S MECHANICAL A ENGINEER April 2019
Publication of the SA Institution of Mechanical Engineering, incorporating News of Associate Organisations
AN UNDERCOVER INVESTIGATOR: WORTH HIS WEIGHT IN GOLD DON’T UNDERESTIMATE THE CULTURAL ASPECT OF 4.0
Your boutique business destination Surrounded by lush gardens in the hub of Johannesburg’s northern suburbs, The Peartree in Craighall Park caters for groups of fifteen through to 100 guests in three well-appointed and equipped business suites. Breakfast meetings, working lunches, indoor or outdoor dining, half-day and full-day packages including all welcome refreshments, teas and lunches are offered in Standard, Gold and Platinum packages. Secure parking, Wi-fi, lockable space, all underpinned by highly qualified and helpful staff dedicated to ensuring your event is a success, make The Peartree a destination of choice.
www.thepeartree.co.za e-mail: info@thepeartree.co.za Tel: 011 781 1401 41 St. Albans Ave, Craighall Park
2
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
AN ENGINEER’S VIEW
Load Shedding and School Holidays
I
t’s school holidays and my children are at home. And they are bored. I suppose every generation stares in awe at their children who cannot see or comprehend the privileges they enjoy. I may as well “own” their boredom since I have through much grace and hard work, been able to put them exactly in this position. I’d like to come back to that analogy in a minute. With the recent bout of load shedding – despite any previous events, I was again caught off guard. No torches (with batteries) nor a generator. At least we have a gas stove, but we struggled to find the igniter. You may have a similar story. There is a connection between my children who are bored despite having broadband internet, Lego etc, and my unprepared state for load shedding. That is of course: privilege. Not the politically loaded “privilege,” but the fact that engineers are working and succeeding (to a degree) to keep the power on. The privilege is being oblivious to the facts – being able to go about your business without having to worry about that as well.
End of innocence
While it is unclear where South Africa’s infrastructure is heading, this may be our childhood end. We are all aware of the fact that things are not as steady as we once believed. There is a lighter counterpoint in that engineers may just have gotten their “We told you so!” moment. Engineering, maintenance and the related procurement systems are now in the spotlight. We can be of critical value if we are able to put forward informed alternatives and opinions.
Gideon van den Berg
The catch is that apart from your MSAIMechE neighbours and relatives who will take your advice on quotes for solar panels, geysers, generators with automatic changeover switches etc, your activism will not take you very far. You will need a platform and leverage for your campaign.
Actually, you already have those things at your disposal – your local SAIMechE Committee! Through your committee, it is really just two steps to pretty much anyone within ECSA or any other VA or collection of VAs.
Make sure that you are informed – and then be very opinionated! And go make some waves at your local branch Politics and the public can be influenced, if we manage ourselves as a trusted source of guidance and information. That is exactly what we were trained to do, but I don’t think we are stepping up to the plate like we should. The take-away is this: make sure that you are informed – and then be very opinionated! And go make some waves at your local branch. Gideon van den Berg MSAIMechE Pr. Eng
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
3
Invincible Valves (Pty) Ltd was established in 1982 and since has grown to a medium sized enterprise located in Knights, Germiston Invincible Valves prides itself on service excellent and flexibility by striving to enhance our customer’s bottom line. Our 6,500m² facility in Knights is made up of 4,500m² under roof being our stores and workshop. The facility is fully equipped to offer a one-stop resource for valves and ancillary equipment which we transport globally. As an approved BBBEE Level 4 supplier to all major industries within South Africa, we maintain expertise and experience across a broad spectrum of industries and applications with a wide range of products. We offer a comprehensive range of local and imported valves and accessories for the mining, petro-chemical, power generation, water, sewerage and general industries. We have agents in all major centres around the country and service all four corners of the globe. We offer an in-house rubber lining service for valves, pipes, fittings and vessels which is utilized by many of the country’s major valve manufacturers. In addition we offer complete service, repair and valve reconditioning services for all types of valves. Our Core Values: We believe in treating our customers with respect. We grow through creativity, invention and innovation. We integrate honesty, integrity and business ethics into all aspects of our business functioning. Our Mission Statement: Build long term relationships with our customers and clients, to provide exceptional customer services by pursuing business through innovation and advanced technology. Our Purpose: To be a leader in the Valve Industry by providing enhanced services, customer service and profitability. Our Vision: To provide a quality service that exceeds the expectations of our esteemed customers. Invincible Valves is a proud supplier of quality valve products and ancillary equipment backed by service excellence around the globe. It is the combination of these values that allows us to form lasting business relationships.
Invincible Valves (Pty) Ltd
If it's not INVAL®, it's not Invincible 33 Shaft Road, Knights, Germiston TEL: +27 (0) 11 822 1777 | FAX: +27 (0) 11 822 3666 EMAIL: enquiries@invalve.co.za | WEB: www.invalve.co.za
S MECHANICAL A ENGINEER March 2019
Publication of the SA Institution of Mechanical Engineering, incorporating News of Associate Organisations
S MECHANICAL A ENGINEER April 2019
VOLUME 71
Contents AN UNDERCOVER INVESTIGATOR: WORTH HIS WEIGHT IN GOLD DON’T UNDERESTIMATE THE CULTURAL ASPECT OF 4.0
On the Cover
KSB Pumps and Valves Tel: (011) 876-5600 Email: Annett.Kriel@ksb.com www.ksbpumps.co.za
Production
Technology
7
18 The Digital Culture Challenge
Digital Inclination Measurement
Cover Story
Up and Coming
8
22 Engineers Get a Boost
Optimal Performance
Training
Environment 11 Using Biomass Fuels for Power
Labour Management
27 Engineering Community Passes 750 000 Members
Logistics
13 The Undercover Investigator
29 Truck Sales Rocket
Conferencing 14 Building Sustainability Through Local Manufacturing
Maintenance and Servicing 16 High Temperature Servicing with Air Cannons
3
An Engineer’s View
7
Institution News
31 Market Forum 38 On the Move
Copyright
All rights reserved. No editorial matter published in “SA Mechanical Engineer” may be reproduced in any form or language without written permission of the publishers. While every effort is made to ensure accurate reproduction, the editor, authors, publishers and their employees or agents shall not be responsible or in any way liable for any errors, omissions or inaccuracies in the publication, whether arising from negligence or otherwise or for any consequences arising therefrom. The inclusion or exclusion of any product does not mean that the publisher or editorial board advocates or rejects its use either generally or in any particular field or fields.
Produced by: PROMECH PUBLISHING, P O Box 373, Pinegowrie, 2123, Republic of South Africa Tel: (011) 781-1401, Fax: (011) 781-1403 Email: samecheng@promech.co.za, www.promech.co.za Managing Editor Susan Custers Editorial Contributors Liesl Venter/Patricia Holburn Advertising Sales: Louise Cresswell Cell: 071 886 1263 DTP: Sanette Badenhorst Circulation: Netta Janse van Rensburg Subscriptions Please email us at accounts@promech.co.za if you wish to subscribe to “SA Mechanical Engineer” at R550,00 (excl postage and VAT) per year; R1 380,00 per year for Africa/ Overseas. Disclaimer
Official Publication of THE SA INSTITUTION OF MECHANICAL ENGINEERING and endorsed by:
PROMECH Publishing and The South African Institution of Mechanical Engineering as well as any other body do not take responsibility for the opinions expressed by individuals.
Printed by: Typo Colour Printing, Tel: (011) 402-3468/9 FSC (Forestry Stewardship Accreditation)
CONSULTING ENGINEERS OF SA CORROSION INSTITUTE OF SA INSTITUTE FOR CERTIFICATED MECHANICAL AND ELECTRICAL ENGINEERS NATIONAL SOCIETY OF BLACK ENGINEERS NUCLEAR INSTITUTE SA ASSOCIATION FOR ENERGY EFFICIENCY SA CAPITAL EQUIPMENT EXPORT COUNCIL SA INSTITUTE FOR NON-DESTRUCTIVE TESTING SA INSTITUTE OF TRIBOLOGY SA PLASTIC PIPE MANUFACTURERS ASSOCIATION SA PUMP MANUFACTURERS ASSOCIATION SA VALVE AND ACTUATORS MANUFACTURERS ASSOCIATION VALVE & ACTUATOR MANUFACTURERS CLUSTER OF South Africa
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
5
SA INSTITUTION OF MECHANICAL ENGINEERING
Council 2018 - 2020
Company Affiliates
Office Bearers
President.....................................................Prof D Blaine (Debby) Vice President ...................................... H Makwarela (Hangwani) National Treasurer............................Prof JL van Niekerk (Wikus)
Branch Chairpersons
Central .............................................................. A Celliers (Alicia) Eastern Cape .......................................... G van den Berg (Gideon) KwaZulu-Natal ....................................... Dr J Padayachee (Jared) Mpumalanga Highveld ....................................N Lecordier (Noel) Vaal ............................................................. N Swanepoel (Niekie) Western Cape .............................................. Dr M Venter (Martin)
Portfolios:
Procedures ......................................................... SZ Hrabar (Steve) Communications and Marketing .................G Bartholomew (Bart) TBC...........................................................MAE Black (Malcolm) TBC..............................................................HG Bosman (Tertius) TBC.................................................C Molomo-Mphephu (Cillia) TBC..............................................................R Tshitahe (Rudzani) Chief Executive Officer..................... Vaughan Rimbault National Office Manager................ Anisa Nanabhay National Office Co-ordinator…….....………….. Carey Evans PO Box 511, Bruma, 2026 Tel: (011) 615-5660 Email: info@saimeche.org.za Website: www.saimeche.org.za Membership Email: membership@saimeche.org.za
6
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
Amoricom
Megchem
Autodesk as represented by Worldsview Technologies
Mod-U-Flow CC
Alstom Power Service SA (Pty) Ltd Babcock Ntuthuko Engineering Pty Ltd Bosch Projects Pty Ltd Eskom Rotek Industries SOC Ltd Esteq Group (Pty) Ltd Exxaro Resources (Pty) Ltd Festo (Pty) Ltd Fluor SA (Pty) Ltd Kelvion Systems (Pty) Ltd Green Plan Consultants (Pty) Ltd Hatch Africa (Pty) Ltd Howden Power (a div of Howden Africa) Howden Projects (a div of James Howden) MBE Minerals (SA) (Pty) Ltd
April 2019
Osborn Engineered Products SA (Pty) Ltd Plant Design & Project Services (Pty) Limited (PDPS) PPS Insurance Co Limited Proconics Redheads Engineering Services (Pty Ltd) S.A.M.E Water (Pty) Ltd SA Power Services (Pty) Ltd Sasol Technology (Pty) Ltd Siemens (Pty) Ltd Simera Technology (Pty) Ltd Spirax Sarco (Pty) Ltd Tenova Mining and Minerals SA Thyssenkrupp Engineering (Pty) Ltd Vital Engineering (Pty) Ltd Weir Minerals Africa
PRODUCTION
Digital Inclination Measurement The latest digital protractors not only measure degrees of incline, whether or not a particular surface is level, but also its precise degree. “What this means is that a particular degree can be preset, and the surface levelled precisely in accordance with the measurements,” says Upat National Product Specialist, Charl Weber.
T
he main difference between the Tech 500 DP and the Tech 1000 DP models is that the Tech 500 DP measures from 0° to 90° and 90° to 0°, while the Tech 1000 DP covers 360°. The former reveals what is out of sync, while the latter calculates the exact amount.
Upat National Product Specialist, Charl Weber
In addition, the latter features smart data transmission to peripheral devices, featuring a RS-485 interface with a Modbus documentation protocol and Stabila Analytics software for analysis. It includes a USB data cable with an M12 connector and a four-pin data cable with M12 connectors.
This makes the Tech 1000 DP particularly well-suited to the automotive industry, where for example, it can be used to align radar systems on new motor vehicles. Upat has already secured a few pre-orders from major automotive manufacturers, Charl reveals.
Applications
The latest digital protractors from Stabila make for easy measurement and alignment tasks in a broad range of applications. The Tech 500 DP is ideal for production applications such as carrying out maintenance on or setting machines. Long-term measurements are also possible thanks to a range of mounting options. These include a T-groove and a V-groove, plus an integrated rare earth magnet. The Tech 500 DP can also measure key values in quality assurance, while it allows for easy alignment of systems during the commissioning of special-purpose mechanical engineering tasks.
Long-term measurements mean that position changes can be recorded when commissioning a machine, while the actual values measured can be captured in a detailed transfer report The Tech 1000 DP extends the functionality of Stabila’s digital protractor technology by allowing for the modernisation and digitisation of existing machines in production. Advanced features include measuring, recording and documenting key values for quality assurance purposes; as when carrying out maintenance, setting machines, and monitoring processes. Long-term measurements mean that position changes can be recorded when commissioning a machine, while the actual values measured can be captured in a detailed transfer report.
Accuracy
A digital display screen allows for optimum readability under all conditions, while the anodised aluminium measuring surfaces themselves are particularly hardy. These digital protractors are water- and dust-proof in accordance with protection class IP65. A variable power supply includes the option of an integrated lithium-ion battery. “Precision measurement is fundamental to a range of production work. Hence it is vital that professionals are able to rely completely on the accuracy of their measuring tools. This calls for measurement technology that is robust, always accurate and easy-to-use,” Charl concludes.
The Stabila TECH 1000 DP features smart data transmission, with a RS-485 interface
Upat, Alison Thomet, Phone: (011) 624 6700 Cell: 082 452 3437, Email: alison.thomet@upat.co.za Web: www.upat.co.za
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
7
COVER STORY
OPTIMAL PERFORMANCE KSB Pumps and Valves is intensifying its focus on its aftermarket service that adds value to customer operations beyond the supply and maintenance of its own products.
KSB Pumps and Valves SupremeServ division manager, Grant Glennistor
I
n future it will extend its services and engineering expertise to include the maintenance of entire systems, reverse engineering of rotating equipment and system optimisations. This includes maintenance of third-party peripheral equipment in order to ensure its clients’ systems perform optimally at all times. “Our aftermarket engineering teams can also re-
All aftermarket services fall under the new KSB SupremeServ banner which encompasses existing and new maintenance manufacture or reverse engineer equipment that is no longer available but necessary to meet client’s requirements,” says KSB Pumps and Valves SupremeServ division manager, Grant Glennistor.
Supreme service
He continues by saying that all aftermarket services fall under the new KSB SupremeServ banner which encompasses existing and new maintenance, logistics and engineering infrastructure and is entirely focused on elevating customer assistance to new heights within the pump industry. “SupremeServ is a safety net that ensures KSB’s South African and global infrastructure and expertise is available to support customers’ fluid transfer projects, including equipment and related infrastructure to ensure its long-term success. “It includes a faster supply chain with a move towards fully automated logistics functions for faster spare parts turnarounds, upgraded high-tech service centres at all KSB branches, specialised repair services on all makes of pumps and related equipment, specialised welding, as well as installations, commissioning, performance testing on site, decommissioning and other field service and engineering services,” adds Grant.
World-class
Local pump users are in good hands when they deal with the company which has a history spanning more than 60 years in South Africa. The local operation also ranks as one of the top service centres within the KSB World of 16 000 employees in more than 60 countries.
8
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
Its resident engineers are regarded as among the best undertaking all kinds of projects in the remediation and repairs of equipment in projects as diverse as power generation plants, petrochemical, bulk water supply projects, as well as being equally eager to assist small-scale industrial and agricultural projects. This ensures KSB SupremeServ services are available for the widest possible range of clients whether for basic or large-scale services.
A new lease on life
The company has ongoing programmes to continuously improve services through constant upskilling and development of its staff Simultaneously, the company has ongoing programmes to continuously improve services through constant upskilling and development of its staff in line with market requirements. This level of commitment has also led to the company qualifying as a Level 1 BBBEE provider.
Well situated
KSB SupremeServ centres are situated at all local branches with spares and standard parts available within 24 hours to service all 22 000 variants of its own pump. The centres also offer dedicated walk-in-centres for on-the-go-services. KSB Pumps and Valves Annett Kriel Tel: (011) 876-5600 Email: Annett.Kriel@ksb.com www.ksbpumps.co.za
Retrofitting is an excellent alternative to buying a new product and can be performed on pumps regardless of their intended use. KSB Pumps and Valves is leading the way with its range of services that assist users in getting the most out of their pumps when pumping requirements change or to prolong the life of existing pumps. According to the company’s regional sales manager for Sub-Saharan Africa, David Jones, retrofitting is equally suitable for industrial, water supply and waste water disposal applications as well as for the power supply industry.
Changing requirements
“Changed circumstances often require a new approach. This also applies to pumps which are used in fluid transfer systems where increased energy efficiency is required to meet new legal requirements, as this does not always necessitate a new pump. “The areas of use for retrofit solutions are as diverse as the requirements to be met by the pump systems in question. As a result, retrofit solutions go together with hydraulic and mechanical modifications as well as with changes to the materials. “There are a number of benefits that can be applied to lower maintenance costs, reduce power consumption, achieve longer service life, increase system availability or even to comply with legal requirements,” says David.
Solving premature wear
In others, retrofits because of changing materials or chemicals can solve premature wear or chemical corrosion, while pumps in power stations may be critical and require retrofits to prolong their lives without the need to manufacture purpose-built pumps with potentially long lead times. With expertise to retrofit almost any pump, specify, manufacture and optimise designs, materials, impellers, diffusers etc, and carry-out hydraulic performance tests, it makes sense to consider retrofitting rather than replacing pumps.
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
9
The Local Manufacturing Expo Aims to:
21 – 23 MAY 2019
Promote local manufacturing
EXPO CENTRE, NASREC,
Demonstrate Southern Africa’s export potential
JOHANNESBURG, SOUTH AFRICA
Provide access to global markets
A Showcase of Southern Africa’s Manufacturing Capabilities Who Will Exhibit?
Networking opportunities Develop public / private partnerships Public / private sector collaborations Identify industry challenges and opportunities for growth
Manufacturers across a variety of sectors, including:
Agriprocessing
Automotive
Business Process Outsourcing
Capital Equipment
Chemicals
Construction
Engineering
Food and Beverage
Furniture
ICT and Electronics
Metals
Mining
Plastics
Textiles/ Clothing/ Footwear
Transport
www.localmanufacturingexpo.co.za In association with:
10
Endorsed by:
THE SOUTH AFRICAN MECHANICAL ENGINEER
Implemented by:
VOL 71
Brought to you by:
April 2019
ENVIRONMENT
Using Biomass Fuels For Power John Thompson has developed and introduced the Torripac, a biomass-fired package boiler.
A
hybrid boiler containing some watertube boiler features and a range of enhanced package boiler features, the Torripac has significant advantages over other biomassfired package boilers on offer. Such advantages include a modular design, the ability to handle a range of biomass fuels, an enhanced thermal efficiency and the ability to generate power through high pressure steam. “The development of the Torripac was driven by the increasing demand from our customers to use biomass to generate thermal energy, either by using their own process’s biomass by-product or through purchased biomass in order to reduce their carbon footprint,” says Simon Boiskin, John Thompson’s Export Sales Manager for Package Boilers.
Great foul fuel handler
A variety of fuels can be fed into the boiler through
its box-ram feeding system, while the vibrating grate combustion system is proven to handle fouling fuels better than traditional methods. In addition, the watertube furnace incorporated in the Torripac is designed to have a low exit combustion gas temperature which further reduces the risk of fouling. A packaged heat recovery tower which includes a two or three pass tubular air-heater, in combination with an economiser enhances the thermal efficiency of the unit.
Reusing gases
“The air-heater and economiser extract heat from the combustion gas that would otherwise have exited the chimney unused. This heat is used in the air-heater to preheat the combustion air and in the economiser to preheat the feedwater. The air-heater preheats the combustion air to dry and combust fuels with up to 50 % moisture,” explains Etienne de Villiers, John Thompson’s Divisional Technical Manager. The Torripac’s high operating pressure of 29 bar versus the industry standard of 10 bar allows the option of generating electrical power in conjunction with process steam. Power can be generated by passing the high pressure steam through a back pressure power generating unit such as a steam turbine or a screw expander unit. In this way electricity is generated by the high pressure steam while steam is reduced to the customer’s required process pressure.
or
wth
Etienne de Villiers, Tel: (021) 959-8400 info@johnthompson.co.za, www.johnthompson.co.za
CAD illustrations of the versatile new biomass-fired package boiler
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
11
South Africa’s perfect blend of ingredients provides the ideal backdrop for this international Congress: adventure, wildlife, magnificent scenery, rich cultural diversity, and efficient infrastructure. Few countries in the world can match the fun, beauty and excitement you will find in South Africa. At the foot of the vast continent of Africa is Cape Town, host city of the FIATA World Congress 2019, also known as South Africa’s “Mother City”. Cape Town is set in a dramatic landscape of exquisite natural beauty, nestled between the majestic Table Mountain and the sea, and is widely regarded as one of the most beautiful cities in the world.
START PLANNING YOUR TRIP NOW TO MAKE THE MOST OF THIS OUTSTANDING DESTINATION!
AFRICA’S LEADING EVENT DESTINATION
AFRICA’S LEADING CITY DESTINATION
AFRICA’S LEADING AIRPORT DESTINATION
2018 WOR LD TRAVEL AWARDS
GOLF DESTINATION OF THE YEAR
(AFRICA & GULF STATES)
2017
•
2017 2018
2017
WORLD TRAVEL AWARDS
WORLD TRAVEL AWARDS
I NTERNAT I O N A L ASSOC I AT I O N OF GO L F T O UR OPER AT O RS
REGISTER NOW: EARLY SPECIALS www.fiata2019.org
FIATA SAFARI
PRE-CONGRESS GOLF AT STEENBERG
You are coming to Africa! This is your chance to experience a unique once-in-alifetime Big Five Safari. Track these wild wild animals, live in luxury, dine under the starry Southern skies and immerse yourself in Africa. To book email: info@africabespoke.com
Consistently named one of the best conditioned courses in South Africa Golf Digest Annual Top 100 – playing at Steenberg Golf Estate should be on every serious golfers’ bucket list. The golf package includes green fees, transport, meals and drinks. Signup for the tournament when you register for the Congress.
DAY TOURS It’s not all hard work and no play! A varied selection of day tours in and around Cape Town is available for participants and partners who find that they have a free moment during the Congress week. To book visit: www.kingdomtt.co.za/ fiata-2019/
FOR REGISTRATION ENQUIRIES CONTACT:
12 THE SOUTH AFRICAN MECHANICAL ENGINEER register@fi ata2019.org
VOL 71
April 2019
EARLY ACCOMMODATION SPECIAL Choose from among some of Cape Town’s most convenient Congress hotels, with prices and star-ratings to suit all budgets. Participants that book and pay in full before 30 April 2019 will benefit from special discounted accommodation rates.
ELECTRA MINING 2018
LABOUR MANAGEMENT FABRICATION
The Undercover Investigator Many businesses focus their loss control strategies on preventing unwanted elements from getting in from the outside. While this is certainly an important step in securing assets and minimising risk, what if the truly dangerous element has already made itself comfortable within the operations of the organisation?
I
n financial management, internal audits play an integral role in ensuring the financial stability and integrity of the organisation. Similarly, savvy businesses should expose themselves to an internal auditor of a different kind – the undercover investigator.
Businesses should expose themselves to an internal auditor of a different kind – the undercover investigator “If conducted correctly, these investigations become the cornerstone of the loss control portfolio,” advises Kyle Condon, Managing Director of D&K Management Consultants. “The successful deployment of well-trained and experienced undercover agents is the single most effective company security tactic.”
Manage risk from inside out
To Kyle, the undercover investigator serves to manage risk from the inside out, in a consistent manner. “The innermost workings of the business can be seen as the core of an onion. While the outer layers of security prevent threats from getting in, the investigator placed at the centre of the operations ensures that those already at the core are not putting the business at risk.” Undercover investigators are not only useful for theft or loss investigations but also offer Kyle Condon
valuable insights as deployed auditors. “Undercover investigation services are a fantastic way to identify weaknesses in company policies and operating procedures. If these policies are not ‘audited’, chances are that you may not ever know where the real issues lie. With a consistent presence, the investigator continues to protect the business in real-time, rather than reviewing what went wrong after the fact. This creates a proactive loss control strategy,” he adds. In addition to risk mitigation, undercover investigations offer various advantages. From the development of accurate security budgets and strategies (including elements such as cameras, manpower, policies and procedures, employment processes etc), to the identification of wasted resources, or unethical employees. Having an agent on its payroll gives the business access to essential security and operational information. Undercover investigation services should be introduced into the client’s workforce. Investigators are deployed as everyday workers or contractors, as would be the case for clients’ routine recruiting procedures. Within a short space of time, the right investigator would have integrated him/ herself among the rest of the employees.
Undercover investigator tips
Kyle provides four key tips for ensuring the undercover investigator remains impartial and effective: “Rotate the investigator every six months. Place them in different sectors or departments to get a full view of the business’ operations. Place them strategically to combat crime, taking the guessing out of the game. Use the intel they provide to assist in creating accurate and impactful policies and procedures.” While the undercover investigation services are in progress, information is passed on to the client directly. This should happen on a weekly basis. “The weekly reports enable the investigation firm to formulate graphs and provide analytics that will clearly show trends and patterns of the various associated risks,” concludes Kyle. D&K Management Consultants, Kyle Condon Tel: (011) 824 0334, Email: saint@intrigue.co.za Web: www.investigators.co.za.
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
13
CONFERENCING
Building Sustainability Through Local Manufacturing There is enormous potential for Southern African manufacturers to increase their market share both locally and internationally. The driving force behind capturing this growth opportunity is the South African Capital Equipment Export Council (SACEEC).
A
ccording to Eric Bruggeman, CEO at SACEEC, part of the Council’s mandate is to organise outward selling and inward buying missions. “We identified a need to showcase the offerings of the SADC region’s local manufacturers in an interactive manner. The result is the inaugural Local Southern African Manufacturing Expo (LME) being held at the Expo Centre, Nasrec from 21 to 23 May 2019,” he says. Eric Bruggeman, CEO of SACEEC
Grow a customer base
“It is critical for the sustainability of local manufacturing operations that they aggressively pursue opportunities to increase their market share. Not only is this relevant to their increased permeation
of the overseas market, but furthermore, they need to capture market share that is currently being monopolised by importers. Recent statistics indicate that South Africa currently imports products to the value of a staggering $83.2-billion. If we were able to shift this demand to the local manufacturing sector, we could realistically create 1.329-million jobs,” adds Eric.
Recent statistics indicate that South Africa currently imports products to the value of a staggering $83.2-billion “We believe that the exhibition will enable exhibitors to meet with top decision makers from the inward buying missions already committed to the event. “As Industry 4.0 continues to transform the way that manufacturers do business, LME 2019 will provide them with an opportunity to grow their customer base, with the knock-on potential for fostering job creation,” says Charlene Hefer, portfolio director for Specialised Exhibitions Montgomery. “We are excited about the prospect that local manu-
RELIABLE PRODUCTS & SOLUTIONS for the entire industry.
Motor Control Centres, Panels & Distribution Boards
Overhead Lines
Standby/Emergency Generator Sets Motor Protective LV Switchgear
Electrical Construction
Direct Online Starters (DOL)
Motor Scan Power & Distribution Transformers LV Motors, Drives, Softstarters & Switchgear MV Drives, Softstarters and Switchgear
Steam Turbo Generation Set Solutions
MV Motors
Invicta Vibrator Motors Mini Substations
Zest WEG Group is able to offer a range of standard off-the-shelf products as well as end-to-end energy solutions by leveraging best practice engineering and manufacturing capabilities. All products are engineered to facilitate a safe and reliable environment with operational stability and the highest possible production levels as an objective. Reduced maintenance and ease of serviceability assist in lowering the total cost of ownership.
14ZWG_general_130mmx180mm.indd THE SOUTH AFRICAN MECHANICAL ENGINEER 1
VOL 71
Tel: 0861 009378
April 2019
www.zestweg.com
2018/12/04 10:28
facturing operations have to evolve and expand by interacting with the inward buying mission representatives. Added to this are the benefits derived by the support of SACEEC, together with AREI (Association of Representatives for the Electronics Industry) and the dti (Department of Trade & Industry). We urge local manufacturing companies throughout Southern Africa to capitalise on the
Supply chain workshops
Running alongside this year’s LME conference is the Southern African Institute of Mining and Metallurgy (SAIMM) Supply Chain conference and strategy workshop.
unique marketing opportunities of exhibiting at LME 2019,” says Charlene. Specialised Exhibitions Natasha Heiberg Tel: (010) 003-3083 Email: info@localmanufacturing.co.za www.localmanufacturingexpo.co.za
complement to the Local Southern African Manufacturing Expo and we believe that the content will have great impact on the local sector,” says Charlene Hefer, portfolio director for Specialised Exhibitions Montgomery.
The conference Premium sponsor is the Mandela Mining Precinct (MMP) and partners include Mining Equipment Manufacturers of South Africa (MEMSA) and the South African Mineral Processing Cluster (SAMPEC).
Strategies to build the local mining supply chain and the potential role of a South African mining services cluster
Creating awareness
Conference attendees can look forward to sessions on the SA mining supply chain in terms of strengths, weaknesses, opportunities and threats, the implications of the Mining Charter 3 for the SA supply chain, successful supplier development case studies, measuring and maximising local content, standardised codes and export finance.
The conference and workshop is aimed at creating awareness of new supply chain requirements as per the Mining Charter 3, and how capacity and capability in South Africa can be activated to meet these requirements. “Attendees will be provided with an insight into the roles and objectives of the MMP, MEMSA and SAMPEC, and the assistance they can provide. The conference and workshop are the perfect
New mining charter implications
The programme for the workshop on 23 May addresses strategies to build the local mining supply chain and the potential role of a South African mining services cluster.
26 Nagington Road, Wadeville, Germiston 1400, South Africa Tel +27 11 824 4810 / Fax +27 11 824 2770 E-mail info@apepumps.co.za / info@matherandplatt.com Website www.apepumps.co.za / www.matherandplatt.com
Split Case Pump • Sugar and Paper Mills • Refineries • Petro Chemical
Vertical Turbine • Cooling Water • Circulation • Irrigation
Horizontal Multistage Pump • Power Generation Plants • Cooling and Heating Systems • Mining Applications
Locally Manufactured
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
15
MAINTENANCE AND SERVICING
High Temperature Servicing With Air Cannons Martin Engineering has announced a new technology for installing air cannons without a processing shutdown. The system allows technicians to mount the units on furnaces, preheaters, clinker coolers and in other high-temperature locations while production continues.
cannons themselves. With all installation and service performed from outside the vessel or process, the system also contributes to a safer workplace by minimising the difficulty and hazards of installation and maintenance.
T
he company developed the Martin Core Gate to reduce expensive downtime associated with traditional installation methods, which require that high-heat processes be halted to allow core drilling and mounting of the cannons. The new system has been paired successfully with the firm’s Smart Nozzle Series, a family of air cannon nozzle designs which can be serviced or replaced during production, without removing the
In the past, when material accumulation problems became an issue, processors would have to either limp along until the next scheduled shutdown or endure expensive downtime to install an air cannon network
Saving money
“In the past, when material accumulation problems became an issue, processors would have to either limp along until the next scheduled shutdown or endure expensive downtime to install an air cannon network, costing hundreds of thousands in lost production,” says Global Flow Aids Manager, Brad Pronschinske “Our initial advancement was engineering a nozzle design that could be safely replaced with no production stoppage,” Brad continues. “Now this technology allows us to add air cannons and nozzles to an operation while it’s in full swing, without disrupting the process.” To install air cannons in a running process, Martin technicians first conduct a thorough assessment of the accumulation patterns and blockages to identify
Air cannons can be installed and serviced without a process shutdown
16
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
The drill cuts through outer wall and refractory, then retracts automatically
the proper air cannon locations, then drill through the outer wall and weld the Core Gate in place. The core drill is mounted, checked for alignment and started, with progress monitored from a safe distance as it works its way through the refractory. As soon as the drill cuts through the refractory, the drill is backed out and an isolation shield is slid into place to protect workers from the severe environment. The Smart Nozzle assembly is mounted next, using an 8-bolt pattern that delivers excellent support, followed by the nozzle itself.
Our initial advancement was engineering a nozzle design that could be safely replaced with no production stoppage Leaving the refractory intact
Replacing a conventional fan nozzle on existing equipment typically requires the removal of refractory material from around the nozzle opening, usually with a pneumatic hammer from inside the vessel. The process invariably weakens the surrounding refractory and renders it more susceptible to spiderwebbing and subsequent cracking. In contrast, the Martin replacement system leaves the refractory undisturbed during service, and one worker can safely perform installations or maintenance from outside the vessel. Martin Engineering Brad Pronschinske Tel: (013) 656_5135 Email: feedback@martin-eng.com www.martin-eng.com.za The core drill is mounted and aligned
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
17
TECHNOLOGY
The Digital Culture Challenge When it comes to digital transformation, people matter every bit as much as technology, says Victoria van Camp, CTO and president of innovation and business development at SKF
R
egardless of their sector, size or history, companies are recognising that the recent improvements in connectivity, control and analytical capabilities have the potential to unlock improvements in the cost, quality and productivity of their operations. More fundamentally, digital technology is enabling entirely new product and service offerings and underpinning the creation of new business models.
“You don’t have to look far to see this process in action. SKF has been designing and making bearOur engineers couldn’t ings and seals for more create new products than a century. Today however, or solve customer problems we are a without our portfolio of advanced
design optimisation and simulation tools
18
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
digital business too,” says Victoria. “Our engineers couldn’t create new products or solve customer problems without our portfolio of advanced design optimisation and simulation tools. We have made significant investments in flexible, automated manufacturing sites and connected logistics networks, too. “Yet despite all the progress made so far, few organisations can claim to have mastered the digitalization challenge. The gap between the potential application of digital technologies and what most companies have integrated into their everyday operations remains wide.” If the rewards of the digital revolution are so significant, what is holding companies back? Technology is certainly part of the story. Some digital approaches have not yet reached the level of maturity required for large scale use.
Tech adoption more cultural
But there is also something else at play, there are plenty of technologies that are mature, robust and inexpensive capable of being applied far more widely than they are today. This suggests that barriers to adoption are not technical, but cultural. There’s plenty of evidence to support that hypothesis. When consultancy Capgemini Invent surveyed more than 1700 business leaders
April 2019
last year, for example, 62 percent of them said that their own corporate culture was the biggest obstacle to digital transformation. Perhaps that shouldn’t be surprising. Moving to a digital world can be an unsettling experience. There’s the requirement to work in new ways, with new tools, for example. In some cases, staff may fear a loss of autonomy. Increased transparency also means there is nowhere to hide if things aren’t going well. Everything becomes much more transparent.
Late adopters
The bad news, according to Capgemini’s research, is that companies in the mechanical and plant engineering sectors are late adopters when it comes to the creation of a true digital culture. “The discipline of engineering strongly focuses on the technical side of its products and services,” notes Yvette Zzauer of Capgemini Invent.
Few organisations can
“ T h i s claim to have mastered the strongly imdigitalization challenge pacts the corporate culture, which tends to be a more technology than human-centered culture.” While this means engineering businesses tend to be more comfortable than other sectors about adopting technological advances, she adds, it can mean they pay insufficient attention to the human side of digitalisation. Fortunately, there are things companies can do to actively promote cultural change. In the past, corporate culture was broadly and intangibly defined by shared values, attitudes, standards and beliefs that characterise the members of an organisation and define its nature. However, digital culture is more tangible, concrete and explicit.
SKF Samantha Joubert Tel: (011) 821-3602 samantha.joubert@skf.com
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
19
TRACE Inte is a globa anti-br or leading pr party risk
TRACE due diligence solutions are based on internationally accepted best practices and our experience and familiarity with the compliance needs of multinational companies. Services range from a denied parties screening to enhanced due diligence, including TRACE Certified Due Diligence.
20
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
International, Inc. globally recognized ti-bribery business organization and g provider of third risk management solutions.
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
21
UP AND COMING
Engineers Get a Boost
and energy saving, are a shift in load and carbon emissions which differentiates us from others in the market,� says Thabang.
Last year, the SAB KickStart Boost finalists were announced, two of whom are in the mechanical engineering industry.
T
habang Mofokeng has been the director and CEO of Samac Engineering Solutions since 2013, a mechanical engineering business with a core focus on green solutions.
SAMAC Engineering Solutions has a Level 1 BBBEE status.
Giving companies the sharper edge
The second finalist Andre Williams, established AW Engineering in 2017, a business that offers mechanical engineering and sharpening services to manufacturing companies and engineering workshops and woodwork shops in Cape Town.
The business specialises in mechanical and electrical engineering designs (thermal and finite element analysis) and component fabrication.
Cooling buildings down
Samac Engineering Solutions has exclusive rights to supply Phase Change Material, a bio degradable product that cools down buildings and reduces air conditioning costs by up to 30%. This material is also used in a new product called Iceless Pour, making it possible to serve draught beer without the need for ice even in hot conditions (outdoor events) because the gel has a higher melting point. “The benefits of our products, which are green
As a SAB KickStart Boost finalist, Thabang hopes the business will gain exposure and market access, as well as supply SAB with its Iceless Pour product Andre Williams
Thabang Mofokeng
22
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
Services range from general engineering to precision engineering, sparking and wire cutting to milling and gear cutting, as well as sharpening.
Andre would like to continue improving his unique selling proposition, which is capacity, impact, credibility and cost, as well as develop a marketing strategy for the business that includes branding and web presence
Boiler and Environmental Solutions Industrial watertube boilers
Emerging tech
“My current business strategy is to understand each client’s criteria to ensure the correct and best solution is provided as well as adopting emerging technologies, which will ensure the business succeeds.”
Utility boiler plant
Short term, Andre would like to continue improving his unique selling proposition, which is capacity, impact, credibility and cost, as well as develop a marketing strategy for the business that includes branding and a web presence. This in turn, he hopes will increase the customer base. Long term goals include securing fixed client contracts through an established reputation within Cape Town that allows him to open four sharpening chain stores within the region. SAB www.sabentrepreneurship.co.za
Package firetube boilers
Air pollution control equipment
John Thompson designs, manufactures and installs fossil fuel- and biomass-fired boilers & air pollution control equipment.
John Thompson, a division of ACTOM (Pty) Ltd Tel: +27 (0)21 959 8400 | Email: sales@johnthompson.co.za www.johnthompson.co.za
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
23
TRANSFORMING FREIGHT LOGISTICS
24
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
TRANSNET FREIGHT RAIL
www.transnet.net www.transnetfreightrail-tfr.net
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
25
WORLD-CLASS performance requires speed, agility and endurance
STRATEGY
INFRASTRUCTURE
OPERATIONS
Planning strategic direction benchmarked to world-class standards
Development of world-class infrastructure from concept to realisation
Development of operations to best practice and world-class standards
Supply Chain Strategy
Facility Design & Development
Process & Operations Design
• Supply Chain network analysis & design • National & Regional DC strategy development • Facility Sizing and OPEX estimates • On-line fullllment • Slow vs. Fast movers network set-up • A Supply Chain that supports business strategy • Site development strategies • Technology, IOT and digitilisation strategy
• Greennelds site development
• Operations assessment and benchmarking • WMS / WCS review • WMS / WCS functional requirements • Process and operations optimisation • Long term operational development strategies • Process audit • Labour standards and incentive programs
planning • Brownnelds site development planning • Functional building requirements speciication • Technical liaison to professional / development team • Facility sizing requirements (short to long term) • Design to execution • Procurement, program and vendor management
In today’s competitive business world you need to focus on every opportunity to advance your company mission
26
THE SOUTH AFRICAN MECHANICAL ENGINEER
Cape Town: (021) 816 2000 | ils-ct@ils.co.za Johannesburg: VOL 71 April 2019 (011) 656 1100 | ils-jhb@ils.co.za www.ils.co.za
TRAINING
Engineering Community PASSES 750 000 Members RS Components recently announced that its DesignSpark online engineering community has grown to more than 750 000 members.
D
esignSpark was launched in 2010 to provide design engineers and students around the globe with free tools, resources and content to help them turn their ideas into reality.
Giving back to the community
“Since day one, the aim of RS has been to give
DesignSpark was launched in 2010 to provide design engineers and students around the globe with free tools
something back to the electronics industry through DesignSpark by providing free professional tools and resources for engineers around the world,” says Mike Bray, Vice President of DesignSpark. During the nine years since it launched, RS has continued to improve the functionality and range of resources available through the DesignSpark ecosystem. This has resulted in a large increase in new members, with more than 35% of DesignSpark’s current membership having joined over the past two years. Registering on DesignSpark is completely free of charge, with all members gaining instant access to DesignSpark PCB, DesignSpark Mechanical, DesignSpark Electrical, PCB Part Library, 3D Model Library, DesignSpark Toolbox App, Zerynth Studio and Obsolescence Manager. “In addition to free tools and resources, DesignSpark provides a platform for members to share their projects and opinions and connect with other engineers and students,” concludes Mike. DesignSpark Tel: (011) 691-9300 Email: sales.za@rs-components.com www.za.rs-online.com
s n t
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
27
28
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
LOGISTICS
Truck Sales Rocket The South African commercial vehicle market got off to a flying start this year, showing a 7.3% increase to 1 653 sales.
T
his is according to the latest results released for January 2019 by the National Association of Automobile Manufacturers of South Africa (Naamsa), Associated Motor Holdings (AMH) and Amalgamated Automobile Distributors (AAD).
Looking at the year-on-year comparison, medium commercial vehicle sales grew by 24.6% to 552 units. Sales in the heavy commercial vehicle segment increased by 6.5% to 327 units, while the extra heavy commercial vehicle showed a slight decline of 1.8% to conclude the month on 719 sales. Bus sales were down by 6.8% to 55 units.
In order to have a healthy and safe vehicle population, trucks need to be replaced every eight to ten years or so “We are very encouraged by the good start to the year,” says Gert Swanepoel, managing director of UD Trucks Southern Africa. “We foresee that certain macroeconomic influencers like the upcoming national elections and lower business confidence might dampen sales up to July.”
Challenging economic conditions
Gert says that 2018’s positive results proved that the truck market is resilient, even amid challenging economic conditions, and that businesses still choose to invest in new vehicles for their fleets. “One concern is that the average age of the local commercial vehicle is too high, at around 12 years currently. In order to have a healthy and safe vehicle population, trucks need to be replaced every eight to ten years or so,” he continues. Gert believes that more and more businesses are turning to modern smart logistics to ensure efficiency, productivity and profitability. Aspects like telematics are playing an increasing role in fleet and route planning, as the demand from consumers for faster turnaround times grows. UD Trucks Gert Swanepoel www.udtrucks.com
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
29
High security welded mesh
Pallisade
Gates
Gate Automation
Razor wire and more ....
What is High Security Weld Mesh HIGH Security Weld Mesh is wire fused and welded at a Horizontal distance of 76.2mm and a vertical distance of 12.7mm also known as 35B/3510 where 3 denotes 3”(distance between vertical wires), 5 denotes 0.5” (distance between horizontal wires), and B or 10 denotes gauge of wire
Salient Features • Difficult to Climb: The spaces between the Horizontal wires are too narrow for fingers to have grip • Impregnable: Extremely difficult to cut with a hand cutter as the beak of a wire cutter will not be able to penetrate the horizontal wires • Excellent Replacement option to Solid Wall as: 1. More economical than a solid wall 2. Faster to install than a solid wall 3. CCTV Camera has a clear view • Further upgrade possible with electric security system • Anti-corrosive & low maintenance
Standards
• Manufactured according to BS EN 10016-2 • Wire Sizes in accordance with BS EN 10218-2 • Tolerance on Mesh Size in accordance wiht EN 10223-7 • Tolerance on Panel Size in accordance with EN 10223-4 • Welding Strength in accordance with BS EN 1461 • Zinc Coating in accordance with EN 10245-1 • Anti Corrosion in accordance with BS En 3900 E4/F4
Tensile Strength • Wire has a tensile strenght of min 550 MPA
MARK: 083 454 6488 30
Email: mark@palifence.co.za
www.palifence.co.za
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
MARKET FORUM
Kicking off with a soft start The new ADXL soft starter series from Lovato, distributed by ElectroMechanica (EM), is designed for three-phase motors from 7.5kW to 160kW, in four frame sizes, EM Product Manager, Jaap Grobler explains. They allow for control of starting, stopping, monitoring, and protection, with integrated functionality for an efficient starting solution. A wide operational voltage range of 208 V AC to 600 V AC, a compact design, and advanced functionality make the ADXL series an efficient solution for most applications in all industries. Two-phase control during motor starting and stopping, combined with torque control during operation, provides optimised ramping characteristics. This ensures smooth start and stop functionality for all applications, significantly increasing the lifespan of connected motors and power transmission devices. Hence the ADXL series is an great choice for pumping applications where water hammering is normally a major problem. Kick-start functionality delivers high torque only during the initial starting period, permitting motors to be started when initial torque is insufficient to overcome friction. ElectroMechanica, Karen Zotter, Tel: (011) 249-5000 Email: karenz@em.co.za, www.em.co.za
Egyptians move into fertilization Thyssenkrupp’s plant engineering business has won an order from the Egyptian chemical and fertilizer manufacturer, El Nasr Company for Intermediate Chemicals (NCIC). The new fertilizer complex will be built in Ain El Sokhna, around 100 km southeast of Cairo, close to the existing NCIC phosphatic and compound fertilizer complex. It is expected to go into operation in 2022 and produce up to 440 000 tons of ammonia, 380 000 tons of urea and 300 000 tons
of calcium ammonium nitrate (CAN) every year. The new plants are part of NCIC’s plans to expand its current product portfolio to include high-quality nitrogen fertilizer for local and export markets. Thyssenkrupp Tel: (011) 236-1235 Email: info.tkissa@thyssenkrupp.com www.thyssenkrupp.com
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
31
MARKET FORUM
A water-tight agreement
A 3D schematic of a typical GS-Hydro pipe installation layout design.
Hytec South Africa and GS-Hydro, an Italy-based non-welded pipe manufacturer, have entered into an agreement, endorsing Hytec South Africa as a subSaharan Africa distributor for all GSHydro components and piping systems above 42mm. The distributorship increases Hytec South Africa’s product and service capabilities and presents new opportunities for distributing non-welded, leak-free piping systems. This is especially the case where projects include design and engineering, as GS-Piping Systems’ assemblies can be prefabricated to a high degree prior to installation, which speeds up the installation process and reduces overall costs. Hytec South Africa currently has GS hydro flaring and bending machines in use at its premises. The flaring
16 x 2mm (wall thickness) up to 60 x 6mm (wall thickness.) Depending on the outside pipe diameter, the bend radius provided is either 2.5 or 3.0, explains Hytec South Africa Engineering Manager, Andre Lindeque. machine provides 37° flaring with the capacity of flaring pipe sizes from 6 to 170mm, and the bending machine has the capacity to bend pipes sized from
Hytec Andre Lindeque Tel: 011 281 3800 E-mail: andre.lindeque@hytec.co.za www.hytecgroup.co.za
Outdoor enclosures for harsh environments The harsh environment protection benefits of GRP-based enclosures are now available for hundreds of new outdoor applications with the launch of new Type 4X certified enclosures and cabinets from Intertec. The company specialises in enclosures for outdoor applications, which are all fabricated using advanced GRP materials. GRP-based Type 4X enclosures are ideal for protecting field-based electrical and instrumentation equipment sited in marine and coastal areas, where the presence of salt in the atmosphere can severely damage traditional metal enclosures and shorten their service life. The company’s GRP is highly stable and virtually immune to the affects of salt
and most common petrochemicals and airborne pollutants. GRP has a similar strength to stainless steel but is about 75 percent lighter. Intertec’s Type 4X enclosures also include uniquely efficient insulation thanks to a proprietary triple-layer composite construction that ‘sandwiches’ advanced insulation material between sheets of GRP. This aspect makes these enclosures and cabinets ideal for applications in the harshest of environments and any region or application environment that must deal with difficult conditions involving ultra-cold or -hot temperatures. Intertec www.intertec.info
Leading Expertise. Delivered.
COLLIERY TRAINING COLLEGE (PTY)LTD
Colliery Training College: Artisan training for all employers in any industry.
Ask yourself the following question about artisan training: •
Does your training provider share your passion for safety?
Open Day for employers - 26 June 2019
www.ctctraining.org
Email: info@ctctraining.co.za 32
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
MARKET FORUM
Only nine percent of manufacturers to invest in digital Research by InfinityQS has revealed that only nine percent of manufacturers are planning to invest in digital transformation projects over the next 12-18 months. This was closely followed by 20 percent of manufacturers that have disclosed their plan to invest in waste production solutions over the same period. Jason Chester, Director of Channel Programs for InfinityQS, says, “The survey results highlight manufacturers’ lack of true understanding surrounding the benefits of digitalisation projects. According to a survey by PWC, manufacturing companies who embrace the digitalisation drive can expect to reduce operational costs by 3.6 percent per annum while increasing efficiency by 4.1 percent. “Yet, instead of focusing on digitalisation, manufacturers are prioritising spend elsewhere. “Waste reduction has been a priority among manufactures for many years, which consequently means any advancements are increasingly becoming even more marginal, delivering fewer returns for
firms. Any progresses in waste reduction lies in digitalisation projects that unlock significant improvements by enabling manufacturers to monitor and respond to the causes of waste more clearly. “Additionally, almost 50 percent of manufacturers say that they are going to invest in data collection, but that alone
only represents one part of an organisations digital transformation journey. If that investment is being made, it makes economic sense to use that data for manufacturing and quality intelligence,” concludes Jason. Jason Chester www.infinityqs.com
Metal casting with the big boys Through BMG’s acquisition of Rustenburg Engineering and Joerg Foundry in 2018, the company is now a major player the foundry industry. “This investment in a dynamic sector of the engineering business, enhances BMG’s service offering and broadens the company’s product range to include the supply of SG and cast-iron components and products to original equipment manufacturers and end-users,” says Anton Kritzinger, general manager, Rustenburg Engineering, which now forms part of the Engineering Solutions Group (ESG) business segment of Invicta Holdings Limited. “This acquisition is also a boost to the Fenner brand which BMG acquired over 20 years ago. BMG and Fenner are harnessing their respective strengths to develop sales opportunities throughout Southern Africa for ferrous casting supply. “We are now able to procure Fenner components from our own foundry, offering shorter lead times on Fenneraccredited components and products,” Anton concludes. Rustenburg Engineering and Joerg Foundry, BMG Anton Kritzinger Tel: (014) 538 1014 Email: antonk@joerg.co.za www.joerg.co.za BMG’s acquisition of Rustenburg Engineering and Joerg Foundry broadens the company’s product range to include the supply of SG and cast-iron components and products to original equipment manufacturers and end-users.
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
33
34
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
MARKET FORUM
Big project clinched for roller conveyors SEW-Eurodrive South Africa has clinched its largest project to date for its ECDriveS drive system for light-load conveyor technology. The project is for seven conveyors and 40 accumulation zones at a major automotive manufacturer in Gauteng.
tions, as it features both Ethernet and Profinet communications for seamless interfacing. Other major advantages are precise positioning and ramp-up and ramp-down, and the ability to vary the conveyor speed accordingly, which makes for a highly customisable system.
The latest order follows a demonstration project involving two small conveyors, with one over a production line, to move small components around the assembly area, explains SEW sales representative, Willem Strydom. The automotive manufacturer was so impressed with this initial foray that it has now embarked on a massive seven conveyor, 40 accumulation zone project, which is where the ECDriveS drive system really comes into its own, says Willem.
Sensor input and output is provided for easy monitoring, with an alarm triggered in the event of any problem. The drive system has an IP 54 protection rating, in addition to an IP 66 version
for more demanding applications. The temperature range is –10°C to 40°C, while the roller speed is up to 5m/s. Gearbox speeds range from 8.5rpm to 645rpm for added flexibility. Set-up is either by dual in-line package (DIP) switches, or the drive system can be programmed using proprietary SEW software. SEW-Eurodrive, Tel: (011) 248-7000 www.sew-eurodrive.co.za
The drive system has 40 W continuous power and up to 100 W dynamic power, optimised for the typical power ranges of roller conveyors used in light-duty materials-handling technology. The name is an acronym for Electronically Commutated Drive System, a brushless DC gearmotor. It is easily integrated into existing solu-
Oil free air supply Atlas Copco’s new ZE 3 oil-free rotary screw compressor is manufactured to operate in a broad spectrum of pneumatic conveying industrial applications. The compressor ensures a continuous 100% oil-free air supply at the lowest possible life cycle cost.
are protected against extreme ambient temperatures,” he concludes.
Atlas Copco, JC Lombard Tel: (011) 821-9800 Email: jc.lombard@za.atlascopco.com www.atlascopcogroup.com.
With the introduction of the new ZE 3, Atlas Copco offers a solution to OEMs who in the past often faced a limited choice of compressor manufacturers that could provide a reliable compressed air source. “The ZE 3 low pressure compressors incorporate our latest and well-proven oil-free screw element, a robust gearbox, and an IP55 motor which is completely enclosed for protection from dust ingress,” comments JC Lombard, Business Line Manager at Atlas Copco Oil-free Air Division. “Owing to the optimal process and cooling airflow design, the machines
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
35
36
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
MARKET FORUM
Bearings for food Specific to the food and beverage industry, NSK rolling bearings feature attributes like rustproof materials, sealed construction and lifelong lubricants that are compatible with foodstuffs. To help simplify the bearing choice in such processes, NSK has renewed its catalogue entitled ‘Solutions for the Food and Beverage Industries’. The publication features an overview of the sector and highlights the individual needs of food and beverage processing lines. Core products are also presented. One of the principal products highlighted is NSK’s Silver-Lube mounted unit series. Silver-Lube units comprise high-grade stainless steel bearing rings, cage and balls, with seal core and grub screws, grease nipple, and bolt-hole liners. Further design features include nitrile rubber seals and stainless steel flingers, along with a thermoplastic polyester resin housing. The bearings are factory filled
with a wide temperature foodgrade grease. Also featured is the LifeLube series of mounted units, which combine the corrosion resistance of a Silver-Lube housing with the sealing and lubricating attributes of Molded-Oil bearings. Of particular importance, Life-Lube bearings are suitable for wet environments, including those that use process fluids and/or chemicals. NSK’s Molded-Oil bearings are another prominent product. Deployed extensively in food and beverage plants, molded-oil bearings not only prevent the ingress of
contaminants such as water and particulates, but no lubricant can escape the bearing and enter other parts of the machine, where it could contact food. NSK South Africa, Geraldene Govender, Tel: (011) 458-3600, nsk-sa@nsk.com
Protection in explosive environments Organisations which use or deploy mobile PC tablets in volatile environments, where “flammable gases, mists or vapours or combustible dusts are present” must review whether they are compliant with the directive 99/92/EC which relates to minimum requirements for improving the safety and health protection of workers, the directive 94/9/EC which concerns equipment and protective systems intended for use in potentially explosive atmospheres.
They also need to adhere to the North American CID2, which is an ANSI/ISA certification for hazardous locations. “These regulations address usage of tablets or other electronic devices and are the most widely-accepted safety standards for devices used in hazardous environments where there is risk of explosion,” says Bruno Bothier, Sales Director for Xplore Products at Zebra Technologies
He concludes by saying the organisations operating in explosive environments must demand tablet manufacturers present either an ATEX Declaration of Conformity (DoC) or a C1D2 proof of compliance before buying a rugged device, regardless of where it will be used. Zebra Technologies Neil Gouveia, Tel: (011) 069-6210 Email: Neil.Gouveia@zebra.com www.xplore.com
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
37
On the Move
Mike Harrison, in addition to his role as General Manager Hytec South Africa and the company’s southern Africa business units, has been given the additional responsibility to oversee the Bosch Rexroth South Africa Group’s African distribution arm, Hytec Services Africa (HSA), as well as the Group’s East Africa Hub.
Andre Lindeque has been appointed to the position of Engineering Manager, Africa for Hytec South Africa.
Andre Lindeque
Mike Harrison
Vidya Ramnath
Tillmann Olsen
Malan Bosman
Emerson has appointed Vidya Ramnath as the new president for its Automation Solutions business in Middle East and Africa.
Tillmann Olsen has been promoted to the position of Regional President Africa for Bosch Rexroth AG in addition to his current role as Chief Executive Officer of the Bosch Rexroth SA Group.
Malan Bosman has been promoted to the position of National Sales Manager for Tectra Automation.
much more than just a pump in a
BOX
complete pumping solutions Email. info@pumptechnology.co.za 38
THE SOUTH AFRICAN MECHANICAL ENGINEER
www.pumptechnology.co.za VOL 71
April 2019
THE SOUTH AFRICAN MECHANICAL ENGINEER
VOL 71
April 2019
39
MegaCPK At the dawn of a new era With continuous research and investments, we have developed a totally new generation of products. A milestone in KSB's history and the dawn of a new era focused on quality, efficiency, safety and reliability in one package, worldwide. Our innovative new product line-up offers first-class quality and a host of new features that combine to make this pump truly unique. • • • •
Maximum operating reliability Outstanding efficiency from improved hydraulic systems Optimum energy efficiency Global availability
KSB Pumps and Valves (Pty) Ltd www.ksbpumps.co.za
> Our technology. Your success. Pumps• Valves, Service
KseliJ