Approaches to transform public and private IPs
How to Change My IP Address? ď Ź
That is one of the most frequent issues. People need to alter their public INTERNET protocol address for a number of causes. For instance, many p2p sharing communities such as rapidshare demand download limits and restrict downloads permitting only a limited quantity of downloads within a given time period per IP. They require a specific passing of time to enable another download. Another reason would-be restrictions by selected game servers, etc. on the basis of IP-ADDRESSES. Therefore, people of such sites need to change their IP address to circumvent such time limitations, or to bypass bans.
If you have a static public (or WAN) IP address, the only path to change your IP is always to contact your ISP (Websites Provider), and submit a formal obtain IP change. Thus, below here applies simply to changing powerful public (or WAN) IP addresses, or your private (LAN) IP addresses. If any one of them doesn't work, you can request our Q&A Board where other users can answer your questions.
A Practical Way to Change Your IP ď Ź
Provided that your IP is a powerful one, possibly the most practical approach is to switch off your modem/router for a few minutes (in most cases, simply 10-20 seconds will be enough), and switch it on again. If you switch off your modem/router, your ISP returns it to its pool of available IP addresses, and may dynamically allocate it to a different person. When you re-connect to Internet, your ISP allocates you an IP that is for sale in its pool of IP addresses at that minute.
And since there are literally hundreds of thousands of personal cheap proxy IPs obtainable in its share, the chances of getting the same IP when reconnecting is very low, say one out of 100,000. So, the opportunity of having a different IP after switching off/on of one's switch/router is very large. But if that does not change your IP, repeat the process for longer intervals. For instance, switching it on the next-day, and switching off your cable/DSL modem immediately might bring about IP address change.
If this fails, you can try the following procedures to change your IP address:
How to Change IP Address in Windows 7 and Windows 8 Follow these steps to change your https private proxy IP address in Windows 7 / Windows 8: Find out your IP address e.g. go to My IP page, and note your IP address. "Go to Start" > "All Programs" > "Accessories" and right click on "Command Prompt" and then chose "Run as Administrator" Right click on "cmd.exe" and then chose "Run as Administrator" Alternatively, you can simply do this: "Start" > "Run" and type "cmd" (without quotes) Type "ipconfig /release" type "ipconfig /renew"
To change your IP address automatically in Windows 7 and in Windows 8 follow these steps: Go to "Start" > "Control Panel" Left click on "Network and Internet" and then select "Network and Sharing Center". On the left side choose "Change adapter settings" Right click on your network card and from the drop-down choose "Properties" Under the "Networking" tab chose "Internet Protocol Version 4 (TCP/IPv4)" or "Internet Protocol Version 6 (TCP/IPv6)" and then click on "Properties"
In the next window you have option between "Obtain an IP Address of proxy server Automatically" and "Use the following IP Address" You need almost always to select "Obtain an IP Address Automatically" to change IP address automatically. The other option, namely, "Use the following IP Address" is used for manually configuring a proxy server. Then, click on "OK". Your IP address should be changed
How to Change IP Address in Windows Vista
To alter your private proxy list IP address in Windows Vista follow these steps: Figure out your IP e.g. go to My IP page, and note your IP address. Goto "Start" > "Systems" > "Properties" > "Network and Spreading Hub" And then in "Network and Sharing Hub" right-click on your network card Then, offer Landscape permission to carry on the resetting procedure.
How to Change IP Address in Windows XP To change your computers private web proxy IP address in Windows XP: Find out your IP address e.g. go to My IP page, and note your IP address. Go to "Start" > "Run" Type "cmd" (without quotes) In the window opened Type "ipconfig /release" Type "ipconfig /renew"
Network Method 2:
We have just defined Circle Method 1 at the best private proxy service beginning of this page because the "practical" way to change ip address. To alter your INTERNET protocol address through your network router, follow these steps: Enter your password. When you have not selected a password, utilize the factory default password of "admin." No username is required. Enter 192.168.1.1 (this might be different) Within your browser's address bar. Plug-In computer.
Release the IP address of private proxy service . (Method varies by router manufacturer) Go to status. Click DHCP Release. Under Setup in the grey bar go to Mac Address clone on the blue bar. Click enable, then click clone pcs Mac address. Save settings. Unplug the modem, but keep the router plugged in. With the modem unplugged, go to status. Click DHCP renew. Plug in modem.
Changing your IP Address on Mac OS X
Close out of any applications that are connected to the Web. Click on the Apple menu and choose System Preferences. Go to the View menu and choose Network. Go to the Show menu and choose Active Network Ports. Click to deselect the checkbox for the port you use to connect to the Internet.
Click Apply Now, reselect the port checkbox and click Apply Now again. Open a Web browser and try to connect to a Web page. If this doesn't work, power cycling your modem (turning it off, waiting a few seconds and turning it back on) may help.
Thanking you.. For more info log on too.. http://proxiesforent.com