Approaches to change public and private IPs
How to Change My IP Address? ď Ź
This really is one of the most common concerns. Individuals want to alter their public IP-ADDRESS for a number of factors. As an example, many p2p sharing systems including rapidshare demand download limits and limit downloads permitting just a limited number of downloads inside a given period of time per IP. They might require a specific passage through of time and energy to enable another download. Another reason wouldbe prohibitions by certain game servers, etc. on the foundation of IP-ADDRESSES. Therefore, people of such sites wish to change their IP address to circumvent such time restrictions, or even to bypass prohibitions.
If you have a fixed public (or WAN) IP address, the only way to change your IP is always to contact your ISP (Websites Provider), and send a formal obtain IP change. Consequently, below here applies simply to changing energetic community (or WAN) IP addresses, or your individual (LAN) IP addresses. If some of them does not work, you can consult our Q&A Board where other people can answer your questions.
A Practical Way to Change Your IP ď Ź
Provided that your IP is a powerful one, possibly the most useful approach is always to switch off your modem/router for a few minutes (in most cases, merely 10-20 seconds wouldbe enough), and switch it on again. Whenever you switch off your modem/router, your ISP returns it to its pool of available IP addresses, and may dynamically allocate it to a different person. When you reconnect to Internet, your ISP allocates you an IP that is for sale in its pool of IP addresses at that second. .
And because you will find virtually hundreds of thousands of private proxy services IPs for sale in its pool, the probability of having the same IP when reconnecting is quite low, say one out of 100,000. Therefore, the possibility to getting an alternative IP after switching off/on of your modem/router is extremely large. But if that doesn't alter your IP, repeat the procedure for longer intervals. As an example, switching it around the next-day, and switching off your cable/DSL modem immediately may lead to IPADDRESS change.
If this fails, you can try the following procedures to change your IP address:
How to Change IP Address in Windows 7 and Windows 8 Follow these steps to change your https private proxy IP address in Windows 7 / Windows 8: Find out your IP address e.g. go to My IP page, and note your IP address. "Go to Start" > "All Programs" > "Accessories" and right click on "Command Prompt" and then chose "Run as Administrator" Right click on "cmd.exe" and then chose "Run as Administrator" Alternatively, you can simply do this: "Start" > "Run" and type "cmd" (without quotes) Type "ipconfig /release" type "ipconfig /renew"
To change your IP address automatically in Windows 7 and in Windows 8 follow these steps: Go to "Start" > "Control Panel" Left click on "Network and Internet" and then select "Network and Sharing Center". On the left side choose "Change adapter settings" Right click on your network card and from the dropdown choose "Properties" Under the "Networking" tab chose "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and then click on "Properties"
In the next window you have option between "Obtain an IP from best private proxy Address Automatically" and "Use the following IP Address" You need almost always to select "Obtain an IP Address Automatically" to change IP address automatically. The other option, namely, "Use the following IP Address" is used for manually configuring a proxy server. Then, click on "OK". Your IP address should be changed
How to Change IP Address in Windows Vista
To improve your private proxy list IP-ADDRESS in Windows Vista follow these steps: Figure out your INTERNET protocol address e.g. Visit My IP page, and note your IP address. Goto "Start" > "Sites" > "Properties" > "Network and Expressing Middle" And then in "Network and Sharing Hub" rightclick on your network card Then, offer the resetting procedure to be continued by Vista permission.
How to Change IP Address in Windows XP To change your computers private proxy service IP address in Windows XP: Find out your IP address e.g. go to My IP page, and note your IP address. Go to "Start" > "Run" Type "cmd" (without quotes) In the window opened Type "ipconfig /release" Type "ipconfig /renew"
Network Method 2:
We have only discussed Community Process 1 in the beginning of this page whilst the "practical" solution to change internet protocol address. To alter your IP address during your network switch, follow these steps: Plug-In modem. Enter your password. When you have not selected a password, use the factory default password of "admin." No login is required. Key in 192.168.1.1 (this can be different) Within your browser's address bar.
Release the IP address of ssl private proxy. (Method varies by router manufacturer) Go to status. Click DHCP Release. Under Setup in the grey bar go to Mac Address clone on the blue bar. Click enable, then click clone pcs Mac address. Save settings. Unplug the modem, but keep the router plugged in. With the modem unplugged, go to status. Click DHCP renew. Plug in modem.
Changing your IP Address on Mac OS X
Close out of any applications that are connected to the Web. Click on the Apple menu and choose System Preferences. Go to the View menu and choose Network. Go to the Show menu and choose Active Network Ports. Click to deselect the checkbox for the port you use to connect to the Internet.
Click Apply Now, reselect the port checkbox and click Apply Now again. Open a Web browser and try to connect to a Web page. If this doesn't work, power cycling your modem (turning it off, waiting a few seconds and turning it back on) may help.
Thanking you.. For more info log on too.. http://proxiesforent.com