OKIDATA C9300/C9500 PRINTING ISSUE
Overview  We as a whole have encounters where the print quality isn't decent.
Give it a chance to streak lines on the sides, unclear edges, or grimy/non-white foundation, these sorts of issues for the most part can be unraveled by supplanting the toner or drum cartridges. In any case, every so often it's not the toner or drum that should be changed. http://printershelp.support/
1. Check and check whether the picture drum has been presented to light for a timeframe. Assuming this is the case, supplant the I/D unit. 2. Check and check whether the roller in the fuser is filthy. Assuming this is the case, supplant the fuser unit. 3. Ensure the paper thickness setting is right: Light: 64 g/m², Medium Light 64 to 74 g/m², Medium 75 to 90 g/m², Medium Heavy 91 to 104 g/m², Heavy 105 to 120 g/m², Ultra Heavy 121 to 203 g/m² Transparency. 4. Ensure the LED head get together is appropriately associated with the association board.
5. Ensure the +5V yield accurately sticks between the association board and the LED head gathering. If not then supplant the association board appropriately. 6. Check the link associations and supplant the low-voltage power unit if vital. 7. In the event that the 34V yield to the force connector pin 2 is not on the motor board (+34V: Pin 12, 13, 14), supplant the motor board appropriately. 8. Supplant the high-voltage power unit or belt tape get together if important.
9. Ensure the I/D unit terminal is legitimately associated with the contact get together. 10. Supplant the picture drum on the off chance that all the above strides don't bring about ordinary printing quality. The above techniques are prescribed to perform with expert professionals. It would be ideal if you contact printer backing or email us in the event that you have further request. Read more Reactivate your OKI printer under Mac OS X Snow Leopard
Contact Details http://printershelp.support/oki-data-printermultifunction-printers-tech-support/
800-760-5113
info@printershelp.support