. 5771563-REG. 319.99 SALE PRICE UNTIL MAY 22, 1993 ......... 5 HP MODEL - 200 GPM © 10 ft. head. 5771571 -379.99 SALE PRICE UNTIL MAY 22, 1993......... PUMP REPAIR KIT - For above pumps. Can also be used on ASM, Pilot, and Marland pumps. Contains O-rings, shims and shaft seal. 5791082 ......................................

249" 299"

29.99

[<ssw]

LOW PRESSURE GENERAL PUR POSE CENTRIFUGAL PUMP 2" suction and discharge. Requires electric motor or gasoline engine to directly couple to pump at 3600 RPM. 3 HP motor required (motor not included). Rated at 5,000 GPH. 5/8" shaft. Wt. 33 lbs 5770094 ........................................................

well as many other chemicals. Pump housing, volute and impeller are 30% glass-reinforced polyester. Working pressure up to 50 PSI. 2" NPT. ports.

1® SOLENOID VALVeN

115 Volt. 11 Watt. 1/4" Orifice N.C. 1/4" NPT ports

179"

0720029 ....

SUBMERSIBLE SUMP/UTILITY PUMPS TOTAL DtSCHARQE HEAD 6 FT. 10 FT. IS FT.

20 FT.

CAPACITY A 2, tOO 2,270 1,640 530 U S OaL B 2,tOO 2.270 1,640 S30 MO 4M MO Per Hour C (A) WAYNE SUBMERSIBLE SUMP PUMP - 1/3 HP automatically luma on In 11' o< watar, ahuta off at S* 1-1/2' NPT discharge 1-1/4' raducar. with 5771613....................

129"

(B) WAYNE SUBMERSIBLE SUMP PUMP - Cast iron body. 1/3 HP automatically tu ma on In 10' of watar, ahuta off at 3-1/2* 1-1/2* NPT dlacharga with 1-1/4' raducar. S771621 .................... (C) SUBMERSIBLE SUMP PUMP - Automatic lump pump which utlltzaa an Integral arwp-actlon float twitch. 1-1/4* NPT dlacharga with gardan hoaa adaptor. Can pump 3/t* aolida. 1/4 HP motor. (771316 ___ (D) LITTLE QIANT WATER PUMP - Pumpa down to 1/S* of aurfaca. 1.200 QPH 1* NPT dlacharga with gardan hoaa adapter. (771134 - REQ. 64.99 SALE PRICE untM MAY 22. 1M3 (E) POWERFIST SUBMERSIBLE SUMP PUMP Pumpa down to 1/S* of aurfaca 750 QPH. Adaptar for 1/2 *, 3/4 ', and 1 * LD. hoaa. S771SSS ............................................

159"

99"

74"

94"

SMALL SUBMERSIBLE

WATER PUMPS

This amall 110 Volt pumpa ara completely submersible ^ CAP. UP TO ISO GPH - Outlet S/1S" Inlet 1/2” pipa O.D. 5770185 .................. 3^>r0nflP °

69.99

REPAIR KIT - For above. Contalna plaatic housing, gasket and Impeller. 5770730 ___ (B) LITTLE GIANT - Can be used either as a aubmaralbla pumpt or an open air pump. 170 GPH @ 1 ft. haad. Max. pumping height 7 ft. 1/4* mala NPT outlet. Inlet has both 1/2” mala NPT and 1/4” female NPT threading.

10.99

69.99

5771118

f*ravmn fJumpi

13 V.

1:1 Ratio. 90* Angle drive. Input and output shafts are 1- x 1-3/4” with keyway and 1 ' x 2-3/4” with 3/8” pinhole. Housing measures 6-1/4” x 6-1/4” x 4”. Rated approx. 2 HP @ 1,725 RPM. Wt. 21-1/4 lbs. 3850112

19900

109.99

5771480 ..................................

angleN DRIVE

(C) Ths "Tornado” la deaignsd for underwater use, but can be adapted to garden hoae attachments. Pumping over a 1,000 GPH, It gets the Job dona fast. Specifications: Inlet, 3/4” pipa I.D. outlet, hoaa connection. Capacity 1,100 GPM @ 2 ft haad, 950 GPM @ 10 fL haad, 250 GPM @ 25 ft 115V, 45 Amp. 390W. Shpg. WL 9 lbs.

45oo

4/10 HP SUBMERSIBLE WASTEWATER and SEWAGE PUMP

BSH

For medium commercial and agricultural, and light Industrial applications. Handle liquids and solid waste materials up to 2” dla. Pumpa feature a 2” discharge with a lift of 19 ft. Rated 80 GPM @ 5 ft. head. 24 GPM @ 15 ft. head. 5771142-REG. 244.99 SALE PRICE UNTIL MAY 22,1993

199"

PROVEN “PONY” PUMPS A

The handy Utile pumps for homeowners, RV owners, boaters, ranchers, campers, and contractors. Chrome-

™

plated brass body. Continuous duty motor. Flexible Nitrite Impeller, compounded for long life. Extra Impeller and gas ket Included. Use with fresh or sea water from 40° to 140°F. Dual ports have 3/4” external garden hose thread and 3/8" NPT internal thread.

1% . '

89"

(A) 110 VOLT-5771233 MODEL 1ft. (A) 110V AC (B) 12V DC

360 300

GAL. PER HOUR 5 ft 10 ft 20 ft 342 258

300 240

270 202

(B) 12 VOLT-5771431

SHUT-OFF (ft.)

40 ft. 90 90

48.3 46

.... LOAD

O'ALL. DIM.: (Inches) 6-1/8 X 3-3/8 X 3-3/8 6-3/4 x 3 X 3-1/8

WT. (lbs.)

1.75 Amps/360 GPH 7 Amps/300 GPH

CONVERSION KIT - For above pumps. Includes "Vltron" seal and a 'Hydrin* Impeller which do not swell. Kit contains two seals and two Impellers. This kit converts the pump for use with the very hot water or other liquids fertilizers, light oils, and antifreeze. It will work with diesel but is not recommended. DO NOT USE WITH GASOLINE 21"

REPAIR KIT - For above pumps, Includes impeller 57714«”*' -J 7 99

SELF-LUBRICATING GEAR PUMPS

SUBMERSIBLE 12V DC COMPACT CENTRIFUGAL PUMP

: ;

Inlet must be at or below level of liquid pumped. Pumps up to 339 GPH, yet draws only 1.0 to 1.5 amps at12 volts DC. Outlet has 3/8" male pipe fitting and accepts 5/8" I.D. hose. O'all. Size 2" x 2" x 5", plus outlet and mounting feet; 1/4" mounting slots. WL 1-1/4 lbs. j QÛ 5771449................................................. 46

m&i

Port Max. GPM Required Size © 1800 RPM HP 9 NPT (In.) ©0/100 PSI Q/100PSI 1/2 3/4 1

GUZZLER PUMPS

Made of cast bronze bodies and cover s, gears of free machln. Ing bronze. Replaceable oil impreg nated bronze bearings. Stainless steel shafts. Pumps may be operated In either direction. Pressures up to 100 PSI. Max. 1800 RPM. 1/4" pump has 1/2" shaft. All others 5/8" shaft.

10.3 - 5.0 14.3-10.0 17.0-10.5

1/3-1 1/3-1-1/2 1/2 - 2

ITEM

PRICE

(«*•)________ 6 8-3/4 9-1/4

5770326 98.99 5770334 107.99 5770342 111.99

SELF PRIMING PUMPS

Small stones and slurry can pass through the guzzler without hampering use. Capable of 12 ft. suction lift and a 12 ft delivery head. Capacity 10 GPM 15 GPM

Dim. of L" x W" x H" 10" x 5" x 4" 10" x 5” x 4"

Hose Size

1" 1-1/2”

ITEM

PRICE

5770029 56.99 5770227 64.99

SELF-PRIMING DRILL PUMP

(A) Pumps up to 660 GPH. Max head 66 ft. Self-prlmlng to 15-1/2" 5/16" shaft. Pump can be used with or with out mounting collar. 3/4” garden hose inlet and outlet. O'all. Dim.: 6-1/4” x 4” x 2-1/2” 5770243..........................................................

17.99

(B) This pump has a metal housing. Pumps up to 660 GPH. Max. head 100 ft. Self-prlmi ng to 15-1/2". 5/16" shaft. 3/4" garden hose inlet and outlet. O'all. Dim.: 4-1/4" X 3" X 5770250..................

.4.'........................... 22.99

Attach to 1/4" or 3/8" electric drill. Empties aquariums, water beds, household appliances, crankcase motor oil, etc. Self-priming 8 ft. to 10 ft. Pumps 240 GPH. 5° to 80X temperature range. 5770771....................

12”

GEAR PUMP

149”

This small gear pump is coupled to the electric motor with a magnetic drive. Pump delivers ap prox. 10 GPM. Motor is Æ 230 VAC. 0.2 Amps. 3,200 RPM. O'all. Dim. 8" x 4-1/4" x 3-3/4". 1/8" NPT pump ports. 5770110

jü*\

J15

H.D. HORIZONTAL WET GRINDER

A combination grlndar with a horizontal wat atona and a vertical grinding whaal. Wat atona la 8" dla. Tha grinding whaal meaaurea 5" x 2". Wat atona rotatea at 460 RPM. The grinding whaal at 3600 RPM. ITEM 3462140 .............................................

HEAVY DUTY DRILL PRESS

189”

• O all Haight 63" • Column Size 3" • Table Size 13-7/8" • 16 Speed - Chuck Size 5/8” ■ Motor 3/4 HP • 8.5 Amp •Swing 17” - Stroke 3-14" • Removable safety switch. 1 YEAR WARRANTY 3462124 ......................................

6”BENCH GRINDER

499"

^ DRILL presses Type

O'all. Ht. Column Dla. Amps ITEM PRICE

3462090

3462108

3462082

349.99

299.99

199.99

2-WAY CROSS SLIDE VISES

Size 3” 4"

1 Year Warranty.

38%

“B3 2" 3"

on V343020^

Max. Jaw Wt. Opening (lbs.)

2-1/2"

1-1/16”

3-1/4-

Jaw Opening 3"

4”

3-1/2

2-3/4”

8-1/2

Longitudinal Travel

Crosa Travel

3-1/4"

5-1/4"

6-1/8”

Overall Depth 4-1/2"

6”

TABLE SAW GUIDE

t4.

wCM

3415304

WL (lbs.)

ITEM

PRICE

3431814

18.4»

3430204

20.99

3430212 3430220 3430238

21.99 34.99 44.99

.........12.99

ITEM

PRICE

3431640

74.99

3431657

89."

3431780

164."

ANGLE VISES ä Adjust from 0 -90 ". Grooved steel '! jaws for holding round or tapered j

5/8” Wide slider. Aluminum construction.

V 16

2-1/4"

SALE PRICE UNTIL MAY 22, 1993 4” 4" 3-5/8" 6 5" 5" 5-1/4" 12-1/2 6” 6" 5-3/4" 14-3/4

Width Jawsof

1-9/16"

DRILL PRESS VISES__

Size Jaw _______ Width

Depth Jawsof

1-3/8”

■

69”

Floor Model Bench Model Mini Bench 16 16 5 5/8" 5/8" 1/2" 13" 13" 8-3/16" 63” 38" 23" 3” 3" 1-7/8" 7 7 2.5

Speeds Chuck Swing

6’ BENCH QRMOER Direct drive motor with no brushaa or balta to replace, permanently lubricated motor baarlnga, adjustable a hatter reslatant plaatlc aye ahlelds, removable whaal covers, adjustable tool raeta, 3,460 RPM, rocker awltch, 6 ft cord, CSA certified. WL 24 lbs. 3408101 ....................

pieces. 2-1/2" ANGLE VISE 3432010 .................... 3-1/2" ANGLE VISE. 3431863 ....................

34”

39”

POWER DRILLS HEAVY DUTY DRILLS

jßj * I MODEL #0228-1

I (C) 1/2" HEAVY DUTY ELECTRIC DRILL - • Variable Speed/Reversible • 3 Amp Motor • 0-650 RPM * Heavy Duty Industrial Chuck • All Ball and Roller Bearing and Helical Cut Heat Treated Gears.

MODEL #0234-1

3415999......................................

(A) 3/8" VARIABLE SPEED REVERSIBLE DRILL - 0 to 1,000 RPM. 3.5 Amps. Heavy-duty chuck and powerful Milwaukee built motor. 3412244 .......................... (B) 1/2" H.D. VARIABLE SPEED REVERSIBLE DRILL 0 to 850 RPM. 5.4 Amps. Qulk-lok detachable cord for tangle free carrying and storage. 3412236 ..............................................

185"

(D) HEAVY DUTY HAMMER DRILL KIT - • Variable Speed/Reversible • 5.0 Amp Motor • 0-2,500 RPM • 0-50,000 BPM • All Ball and Roller Bearings • Heat Treated Gears and Impact Mschanlsm. Kit Includes steel carrying case with tray and 4 percussion carbide tipped bits. 3416013...

159"

229"

199"

CORDLESS DRILL KIT VARIABLE 2-SPEED DRILL - 0 to 350 RPM, and 0 to 1,000 RPM. 6-Posltlon adjustable clutch. Range of 11 to 156” lbs. of torque. Reversible. Fast action keyless chuck gives positive grip on bit. KIT INCLUDES: drill, battery, charger and metal carrying case. 3412251

279"

12 VOLT RECHARGEABLE BATTERY. 3412285 .......................................................

74.99

A. MODEL #1410 (A) 3/8" VARIABLE REVERSIBLE DRILL - • 0-1,800 RPM. • 2.7 ami Professions motor • Heavy duty quality chuck. • Built-in belt clip.

MODEL

89"

3416476

#2219

<B) TWO-SPEED HAMMER DRILL - 5.6 amp, 1,100 low RPM, 2,800 high RPM. Blows per minute: Low 22,000, High 52,000. Capacity In wood 1-1/8” - 3/4"; In steel 1/2” - 3/8"; In concrete 3/4” -1/2” u -rr\ ao 3413572 ................................................179"

MODEL #1113R

...................159*

MACHINISTS HIGH SPEED STEEL DRILL SETS 115 PIECE HIGH QUALITY DRILL SET - With Index Box - Set Includes 29 drills 1/16’ to 1/2’ in 1/64’ Increments, 60 number bits, 26 letter bits. Decimal equivalents and tap sizes are marked on index box. Box measures 13-1/4* x 4-1/2’ x 2-1/4’. Wt. 8 lbs.

3409364 .................................................................................................................

129"

29 PIECE DRILL SET with INDEX BOX - Sizes of 1/16" to 1/2" x 1/64” variation. Panels are hinged and fold into box.

* DRILL SHARPENING JIG No special skill required . . . anyone can quickly resharpen drills to factory accuraL cy. Adjustable for all common drill \jg angles and countersinks. Resharp' 'ens drills from 1/8" to 3/4". d

Wt. 2-1/2 lbs. ^4 3403631 ..

19"

— 3403979

29.99

DRYWALL SCREW ADAPTER Changes your power drill into an automatic screwdriver. 1/4' hex shank. 2921633-Pkg. of 2 .........

ELECTRIC GRINDERS and ACCESSORIES jePSON

(A) 7* SUPER DUTY GRINDER • 15 Amp High Torque Motor • Comes complete with accessories • 6.000 RPM ■ All Metal Body • 5/8" i 11 NC Thread Spindle. 3415973 ........... (B) 4-1/2" DISC GRINDER - • 5 amp motor • 11,000 RPM • 5/8" Spindle Thread.

POWER AT HAND I

219"

B MODEL 424SN

119"

3411329 ........................ motor (C) 4" MINI GRINDER • 5 amp • 12.000 RPM. • Spindle Thread 5/8" 16NC M10X1.5. 3415197 ........................ (D) 1/4" ROTARY DIE GRINDER • 5 amp motor • 25,000 RPM • Features all ball bearing construc tion. Made tor Industrial performance. 3410057

109"

MODEL

169"

DEPRESSED CENTERSSave GRINDING WHEELS (42%

H.D. WIRE CUP BRUSHES

SIZE (Inches)_______

(Inches) A

2-3/4

2-34

Thread Size

ITEM

M10x1.25* 1*10x15“

3414216 3414224

5/B--11

A B'

5 2-3/4

2-3/4

Mi 0x1.5“ 5/8',-2ir

5/B"-11

" 5/8”-11 ' M10XÏ725*

PRICE

A24R

18.39

3414257

20.99

3414182

15.39 15.39 15.39 31.79

3402963 3416096 3402955 3418153

12400

3419181

SALE PRIC P UNTIL MAY 22, 1993 'À24N - Fast stock removal

SIZE (Inches)

JtlI Now you can have permanent identification on all metal tools, sporting goods, wood and on glass! Adjustable for wide or fine line engraving. 120V AC, 7-1/2" long. 7,200 strokes per minute. I 099 3404381 ......................................................................... I O

Dla. 6-7/8". 3,000 RPM min. 4,500 RPM max. 2" Wide. 1" Bore. 3410214

ITEM

Pipe Pipe Pipe Pi ipe P pe C2 4R

13,500 13,300 12,200 8,500 6,600 13,500 13,300 8,500

3416104 3416112 3416120 3402021 3416138 3416179 3416187 3416195

PRICE

2.99 3.79 3.99 4.49

6.49 2.99 3.99 4.99

*C24R: Silicone carbide use on masonry, stone and some cast iron.

Size (Inches)

Type-

Max. RPM

4-1/2 x 3/32 X 7/8

A24R

13,300

3402880

A24R 8,500 7 x 3/32 x 5/8 SALE PRICE UNTIL MAY 22, 1993

3402807

ITEM

PRICE 3.99 5.29

........... 2.99

7400

3402740

84»

C24R 8,500 7 x 3/32 x 5/8 SALE PRICE UNTIL MAY 22. 1993 .

3416146

5.29 2.99

8 x 3/32 x 5/8

SAIT

STRAIGHT CUT-OFF SAIT WHEELS

120 Grit. Stationary

A24R - Long life

MAX. RPM

‘PIPE: Ideal for cutting and light grinding of ferrous metals.

4.99

2.89

...........3.49

TYPE*

C24R C24R

3.99 4.49 4.99 5.99

3401965 5.99

DEPRESSED CENTER CUT-OFF WHEELS 4 x 1/8 X 5/8 4-1/2 x 1/8 X 7/8 5 x 1/8 x 7/8 7 x 1/8 x 7/8 9 x 1/8 x 7/8 4 x 1/8 x 5/8 4-1/2 X 3/32 X 7/8 7 X 1/8 X 7/8

ITEM PRICE

13.500 13.500 12.200 8,500

1249

3414190 34Ï42Ô8

24"

A24N A24N A24N A24N

SALE PRICE UNTIL A2-1R MAY 22, 1993 8,500 7 X 1/4 X 7/8

3414232

8” FLAP WHEEL

« 5/8 1/4 x 5/8 x 7/8 x 7/8

MAX. RPM

5 X 1/4 x 7/8

----- 3414240

PENCIL ENGRAVER

4 * 1/4 4-1/2 x 5 X 1/4 7 x 1/4

TYPE*

1249'

■For use with Wolf 4594, Makita 98501 “For use with Black A Decker SAG-500-550, Sktl 4246-04

^•Mtr

sait

SA.IT

A24R

*A24R - Long life. Ferrous metals. *C24R - Silicon carbide, concrete, stone, brick, etc.

METAL CUTTING SAWS 12”& 14” CUT-OFF SAWS

SAVE 00

70on

S®50

341133^

____ J

14” CUT-OFF SAWJEPSON MODEL 9114. Max. dapth of cut 4", 3,800 RPM, output 2 HP, 14 amp AC/DC motor. Cut-off wheel Included. 3411337-REG. 299.99 SALE PRICE UNTIL

MAY 22, 1993 229" if

jepsoN

12” CUT-OFF SAW JEPSON MODEL 9112-Max. depth of cut 4”, 3,800 RPM, output 2 HP, 14 amp AC/DC motor. Cut-off wheel Included. 3412939 ........................................

279"

jepsoN

12” DRY CUTTER SAW JEPSON MODEL 9312. ■ Carbide tipped blade makes dry

jcpson JEPSON MODEL 9115 • Powerful 15 Amp (3.5 HP) AC/DC motor has all ball bearing construction. 3,500 RPM. SPECIFICATIONS: Cutting capacity @ 4-1/8” x 6-1/2"; @ 45'-4-/18” x 4". Arbor 1” WL 40.9 lbs. ABRASIVE WHEEL INCLUDED. 3415635 ................................................

HEAVY DUTY SAWZALL® 2 SPEEDMODEL 6511 •2,400/1,700 Strokes per minute

“ 7*

razor sharp cuts In a wide v ariety of ferrous metals • Cuts three times as fast as conventional abrasive cut off saws. SPECIFICATIONS: 15 Amp high torque motor. Power Input 115 Volts. 1,500 RPM, O'all. Dim.: 13-9/16" x 22-7/16" x 14-3/16". 8.2 Ft. cord. Net. Wt. 41.8 lbs.

599"

12” REPLACEMENT BLADES - 60 Tooth. 3410594 ..............................................................

H.D.INDUSTRIAL CHOP SAW WHEELS

179.99

ESTAIT

12" X 3/32“ X 1” “IRON WORKER" CHOP WHEEL Aluminum oxide grain. For structural metal applica tions. Fast cutting. Use on angle Iron, channel Iron, heavy rebar and other ferrous metals. 3460066 9.99 ea. 14” X 3/32” X 1" -STUD KING" CHOP WHEEL Aluminum oxide grain. General purpose cutting. Fast, cool cutting. Burr free finish. Ideal for use on metal studding, thin rebar, and light gauge metals. 12.59/ee. ■ 3409703 .......................................................... ...,| 14” X 3/32” X 1” “SAITECH" CHOP WHEEL Excellent on all stainless steel. Formulated with patent ed 3M Cubltron grain. Combines fast cutting with extrsmely long life. Cool cutting reduceds discol oration. Use on all ferrous metals. Out performs all other brands. 15.99/ea 3416203 16” X 3/32" X 1” “IRON WORKER" CHOP WHEEL Same specifications as 12* "IRON WORKER" shown above. 14.49/ea. 3401163 je;

14” SUPER CUT-OFF SAW

CUT-OFF WHEELS 6.99/ea.

3410545 - 14" X 7/64" X 1" 3415965- 12" X 7/64” XI"

5.99 ea.

■ Length of Stroke 3/4" • 4 Amp Motor • Plunge cuts - Needs no starting hole. ■ Adjustable Pivot Shoe • Metal Case and Seven Blades. 3416005 ..........................................

VARIABLE SPEED SUPER SAWZALL®

209" MODEL 6527

Similar to above except Dual Range variable speed. Low range 0 to 2,000 strokes per min. High range 0 to 2,800 strokes per min. 8.0/6.5 Amps. Detachable qulkIok cord. 3412269

279"

HEAVY DUTY ELECTRIC SHEAR MODEL 6850 Cuts round, square or Irregular holes. Head swivels 3600. Capacity 18 gauge steel, 20 gauge stainless steel. Cutting speed 15 ft. per min. Min. radius 7". Trigger speed control lets you start slow and Increase speed for long unobstructed cuts. * 3412277 ................

229"

rGLUE STICKS e 7/16" x 3-7/8“ long. Package of 10. 3800174

V1*w

MIG WELDERS aCEEid

BONUS ALL WELDER PURCHASES NOW INCLUDE COUPON FOR REGULAR

25% OFF

PRICES FOR YOUR WELDING WIRE OR ELECTRODE1M3I PURCHASES

Typ« A

Easy Mlg

Dual Mlg 120 Gas/Gaalesa

Input VollHt

Current («mp«)

Duty Cycle

O’all. Dim (Inchaa)

110V

40-65

65A (15%) 60A (18%)

14 5 » 8 x 14 5

30-120

120A (18%) 8.25 * 14.25 x 17.75

110V

(lbs.) 44 57

0110841

396.00

0110800

624.00 700.00

90* (40%) CDual Mlg 140 D

170

Gaa/Qaslaaa ________

12x205 x 30.75

0110817

Gas Only 220V 30-170 170A (16%) 32.7 x 21.25 x 27.2 ___________________________ 150A (20%)

220V

30-140 14QA (12%) ___ 120A (20%)

106

0110658

STEEL CENTRE

MIG WELDING WIRE Typ« MÏld Steel (E-70 S-6)

Slza .024

Wt 2

Mild Steel (E-70 S-6) Mild steel (E-70 S-6)

.030 .035

2 2

ITEM PRICE 0141754 6.99 0141747 0142372

6.99 6.99

Wt.

ITEM

10 10 10

0142380 0142398 0142406

PRICE 27.9» 24.99 22.99

0142455

64.99

Flux-cored mild steel ____________________ .030 2 0110775 23.99 (F71T-G.8.)_________ _________ We carry popular sizes of angle Iron, cold rolled Hat, sheet steel, round and square steel, rectangular and square hollow tubing, rebar and expanded metal mesh. Available In 4 fL to 10 ft lengths. Check Out Our Competitive Prices!

iS DIODE e

r Rating 275A 300V, Size 3/4” threaded end. Size mounting hole 3/8". [99 l O all. Length 6-3/4". \0140616 ...............

Flux-cored mild steel (F71T- G.S.)

.035

0142414

19.99

Aluminum and stainless steel wire also available.

HEAVY DUTY CUTTING and WELDING KIT This unll provides medium and heavy duty work. Cutting cap. up to 6”. O \ A 99 0110742 .........................................................

“UNIWELD” WELDING and CUTTING OUTFIT SIMILAR TO ABOVE KIT - Designed for medium duty welding, brazing and heating jobs. Cutting capacity 4". Comas complete less case. 0110478

304"

WELDERS t

)

r c Input Voltage

Gaalesa*

110V

90-105

110V 230V 230V

190-110 230 AC 140 DC 50-230

No. 2130

Gas*

2140

Output Volt«

Type

SALE PRICE UNTIL MAY 22. 1993 Gas/Gasless 2150 AC/DC Arc 2233 2230 AC Arc

B C C

Welding Capacity (steel)

(lb.-)

3/16” to 20 ga.

65 75

1/4" to 26 ga. 3/8" to 26 ga. 1/4” one pass 1/4" one pass

PRICE

ITEM

0110023

569.99

0110031

849.99

0110049 0110445 0110833

934 99 529.99 329.99

............... 699.99 108 101 80

“Can be converted to gasless In a matter of minutes.

* Optional Conversion Kit to convert to gas Is available.

WIDE RANGE OF ACCESSORIES ARE AVAILABLE! 220 VOLT M.I.G. WELDERS

INFINITE HEAT and WIRE SPEED CONTROLS

iwa

n it

(A) Ideal body shop M.I.G. Trim design that fits easily In tight work bays. It welds from thin "Ti gsuge sheet ÏS, matai to thick H i 5/16" steel in a H( single pass.

BONUS ALL WELDER PURCHASES NOW INCLUDE COUPON

FOR 25% OFF

REGULAR PRICES FOR YOUR WELDING WIRE OR ELECTRODE ' «I PURCHASES IN 19931

(B) Powerful M.I.G. welds from thin 26 gauge sheet metal to thick 3/8’ steel in a single pass.

>.>

J B

Made in U.S.A.

STOCKED ONLY IN: Mississauga, Winnipeg, Saskatoon, Regina, Calgary, Edmonton, and Grande Prairie. Please order direct or through your nearest Princess Auto store.

Model

Primary Amps

Duty Cycle

Output

Wire Size

O'aU. Dim. (h* xw* x d*)

Wt. (IbS.)

ITEM

PRICE

f217S

20.5/18.5

100% Tapering to 20%

130 Amps

.024* .030"

40* * 17-1/2* x 39*

172

0110064

1519.00

100% Tapering to 60%

225 Amps

38-1/2* X 21* X 47*

264

0110072

2079.00

«2225

44/40

.035* .024 to .045*

WELDING ELECTRODES Arcrlte # E6011

Size (dia. x Igth.)

E6013 E7014 E7018

* 10 LB. PACKAGE

3/32* x 12* 1/8* x 14* 3/32" X 12* 1/8" X 14* 3/32" X 12" 1/8" X 14* 3/32* X 12* 1/8" X 14’

ITEM 0141283 0141291 0141309 0141317 0141325 0141333 0141341 0141358

“ 8 LB. PACKAGE

PRICE/11 lb. pkg. 25.99 21.49 25.99 21.49 26.49* 21.49 21.49“ 21.49

METAL BOX 2-1/2"W X 15-1/2"H X 4-1/2’D. Hinged front cover with keyed lock. Mounting tab at top of box. Beige In colour. VWt. 9 lbs. 4 >^3890571 ...........

19”

y21

SANDBLASTERS

SANDBLASTING HOOD

(A) HEAVY DUTY SANDBLASTER - 96 lb Capacity Tank - Operating air prwaeura from SO to 150 PSI. Kit comas complete with ceramic nozzle power gun. container with hose hanger, 10 IL hose, aseortad air (eta, 6" wheels for easy movement. Air consumption 5 CFM continuous. 8320S19 ........................................................................................................ (B) SIMILAR TO ABOVE - Except SO lb. capacity and no wheals. 6320428 ........................................................................................................ (C) PRESSURE BLASTER - Pressure blaster Is equipped with Quick-Release Deadman Valve that stops Immediately If the operators grip slips or It Is dropped. 125 PSI working pressure, 100 lb. abrasive capacity. WL 52 Ibe 6320501 .................................................................................................... REPLACEMENT NOZZLES ARE AVAILABLEI

Heavy duty vinyl with toll material lining. Lara* 3-1/2" ■ I" viewing area. Haar mash vant far operator comfort. Complete with plexiglass lana. Ona alia nta ah. •320444 ......................

24«

1 2.95

139" 999'

SILICA SAND

429"

Available for sandblasters In PRINCESS AUTO STORES.

BLAST-VAC SANDBLASTER In |ust one simple application the BLAST-VAC propels the abrasive at a high velocity right Into crevices and pitted areas than vacuums away the rust paint and debris. A 19,500 RPM vacuum turbine system sucks dust, debris and abrasive back Into the Blast-Vac. Abrasives are separated and returned for continuous reuse. SELF-CONTAINED ABRASIVE Abrasive consumption Is reduced by at least RECrCUNU SYSTEM 92%. Operates on 115 VAC 000 watts. Requires a compressor with 75-150 PSI and 8 to 20 CFM. For continuous duty 15 CFM at 125 PSI is required. The power vacuum can also be used as a Shop Vacuum.

79900

6320568

BLAST-VAC ABRASIVES For use with above sandblaster. 60-80 grit. Since the Blast-Vac recovers over 92% of the abrasive It lasts 10 times as long. 25 LB. PAIL 6320576 .....................................................

44.99

SPOT-TYPE SANDBLASTER

BLASTING GUN offiQ An economical sandblasting tool! Use with a compressor and your own container. Comes complete with gun with ceramic nozzle, steel pickup tube, 10 ft abrasive hose, air Jets, and hex key wrench. WL 3-1/4 lbs. 6320360 ........................................................................... SANDBLASTER NOZZLE KIT - Con tains one replacement ceramic nozzle, a 5/64" and 3/32" air Jet, a rubber packing and an o-ring. 6320535 .........

7.99

REPLACEMENT CERAMIC NOZZLE.

6320006

2.69/e.

RUBBER GLOVES

This SAND BLASTER Is a compact slzs yet Ideal for many |obs. The gun has automatic sand recovery. KN includes: gun, four nozzles for different shaped surfaces and 2 lbs. of abra sive. 6320642 ......................................... REPLACEMENT NOZZLE.

6320691 .................................... LIMITED \ QUANTITY

STRONG INDUSTRIAL QUALITY GLOVES - CHEMICAL RESISTANT. Size 10. Length 16" 5040142 ....................

12 "wy

REPLACEMENT WORK HEAD. 6320741 - 4 Pee. Set ................ REPLACEMENT AIR JET 6320782 ........................................

69" 5.99 7.99

1.99

PRECISION MEASURING TOOLS VL-,

6” CALIPERS

SUMMIT

y ~ " iff A

(A) PLASTIC CALIPER - 1/16” and 1mm graduation*. 26700S1............................................................................... 2.89

B -

% l

(B) PLASTIC VERNIER CAUPER - With dial gau g*, sbe 0-6“, 10-150mm. 2*71000...............

24.99

f c

(A) 8" VERNIER CAUPER. 2970648 ................................. (B) 6" VERNIER CAUPER. 2970630...................................

39.99 34.99

(C) 6" DIAL CAUPER. 2970663 ................................. (D) 0-r MICROMETER. 2970655 .................................

59.99 32.99

LOCKING PLIERS . V

BAR CLAMPS

(A)

ITEM

Size

2924140 2924157 2924165 2924173 2924181

12" 18" 24"

36"

PRICE

21.99 24.99 27.99 29.99 32.99

(B) 4 PCE. CLAMP ASSEMBLY KIT - Contains one corner bracket, one corner pad, and two full-face pads. 2924199

10.49

•Àt:

- jj

SET INCLUDES: 5”, 7” and 10". Locking Pliers with r Wire Cutter Jaws. Wt. 2 lbs. 2921641

PRINCESS AUTO carries a wide variety of vise GRIP'S; Locking pliers.

(A) Available In 6 sizes 4" to 10" with straight, curved and long nose jaws, with or without cutters. PRICED FROM 10.99 to 16.99 (B) SHEET METAL TOOL - 8" long. 2911774 ................................................. (C) WELDING CLAMP - 9” long. 2911782 ................................................. (D) LOCKING CHAIN CLAMP and PIPE WRENCH 19" chain. 2911808

18.99 21.49 31.99

(E) LOCKING “C" CLAMP - 11" long. Wt. 29 oz. 2911790 ......................................................................... (F) 8" BENT NOSE LOCKING PLIERS

2920767 ..................................................................

3 PIECE PLIER SETS

14«

ams

LONG NOSE LOCKING PLIERS SET - Includes 6 in., 8" and 10” pliers. Wt 2-1/2 lbs. 2919827 ..........................................

2199

3 PCE. LOCKING "C" CLAMP and WELD CLAMP SET

20.99 15.99

OTHER TYPES OF VISE GRIP«) ARE ALSO AVAILABLE!

SAWS

Includes 8" sheet metal clamp, 9" welding clamp and 11" “C" clamp. 2919751 .................. 3 PCE. LOCKING ."C" CLAMP PUERS - Includes: 6", 11" and 18" damps. 2919635 ..................................................................

21.99

HAND SAW - 7 Teeth per Inch. 26 Long.

2945376 :......................................................

14.99

COMPASS SAW - 9 Teeth per Inch. 14" Long blade.

2945368 ......................................................... BACK SAW - 13 Teeth per Inch. 14" Long.

2945350 ...........................................................

6.49 10.59 6.19

COPING SAW - With 5 replacement blades. 2945384 ................................................................ REPLACEMENT COPING SAW BLADES. 2945343 pkg. of five 3.09

MINI CLAMP For delicate clamping ol piaatlca, wood or metal while bonding or fastening. Rubber tips.

3" long. 3432259

23.99

INDIVIDUAL SNAP RING PLIERS

3 PIECE AVIATION TIN SNIP SET Left cut, straight cut

STYLE (A) (B) (C) (D)

ITEM

PRICE

2921464 2921575 2921732 2921492

Straight nose Internal Straight nose external Bent nose external Bent nose Internal

6.69 6.69 6.69 869

29"

4 PCE. SET - One of each of the above. 2922656 ........................................................

SOCKET SETS

Ä «

and right cut Wt 2-3/4 lbs. 2920965

19"—« PLIERS

VQ f

CHROME VANADIUM (A) BID NIPPER PLIERS.

11.69 7.99 11.99 7.99 8.99 3.79 4.59 5.69

2929637 ................................................ (B) 6' LONG NOSE PUERS 2929629 ..................................................... (C) 6* LINESMAN PUERS 2929611 ..................................................... <D) S' DIAGONAL Cl/TTMQ PUERS (D) 7* DIAGONAL CUTTMQ PUERS 2929646 ..................................................... (E) 6' SUP JOMT PUERS

2927663 ................................................ (E) 6' SUP JOtfT PUERS Pce*.

Dr. Size (Inches)

ITEM

PRICE

3/16" -1/2" 4mm - 11mm

2920510 2920528

27.99 27.99

3/8" - 7/8" 9mm - 19mm

2920494 2920502

38.99 36.9»

7/16"-1-1/4" 10mm-27mm

2920445 2920452

51.99 51.99

1/4,3/8

3/16" - 3/4"

2920601

25.99

1/4.3/8

5/32"- 7/8" 4mm - 19mm

2920627

51.99

1/4, 3/8, 1/2

3/16" -1-1/4”

2920643

109.99

22 22

1/4 1/4

21 21

3/8 3/8

17 17

1/2 1/2

22 47

2927661 ................................................

Sizes

(E) 10' SUP JONT PUERS 2922664 .....................................................

PLIERS

£ZM3 SOCKET HOLDERS (A) 9-1/2" TONGUE and GROOVE PUERS. 2929073 ................................................................ (B) 7-1/2” LONG NOSE PUERS. 2917557 - FOR 1/4" sockets..................................... 2917565 -For 3/8" sockets ..................................... 2917573 - For 1/2" sockets...................................... SET OF 3 HOLDERS - Sizes: 1/4", 3/8” and 1/2". 2919611 ...........................................................................

1.89 1.99 2.59 4.49

2929081 ................................................................ (C) 8” DIAGONAL CUTTING PLIERS 2929099 ................................................................ (D) 9” LINESMAN PLIERS 2929115 ................................................................

15.99 18.99 17.99 28.99

CROWFOOT WRENCH zfflQ

CROSS PEIN HAMMERS 9 PIECE SET - sizes: 3/8" to 7/6", and socket holder. 2922839Wt. 1 lb

16.99

2 LB. 2940328

9 PIECE SET - Metric sizes: 10 to 22mm, and hotder 2923965 .........................................................................

16.99

HEX KEY SETS (A) 10 PIECE SET - Sizes: 1/16" thru 3/8". Wt. 1/2 lbs.

2922250 ..........................................................................................

5.99

(A) 10 PIECE METRIC SET - Sizes: 1.5mm to 10mm. Wt. 1/2 lbs. 2922243 ...................................................................................................... (B) 11 PIECE SET - Contains 5/64" to 1/4” hex keys. T-15 and T-20 Torx drive. WL 1/2 lbs.

5.99

9.99

2919819 ..............................

(C) 25 PIECE SUPER LONG HEX KEY SET - Chrome Vanadium steel. Sizes: 10mm. 12 long arm SAE 1/16” to 3/8" Thirteen short arm metric 1.5 to

6.99

2919330

30 PCE. H.D. MULTI-PURPOSE SCREWDRIVER SET

10 PCE. SCREWDRIVER SET with HOLDER

VCS

'r~fj

2929354

49" 2-WAY HAND RIVETER with RIVETS

ADJUSTABLE WRENCH

Use at 45 or 90 angles. Includes 3/32", 1/8”, 5/32", Locks on four sides of a nut or bolt as well as opposite corners tor a firm, secure grip. Covers 32 nut sizes (7/16" to 1-1/8”, 11 mm to 28mm). 2923064.........................................

10-5/8” 15 PT. PULL SAW/HANDSAW

3/16" nose pieces and 100 rivets.

_________________ ■MMMH______ ___

COMBINATION WRENCH IP SETS Pieces

Pull-stroke provides more accurate controlled cutting - without splintering, giving the finest finish cuts.

2923043 ..............................................................

22"

INC

NEVJ

4” 20 pt pull saw, 8 pt. breakaway blade utility knife and 78" tape measure ail In one tool. 2923068 .....................................................................

Sizes

14 14

1/4" -1-1/4" 6-19MM

1/4-1"

6- 19MM 3/8*-5/8" 8-12MM

5 5

3 IN 1 TOOL TAKAG TOOLS

19"

2922672 TAKAG TOOLS INC

VS ITEM

2919603 2925055 2920668 2920015 2918746 2910107

PRICE

34.99 34.99 26.99 26.99 8.99 8.99

BOX END WRENCHES 5/16" x 3/8". 2928943

OTHER SEES AVAILABLE!

V 25

(F) -BIG RANGE" FILTER WRENCH - Rtmovti any fHter up to 6" di»

2922193

8.49 8.79 8.79

(A) ONE MAN BRAKE BLEEDER. 2991081

(G) “SWIVEL GRIP' OIL FILTER WRENCH. 2919876 - RANGE 3-1/2” to 3-7/8”

(B) 3/8“ BRAKE CALIPER SOCKET - For GM disc brakes.

2919884 - Rang» 2-7/8“ to 3-1/4* (H) LARGE SWIVEL GRIP OIL FILTER WRENCH Rang« 4-1/8“ to 4-1/2*. 2990188 ......................... (I) LO CIRCUIT TESTER - Chock both AC and DC cur rant up to 120 volts.

2990174

3 99 (C) 30MM FWD AXLE NUT SOCKET - For 1/2“ dr. 2990141 10.99 (D) PROFESSIONAL TORX BIT SET - Six smaller btta are 1/4* dr.; thraa larger bits are 3/8* dr. Sizes: T-10 to T-60. 7944023 (D)T-60 TORX BIT 2922342 ...................... (E) TUBING BENDER 2928018 ......................

31.99 6.29 15.99

9.99 7.99

2990182 ..................

(J) DELUXE FEELER GAUGE - 31 Bladoa, alzsa .0018“ to .038“ plus ona brass Mods slza .010*.

2990117 ......................................................

7.29

(K) IGNITION MODULE WRENCH - For 7/32’ hex retaining bolts on Ford Ignition modula.

2990190 .....................................................

5.99

PRINCESS AUTO carries a wide selection of Lisle Specialty tools. For complete selection, check our large catalogue or visit your nearest PRINCESS AUTO store

MEASURING DEVICES

o fHbk

• Staats v*** -

(A) STUDSENSOR - LED light display signals the loca tion of stud edges from which the joist centre la detsrmlned.

2940369

29.99

k-j :

(D) WATER LEVEL 2944965 ................... (E) ELECTRONIC WATER LEVEL - Easy one-man opera tion over long distances, or around comen. 28 Ft. hose. 2940377

10.49 49.99

(B) TAPE MEASURE - OPEN REEL FIBERGLASS TAPE 100 ft. x 1/2". 2944254

(F) TORPEDO LEVEL - Uses a display with three LEDS and an audio tone to indicate level of plumb 2940385..............................................................

(G) 9” MAGNETIC TORPEDO LEVEL 2944304 ............................................................

22.99 7.49

64.99 4.99

PULL-TYPE SPRAYER

sprayer to pull behind your ATV or garden PUMP: 12 Volt DC diaphragm pump. 7 Amps. 1.8 GPM. Built-In check valve. Adjustable 0-100 PSI. Self-priming up to 8 ft suction. Can run dry without damage. TANK: 15 Gal. polyethylene tank. BOOM and NOZZLE: Two nozzles spaced 40” apart Spray coverage 80” to 144". WHEELS: 4.KV3.50 - 4 tubeless pneumatic tires.

2T777

5740006

SEEDER/SPREADERS

ELECTRIC MODEL 12 Volt DC motor. Seeder can be attached to almost any vehicle. • Three bushel metal hopper • All construction steel welded • Variable speed control permits sowing of all types of seeds. Allows uniform spread up to 30 ft 2410462 REG. 414.49 SALE PRICE UNTIL MAV 22, 1993

299"

Ideal lor seeding pastures and cover crops, spreading granular fertilizers and other granular material.

PTO MODEL W This model fits any Category I - 3-pomt hitch and is driven by the 1 -3/8’ Power take-off of the tractor 3-bushel metal hopper. 2410470 - REG. 446 99 SALE PRICE UNTIL

. k

/^ ]

\ ^ )

\ » 1

J /

13 ■■■

MAV 22,1993

329"

CARPENTER S ACCESSORIES SEEDER/ SPREADER Attach this seeder/spreader to your ATV or other vehicles • One bushel polyethylene hopper won’t ruait, corrode, crack or bend • A snap on hopper lid to prevent high cost material from blowing out or to keep moisture out of the hopper • A 12 volt elec tric motor with a variable speed control. • An aluminum fan • A mud and water shield to protect the spreader fan • Wl 30 lbs. 2410496 — LESS MOUNTING KIT

379"

(A) INDUSTRIAL BELT - Made of 8-10 ounce lahgo leather. 1-1/2" In width, with heavy roller buckle. 7943405

9.99

(B) ELASTIC SUSPENDERS - Made 0« heavy duty eiaetlc, supports and distributes weight equally. Strong steel clasps for holding up pants or work pouch, 2944221 ..................................................................... 12.99

SCREEN and KEYBOARD

2940229 .............................................................■10.49

(0) ALL WEATHER JOURNEYMAN S CARPENTER APRON - Made of heavy water repellent split leather. 5 nail pockets. Center pocket lor tape or other tools. Steel hammer holder. Leather pencil holder Suspender dips Leather belt 2940211 .................

44.99

PRINCESS AUTO - YOUR AIR COMPRESSOR and ACCESSORY SPECIALISTS U

(A) 208/230 VOLT MOTOR

5 HP SINGLE STAGE COMPRESSORS

(B) 230 VOLT MOTOR

A B C

Voltage

Air Delivery 40/90 PSI

208/230 230 230

12.7/10.6 CFM 12.2/10.2 CFM 11.6/9.4 CFM

Max.

Tank

PSI 120

Capacity

125 125

O'aM. Dim LxWxH Inches

23 x 23 x 66 23x23x60

60 gal 60 gal.

—*

23 x 23 x 66

All our AIR COMPRESSORS meet all required Federal and Provincial regtulatlons (l.e regi SORSI stared tanka where required and C.S.A. Approved). WE SELL ONLY APPROVED AIR COMPRES

GAS ENGINE AIR COMPRESSORS

EAGLE*

----------* ' »6P ^

ENGINE A B

AIR DELIVERY

CAPACITY

5 HP Honda

11 8 CFM 9 40 PSI 9.4 CFM • 90 PSI

8 gal.

8 HP Tecumseh

17.1 CFM • 100 PSI

14 gal.

60 MINUTE TIMER SWITCH Set for up to 60 minutes. Shuts off sfter time Is up. Rated 15 Amp. 120-240 VAC. 1/3 HP 120-240 VAC. Housing measures 2-1/4" dla. x 1-1/4". 0700781

28.

ITEM

PRICE

0411835

1029.99

0410066

1259.99

AIR TOOL OIL Especially engineered for the care of all piston-type and rotary air tools. 500 ml size 6437008

3.49

- THE BROADEST SELECTION FROM THE WORLD'S LEADING MANUFACTURERS - BACKED BY OUR ROYAL SERVICE PROMISE - NO SALE IS FINAL UNTIL YOU'RE SATISFIED. - IF WE DON'T HAVE IT - WE LL GET IT!

2-1/2 and 3-1/2 HP COMPRESSORS

5 HP “M SERIES” AIR COMPRESSOR

DIRECT-DRIVE OILLESS

..yr—

É&3Ü

« The "M Series” maintenance tree 5 HP twin URES: cylinder oilless compressor.

STANDARD FEAT • High Performance • Functional dual head covara provide directional air cooling vanta and are air Intake muffler« with reueable eaay accès« filters • Horizontally opposed cylinders use helical gears resulting In alower speeds, quieter running and longer life. • 208/230 volt single phase electric motors with dual start/run capacitor design for longer life • Integrated regulator control panel features a unique bullt-ln • Dual analog gauges for tank and working pressure • Heat and Impact resistant housing covers working parts and hot surfaces • Quick attach chrome handle on the portable model • Full 1-year warranty SPECIFICATIONS: 12.0/9.5 CFM • 40/90 PSI. Max 120 PSI 20 gal. tank. 5 HP. 208/230 volt. 0410704 .........................................................

549"

3 HP PORTABLE AIR COMPRESSOR

IVIAC join Rugged dependable portable compressor. Oil bath, belt driven compressor.

7.9 CFM O 40 PSI. 6.5 CFM O 90 PSI. Max. 120 PSI. 115 Volt. 20 Qal tank. Manifold designed with built-in shut-off valve. Tank pressure gauge. 1/4" Air pressure regulator and gauge. 0411496

49099

• Integrated control panel with bullt-ln regulator • Dual analog gauges for tank and working pressure • Maintenance free, no oil required. Pump cover houses the filter for easy access, functions as a muffler/intake manifold and provides ducting system for directional air cooling • 120 PSI max. pressure operates most auto motive type tools *115 volt HP

CFM & 40/90 PSI

2-1/2 3-1/2

».2/6.2 S.8/6.7

Tank Cap. ITEM PRICE (9«l)________________________ 13 30

449.99

0411439

499.99

AIR COMPRESSORS “CAST IRON” SERIES The “CAST IRON” SERIES Is designed for the heavy do-it-your selfers and profession als who demand a rugged and reliable air compressor. • Solid cast iron pump for great durability • Heavy duty cast Iron flywheel for long life • Reliable belt-drive operation • Splash lubrication to keep com pressor running smoothly • Maximum pressure 125 PSI •115 Volt.

HP A

1-3/4

2-1/4

CFM « Tank Cap. Wt. 40/90 PSI (gal.) (lbs.) 11 5.5/46 125 20 7.2/56 156

RUBBER MOUNT

All our AIR COMPRESSORS meet all required Federal and Provincial regulations (l.e. registered tanks where required and CSA Approved). We sell only approved compressors

0411348

I 1 die. x 3/4 rubber mount with I 1/4" threaded studs. O'all. length I 2-1/4". V 4 per package VM90597 ..

349/pkg.

ITEM

PRICE

0411942 0410977

399.99 529.99

ÈÜf \Bt 29

OILLESS COMPRESSORS • No Lubrication Required For Pump - Virtually Maintenance Free • Direct Drive - No Belts or Pulleys or Bulky Belt Guards • Fewer Moving Parts - Means Fewer Potential Problems • "Ollless" Compressors Are More Streamlined,Compact - Take Up Lees Space end Weigh Lees Yet Otter Years ol Reliable Service

• Each Ollless Unit Features A Usage Chert Advising Its Multitude Of Ueee. Toots and Equipment That Can Be Run Oft Of Them and AI Whet Air Pressures Everything Should Be Done At For Maximum Efficiency • 115 VoH AC • Air Hose and Tire Chuck Included On Most Models

nenn

s^E00 50

■

B 3/4 HP PROFESSIONAL CONTRACTOR

A 3/4 HP POWER PAL

D. 1-1/2 HP PROFESSIONAL CONTRACTOR

Type

Tank Cap. (gal)

100 100 125

7.5 7.5

3/4 1 3/4

CFM & 40/M PSI 2.7/2.0 4.0/3.0 2.5/1.9

Max. PSI

LUI

125

2x2.0

Os*. Dim. L'*r* H25-1/21 14-1/2 21-1/2 33115122

4.0

ITEM

(»») 55

0410*41 0411554 0411124

55 40

IS x 15 x 20

0412072

15-1/2 x 19 x 15-1/2

AIR COMPRESSOR TANKS

^v:

• 20 and 30 Gallon Units Come With Stub-Wheel Axles • 60 Gallon Unit Comes With Three Welded Legs • All Three Are Painted Red and Come With PlatasMotor and Pump Mounting

Capacity (Q4l«-)

IV t -

30 20

Tank Six# (Inches)

Mounting Plats (Inches) 14x25 9x24

23 X 60 15 X 36 14x30

5 X 24

Max. Allowable Pressure

ITEM

PRICE

140 PS 165 PSI 165 PSI

0430525 0430511 0430503

279.55 225.95

®THOMAS tit*

I This portabla tank dolly Incrsases high prsssure air storage and |ob-slts maneuverability. Two 3-1/2 gal. tanks. A wide variety of compressors can be attached to the Jt telescoping base. Kit ILb Includes quick dlsconnects, connector hose, hold-down straps and hardware for easy set cB up. Storage cleat for Pi hose and cord. Tool

115 VOLT AIR COMPRESSOR Max. 60 PSI. 1/3 HP, 115 Volt, 3.5 Amp, 1,725 RPM motor. O’all. Dim.: 13" x 7" x 11". WL 25 lbs. 0411967 ..

119y

196 55

PORTABLE TANK DOLLY

255 55

N Vs

ASM E REGISTERED

225 95 279.55

319.99

SALE PRICE UNTIL MAY 22, 1993

■

255.55

hanger. 10" x 1-3/4"

Compressor not Included

0430052

299"

5 HP AIR COMPRESSOR

EAGLE*

Light Industrial - High Volume - 17.1 CFM @100 PSI • No Magnetic Motor Starter Required • Maximum Pressure 140 PSI • Rugged 5 HP Dual Capacitor 208/230 Volt 25 Amp Motor • One Year Warranty • Rugged Heavy Duty Cast Iron Pump with Three Independent Cylinders For Cooler Operation • Finned Intercoolers For Cooler Running and Longer Valve and Ring Life • Each Cylinder Has Its Own Filter for Maximum Performance (Inexpensive Replacement Filter Elements Available) • Eye Level Easy Read Oil Level Indicator • Easy Service Oil Drain Plug • High Efficiency Reed Valves for Longer Life • Special heavy duty 5 HP, 25 Amp pressure switch • Large cooling fan for efficient heat removal • Heavy duty metal belt guard. 60 Gal. ASME registered tank. Outlet valve included. Wt. 340 lbs. 0412007 - REG. 1099.99 SALE PRICE UNTIL MAY 22, 1993

899"

All our AIR COMPRESSORS meet all required Federal and Provincial regulations (i.e. registered tanks where required and C.S.A. approved). WE SELL ONLY APPROVED AIR COMPRESSORS.

HEAVY DUTY 2-STAGE COMPRESSOR TWO-STAGE COMPRESSORS are normally used in pressure ranges up to 100 PSI for continuous service and 150 PSI for Intermittent service. A is compressed In a larger low pressure cylinder then passed through a cooling coll to a smaller high pressure (PSI) and great air volumes (CFM) than single phase compressors. Also the Two-Stage Inner cooling system gives cooler air which extends pump life. SPECI FICATIONS:

à"

• MOTOR: 5 HP, 230 Volt • AIR DELIVERY: 18 CFM • 100 PSI 16 CFM e 175 PSI • TANK CAPACITY: 80 Gal. •SIZE: 64' x 21" X 47".

1599”

• WT. 455 lbs. 0411280 ....

MAGNETIC MOTOR STARTER

AUTOMATIC SWITCHES

PORTABLE AIR TANKS

PRESSURE SWITCH - For Air Com pressor and other pressure equipment. Pressure range 20-200 lbs. Differential 25/50. Rated for motor to 5 HP 1/4" NPT fittings. Wt. 3 lbs.

Price 43" . on 0432179

0430256 ...............................

7 10 14

10 x 15 11x18-1/2 12 x 20 12x28

56.99

release SAME AS ABOVE - With 2-way valve for load-less starting. Wt. 3 lbs.

0430264 .................................... . mp

The perfect answer when you need compre tan ssed air in remote locations for small jobs. These ks are an excellent reserve air source for cleaning and Inflating. 125 Max. PSI. Tanks come with gauge, hose, and tire chuck. Cap. Size Shpg. Wt. ITEM PRICE U S. (gals.) (Inches) (lbs.)

ist-

149.99

Introductory

• *:*sp*«k

Required for above Two-Stage Compressor.

0411298

^****«k

20 22

26 35

SALE PRICE UNTIL MAY 22. 1993

0432153 0434621 0433847 0432179

41.98 49.99 62.99 69.99

............ 43.99

19.99

SAME AS ABOVE - But equipped with unloader valve for (oadless starting.

24.99

0430298 ..................

/bridge

[ RECTIFIER

REPLACEMENT GAUGE - For above air tanks. 0430553 ....................................................................... REPLACEMENT MANIFOLD - For portable air tanks. 0433383 11.99

7.89

w 59.99

PRESSURE SWITCH - For Air Coi ressors where pressure dose not exceed 150 PSIl R aled for motors to 1HP 1/4" NPT. Wt. 1 lb. 18.99 0430280 .............................................. SAME AS ABOVE - But for use where pressure does not exceed 100 PSI with On-Off Switch. 0430306

Measures 1-1/8" x 1-1/8".

10 AMPS.

0708339 .....................

COMPRESSOR PUMPS SINGLE STAGE COMPRESSORS PUMPS

2” x 1-1/2"

2-1/2" X1-3/4"

10-1/2"

2-1/4” x 1-3/4”

10-1/2”

1,000

2-1/2” x 2”

10-1/2”

1,250

2-1/2” x 1-7/8”

10-1/2”

1,100

850

0411730

* A Section single groove pulley ** A Section double groove pulley

REPLACEMENT AIR FILTER - For above pumps. 0438804 - 1/2” NPT thread..........................................

4M.M

6.99/ea.

SINGLE STAGE COMPRESSOR PUMPS

No. Cyt. A B C D

2 2 1 2

Borax Stroke 2-3/4” X1-5/8” 2-3/4” x 2” 2-3/4” x 1-1/2” 2-3/4” x 2”

Wheel Dla. 10” 10”

Bell Ball

8-3/4’ 10”

Bushing Bushing

COMPRESSOR PUMPS

Req. HP

CFM® 40PSI

2-3 2-5 1/3- 3/4

8.5/7500 10.6/750 2.8/500 8.0/585

CFM.@

Oil

Wt.

B0PSI 11.5/1050 13.8/1150 4.9*60 11.5/840

Capacity

Lbs.

ITEM

PRICE

37 39 25 40

0411307 0411512 0410423 0410738

289.09 329.90 208.09 320.09

18 18 17 16

oz. oz. oz. oz.

(A) TRIPLE CYLINDER COMPRESSOR PUMP - Caat Iron head. Pump has the same features aa single stage pump on the 5 HP Eagle compressor Item 0412007. SPECS: Max RPM with a 3 HP motor la 900 RPM for a deliver of 12.5 /14.0 CFM @100 / 40 PSI. Max. RPM with a 5 HP motor la 1,230 RPM for a deliver at 17.1 /18.7 CFM @100/40 PSI Max. Continuous operating praaaure 115 PSI. Max. Intermittent 150 PSI. 10-1/2” double groove pulley. Wt. 75 lbs. 0411629 ........................................................... . (B) TWO-STAGE INDUSTRIAL COMPRESSOR PUMP - Cast | Iron Head. Centrifugal Unloader. Sturdy finned caet Iron ' cooling and finned caat Iron aftercoolar. Case mechanlte crankshaft. 17” pulley. Bore 4-1/8’ on low pressure. 2-1/8” on high pressure. Stroke 3-1/2” on both. Delivers 14.8 CFM @ 175 PSI @ 540 RPM with a 3 HP motor. 23.5 CFM @ 175 PSI @ 845 RPM with a 5 HP motor. Wt 210 lbs. 0411645 ...............................................................................

519”

729”

AIR TOOLS PRINCESS AUTO SELECT Professional Quality Tools for the Tradesman. These tools are built to meet the demands of professionals. The "Select" Logo is your assurance that you have purchased a tool you can depend on.

(A) 1/2" DRIVE IMPACT WRENCH - 3*0 Ft./lbs. of torque. 7,500 RPM Average air consumption 4.0 CFM 9 *0 PM. Air InM 1/4" NPT. Ml 6054 (B) 3/4" DRIVE IMPACT WRENCH - »00 FL/lbS. Of torquo. 4,200 RPM. Average air consumption 1JS CFM it B0 P9I. Ab In 1st 1/4" NPT. 3416062-REa 1MM SALE PRICE UNTIL MAY 22. 1M3 (C) 1" DRIVE IMPACT WRENCH - 1,100 FL/lbS. Of torquo 3,600 RPM. Avorago air consumption 10.0 CFM & 90 P9L Requires a 10 HP Compressor with tank. Air Mat 1" NPT. 3416070 419.99

99.99

ALL SELECT AIR TOOLS CARRY A ONE YEAR WARRANTY!

149.99

(D) 3/6" DRIVE AIR RATCHET WRENCH - 50 FL/lba. of torquo. ISO RPM Average ab consumption 40 CFM 9 90 PSI. Air Inlat 1/4" NPT. Suggests* boss alts 3m’ I.D. 3411246

(F) 3/6" REVERSIBLE AIR DRILL - 2,500 RPM Average air conaumptlon 4.0 CFM 9 90 PSI. 3/6"24 Spindle thread site. Air Inlet 1/4" NPT. Suggested hose site 3/6" LD.

(E) AIR HAMMER - Medium length barrel. Use with standard .401" Parker taper shank chisels. 3.000 Blows per minute. Average air consumption 4.0 CFM 9 90 PSI Inlet 1/4" NPT. 3416047 ..............................................

(Q) 1/2" REVERSIBLE AIR DRILL - 500 RPM Average air consumption 6.0 CFM • 90 PSI. 3/6’-24 Spindle thread size. Air Inlet 1/4" NPT. Suggested hose size 3/6" I.D. 3415940

59.99

34.99

AIR RATCHET KITS

3410160

1/2' KIT - Includes 7 sockets sizes 3/6" to 3/4".

.................... 79.99 3/1" KfT - Includes 7 sockets sizes 3/6" to 3/4" 64.99 3414612 ........................................................................ RATCHETS ONLY 1/4" AIR RATCHET.

3407699 ................................................................ 3/6" AIR RATCHET. 3407176 ........................................................................ 1/2" AIR RATCHET.

3407053 ................................................................

39.99 34.99 49.99

69.99

89.99

ftfÉlZjaj

wM/4" AIR DIE GRINDER KIT K> contains: Ab operated die grinder, 1/4' and 1/2" collet chuck, 10 grinding stones, tarn wrenches. Speed 22,000 RPM Ab consump tion 3 CFM Ab pressure »0 PSI 3414620

49"

3407166 - Die Gbtnder Only ....29.99

FOAM PAD Measures 6" long » 4” dta. 1" dia. hole. Firm black foam. 3890522 .............

AIR IMPACT WRENCHES V'

n (

ërë.

Jgm

1 YEAR WARRANTY (C) 1/2" LONQ SHANK IMPACT WRENCH - 2-1/7* Shank • Air Conaumptton 4 5 CFM « M PSI - Max. Torque 0 90 PSI la 200 FULbe. • 7.000 RPM 3410230 ................................................ (D) 3/0* PALM GRIP IMPACT WROICH - ».000 RPM Iraa speed. 2.1 CFM atr consumption. 3407736 ..............................................

(A) HEAVY DUTY 1/2* DRIVE IMPACT WRENCH • 230 FULba Max, torque • 4.5 CFM Air Conaumpllon. 3407244

34.99

69.99

(8) HEAVY DUTY 3/4* DRIVE IMPACT WRENCH • 700 fL/lba. max. torque • 7.5 Air Conaumpllon. 3407673

179.99

34.99

HEAVY DUTY IMPACT

Mn SOCKET SETS SHALLOW SOCKETS Size 1/2" 1/2"

No. of Length Sockets standard standard

10 10

ITEM

PRICE

UNIVERSAL JOINT IMPACT SOCKET SETS 3/8" DRIVE SAE - Sevan sockets sizes: 3/8", 7716", 1/2", 9/16", 5/8", 11716", and 3/4“ 3411287

49.99

12" DRIVE SAE - Seven sockets sizes: 1/2*. 9716", 5/8”, 11716", 3/4", 13716", and 7/6" 3411279

59.99

UNIVERSAL IMPACT JOINT SOCKETS 1/2" DRIVE 3407814

6"/ea.

IMPACT EXTENSION BARS 1/2" Drive. 3", 5" and 10" 3415312 ..............................

uhilQ -j ß99

For use with 3/8" Dr. impact wrenches Hex bits fit into 3/8" dr. anvil. Includes: five slotted bits sizes 3/18" to 1/2", five Phillips bits sizes »0 to 64,

1/2" 1/2"

DEEP SOCKETS

No of Length Sockets «Map deep

11 11

Sizes ITEM PRICF _________________ _

MT-1" 3410685 49.99 10mm-24mm 3415932 49.99

anrf& IMPACT SOCKET SETS j'b-POfNT SOCKETS - METAL STORAGE BOX

ONE YEAR WARRANTY Drive Size

No. of Length Sockets

1/4" standard 1/4" standard

8 8

Sizes

ITEM

3716"-7716’ 5mm- 11mm

3415096 3415080

3/8" standard 8 5/16" - 3/4" 3/8” standard 8 8mm - 19mm 3/8" deep 8 5/16"-3/4" 3/8" deep__________ 6 8mm-19mm

PRICE 8.99 6.99

3409513 13.99 3409323 13.99 3406390 19.99 3409331 19.99

1/2" standard 10 7/16" -1* 1/2" standard 10 11mm-24mm 1/2" deep 10 7716"-1" 1/2" deep_________________ 10 11mm - 24mm

llAgiAA

3406416

29 90

3/4" standard 3/4" jdMp

3414760 3414778

79.99 89.99

standard

8 8

1" -1-1/2" 1"-1-1/2"

1"-2"

3401155 3407796

19 99 19.99

3414828 112.99

IMPACT SOCKET SETS

3/8” DRIVE IMPACT STRENGTH SCREWDRIVER BITS

3413010

Drive Size

7716"-1" 3410677 34.99 10mm-24mm 3415924 34.99

3/8" DRIVE. 2924975 ....

CHROME MOLY 6-POINT SOCKETS METAL BOX LIFETIME WARRANTY

'” * I ^

Sizes

12«J

Fifteen 38 PIECE SHALLOW SET 3/8* drive metric and SAE sockets. Nineteen 1/2" drive metric and SAE sockets. Two extension, 3/8" to 1/2" adapter and plastic carrying caae. 3414802 ......................................................... 38 PIECE SHALLOW AND DEEP SET - Sixteen 3/8" drive deep metric and SAE sockets. Twenty 1/2" drive shallow matrlc and SAE sockets. 3/8" x 1/2" adapter and metal case. 3414810 .....................................

64.99

79.99

IMPACT TORQUE SOCKET SET 8 PIECE SET - Includes four 3/8" sq. dr. sockets (E10, E12, E14, E16): three 1/4" sq dr. socketsJE6. E7, ES)

anemone storage rack.

1 3"

AIR HAMMER KITS

AIR DRILLS

1 YEAR WARRANTY' (A) 3/1" ANGLE AIR DRILL - Jacob« chuck. 1,*00 RPM Iraa ipaa<L 3415270 ...................................................... . 119.99 (8)3/»" AIR DRILL - Jacob« chuck. 2,000 RPM Iraa «pood. 4 CFM air consumption. 34.99 3407104 ...................................

SPECIALTY AIR TOOLS

11 PIECE KIT0 Air chlsal« and spring raUlnar. WL 7-1/2 lb«. 54.99 3405271 ............. 0 PIECE KIT - Contain« 5-1/2* long ham mar, 6 «Ir chls al«, spring ratalnar and air fitting. WL 4-1/2 lbs. 39.99 34064Î0 6 PIECE KIT - Contains air hammar, 4 air chlsal« and spring ratalnar. WL 4-1/2 lbs. 18.99 3407005 .............................. PRINCESS AUTO OFFERS A 90-0AY WARRANTY ON POWERFIST AIR HAMMERS!

AIR SANDERS

1 YEAR WARRANTY!

(A) AIR OPERATED TEXTURING QUN - Spray most HquM dry «rail malarial« from Joint camant Is caking acoustics, «sail tsxtura, apattar, «ami-log or any othar sprayabla malarial that srll faad through tha hoppar by gravity 3406053 82.99 (B) UNDERCOATING GUN - 1/4* NPT InpuL 7/32* LO. nozxla. 0432377 36.59 (C) AIR NIBBLER - 3.500 RPM Iraa spaad. 4 CFM air consumption. 69.99 3414755 ...... (D) AIR RIVETER - Sat blind rtvsts up to 3/16ln. dis. 3/15*, 5/32*, and 1/5* Nosa plaça Includad. 4 2 CFM air consumption.

79.99

340(143 ...... (E) AIR SPEED SAW KIT - Includes lour blades lor cut ting wood, plastic, metal, and tubular metal. 1/4* NPT air Inlet. Wt 4 lbs. 74.99 3407723 .............................................. REPLACEMENT BLADES - For above. 7.99 3414567 ......................................

(A) DUAL-ACTION RANDOM ORBITAL SANDER 7,500 tion. RPM Iraa speed. 5 In pad. 6.6 CFM air consump 3407251 34.99 (B) 5* HGH SPEED SANDER - 20(000 RPM. AS CFM air consumption. 340726»....... . 34.99 (C) STRAIGHT UNE AIR SANDER - Dual piston 3,000 stroka par minuta. 1* stroka. Usas 2-3/4* » 7-3/4* papar. 5 CFM air consumption. 74.99 3406192 ....................... (D) ORBITAL JITTERBUG SANDER - 3-1/2* X 7* pad. 3/16* orbit stroka. t,000 RPM 6 CFM air consumption. 3407277 34.99

SVlU>U

DPDTTOGGLE) SWITCH

10A e 250 VAC. 15A © 125 VAC. 3/4 HP -120V-240V. 1-1/4" x 3/4" x 1” housing. Fits 5/8" dia. hole. . mounting V 0701M

FILTERS, REGULATORS and LUBRICATORS A

l. i » t * » C *

GENERAL SPECIFICATIONS: • Maximum Working Pressure ISO PSI • OPERATING TEMPERATURE: 60 C • Fittara have 60-80 micron nitration and acraw-type drain • Bowie on fitters and lubrtcatora are acetate. 4 ox. capacity • Regulators are diaphragm type.

Type

Port Slxe (npl) Regulating

1/4"

1/2"

1/4"

1/2"

Finer

Filter

1/2"

1/4"

1/2"

1/4"

1/2"

1/4"

0-150

0-150 40

1/4" Finer/ Regulator Regulator Regulator Lubricator Lubricator

0-150

Rw»9»(P*0___ Min. Operating Flow {pal)______

sxrstzr Normal Working Preaaure (pal) Wt. (Iba.f

ITEM PRICE

' b 'I" «

A 1/2"

1/4-

0-120

1.5

1.56

0-120

2.5

0470609 047025? 0470278 37.99 33.99 j 66 99

1/2-

1/4’

0-120

1.3 0470617 42.99

1/4"

0-150 40 1/4’

40-120

1.4 : 1.66 0470260 0470625 36.99 4199

40-120

1.76 0470266 335 99

1/41/4" Finer/ Finer/ Regulator/ Regulator/

40-120

44 0470294 92.59

1/4"

0-150 40 1/4* 40-120

3.6 0470393 99.99

1/2” FILTER, REGULATOR and LUBRICATOR Higher capacity for larger compresaors. Max. working pressure 150 PSI. Operating temperature +40°F to +140 F (+5 C to +60 C). Bowl material polycarbonate with metal guard. Body material aluminum die cast. 1/2” NPT ports. Can be bushed down to 3/8". (A) 1/2” FILTER. 44.39 0470484 ........................................................... (B) 1/2" REGULATOR.

53.99 49.29

0470492 ..................................................... (C) 1/2" LUBRICATOR.

0470500 ....................................................

AIR FILTER

AIR REGULATOR

AIR FILTER Rated to max. 150 PSI and

max. temperature of 125’F (52 C). 1/4" NPT porta. 0470088

999

For removing materials from air lines. Operates in the 0-150 PSI. 0-10 CFM range. Easily remov able filter element. Complete with drain valve, clip and 1/4" NPT ports. WL 3 6m. 0470021

38 99

Adjusts and maintains air pres eures from 0-150 PSI. Equipped with heavy duty diaphragms and polypropylene valve mecha nisms. Capacity 0-10 CFM air flow, with 0-160 PSI gauge and 1/4" NPTports Wt 4 Ibe

0470013

46 99

DPAnV MA DP ■■ CMU I -IV1ML/C

AIR HOSE

• Braided Reinforced For Use Up To 250 PSI . Flexible/kink Resistant • Oil Resistant • Weather Resistant • Designed For Lasting Service. 3/8" hose with 1/4" NPT male fitting on both ends.

1/4” hose with 1/4" NPT male fitting on both ends. Length

ITEM

25 ft.

0431940

ITEM

PRICE

14.99

0433276

2T99

PRICE

50 ft.

0430389

27.99

0431924

40.99

100 ft

0430397

50.99

0431932

81.99

POLYURETHANE COILED AIR HOSE

1/2" with 1/2" NPT male fitting ends. on both ITEM

PRICE

0431874

38.99

0431965

75.99

AIR HOSE

lAL

• 3/8” Hose • 3/8” Male Ends. This 3/8” hose has 3/8” NPT male ends to handle higher volumes of air. Rated up to 250 PSI. 0431908 - 25 ft.........................................

22.99 43.99

0431916 - 50 ft .....................................

Length Hose Size 1/4" 5/16"

20 ft. 25 ft

Fittings

ITEM

PRICE

1/4" NPT 1/4" NPT

0434480 0434498

29.99 59.99

AIR HOSE This high quality air hose is made In the USA. It is 3/8" hose with 1/4" NPT male ends. 0430058 - 25 ft.......................................

NYLON COILED AIR HOSE

24.99 46.99

0430066 - 50«. ............................... 1/4"FITTINGS MALE NPT Length

ITEM

12 Ft. 25 Ft 50 Ft

0430975 0430983 0430991

3/8"FITTINGS MALE NPT

PRICE

Length

11.99 16.59 25.09

25 Ft. 50 Ft.

ITEM

0430934 0430942

BULK AIR HOSE

PRICE

25.99 41.99

200 PSI. 5714266-1/4”

.........49e«.

5714274-3/8”.

........590/ft.

AIR CHUCKS

COUPLERS

"KWIK-CHANGE' COUPLERS - Used with all air operated equip ment such as : Blow guns, tire inflators, paint sprayers, air ham mers, air drills, greasing equipment.

STYLE

fikirom 1/4" NPT Female body, 0431742

5.59

•MW

[

1/4" NPT female body. 0431

6.29

1/4" NPT female body & 1/4" NPT male plug. 0430140

6.29

ÿ «LB uij

5.59

* *

» 1 t 5 y Z* i =s»u«Utiife/t-K jW"»”* s' ?

1/4" NPT Male body. 0432708

STYLE

” > iJ

mm:

1.19

1/4” NPT female plug

, 0430710

1.39

"KWIK-CHANGE" *A” COUPLER - Designed to interchange with Aro Style Couplers 1/4" basic size • Push Type: Plug engages auto matically • Steel Body: With hardened steel plugs. Rugged, durable.

■1

From 239 to 3"

1/4" NPT male plug. 0430157

LARGE COIL SPRING

1/4" NPT male plug. 0431767

Rated to 6,200 lbs. 15/16" diameter steel.

1/4" NPT female plug. 0431775

O'ail. Dim.: 9” X 18”. 2080133

1.79

9" PRINCESS AUTO has a complete selection of other styles and sizes of Air Couplers. Check our large catalogue or visit a PRINCESS AUTO store in your area.

PAINT SPRAYING EQUIPMENT SPRAY GUNS (A) LOW PRESSURE SPRAY GUN - Bleeder typ« with adjustable fluid control, and Internal mix pressura feed 1,2mm Fluid nozzle. 1 Litre cup. 30-50 PS! Working pressure. 1.6-4.0 CFM air con-sumption. Requires 1/3 HP or larger compressor.

41 59

0450163 ....

(B) LOW/HIGH PRESSURE SPRAY GUN - Will work at a broad pressure range without chang -------------------------------jp. ing any pa rts.1.2mm Fluid nozzle 1 Litre cu 30-120 PSI Working pressure. 1.6-4.0 CFM air consumption. Requires 1/3 HP or larger com pressor. 0450155

70"

(C) HIGH PRESSURE SPRAY GUN - Is designed to be worked with either gravity or auction cup. Comes equipped with a 1 litre suction-type cup. 1,2mm Fluid nozzle 40-90 PSI Working pressure 1.6-4.0 CFM air consumption. Requires 1/3 HP or larger

72"

GRAVITY FED SPRAY GUN 1

HIGH PRESSURE SPRAY GUNS

Ç-e*«ance

0.45 Litre gravity cup sits on top of the spray gun. External mix type gun. 2.0mm nozzle tip. Requires

(A) Beautiful little ‘fine finish* gun with 9 oz. gravity fed cup. High pressure fine atomization gun with stainlesa steel needle and air, fan and paint regulator. 0.8mm fluid nozzle. 40-90 PSI working pressure. 1.6-4.0 CFM air consumption. Rsqulres a 1/3 HP or larger compressor. 0450148-REG. 75.99 SALE PRICE UNTIL MAY 22, 1993 .........

4999

TOUCH-UP GUN Ideal for touch-up spraying, edg ing and shading. Use for precision detail spraying. Cup holds 1/4 litre of paint. Air Coneumption 3 CFM, Air Pressure 30 to 50 PSI, Air Inlet 1/4” NPT. Tip of Nozzle 1.8mm. Wt. 1.2 lbs.

0450387 .

75"

(B) Similar to (A) gun except It has a slightly larger gun and handle. It can also be used with a auction-type cup. Equipped with a 9 oz. gravity fed cup 1.2 mm fluid nozzle. 40-90 PSI working pressure. 1.6-4.0 CFM air consumption. Requires a 1/3 HP or larger compressor 0450122

81"

at least a 1-1/2 HP compressor and 40 to 50 PSI. 0450015 WAS 129.99 CLEARANCE REPLACEMENT CUPS ARE AVAILABLE FOR POWERFIST SPRAY GUNS!

AIR OPERATED SPRAY GUN PROFESSIONAL QUALITY NONBLEEDER TYPE GUN - Spray all types of material. Features a quick disconnect canister for easy change of paint and easily con verts for use with material tank.

0450049

99"

l,jiv. !W

HOBBYIST AIR BRUSH

HOBBY GUN Operates with any portable tank or tank type compressor. Durable dle-cast construction and adjust able material and air nozzle. Comes complete with nozzle cleaning tool. Shpg. Wt. 8 oz. 0470104 ..........

26"

External mix air brush with adjustable air control capable of spraying a line as narrow as 1/16" wide. Material jar has lock-on feature to prevent accidental separation. JM INCLUDES: Air Brush, 8 Ft. Air Hose, fli 1 oz. Paint Jar, Bleeder and NonBleeder Knobs, and Medium Nozzle. Wt. 1 lb. 0470203 ...........

45"

ALL OUR PAINT SPRAY GUNS CARRY A ONE YEAR WARRANTY.

hi. '

POWER WASHER

BLOW GUNS (A) STREAMLINED BLOW GUN. 7.69 0430405 (B) SAFETY LEVER BLO-GUN. 0431718 10.99

.■J

(B) RUBBER NOZZLE BLO-GUN. 0432591

11.49

V-4

For um with an air compressor Attach one hoaa to a water tap and the other to a 1 HP Air Compreaeor and get 175 PSI spray Excellant for cleaning bams, 0432823................................. machinery and shop doors. 4«» « Qgg

8.99

0430009

(D) KIT. SIPHON SPRAY BLO-GUN 0431726

19.99

(E) PISTOL GRIP BLO-GUN. 15.59 0433110

COMPRESSOR ACCESSORIES

(A) AIR VALVE - Excellent for admitting air into air tanks and pumps used on pneumatic water systems. 1/8" NPT connection. 0430033....

1.99

(B) BRASS SHUT-OFF VALVE - 1/4 In. NPT female x 1/4” NPT male. 0430041 ........... (C) 1/4 In. BRASS DRAIN COCK - For compressor tanka.

5.79 89C

0430090 ...................................................................... (C) 3/8” BRASS DRAIN COCK. 0431973.......................................................................

1.39

(D) CHECK VALVE - 1/4 in. NPT. 100 PSI max. 0430207.......................................................................

8.69

(E) ASME CSA POP SAFETY VALVE - Preset, tested and sealed at the factory. Pressure setting 150 PSI. 0430215 ........................................................................ (F) COMPRESSOR MANIFOLD -.C/W one 1/2" NPT female port for connecting to air tank and four 1/4 in. NPT female ports for air hose, check valve, pressure switch, pressure gauge. 1839 0430520

14.99

SAFETY HOODS B

sa^e\

35-/

(A) SPRAY PAINT HOOD - With an air supply mask. Requires a fresh, claan supply of air. Built-In regulator to control air volume. Quic k disconnect airline. Keeps users cool. 5041068 ..

99.99

REPLACEMENT LENS - For spray paint hood. 5040274 ...

2.99

PLASTIC AIR FILTER 1.5CFM Porta are 7/8 In. O.D., 3/4* I.D. Body measures 3-3/8 In. (Da. x 4" long. O’aR.

saar...1“

(B) SANDBLAST HOOD - With an air supply mask. Requires a fresh, clean supply of sir. Built-in regulator to con trol air volume. Quick disconnect air line. Keeps users cool. 5041074-REG. 124.99 SALE PRICE until MAY 22, 1993 .....

89"

REPLACEMENT LENS - For sandblast hood. 5040324 5.49

49.99

REPLACEMENT LENS - For chemical hood. 5040274 ........... REPLACEMENT GAS CARTRIDGE For chemical hood. 5040282 3.99/aa.

2.99

S GEARHEAD MOTOR 1/4 HP 97 RPM MOTOR: 1/4 HP. 1,728 RPM, 120 VAC. 4.2 Amps. Continuous duty. GEAR BOX: Output 97 RPM. 1 :8 Ratio, 3/4’ Shaft 34-Tooth f35 Chain sprocket O all. Dim.: 13-1/2" x 8 In. x 8-1/2* Wt 35 Ibe. u. 0750331 ....................................................... 11

HAND CARTS

Capacity

«jrt»

WhMk

ITEM

PMCt

8" plastic 0* plastic I* caster*

2000102

40.00 00.00

10- I 3-

7«—»»72Q

70.00

10- I 310~ pneumatic

2040325

6"x 1-3/4"

2000044

Ob.) >00

i ooped handN Convertible

0001400 ______

600

2 Handled

600

l ooped handle

P-«yla HI Stach_____ 000 Appliance 700 2 Handled

1,000

»- » 2* rubber

70.00

70.00 140 00 00.00

*4.1011.50 I 4- - Air FDM Wheel Assembly

SPEED WHEELS

LARGE SWIVEL CASTERS

Size Ball bearings on wheel and swivel Air-Ailed tires. Top plate 4* x 4-1/2".

Tire Size 2.80/2.50-4 4.10/3.50-4 4.10/3.504

Ply

O'att. Ht.

4 2 4

0-3/8" 11-5/8” 11-5/8”

ITEM

PRICE

2041283 2041101 2041291

43.90 47.00 51.90

A Tire Size

A A A A B

2.80/2.50-4 4.10/3.50-4 4.10/3.50-5 5.30/4.50-6 4.10/3.50-4

O'all. Ht.

9" 10" 11" 14" 10"

r jjjj j I j

Bore

5/8" 5/B 3/4" 3/4”

5/8"

1/2" 1/2” 1/2

1-1/4 2-1/4 4 4

1/2” 1/2" 5/8" 1/2" 1«"

3-1/2 6-1/4 6-1/4 4-1« 8-1/4

2026201 2020295 2026177 2026038 2020303 2026185 2026046 2020311 2026103

Size

Capacity

ITEM 2027101 2027200

500 lb 550 lb.

WHEELBARROW/ IMPLEMENT WHEELS

WL Rating

fTEM

29S 350 375 560 230

2026334 2026342 2027126 2027134 2025609

(*•-)

50 60 175 175 80 200 200 80 150

ITEM

<«>•.)

C/W tube mounted on a

1 I

rim with 3/4” bore bearings.

29"

PRICE

8.00 13.40 10.40 21.40 16.00 20.00 23.00 10.00 27.00

Designed to handle higher load capacity. 3/4" Bora.

2020659 .

6" X 1-1/2" B" X 1-3/4” 8” X 2-1/2" 8" x 2-1/2" 10" X 1-3/4" 10" X 2-3/4" 10" x 2-3/4" 12" X 1-3/4" 12" X 3”

8” x 2-1/2" 10” x 2-3/4"

13X6.50X6 TIRE RIB THREAD $

Load Cap. Bor* (lbs.)

HEAVY DUTY SPEED WHEELS

SMALL TIRE and WHEEL ASSEMBLIES These tire assemblies are mounted with tubes on three piece rims with ball bearing*. Ideal for shop carts, dollies, etc. NOT FOR HIGHWAY USE.

Semt-pneumatic rubber composition Urea. Steel center. Ball beartnga. Centered hub.

PRICE

(each)

25.90 33.00 36.99 51.90 31.99

2-PLY 4.80/4.00 X 8 - Tire mounted on an all-metal pressed steel wheel. Roller 2999 bearings with 3/4" bore.

2020006 ......................... each

AXLE FOR ABOVE - 3/4" X 12”. 2061016 each 4.95 TIRE ONLY - 400 X B-2PLY TIRE.

19.99

2024685

GARDEN TRACTOR WHEEL ASSEMBLY 22.5 X 7.50 X 12 Tire mounted on a 5-hole rim. 2025922

5975

DISCOUNTS AVAILABLE IN QUANTITIES OF 20 OR MORE!

PRICE

1999 20.00

TRAILER/DUMP CART

NEW

Ideal to um around the yard with a garden tractor. Holds 15 cu. ft. (heaped), 12 cu. ft. (level). Heavy gauge ateel hopper measures 48" x 32” x 14”. 6.50-16" wheels. Recessed wheels for easy dump ing. Removable tailgate. All electrical welded one piece hopper.

259"

2060374........

CASTERS GENERAL DUTY CASTERS Wheel Size

Load Cap. (lbs.)

SWIVEL CASTER RIGID CASTER ITEM PRICE ITEM PRICE

90 2” X 1” 2-1/2” X 1-1/8" 100 270 3" X 1-1/4" 240 4" x 1-5/8"

2041119 2041135* 2040095 2040012

2.99 6.99 6.99 14.99

2041127 2041143 2040038 2040046

WHEEL ONLY BORE ITEM

1.99 3.99 5.99 11.99

3/8" 7/16"

2040061 2040079

PRICE

3.99 6.99

* Comes with side brake

LIGHT/MEDIUM DUTY CASTERS Wheel Size Load Cap. O'all. Ht. ________________________ ObeJ____________

3-3/4" 4-13/16” 5"

90 115

3" x 13/16" 4"x 15/16" 4" x 1-1/4"

200

RIGID CASTER PRICE ITEM

SWIVEL CASTER ITEM PRICE

2041010

5.99 7.99 9.99

2041036 2041150

3.99 4.99 8.99

2041028 2041044 2041168

MEDIUM/HEAVY DUTY CASTERS Wheel Size Load Cap. O'all. Ht. _______________(Ibr)______________

5" x 2" 6" x 2" 8” x 2”

6-1/2”

900 900

7-1/4"

9-1/2"

1,000

SWIVEL CASTER ITEM PRICE 2040715 2040020 2024057

26.99 29.99 54.99

RIGID CASTER ITEM PRICE 2040723 2040053 2024065

21.99 24.99 44.99

WHEEL ONLY BORE ITEM

1/2" 1/2”

PRICE

2040707 2040087

WUNDACAPS

THREADED STEM CASTERS

These wheel bearing protectors keep water, salt and dirt out of L 2 wheel hubs. Fully submersible ^-----In fresh or salt water. Measures 1-15/16". 2081693 - 2 per pkg.............................................

Swivel casters with a threaded stem. SeM-lubrlcati ting bearing, wheel. Soft rubber Wheel Size Size

2" X 7/8"

3" X 13/16" 4" X 15/16"

Load

Stem

Cap. (Lb*)

11.99 14.99

9"/pkg.

DYNA-TRED CASTERS

*l ITEM

3/8"-16" X1-1/2" 80 2041176 3/8"-16" X 1-1/2" 90 2041184 1/2"-13" X 1-1/2" 115 2041192

PRICE (each)

2.99 3.99 6.99

SCAFFOLDING CASTER 500 Lb. safe rolling capacity Hand or foot operated brak ing system locks both the

1-3/8 dia. x 4' stem Overall height 9-1/2" from floor to base of stem.

-«m\ / TYPE 4" Swivel Caster with brake 4" Rigid

ITEM 2040004 2040111

PRICE (each) 1499 11.99

M PCE. CASTER SET $1 Set Includes 2 rigid and 2 swivel casters with brake. 2-1/2” X1-3/16" wheel. O'all. height 3-1/8". Set of 4.

2041606 .... Individual Casters Available!

(D) 21 R 7-10

Tir» Only Tir» mounted on a 5-hol* wh*»l Tub» lor tir»

(A) 25 X 12.00-9

ITEM

Tir» Only

(B) 20 x 9.00-0 2026227/- ^ ^ Tir» Only Tub» lor tir»

(O) 22 R MO

(D) 22 R 11.00-0 Tir» Only SALE PRICE until MAY 22, 1993

PRICE

2025914 75.99 2020740 49.99 202 7043

Tir* mounted on a 5-hoi* wheel Tub* for tir*

ITEM 2027035 2020109 ITEM 2027027 2020740

PRICE 57.99 10 99 PRICE 79.99 49.99

2027043

2199

(D) 25 x 13,00-9

ITEM

Tir* Only ♦-hol* wh**l only Tub» lor Mro (D) 25 x 10-12

JToFIt Wh»»l 4-Hole 5-Hole 5-Hole Chev* 5-Hole Ford/Dodge*

Pilot Hol» (inch»»)

4 4.5 4.75

2.50 2.50 2.50 2.50

4.5

Capacity** Lb»./Hub 1,250 1,250

1.750 1.750

2020740 202 7043 ITEM

49 99 21 99 PRICE

2020600 00 99

--------------

r Mounted on a

HIGH SPEED STUB-AXLE ASSEMBLIES

PRICE

2020920 90.99

18 x 8.50 x 8 TURF SAVER TIRE

STUB AXLE-HUB ASSEMBLIES

Bolt Clrcl» (Inches)

56.99

ITEM PRICE 2020495 93.99

Tir* Only

ii2s

ITEM PRICE 2020227 70.99

2029245 91.99 2020109 19.99

(O) 24 R 9-11

WHEEL 5-Hol» 8" wheel. Flta all above 8" ATV tira». 2024925 -REG. 18.25 SALE PRICE until MAY 22, 1993 ...

PRICE

2020477 31 99 ITEM PRICE

Tir» Only

2025203 04.99 2020199 10.99

4-hol* wh**t only Tub» tor tir»

ITEM

Tire Only

ITEM PRICE 2025106 02.99

(A) 22 R 11.00-0

S-Hol» rim.

CQ99 M

2020691 ............... Ü3

Spindle Dla. x Lgth. (inches) 1-1/4 X 9-1/2 1-1/4 x 9-1/2 1-3/4 x 0-1/4 1-3/4 x 0-1/4

Stub Lgth.

(inches) 5.032 5.032 3.741 3.741

y ITEM

2000007 2000018 2090020

PRICE

41.99 51.99 02.99 02.99

*The Chev and Ford/Dodge lit most wheels to date as long as the bolt circle and the pilot hole match.

LOW SPEED IMPLEMENT STUB-AXLE ASSEMBLIES Use on Implements, wagons and trailers. NOT INTENDED FOR HIGH SPEED HIGHWAY USEI Bolt Circle (inches)

To Fit Wheel 4-Hole 5-Hole 5-Hole 6-Hole 6-Hole

Implement Implement Implement Implement Implement

5.5 5.5

Pilot Hole (Inches) 3.62 4.00 4.00

4.62

4.02

Capacity** Lbs./Hub 1,250 2,000 2,760 3.600 6,000

Spindle Dis. x Lgth. (Inc hat)

Stub Lgth. (inches)

1-5/8 x 10 1-5/8 x 10 1-3/4 x 9-1/4 1-3/4 x 14 21/8x14

5.638" 4.5801" 10.125" 7.802"

6.439"

ITEM 2080083 2080034 2080042 2080075

2080059

PRICE

51.99 02.99 62.99 02.99 83.99

** Capacity In lbs. par Individual hub.

E-Z LUBE HIGH SPEED STUB AXLE Simple to Uelntaln. Submersible. Keep bearings protected the easy way. Use the E-Z Lube Axle (End Unit) from Dexter. E-Z Lube design allows grass# to flow with EASE to both outer and Inner bearings tor a complete repack. It's E-Z because all you nsed to do Is attach a grease gun at the end and Insert the grease. No disassembly Is required! And E-Z Lube's end cap allows for easy access, extra protection and no mass.With such complete lubrication your running gear la protected from corrosion and water entry. E-Z Lube protection and maintenance features make It ideal for most any towable axle, whether It's for work or play. Give your running gear the protection and mainte nance advantage with E-Z Lube from Dexter.

To Fit Wheal 4-Hole 5-Hole

Bolt Circle (Inches) 4 4.5

Pilot Hole (Inches)

2.50 2.50

Capacity* Lbs./Hub 1,000 1,000

Spindle Dla. x Lgth. (Incite») 1.25x8.85 1.25x8.85

Stub Lgth. (inches) 4.18 4.18

ITEM 2090174 209019»

PRICE

39.96 49.99

•0

WHEELS 14* WHEEL to fit 3,500 tb. running gear. ’ 2020717........../ea. 15“ WHEEL to fit 3.500 lb. running gear. 202070» ........

44"/ea. I

2-3/8" Ola. round axla, 72" track, 58" spring canter, 5-leaf 23-1/2" springs, shackles, straps, u-botts, cast-bolt hubs. Fits most 14" car tires. 2080117 ...............

229" /

• NEW >SHOCK KIT - For 3,500 lb. axle.

20,0257 .......................... 84"

FENDERS

3,500 LB. CAPACITY RUNNING GEAR

RUNNING GEAR ^ with ELECTRIC BRAKES

NEW

7.5 X 23.5 FENDER - Tvwvs For up to 12” wheel. ' 2080216 ..................................... 9" x 31” FENDER - For 14" or 15” wheels. 2080224 .................................... 10.75” x 68" TANDEM FENDER - For 14" or 15" wheels In tandem. 2080232 .................................... 10.75” X 72" TANDEM FENDER - For 15" wheels. 2080240

11.99 14.99

SAME SPECIFICATIONS AS ABOVE - Except equipped with electric brakea. 2080125 ........................................

399"

DASH CONTROLLER - For uae with electric brakes. Activated by tow vehicles electrical system. -J QQ99

44.99

2,000 LB. CAPACITY RUNNING GEAR

44.99

REPLACEMENT COMPONENTS for 3,500 and 2,000 lb. trailers, as well as a wide selection of springs, tandem klta, and accessories are available!

: j

- Higher Capacity • 5-Leaf Spring • Eye-bolt End Can Be Used In Tandem SPECIFICATIONS: 1-1/2" ID. tubing 60” track. Complete with 5-leaf springs, shackles, u-bolts and ductile 4-bolt threaded hub with studs. Completely sssambled. WL 60 lbs. 2080778 ..........................

169"

2,000 LB. CAPACITY AXLE ASSEMBLY

TORrLsX

The Torflex suspension system features the progres sive torque action and independent wheel movement to provide the maximum in shock absorption and handling characteristics. INDEPENDENT SUSPENSION - No transfer of road shock from one wheel to the other for maximum stability in sud den swerves or adverse road conditions. '»j SMOOTH, QUIET - Totally cushioned in rubber with no metal to metal contact for maintenance free towing. SHOCK ABSORPTION - Provided by the natural hystere sis of the high quality rubber. LOW PROFILE - Mounted solidly to the frame the axle becomes a rigid supporting cross member with maximum road clearance. SPECIFICATIONS: 2.173 x .149 square tube. 60" track. 4 bolt hub with 4” bolt circle. 2080158 ....................................................................................................................................................................

New

HI-SPEED TRAILER TIRES and ASSEMBLIES SIZE

4.80/4.00 x 8 ITEM

Tire mounted on a 4-Hole Wheel

PRICE

4-Hole Wheel Only

2026755 2020576 2023232

39.99 27.99 11.79

Tire mounted on a 5Hole Wheel

2026888

39.99

Tire Only

2025971

13.69

PRICE

2026763 2020584 2023232 2026896

sale 5-Hole Wheel Only

5.30x12

5.70 X 8 ITEM

54.99 39 99 11.79

ITEM

2028771 2026805 2026912

PRICE

69.99 49.99 23.89

J6.5 X 6.5-8 ITEM PRICE 2026987 2020592 2023232

49.99 34.99 11.79

54.99 -

42.99_________________

202597?

13.8»

2025971

13.69

SALE PRICE UNTIL MAY 22, 1993

TRACTOR SEATS

(A) ECONOMY TRACTOR SEAT - Molded cushion, drawn steel pan with protective edge trim. Black vinyl cover. 2060366 - REG. 46.99 SALE PRICE UNTIL MAY 22, 1993 (A) DELUXE TRACTOR SEAT - Similar to above but aleo features air circulation design and water drainage. 2060358 ............................................................................... (B) HI BACK TRACTOR SEAT - High back, one piece seam less molded cushion with drawn steel pan and protective edge trim. 2060341 . (B) DELUXE HI BACK TRACTOR SEAT - A deluxe version of the above seel.

36"

64.99

These sects will fit most Indus trial commercial and farm equipment. Seats have a vari ety of mounting patterna. Check with your nearest PRINCESS AUTO STORE (o determine the seat required

75.99

2060333

96.99

ACCESSORY SPRINGS

HELPER SPRING KITS

FULL-SIZE PICKUPS and SPORT UTILITY VEHICLES

NOTE: AN Haltwtg Hetpar Spring Kits are daelgnad Ip increase the ‘Laval Load' carrying capacity ot your Vahi ds. Navar load the vehicle this unit la InataUad on beyond Mia manufacturer a Max. Croaa Varticle Weight Rating

FULL-SIZE PICKUPS and SPORT UTILITY VEHICLES FORD 2-WHEEL DRIVE

Spring

kit

Spring WdHti

2-1/2;

1963-72 C10, C20 W Rear Leaf Springe

2001263

2061269

1973-83 CIO, C20 Pickup 6 Suburban

2061271

2061266 2061269

2061263

1973-76 F100-F250 1677-ON F100, F180

2061271 2061289 2081297 2061^71 ~90t1366 [20>1267

1966-ON C1500

1977-79 F100, F150

2061263

2081289

2061297

1964-91 Suburban

2061271

2061269

4afe04k F2SA, PMO

2061263

2061266

2Ö61297

2061263

2061269

2061263

2001289

2061297

1973-63 C30 Truck Chaaala 1964-89 C30 Truck Chaaala

2061263

2061299

1989-ON 0100-0300

2061263

2061269

1966-75 1/2 - 3/4 2x4 6 4x4

2061263

2091299

2061271

2061299

2081271 2061271 2061271 2061271 2061271 2061271

2061299 2061299 2061289 2061299 2061299 2061289 2081289

1985-86 F250.F3S0

1964-96 F360 Cab & Chaaala

9061261 2061263

2061297

Mounting

1965-72 Fl00-F250

1966-72 F38Ö TR

2061269

Spring

. 2-WHEEL DRIVE CHEV. & GMC

Mounting Kit

30*1 JM 12091697 2061269

2061297

4-WHEEL DRIVE

2061263

~ wifi "t wwr

DODGE_________ INTERNATIONAL

1967-84 F100, F150 169687 F100-F150

2061271 2081289 2SÎ27Ï------2061299

2061297 2061297

1966-ON F100. F150

2061271

2061299

2081297

1967-79 F250 199084 F2S0F350

2061263 2061263

2081289 2081297 206ÏM9”' 2061297

199586 F2S0, F380

2061263----- 2061269

2Ô6Î297

2061271 2061271

2061297 2061297

1067-76 Bronco 1977-03 Bröncö

1964-87 C10, C20

2061289 2061289

FULL-SIZE VANS CHEV. & GMC___

________

4-WHEEL DRIVE CHEV. & GMC 1967-72 K10, K20 1973-99 K10, K20 9 Suburban 1985-89 K30 1984-87 K10, K20 1966-92 K1500

1972-91 G10-G30 DODGE

2091271

2061289

N/A

1970-ON 100-400 FORD

2081271

2061289

2061297

1960-ON W100-W250

2061271

1975-ON1150-1350

2061271

2081289

2061297

1973-86 W150

2061271

2061289

2061271

2061299

2061297

1974-91 Ramchargar

3061271

2061366

99.99

49.99

“Ï992Ë150

PRICE PER PAIR

49.99

NOTE: One SPRING KIT and ONE HARDWARE KIT la required for each Inatallatlon.

1964-91 Suburban 1969-91 Blazer Full-Size DODGE

PRICE PER PAIR 99 99 49.99 NOTE: One SPRING KIT and ONE HARdWaRE KIT la required for each Inatallatlon.

TUBELESS TIRE REPAIR KITS and TOOLS SPRINGS

(A) MINI TIRE REPAIR - for 4 ply and amaller Urea. 2020725

13.99

(A) REGULAR KIT - for 6 ply or larger (up to 24 ply). 2020733

19.99

j lifer!!*-; %

Extenalon springs 14" Long. 9/16". 103890605 PER PKG.

V 2"/pka. 44

(B) TUBELES TIRE STRIP PATCH KITTen - 1/4" x 2-1/4" atrip patchee. Open eya needle. 12ml. tube rubber. 2020261 4.29 (C) TUBELESS TIRE REPAIR CORD KIT Twelve - 7-1/4" repair cord. 6-1/4" needle. 2020253 ................................................ (D) BUFFER and STITCHER TOOL 2020519 ................................................ (E) TIRE REPAIR PROBE'RASP 2020535 ................................................ (F) 4-IN-1 TIRE REPAIR TOOL. 2020626 ................................................

4.29

2.49 1.49 9.99

TRAILER HITCHES CLASS II

Th« REESE MODEL 06051 MULTI-FTT HITCH fits a wide rang« of vehicles as listed below. Rated @ 3,500 lbs. gross trailer weight and 300 lb. max. tongue weight. Hitch has a 3* drop from bottom of frame to top of tor sion tube. (May not fit some step bumpers) Easy to install with ordinary tools. No welding required. REESE MODEL «06051 PRINCESS AUTO «4201966 - REG. 134.99 SALE PRICE UNTIL MAY 22,1993............... CHEVROLET GMC

UNIVERSAL PICKUP TRUCK RECEIVER - For use with small to mid-size trailere. 5,000 lbs. max. gross trailer «»eight and 500 lbs. max. hitch weight. If a weight dis tributing hitch is used the capacity can be increased to 7,500 lbs. max. GTW and 750 lbs. max. hitch weight. Accepts 2” square ball platform.

....94"

YEAR

73-93 Pickup Truck 2 A 4 WD

83-93 Blazer S-10 2 A 4 WO DODGE 74-93 Ramcharger 86-93 Pickup Dakota 71-93 Pickup 2 A 4 WD FORD 72-93 Pickup 2 A 4 WD 82-93 Pickup Ranger 75-91 Van Econoline, _ Club Wagon

Chev P/U, 2- & 4-WD, 8 ft. box Dodge P/U, 2-A 4-WD, 6(118a box

1971-93 1986-93 1978-93 1970-93 1970-87 1988-93

83-93 Jimmy S-15 2 A 4 WO (1) 73-93 Pickup Trucks 2 A 4 WD

VEHICLE

1970-87

Dodge Dakota P/U Ford Bronco Ford P/U, 2- A 4-WD. 6 a A 8 a box G MC P/U, 2- A 4-WD, 8 a box Chevy P/U Crew Cab

REESE MODEL «35752 PRINCESS AUTO «4205001 - REG. 154.99 SALE PRICE UNTIL MAY 22. 1993................ 1968-93 Chev P/U. 6 a A 8 a box 1968-93 CMC P/U, 6 a A 8 a box

JEEP 84-93 Cherokee XJ 72-90 Cherokee Grand 80-63 Pickup Comanche 84-90 Wagoneer XJ 72-93 Wagoneer Grand NISSAN

109"

REESE MODEL «36011 PRINCESS AUTO «4205019 - REG. 154.99 SALE PRICE UNTO. MAY 22,1993............... 1983-93 Chev. S-10 P/U. 6 a A8 a box REESE MODEL «35800 PRINCESS AUTO «ITEM 4200135

87-93 Pickup Hard Body 2 A4 WD

(1) Tall pipe may be problem on some yews

TRAILER

109* 184"

CLASS lll/IV TRAILER HITCHES

For use with trailers up to 10,000 lbs. gross trailer weight and 1,000 lbs. hitch weight if used with a weight distributing hitch. Accepts 2" square ball platform. YEAR

(A) BALL MOUNTS - For CLASS II. Ill and IV Hitches. They are available in a variety of heights. PRICED FROM ............................. (B) TRAILER COUPLERS - Available for 1-1/2' and 2' ball Couplers. 14.99 to 19.99 PRICED FROM ......... (C) COUPLER BALLS

24.99 to 39.99

Ball Size 1-7/8” 2"

Bolt Size 3/4” 3/4”

Capacity 2,000 lbs. 3,500 lbs.

ITEM 4201521 4201513

REG. 7.49 7.99

SPECIAL 5.49

5.99

SALE PRICE IN EFFECT UNTIL MAY 22. 1993 Other sizes available! (D) -AFRAME TRAILER COUPLER - Fits 2* ball 5,000 lb. GVW. 4300002 ..................................................................................... (D) "A" FRAME TRAILER COUPLER - Fits 2-5/16' ball. 10,000 lb. GVW. 4200010 ...................................................................................... (E) TRAILER CONNECTOR - 4, 6 and 8-PIN Available. PRICED FROM

32.99 34.99

VEHICLE

1970-93

Chev P/U all 2- A 4-Wheel Drives 6 ft. A 8 a box

1971-93

Dodge P/U 2- A 4-Wheel Drive, 6 a A 8 a box

1978-93

Ford Bronco

1970-93 1970-93

Ford PAJ 2- A 4-Wheel Drive,

6 a A 8 a box

GMC P/U all 2- A 4-Wheel Drive, 6 a A 8 a box

REESE MODEL «36034 PRINCESS AUTO «4200028

164"

CUSTOM ORDERS ARE ACCEPTED!

TRAILER "X CONNNECTORS Each set contain a socket and a plug. 4210906 - 4-pin 9.99/set ^4210514 - 6-pki19.99 set

6.59 to 15.49

PINTLE HOOKS and TOW RING

WEIGHT DISTRIBUTING (EQUALIZER) HITCHES B

_ ft

(A) WEIGHT DISTRIBUT ING (EQUALIZER) MITCH Distributee heavy Mich weight to all four taw vahlcla arhaala aa «roll aa to tha traitor'» whoala. Thla groat hr reduces strain at Uia roar of I ha tow vahlcla. N a lac lavato out tha ride and Improvaa braking and ataarIng control. Ratad up to 1,000 Iba. tongua araight and 10,000 Iba. groaa traHar araight. 4200044 ........................................... (B) ADJUSTABLE HTTCH BAR - Uaa with aboaa equal izer hitch. 12* long i 2* i 2* bar fit atandard hitch racaIvors. Haight adjustment of 6-3/4*. Anglo la also adjustabls. (Ball mount not Included ) 4200061 .........................................................

289"

94"

25,000 lb. GOOSENECK RETRACTABLE BALL MOUNT

MADE IN U.S.A.

(A) 15 TON PINTLE HOOK - 4.000 Lb. vertical capecfty 30.000 lb. gross traitor araight 3800125 ........................................ (B) TOW RING ASSEMBLY - For uaa with pintle hooks. Shaft dla. 1-1/2* inside opening 2-1/2* cap., vortical load 3,000 lbs. Gross traitor weight 40,000 lbs. 3807195 ..................................................................... (C) PINTLE HOOK with COUPLER BALL - A dual pur pose pintle hook that can be hooked up to a lunette ring or used with a standard ball coupler. Four 1/2" mounting holes on 3-3/8" i 1-3/8" centers 2 ton capacity, 2" ball. WL 13-1/2 lbs.

79.99

77.99

Install this retractable gooseneck ball mount Into tha bad of a pick up truck and tow traitors with a GVW up to 25,000 lbs. and a vertical load of 5,000 Iba. Ball retracts out of sight level with tha mounting plate. Chroma plated 2-5/16’ ball.

155"

LOADBINDERS

(D) 5 TON CAPACITY HITCH - Spring loaded lock. 4" hook with 1-1/2' canter O ak width 8-3/4" Haight 7-1/2". WL 8 lbs.

88 49

(E) HEAVY DUTY PINTLE HOOKS - Hof to be confused with lightweight substitutes Capacity 7,000 lbs. 4 holes for 3B00943.........................................................................51.99 1/2" bolt WL 9 Iba (F) PINTLE HOOK MOUNT - Insart Into receiver tube of hitch. Pintle hook can bo mounted In a high or low

41.99

GRADE 70 TRANSPORT CHAIN LOADBINDERS,

B ■rf V

5/1C~ wir.

WW'

(A) WINCH TYPE LOAD-

2, 1. « BliïZTFk'ït,

1-3/4" nylon webbing. 3800919........................

33.99

(B) NYLON WEB AND HOOK ASSEMBLY - For uaa with above loadblnder. 6,000 lb. load rating. 1-3/4" Wide. 3800935 - 30 fL long 3803285 - 25 fL long

38.99 35.99

PLASTIC GAS TANK Holds 4 quarts. Measures 10” * 8" x 5". Mounting holes 5/16". Shut-off valve fits 1/4" I.D. hose. 4770376 ................

14"

(A) HEAVY DUTY LOADS INDER Working WL limit 5.400 lbs. Uaa with 5/16” or M'chain. 3800778

29.99 D.O.T. APPROVED

(B) GRADE 70 TRANSPORT CHAIN 3800851-3/8’

* f

4.49 4.89

2.49/ft. 3.19m.

MULTI- PURPOSE POLY COVERS • Laminated, Woven Polyethylene • Weatherproof Strong and

» Aluminum Grommets • Edges Reinforced Roped

• FI nished Sizes • Light, Easy To Use • Completely Waterproof Uses: To protect boats, cars, swimming pools, construction sites, equipment, timber, etc.

10X10 MESH 10 FIBRE TAPES PER SO. INCH SIZE ITEM PRICE 5 ft. X 7 ft. 6 ft. x 8 ft. 8 ft X 10 ft. 9 ft. X 12 ft. 10 ft. x 12 ft. 10 ft. x 16 ft. 10 ft x 20 ft. 12 ft. x 16 ft

2480853 2480309 2480291 2480317 2480325 2480333 2480622 2480341

TRUCK TARPS

SIZE

ITEM

PRICE

2480861 2480358 2480630 2480366 2480879 2480705

31.99 36.99 44.99 62.99 86.99 139.99

30 ft. x 50 ft. 2480655 SALE PRICE till MAY 22, 1993 ..

99.99

12 ft. 15 ft 18 ft. 20 ft. 24 ft. 30 ft

3.99 4.99 8.49 11.99 12.99 17.99 21.99 19.99

X X X X X x

24 ft. 20 ft. 24 ft. 30 ft. 30 ft. 40 ft.

HAYSTACK and MACHINERY TARP

18 ft. X 48 ft.* 25 ft. X 48 ft.**

6ft x8ft 8 ft. x 10 ft. 12 ft. x 16 ft. 12 ft x 18 ft. 12 ft. x 20 ft

ITEM

PRICE

2480762 2480770 2480796 2480804 2480812

29.99 45.99 89.00 99.00 109.00

We also carry CANVAS DUCK TARPAULINS

V-BELT PULLEYS

(it \'A

Gravity straps on the side of the hold « tarp will 2x4' s or pipe to continually tighten down the cover as bales shrink/settle. SIZE

154.99

14X14 MESH SIZE

PRINCESS AUTO carries SINGLE and MULTIPLE GROOVE PULLEYS for “A" and “B” SECTION V-BELTS. We have 2” to 12” diameter pulleys with bore sizes ranging from 1/2" to1”.

Consult our LARGE CATALOGUE or visit a PRINCESS AUTO STORE for complete descriptions and prices. ITEM

PRICE

2480135 2480143

179.99 234.99

* Ideal 10 ft. bale wagon cover. ** For covering 72 5 ft. dla. round bales.

BROWNING BUSHINGS and SHEAVES

ROLLER CHAINS Available in 35, 40, 41, 50, 60. 60H and 80 sizes in 10 ft. Available in 2040, 2050 and 2060. Connecting links are also available.

4MM

WELD-ON HUBS, SPROCKETS AND PULLEYS

A C (A) SPLIT TAPERED

BUSHING with KEYWAY Available in 5/8" to 7.95/eech 1-1/2” bore. FROM (B) SINGLE GROOVE SHEAVES - Fits “4L” or “A” and "SL" or ”B" belts. Available in outside dla. of 3.15" to FROM 15.29 to 31.99 n 78 (C) DOUBLE GROOVE SHEAVES - For use on applica tions of 5 HP and over. Fits ”4L'' or "A" and "5L" or "B" belts. Avalleble In outside dla. of 3.36" to 9.75". FROM.

24.99 to 54.99

We also carry a wide selection of V-BELTS In lengths from 22” to 144". Check our large catalogue for a com plete list of sizee end prices.

PRINCESS AUTO carries a complete line of WELD-ON HUBS. SPROCKETS and PULLEYS. Simply clamp hub to sprocket or pulley and weld. Hubs available In 1/2” to 1-3/8” bore. Sprockets available In sizes from • to 48 tooth for 1/2”, 6/8” and 3/4” pitch roller chain. Pulleys available lor A or B SECTION BELTS In 3’ to 16” diameter. For PRICES and SELECTION SEE OUR LARGE CATALOGUE or VISIT A PRINCESS AUTO STORE

PULLEYT Metal. 2-3/8" x 1/2" bore. 1/2” wide groove. 3892916 ...............

2« 47

agr (B)

5.5 HP Horizontal

HONDA Power Equipment Engines Horizontal

Fuel Tank Capacity

Safe: HONDA 4-CYCLE J OVERHEAD r% VALVE GAS fin ENGINES have / U established a ' ™ reputation tor: • Sure and eaay darting! • High fuel economy! • Tough durability! • Eaay maintenance! • Steady high power! • Low noise and vibration! • Compact, eaay to mount!

Ü?»

Dimensions

Wt lbs.

ITEM

12.20x13.64x12.72

28 6

4770418

374.00

12 48x14.46x13 40

33.0 4770428 4770434

424.00 47400

17.40x13.80x14.20 15.20x17.20x16.40 16.30 X 16.0 x 16.0

34.1 4770442 55.0 4770459 57.2 4770467

484.00 694.00 644.00

3/4

GX120K1QH

.55 gals.

B B

GX160K1QH GX160K1QX

.79 gala. Same as above with oil guard. Automatic shut-off when oil Is low

C D

GX V160 N4 GX 270 OH GX V270 K1 DN

.44 gals. 1.32 gals. .43 GALS

UNIVERSAL JOINTS and PTO REPAIR and REPLACEMENT PARTS

PRINCESS AUTO carries common sizes of universal joints, and repair and replacement

a/4

1 1 1

ii HP

L" i W” a H"

Shah Size (Inches)

PRICE

FLEXIBLE COUPLINGS (3 Piece Combinations) Ideal for attaching pumps to motors. Available for DRIVES up to 40 HP. Common bore sizes from 1/4" to 1-3/8".

BODY - SPIDER - BODY

parts for PTO DRIVES!

PILLOW BLOCK and FLANGE MOUNT BEARINGS

Available in common bore sizes from 1/2" -1-15/16". REPLACEMENT BEARINGS also available!

CENTRIFUGAL CLUTCH 3/4" Bore. 10-Tooth #40 Chain. 3852514

3995 48

WORM GEAR SPEED REDUCERS

Input shaft 5/8", output shaft 1". O all Size: 6" x 6" x 10". Wt 16 lbs.

Ratio

Otput RPM & Max. Input Max. ITEM 1725 RPM Input (In. lbs.) Input HP 330 29 60 to 1 1/4 3840106 34 357 45 to 1 1/2 3850583 58 386 30 to 1 1/2 3840113 116 430 IS to 1 1 3840121

Pf»CE 169.95 169.95 169.95 169 95

BRIGGS and STRATTON 4-CYCLE GAS ENGINES

fBriggs i stratton)

RELIABLE GAS ENGINES AT VERY COMPETITIVE PRICESI Th« 10 HP and 16 HP are built tor Industrial/Commercial application«.

HP« 3,600 RPM A 3 B C

5 8 10*f

16*

-°

Bora (Inches)

Stroke (inches)

2-3/8 2-9/16 3 3-7/18 3-9/16

1-3/4 2-7/16 2-3/4 2-3/8 3-1/4

'Industrial/Commercial Engine

Disp. Construction Cu. In.___________ 7.75 12.57 19.44 22.04 32.40

Shaft Size Starter (Inches)___________ 5/8 3/4 1 1 1

Alum. Alloy Alum. Alloy Alum. Alloy Alum. Alloy** Cast Iron

**Cast Iron Sleeves

rewind rewind rewind electric electric

Wt. ITEM (Iba.)________

27 30 45 96 107

4770129 4770079 4770087 4770384 4770111

PRICE

279.99 324.99 487.99 879.99 1289.99

fWIth Oil Guard - Low Oil Shut Down

VERTICAL SHAFT ENGINES 8.5 HP l/C VERTICAL SHAFT ENGINE Heavy duty Industrial Commercial Model. Cast iron cylinder sleeve. This Is the Industry standard for smaller riding equipment. 1” straight shaft with keyway. Ball bearing equipped. Complete. 4770053................................................................

549"

5 HP VERTICAL SHAFT ENGINE Designed for consumer mowers requiring extra horsepower. Popular for small rear engine riders and high wheel mowers. Comes with ball bearings and Pulsa-Jet carb 4770350....................

vJ> *

314"

OMEGA ELECTRONIC IGNITION

C : )

Bk.

Gives dependable starts and smoother running engine. Easy Installation can be used on Briggs and Stratton, Tecumseh-Lauson, Lawn-Boy, Honda and others (except on Tecumseh engines

aid

with cast iron flywheels). 4780300 ...............................

GAS ENGINE and LAWNMOWER PARTS

14"

fàmüjp S' > GAS ENGINE

MODEL 402707 Vertical Shaft. Electric start and charg ing system. 1". Shaft. Comes with out a gas tank. 4770046

ONLY PRINCESS AUTO carries a wide vertety of parts for small gas engines and lawnmowers. Visit your nearest store or check our large catalogue.

99900 ^LIMITED QUANTfTY

TRUCK BOXES (A) SINGLE UD BOX - Large hill length «Ingta M la weather-stripped to kaap out dual and moisture. Opana wlda to handle large Items Puah button ralaaaa tram either aide. Locks from driver's aide. Ftta all wlda bed pickups tram 1M7 to present 4280178

239"

(B) Firm WHEEL STORAQE/TOOL CHEST - Sits on the floor of the pickup. Idéal to use with "fifth wheal" or a camper top. Fits all adds bod pickups tram 1987 to prasent 4280186

324"

(C) L-SHAPED LIQUID TANK - Fits underneath truck tool bos Capacity 109 U.S. gal. O aN. Dim.: 90-9/8" long i 25" wide i 31* high 4280236

419"

(D) INNERSIDE TOOL BOX - Attach to the side of pickup bos. 84* long. Uft out tray. Fits aN standard, compact and mid-sirs long

199"

4280202

(E) UNDERBODV BOX - Mounts above or below truck platform. Measures 38’ long s 18* wide s 18* high. Lock fastens door at top and on both sides 4280210

259"

POLYETHYLENE TRUCK BOX

ease

Lightweight but sturdy polyethylene boxes.

(A) POLYETHYLENE TRUCK BOX - Steel rein-forced. Low profile. Can be used on trucks artth camper tops Also useful in garages, workshops, shads, ate. O'all. Dim.: 53-3/8" long x 2-1/8* deep x 19* high. ^ gggg 4280277 IB) COMPACT TRUCK BOX - Steal reinforced. Fits all short wheelbase compact and mld-slze trucks.

198"

4280285

(C) WHEEL WELL BOX - Can be mounted In front or back of wheel wells. Lid converts to open left or right Lids are steel reinforced 4280269

104"

(D) PACKER BOX - Ideal storage box that can be used etc in a truck box or In the garage, workshop, boat, Boxes are padlocksbte. O'all. Dim.: 44" long x 20" wide x 18-3/4" high. 4280319

84"

ALUMINUM TRUCK BOX HIGH TEMP. BLOWER ASSEMBLY 115 VAC. 80 CFM Free air. 1/45 HP motor. 1.1 Amps. 4-1/2" Dia. inlet. 2-5/8” x 1-5/8” outlet. O’all. Dim.: 17-1/2” x 7-1/4” x 5-1/4” V 0770099

39y

Diamond tread plate aluminum is strong and rust-resistant, yet gleams brilliantly Midlid design offers batter accessibility to tbs box. Interior tray slide rails reinforce aide walls Paddle handle and locks fasten lids and safeguard contents. Fits all wide bed full-el» pickups from 1987 to present 4280293

PICKUP BOX SIDE RAILS

Made of high polished special alloy aluminum. Give a chrome appearance without the possibility of rusting. JJJjJJjjB Under all connecting parts to the Pickup Bed are plas tic pads to cushion and avoid cracking of ths paint WÊjjm when fastaned._______ PRICE ITEM prjg MADE_______________ 84.99 4201356 UWß For 6 ft Full-size truck 4201364 94.99 For s ft Full-size truck

TUBE GRILLES At Last A Tube Qrllle That Handsomely Adds That Custom Look To Your Pickup Truck! The tubes are heavy gauge 8/6" diameter steel tubing with bright tr^tle chrome finish, plated to automotive specifications. They can be easily assembled and Installed lor years of trou ble-free use. Unconditionally Guaranteed For One Yearl 1973-80 Blazers end Chav Pickups, 1978-62 Chev/OMC Vans, 1978-80 QMC Pickups.

“

•■MM» J«.»* As ■' >

< -K.

GATE MATE Flow through tailgate improves the mileage of your pick-up. All steel construction. Black finish. Fits standard sized pick-ups. mptete with mounting hardware. Wt. 16 lbs. »168.......................................................................

124"

TRUCK SEAT COVERS

WrasgleR

• Custom Wrap-Around Design • Quick snd Easy Installation - Valero Fasteners • No Slip, Heavy Duty Strapping • Cool In Summer, Warm In Winter • RVle/FIshing Rod and Accessory Pockets • Machine Washable (drip dry). STYLE

BLACK

(A) Truck Bench 4257507 (B) Split Bench 4257911

BROWN

WINE

4257499 4257515 4257903 4258505

BLUE

4257523 4258513

PICKUP BOX GATE GUARDS

TRANSMISSION COOLERS

LONG

lip® 4201471 - 1972-87 Chev/GMC Truck . 4200150-1973-88 Dodgs Truck.......... 4201299 - 1980-86 Ford Truck............. 4201307 - 1982-88 Ford Ranger Truck 1982-88 Chav S-10/GMC S-15 Trucks. 4201315 ....................................................... 4201844 - 1988 Chev/GMC Truck.......

14.99 14.99 14.99 14.99 14.99 14.99

Stacked plate configuraBpS tion gives 35% more efflBkP cient cooling. Self regulat-

tions. B.T.U. Heat Refection

ing. Fluid does not flow through cooler In cold condi

G.V.W. Rating (lbs.)

ITEM

14.000 18.000 24,000

4240479 4240487 4240453*

9,000 13.000 17.000

PRICE

49.99 54.99 75.99

* Not Self Regulating

r COMPRESSOR UNIT This compressor unit is taken from a liquid cooling unit. 1/12 HP compressor 11S VAC. 13 Amp O'aii. Dim.: 18-1/2" a 12-1/2” a 7". REQUIRES CHARGING.

0720680 ................................................................................

TRANSFER PUMPS MICO TRANSFER PUMPS ar» recomnwndtd for gasoline. keroeene, tuet oils. insacttcidsa. hydraulic fluid», alcohol and solvents. Powar aourca la a 12 Volt batlary Pump» between 12-14 GPM COMPLETE PACKAGE - include» power head with atop and atari awHch. 12 It ot cable with battery clip», 30' standpipe. 12 IL hoee with nozzle and nozzle holder. Wl. 25 lb» 2461069 ................................... (A) POWER HEAD - 12 Volt.

489”

CLEARANCE 199.99

2460624 .................................

(B) MICO STANDPIPE and IMPELLER ASSEMBLIES - Aluminum construction. Length 30 In. WL 4 lbs. 142.99

2460632 .........................................................

149.99

2460640 - Length 38" WL 5 lbs...................... (C) 12 FT. HOSE with 3/4" NPT male ends. 2461077 ................................................................

31.99

FUEL METER with FILTER Ä/V

IMk*

For usa with any pump or gravity leed system in the 4 to 20 GPM f" output range. Built-In fuel filter. Can be mounted In a vertical or horizontal position. a Measures In liters, 1 * NPT Inlet and outlet ports. 50 PSl max. working pressure 2460012

194"

REPLACEMENT FUEL FILTER^or above meter

15.99

2460020

FUEL TRANSFER PUMPS

FUEL TRANSFER PUMP I Lightweight corrosion reaistant cast aluminum body r Designed for use with gaao1 line, dlasal fual or kerosene. 12 Volt DC pump with 20 ft. 14-gauge power cord with clips and 20 amp fuse; 12 ft. Buna-N hoee, automatic shut-off nozzle and an adjustable suction pips. Pumping rata of 13.5 GPM at Ihe _ __ __ nozzle. Current draw of leas than 23 amps. 1 * Inlet and outlet porta with a 2* tank bung

389”

2460004

NEW

12 Ft. length of fuel hoee without ends.

19.99 29.99

2460152 - 3/4' 2460160-1* .

BILGE PUMP 12 VDC Small pump that can be used In aquari ums, fountains, boats . or parts washers with A mild deter-gents. Will “

(A) BARREL PUMP - Head threaded for 3/4* garden hose coupling. 3/4* O.D. outlet tuba. Fits 2* bung.

WL 6 lbs. 2460616.

27.49

(B) LEVER ACTION TRANSFER PUMP - Can be used on any 15-30 or 55 gal. drum to dispense liquids. 1 pint per stroke. Telescoping suction pipe, steel plunger with brass rings, 1-1/2* to 2* bung nut and removable spout Head is 3/4* O.D. outlet tube. 34.99 2461002 ....................................... (C) ROTARY VANE BARREL PUMP - Rated 4.4 gal. for every 72 turns of the handle. 1* discharge spout with hose. 40* Extension tube. Barrel nut to nt 2* barrel. 84.95 2461333

operate on 4.5 to V 12 VDC batteries or trans-formar. Fully sub mersible. Inlet at bottom. Use 3/8* I.D. discharge hose. Cap. approx. 1 GPM. O’atl. Dim.: 1-1/4* x 2* x 3-1/2*. 4270013

19"

r A

(A) DOUBLE-ACTING - For fuel, herbicides, antl-freezs, alcohol, solvents, detergents, etc. .95 litres per stroke 1 * NPT inlet, 3/4* NPT outlet. 8 ft. x 3/4* hose. Adfuetabic 2* thread bung.

We carry an extensive line of grease guns and

2461200 *1

Slffliflfl58 1fuIlpumpC 12 Volt DC electric fuel pump. 3/4* O.D. inlet. 3/8* O.D. outleL Call. Dim.: 4-3/8* x k 1-1/2“ x 1-3/4*. V 2461242 ....

< *■795

BARREL PUMPS

159.99

Ml |B) DUAL-FLO PISÆ3TON - Pump 1 or y' a 2 quarts per stroke. ,W Aluminum body, g fL 1 * die. hose with thermoplastic nozzle. Taro piece 31* plastic suction pipe artth steel nipple. WL 17 lbs. 2461176 .... 178.99

FUEL ACCESSORIES (A) 1-1/4“ GRAVITY SPOUT.

246009S .........................................................

(B) 1 “ UNLEADED GAS GRAVITY SPOUT. 2460103 ................................................................ (C) 1“ HEAVY DUTY GRAVITY SPOUT. 2460111 ................................................................ (D) 1“ ANGLE VALVE - Lockable.

2460129 ......................................................... (E) 1-1/4“ ANGLE VALVE - Lockable. 2460137................................................................

HYDRAULIC BODY and FRAME REPAIR EQUIPMENT

74.99 24.99 29.99 34.99 38.99

7 PCE. AUTOBODY REPAIR KIT

Lets you make collision damage repairs In half the time of conventional pounding methods! Available in 4 and 10 ton models, they contain the largest assortment of the most commonly used attachments. Including the very popular spreader.

Kit contains bumping hammer, body hammer, pick hammer, combination dolly, universal dolly, mushroom dolly and heel dolly. Precision ground, milled finish and heat treated. Wt 11-1/4 lbs. a -799 4290334......................................................................... * ■

HEAVY DUTY SINGLE CUP DENT PULLER

199" 299"

4 TON KfT.

4290169

10 TON KIT.

4290177

DUCK BILL SPREADER ONLY.

4290193

4* Diameter cup. Suction is broken by the finger operated

33.49

(A) GREASE GUN FILLER - Fills hand and air operated grease guns equipped with proper filler plug. Fits 25 to 50 lb. pails. 4270005 ... (B) ONE HAND LUBRICATING SYSTEM - Lever action grease pump, one hand gun and 60 Inch hose. Fits ill. 25 lb. pa 4272902

74.99

126.99

(C) AIR OPERATED GREASE GUN - One-handed grease gun that delivers 1.500 to 6,000 PSI Attach to an air compressor. Loads three ways: bulk, cartridge or dispenser. Equipped with both a metal and flexible spout

39.99

4270328

(D) 3-WAY MULTI-LOAD LEVER TYPE GREASE GUN.

14.99/ea

4271763

HYDRAULIC FLOW DIVIDER Full flow of 10 GPM passes from the V pressure port to the bypass port until the solenoid Is engaged. Once the solenoid Is engaged 3.5 GPM Is diverted to the reguleted port. Relief valve Is preset at 2,500 PSI and must be connected to the tank. Solenoid operates on 12 volt. O’all. Dim.: 6-1/4’ X 4-1/4" X 2-1/4". 1240043..........................

7999

PRESSURE GAUGE 0-500 PSI. 2-1/2" Dla. dial. 1/B" bottom connection. 0433839 .............................

7" J 53

RATCHET HOISTS

PORTABLE HOIST/PULLER • Big pulling powffi 10 ft. Of S/32" cable. • 1.000 lb*, cap. Folds up I naat 8"x1 3-1/2" hea duty carry caaa. that aaally under a pickup seat. Carry It on you or mow machl Made In U.S.A.

PULLER ACCESSORIES O

B B

2,000/4,000 4,000/8,000

STEEL TROLLEYS Designed to distribute loads on all 4-wheels, high grade sealed ball bearings. Adjusts to various I-beam widths. * Dual pinions to provide additional strength and stability • Safety drop plates to prevent accidental fall • Extremely lightweight and portable • Low clearance design featuring center hooking assembly which con nect both pinions. Min. PRICE Cap. I-Beam I-Beam Wt. ITEM Size (tons) Size 119.99 5x3 1015 13 1580661 154.99 11/2 5x3 10 x 5 18 1580679 2 7x4 219.99 14 x 6 28 1580687 8x4 3 294.99 14 x 6 47 1580695

(«»•)__

COIL CHAIN

* v-

GRADE 30 CHAIN Size (Ina.)

Tested Proof

3/16 1/4 5/16 3/8

1,240 2,200 3,400 5,200

Safe Working Load

620 lbs. 1,100 lbs. 1,700 lbs.

2,600 lbs.

ITEM

PRICE (pTft.)

3805876 3805884 3805892 3805900

BLUE CHROME FINISH PROOF CHAIN Size Safe ITEM (Ins.) Working Load 3804770 3/16 750 lbs. 1/4 3804788 1,250 lbs. 3804812* 2/0 Trade 520 lbs.

75« 95« 1.35 1.99 PRICE (per ft.) 1.14 1.49

90t

* Straight Unk

rTURNBUCKLES

(A) ADJUSTABLE CABLE SLING - For lifting motors from cars, trucks, tractors and boats. Can be locked with long and short legs to hold s motor at proper angle for Installation or removal. Cap. 2,350 lbs. A bolt ' through tha anchor lugs converts It to an excellent anchor loop for vertical lifting, horizontal pulling, stretching or positioning. 1580133...............................

18.99

(B) FENCING WIRE CLAMP - Designed to use with a P uller to stretch wire. 580117 ...................... (C) PULL CABLE - Required for the proper erection of chain link or other fencing with tension bars. 1580125

11.99 14.49

GALVANIZED AIRCRAFT CABLE ECONOMIC ALL V PRICED QUALITY AIRCRAFT CABLE! • construction Flexible preformed 7x19 • Excellent for winches, towing, in farming and construction, etc. Dla. (Ins.)

ITEM

50 FT COIL

(

*3? ITEM

100 FT. COIL

ITEM

150 FT. COIL

8/32

382104« 13.9»

3821058 24.9»

1/4

392109» 22,9»

3921097 38.99 3821106

99.99

5/16

3821113 24 99

3821121 48.99 3821139

69 99

3/8 1/2

3821147 31.99

38211S4 59.99 3821162

87.99

3/1«

3B210B3 16.99

(6 x 19) 3821170 59.99

3821071 28.99

- |

3821188 109.9»

AIRCRAFT CABLE - By the foot! Electro Galvanize Finish.

.SH V 54

1" Bolt Dla. 14" Bolt Length. 3800349 .....................................

3807294 - (7x19) 1/8" ........................................ 3807286-(7x19) 3/16" .....................................

10” J

3807310 - (7x18) 3/16" (PVC) coated to 1/4" 3807302-(7x19) 1/4” .......................................

36C/n

42C/ft.

56Cm 56«/n

HAND WINCHES Load Capacity

600 900 1200 1400 1700 1900

Gear Ratio

Reel Capacity (feet x Inches)

3.1:1 3.1:1 4.1:1 4.1:1 5.1:1 5.1:1

50x3/16 60x3/16 100x3/16 100x3/16 200 x 3/16 200 x 3/16

Ratchet Type* One-Way One-Way One-Way Two-Way

Wt (Ibe)

Two-Way Two-Way

10 10

4 5 6 6

ITEM

PRICE

1510288 1510395 1510148 1510304 1510312 1510320

19.99 22.99 24.99 31.99 39.99 46.99

' Free Spool In off position WIRE ROPE KEEPER - Used with the above SHELBY WINCHES to attach the

1.39/ea.

wire cable to the drum. - 1540376

TWO-SPEED HAND WINCHES No More Lost Handles - Change speed (gear ratios) without removing the handle. Simply press locking lever and shift handle from side to side to change gears or free spool. (Handle will not spin in free spool position.) All models have a hand brake. LOAD GEAR WT. ITEM PRICE REEL CAPACITY (ft.) CAPACITY RATIOS (lbs.) 1/4” 7/16" 1/2" 38 28 2,300 79.99 16 1510338 4.1:1 A 11.8:1 37 2,800 50 88.99 5.1:1 A 14.7:1 17 1510270 3,200 34 46 104.99

5.1:1 A 14.7:1

1510163

WORM GEAR WINCHES 1,500 LBS. CAPACITY 30:1 RATIO I Worm Gear Winch gned to give smooth, >nt control for a wide nge of lifting, lowering, ^ winching, opening, closing and many other applications. Self-locking. Load must be cranked up and down. Here are the features that assure quiet, dependable, long life operation: precision cut gears and shafts running on ball bearings. Fully enclosed cast Iron housing. Drum capacity 45 ft. 1/4" Cable. Complete with handle and predrilled mounting base.

Wt. 22 lbs - 1510197 ...............................

209"

2,000 LBS. CAPACITY 41:1 GEAR RATIO Worm Gear Winches are self braking for applications requiring a posi tive mechanism that cannot acciden tally run free. The load must be r cranked up or down and will remain 11 fixed in place when the handle is v" ^ released. The worm gears are manu factured from heat treated alloy steel, v Thrust bearings at both end of the worm gear greatly reduces operating friction and provide much longer winch life. The reel gears are manufactured from high carbon steel for long wear. Max. reel capacity 60 ft. 3/16" cable. Wt. 10 lbs.

1510155 ........................................................

3,700 LB. HAND WINCH

77"

WINCH STRAP

This Is the largest capacity HAND WINCH we offer. Two-speed winch that quickly changes speed by moving the handles. 5.1:1 and 15.8:1 gear ratio. SHIFT LOCK holds shaft in desired gear ratio - |ust lift the lock and move shaft Into the desired position. FREE WHEELING without a spinning handle makes for safer opera tion. Holds 185 ft.of 7/32” steel cable. 1 -3/4" hub size. 8lack finish.

25 FT. x 2 INCH with heavy duty hook. '■'& Use on HAND WINCHES Instead 0 of cable. 15401384

14"

1510361 ...............................

3,000 LB. WORM GEAR WINCH Su

conper heavy duty design for total ntrol of the load. Load position will remain fixed when handle Is let go 3,000 lb. capacity. 51:1 gear ratio. Drum measures 3" dla. x 3-7/S" wide. Shpg. Wt 24 lbs.

1510015

129"

8\] SHIFT LEVER ASSEMBLY 12" lever. 30 In. cable with 2” travel. Housing measures

«3890357

8-1/2" x 7" x

9" 55

115/230 VOLT WINCHES qUPFHYYINCH

• Full Thirty Minute Continuous Full Load Duty Cycte Every Hour (30 min. ON - 30 min. OFF) • Friction broke will lock end hold up to full cepeclty • Freewheeling lecture along with power In and power out.

Cornea with cable teneton plate and 0 Ft handheld control. Voltage (A)

Cable

Stall

Rated Line Pull

(Ibe.) 1.500 3,000

115

(B) 115/230

O'all. Dim. L" x D" x H"

(•be.)

5/32” x 45 ft 1/4" x 100 ft.

12.97 x 5.37 x 5-75 22.25 x 8 88 x 8.83

18 52

POWER WINCH

1530450 - Complete as illustrated........ 0701441 - Reversing Switch for above A

PRICE

153099/ 1530021

1134.00

449.99

110V BOATHOUSE WINCH

WORM GEAR TYPE SPEED REDUCER - 30 to 1 Geer Ratio. Will hold a load In any position 1/2 HP capacitor start 110V C, 1725 RPM motor. Drum capacity 45 feet, 1/4" cable. Cable speed 12 feet per minute. Wt. 60 lbs.

RATED UP TO 1,000 LBS.

ITEM

Die. x Length

439" ... 56.99

3,500 LB. SINGLE UNE PULL. Powered-In and freewheeling and braking In reverse. 450 to 1 gear reduction Cable speed 12 FPM (first layer, ^ no load). 10 ft. remote control cord and switch, 50 ft. of 7/32” aircraft cable, safety hook and emergency hand crank, weather resistant ABS housing. For use with 110V current. Designed for intermittent use only. Can work tor 5 mins, continuous then must be allowed to cool for 1 hr. 1530427 .....................................................

459"

4 TON RHINO WINCHES

• 8,000 LB. CAPACITY - Equipped with dog clutch for free spooling • STRONG GEARS - Give corf red gear ratio for speed In handling load. Gear I Ratio 29:1, Ball Bearings, Input Shaft 1ln., Drum Dimensions: - Core: 4-1/8"; O.D. 10-3/4"; Inside Width 9-7/8" O'all. Dim.: 215-6/8", Width 16-21/32". (A) FRONT MOUNT - Wt 160 Ibe. 1530104 ..............................................

649"

(B) BASE MOUNT - Wt. 150 lbs. 1530112 .......................................................

669"

Can be converted to hydraulic operation. See our large catalogue for components.

ProMAX Series TRAILER WINCHES by

j SI

These professional quality winches have a black zinc finish for the

TRUCK MIRROR Main mirror measures 5" x 10”. Beveled wide angle mirror measures 5” x 5". Mounting stud at top and bottom Is 1/2" In dla. with thread. a 5/16"

Vi 56

4250015

/•ÏJ“'"---«

ultimate In rust and corrosion resistance. Large handle grip provides easy winch cranking. Heat treated high carbon steel shaft and pinion gear. Stainless steel ratchet spring. (A) 900 LB WINCH Complete with 20 ft. rope and grab hook Easy to use "grabber" one-way ratchet. 1510403 Wt 6 lbs

(B) 1.400 LB WINCH Complete with 20 ft. winch strap and grab hook. Easy to use two-way ratchet. Wt. 7.5 Ibe. 1510411 .........................................................................................................................

54"

12 VOLT HP X9 ELECTRIC WINCH Wà

HYDRAULIC WINCH

5UPERYYINÇH 9,000 Lb. Capacity. Hydraulic worm gear winch with a Char-Lynn 2.8H hydraulic motor. Rated 9,000 lbs. line pull bottom layer, 7,000 lbs. top layer. 24 fL/mln. line speed. Power In, power out and free spooling out. Recommended cable 3/8” x 100 ft Max. oil How 13 GPM. O'all. Dim.: 18.30" x 15.19" x 8.08". Wt. 63 lbs. (A) WINCH - With hydraulic motor. 1550003 ................................................... (B) ROLLER FAIRLEAD - For above. 1540061 ..................................................... 20,000 LB. PULLEY BLOCK - Doubles pulling capacity to 18,000 lbs. 1540053........

f Rated Line I Pull 9,000 V

SUPEHVY1NB!

98900

129.00

99.00

lbs. Stall 11,900 lbs.

SPECIFICATIONS: 12V DC. 2.0 HP. 259:1 Gear ratio. O'all. Dim.: 22.8”L x 6.6’H x 6.7”. 100 FL X 5/16" cable. Wt 76 lbs. 1530039 .......................................................

92900

8,000 LB. WINCHES B

A MODEL Rated Line Pull Motor

M8274

M9000

8,000 lbs.

8,000 Lbs.

2.5 HP Series Wound

2.1 HP Series Wound

Remote Control Gear Train Gear Ratio Une Speed @ no load Clutch (free spool) Cable (Inches)

Brake

Dims: L x W x H (Inches)

12 ft Spur Gear 134:1___

12 ft 3-Stage Planetary 216:1

52 fpm

29 fpm

Sliding Motor Pinion

Sliding Ring Gear 100 ft x 5/Ï6" dia.

150 ft. x 5/16" dia. Auto Disc Type

Auto In-Drum

16 3 x 8.5 x 15

20.8 X 5.8 x 7.3

Fairlead

110 lbs. Hawse

62 lbs. Hawse

ITEM

1530005

1530724

PRICE

__ 1039.00

884.00

REPLACEMENT HANDHELD CONTROL - For 8,000 lb. Warn Winches. 1540434

69.99

8,000 LB. WINCH 8,000 LB. RATED LINE PULL REVERSIBLE ELECTRIC PLANETARY GEAR WINCH PACK AGE - Freewheeling out For half-ton, mid-size, compact pickups and sport utility vehicles. 1.8 HP 12 VDC motor. 210:1 gear ratio. 95 ft of 5/16" cable. No load line speed of 13 FPM. 9 FPM @ 4,000 lb. 4.5 FPM <§> 8,000 lb. O'all. Dim.: 20.7L In. x 6.0 W In. x 6.38H In. Wt. 61 lbs. 1530989 .

829"

u.s.

ARMY TANK WINCH ■ Brand new In original wooden crate • Rated 7,500 lb. pull • Basic unit measures 23"L x 10"W x 12 "H • Wt. 268 Lbs. For complete Information check our large catalogue or visit your nearest PRINCESS AUTO store. 1530047 ..........................................

79900

I fUEWHFI l INI> WITH REMOTE HANDHELD SWITCH Rated Modal EX1 XIF XI X2F X2

Free Una Pull Wheal (Me.) no 1.000 yes 2,000 no 2.000 yes 3300 no

3,000

SUM (toe.)

Motor Qaar (HP) Hafc

DU. x Lgth. (Inctiaa)

Oak Dim. LxOxH (Inches)

NO Load Una Spaad

1,350 2,500 2.500 3,500

.5 13 13 1J

123:1 123:1 123:1 146:1

5/32 3/16 3716 7/M

x 25 ft 221pm 11 37 x 537 x 575 X 25II 25 »pm 15 4x5.37x5 75 x 25 ft. 251pm 15.4x5.37x5.75 »49* TTtçm 12x537 x 5.75

3,500

146:1

7/32 X40IL

271pm

12x5.37x5.75

7/32 x 50 IL

301pm

133x7.75x635

SALE PRICE UNTIL MAY 22, 1993 X3F

yes

4.000

4,500

146:1

PULLEY/SPROCKET DRIVE WINCH

This winch has the same specifications as the X1 (see above) but Instead of a drum to hold the cable the drum la machined to 1-1/4” dta. with a 1/4” key way and key. A pulley or sprocket can be attached to this shaft for use In many applications. Ideal as a drive winch for truck tarps. 2,000 lb. rated line pull. 1530607 - (less switch)

279"

Is 9 a

239 99 334 99 294.99 409.99 349.99

1530617

494.99

.............. 248.88

2,500 LB. WONDER WINCH The llrst and only utility winch to give full pulling power from the llrst to the last wrapfeature of the wlrs the rope. Another positive control system. Including a built-in self locking mechanism. This power-in/power-out feature allows tout control of the load at all times. Die cast alu minum housing. SPECIFICATIONS: 2300 to. single line pull. 25 FPM no load speed. 5 FPM • full load. 25 Amps • no load. 225 Amps • full load. 275:1 gear ratio. 12 VDC 1.3 HP motor. 25 a 3/16” galvanized aircraft cable O ali Dim: 937”L x 5.91 "W x 636"H Wl 22 lbs 1530815 .

___

■

TIGER Brand Chain HofsU constructed throughout providing highest quality and durability. Compact and lightweight these units employ triple spur peering to fftjpwrMTt effort when lifting. FEATURES:

SLIDE HAMMER^

Super Load Chain. Load Chain Guide. Load Chain Stopper, Safely Brake. Swivel Type Hooks with Safety Latches. Min

V 58

PRICE

1530674 1510007 1530559 1530013 1530667

TRIPLE SPUR GEARED CHAIN HOIST

Capacity 2 ton. Boom from 4 a 3". to 6 a 6". Legs extend from 4 a 6" to 7 a 3”. Highest rise of boom

399"

ITEM

15 19 16 21 21

344"

SHOP CRANE

1580232

WL (Me.)

Professional Quality. Heavy Duty. 20" long. WL 5 lbs. 4290508

i9”y

Capacity Lift (lone) (Mel) 1/2 10 1 10 1-1/2 10 2 10 10 3

12* 13*

v-'

Shpq Wl

ITEM

__________ 1560612 169.99

14“

24 26

15* 17*

36 46

1! II

1560663

1560620

194.98 269.99 299 99 399.99

2-1/4 TON FLOOR JACKS

(B) EXTENDED UFT MODEL SIMILAR TO (A) MODEL except EXTENDED LIFT MODEL. See chert below for specifications.

MODEL QUALITY JACK at a SUPER PRICE! QUICK, EFFICIENT, SAFE _ - ONE-MAN OPERATION A power pack on wheels, good for ser vice stations, farm repair shops, road service, aervlce trucks and general shop use. Designed tor ease In mobility per- \ mining efficient operation under cars, 1 trucks, etc. Rugged construction, fully 1 guaranteed NOT TO BE CONFUSED A WITH LIGHTWEIGHT SUBSTITUTES. H

(C) TRANSMISSION ADAPTER - Designed for use with floor |ecks. Remove the saddle from the Jack and replace It with thia transmission adapter to convert jack to a transmis sion jack. Wt. 30 lbs. 1030477 ......................

59.99

Litt Range Overall Lgth. Width Low (Ins.) High (ins.) (ins.) (Ins.)

14400

WT. 68 lbs. 1030303

TRAILER it TONGUE •■i_JACKS SAVE

27% on \0700«3

259"

1030469 .........

(A)STANDARD

A B

TOP WIND

Wt. (lbs.)

14.96 17.00

88 120

(A) SWING BACK TYPE - 11” Lift. Fits a tongue up to 3-1/2" x 5". 5-1/2" caster swivels 360°. 550 Lb. capacity. Wt. 16 lbs. 1070093 - REG. 54.99 SALE PRICE UNTIL MAY 22, 1993 (A) SWIVEL BACK TYPE - Similar to above - 1,000 Lb. capacity. Swivels to a horizontal position for transport. Provides up to 9-3/4" of lift. Fits a tongue up to 3-1/2" x 4-1/2” Plated for corrosion resistance. Full 360 swivel caster. WL 17 lbs. 1070077 ................................................ (B) RIDGED TYPE - 16” Lift. Fits a tongue up to 3-1/2" x 5”. 5-1/2" Caster swivels 360°. 550 Lb. capacity. Wt 13 lbs. 1070101 ........................................................................................

39"

74.99

MECHANICAL IMPLEMENT *•«*>^ ?ALHEhAyYhtDUTY'MP^MtENTJAC^S' Available in two heights each with two mounting styles. JACKS FLANGE MOUNT has spring-release catch to hold jack In vertical or horizontal position. RING MOUNT is locked in position with easy to remove pin.

SIDE WIND

Type Mount

A A B

Flange Flange Ring

Closed Ht

Open Ht.

10" 15" 10"

20" 30"

20 SALE PRICE until MAY 22. 1993 B Ring 15 30" SALE PRICE until MAY 22,1993

1 44

C C D D

AIR HYDRAULIC FLOOR SERVICE JACK SPECIFICATIONS:

kyv

25.59 46.50

49.99

19.68 31.50

5.12 5.50

• 22 Tons capacity at 85-200 PSI • 8-3/4" Min. Saddle Height • 4-3/4 in. Ram Lift • 4-1/4" Screw Extension • 17-3/4 in. Max. Saddle Height i JK. • Overall Length 20" • Overall Height 57" IjT ) • Overall Width (at front wheel) 13" • Frame i. ‘ [ Height 6-3/4" • Operating Air Pressure 85 to *

k 200 PSI. Net Wt 88 lbs. 00000 JP* 1030279............................................... 009

Flange Flange Ring Ring

10 15" 10” 15"

20" 30" 20" 30"

Wt. (lbs.) 12-1/2 16-1/2

ITEM

PRICE

1050244 1050269

36.99 39.99

12-1/2

1050251

36.99 24.99

16-1/2

1050277

12-1/2 16-1/2 12-1/2 16-1/2

39.99 27.99

1050384 1050400 1050392 1050418

39.99 41.99 39.99 41.99

«’»asr- ^

SViU’VI

We have a variety of colours of Plasti-kote automotive touch-up paint. Check with your nearest Princess Auto store for colours available! 6450399 can

V9,

*rcif KTj -

fcj

S'59

HYDRAULIC BOTTLE JACKS Electrostatically painted to prevent corrosion. Heavy duty steel saddle for secure Hfts. Heat-treated large diameter extension screw. Capacity Low Ht. Lift Screw Extensions High Ht (techee) (tows) (inches) (Inches) (Inches) 2 1-3/4 13 8-3/4 4-1/2 4 2-3/8 7-3/4 5 151/8 8 3-1/4 17 8-1/2 5-1/4 8 3 8-3/4 5-1/2 17-1/4 12 3 9-1/4 5-1/4 17-3/8 20 16-M 10-1/2 5-1/2 SALE PRICE UNTIL MAV 22. 1993

ITEM 1010487 1010496 1010503

19 99 25.99 33.99

1010811 1010529

45.99 87 99

1010837

97.99 f.4.99

Professional Series HYDRAULIC JACKS Screw

Ram Capacity (tons) 2 3 5

6-1/4

8 5-3/4 8-1/2

nr12 20 30f 50f 12 Low* 20 Low*

Closed __ _ (Inches) 7-1/8 70/2

Lift Extension (Inchea) (Inches) 2-3/8 4-3/4 ♦®4------------2-3/4 3-1/4 3-1/2 3-1/2 4

5.7 7.7 12.1 15.2 ~ÏB~ 22i

9-1/3 W72

10-3/4 31.5 11 55 12 7 __________ 14.8 8-1/4 26 7

6-3/4

~wa

7 2-3/4 3

3-3/4 4

Weight of Jack (pounds) 1010164 1010016 1010024 101Ö032 1010040 1010057 1010065 1010479

127.99 249.99 449.99

1010099 1010107

127.99

loidooi

* LOW PRORLE JACK R.V. and TRUCKER SPECIAL - Designed speciflcslly to fit under resr axle where a standard unit would be too high. t STOCKED IN WINNIPEG ONLY! Please order direct or through your nearest PRINCESS AUTO STORE

JACK STANDS

PROFESSIONAL SERIES LONG STROKE HYDRAULIC JACKS > *

lift Cap (ton.) 31-1/2

Ret. Ht. (In.)

Ext Ht. (In.)

Stroke (In.)

22-1/2 24

40-1/2 41-1/8

18 17-1/8

Base Size (hi.) 4 x 4-1/2 4-1/8 X 5

ITEM

PRICE

1010420 104.99 1010321 134.99

LONG STROKE HYDRAULIC JACKS 3

24 24 24-1/4

44 20 4-3/4 x 6 1010552 94.99 44-1/4 20-1/4 4-3/4 x 5-1/4 1010313.119.99 44 19-3/4 5-1/4x6-3/4 1010339 134.99

19" AMMO BOX Heavy gauge metal. 26"L x 10"W x 10"H. 3480944

795

1090554 1090547

39 99/pr. 66.99/pr

1-1/2 TON CAPACITY DUAL WHEEL DOLLY

SCISSOR JACK 1 Ton Capacity. Min. Ht. 4-1/2” Max. Ht. 13-1/2" Wt. 5-3/4 lbs. 1090281

ITEM 3 Tons 6 Tons

• Designed for easy removal, Installation, and handling of dual wheels and large single wheels. • Heavy Duty Rotating Lift Arms for easy lug alignment • Built-In Convenient Tool Tray • 2 Ton Capacity Hydraulic Power Unit for easy lifting • Adjustable Height Push ^ ‘

1“°717

499"

k 1|

J ■

PLEASANTAIRE VENTILATING FANS <-

FEATURES: • MOTOR: Totally Enclosed. Ball Bearing with Thermal Overload Protection * FAN BLADE: Heavy gauge Aluminum, Well Balanced * HOUSING BOX: Rugged Steel Welded Construction with Durable Baked Enamel Finish ■ MOTOR MOUNT: Heavy Welded Steel Rod • SHUTTER: Aluminum Louvres Supported By Long LHe Nylon Bearings. PRICE ITEM Opening Fan Free CFM Needed Dla. Blade HPAir 1/4 1/4 1/3 1/3 1/3

12" 16" 18" 20" 24

15"X15" 19"x19“

1,580

2.500 3,600

0772343 0772210 0772319

21" x21" 23”x 23“ 27”X 27"

3.500 3,585

157.99 184.99 199.99 219.99 259.99

0772301 0772202

REPLACEMENT FAN MOTORS - Are available by SPECIAL ORDER)

TEMPERATURE CONTROLS

TWO-SPEED VENTILATING FANS Fan Blade HP («HQ_________ 10' 18-

1/40 1/3

Free Air Opening Needed ITEM (dm)_______ (Inches)

690/560 3,600/1,900

13113 21 x 21

0772364 0772667

250 WATT MERCURY VAPOUR YARD LIGHT

139"

0707018

REPLACEMENT PHOTOELECTRIC CONTROL 0702738 ......................................................................... REPLACEMENT 250W BULB. 0707026.........................................................................

25.99 24.99

175 WATT MERCURY VAPOUR LIGHT Precision die cast aluminum housing. Mounting arm extends 6” from housing. Replaceable twist-lock photo control for dusk-lo dawn operatlo O'aH. height 16-1/2". Houalng dla. 13-1/2“. 176 watt bulb Included. 0700197 .

79"

25.99 HIGH PRESSURE SODIUM LIGHTS

0702739

Energy efficient high pressure sodium lights. Inltal cost may be higher but the fact that they use less power and last much longer will result In savings In the long run. 70 Wan high pressure sodium gives as much light as a 175 watt marcury vapour light. A 150 watt equals a 250 watt Replaceable twist-lock photo control for duskto-dawn operation, Sturdy die-cast aluminum constructlon for durability. 70 WATT UGHT - 9" Housing dla. 0700823 ................................................ REPLACEMENT 70 WATT BULB.

119"

150 WATT LIGHT - 12" Housing die. 0700631 ................................................... REPLACEMENT 150 WATT BULB.

TWO SPEED - Manual switch. 0772632 .............................................. .

59.99 16.99

QUARTZ HALOGEN FLOOD LIGHTS 500 WATT FLOOD LIGHT 0703512 ......................

18"

REPLACEMENT 500 WATT BULB. 0703520 ................................................

300 WATT FLOOD LIGHT 0705426 ..................................................... REPLACEMENT 300 WATT BULB. 0705467 ...................................................

9.99

19" 7.99

TYPE SJTW - Rated 300 Volts. 0704957-16/3.59Cft.

TYPE S - Rated 600 Volts. 0700203 -143 .. 99C tt

0704940-14/3.69(5/«.

0703405-12/3

1.59/ft.

0703835-10/3

1.99/ft.

RUBBER CORD CONNECTORS

14.99

PHOTOELECTRIC CONTROL

0700649 ..............................................

SMGLE STAGE - For above fans.

0770066 ...........................................

109.99 269.99

ELECTRICAL CORDS

REPLACEMENT 175W BULB.

0700633

PRICE

.. 34.99

139"

0700656 ................................................................. REPLACEMENT PHOTOELECTRIC CONTROL 0702738 .........................................................................

36.99 25.99

MALE PLUG. 0700146.......

329

FEMALE PLUG. 0700138.............

MOTOR with^

JUS SQUIRREL YJ

CAGE

115 VAC Motor. Squirrel cage measures 3" dla. x 1”. 1/4" Sha«. O’all. Dim." 4-1/4" x 3-1/2" x 3". ^0770594

INDUSTRIAL DUTY ELECTRIC MOTORS These open drip proof motor* art total 1er workshop machlno*, grain loadtra, wotor pump*. Me • The 1,450 PPM motors ara Mool raplscomonl motors on sir eom-prosoora. • All motors ara rsvsraltols except 3 HP « Ball bearing*. • Capacitor start

Full 115V/230V Load Amps @ 115 115/230

8.4 B.6/4.3 10.8/5.4 12.0/6.0 14.0/7.00 17.8/8.9 18.0/9.0 19.8/9.9 25.0/12.5 22/11 ~/15.0 -23 -23.0

II 5/230 115/230 115/230 115/230 115/230* 115/230 115/230* 115/230 -230 -230* -230 *Sultable For 208 Volt Operation

Shaft

RPM 1,725 1,725 1,725 3,450“ 1,725 3,450 1,725 3,450 1,725 3,450 3.600** 3,450

5/8'

manual

5/8' SS

manual manual manual manual manual automatic manual manual manual manual manual none

5/8' 5 85/6' SB5/8" 7/8' 5/8' 5/8' 7/8'

1,740

1-1/8'

**CCW Rotation Only

Rsaot Overload Protection 20 22 24 26 34 30 38 35 42 37 41 56 80

0750125 0750158 0750166 075017« 0750182 07501<X) 075020« 0750266 0750224 0750273 0754507 0754881 0754770

177.99 206.99 299.99 399.99

t Spilt Phasa Motor

1/2 TO 10 HP FARM DUTY CAPACITOR MOTORS • Totally Enclosed

• Continuous Duty • Fan Cooled * Manual Thermal Protection • Ball Baarlnga • Reversible Full Load Amps @ 115V230V 9.6/4.8 10.8/5.4 14.4/7.2 17.6/8.8 23.8/11.8 —/14.5 -23.0 -/32.0 -/41.0

Volta 115230 115230 115230 115230 115230

1/3 HP ELECTRIC MOTOR

109"

1/10 RPM TIMER MOTOR

Shaft

1725 1725 1725 1725 1800 1800 1800 1800 1800

5/8' 5/6' 5/8'

5/8' 1-1/6' 1-1/8' 1-3/8* 1-3/8“ 1-3/8'

ITEM

PRICE

0750000 0750018 3750026 0750034 0750042 0750069 0750087 0750075 0750083

124.99 156.99 167.99 208.99 312.99 380.90 524.99 614.99 759.99

ELECTRIC MOTOR REVERSING SWITCH

110 VAC. 7.5 Amps. 1,725 RPM. 5/8” Shaft. Totally enclosed fan cooled capacitor start 0750596 ..........

RPM

For starting, stopping and reversing electric motors on tools, hoists, conveyors, stc. Rated up to 1 HP, 110220V, single phaae. 0701441............................

56"

12 VOLT DC MOTORS 1,600 RPM. Reversible. Totally enclosed nonvent Hated. 5/8” Shaft Ball bearings. Continuous duty. Ideal lor grain augers, 4I| pumps, Ians, chemical leaders and other 12 volt portabls equipment

125 VAC 3 Watt CW. 3/16" -10 Tooth Drive. 2-1/4” x 2” x 1-1/4”.

0751172

HP 1/4 12

PRICE Full Load Amps 22 41

ITEM 0755512 0755520

279.99 331.99

1-1/2 HP ELECTRIC MOTOR This motor is dssignsd for greater efficiency and draws only 14 amps- This results in a 1-1/2 HP motor that will operate on a standard household circuit It Is ideal for pressure pumps, saws, blowers, etc. SPECIFICATIONS: 1-1/2 HP. 1,800 RPM. 115/206/230 volt. Totally enclosed fan cooled with manual overload protection. 5/8' Shaft WL40lbs.

0750356

FURNACE FAN MOTORS • *

115 Volt Sleeve Bearings Reversible Thermally Protected HP

Speed

1/4 1/3 1/2

1725 1725 1725

• • • -

1/2' Shaft Resilient Base Mount Continuous Duty Open Drip Proof

Amps 4.0

6.3 7.2

WL 13 20 20

ITEM

PRICE

0753699

83.99 94.99 99.99

0752741

0755868

1725 RPM, 1/2* shaft ball bearing Air-over motor. Wt. 16 lbs 0750133

104"

TOTALLY ENCLOSED TABLE SAW MOTORS These totally enclosed fan cooled dust tight motors are designed specifically lor use on table saws but ara also suitable for use In any dusty condition. Capacitor start Manual reset overload protection. Ball bearing. Rigid base 56 Frame. Shaft ITEM PRICE Wt. HP Volts Full 115V/230V Load Amps @ RPM 3/4

115/230

9.8/49 12. .0/8.0

SALE PRICE UNTIL MAY 22, 1993 16.4/8.2 1-1/2 115/230

3,450

5/8'

3,450

5/8'

3,450

(■»-)

5/8'

28 38

0754879

144.99

0754887

129.99

0754895

209.99

109.99

2 HP and 5 HP COMPACT ELECTRIC MOTORS Volts Amps RPM Shaft Ola.

5 HP 230 22.0 J.740

18.4/97-93 1,740

1-1/8-

7/8'

O all. Dim. (less shaft) 15x11-1/2x10 L' x H' k W' Weight 90 lbs. ITEM 0754747 PRICE

2 HP 115/206-230

484”

11-1/4x8-1/2x8-1/2 45 lbs. 0754739

289”

f STEPPING MOTOR

1/36 RPM TIMER MOTOREN

12 VDC MOLON STEPPING MOTOR - 4-Wire. 1/4" Shaft. O'all. Dim.: 4-1/2" x 2-3/8" x 2-1/2".

0750943

These two downsized motors are ideal to use when you want more power but don't have room for a larger motor. The 2 HP is the same physical size as a 1-1/2 HP and the 5 HP is the same size as a 3 HP. They make excellent replacement motors to increase the power. Both are totally enclosed and fan cooled. Reversible. Manual overload protection. Continuous duty. 60-Cyde single phase.

85 VDC 3 Watt. 1/4" -12 tooth drive. O1-1/2". s«. Dim.: 2" x 2-3/4” x 0751156

GENERATORS

(A)GENERATOR

(B) LONG RUN GENERATOR

(A) FEATURES: - Totally Brushless Design • Revolving Field Construction • High Surge Capacity • All Copper Windings ■ Convenient Electric Receptacles ■ Sealed Ball Bearings • Drip-proof Enclosure • Claas F Insulation • Lightweight • Four Cycle Engine • Aluminum Alloy Head. ______________________________________________ PRICE Engine Type Watts O'all Dim. Volts Amps WL ITEM Rated ConL Max. (L‘ iW'i H-) (lbs.) 120 A 2.200 2,500 18.3 5 HP Briggs A Stratton 72 0740860 679.00 21 x 16 x 16-1/2 A 4,400 5,000 120/240 36.7/18.3 6 HP Briggs A Stratton 25 x 17-1/2 X 17-3/4 116 0740678 640.00 (B) This generator has an Induatrtal/Commerclal Briggs and Stratton engine for long run service • Roll Cage With 8 Gal. Fuel Tank ■ Totally Brushless Design - Voltage Plus " -Revolving Field Construction - High Surge Capacity - AN Copper Windings - Circuit Breakers Standard - Sealed Ball Bearings - Waterproof Enclosure - Class F A H Insulation - Solid State Engine Ignition - Installed Rubber Vibration Mounts - Cast Iron Head Engine Volts O'all Dim. Type Watts Wt. ITEM PRICE 0baj_____________ Coni. Max. (L" x W‘ x H“) 120/240 8 4,400 5,000 8 HP l/C BriggsA Stratton 32" x 23* X 28.7" 143 0740069 1000.00 (C) 5,000 WATT POWERF1ST GENERATOR WITH A 8 HP HONDA MOTOR • Totally Brushless Design • High Surge Capacity - Sealed Bearings - Waterproof Enclosure - Low Oil Shut Off - Recoil Start • Roll Cage Frame. Engine Wt. Volts ITEM PRICE Type Watts O'all Dim. ConL Max. (L” x W" x H') (lbs.) 120/240 30" x 21“ X19.5" 136 0741280 1549.99 C 4,400 5,000 8 HP Honda

VANGUARD POWERED GENERATORS • 16 HP Vanguard Engine • Twin Cylinder Engine With Overhead Valves • Low Oil Shut-Down and Pressure Lubrication • Low Vibration and Super Low Tone Muffler. 8.000 WATT MODEL 7,500 Watt continoua, 8,000 Watt max. 120/240 Voll 62.5/31.3 Amps. O'all. Dim.: 32" x 23' x 28.7*. WL 211 Iba. 04-f 099 0740027 .................................................................................................... C. 1 IS#

■T

r«r«r«.

10.000 WATT MODEL 9.000 Watt continuous, 10,000 Watt max. 120/240 Volt. 79.2/30.6 Amps. O'all. Dim.: 32' x 23" x 28.7'. Wt. 229 lbs. 000099 0740019..................................................................................................... 4!OS#S# 10,000 WATT MODEL stocked In Edmonton, Mississauga, Winnipeg, Saskatoon and Calgary. Please order direct or through your nearest PRINCESS AUTO STORE.

ELECTRIC GENERATOR

[«

»1

Convorts 12 Volt DC to 115 Volt AC on demand.

3.000W output. 2.600W of continuous rating. 120 Vott, 21.6 Amps. Two ’’ 120 voltt grounded recep- i tacles. At leest a 5 HP engine Is required tor full electrical output. 7/0* shaft ^ with 3/16* keyway. Can be "Si run CW or CCW. Shaft speed must be 3,800 RPM. 0740001 - REG. 436.00 SALE PRICE until MAY 22,1993...............

m i

'V 1,800 WATT MODEL - Ou*ut 120 VAC, 18 Amps. O'all DfM--16-3/4" I 6-8/8" I 9-1/2". WL 52 lbs.

144348

3,000 WATT BELT-DRIVEN GENERATOR

BATTERY CHARGERS

(B) 30/2 AMP CHARQER/160 AMP BOOSTER - Eadly chargaa all 6 and 12 volt automotive type battarlas from motorcycla to die »el tractor • Heavy duty damps assura soeurs connections even on side terminal batteries.

174®*

4273124

(C) SOLAR 360 BATTERY CHARGER/BOOST ER - • 40 Amp Charging Rate • 27S Amp Boost • 6 and 12 volts. 4273132 ............................................................................. (C) SOLAR S60 BATTERY CHARGER/BOOSTER/ TESTER - • Four-In-One versatility • 60 Amp Discharged Battery Rating Charger - For 6 and 12 volt automotive type batteries • 425 Amp Booster/Battery Tester - Checks 12 volt batteries for percent of charge, charge rate and frozen, shorted or sulfated batteries • 6/12 Volt Charging System Tester - Checks lor faulty voltage regulator, alternator, wiring harness, or loose fan belt 4273140 .............................................. (C) SOLAR 660 FLEET BATTERY CHARGER/BOOSTER • 6, 12 and 24 volt charging • Voltmeter and ammeter test for su Mated batteries, proper polarity, open circuits snd proper charge rate for m a Intenan ce free batteries • 60 Amp Charge Rate • 426 Amp Boost’ Taro Hour Time Control with Hold Position For Automatic Shut Off or Continuous Charging. 4273167.

249"

314"

(A) 1 S/2 AMP CHARGER/100 AMP BOOSTER • Charges 6 and 12 Volt Batteries - Higher charging and boosting rates reduce precharging time to minutes. 4273116

AUTOMOTIVE GAUGES

389*®

DUAL BATTERY ISOLATOR 4Ë EQUUS Isolator allows both your automo tive and auxiliary batteries to charge while driving but auto matically Isolates so that the automo live battery will never be drained by non-automotive accessories.Use with 6 to 36 volt negative ground battery system and a 95 amp (max.) alterna tor or generator. Approx. Shpg. Wt. 1 lb.

PRINCESS AUTO carries GAS SAVER VACUUM GAUGES and TACHOMETERS. We have a large variety of AUTOMOTIVE GAUGES In stock. Included are Oil Pressure Gauges, Temperature Gauges, Amp Gauges and Voltmeter Gauges. Visit a PRINCESS AUTO store for complete selection. fÊÊÊÊÊk

RUBBER BODY TRACTOR and UTILITY 12V LAMP 4251807-5" dla. 4251815-6" dla.

14.99 21.49

29"

4200242

POWER CONVERTERS

HEAVY DUTY INDUSTRIAL MODEL - Instantly converts 12 Volt DC power from engine alternator into 110 volt DC power. Run most handheld power tools, lights fi and heating elements. Use with up to 105 Amp alternators. Everything necessary for Installation including wiring diagrams. 4250577

«EQUU6 TEST and TUNE-UP EQUIPMENT

PRINCESS AUTO carries a wide selection of AUTOMOTIVE TEST and TUNE-UP EQUIPMENT!

f THERMAL SWITCH Normally closed. O’all. Dim. 1" x 1-1/4" x 5/8". 6050298

99e.a

ALUMINUM FAN BLADE 10 Bladed tan. 4" Dla. 3/16" bore. 0770560

99*.. 65

PRINCESS AUTO - YOUR HYDRAULIC SPECIALISTS POWERSTROKE UTILITY CYLINDERS

HEAVY DUTY IMPLEMENT CYLINDERS ■ ■ • •

Designed For Agriculture, Industry, Construction and Mobile Applications Can Be Used As Double Acting or Single Acting Built To S.A.E. Specifications • 2,500 P.S.I. Working Pressure Rated At 4,000 P.S.I. Shock Load

ft*

I I t "*

*** Stroke

• Largest Selection ol Stock Cylinders in Canada • 1.5* to 6" Bore • 4' to 48’ Stroke • Hard Prechromed Piston Rods for Corrosion Resistance • Honed D.O.M. Tubing for Prolonged Seal Life and Smooth Operation * All SHUR-UFT Cylinders Are Pressure Tested For Weld and Seal Integrity * Cylinders 2,500 PSI Working Pressure * Rated @ 4,000 PSI Shock Load • Our Precision

10" 2" Bore 1’ Pinholes 1-1/4' Rod Dla. 1/4’ HPT Port Size

Meet or Exceed CSA Spec. «Z299.2, Ford Spec. 0101 and Military Spec. #MIL-1-45208 and 4DND1016 Insuring Maximum Quality. Stroke Retracted Extended Length Length 1-1/2’ bore 3/4* dla. pinholes 1/4' NPT port size Base pineye width 2' Rod pineye width 2' 1,767 lbs. push @ 1,000 PSI

2’ bore 1* dla. pinholes 1/4* NPT port size Base pineye width 2-3/4’ Rod pineye width 2-1/4* 3.140 Iba. push @ 1,000 PSI

6* 8° 10'

8’ 10" 12’ 14’

16"

18’ 20“ 24" 30" 32"

36" 40" 48"

12" 14’ 16" IB-

16" 18’ 20" 22"

24' 26" 28" 32" 38" 40" 4448"

se"

1* 1*

16’ 20" 24" 28’

r 1’

24’ 28’ 32"

36" 40" 44" 48" 56" 68" 72’ BO"

ss-

104-

Shaft Wt. ITEM PRICE Size (lbs.)__________________

1-1/4" 1-1/4" 1-1/4" 1-1/4’ 1-1/4" 1-1/4’ 1-1/4’ 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4’

7 8 9 10

11 13 15 17

21 23

25 29 31 33 38 SI

1205087 1205095 1205103 1205111

1200146 1200153 1200161 1200179 1200187 1200195 1200203 1200211 1200229 1200237 1200245 1200252

1200260

96.99 101.99 106.99 114.99

116.99 121.99 126.99 131.99 136.99 144.99 149.99 159.99 175.99 184.99 199 99 209.99 233 99

Continued on Page 67

12" 14’ 16" 18’ 20’ 24’ 10’

2-1/2’ Bore 1* Pinholes 1-1/4’ Rod Dla. 3/8’ NPT Port Size

12’ 14* 1618’ 20* 24

3" Bore I’ Pinholes 1-1/4* Rod. Dla.* 1/2’ NPT Port Size

10* 12’ 14’ 16* 18' 20" 24’

Retracted Length 20-1 4' 22-1 4’ 24-1/4" 26-1 4’ 26-1/4’ 30-1 4’ 34-1 4" 20-1/4* 22-1/4’ 24-1/4" 26-1 4" 28-1 4’ 30-1 4’ 34-1 4" 20-1/4’ 22-1 4’ 24-1 4" 26-1 4" 28-1 4" 30-1/4’ 34-1/4’

i-~

ITEM

PRICE

20 22 23 24 25 27

1201060 1201078 1201086 1201094 1204882 1204890 1204908

123.99 128.99 135 99 139.99 147.99 152.99 161.99

30-1/4’ 34-1/4’ 38-1/4’ 42-1/4’ 46-1/4’ 50-1/4’ 58-1/4*

21 23 25 27 28 29 31

1201128 1201136 1201144 1201151 1204916 1204924 1204932

139.99 146.99 150 99 159 99 170.99 175.99 187 99

30-1 4’ 34-1/4’ 38-1/4*

23 26 27 29 30 31 33

120116» 1201193 1201201 1201219 1204940 1204967 1204965*

151.99 156.99 18099 166.99 183.99 190.99 21099

28 30 32 35

1201243 1201250 1201268 1201278 1201300 1201318 1201334

199.99 174.99 181.99 199.99 211.99 221.99 239.99

Extended Length 30-1/4’

Wt pbe.) 18

34-1/4’ 38-1/4’ 42-1/4’ 48-1/4’ 50-1/4’ 58-1/4’

42-1/4* 46-1/4’ 50-1/4* 58-1/7’

•24" Stroke 3’ Bore Cylinder has 1-1/7" Rod Dia. 10’ ~ 20-1/4’ 30-1/4' 3-1/2" Bore 12’ 34-1/4* 22-1 4" 1* Pinholes 14" 24-1/4" 38-1/4* 1-1/4" Rod Dia. 16’ 42-1/4*__ 1/2" NPT Port Size 26-1 4" 10" 30-1/4’ 20-1 4’ 4 " Bore 12’ 34-1/4’ 22-1 4" 1' Pinholes 16" 26-1/4" 42-1/4* 1-17" Rod Dla. 17’ NPT Port Size

34 38 43

CONTINUED FROM PAGE 66 8" 10" 2-1/2" bore 12" 1* dia. pinholes 14' 3/8* NPT port size 16" Base plneye 18" width 3-1/4" 20" Rod plneye 24" width 2-1/4" 30" 32" 4,908 lbs. push 36" @ 1,000 PSI 40" 48"

3" bore 1 ’ dia. pinholes 1/2" NPT port size Base plneye width 3-3/4" Rod plneye width 2-1/4" 7,068 lbs. push @1,000 PSI 3-1/2" bore 1* dia. pinholes 1/2" NPT port size Base plneye width 4-1/4" Rod pineye width 2-1/4" 9,620 Iba. push @L00OPSI__

4’ bore 1-1/4'dia. pinholes 1/2" NPT port size Base pineye width 4-3/4" Rod plneye width 2-1/4" 12,566 lbs. push ® 1,000 PSI

8" 10" 12" 14" 16" 18" 20" 24" 30" 32"

36" 40" 48" 16* 18" 20" 24"

16" 18" 20" 22" 24"

26" 28" 32" 38’ 40" 44" 48"

56* 16" 18" 20" 22" 24"

26' 28" 32" 38" 40" 44" 48"

56" 24"

26"

36"

28" 32" 44"

48"

56"

8" 10" 12" 14" 20" 24" 30" 32"

17" 19" 21" 23"

36" 40" 48"

29" 33"

39" 41" 45" 49" 57"

24" 28" 32"

36" 40" 44" 48"

56" 68" 72" 80" 88’ 104* 24" 28" 32"

36" 40" 44" 48"

56" 68" 72" 80" 88" 104" 40" 44" 48"

56" 80" 104"

25"

29" 33" 37" 49" 5769" 73" 81" 89" 105"

1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2"

13 15 17 19 21 23 25

1200278 1200286 1200294 1200302 1200310 1200328 1200336 1200344 1200351 1200369 1200377 1200385 1200393

129.99 133.99 143.99 153.99 158.99 168.99 172.99 183.99 211.99 219.99 240.99 246.99 261.99

1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4"

16 20 22 24

141.99 147.99 149.99 160.99 169.99 180.99 186.96 208.99

1200401 1200419 1200427 1200435 1200443 1200450 1200468 1200476 1200484 1200492 1200500 1200518 1200526

1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4"

34 37 39 44 66 83

1200575 1200583 1200591 1200609 1200633 1200658

187.99 209.99 214.99 236.99 304.99 323.99

1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2" 2"

30 33 36 38 54 60 70 81 88 95 105

1200666 1200674 1200682 1200690 1200724 1200732 1200740 1200757 1200765 1200773 1200781

192.99 195.99 201.99 207.99 247.99 269.99 312.99 330.99 351.99 362.99 397.99

29 33 39 46 50 57

26 29 33 38 46 53

60 69

230.99 238.99 270.99 278.99 304.99

............................... 372.99 5" BORE x 24" STROKE. ITEM 1200997 ............................ CLEARANCE 374.99 5" BORE X 48" STROKE. ITEM 1201045 - WAS $574.99 See our large catalogue for complete specifications on 5" BORE CYLINDERS. NOTE: Retracted and extended lengths of cylinders are measured center of pinhole to center of pinhole.

8” HEAVY DUTY AGRICULTURAL IMPLEMENT CYLINDERS ___________ Bore 8" Stroke. 20-1/4" Retracted Length. 28-1/4* Extended Length. 1" Pin-holes. The shaft is threaded to accept a mechani vides cal stroke control. This pro easy adjustment and setting of cylinder stroke.

2" 2-1/2 3" 3-1/2" 4"

Rod Dia.

Port Size

1-1/4" 1/4" NPT 1-1/4“ 3/8" NPT 1-1/4" 1/2" NPT 1-1/4” 1/2" NPT 1-1/2" 1/2" NPT

TIE ROD HYDRAULIC CYLINDERS »

Wt. (lbs.) 17 19 21 26 32

ITEM

PRICE

1201052 85.99 1201110 91.99 1201177 96.99 1201235 103.99 1201292 129.99 tinders ins Included

- Dual Porting - Both bottom ports are tapped for ports In-line or at 900 without special ordering - Dual Backups on Piston Seal. Back-up washers on each side of the piston O-rlng prevent extrusion and seal twisting for longer life - Wider, Cast iron Bore Shaft WT. pistons provide superior bearing charac _____ Size (lbs). ITEM PRICE 2" teristics for longer life under higher 1 1/8" 18 1206044 72.99 operating conditions - Positive Rod Seal others 2 1/2" 1 1/8" 21 1206143 78.99 3" Most cylinder sizes with U-cups, 26 1206242 82.99 1 1/4" with O-ring, seals as standard for maximum 31/2" 11/4" 29 1206341 91.99 4“ seal action and cycle life endurance 1 1/2" 35 1206440 128.99 • Rolled Threads - Rolled threads on the 3/8“ NPT port on 2” bore. tie rods provide greater strength over cut Others 1/2“ NPT. threads * Extra Seal Protection - Tube O-ring seals are reinforced by back-up washers for improved sealing and added endurance • Heavy Duty Clevises - Ductile Iron clevises for stronger tolerances to twists and shocks that cause fracturing.

DEPTH CONTROL VALVE This depth control mounts on a hydraulic cylin der and can be set, so the cylinder will return to the same depth setting each time it is activated. Ideal for use on seeders, cultivators, 3-point hitches, or any use where precise depth control Is required. ITEM 1240027 ........ Hydraulic Cylinder not included

99"

__lUittiamA HIGH PRESSURE HYDRAULIC PISTON PUMPS THE "POSITIVE-POWER PACK’ WILLIAMS PUMP - I« a compact rtwalbta completely hII I contained hydraulic power unit. Pump, reaervolr and control valves are all In one unit. The over I all efficiencies of a piston pump remain nearly constant over a wide pressure range and volu! metric efficiencies remain high through a wide temperature range. All Interior perts submerged I in oil for longer life. Lever control arm and cable holder are mounted on the reservoir and conL nected to the valve spool. The valve then can be operated from a remote position with a wire control cable. 1" shaft supported Heavy gauge reservoir with filler pipe Alter. 3/8" porta.

N NO.

23-7

Platons 2**

24-7

43-15

44-15

34-21

50-4-4R-21*

Dlspl. Cu. In.

Rec. RPM'a

Max. RPM

Control Valve

GPM • Pressure Setting

Tank (Qa) 7

0.45

300-1,000

Single Acting

3400

0.45

300-1400

Double Acting

3,000

0.45 300-1,000 1.6 ____________________ 300-1,000

3.3

Single Acting

3,000

0.9

300-1,000

3.3

Double Acting

3,000

Wt. ITEM PRICE (lbs.)_________________

8-1/8L11QH X 11-1/4W

1220011

34849

7 9-1/8L x 10H 35 1220003 349 99 _________« 11-1/4W__________________________

9-1/BL x 10H 11-1MW

3460920

359.99

15 15-3/BL x 10H _ _ *11;1«W

1220037

279.99

1220029

415.99

Double 3.500 Acting__________

0.9

Relief Valve O'all. Dim. (Inch—)

15-3/8 xlOH x 11-1/4W

2.35 100-1.000 8.6 Double 3,000 __________________________ Acting__________

20-3/4L x 13-1/2H x 12W

1220045

599.99

3.48

20-3/4L x 13-1/2H x 12W

1222355

72740

Max. 1,000

12.8

2 Double Acting

3,000* 4 1,500

“This pump has two double acting control valves One has a 1,500 PSI relief valve setting the other Is set at 3,000 PSI. This pump is Ideal to use with a truck hoist it you also wish to operate a drill nil auger or some other equipment with a hydraulic motor. REPLACEMENT BREATHER CAPS - For Williams Pumps. 1252923 ................................................................................ 4.19

WittiamA

TWO-STAGE HYDRAULIC PUMPS

Model No.

Dlspl. Control Max. RPM Cu. In. Valve D58X-6-21 0.88 Double _____________________ Acting______1,800

GPM 9 Max. RPM up to J 250 PSI 6.0**

F98X-6-21

2.64

Double Acting

1,000

10.0

F98X-6K21

2.64

Double Acting Automatic Detent

1,000

10.0**

GPM O Max RPM from 1250 to 3,500 PSI 1.5

Tank (qts.) 21

2.5

O'all. Dim. (Inches)

Wt. (lbs.)

ITEM

PRICE

20-3/4L x 13-1/2H x 12W

1220060

685 99

20-3/4 x 13-1/2H x 12W

1220078

469.99

20-3/4L x 13-1/2H X 12W

1221100

727.99

** NOT CARRIED IN ALL STORES - CAN BE SPECIAL ORDERED. ALLOW 3-5 DAYS.

BARNES W900 SERIES HYDRAULIC PUMPS :

W900 SERIES PUMPS are pressure balanced tor excellent volumetric efficiency. Pump construction la heavy duty cast iron end caps and aluminum gear housing Standard rotation la clockwise. Pump Is reversible for CCW rotation, see Instruction I sheet. Pu mp can be used In a wide variety of areas Including agricultural equipment, ~ material handling equipment, dump trucks, gas engine driven applications, and many others, Pump haa SAE TYPE "A" Two-Bolt Flange and la Interchangeable with several other brands. SPECIFICATIONS:

(ÊIÉ ]

Type W9A111

Cu. In. GPM 9 Dlspl. 2,000 RPM .671

5.80

Max PSI 47400

_________________ _________________ W9A123

1.403

12.14

3,500

Max RPM

Shaft Rotation

Dia. x. Ext. (Inches) 3,600 CW/CCW 3/4 x 1-1/4 _

Port SizesOut

1-1/16-12

____(#12 ORB)

2,800 CW/CCW 3/4 X1-1/4

1-5/16-12 («16 ORB)

7/8-14

Wt. 8.0

(#10 ORB) 7/8-12 #12 ORB)

9.6

TIE-ROD HYDRAULIC CYLINDERS #8 ORB Ports. 1" Pinholes

ITEM PRICE (Inches) (Inches) 1222140 239.99 1222132 249.99

CHAR-LYNN "H" PLUS SERIES ORBIT CHAR-LYNN LOW SPEED, HIGH TORQUE ORBIT MOTORS are adaptable to many low speed applications, eliminating gears, shafts, chain, belts, pulleys and other V speed reduction components. Compact and light weight in proportion to the torque and power dellv- > ered. 1" shaft. Instantly reversible 1/2" NPT ports, p* Capacity up to 15 GPM. MODEL 1001 Max. capacity 12 GPM. Shpg. Wt. 16 lbs. FOUR MODELS are now available In either 2-Bolt as well as 4-Bolt SAE "A” FLANGE MOUNT ,

3 YEAR WARRANTY

SALE PRICE UNTIL MAY 22, 1993 MODEL NO. 101-1001

101-1025 101-1002 101-1026 101-1003 101-1027 101-1004 101-1028 101-1005 101-1006 101-1007 101-1008

FLANGE

10 GPM @ 1,000 PSI TORQUE RPM

CU. IN. DISPL/ REV.

4-Bolt 2-Bolt 4-Bolt 2-Bolt 4-Bolt 2-Bolt 4-Bolt 2-Bolt 4-Bolt 4-Bolt 4-Bolt 4-Bolt

2.8 2.8

787 787

4.5 4.5 5.9 5.9 9.7 9.7

496 496

(lb. In.) 347 347

545 545 699 699 1,189 1,189 1,394 1,751 2,215

383 383 232 232 200

11.3 14.1

160 126 99

17.9 22.6

2,788

15 GPM O 1,000 PSI RPM

946* 946*

TORQUE (lb. in.) 340* 340*

744 744

506 506 651 651

575 575

1,123 1,123 1,320

348 348 300 242

1,661 2,096 2,630

190 150

MAX. PSI

ITEM

REG. PRICE

1,800 1,800 1,800 1,800 1,800 1,800

1220128 1220219 1220136 1220227 1220144

231.99 231.99 239.99 239.99 248.99 248.99 255.99 255.99 275.99 285.99 315.99 335.99

1,650 1,650 1,600 1,450 1,350 1,250

1220235 1220151 1220243

1220169 1220177

1220185 1220193

SPECIAL PRICE

181.99 189.99 198.99 205.99

* MODEL 1001 and 1025 - Max. flow is 12 GPM. RPM and Torque are for 12 GPM @ 1,000 PSI.

CHAR-LYNN "A" PLUS SERIES

3 YEAR WARRANTY

The Char-Lynn A Plus Series motor is designed for use in light duty applications. Instantly reversible. Capacity up to 12 GPM continuous, 15 GPM Intermittent. Max. 1” shaft with woodruff Key. 1/2" NPT ports. 4-Bolt flange mount.

Model

130-1001 130-1002 130-1003 130-1004

Cu. In.

10 GPM 9 1,000 PSI

Displ7 Rev.

RPM

2.8 4.5 5.9 9.7

793 497 382 231

Torque (lb. In.)

Max. PSI

316 510 671 1,139

1,100 1,100 1,100 1,100

ITEM

PRICE

1221001 1221019 1221027

199.99 209.99 215.99 221.99

1221035

CHAR-LYNN 2,000 SERIES ORBIT MOTORS •HIGHER TORQUE • HIGHER PRESSURE

A® HIGH PRESSURE BLOWER

The Char-Lynn 2,000 SERIES DISC VALVE MOTORS - High torque, low speed hydraulic motors. Continu ous cap. up to i 20 GPM and a contlnuous max. of 2,000 PSI. 1-1/4" Shaft. 7/8”-14 O-Ring (#10 ORB) Ports.

3 YEAR WARRANTY. ' i -■ Cu. In. Model OlspIV __________ Rev.

104-1022 4 9 104-1024 8.0 104-1026 11.9 104-1028 18.7

10 GPM « 1,000 PSI RPM 448 282 187 120

Torque (lb. In.)

650

115 VAC,

1,070

901 568

1,645 2,610

380 241

Torque (lb. in.)

570 960 1,550 2,360

Max. PSI

ITEM

2,000 1220508 ]2.000 1220516 ;2,000 1220524 |2,000 1220532

PRICE

399.99 412.99 424.99 444.99

3500 RPM, thermally protect ed. Approx. 140 CFM free air. Can be used to provide pres sure or vacuum. Inlet and outlet 2-3/4” dla. O'all Dim.: 14" x 15" x 15-1/2". l Wt. 40 lbs. Vo772582

583V 69

WEBSTER HYDRAULIC GEAR PUMPS and MOTORS "K" SERIES PUMPS Are expressly designed to meat today's require ments for higher pressure multi gear pumps for -circuit hydraulics In mobile a nd other applications.

SERIES Type

Cu. In. Dlspl

3.88 3.88

1.94 1.94

K YC

2,000 R PM 30 30 16

Max. Rotation RPM

PSI

2,500 2,500 2,500 2,500

2,750 2,750 3,000 3,000

YC "PLUS SERIES" Type

Cu. In. Dtapl.

YC “Plus" YC "Plus"

1.94 1.55

CCW CW CCW CW

Shaft 1" 1" 3/4" 3/4"

"VC" SERIES PUMPS Combina high efficiency with exceptionally com pact daslgn. Theaa featuraa make It an ideal pph aeries tor hydraulic a cations where space is at a premium and weight Is a critical factor. Ports Inlet Outlet 1-5/8 -12 ORB 1-5/8 -12 ORB

'i£ f “YC” SERIES ITEM PRICE Wt. (lbs.)_________________

1-5/16"-12 ORB 1-5/16'-12 ORB

18 18

1220441 359.99 1220458 373.99

1/2" NPT 1/2" NPT

7 7

1220474 207.98 1220482 207.99

1" NPT 1“ NPT

These units can be used as either s pump or a motor They are bl-rotatlonal and can be run either CW or CCW. Ports Max. Rotation Shaft Max. Wt (Ibe.) PSI RPM

G PM O 2,000 RPM 16 13

3,000 3,500

2,500 8,000

CW/CCW 3/4” CW/CCW 3/4"

1-1/16"-12 ORB 1-1/16"-12 ORB

8 8

ITEM

PRICE

1220466 1220490

249.99 238.99

“WEBSTER” HELICAL GEAR TYPE HYDRAULIC PUMP/MOTOR THIS HELICAL GEAR TYPE PUMP/MOTOR IS DESIGNED FOR HIGHER PRES SURE OR GREATER SPEEDS!

FEATURES:

• Instantly Reversible • Helical Gear Construction For Quiet Operation .. . Compact In Size • 5-3/8" ht. x 7-1/4" Igth. x 5" wide * 3/4 " Inlet and Outlet Ports, and 1/4" External Bleed Port • 3/4" Keyed Shaft • Standard SAE TYPE "A" Flange Mounting. Wt. 16 lbs. 1220433 ........................

299"

As A Pump

As A Motor

Dlspl. 1,000 RPM Cu. In. per Rev.jlnput HP GPM 1.53 4.4 6.0 Torque Lbs. In per 100 PSI 24.3

1,750 RPM 1,500 RPM GPM I Input HP GPM Input HP 11.0 9.4 7.8

2,000 RPM Input HP GPM 12.7 9.0

1,500 RPM Output HP GPM

2,000 RPM Output HP GPM 14.9 7.0

1,250 RPM Input HP GPM 7.7 5.6

6.7

500 RPM Output HP GPM 1.7 5.0

3.5

1,000 RPM Output HP GPM

6.3 5.2

11.6

Vane Type Hydraulic Pumps • Counterclockwise Rotation. Reversible with minor adjustment • Max. 1,500 PSI • Speed Range 500-2,000 RPM MODEL TB SERIES equipped with 3/4" shaft Inlet and 1/2" outlet. Wt 11 lbs MODEL TC SERIES equipped with 1" shaft, 1-1/4" Inlet and 1" outlet. Wt. 17 lbs. MODEL

GPM O 500 RPM

2.38 3.61 TB12 TC16 TC20

r GRESEN’ TC24

4.20

6.60 8.65 10.80

GPM O 1,800 RPM 9.31** 14.72 17.95 25.25 31.40 38.80

ITEM

PRICE

1220284

311.99 311.99 311.99 385.99 385.99 385.99

1220292 1220300 1220326 1220334 1220342

** NOT CARRIED IN ALL STORES - CAN BE SPECIAL ORDERED. ALLOW 3-5 DAYS.

12 voltN SOLENOID The 3 terminal type grounded at the base. Ford Type starter solenoid.

y99

4217469 .

FOOT MOUNTING BRACKETS FOR ABOVE PUMPS. (A) 4-HOLE BRACKET (GRESEN TB Pumps). 1250026.......................... (B) 6-HOLE BRACKET (Gresen TC Pumps). 1250018 ..............................

18.79 18.79

12 VOLT HYDRAULIC POWER PACKS These 12 Volt DC POWER UNITS can be used (or many applications including cranes, (arm machinery, material handling, dump trucks, tailgate lifts and many others. All units are self-contained with a 12 VDC motor, hydraulic pump and 3 qt. oil reservoir. SPECIFICATIONS: • Pump flow 2.9 GPM @ 1,000 PSI, 1.4 GPM © 2.000 PSI • Relief Valve is set © 2,500 PSI and is adjustable to 3.000 PSI max. pressure • Pressure and return ports are 9/16-18 SAE straight thread (#6 ORB).

(A) SINGLE ACTING For use with single acting hydraulic cylinders. A manual lever starts the electric motor to pump oil to the hydraulic cylinder. Cylinders are held In a fixed position when lever Is in neutral position. Moving the lever in the opposite direction allows oil to return to reservoir and lower the cylinder. 1270313 ....

499"

(B) SINGLE ACTING Similar to above except electrically engaged with solenoid operated lowering feature Integral with unit. Cylinders are held in fixed posi tions until solenoid Is activated which allows oil to return to reservoir and retract cylinder. (Unit comes without remote control.) 1270446 ............................................................................................. REMOTE POWER CONTROL - For above.

519" 72.99

1279975 ....................................................................................

(C) DOUBLE ACTING For use with double acting hydraulic cylinders. Unit has a 10 ft power cord with one button for power up and another button for power down. 1/4' NPT ports. 1270339 .........................

675"

12 VOLT DUAL VALVE POWER PACK

POWER PACK RESERVOIRS

This power

These reservoirs replace the reservoirs supplied with the above power packs when It Is desirable to have a larger capaicity oil reservoir. Reservoirs come corn plete with rell el return tube, main return tube, suction tubes, suction screen, breather, seals, and gasket. Capacity ITEM PRICE Size (inches)

10qt 16 qt.

6-1/2" X 8" X 12" 6-1/2" x 8" x 18-1/2"

1279983 1279991

82.99 134.99

pack has a 12 VDC motor, hydraulic pump, reservoir and 12 VDC valves. The pump displacement is 0.129 cu. InVrev. and delivers 1.7 GPM © 1,450 PSI © 180 Amp draw. The reservoir holds 2 qts. of oil. The valves are designed to operate one single acting cylinder, and one double acting cylinder. A typical appli cation would be on a snowplow where the single acting valve would be used to lift the blade. The double acting valve could adjust the angle of the blade. The unit comes with a control panel that is mounted in the cab with a 10 ft. power cable to the power pack. The control panel has two rocker switches. One for up and down, and one for left to right. 1/4" NPT ports. 1270438 ........................................

829"

12 VOLT CLUTCH PUMPS

m Type Poly-Groove Poly-Groove V-Bett V-Belt

Webster® WEBSTER QUICK SILVER SERIES CLUTCH PUMP UNITS pro- W vide a compact and efficient source of hydraulic power for popular trucks or most off-rod vehicles. 12 Volt DC electric clutch and specially designed mounting bracket. On/Off switch In the cab controls pump. Operates only when needed even when the vehicle Is moving. Cu. In Dlapl. 1.25 1.94

1.25 1.94

9 6 9

27 18 27

Tank Port (inches) 1-1/16-12 1-5/16-12 1-1/16-12 1-5/16-16

(#12 (#16 (#12 (#16

ORB) ORB) ORB) ORB)

Pressure Port (inches) 7/8X14 (#10 ORB) 1-1/16x12 (#12 ORB) 7/8-14 (#10 ORB) 1-1/16-12 (#12 ORB)

ITEM

PRICE

1270388 1270420 1270362 1270370

457.99 488.99 414.99 447.99

HYDRAULIC KICK-OFF VALVES

IDEAL FOR LOGSPLITTERS Hydraulic kick-off valvaa are designed primarily for logapllttara. Handle la spring return to neutral In ona position, and datant In the opposite posi tion. Pull handle out to extend cylinder. Returns to neutral when released. Push handle in to retract cylinder and the detent will hold the handle posi tion. When the cylinder is retracted the handle returns to neutral position. When the handle la In the detent position the cylinder automatically retracts leaving the operators hands free to place another log In position (A) RATED « 20 GPM - System relief valve Is factory set 9 ■? ; 1,500 PSI 9 10 GPM It can be adjusted for a range of 400 to 2,500 PSI • 10 GPM and 1,200 to 2.500 PSI 9 20 GPM. 1/2" NPT work ports, 3/4” NPT Inlet and outlet ports. Detent relief cartridge non adjustable. Wt. 8-1/2 lbs. 1242296

(B) RATED UP TO 18 GPM - Max pressure 3,000 PSI. 1/2" NPT work ports 3/4" NPT inlet and outlet porta. 5-1/2 lbs Wt. 1242304

103"

HANDLES

GRESEN

EXTRA

103"

if*'.

L A

HIGH PRESSURE DIRECTIONAL CONTROL VALVE

GRESEN S’ MODEL V15 MONOBLOCK TYPE DIRECTIONAL CONTROL VALVES - Provides parallel circuit operation for open center and dosed cen ter systems. (Optional closed center plug Is required for closed center sys tems.) They are available in 1, 2, and 3-spool configurations and offer economy and excellent performance In a compact design. SPECIFICATIONS: Valve(s) - 4-Way, 3-Poaltlon, Nominal Rating - 15 GPM, Operating Pressure (max.) - 3,500 PSI, Filtration required (min.) - 33 Micrometer, Inlet and Work Ports - #10 ORB. Outlet Ports - 12 ORB.

VERTICAL HANDLE. 1242437 ............................ HORIZONTAL HANDLE. 1242411 ............................

25.99/ea. 25.99/ea.

No. of Spools

GRESEN » V15GTX-4-RPA V15GTX-4-4-RPA V15GTX-4-4-4-RPA

Wt. (lbs.)

ITEM

PRICE

(less handles) 1242403

2 3

13-1/2 18-1/2

1242387 1242460

181.99 238.99 311.99

CONVERSION KITS are available to convert the above valves to closed center or power beyond.

GRESEN

V-20 DIRECTIONAL CONTROL VALVES

The V-20 VALVE consists of four work sections with end covers. The entire assembly is bolted together to form a complete valve. All sections are 4-way, 3-posltion. Parallel circuit. Approximately 20 GPM 9 2,500 PSI. Adjustable relief valve set 9 2,500 PSI. Work sections have #10 ORB ports. Covers have #12 ORB ports. 1241488-COMPLETE ASSEMBLY ... Î» CONVERSIONS PLUGS ......................................... 14.99 1252824 - Closed Center Plug .........

569"

......................................... 18.99

I 1252832 - Power Be yond Plug ......... 5 4-WAY 3-POSITION WORK SECTION - Provides control of double acting cylln. ders or reversible hydraulic motors where free-wheeling is not required. Work neutral. ports are blocked in neutral position. Spring return to 1241470 ....................................................................................

115"

HANDLE.

O-RING SET - For one section. 1251818 3.59/set a

‘1

HYDRAWJC^PUMP

2.85 Cu. in. displacement. 28.4 GPM 9 2,500 RPM. Max. 3.000 PSI CCW rotation. 7/8" Shaft. 2-Bolt mount. #20 ORB inlet port #12 ORB outlet port. O'all. Dim.: 8” x 7” x 7". Wt. 13|bs. O1Q00 1220417.. NEW C. I y SWIVEL CONNECTORS are available or above pump to adapt ORB ports to NPT.

15.49

1242148

i J

HYDRAULIC CONTROL VALVES

Pressures up to 4,500 PSI adjustable relief. Selective hone fitted spool. (Hardened ground and chrome plated). Cap. up to 9 GPM. Built-In relief valve Rtf, Open center, spring return, 3/8" ports Wt. 8 lbs DOUBLE ACTING.

5 ~v UUil£iam\

GRESEN MONOBLOCK DIRECTIONAL CONTROL VALVES Parallel circuit valves. Open center is closed off during operation. Max. rating 20 GPM, 2,000 PSi.

2 SPOOL MODEL

1 SPOOL MODEL

3 SPOOL MODEL

mi mk

fjà\

SP MODEL FEATURES:

* Adjustable Ball/Spring Type Relief Valve. Factory Set @ 1,500 PSI Max. 2,000 PSI * Built-In Load Checks - One Check for ’A" Port Circuit and one for "B" Port Circuit • Control Handles may be mounted In "UP" or "DOWN" Position • Spring Return To Neutral 3/4" NPT Inlet and Outlet Ports • 1/2" NPT Work Ports • Double Acting • Open Center. 1 SPOOL SP MODEL Shpg. Wt. 15-1/2 lbs. 1240035 ......................

139.99

2 SPOOL SP MODEL Shpg. WL 24 lbs. 1240068 ......................

SPXTE MODEL FEATURES:

192.99

3 SPOOL SP MODEL 12*0100...................... Shpg. Wt. 32-1/2 lbs.

262.99

• Same as SP MODEL PLUS • Plugged Conversion Port Beside Outlet

Port Can Be Converted To Power Beyond (ITEM 12523994 Kit ) To Add Downstream Valves or Closed Center (ITEM 1252402 Kit ) for Closed Center Systems (i.e. John Deere). Optional. • Outlet Ports - Top (Plugged) and End. 1 SPOOL SPXTE MODEL 1241975

2 SPOOL SPXTE MODEL 1241967 .............................

151.99

SPKXTE MODEL FEATURES:

203.99

3 SPOOL SPXTE MOOEL 1241959

275.99

• Same as SPXTE MODEL PLUS • #1 Spool Has Float Position For

Cylinder Floating (I.e. Dozer Blade or Motor Freewheeling Capability). 1 SPOOL SPKXTE MODEL

1241983

172.99

2 SPOOL SPKXTE MODEL 1241991

234.99

3 SPOOL SPKXTE MODEL 1242007

306.99

CONVERSION KITS are available to convert the above valves to closed center or power beyond.

GRESEN

DIRECTIONAL CONTROL VALVES • 16 GPM - 1,550-2,000 PSI Adjustable relief is preset 0 1,550 PSI 3/4" NPT Inlet and outlet. 1/2” NPT cylinder ports. 400 HP VALVE - Standard open center 4-way 3-posltion valve designed to control a double-acting cylinder or a reversible hydraulic motor. The spool is springcentered to neutral position with ports blocked In neutral. 1240357 ............................................................................................. 300 HP VALVE - Open center 3-way 3-positlon valve designed to control a single act ing cylinder or an uni-dlrectional hydraulic motor. The spool Is spring-centered to neutral position with ports blocked in neutral.

84"

1240365 ...............................................................

105"

410 HP - Open center 4-way 3-position valve designed to operate hydraulic motors. Valve has detent 3-positlon. Ports are blocked in neutral position. 1240373- REG. 118.99 SALE PRICE UNTIL MAY 22, 1993 430 HP - Closed center 4-way 3-posltlon valve. All flow through valve is stopped when valve Is In neutral position.

88"

1240399 ..............................

SPECIALTY VALVES GRESEN

118"

(A) SPXT-F4-HP MODEL - Single spool, double acting with 3-posltlon free-fiow motor spool. Cylinder ports are open to tank In neutral, eliminated a dead stop on units having rotary momen tum.

1242130** ......................................................

161.99 15.99

3-POSITION DETENT KIT - For above valve. ITEM 1252428 ....................................................... (B) SSKXT MODEL - Specialty designed 2-spool float position valve that allows you to operate both handles at the same time. Plugged conversion port beside outlet can be converted to power beyond for use of other valves downstream 1242015 ........................ (C) SPW4 HP MOOEL - Rotary Spool Valve Is designed for Infi nite speed control of hydraulic motors In both directions.

296.99

1241942 - Less Handle “ NOT CARRIED IN ALL STORES - CAN BE SPECIAL ORDERED. ALLOW 3-5 DAYS.

178.99

FLOW CONTROLS

RELIEF VALVES

QRESEN

(A) UNE RELIEF VALVE - Externally adjustable from 700 to 3,000 PSI. It has a 3/4" NPTF »pill llna and 1/2" NPTF flow porta. ira* 124167« ................................................ (8) UNE RELIEF VALVE - Will handla up to 30 OPM flow and praaauraa from 700 to 3,000 PSI. Proaaura proaat & 1,600 PSI. Porta sizes ara 3/4" NPTF flow, 1/3' NPTF split. ITEM 1241647 - Direct ...................

63-

(A) PRIORITY TYPE FLOW CONTROL - Designed where two separate hydraulic po wer circuits are to be served from a single pump. Input flow up to 30 GPM • Adjust able controlled-flow range 1-25 GPM . Max. operating pressure 3,500 PSI • Port size «12 ORB.

1240670 ................................................. 131.99

(B) ADJUSTABLE FLOW CONTROL - Varies the flow 0-15 GPM. Operating pressures up to 2,500 PSI. Excess flow is not a work port. Wt. • lbs. 1240605-1/2" Ports ....................

95.99 145.99

1240613 - 3/4" Ports (C) FLOW (SPEED) CONTROL VALVE - Vary the speed of hydraulic motors, etc. 1/2" NPT PORT - 0-16 GPM. 114.99 1240985 ..................................... 3/4" NPT PORT - 0-30 GPM. 1240977 ..................................... (D) FLOW (SPEED) CONTROL VALVE - With built-in relief valve. 1/2" NPT PORT - 0-16 GPM. 1241009- REG. 135.99 SALE PRICE UNTIL MAY 22. 1993 3/4" NPT PORT - 0-30 GPM. 1241025 ................................................

114.99

79-

(q OR ESEN JL H EU g VALVES. Pressure Range PSI 100-1,200

Pressure Setting PSI

Perl Stzea

rr EM

1,200

1/2“ NPT

1242141

PRICE

SALE PRICE UNTIL MAY 22, 1093 1,201-2,000 1,201 2.000

2.000 1/2" NPT 2,000_______ *

*3/4’ NPT Pressure Port.

44 99

33.99

1242197 1242213

44.9« 43.99

1/2" NPT Tank Port.

MISCELLANEOUS HYDRAULIC VALVES

95-

135.99

SELECTOR VALVES A

(A) DOUBLE SELECTOR VALVE - Enables you to oper ate two separate functions with one valve. 3/4" Ports. Cap. 24 GPM. 1240449

;... 99.99

8 JO' (B) 2-WAY HYDRAULIC SELECTOR VALVE - 2.000 PSI. Direct oil-under pressure to two separate lines. 1240456 - 1/2" NPT Ports........... 1240464 - 3/4" NPT Ports........... 1240472 - 1" NPT Ports**...........

• »i-

75.99

58.99 68.99 94.99

SHOCK^ ABSORBERS 1-5/8" Dia. Body7-5/8" Long center to center. 7/16" and 3/8" mounting holes. 4210258 .............

(A) CUSHION VALVE - To eliminate or minimize shock, surge and overload on hydraulic equipment. Pressure O 2,500 PSI. 1240480-1/2" Ports** (B) LOCK VALVES - Designed to lock a cylinder or part of a circuit without leakage when control valve la In neutral position, pressure applied to unlock circuit. Pressures to 3,000 PSI. Capacity to 25 GPM. 1/2" porta. For Double-Acting Cylinders or Motors. 1240639 ......................................................... For Si ngje-Actlng Cyllnd er s 12406

£y

99.99 91.99

(C) FLOW DIVIDER - Divides single flow Into 2 equal flows Up to 2,500 PSI. Ports 3/4" NPT. Capacity 15 to 35 GPM. No return flow. ... 1240589

105.99

147.99

(D) FLOAT POSITION VALVE - Provides float position on standard 4-way valves (double acting cylinders) on snowplows, bulldozers, and similar equipment. 0 to 1,500 PSI. Capacity - 10 GPM, 2,000 PSI Max. 1/2" NPT ports. 1241199**

65.99

"NOT CARRIED IN ALL STORES - CAN BE SPECIAL ORDERED. ALLOW 3-5 DAYS.

REUSABLE HOSE MENDERS and COUPLERS

READY-MADE HYDRAULIC HOSE

m'&%M

WIRE BRAID HOSE with PRESSED ON COUPLINGS! All fittings are Male NPT. Hose and fittings are the tame size (l.e.: 1/4" hose has 1/4" fittings). We have 1-WIRE and 2-WIRE HOSE In 1/4", 3/8" and 1/2". 2-WIRE HOSE In 3/4” and 1" We carry a range of lengths from 1 ft to 14 ft.

Available for VO' 3/8", 1/2" and%«is Hi 3/4" hose. Can be used with 1- and 2-wlre hose.

By proper braiding this hose retains flexibility and with stands high pressures and rough usage. Cut to your desired length or save by purchasing in bulk! Available in 1-Wlre and 2-Wire 1/4", 3/8”, 1/2", 3/4" and 1". Sold by the foot or In bulk lengths of 20 ft., 30 ft. or 60 ft. depending on size of hose.

OIL RESERVOIRS Sturdy, general purpose hydraulic oil reservoirs cleaned and tested for leak-free performance. Comes with drilled mounting holes. ITEM PRICE Cap O'all. Dim. (gals.) (Inches) 4x12x13-1/2 3 89.99 1250034

W_-

Available for 1/4", 3/8", 1/2" and 1/4" NPT HOSE ENDS. Sold 39 In pair*. 99 FROM to OR

».

8x 16 x 15 8 x 16 x 24

*10

1250042 1251909

99.99 129.99

‘Can be mounted vertically or horizontally.

MALE TIPS

459,o789 REUSABLE HYDRAULIC HOSE FITTINGS

FROM

Available for 1/4", 3/8", 1/2", 3/4" and 1". 1-or 2-WIRE HOSE. Available with MALE NPT ENDS or 37° SAE FEMALE SWIVEL ENDS.

LINE-TYPE OIL FILTER QRESEN’ Install in return line. Built-in by-pass valve, full flow filtration with any petroleum base fluids, 10 micron | ^ throw away paper element. Ports 3/4" inlet and v outlet up to 15 GPM capacity 1250307 ....................

HYDRAULIC HOSE • Oil Resistant • Rubber Covered • High Tensile Strength Steel Wire Reinforcing

PIONEER (STANDARD) QUICK CONNECT and DISCONNECT COUPLINGS

\ vI

,JL

! )

22"

REPLACEMENT ELEMENTS 1250315-10 MICRON ... 8.29 1250323 - 33 MICRON ... 8.29

■

PRINCESS AUTO carries a variety of RESERVOIR BREATHERS.

SUCTION and RETURN LINE STRAINERS Can be mounted through the side wall, or through the tank top, Into a stand pipe. (A) SUCTION TYPE 10 GPM RATING - 1-1/4" NPT tank mounting. 3/4” NPT line con nection. 8". O'all. Length with 65 sq." screen area. 41.99 1251602 ............................................................................... (B) SUCTION TYPE 25 GPM RATING 2" NPT tank mounting. 1-1/4” NPT line con nection. 9-9/16". O'all. Length with 125 sq." screen area. 1251610 .........................................................................................

46.99

HYDRAULIC PRESSURE GAUGES 2-1/2" DIAMETER DIAL - With 1/4" NPT connection. 1250216 - 0-3,000 PSI - 0-200 bar ................................. 1250224 - 0-5,000 PSI-0-340 bar ........................................... GLYCERINE-FILLED HYDRAULIC PRESSURE GAUGES 2-1/2" dia. Stainless steel case. 1/4” NPT connection. 1250257 - 0-3,000 PSI-0-200 bar ................................... 1250265 - 0-5,000 PSI -0-340 bar .................................. 1252550 - 0-10,000 PSI ................................................... .

17.99 18.99

12 VOLT BACK UP/TAIL LIGHT Double lens light with back-up lens. One lens has a red lens with stopAum light and tall light. The other lens has a clear back-up light eurrounded by red reflective lens. Recessed mounting. 14-3/8" x 5-1/8". INCLUDES BULBS . 4210399 ...........................

PRESSES AND ACCESSORIES MODEL Frame Capacity

30 TON

»TON

ir*

Overall Haight

« «TON

w---- w..

—**----- J7-1S»-----W~

Overall Width Working Range

2-14-to

(Ram & Bad)

2-1/4*10

30-3/4*

Width between uprlghta

2* to

30-1/4* 13-7/8* -p* 14^4“” f--------------6

30’

Number ot Tabla Poaltlona

Table Poalton Increments

4-3/4*

Tabla Width ITEM

1118"

9-18-

7-1/8*

3481027

3461019

3481001

2-3/9*

5499a 4499. 299»

PRICE

Thaae praasaa are sold without hydraulic lacks. Thla glvaa you the option to uaa a hydraulic jack or the power pack/hydraullc cylinders shown below See page 60 tor a suitable hydraulic jack.

ELECTRIC/HYDRAULIC POWER PACK

IsstkapJIffH ”

Now you can have hydraulic

power wherever you have electric power. The unit has an electric motor that drives a 2-piston Williams hydraulic pump. SPECIFICATIONS: MOTOR - 1-1/2 HP, 1,800 RPM, 115 Volt14 Amps. PUMP - Williams double acting 2-piston pump. 1.75 GPM @ 2,200 PSI (Preset at factory). HOSES - 5 Ft. long 3/8’ 2-wlre with 3/8’ NPT ends. O'all. Dim.: 16" x 21* x 18*. 1270099 ...........

659"

TV PROJECTION LENS Adjustable lens. 90' angle. One lens measures 4” dla. The other measures 5-1/2” x 4". O'all. Dim.: 5-3/4” x0701193 9” x 6”.

199S 76

a lift HYDRAULIC power PACK CYLINDERS

designed to be used with the above shop presses as wall as lor a variety ot lifting, spreading, banding, straightening, pushing, pulling or clamping operations. 3/8’ NPT porta. Cap. Bore Stroke Ret. (tons) (In.) (In.) HL A B C

8 20 30

3 5 6

Base Plate

tTEM

PRICE

5-1/2 10-1/4 4* x 6.38* 1209006 135.99 5-1/2 10-3/4 6* X 8.50" 1209014 239.99 5-1/2 11-1/4 7* X 9.50’ 1209022 389.99

PIPE BENDER A heavy duty pipe bender that uses hydraulic power.

(4.5mm) B Type pipe. O all. Dim.: 21-1/2‘H x 24*W x 8’D. Wl. 105 lbs. 3461910

329"

INDIVIDUAL REPLACEMENT PIPE BENDER DIES are avails blel

10 TON SHOP

50 TON SHOP PRESS 79-1/4” Overall Height 30” Inside Width 3-1/2” to 20-3/8"

Distance between retracted ram & bed

Cylinder bores

10" Cylinder stroke Voltage

115/230 2

600

Wt (lbs.) ITEM

3461209

2199"

Complete Press

HYDRAULIC PRESS KIT This press uses a hand operated pump attached to a 10 ton ram. Bolt together frame. SPECIFICATIONS: • Overall Height 59" • Overall Width 33" • Width Between Uprights 20-3/4" -Distance Between Bed and Retracted Ram 3-1/2” to 33-1/2” • Bed Can Be Moved To Six Positions Each 6" Apart -Bed Opening 4-3/4" x 18-3/4” • Wt. 215 lbs. 3461894 ....................

499"

This kit includes the same Williams 2-Piston Hydraulic Pump that Is used In the 50 Ton Press. Also included are a gauge, hydraulic hose and fit tings. Used with a 6" cylinder to build a 50 Ton Press. Build your own frame attach a suitable motor and SAVE! 3461456

469.99

HYDRAULIC PRESS PUMP ONLY.

HYDRAULIC PRESS CYLINDER. 6" Bore 10" Stroke. 3461134 ...................... 399.99

359.99

3460920

3,000 PSI HYDRAULIC PUMP

12/24 VOLT HIGH PRESSURE POWER PACK Self-contained two-piston Williams pump. Beltdriven by 12/24V DC motor. Rated up to 3,000 PSI. 1.1 G PM @ 1,500 PSI @ 24VDC. 0.6 GPM@ 1,500 PSI@ 12 VDC. Unit consists of two-piston pump, 7-quart oil reservoir, double acting control valve. O'all. Dim.: 11-3/4"H x 15-3/4 "W x 22"L_ Wt. 90 lbs. 1270081 .

479"

•Develops 3,000 PSI * .75 Cu. in. per stroke -2 Ot. Oil Reservoir • Built-in Check Valves ■ Quick Release Valve - Completely Selfcontained, 3/8” NPT port. Designed for operating single 9 acting cylinders. Load is rated with hydraulic pressure: lower ing is accomplished by release of pressure and gravity. 1220953

GAS ENGINE HYDRAULIC PUMP KITS These power packs can be used anywhere. The units have a Briggs & Stratton Gas Engine coupled directly to a two-stage high/low hydraulic pump. The pumps are factory set at 650 PSI and deliver high volume at low pressure and low volume at high pressure. Inlet port 1” tube. Outlet 1/2” NPT. Model 5 HP 8 HP

Low Pressure Volume @3,600 RPM

High Pressure Volume @ 3,600 RPM

10.6 GPM 16.0 GPM

2.9 GPM 4.0 GPM

METAL BANDING 12" Long. 1/2" Wide. 5710082

. 79c

ITEM 1270305 1270123

PRICE

569.99 699.00

S*Äf

FLEXIBLE COUPLING

Aluminum body. Rubber spyder. 3/4" Bore x 3/4" Bore. O'all. Dim.: 2" Long x 2-1/8” Dla. 3850302 ..................................................................

V 77

20 TON HORIZONTAL/ VERTICAL LOGSPLITTER • 8 HP Brigg* and Stratton Engin* • Cylinder - 24" Strok*. 4-1/2" Bor* • Splitting Langtti - 24" • Ram Fore* - 20 Ton* • 2-Stag* Bam*a Pump • Automatic Kick-off Valva. Allow* both hand* to ba fr** to handl* apllt wood and a*t up a new log whll* cylinder la retracting • Cycle Time - 11.5 Sec. (no loed) 30 Sec. (full load and full extension) • Oil Reaervolr - 4.75 Gal*. • 5.30 x 12 High Speed Wheel* • Hitch - Fit* 1-7/8" Ball • O'all. 01m.: (horizontal) 85'L X 32'H x 47"W •2400026................................................................ Working Height (horizontal) 23" • Wt. 500 lb*.

1999"

10-1/2 TON LOGSPLITTER • 5 HP 4-Cycle BAS Engine • 2-Stage Pump • Log Capacity 18” • Automatic Kick-Off Valve. Allow* both hand* to be free to handle the *pllt wood and to *et up a new log while the cylinder I* retracting • Cycle Time - 4 seconds to fully extend - 4 seconda to fully retract - Varies with wood density • Ram Force -10-1/2 Ton* • Cylinder - 18” Stroke • 3-1/2” Bor* • Length - 62” • Width - 33” • Oil Reaervolr - 3 Gal. Cap. Wt. 260 lbs. 2400034 ..

149900

BARNES TWO-STAGE PUMPS PRINCESS AUTO offer* the BARNES Two-Stage mps Pumps In three sizes. See Chart. Two pu have four-bolt flange mount, and one has a two-bolt flange mount. 1” O.D. tube Inlet and 1/2" NPT outlet. 1/2" dla. x 1-1/2" long »haft. Pumps feature heavy-duty construction and durable needle bearings

, A

10.6 GPM 16GPM

Unloader Adj. Range*

2.9 GPM 4 GPM 6.1 GPM

22 GPM

Max.PSI Work.

HP Required Gas Engine

3,000 3,000 3,000

400-900 400-900 400-700

5 HP 8 HP 16 HP

These brackets are designed to attach the above hydraulic pump directly to a Briggs A Stratton Gas Engine. The bracket bolts to the engine. The pump bolts to the bracket and the engine and pump shaft connect with a flexible coupling. See page 118 for suitable couplings. ENGINE SIZE

PUMP MOUNT

3 or 5 HP

4-bolt - 2" bolt centers

8 HP*

16 HP

4- bolt - 2” bolt centers 2- bolt - 3-1/4" bolt centers 2-bolt

* Dual application will fit 2- or 4-bolt flange.

PRICE

207.99 276.99 415.99

18 Month Warranty

PUMP MOUNTING BRACKETS

ITEM 1221118 1221555 1222173

WT. LBS 1-1/4 3-1/4 3-3/4

ITEM

PRICE

2400463 1252899

44 95 59.99

1252907

89.99

WARRANTY

PARTS • SPECIAL ORDERS Can't find what you need in the catalogue? Need a big ger winch, ge nerator or do you just need a part off of one of our iti terns? We can help! We have access to thousands of Items not listed In our catalogue. Please inquire at your local Princess Auto store, or call toll free 1 -800-665-8685 for pricing and quick delivery.

RETURNS/EXCHANGES You may return your purchase to any Princess Auto Store or to the main Distribution Center In Winnipeg. Please Include your original sales slip with all returns. If returning Items by mall or freight company, first noti fy the store or the Winnipeg Customer Service Depart ment (1-800-665-8685), to help us assure your satisfac tion.

DAMAGES and SHORTAGES Before signing the Transport Company's Receipt, examine your shipment ent carefully, carefully. If It appears to be get tampered with or damaged, or there Is a shorta shortage of pieces, be sure to notei th is on the Oelivery Receipt, before you sign It If you DO NOT discover damage s or shortages until shipment Is unpacked notify the Trans port Company at once and request Inspection. ALL SHORTAGES AND DAMAGES MUST BE CLAIMED TO THE TRANSPORT COMPANY OR POST OFFICE. Then notify our Customer Service Department In Winnipeg at 1-800-6658685.

You can depand on Princess Auto's well known and respected warranty which provides you with double protection. First, Princess Auto's Royal Service Promise and second, the Manufacturer's Specific Warranty. Be sure to retain your original sales slip as the manufacturer requires proof of purchase for Warranty. Sorry, Ithese warranties DO NOT apply to products which ha ve been damaged by negligence, or accident, or altered, or repaired by others. PowerFist Hand Tools Have A Lifetime Warranty.

PRICES All I prices shown are Net F.O.B. point of origin (i.e. either a Princess Auto Store or the Winnipeg Distribu tion Center). Add Provincial Sales Tax If applicable, and 7% Goods and Services Tax to all orders. PLEASE NOTE: The 7% G.S.T. applies to the merchan dise as well as all shipping and handling charges. It Is Princess Auto's Policy to maintain catalogue prices for the life of the catalogue to the best of our ability. However due to changing market conditions beyond our control, PRICES ARE SUBJECT TO CHANGE WITH OUT NOTICE. This catalogue supercedes all previous catalogues and 993 these prices are effective starting April 14,1 We aim for the utmost accuracy In our catalogue adver tising, but the occasional error can occur. We apolo gize for any Inconvenience these may cause you and will correct any errors as soon as possible. Items may not be exactly as illustrated.

INDEX A

Air Accessories___31-32,

............................... 3539 Compressors .2531, 51 54 Aircraft Cable .. 30 Air Tanks........... 33-35 Air Tools ........... Ammunition Box ....... 60 Angle Drives......... 14, 48 53 Autobody Tools Axle Assemblies .. 42-43

Battery Chargers....... 65 65 Battery Isolator 48 Bearings .... 61-62,69 Blowers ........

Cable . Casters

54 11,41

Centrifugal Clutch .... 48 Chain......... 46 58 Chain Hoist Compressors, Air . 2531 Computer Screen....... 27 77 Couplers ... Crane........... 58 Cut-Off Saws Cylinders,

G Gaa Engines Gas Tank ... Gauges......... Gearhead Motors....... Generators .. Gloves........... Glue Sticks .. Grease Guns HandCart ... Hand Tools ... Head Lamp ... Hitches........... Holst............... Hubs .............. Hydraulic

4549

Paint Sprayers Pintle Hooks . Pipe Bender .. Power

12 45-46 54,58 42-43

59 59-60

52 50

L Latch Handle Lens.............

Gearhead .... Hydraulic ....

2527

K Keyboard

62-63

Motors Electric...........

S 61 21 2521

56 62-63 39 6570

Metal Box........... Mig Welders___ Mirror..................

Paint.................

Jack

Vapour Mercury Lights.............

66-68

Implement Jacks

F Foam Pad . Fuel Pumps Fuel Tanks

22 19

Cylinders ... 53 Flow Divider 59-60 Jacks ........... 6570 Motors ........ 7577 Press ........... Pumps ... 6572, 77-78 Valves 72-74

Components .... 47-48

Fans...........

39 64

Hydraulic . D Drive

Electric Motors Engines

M 48-49

46,50 53

Lights........ Loadbinders 50,61,65,75 46 78 Logsplitter .

Converter .. Tools...............

59 38

46 76 65 1519

7577

Presses ......... Pressure Pulleys Washer... 511 47 Pumps Fuel 52 Hydraulic .6572,77-78 Water 12-15

R Ratchet Puller Rectifier ......... Roller Chain .. Rubber Mount

54 31 47

Safety Equipment .... 39 22 Sandblasters ... 51 Seat Covers __ 74 Shock Absorber 58 Shop Shpp Crane Press __ 7577 Slide Hammer 58 Solenoid........... 13, 48 70 Speed Reducers 40 Speed Wheels ..

Springs

37,44 20 Steel ... Submersible Pump 14-15 Switch

T Tanks Air

35, 65

Fuel ....... Tarpaulins . Testers___ Timer......... Tires...........

65 28 40, 42-43 50

Tool Boxes Tools.........

1519,4546 2527 ........... Trailer Hitch Trailer Running Gear . 43 Truck Accessories 51 Truck Tool Box Tumbuckle ...

50 54

V Valves, Hydraulic . 72-74 Ventilating, Fans........61 W Water Pumps Welders........

12-15 2521

Wheel . Assemblies . 40, 42-43 Winches 55-58

TRoyeU Service P “ rcmicc NO SALE IS FINAL UNTIL YOU'RE SATISFIED! If you're unhappy with any purchase, simply return it and we will refund, replace or repair It!

STORE LOCATIONS:

OTTAWA

LONDON

SASKATOON

CALGARY

2267 Gladwin Crescent K1B4K9

4067 Exeter Rd., N6L 1C1 Ph: (519)652-2193 Fax: (519) 652-0259

610 Cynthia St. S7L 6A2 Ph: (306) 665-8022 Fax: (306) 664-9554

2020-32nd Ave. N.E. T2E6T4

535 Panet Rd., R3C 2W7 Ph: (204) 669-4252 Fax: (204) 669-4269

657 Henderson Dr., S4N 6A8 Ph: (306) 721-5115 Fax: (306)721-2696

Ph: (613) 247-1651 Fax: (613) 247-1657

KITCHENER 1373 Victoria St. N. N2B 3R6 Ph: (519) 743-0742 Fax: (519) 743-0033

MISSISSAUGA 1325 Eglinton Ave. E. (at Dixie), L4W 4L9 Ph: (416)238-5211 Fax: (416)629-7939 ORDER UNE: (416) 238-5504

WINNIPEG

WINNIPEG 3421 Portage Ave. W (at Cavalier), R3K 2C9 Ph: (204)831-8275 Fax: (204)831-0238

BRANDON 1828-18th SL N., R7C1A5 Ph: (204) 726-0601 Fax: (204) 729-9256

CATALOGUE SHOPPING TO ORDER BY PHONE: To order, call the Princess Auto Store nearest you, or our WINNIPEG DISTRIBUTION CENTER S TOLL FREE NUMBER at 1-800-665-8685.

TO ORDER BY MAIL: 1. Fill In the enclosed order form completely. 2. Include your daytime phone number In case we have a question about your order. 3. If you need additional space for Items, photocopy the blank order form or use a blank sheet of paper. 4. Indicate method of shipment preferred. 5. Indicate method of payment. (If Visa or Master Card, include the card's expiry date.) 6. List and subtotal Items required. 7. Add Provincial Sales Tax If applicable. 8. Add appropriate shipping and handling charges and C.O.D. charges (If applicable). 9. Add 7% Goods and Services Tax on all merchandise, shipping and handling charges, and C.O.D. charges. 10. Indicate total amount. PLEASE NOTE: No orders can be shipped with payment shortages. 11. Mail your order. Make your cheque or money order payable to Princess Auto Ltd.

REGINA

LETHBRIDGE 3018 - 2nd Ave. N. T1H 0C6 Ph: (403) 327-7300 Fax: (403) 327-1871

RED DEER 7419-50th Ave. (Gaetz Ave.), T4P 1M5 Ph: (403) 342-6181 Fax: (403) 346-6855

Ph: (403) 250-1133 Fax: (403) 291-2781

EDMONTON 11260 - 163rd St., T5M 3R5 Ph: (403) 483-0244 Fax: (403) 484-7080

GRANDE PRAIRIE 12822 -100 SL, T8V 4H9 Ph: (403) 539-1550 Fax: (403) 532-2757

KELOWNA 1850 Kirachner Rd., V1Y 4N6 Ph: (604)860-6191 Fax: (604) 861-8372

TO ORDER BY FAX: Fax orders can be sent to the Winnipeg Distribution Center's Fax No. 204-663-7663 or to the Princess Auto Store nearest you. See Store Fax number listed to the right.

SHIPPING INFORMATION: Aa a saving to you we ship Parcel Post (up to 60 lbs.) unless you request otherwise. Please refer to the chart at the right comer of thia page for parcel post charges. Please Indicate which method of shipment you prefer. Q Parcel Post □ Can Par □ UPS □ BUS □ Purolator □ Transport □ Other All orders received will be shipped the following day.

Nillo Hartlkainen

Murray Clark

To help celebrate our 60th Anniversary we have focused on the surplus side of our business, as the Iront cover of this catalogue shows. Our definition of Surplus Is: Items that are reusable, unique, reduced In price, a special pu rcli»M of a factory overrun, overstock, or discontinued lines. We have over 1,500 Items like this displayed in each of our stores. Our company has been In the Surplus business since World War II when army surplus was popuiisr At the forefront of our Surplus buying was Nillo Hartlkainen. He had taken his apprenticeship as an electrician in Finland before starting work at Princess Auto some 40 years ago. Nlilo developed a reputation as one of the moat astute Surplus Buyers In the business. When Nillo retired, Murray Clark took over this surplus buy ing tradition. You can see one of his favourite Items on the front cover end you can see one of his Items in the corner of almost every page In the catalogu e. Murray travels throughout the USA and Canada searching out these special deals. The unique products that become available and the lower prices are a great benefit to our customers.

WINNIPEG PARCEL POST SHIPPING and HANDLING CHARGES* . $5.00 0 to 15 lbs. .$10.00 $780 16 to 30 lbs. 31 to 40 lbs. $12.50 41 to 50 lbs. $15.00 51 to 60 lbs. •These rates DO NOT apply to the NWT and Yukon. Please call Winnipeg Customer Service Department for those rates at 1-800-665-8685

RAIN CHECKS

C.O.D. CHARGES*

In moat cases. Princess Auto will offer rain checks or suitable substitutes on sale Items, should they sell out before the end of the sale. Some Items may be limited In quantity so shop early to assure your satisfaction.

$3.50 for the first $100.00 0 to 60 lbs. 50c for each additional $100.00 •These C.O.D. CHARGES are In addition to the above shipping and handling chargee and only applies to par cel post C.O.D.'s.

SOLD TO: DATE __ NAME__

IF SHIPPING ADDRESS IS DIFFERENT THEN FILL IN BELOW SHIP TO: (PLEASE PRINT)

(PLEASE PRINT)

STREET OR ROUTE

CITY PROV. ______ POSTAL CODE PHONE______

anniversary

fêoyat Sexocce Piamide

NO SALE IS FINAL UNTIL YOU RE SATISFIED! If you're unhappy with any purchase, simply return it andwe will refund, replace or repair it!

CHECK ONE □ Post

Qty.

ITEM *

Catalogue

DESCRIPTION

PRICE (each)

Page #

TOTAL

□ BUS

□ Can Par □ UPS D Truck

D Purolator

#204 CHECK ONE □ C.O.D. U Cheque Visa or U MasterCard 0 Money Order ALL PRICES ARE F.O.B. WINNIPEG (l.e. The customer is responsible for shipping costs. ATTENTION CUSTOMER: Please include sufficient money to cover the cost of goods, Provincial Sales Tax (If applicabe), shipping and handling. C.O.D. fees and 7% G.S.T.

ir^Nj K - M I MoifwrCorcJ J

□□□□ □□□□ mm mm g[HE □□□ □□□ nnn

EXPIRY DATE

SIGNATURE

SUB-TOTAL ADD PROVINCIAL SALES TAX ADD SHIPPING and HANDLING (See page 80)______________ ADD C.O.D. CHARGES (If applicable) (See page 80) ADD 7% G.S.T. to all charges except P.S.T.

TOTAL

PRINCESS AUTO LTD. P.O. BOX 1005, WINNIPEG, MB. R3C 2W7 Phone Toll Free: 1 -800-665-8685 Fax.: 1-204-663-7663 NOTE: Liquids CANNOT be shipped by Mail or Bus.

'rv 1 J ■ 'i

CO CT>

5.70 X 8 HI-SPEED

TRAILER TIRE ASSEMBLY

Tir» mounted on a 5-Hole Wheel. See Page 43. ITEM 2026896 REG. $54.99 SALE

CM CM

> <

rA r

l$42"

22X11.00 X8 2-PLY TUBELESS ATV TIRE See Page 42. ITEM 2026227 REG. $76.99 SALE

*56"

o .C

SAVE

Tj-

38%

save

*33*

20 TON HYDRAULIC ^ 8” WHEEL ““ 5-Hole wheel only. ^ See Page 42. ^ ITEM 2024925 ^ REG. $18.25 SALE

BOTTLE JACK Height:

$1125

CO LU

SAVE

z Q

SALE

27%

5 z

TONGUE JACK Swing Back Type. 11* lift. FKa a tongue up to 3-1/2” *5*. 550 Lb. capacity. See Page 59. ITEM 1070093 REG. $54.99

o LU co

SALE

I i—

I 3 PACK LEATHER/ CANVAS

$39"

WORK GLOVES ITEM 5050372 SALE

z CO UJ Ü CL

$4",

/pkg. of 3 pair

aas

*64"

PECHAS]

TRAILER

o y-

Low 10-1/2“; High 15-5«*. See Page 60. ITEM 1010537 REG. $97.99

TnwRAD 1 uw 0AM *5000 Lb- Capacity • Towing Arma are fully Adjustable • Quick Release bar to be removed when not InPins use.enable * the tow „ ITEM 2081255 REG. $159 99

$QQ99

Range to Use with any electric drill. Jf Furnished with 220 grit. Replacement stones available j LIFETIME WARRANTY / | \ /\QQ k / ■ \ a ITEM 2914588 «IQ99? I V V REG. $33.99

SALE

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22, 1993.

o> <T>

PICKUP TRUCK RECEIVER HITCH • Class III • Fits Most Mid-Size and Full-Size Pickup Trucks. See Page 45. ITEM 4205001 ITEM 4205019 REG. $154.99

•o C CM CM

> <

o .c

PICKUP TRUCK RECEIVER HITCH • Class II • Fits Most Compact Trucks and Vans. See Page 45. ITEM 4201968 SALE REG. $134.99

Û-

L)PT°

26% COUPLER BALLS One piece construction. Chrome-plated. ITEM 4201513Ball Size 2", Bolt Size 3/4” SALE REG. $7.99 i ITEM 4201521 [ Ball Size 1-7/8”, Bolt Size 3/4" SALE I REG. $7.49

$g49 18" X 12" MUD FLAPS ITEM 4250304 \REG. $10.99/pair

spa

*55

Z if) LU

p o cc Q.

, \\

^4 TRAILER LIGHT KIT Contains Two Stop-Tail Lights with Built in Red Side Marker Lights. Licence Plate Holder with Light, Two Amber Clearance Lights and Wiring Harness. SALE ITEM 4200036

$24"

30 FT. X 50 FT. POLY TARP 10 x 10 Mesh. See Page 47. ITEM 2480655 REG. $154.99

f ji

< c/5 SALE

$99"

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14 TO MAY 22, 1993.

CO O) CD ■0 C CM 04

o JO rt

\nt*9 SA^' 14 GALLON PORTABLE AIR TANK See Page 31. ITEM 0432179 REG. $69.99 SALE

$43" SAVE

SOLAR m

^O00

PACER 2" SELF-PRIMING CENTRIFUGAL AGRICULTURAL PUMPS 3 HP B&S ENGINE 5 HP B&S ENGINE 165 GPM © 10 FT HEAD 200 GPM © 10 FT HEAD See Page 13. See Page 13. ITEM 5771563 ITEM 5771571 REG $379 99 REG. $319.99 SALE

cc CL

$24999

SALE

$29999

jeP50N

< > < Q C/) LU

Û LU

o Io LU

DUAL MIG WELDER

$699"

(/) (/)

x 1z V) UJ

o CC CL

LU < (/)

•105 AMP •110 Volt • Infinite Wire Speed & Heat Controls • Easily Converts to a Gasless Welder See Page 21. ITEM 0110031 SALE \REG. $849.99

1/2" ELECTRIC IMPACT WRENCH • Equal power forward and reverse • Up to 240 ft. lbs. of torque * Power input 115 volt • 7.5 amp AC/DC motor. ITEM 3411600 REG. $199.99

SAVE

UP 1°.

▼

32% MECHANICAL IMPLEMENT JACKS Ring Mount. 5000 lb. capacity. See Page 59. ITEM 1050251 Height: Closed 10"; Open 20". REG. $36.99 SALE

$24"

ITEM 1050277Height: Closed15"; Open 30". REG. $39.99 SALE

$2799

AIRLESS PAINT SPRAYER For the big jobs. For use with latex, oil base, barn paints, and fence, deck and exterior stains. Pumps directly from a 5 gallon bucket. ITEM 0450809 REG. $769.99 SALE

$59999

en O) JC

g11 ce O. < O 5" MULTI-PURPOSE VISE Jaw and 3 bolt mounting base swivels 360°. Weighs 85 lbs. ITEM 3431251 SALE REG. $99.99 NO RAINCHECKS

3 TON JACK STANDS Strong four-legged base design. 'Positive Lock' handle. See Page 60. ITEM 1090554 REG. $39.99 SALE

$-1788

$5488 *

/pair

epECt W

J////J

PURÇH«

tr Q.

< > < D

C/) LU Q LU

£ Z 3 PACK JERSEY WORK GLOVES Extremely comfortable. ITEM 5050455 SALE

$288 / 3 pair

SAVE

50%>

o H o LU

(/) </) X

1-1/2 TON CHAIN HOIST Can lift up to 8 feet. Excellent for farm, machine shops, freight depots, garages, etc. Wt. 34 lbs. SPECIAL ITEM 1580075 PRICE AFTER APRIL 17th, 1993 $199.99

HEAVY DUTY HAND CLEANER Fast, thorough cleaner. Cleans with or without water. Easy on hands. Fortified with Lanolin. 18 Oz. container. ITEM 6420251 SALE REG. $2.49

$-|24

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14th to APRIL 17th, 1993

Û.

if)

MAIL>POSTE 5T“ 7007

TO THE PURCHASING AGENT

KMTUAS TEA ■ plant ralum LAMl ONL Y »0 PfMMCtM AUTO LTD koi 1001. Wpg UanftotMi R.K 2W7 *n0 gtv« C to MOW 0VW( MmwM parly

.*Hr' I

"S'* £ * 3 HP PORTABLE COMPRESSOR • Belt Drive/Oil Bath -115 Volt • 7.9/6.5 CFM @ 40/90 PSI • 20 Gallon tank capacity

cc CL LU

H.D. PIPE BENDER Uses hydraulic power. Includes heads for 1/2‘, 3/4’, r, 1/-1/4-, 1-1/2* and 2" pipe. See Page 76. ITEM 3461910 REG. $329.99 SALE

22 PCE. COMBO WRENCH SET Sizes from 1/4* - 7/8* and

6mm - 19mm. LIFETIME WARRANTY. ITEM 2921146 SALE Compare At $45.99 NO RAINCHECKS

SALE PRICES ON THIS PAGE ARE IN EFFECT FROM APRIL 14th to APRIL 17th, 1993