How to Set Up HP Deskjet 1012 Printer?
Before you can un-box the entire printer package, it’s always safer to check if all the components are included in it. If you can see all the required components then grab the printer device out of the box. 1. Once you take out the 123.hp.com/dj1012 printer from the box, remove all the tape and packing substance off the printer. 2. If you lift the scanner lid you’ll see few more packaging materials surrounding it. Remove them as well. 3. Now close the scanner back to its place. 4. Open the printer and you’ll see an ink cartridge area. Remove the remaining packaging material from there as well. 5. Close the ink cartridge. Ink cartridge area is where you’ll place the color coded ink box in a few minutes. 6. Pull out the paper tray and removing the tapes. Put the paper tray back into the place. 7. Take out the wire that’s provided along with the package. 8. Plug in one side of the wire into the socket while the other into the back side of the HP printer. 9. You can see a small control panel (screen with touch icons). This section controls the entire functioning of your printer whether it performs a single print function or multiple functions such as copying, scanning, etc. 10. You can see a down arrow on the control panel, click on it. It asks your language preference. Go further down using the down arrow and select your language and tap ok. 11. Next it asks for country or region. Select your region and tap ok.