The Retap Catalogue Kick-off 2012 Products for the pure pleasure of drinking water
Introduction Retap is a Scandinavian design company with offices in Copenhagen and Stockholm. Our mission is to transform the way you drink water. We started with the Retap bottle 0.5: an eco-friendly design product that is especially designed for drinking water. This was just the beginning. In 2012 we will continue replacing PET bottles with Retap bottles and we will present new products for the pure pleasure of drinking water. This catalogue provides you with all the information you need about the Retap products. It starts with our products available from the start of the year, then shows the product development for 2012 and in the end shows the options for printing and packaging. See for yourself: drinking water has never been this good. Best regards, Lars, Henrik, Robert & everyone at Retap
3
Table Of Contents
4
Available Retap Products
7
Retap Bottle 0.5 with colourful lid
9
Retap BottleTray 6
13
Retap BottleTray 4
15
Retap Dishwasher rack
17
Retap Product Development
19
Retap BottleSleeve
21
Retap Bottle 0.8 with colourful lid
23
Retap Bottle 0.3 with colourful lid
25
Options
27
Packaging
28
Printing
30
5
Available Retap Products
6
7
The Retap Bottle 0.5 (BRP03) Our world gets polluted by plastic bottles that not only harm the environment, but also our personal health. There needs to be a bottle that is especially designed for drinking water, so we designed the Retap bottle: a 0.5 litre bottle that is high quality, clean and eco-friendly. •
Extra strong glass
•
Dishwasher safe
•
Reusable
Specifications: Weight ∆: 166 g. (max: 170 g.) Height ↨: 190 mm. Diameter ↔ (max): 78 mm. Material: borosilicate glass (20% recycled)
8
9
Light Blue Lid
Magenta Lid
(LLB18)
(LM26)
Baby Blue Lid
Dark Blue Lid
(LBB34)
(LDB27)
Lids The lids for the Retap bottle match the Scandinavian design principal: less is more. High quality material and a beautiful, simple design. It perfectly fits the bottle. The material is more eco-friendly than plastic. It is also very durable and retains its shape. The lids come standard with the bottle, but they’re also available separately for everyone who likes more colours. Specifications:
Black Lid
Gray Lid
(LB24)
(LG21)
Bright Green Lid
Lime Lid
(LBG32)
Orange Lid
Weight ∆: 13 g. (max: 14 g.) Height ↨: 33 mm. Diameter ↔ (max): 43 mm. Material: silicone
(LL28)
Red Lid (LR31)
(LO20)
10
11
The Retap BottleTray 6 (TL38) The Retap BottleTray 6 makes it easy to carry up to six Retap bottles. The bottles are stable in their sockets, so there’s no risk of dropping them. It’s a classy way of bringing Retap bottles to the table or to meetings at the office. It is produced at a sheltered workshop. At this workshop disabled people are given a chance to participate in society. Specifications: Weight ∆: 405 g. Length ↔ (max): 362 mm. Width ↔ (max): 196 mm. Height ↨: 17 mm. Material: beech wood
12
13
The Retap BottleTray 4 (TS39) The Retap BottleTray 4 makes it easy to carry up to four Retap bottles with one hand. The bottles are stable in their sockets, so there’s no risk of dropping them. It’s a classy way of bringing Retap bottles to the table or to meetings at the office. It is produced at a sheltered workshop. At this workshop disabled people are given a chance to participate in society. Specifications: Weight ∆: 223 g. Length ↔ (max): 300 mm. Width ↔ (max): 173 mm. Height ↨: 17 mm. Material: beech wood
14
15
The Retap Dishwasher rack (RA44) The Retap Dishwasher rack is especially designed for cleaning Retap Bottles in an industrial dishwashing machine. The rack fits 25 bottles and lids. It makes cleaning bottles even easier. Specifications: Diameter ↔: 450 mm Height ↨: 150 mm Material: coated steel
16
17
Retap Product Development
18
19
The Retap BottleSleeve (SM37) The sleeve makes the Retap Bottle suitable for on-the-go. It protects the bottle, so you can bring your Retap bottle everywhere: in the car, in your bag, to the gym and where ever more. The sleeve fits the bottle like a tailor-made suit. It is produced eco-friendly from upcycled neoprene. This means that the left-over material from wetsuit production is not wasted, but used for the Retap BottleSleeve. Specifications: Material: upcycled neoprene Expected availability: First quarter 2012
20
21
The Retap Bottle 0.8 (BLRP11) The biggest bottle in our collection will be the Retap Bottle 0.8. Just as the Retap bottle 0.5, this bottle is also made to last: produced from strong, high quality glass and easy to clean in the dishwasher. The size of the opening is the same as with the smaller Retap bottles, so the lid fits on every Retap bottle. •
Extra strong glass
•
Dishwasher safe
•
Reusable
Specifications: Height ↨: 230 mm. Diameter ↔ (max): 90 mm. Material: borosilicate glass (20% recycled) Expected availability: Second quarter 2012
22
23
The Retap Bottle 0.3 (BSRP36) To complete the family of Retap bottles, we will present the Retap bottle 0.3. For all of you who feel like the Retap Bottle 0.5 is just a bit too big. Easier to fit in small spaces like a handbag for example. In offices with a water cooler, a smaller bottle may also be more convenient. You can finish your Retap Bottle 0.3 faster, so you can refill it with cold water again. •
Extra strong glass
•
Dishwasher safe
•
Reusable
Specifications: Height ↨: 155 mm. Diameter ↔ (max): 68 mm. Material: borosilicate glass (20% recycled) Expected availability: Second quarter 2012
24
25
Options
26
27
Packaging
Double-bottle box (XDB22) The double-bottle box fits two Retap Bottles 0.5 and two lids. There’s also enough space for some additional printed info. This box is very appropriate for shipping two bottles and still presenting the bottles in an appealing way.
We provide suitable packaging for our products. Of course we take into account that it has to be a sustainable solution, so there’s no excessive use of materials and we only work with cardboard.
Specifications:
The Retap bottles 0.5 come standard in a box of 28 bottles. We have three different other options for additional packaging.
Height ↨: 88 mm Length ↔ (max): 264 mm Width ↔ (max): 226 mm Material: cardboard
Single-bottle box
GiftTube (GM40)
(XSB29) The single-bottle box fits one Retap Bottle 0.5 and a lid. There’s enough space for additional printed info. This box is very appropriate for shipping a bottle and still has an attractive presentation.
The GiftTube is a stylish gift package for the Retap Bottle and is very suitable for display in shops. It holds one Retap Bottle 0.5 with lid.
Specifications:
Height ↨: 225 mm. Diameter ↔: 84 mm. Material: cardboard
Specifications:
Height ↨: 88 mm. Length ↔: 235 mm. Width ↔: 127 mm. Material: cardboard
28
Expected availability: Second quarter 2012
29
Printing Printing Retap Bottles
Printing boxes (BCP06)
(XCP41)
You can have your own design (like a logo or a message) on the bottle, which makes the Retap bottle a great promotional gift.
We can print custom designs (like a logo or a message) on the box. Standard printing option is on the top or front of the box.
Standard printing option is in one colour or ‘frosted’, which looks like it’s lasered and feels rougher. Optional printing is up to four colours. The printable area is displayed in blue in the picture on the left. It goes almost all the way around the bottle with a gap of 2 cm.
Colour: Standard: one colour of choice Optional: up to four colours Requirements:
Colour:
Minimum order quantity: 1000 boxes File for print: EPS or other vector-based file
Standard: one colour of choice or ‘frosted’ Optional: up to four colours Printable area: 215 mm. x 30 mm. Requirements: Minimum order quantity: 56 bottles Order size: multiples of 28 bottles File for print: EPS or other vector-based file
Blue = printable area
30
Blue = printable area
31
Printing GiftTubes
Printing BottleTrays (GCP42)
(TCP43)
The GiftTubes can be printed completely, including the top and the bottom. We are able to print in one colour or up to four colours, but also in full colour.
The BottleTrays can be lasered with a custom design. This gives the BottleTrays an even more exclusive appearance. Printable area:
Printing the GiftTubes is a very customized process, but we’ll be happy to help in creating your own design.
BottleTray 4 (max): 110 mm. x 65 mm. (approx.) BottleTray 6 (max): 150 mm. x 40 mm. (approx.)
Printable area:
Requirements:
278 mm. x 225 mm.
Minimum order quantity: 100 bottles File for print: EPS or other vector-based file
Requirements: Minimum order quantity: 56 bottles (one colour) File for print: EPS or other vector-based file
Blue = printable area Blue = printable area
32
33
34
35
Retap ApS Mail: info@retap.dk Tel.: +45 77 34 07 65 Web: www.retap.dk