How set up the HP Officejet Pro 9020 Printer?
• Remove the HP Officejet pro 9020 printer from the box. • Lift the scanner lid of HP Officejet 9020, remove the packing materials from the scanner lid, and then close the lid.
• Also, remove the packing materials from the exterior part. • Now, plug the power cord to the rear of the printer and the electrical outlet. • When the HP 9020 doesn’t turn on immediately, press the Power button on the printer.
• After turning on the HP 9020 printer, set the preferences on its control panel. • Choose your preferred country, language, and then click the Confirm option. • Open the front door of the HP Officejet Pro 9020 printer.
• Now, open the ink cartridge access door of HP Officejet Pro 9020 Printer Setup. Wait until the carriage stops moving. • Take the new ink cartridges from the box and insert it into their slots. • Always hold the black plastics of the ink cartridges and insert them.
• Now, close the cartridge door and then the printer door. • On the HP Officejet Pro 9020 printer’s control panel, click OK. • Now pull the input tray out and load plain papers in it.
• Adjust the paper guides until the edges of the paper rest on it properly. • Insert the input tray back into your printer. • On your HP Officejet Pro 9020 Setup’s control panel, click the OK option.
• When prompted to align the printhead, click the OK option. • Open the scanner lid. Place the scannable paper with the face down on the engraved glass. • Close the scanner lid now and then click the Scan option. The printer is all set to use now.
• When prompted to align the printhead, click the OK option. • Open the scanner lid. Place the scannable paper with the face down on the engraved glass. • Close the scanner lid now and then click the Scan option. The printer is all set to use now.
Click the Link Below to Know More:
“https://printer-setup.co/how-to-do-hpofficejet-pro-9020-printer-setup/”