HP Laserjet Pro MFP M29w Installation
Quick Setup for First-Time Installation • Tear the tape on top of the box to open it. • Take the printer out of the box and discard all packing materials surrounding it. • Take the toner cartridge and remove the clips from it. • Handle both sides of the toner cartridge and gently shake them.
• Drag the orange tab to tear the sealing tape from the toner cartridge. • Align the toner cartridges along the tracks inside the printer. • Push the toner cartridge until it fixes into place. Close the ink cartridge access door. • Drag the output tray, input tray and their extensions. Mount stack of paper into the input tray. • Adjust the paper width guides against the edges of the paper. • Insert one end of the power cable to the printer’s rear and another end to the wall socket. • Switch on the printer. Install the driver on your system and your printer is now set.
HP LJPRO M29w Wireless Setup Windows: • Obtain the network name and password before configuring the printer to a wireless network. • Turn on the printer, system and the router. • Connect the system to a wireless network with stable internet access. • Keep the printer and the system close to the wireless router for a better signal strength. • Connect the Laserjet Pro m29w printer and the system to the same wireless network.
• Use the Wi-Fi Protected Setup process to connect the printer to the wireless network. • If the router is compatible with the WPS method, long-press the Wireless button on the printer’s control panel for at least three seconds. • Wait till the Wireless light and Ready light starts to blink. Press the WPS button on your router. • Wait for at least two minutes for the printer to establish the network connection.
Mac: • You need a network name and password for connecting the printer to a wireless network. • Switch on the printer, system and router. • Connect the system to a wireless network with an active Internet. • Connect the system and printer to the same wireless network. • Move the printer and system to the wireless network for strong signal strength. • Disconnect the USB cable from the printer’s rear if the system prompts.
• Follow the Wi-Fi Protected Setup method for connecting the printer to the wireless network. • Check if the printer supports WPS, if so, press and hold the HP Laserjet Pro MFP M29w Wireless Setup button. • Wait for the wireless light and ready light to flicker. • Press the PUSH button to establish the network connection. • Wait for at least two minutes when the printer establishes the network connection. • For More Info Releated HP LJPRO M29w Cissit Here:->
“https://printer-setup.co/ljpro-m29w/”
Thank You!!!