دليل اإلختيار
أجهزة إختبار المواد
ﺃﺟﻬﺰﺓ ﺇﺧﺘﺒﺎﺭ ﺍﻟﻤﻮﺍﺩ
ﻓﻬﺮﺱ ﺇﺧﺘﻴﺎﺭ ﺍﻟﻤﻨﺘﺠﺎﺕ 2 ﺑﺮﺍﻣﺞ ﻳﻮ ﺗﻲ ﺇﻡ8
Matest © Copyright 2012 No parts of this catalogue can be reproduced without the written permission of Matest. Matest ongoing research and development may conceive new products, that cannot be included in this catalogue. Some products may have different countries of origin. Some new items can be available, others can be discontinued. Pictures and descriptions do not bind the company: Matest reserves the right to alter the products specifications at anytime without notice.
ﺻﺨﻮﺭ | ﺣﺼﻤﺔ10
ﺃﺳﻔﻠﺖ | ﺑﻴﺘﻮﻣﻴﻦ14
ﺧﺮﺳﺎﻧﺔ20
ﺃﺳﻤﻨﺖ28
ﺣﺪﻳﺪ32
ﺗﺮﺑﺔ34
ﺃﺟﻬﺰﺓ ﻋﺎﻣﺔ38
أجهزة إختبار المواد
www.matest.com آخر األخبار المحدثة على الدوام مـن خـالل موقـع ماتيسـت التفاعلـي علـى الشـبكة العنكبوتيــة يمكنكم تصفح أكثر من 5000منتج مع ارقام المواصفات القياسية والتفاصيل الفنية موقع ماتيست يجري تحديثه يومياً بآخر المستجدات في الشركة وبالمنتجــات الجديــدة والمطبوعــات وكـذلك بأخبــار التواجـد فـي المعارض التجارية العالمية إن هذا الكتالوج يحوي كمية محدودة من الخيارات المصنعـة في ماتيست من أجهزة فحص المواد الخاصة بصناعة اإلنشاء. أما النطـاق الكامـل من المنتجـات واإلكسسـوارات وقطـع الغيـار فتجدونها في كتالوج ماتيست العام والذي يصدر بأربع لغات
قرص تفاعلي يمكنكم كذلك الحصول على كتالوج ماتيست العام على قـرص مـرن مـن وكيـل ماتيسـت األقـرب لكــم أو بالطلـب من info@matest.com
5
4
أجهزة إختبار المواد
صنع في ماتيست صنع في إيطاليــــا ماتيسـت هي المصنـع األول في العالم ألجهزة إختبـار المـواد الخاصة بصناعة اإلنشاء تعرض ماتيسـت حلـول متطـورة للمـواقـع والمختبـرات لفحـص الحصمة والصخور والبيتومين واألسفلت والخرسانة واإلسمنت والحديد والتربة اليوم ،ماتيست مؤهلة ومعترف بها عالمياً ،وتعتمد على
طاقة إنتاجية عالية وفاعلة على أكثر من 6000متر مربع • مثابرة متواصلة على البحث وتطوير منتجات جديدة • منتجات بجودة عالية يمكن اإلعتماد عليها طورت من قبل •
ماتيست لألبحاث والتطوير
أفضل معدل جودة إلى سعر في األسواق نطاق واسع من المنتجات يحوي أكثر من 5000بند مخزون متكامل ومتوفر لتأمين مدد توريد قصيرة خدمات فنية مساندة على درجة عالية من التأهيل
• • • •
خدمات المعايرة ماتيست مؤهلة كمركز ميترولوجي لمعايرة أجهزة الضغط وفق ًا لــــ UNI EN 12390/4, UNI EN ISO 7500/1 and BS 1610/1
LAT No 214 Signatory of EA, IAF and ILAC Mutual Recognition Agreements
مصــــنع معتمـــد ISO 9001:2008 ماتيســـت حـاصـلة علـى شــهادة األيــزو 9001لتصـميم وصناعة وتقديم الدعم الفني وبيع أجهزة ومعدات القياس لفحص ومعاينة مواد اإلنشاء
7
6
أجهزة إختبار المواد
الرخص المتاحة
صخور حصمة
A150N
على أرضية ويندوز لتتيح2 قامت ماتيست بتطوير برنامج يو تي إم للمستخدمين إدارة وتحكم أفضل في أجهزتها الرقمية الدقة والتخزين األتوماتيكي للمعلومات هي، السرعة،المرونة الذي أعد إلدارة وتطبيق أكثر،2 الميزات الرئيسة لبرنامج يو تي إم اإلختبارات تعقيداً حتى من قبل من يتمتعون بمهارات محدودة في إستخدام الحاسب اآللي ، على أوجه إختبارات مسبقة اإلعداد2 يشمل برنامج يو تي إم متسقة مع المواصفات األوروبية ومعظم أهم المواصفات القياسية العالمية
أسفلت بيتومين
UTM2 برنامج 2 جهاز اإلختبارات العامة
compression uniaxial and triaxial elastic modulus on rocks
B043-01N
B043-02N
B043-03N
Marshall compression tests
splitting tensile tests on bituminous mixtures
Marshall and Leutner tests
C109-10N
C109-11N
C109-12N
C123N
C104-10N
C125N
compression tests on concrete
flexural tests on concrete
splitting tensile tests on concrete specimens and block pavers
Servonet for the remote control and management of the testing machines through a PC
Servo-Strain for the automatic servo-control and management of the testing machines to measure load/strength, displacement and strain
secant compression elastic modulus on concrete
E163N
E164N
C123N
S205-08
E190N
compression tests on cement/mortar
flexural tests on cement/mortar
Servonet for the remote control and management of the testing machines through a PC
tensile tests on mortar briquettes
compression elastic modulus on mortars
H009N
C123-01N
tensile tests on metals and other materials (plastic, wood, composed materials etc.)
compression tests on steel with H011-01N machine
S218N
S218-01N
CBR tests on soil
unconfined compression tests on soil
متطلبات النظام
n automatic identification of the machine connected to the PC; n remote and interactive control of the testing machine; n easy set up of the operations sequence of the test to be performed; n customization of test profiles (data setting, properties of the measuring analogue channels and of the speed charts); customization of colours and scales of the graphs and the screens activated; customization of test certificates (document heading, date, test type, graph type and number of pages);
حديد
UTM2 برنامج المزايا األساسية
أسمنت
، متوفرة بلغات مختلفة (اإليطالية2 رخص برنامج يو تي إم ، التشيكية، البولندية، األلمانية، اإلسبانية، الفرنسية،اإلنجليزية ،) اللغات األخرى متوفرة بحسب الطلب:السلوفاكية وكذا التركية ويندوز،2000 ويندوز:ويمكن تحميله على أنظمة التشغيل التالية ( سيتم تطوير البرنامج ليالئم7 وويندوز، ويندوز فيستا،إكس بي أي أنظمة تشغيل جديدة تطرح الحقا)ا
خرسانة
وهو أفضل الحلول، سهل التحميل واإلستخدام2 برنامج يو تي إم ألي فرد يدير إنتاجية عالية و كذلك لمختبرات األبحاث والفحص
n selection of the algorithms used by the software to process the results required by the Standards; n visualization of the instant loads; instant definition of the load/deformation/stroke graph with “zoom” function on the graphic points of interest; visualization of emergencies, alarms and possible errors;
n data storage of all the parameters set for the test, with the possibility to process them again and manage the test archive;
تربة
n memorization of the test results into a database, that can be elaborated by the operator (test data can be commented by means of text titles to be reported on the certificate or on the graph);
n certificates printing according to a pre-set layout, adjustable and customizable by the operators using their company logo or other information.
8
9
أجهزة إختبار المواد
مناخل اختبار بشبكة معدنية محاكة أو صفيحة مثّقبة
مطرقة تصنيف صخور مع حامل للصخور
A031 ÷ A050
C381 with A121
EN 933-1 / EN 933-2 / ASTM E11
ASTM D5873
A complete range of test sieves, available in different diameters and in all the openings requested by the International Standards.
The impact hammer is used for rock classification test. It tests a rock specimen all along its length to obtain an average value of the readings.
All models can be supplied with woven wire mesh or perforated plate with round or square holes.
Impact energy: 0,74 Nm
صخور ׀ حصمة
Measuring range: 10 ÷ 60 N/mm2
صندوق محمول الختبار قص الصخور A129 ASTM D5607
أفران مختبر A007 ÷ A008-01 KIT
فهرس قوة الصخور جهاز رقمي الختبار الحمل المركز
EN 932-5 / EN 1097-5 / ASTM C127, C136, D558, D559, D560, D698, D1557, D1559
A125
Capacity: from 50 to 750 litres
ASTM D5731
Made of stainless steel, the ovens are double walled with glass fibre for thermal insulation.
The equipment accepts core specimens with max. diameter of 4” (101,6 mm).
All models are equipped with a digital thermoregulator and a dual safety thermostat.
Supplied with a digital display unit:
This equipment can be used both on site and in laboratory to determine the strength and slope stability of rocks with max. size of 115x125 mm or cores with max. diameter of 102 mm.
• range: 0-56 kN
Available models: • natural convection: series A007
• divisions: 65,000 points
• resolution: 0.001 kN
• forced ventilation: series A008
• accuracy: ± 1%
هزاز مناخل إليكترومغنطيسي
فك طاحن لألستخدام في المختبر
A059-02 KIT
جهاز نفاث للتنخيل بالهواء A058-05N
A092
Matest sieve shakers are sturdy and designed with a triple vibrating action (vertical, lateral and rotational). They are supplied with separate digital control panel for the management of the sieving time, the vibrating intensity and the vibrating action (continuous or intermittent).
UNE 83120 Designed to crush any kind of material. The crusher is also suitable to prepare the material to be reduced to powder with the jar mill (series A091).
Different models are available for sieves with diameter from 200 mm to 450 mm, or from 8’’ to 18’’.
EN 933-10 This model is suitable to sieve powder and dry grain products by using sieves with diameter of 200 mm, in order to obtain sieving results between 5 and 4,000 micron.
قسام عينات كبير السعة A068
10
EN 932-5
مقياس الشكل فهرس الشكل
EN 933-3 / ASTM C136
A072
A very solid product, totally galvanized for rust protection.
EN 933-4 / EN 933-5 / EN 933-7
The sample splitter is designed for the reduction of large aggregates (max. diameter of 108 mm) into small samples suitable for laboratory tests.
This product is used for measuring the length-thickness ratio of aggregates.
11
أجهزة إختبار المواد
جهاز اختبار مقاومة اإلنزالق واإلحتكاك A113 EN 1097-8 / EN 1338 / EN 1339 / EN 1341 / EN 1342 / EN 13036-4 / EN 1436 / ASTM E303 The apparatus is designed to perform polished stone tests on aggregates and to measure pavement surface frictional and skid resistance properties.
الضغط اآلحادي والثالثي معامل مرونة الصخور Automatic system with pace rate control also during the load release. A150N UNI 9724-8 / ASTM D7012 The system can be used with Matest high stability compression machines with capacity of 2000 or 3000 kN, combined with the automatic servocontrolled system “Servo-Plus Evolution” (code C104N, page 21).
صخور ׀ حصمة
The equipment includes: hydraulic system, electronic measuring system and UTM2 software for data acquisition and processing. The system can be used with:
• electric single use extensometers (strain gages, series C125) or
• universal electronic mechanical extensometers/compressometers (code C134)
خاليا هويك لالختبار الثالثي على الصخور A137 Used to measure the strength of cylindrical rock specimens subjected to triaxial test. The Hoek cell is composed of: • one body complete with two screwed end caps • two self-sealing couplings • two hardened, ground, spherical seats and pistons • one specimen jacket Available in different models and sizes. Matest offers the complete equipment for triaxial tests on rocks.
جهاز الصقل المتسارع لتحديد قيمة الصقل الصخري A128N
منتجات أخرى
EN 1097-8 / EN 1341 / EN 1342 / EN 1343 The machine measures the resistance of road aggregates, paving stones and blocks to the polishing action of vehicle tyres on a road surface. The digital control panel at the back side of the machine allows the operator to select the test time.
جهاز لوس أنجيليس A075 EN 1097-2 / EN 12697-17 / EN 12697-43 ASTM C131 This product is used to determine the aggregates resistance to fragmentation. The machine is supplied with an automatic digital counter for the management of the revolutions. Also available with CE security cabinet, lined with sound-proofing material for noise reduction.
12
جهاز اختبـار ميكرو ديفال A077 EN 1097-1 / EN 13450 Designed to determine the resistance of aggregates to abrasion. The machine accepts up to 4 cylinders simultaneously and is supplied with a separate control panel with an automatic digital revolution counter.
Abrasion machine, Dorry A111 Abrasion tester for natural stones and concrete A112 Aggregate crushing value apparatus A082 Aggregate impact value apparatus A080 KIT Apparatus for crushing resistance determination A081-01 Apparatus for thermal and weathering properties of aggregates A103-10 Bar (grid) sieves, EN 933-3 A048 KIT Barton comb, profilometer A122 Bulk density and voids measures A069 Calcimeter, (gasometer) Dietrich-Frühling A105 Chapman flask A029 Chloride content in sand and fine aggregates, Rapid Method A019-01 Compression device for rock cores A147 Core drilling barrels for Hoek cells A137-04 Coring machine for rocks, laboratory use A140-01 Crushing coefficient machine A108 Cutting-off machine A127
Desiccators borosilicate glass with perforated plate Deval testing machine Dry mixer Efflux index apparatus End-Over-End shaker, BS 1377:2 Extruder for rock specimens Filler compaction apparatus Flakiness sieves, BS 812 Flakiness/thickness gauge Flatness index gauge Geological hammers for rocks Hydraulic constant isotropic cell pressure system Jar mills Magnesium sulphate test Melting pot Microwave oven Mohs’ kit Moisture meter “Microlance”
A035 A079 A093 A073 A117 A141 A124 A049-01 A070 A048-15 A132 A142 A091-10 A103 A106 A009 A115 A021
Muffle furnace A022 Permeability constant oil/water pressure system A144 Polisher, grinder A095 Prism mould for the determination of drying shrinkage, EN 1367-4 A107 Quartering canvas A085 Reaction container A030 Rock permeability apparatus with Hoek cells A144 Sample splitters, riffle boxes A062 Sieve shaker, high capacity A061N Siphon can apparatus A084 Slake durability apparatus for rocks A130 Speedy moisture testers A025 KIT Sulphate test strips A019-03 Tilt test A122-10 Triaxial test on rocks A137 Ultrasonic cleansing bath A104 Volumeter for aggregates A086 Wet washing sieves A045
Also available with CE security cabinet, lined with sound-proofing material for noise reduction.
13
أجهزة إختبار المواد
التقنية المتميزة
مجموعة ماتيست الكاملة من منتجات فحص األسفلت
مدحلة الدك B039 EN 12697-33 The machine has been developed and manufactured entirely by Matest and is used to produce representative sample slabs of several dimensions of bituminous mixtures laid and compacted on site. The compaction is performed through a segmented roller with alternated operated rotation which simulates the on-site action of a street roller.
أسفلت ׀ بيتومين
The compaction cycle can be programmed in accordance to a certain load or deformation value. The flexibility of the program grants the production of samples with uniform density and dimensions, fully meeting Standards specifications and research requirements; these samples are compatible for rut test with Matest Wheel Tracking apparatus B038.
جهاز ماتيست للدك الدوار B041
The sample slabs can be also cored or cut off to obtain cylinders and beams for bending fatigue, indirect tensile, static and dynamic creep, stiffness, and 4-point tests.
EN 12697-10 / EN 12697-31 / ASTM D6925 / AASHTO T312 / SHRP M-002
Main features:
The gyratory compactor is used to simulate the real compaction conditions achieved under actual road paving operations, hence determining the compaction properties of asphalts. This model is entirely designed and manufactured by Matest; it works combining an electromechanical rotation with a pneumatically operated vertical pressure. It accepts standard or perforated moulds for emulsified asphalts with diameter of 100 and 150 mm. The machine is equipped with digital PC-based (Windows) control unit with full colour and touch screen display for the management, control and visualization of test data, screens and graphs.
• sturdy frame made of steel
• PC based control unit with full colour and touch screen display
• Internet and Intranet connection for remote technical assistance
• unlimited memory: 2 USB-Host ports and 1 SD card slot
• RS 232/485 serial ports
• Heating of the segment roller (optional)
جهاز مسار اإلطارات B038 EN 12697-22 / BS 598:110 Wheel tracker is designed to assess the resistance to rutting of bituminous samples under conditions that simulate closely the effect of slow moving traffic.
جهاز الحلقة والكرة األتوماتيكي B070N EN 1427 / ASTM D36 This high technology apparatus has been developed by Matest R&D staff to determine automatically the softening point of asphalts and pitches, assuring high quality and affordable results. Main features:
• large graphic display 320x240 pixel
• RS 232 port for PC connection
• user-friendly menu for test control during all phases
• top quality components: laser sensors, electronic magnetic stirrer, ceramic glass heating plate
• memory capacity: up to 300 tests
• fully automatic test execution
The apparatus has a data acquisition and processing system for automatic test control. The test is conceived for laboratory application: a rubber tyred wheel of outside diameter of 200 mm is loaded with 700N ± 10 (EN Standard) or 520N (BS Standard) and rolled over a rectangular or cylindrical sample held on a moving table under constant and controlled temperature. The load is applied on the sample through a lever and the wheel penetration (rut depth) is measured in real time by means of a linear transducer of 40 mm travel, 0.01 mm accuracy. Matest Wheel Tracker accepts samples with dimensions up to 400x500 mm, 180 mm high (this mould can be used with Matest Roller Compactor). Test results can be automatically downloaded when a serial connection is activated and data transmission to PC is obtained through the RS 232 port. Once the results have been sent to a PC, the operator will be able to analyse them - as described by the Standards - and to issue the test certificate. No software installation is required as data acquisition can be easily obtained through the Hyperterminal program that is provided with almost all computers. The text file can be also imported into Word or Excel programs for data analysis and test certificate issue.
Other model available: manual ring and ball apparatus (code B072).
14
15
أجهزة إختبار المواد
جهاز محتوى البيتومين بطريقة اإلشعال B005 EN 12697-39 / EN 13108 / ASTM D6307 / NCAT (National Centre for Asphalt Technology)
كن50 إطار تحميل مارشال رقمي طاقة B043 KIT EN 12697-34 / EN 12697-23 / EN 12697-12 / EN 13108 / ASTM D1559 / ASTM D6927-06
The unit provides automatically the asphalt content of bituminous paving mixtures with an accuration of 0.11%.
Ruggedly manufactured and easy to use, Marshall digital frame can be equipped with different accessories to perform:
The ignition method is fast, accurate, environmentally friendly and cost effective, and replaces the costly and time consuming solvent extraction method.
• Marshall test
• direct shear test (Leutner) on bituminous specimens
• indirect tensile test on bituminous mixtures
أسفلت ׀ بيتومين
The machine is equipped with Cyber-Plus Evolution digital control unit, 8 channels.
وحدة إستخالص البيتومين األتوماتيكية
مدكات مارشال األتوماتيكية
B008
(different models are available)
EN 12697-1 / EN 13108 / ASTM D2172
B031N
Used for precise and reliable analysis on bituminous mixtures. It determines the quantity of binder or bitumen contained in pavement samples and hot mixed mixtures by means of no cancer producing solvents (PCE), R40 classification.
EN 12697-10 / EN 12697-30 / ASTM D1559 / ASTM D6926 Marshall compactors are used to determine the compactability of hot mix asphalt. Available models: manual or automatic compactors for moulds of different diameters, in accordance to EN and ASTM Standards.
جهاز اإلستخالص بالطرد المركزي جم1500/3000 سعة B011 EN 12697-1 ASTM D2172
clause
B.1.5
/
EN
13108
The centrifuge extractor is used for the determination of bitumen percentage in bituminous mixtures.
لتر10 وعاء فراغي سعة
Supplied complete with rotation speed regulator and digital display for frequency monitoring.
B067N EN 12697-5 / EN 13108 / ASTM D2041
Other models available: “explosion proof” (code B011-01) and centrifuge with safety electromagnetic micro-switch system.
Determination of theoretical maximum specific gravity of uncompacted bituminous paving mixtures (Rice-Test). This product is designed for a rapid determination of: asphalt content in bituminous mixtures, bulk specific gravity of aggregates, max. theoretical specific gravity of bituminous uncompacted road mixtures, and percentage of air voids in compacted mixtures.
جهاز إستخالص بالطرد بدون فلتر-المركزي ذو التدفق المستمر
أجهزة إختبار اإلختراقية بساعة قراءة أو رقمية، نصف أوتوماتيكية،قياسية B056 KIT / B056-01 KIT
B014
EN 1426 / ASTM D5
EN 12697-1 clause B.2.1 / EN 13108 / ASTM D1856
Ruggedly constructed, Matest penetrometers are used to determine the consistency of a bituminous sample under fixed conditions of load, time and temperature.
Designed for a quick filterless separation of filler from binder solution - or other mixtures containing sediments in suspension (cement, soil, clay) - by means of the continuous flow system (11500 rpm).
The penetration is expressed in distance of tenths of millimeters vertically penetrated into the sample by a standard needle. Available models: standard or semi-automatic, dial or digital.
16
17
أجهزة إختبار المواد
جهاز التحميل اللوحي لمواد رصف الطرق B103-05 KIT NF P94-117-1 Designed to calculate the static deformation of flexible road pavement (EV2) in the centre of the loading plate. The equipment consists of: 600 mm dia. bearing plate made of cast aluminium with reinforcing ribs and coupling device, hydraulic loading jack 200 kN capacity, hand pump, rubber pipe with fast connector, set of extension rods of different lengths, carrying case, precision pressure gauge 0-200 kN div. 1 kN, and upper spherical seat.
أسفلت ׀ بيتومين
جهاز عارضة بنكلمان
فرن إختبار الرقائق الدوارة
B100
B066 KIT
The apparatus is made of aluminium alloy and supplied complete with dial indicator and accessories.
EN 12607-1 / ASTM D2872 The oven measures the air and heat effect on a moving film of asphaltic semisolid materials.
قياسية ورقمية،حمامات مائية لعينات المارشال
It is used to measure the deflection of the road surface when loaded by the wheels of vehicles. The measurement of the deflection is performed when the vehicle passes over the test area.
Made of stainless steel with an insulated fiberglass intermediate chamber, the oven is provided with a large glass door for inspections and a dual safety thermostat to prevent accidental over-heatings.
Available models:
• B100 in accordance to CNR N° 141
(beam fulcrum ratio 4:1)
B052
EN 12697-34 / EN 13108 / ASTM D1559 / ASTM D5581
(beam fulcrum ratio 2:1)
• B102 in accordance to NF P98-200-2 / AASHTO T256-77
Water baths are suitable for general laboratory use and conceived to maintain specimens submerged into water at a constant temperature of:
• 60°C ± 1°C for Marshall specimens
• 37.8°C ± 1°C for asphalt specimens
منتجات أخرى
Available models: baths with analog or digital thermostat, baths with cooling device.
قياسي ورقمي،جهاز قياس الممطولية B055-10
أجهزة قياس اللزوجة B080
EN 13589 / EN 13398 / ASTM D113
EN / ASTM
Ductilometers are made of stainless steel with fibreglass insulation for the determination of bituminous ductility.
These products are used to determine the specific viscosity of road-oils, tars and petroleum products.
Advanced models:
• B055-10 ductilometer with data acquisition system Cyber-Plus Evolution 8 channels;
• B055-20N ductilometer with data acquisition system Cyber-Plus Evolution 8 channels, “high performance”; it accepts up to 3 specimens.
18
B016
Cabinet with aspirator
Asphalt emulsions: storage stability determination
B063-05
Cabinet with aspirator for automatic extraction unit
Asphalt indentation penetrometer
B059-10
Air bath for bitumen
Matest offers a complete range of viscometers with 1 or 2 elements: Engler, Standard TAR (BRTA, Redwood) and Saybolt.
B079
Marshall stability mould
B046N
Mixers for bitumen
B027
B008-10
Mot straight edge
B099 KIT
Cleveland tester
B086 KIT
P.R.D. mould
B097
Cohesion tester
B053-10
Pav, Pressure Ageing Vessel
B091
Pensky Martens digital flash point tester
B094 KIT
Permeameter for draining pavements
B024
Permeameter, radial-flow falling head
B024-10
Planetary abrasion tester, EN 12274-5
B053-20
Rate of spread device
B053-05
Reflux extractor
B019 KIT
Rotary evaporation apparatus
B065
Sand patch equipment
B099-10
Solvent recovery still
B021
Soxhelet modified method
B016-20 KIT
Tag closed-cup viscometer, flash point
B092 KIT
Tensile splitting device for bitumen
B047-02
Travelling beam device
B098
Vialit, binder adhesion test
B053
Water bath for bitumen penetrometer
B058
Wilhelmi softening point apparatus
B072-20
Asphalt oven with rotating shelf, TFOT method
B064 KIT
Automatic digital penetrometer
B059 KIT
Cyber-Plus Evolution, 8 channels touch screen control unit
Bacon sampler
B060
Dean-Stark, water in bituminous materials B076
Bearing plate for road pavements
B103-10
Distillation of cut-back asphalts
B069 KIT
Binder recovery apparatus, vacuum pump method B018
Drainage basket for binders
B022-20
Bituminous binders: determination of solubility B075-05
Duriez test set, moulds
B095-01
Bituminous emulsions: determination of particle polarity
Electromagnetic Density Gauge “non nuclear” B111 B063-10
Bituminous emulsions: determination of penetration power
B075-08
Bituminous emulsions: determination of settling tendency
B075-01
Bituminous emulsions: mixing stability with cement
B076-23
Bituminous emulsions: residue on sieving
B076-21
Bottle rolling machine
B022
Breaking value of cationic bitumen emulsions, mineral filler method
B090
B044N-SET
Emulsified asphalt distillation apparatus
B063 KIT
Fraass apparatus
B077 KIT
Hot extraction apparatus, wire mesh filter method
B017 KIT
Hot extractor set, paper filter method
B016-10
Hot plate with magnetic stirrer
B073-01
Hot plates
B074/V200
Kumagawa extractor (Soxhelet)
B061 KIT
Marshall compacting equipment
B029 KIT
Marshall compactors, manual
B032 KIT B032-01
All models are made of steel and equipped with digital thermoregulator and dual safety thermostat.
19
أجهزة إختبار المواد
السايبر-بلس المطورة اإلرتقاء اإللكتروني مع ثمان مداخل تناظرية
وحدة التحكم اإلبداعية بشاشة لمسية تعمل كحاسب آلي مع نظام ويندوز التشغيلي خرسانة
ثمان مداخل تناظرية للربط مع ثمان خاليا تحميل أو وحدات إستشعار
•
مصممة لتعمل كحاسب آلي بنظام ويندوز التشغيلي
•
إتصال مباشر مع اإلنترنيت للحصول على مساعدة فنية عن بعد
•
شاشة لمسية باأللوان 1/4 ،في جي آي
•
تفاعل ودي مع المستخدم +لوحة تحكم بخمس أسهم
•
مزودة بطابعة تخطيطية
•
زر إيقاف للطوارئ
•
ذاكرة غير محدودة – 2مداخل يو إس بي ،فتحة بطاقة أس دي
•
اإلبداع يمر من هنا
إمكانية ربط عدد 2من إطارات التحميل أو خاليا الضغط أو وحدات اإلستشعار • تحكم عن بعد وإدارة للوحدة عن طريق لوحة مفاتيح الحاسب اآللي
•
تعمل بـ 220فولت 1 ،فاز 50/60 ،هيرتز 70 ،وات
•
السايبر-بلس المطورة
C109N A new PC-based and TOUCH SCREEN control unit produced with the latest technology for the management and control of SEMI-AUTOMATIC TESTS on construction materials. Cyber-Plus Evolution control unit can be also installed on concrete/mortar compression and flexural machines not manufactured by Matest.
السيرفو-بلس المطور
C104N A new PC-based and TOUCH SCREEN control system produced with the latest technology for the management and control of FULLY AUTOMATIC TESTS on construction materials. THE SYSTEM IS COMPOSED OF: • Cyber-Plus Evolution C109N +
• multi-piston electric pump with variable flow driven by a microprocessor
ACCESSORY: )• console for Servo-Plus Evolution (code C104-04
POWER SUPPLY: 230V 1 ph 50Hz 750W
السيرفو-بلس المطور مع وبدون غطاء لوحدة التشغيل
21
20
أجهزة إختبار المواد
أوسع نطاق من أجهزة إختبار اإلطارات: إطار من أربع أعمدة مسبقة اإلجهاد
•
إطار من أربع أعمدة عالية اإلستقرار
•
يدوياً أو آلياً
•
الضغط واإلنثناء للخرسانة تنتج ماتيست أوسع نطاق من أجهزة إختبار الضغط واإلنثناء للعينات الخرسانية المتفقة مع المواصفات القياسية العالمية EN, ASTM, AASHTO, BS, NF, UNI, DIN, UNE
خرسانة
تعمل بـ: نظام القياس: عداد (ساعة قياس) مفرد
•
عداد (ساعة قياس) مزدوج
•
وحدة تحكم ذات قناتين
•
وحدة تحكم تعمل باللمس ذات 8قنوات
•
مكعبات ،إسطوانات وبلوكات بمقاسات مختلفة
•
نوع العينات: الطاقة: الضغط: ك 1300كن 1500 ،كن 2000 ،كن 3000 ،كن 5000 ،كن
•
الضغط في األجهزة عالية اإلستقرار: ك 2000كن 3000 ،كن 5000 ،كن
•
الثني في اإلطارات مغلقة ومفتوحة الجوانب:
•
ب 150كن 200 ،كن
توفر ماتيست إمكانية ربط وتوليف األجهزة للحصول على مجموعة من إطارين أو أكثر تعمل من خالل وحدة تحكم واحدة رخصة برنامج معامل مرونة الخرسانة بالضغط القاطع C125N
23
22
أجهزة إختبار المواد
مجموعة إختبار قمع الهبوط
خرسانة
C180 KIT
جهاز صقل العينات
EN 12350-2 / EN 12350-8:2011 / ASTM C143
C298
Matest offers different slump cone test sets, each one supplied with different accessories:
EN 12390-2 / ASTM D4543
• complete set for laboratory tests, with stainless steel cone
• complete set for laboratory tests, with galvanized steel cone
• portable set for on-site tests, with stainless steel cone
The machine is made of rugged plate and designed to grind and polish cubical and cylindrical specimens of concrete, blocks, natural stones, rocks, ceramic materials etc.
• portable set for on-site tests, with galvanized steel cone
The specimens are easily fixed to the table through the appropriate locking stirrups, allowing the machine to grind many specimens at the same time. Other model available: automatic grinding machine (code C299).
أجهزة حفر القلوب الخرسانية تعمل بالكهرباء أو الوقود البترولي
إختبارات على الخرسانة الطازجة ذاتية الدمك
C319-02
C172
EN 12697-27
EN 12350-8 / EN 12350-9 / EN 12350-10 / EN 12350-12 / ASTM C1621
Matest supplies a wide range of core drilling machines designed to drill cores of concrete or bitumen.
Matest manufactures a complete range of equipment for:
• f ree flow and time flow determination “Spray Test”
• flow time determination from a funnel “V-Funnel”
• confined flowability determination with “L-shape box”, “U-shape box” and “J-Ring apparatus”
Available models, supplied with diamond bits and accessories:
قوالب بالستيكية وحديدية
• lightweight and portable machines
These moulds are used to prepare concrete specimens: cubes, cylinders and beams.
Available in many different models made of hard plastic, steel or cast iron. All Matest moulds are strong and resistant to wear action, allowing the operator to use them many times.
• robust machines for road pavements
• drilling machine with vacuum facility
C223 ÷ C247
جهاز فيبي لإلستقرارية C183 EN 12350-3 / ASTM C1170-92 The equipment is used to determine the consistency and density (workability) of concrete rolled up and compacted by means of the vibrating table. Vebé consistometer is based on the same principle of the slump cone test method, but it offers the advantage of a mechanical action. Matest offers both EN and ASTM versions.
أحواض مائية لمعالجة العينات الخرسانية
طاوالت هزازة
C302 KIT
C278
EN 12390-2 / ASTM C31 / ASTM C192 / ASTM C511
EN 12390-2
Curing tanks made of heavy plastic or steel to cure concrete specimens.
These tables are made of rugged steel sheet and used to compact concrete specimens in laboratory.
هزاز (رجاج) بوكر
Different models are available: for laboratory use, portable, with control panel or with pedal switch.
EN 12390-2 / ASTM C31 / ASTM C192
لتر5 جهاز قياس الهواء المحتجز في الخرسانة سعة
Poker vibrators are conceived for the compaction of specimens both in laboratory and on building site.
C195
Capacity: 550, 650 or 1000 litres. Supplied with analog or digital thermostat.
C270
Models available:
24
• with electric motor
• with petrol engine
• battery operated
EN 12350-7 / ASTM C231 type A Made of cast aluminium alloy, it records directly the percentage of air included in a fresh mixed concrete. The equipment is supplied complete with pressure gauge, tamping rod, and hand operated pump.
25
أجهزة إختبار المواد
خرسانة
منتجات أخرى
مطرقة مرتدة لفحص الخرسانة مع سندان للمعايرة
قياسية ورقمية،المطارق المرتدة لفحص الخرسانة
Electro-Hydraulic loading and control system C109-09N
RAM, rapid analysis machine
C215
C307
Flat jacks, test on brickworks
C358-01
Resonance frequency meter
C393
Flow table for concrete, manual
C192 KIT
Rule right angle for moulds and specimens C250-10
C208
Servo-Strain, software for the automatic control of the machines to measure load/displacement/strain
C104-10N
Software for “Footmeter”calibration
C155-10N
Accessories for concrete compression/flexural machines
C097-01
Flow tables
Air entrainment meters for concrete
C195
Footmeter calibrators for testing machines C155N
Automatic servo-controlled system for pressure regulation
C104N PL
C365
C411
Hydro-Plus Evolution, semi-automatic console for testing machines control
C109-03N
C123-01N
C290-01
Impact failure test on tiles and paving materials
Software for compression test with H011-01N machine
C096
Software for elastic modulus on concrete
C125N
Joisel apparatus
C211
K-slump tester
C187
Software for flexural test on concrete
C109-11 C109-11N
Capping compound equipment for concrete specimens
Manufactured by Matest with selected components and accurate processing technique, Matest rebound test hammers are the top quality models available on the market, ensuring high precision and affordable results.
Capping compound filler
C290-06
Capping retainers for concrete testing machines
C107-09
The rebound hammers are used to perform non-destructive tests on concrete structures/buildings, providing an immediate information of concrete compressive strength as requested by the rebound method.
Carbonation test
C375-02
Cementometers
C214
Chloride field test system
C375-01
Available models:
Climatic controlled cabinet:-20°C + 60°C
Load cells, standard and high performance C140 Machine for compression test on concrete pipes 1000 kN
C093-05
C314
Machine for deflection test on fiber reinforced concrete beams
C090-07N
C185
Machine for flexural test on tiles
C095
• standard of 2,207 Joule
Compacting factor apparatus, BS
• standard of 2,207 Joule with calibration curve chart in psi
Compressometer/extensometer for concrete C133
• standard of 0.735 Joule
Compressometers for concrete
• digital with microprocessor
C250-16
Software for compression test on concrete C109-10 C109-10N
Canin: corrosion analysing instrument
MATEST OFFERS THE COMPLETE RANGE OF EQUIPMENT FOR NDT TESTS
Go-not go gauge Hydraulic shrinkage determination equipment
C098N
EN 12504:2 / ASTM C805
جهاز قياس سرعة النبضات الفوق صوتية
C129
Accelerated curing tank for concrete
Autotec, automatic control unit with two channels
C380 / C386N
مطرقة فحص رقمية
Abrasion tester Böhme
C130N
Corrosion determination in reinforcing bars, array meter C412-01
Machine for punching test on sprayed concrete specimen with measurement of energy absorption
C090-07N
Mechanical strain gauges
C360 KIT
Software for tensile splitting test on concrete C109-12 C109-12N Software Servonet for the remote control of the machine through PC C123 C123N Specimen cutting machine for concrete
C350
Specimen cutting machine for metal bars
C351
Specimen cutting machines for rocks
C348N
Tester/calibrator for testing machines, digital
C138N
Thermometer, infrared
C303-10
Thermometers, logging and printing
C303
Crack detection microscope
C399
Metal detectors, Profometers
C396/C397
Crack width gauges for concrete
C408
Curing room for concrete
C309-10
Micro-coring equipment for rocks and concrete
C377
Trimming/cut-off machine for cores
C377-05
Moisture meter Surveymaster
C374
Ultrasonic “cross-hole” system
C373-10
C162
Ultrasonic pulse velocity tester for concrete C369N Unit weight measurer, density of fresh concrete
C199
Unit weight measurers for concrete
C200
Vaporizer for rooms
C311-01
Walz consistometer
C188
Deflectometer with telescopic tubular displacement transducer
C405-10
Pan type mixers for concrete
Deflectometers swing-arm models
C405N
Penetrometer for concrete
C213
Demoulding oil
C265
Penetrometer, Kelly ball apparatus
C186
Penetrometer, pocket model for concrete
C194
Device for deflection on fiber reinforced concrete
C090-15
Plasticity meter
C190
Device for flexural/punching tests on clay blocks
C093-11
Plate bearing equipment: data acquisition/management system
C405-15N
Water impermeability apparatus for concrete C435
Manufactured by Matest with the latest technologies, the instrument measures the ultrasonic impulse speed during its passage through a material (provided the distance between the probes).
Device for punching test on sprayed concrete
Portable digital press
C094
Water permeability apparatus, automatic
C430
C090-14
Portable electric generator
C332
Water test set for concrete mixing water
C220 C375-10 KIT
The tester has a colour and touch screen display (1/4 VGA), Windows CE operating system, Compact Flash interface, SD card, USB, RS 232 and RS 485 ports.
Diamond bits for concrete and bitumen
C340-05
Pressure transducers for cement and concrete testing machines
Water/air permeability of concrete C116-01N
Windsor probe
C410
Diamond blades
C350-12
Profoscope
C403-01
Workability meter for concrete
C189
Matest ultrasonic pulse velocity tester offers the possibility to visualize the shape of the transmitting wave while it goes through the material under test, transforming the instrument into a real oscilloscope with the “Scope” mode.
Digitec, semi-automatic control unit with two channels
Pull-Out, Pull-Off
C376N
Pumping units
C113/C114
C372N EN 12504:4 / ASTM C597
Device for splitting tensile test on concrete C100
C108N
It also offers the possibility to perform combined “ultrasonic and rebound” test in accordance to the Sonreb method.
26
27
أجهزة إختبار المواد
تنتج ماتيست أوسع نطاق من أجهزة إختبار الضغط واإلنثناء لإلسمنت والعجائن اإلسمنتية والصخور والطوب المتفقة مع المواصفات القياسية EN, ASTM, AASHTO, BS, NF, UNI, DIN, UNE العالمية
:تعمل بـ •
ًيدوياً أو آليا :نظام القياس
•
عداد (ساعة قياس) مفرد
•
عداد (ساعة قياس) مزدوج
•
وحدة تحكم ذات قناتين
•
قنوات8 وحدة تحكم تعمل باللمس ذات
•
عينات منشورية أو أجزاء منها وإسطوانات بمقاسات مختلفة،مكعبات
•
ط:الضغط كن500 ، كن300، كن250ك
•
:الضغط واإلنثناء في األجهزة ثنائية نطاق القياس كن250/15 ، كن500/15 ، كن300/50ن
•
:الضغط واإلنثناء مع نطاقين مستقلين للقياس وحجرة ثنائية لإلختبار كن250/15
:نوع العينات
إسمنت
:الطاقة
فيكاترونيك جهاز فيكات األوتوماتيكي E044N EN 196-3:2005 / EN 13279-2 (gypsum) / EN 480-2 / ASTM C187 / ASTM C191 Matest has designed and produced Vicatronic, the most used Vicat apparatus in the world. Vicatronic is manufactured by Matest with “anticorrosion and tropicalized” components. It is used for the determination of the initial and final setting time of cements or mortar pastes.
توفر ماتيست إمكانية ربط وتوليف األجهزة للحصول على مجموعة من إطارين أو أكثر تعمل من خالل وحدة تحكم واحدة
The complete test is performed automatically and gives very precise and repeatable results. Test data are printed on the incorporated printer, thus removing the manual operations of installing and zeroing the paper graph on the drum.
رخصة برنامج معامل مرونة اإلسمنت E190N والعجائن اإلسمنتية بالضغط
Other models available: manual version (code E055N) and with accessories for test on gypsum.
تفاصيل خالط العجينة اإلسمنتية
خالط العجينة اإلسمنتية األوتوماتيكي القابل للبرمجة E092N KIT EN 196-1 / EN 196-3:2005 / EN 413-2 / EN 459-2 / EN 480-1 / ASTM C305 Automatic, programmable, and computerized mortar mixer “high performance”. Suitable for intensive laboratory use, this model allows the operator to set different automatic mixing cycles in accordance to the procedures described by the afore-mentioned International Standards. The operator can set up to 5 automatic and customized mixing cycles through the PC.
28
29
أجهزة إختبار المواد
حجم كبير،كابينة معالجة E138 EN 196-1 This cabinet is suitable for curing large quantities of mortar, cement and concrete specimens at controlled humidity and temperature. It is made of aluminium and policarbonate, and supplied with 4 shelves and digital thermoregulator.
طاوالت التدفق
Matest also offers a wide range of water baths of different capacities for mortar specimens curing and general laboratory purposes.
E090-01 KIT
إسمنت
EN 459-2 / EN 1015-3 / ASTM C230 Used to determine the workability of mortar and lime. Supplied with cone mould - made of bronze - and tamper. Available models: hand operated or motorized with digital drop counter.
جهاز بلين إلختراقية الهواء قياسي وإلكتروني E009 KIT EN 196-6 Used to determine the fineness of Portland cement. Available models:
جهاز القلع E142
• standard
E009 KIT
• electronic
E011
• electronic and automatic E011-01
Digital bond strength tester, 16 kN capacity
حهاز الهز (الرج)ج E130 EN 196-1 The equipment is conceived to compact mortar prisms of 40x40x160 mm contained into a three gang mould. It is supplied complete with separate control panel including start/stop buttons and with automatic digital drop counter.
EN 1542 / EN 1348 / EN 1015-12 / EN 13687-2 / EN 13963 / EN 14496 The dynamometer measures the adhesive force and the tensile strength of two layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.) being particularly recommended for the maintenance of concrete surfaces. The equipment is compact, light, easy to handle, and can be used in any place and position. Pull-off is supplied with load cell and high resolution digital display. Other model available: Pull-off tester 0-5 kN capacity (code E142-01).
منتجات أخرى
Other model available: jolting apparatus “high performance” (code E131).
Accessories for cement/mortar flexural machines
E172-01
Determination of restrained expansion of concrete/mortar
Reference sand for mortar
E097-01N
E114
Sand content of drilling muds
E037-10
Dewar flask
E062-01
Setting time determination of gypsum
E044-40N E035
Accessories for compression/flexural machines
E170 / E172-01
E102
Dropping ball apparatus
E031
Air content in mortar: measurers
E029
Filter press for muds
E037-05
Slaking vessel for building lime/yield, EN 459-2
EN 196-1
Air content meters for mortar
E027
Fineness of fly ash by wet sieving
E017
Software for compression test on mortar
E163 / E163N
Flow cone apparatus
E038
Software for elastic modulus on mortar
E190N
Funnel groove for grouts, UNI 8997
E059
Software for flexural test on mortar
E164 / E164N
Gillmore apparatus
E058
Steam bath for soundness of building lime E081-10
Le Chatelier flask
E014
Stiffening time determination of concrete
E083-10
Vibrating machine for mortar cubes
E132
قالب من ثالث خانات
Apparatus for lime testing reactivity, EN 459-2
Mould for 40,1x40x160 mm specimens. Made of steel with “hardness of inside walls over HV 200”.
E034
All surfaces are grinded and all parts are marked with an identification number for a correct assembling.
Apparatus for settling and swelling ratio of grouts
E036 KIT
A part-number is engraved on each mould and a Certificate of Conformity is supplied along with.
Autoclave for soundness test
E070
Bar container for potential alkali reactivity determination
E067-05
Baroid mud balance
E037-01
Bulk cement sampler
E020
Bulk density of cement
E025
Bulk density of lime
E091
Calcimeter, Dietrich-Frühling
A105
Calorimeter for cement
E061N
Calorimeter, Langavant
E062-10
Determination of free expansion in plastic period
E060
قوالب ليشاتليه قياسية وموثقة
حمام ليشاتليه المائي مع قالب E064 with E065 EN 196-3 The equipment is used to determine the soundness of cement specimens both in boiling and cold water. The inside chamber of the water bath is made of stainless steel and bring the Le Chatelier moulds to the boiling point when immersed in water.
Length comparator for linear variations of mortar specimens
E077 KIT
Water baths for cement curing
E136 / E139
Marsh funnel viscometer
E037
Water flowing sieves device
E016
Mixers for mortar
E093 / E095
Water refrigerator
E141
Mould NF for craking test
E067
Water retention apparatus for cement
E039N
Moulds for mortar specimens
E102 / E112
Workability apparatus for mortar
E081
Moulds for soundness and shrinkage tests E072 / E113 Pat Test
E082
Penetrometer for mortar, Italcementi model E050 Plaster extensometer for gypsum
E080
Plunger penetration apparatus for masonry cement/building limes
E083
The moulds are made of brass with chromed finishing. Other models available: with bigger size pointers and “individually tested”.
30
31
أجهزة إختبار المواد
جهاز اإلختبارات العامة الهيدروليكي كن600 ذو التحكم السيرفي طاقة H003N Servo-controlled machine with digital TOUCH SCREEN system to perform static tensile tests on metals. EN 10002 / EN ISO 6892 / EN ISO 7500-1 / ASTM A370
حــــديد
The machine is designed to perform both tensile tests using the grips placed in the clamping heads, and also flexural, compression, bending, hardness, dishing and other tests in the upper part of the frame - between the head and the traverse - in accordance to the International Standards.
جهاز عام إلختبارات الشد والضغط H011-01N EN 10002 / EN ISO 6892 / EN ISO 7500-1 / ASTM C39 / ASTM E4
The hydraulic servo-controlled unit regulates the load rate through the computer.
Servo-controlled testing machine with TOUCH SCREEN control unit. This machine has a compact design and is used to perform tensile tests on steel reinforced round bars with a diameter from 6 to 25 mm, and flat bars with max. dimensions of 25x15 mm (max. capacity: 500 kN). It can also carry out compression tests on concrete cubes with max. side of 150 mm, and cylinders with max. diameter of 160x320 mm (max. capacity: 1500 kN). An hydraulic selector allows the operator to select the tensile or the compression test. The four columns loading frame is overdimensioned to provide high rigidity and stability.
مقياس إستطالة لجدائل األسالك
مقياس إستطالة إلكتروني الختبار قوة التشوه اإلستطالي حتى الكسر مقابض للعينات المسطحة والمستديرة
منتجات أخرى
Accessories for compression test on metals H003-13 Accessories for flexural test on concrete
H003-22
Accessories for flexural test on metals
H003-11
Accessories for test on electro welded wire nets
H003-14
Accessories for compression test on concrete
H003-21
Bending test on metals
H003-12
Broaching machine
H057
Charpy pendulum tester for resilience tests H060
جهاز فحص الثني البارد H065N EN ISO 7438 / EN 10080 / EN ISO 15630-1 / ASTM A615 / ASTM A615M The machine has been designed to perform bending tests on steel bars for reinforced concrete.
Cooling bath for resilience tests
H052
Cutting machine for specimens
C351
Dry-ice maker
H050
Extensometer for load/deformation
H014
Extensometer, wire strands
H003-18
Machine for tensile tests on metals, plastic materials, wires, textiles
S205-05
Machine, hydraulic and servo-controlled, for static tensile test on steel 600 kN
H002N
Machines for tensile test on steel and compression test on concrete, 500/1500 kN
H010 / H011-01N
Machines, servo-controlled and electromechanical, for tests on steel 10/600 kN
H004 / H008
Marking-off machine
H020
Software for tensile test on metals, plastic materials, wires, textiles
H016
Software for tensile test on steel
H009N
It accepts bars with diameter up to 40 mm and it is supplied with two series of rollers, having respectively a diameter of 50 and 100 mm. Different models of mandrels, mandrel-holders and brackets are available and have to be ordered separately.
32
33
أجهزة إختبار المواد
جهاز الدمك اأوتوماتيكي للسي بي آر والبروكتور
وحدة قياس التماسك ذات التحميل األمامي
S199
S260
EN 13286-47 / ASTM D698 / ASTM D1557 / ASTM D1883
ASTM D2435 / ASTM D3877 / ASTM D4546 / BS 1377:5
Designed to compact Proctor and CBR specimens, it provides an extremely uniform compaction degree, granting reliable and repeatable test results.
The oedometer is conceived for consolidation test on soil specimen which is axially loaded and laterally contained. The machine determines the settlement characteristic of the specimen in a given period of time.
The software allows to select and perform automatically different compaction cycles in accordance to the International Standards (EN, ASTM, AASHTO, NF, DIN, UNE, CNR, BS). The operator can select and memorize up to 10 customized test cycles. Different models of moulds and rammers are available, in accordance to the Standards.
تــــــربة
Available models:
• front loading oedometer with dial gauge or digital data acquisition system (code S260)
• Edotronic, automatic and pneumatic consolidation apparatus (code S262)
إطار إختبار الضغط الرقمي العام المتعدد السرعات S216 KIT EN / ASTM / BS / NF Matest manufacturers a wide range of machines for CBR, Marshall, Unconfined and Tensile splitting tests on soil specimens. Available models:
إكسسوارات لوحدة قياس التماسك
• CBR machines: manual, motorized 50 kN or digital computerized 50 kN capacity
• dual speed CBR/Marshall load frame 50 kN or dual speed CBR/Marshall digital computerized load frame 50 kN
المترسب/جهاز إختبار القص المباشر S277 KIT ASTM D3080 / BS 1377:7
• universal multispeed load frame 50 kN or multispeed digital computerized load frame 50 kN
The apparatus establishes the resistance to shearing of all types of soil specimens: consolidated - both drained and undrained – undisturbed, or remoulded samples.
Most of them can be managed through the digital control unit Cyber-Plus 8 Evolution (code B044N-SET).
Matest offers 3 different models:
The values are measured by a load ring with dial gauge or by a digital control unit with electric load cell and linear displacement transducers.
كن50 يونيترونيك S205 Universal multipurpose frame for: • compression/flexural tests, 50 kN max. capacity • tensile tests, 25 kN max. capacity on different kind of materials with automatic load or displacement/deformation control (asphalt, concrete, cement, mortar, soil, rocks, clay blocks, metals, plastic materials, wires). Other model available: “Multi-Tester” 200 kN (code S206).
كن50 إطار الضغط الثالثي الرقمي S301 BS 1377:6 / BS 1377:7 / BS 1377:8 / ASTM D2850 / ASTM D4767 Ruggedly manufactured, the triaxial load frame has been designed for geotechnical laboratory purposes and for the execution of the following tests:
• standard version
• digital version with incorporated data acquisition system
• digital version with incorporated data acquisition system, fully automatic functioning
إكسسوارات جهاز إختبار القص
نظام جمع ومعالجة المعلومات األتوماتيكي لإلختبارات الجيوتقنية These systems can be used both with Matest testing machines (oedometers, CBR/Marshall machines, triaxial machine, shear test apparatus etc.), and with equipments manufactured by other firms, subject to mechanical adjustments.
• “UU” unconsolidated undrained test
بشاشة تعمل باللمس، قنوات8 بلس المطورة ذات-وحدة سايبر
• “CU” consolidated undrained test
• “CD” consolidated drained test
S335N
The machine accepts every type of standard triaxial cell up to 100 mm diameter by 200 mm height.
8 channels data acquisition and processing system with full colour touch screen display. The unit can be connected to the PC through the USB port and it prints the test certificate. Equipped with slots for external memory supports (pendrive or SD Card). Unlimited memory.
قناة تناظرية64 القابلة للتوسع إلى، قناة16 وحدة داتاترونيك ذات S336 34
35
أجهزة إختبار المواد
تــــــربة
كن500 ، كن200 ، كن100 أجهزة التحمل اللوحي القياسية والرقمية
مجموعة إختبار المكافئ الرملي
S224-01 KIT
S158-20 KIT
ASTM D1194 / ASTM D1195 / ASTM D1196 / BS 1377:9
EN 933-8 / ASTM D2419
The bearing plate is used for the determination of the bearing capacity and deformation modulus of soils on road constructions, foundations, road subgrades, airport and highway pavements. Different models are available, each one equipped with different accessories in accordance to the International Standards:
The complete set is used to calculate the percentage of fine elements (powder, clay, silt) into aggregates. Different models are available: • complete set or simple set in accordance to EN, NF, CNR, UNI and UNE Standards • complete set or basic set in accordance to ASTM and AASHTO Standards
• plate bearing equipment 100 kN with 1 dial gauge, with 3 dial gauges or with 3 transducers and Cyber-Plus Evolution data acquisition and processing system
• plate bearing equipment 200 kN with 3 dial gauges or with 3 transducers and Cyber-Plus Evolution data acquisition and processing system
• plate bearing equipment 500 kN with 3 dial gauges or with 3 transducers and Cyber-Plus Evolution data acquisition and processing system
أدوات اإلختراقية والقص بطريقة فين الحقلية والجيبية
أداة قمع الكثافة الرملية
S050
S234 KIT
Penetrometers:
• lightweight dynamic model or DCP (dynamic cone penetrometer)
• dial pocket models, range 0-6 kgf/cm2 or 1-14 kgf/cm2
• pocket models, range 0-4,5 kgf/cm2 or 0-16 kgf/cm2
EN 933-8 / ASTM D2419
• geopocket dial penetrometer
Three models are available:
• proving ring penetrometer
• hand operated with handle
• Proctor penetrometer
• automatic and motorized
Shear vanes:
• automatic and motorized with steel security cabinet
• field inspection pocket vane tester
• pocket models, range 0-1 kg/cm2 or 0-2 kg/cm2
هزازات المكافئ الرملي الميكانيكية S160-01N
Different models are available, depending on cone diameter: 6,5’’, 12’’, 100 mm, 150 mm and 200 mm (in accordance to ASTM, AASHTO, CNR, UNE, NF and BS Standards).
طريقة كازجراندي:حد السائل
منتجات أخرى
S170 ASTM D4318 / NF P94-051
تحليل مقاس جسيمات التربة
The equipment establishes when a clay soil changes from a plastic to a liquid state. Two models are available:
S155 KIT
This kit is used to determine the quantitative size distribution of very fine particles in soils such as clay and silt.
• h and operated with left side or right side crank (the base could be made of bakelite or hard rubber)
•m otor operated through an electric motor that lifts the cup at 120 drops/min (the base could be made of bakelite or hard rubber)
Two models are available:
• complete set for Hydrometer method (ASTM, AASHTO, UNE)
• complete set for Pipette method (BS 1377:2)
مجموعة إختبار الميثيلين األزرق S157 KIT EN 933-9 The set is used to determine the quantity of clay in fine portions of aggregates. Matest also offers the automatic model (code S157-20) that grants accurate and repeatable test results, saving time (approx. 30 minutes for each test).
36
The apparatus determines the in-situ density of fine-grained compacted soil.
Air compressors for laboratory S351 / V206 Air/water interface pressure system S350 Andreasen pipette S144 Augers, hand operated and motorized S092 KIT / S097 Balloon density apparatus S230 KIT / S237 Boxes for shear test S282 Calibration process for transducers/load cells S337-51 Calibration unit for dial gauges/extensometers S390 CBR machine, hand operated, field model S210 KIT CBR moulds and equipments S200-01 Classification test for constituents of coarse recycled aggregate S156-20 Colour standard chart for organic impurities in soils S132 Consolidation cells S268 Consolidation frame for oedometer S290 Consolidation frame for triaxial test S359 Conversion frame for CBR S221 De-airing tank for triaxial test S355 Die cutting soil sampler S118 Differential mercury manometer, triaxial S356 Displacement transducers for geotechnical tests S336-11 Double burette volume change apparatus S358 Dynamic plate load test S229 Earth resistivity meter S077 Electric strain gauge load cells S337-31 Extruder for Marshall, CBR, Proctor moulds S114 Extruders for soil samples S111 / S114
Field CBR test set Geogauge, non nuclear gauge Hollow punches and tampers Hollow punches and tampers for shear tests Indicators, dial or digital Ion exchange device Linear shrinkage BS Load proving rings Mackintosh prospecting kit Moisture condition value determination Moulds for soil/cement Nuclear moisture density gauge Null Indicator, triaxial Organic matter test set Penetrometers for soil Permeability attachment for oedometers Permeameter for soils Permeameter stand for soil Pinhole test equipment Pressure measuring devices for triaxial test Pressure transducers for geotechnical tests Proctor moulds and tampers Pyknometer for soils Samplers, surface soil Sand absorption cone and tamper Scraper for soil Screw pump for triaxial test
S220 KIT S059 S122 S122-08 S375 S140 S176 S370-01 S370-01S S051-01 S088-10 S195-01 S060 / S060-01 S353 S138 S165 KIT S166 KIT S275 S252 S248 S244 S340 S336-50 S185 / S187 S147 S053 / S084 KIT S148 S240-01 S345
Seismograph S079 Slotted weights for oedometers and shear test S273 KIT Software for CBR test S218 / S218N Software for plate bearing test S224-21 Software for tensile test on mortar briquettes S205-08 Software for unconfined test on soil S218-01 S218-01N Software lab oedometer S262-12 Software lab shear test S277-41 Software lab triaxial test S335-11 Software report for direct/residual shear test S277-40 Software report for triaxial test S335-10 Software report oedometer S260-05 Soil colour chart S133N Soil lathe S120 Stirrer, high speed S156-01 KIT Submersible load cells S337-02 Triaxial cells S305 Trimming knife S125 Vibrating compaction hammer S197 Vibrating table for relative density of cohesionless soils S238 KIT Volume gauge for triaxial test S338 Water level indicators S061 Water, hardness test kit S137 Water, kit for acidity, chloride and hardness test S135 Water/pressure distribution unit for triaxial test S348 Wire saw S124
37
أجهزة إختبار المواد
موازين mechanical models, rotary automatic scales, batching scales, moisture determination balances, zero-centering balances, and digital models (from 210 g to 300 kg). Most of the models are fitted with under balance weighting facility for specific gravity tests and RS 232 port.
منتجات وحاويات معدنية
أجهزة عامة
• mixing bowls
• tins
• sample containers with air tight lid
• pans
• round and flat scoops made of aluminium or steel
• flexible and rigid spatulas
منتجات بورسالينية
منتجات بالستيكية • graduated decanters • beakers • wash bottles • bottles • funnels • boxes and sample bags
موازين حرارة
زجاجيات مخبرية
• dial • with glass stem • armoured • digital • with microprocessor • infrared
• measuring cylinders and beakers
• mortars with pestle
• evaporating dishes
• crucibles
• Buchner funnel
منتجات أخرى
• Erlenmeyer conical flasks, volumetric flasks with and without stopper, filter flasks
Aspirator pump
V202
Ladle
V186-01
Stop watch
V170
• graduated bottles
Balances, electronic and analytical
V065-02
Mallet, made of rubber
V195
Thermohygrograph
V168
Bristles
V179
Mallet, made of steel
V194
Thermo-hygrometer
V165
Brushes
V178
Marking pencils for glass
V147-01
Timing device
V171
Bucket, made of plastic
V128
Metal stands
V219
Tongs for crucible
V174
Burner, Bunsen
V173 KIT
Mortar and pestle, made of stainless steel V112-05
Burner, butane
V201-01
Pestle, rubber heated
Chattaway spatula
V192-08
Chemicals
V300-05
Conductivity meter, thermometer
• pyknometers, Gay-Lussac and Hubbard-Carmick specific gravity bottles • weighting bottles, glass funnels, graduated pipettes, bended or right graduated burettes, desiccators
Tool kit
V222
V113
Trolley for laboratory
V224
Petri dish
V123
Trowels
V187
PH meter
V215
Tubes, made of rubber
V230
V166-01
Pick mattock, density pick
V197
Vacuum pumps
V203
Crucible, made of platinum
V117-04
Pipettes of Mohr
V142
Vernier caliper
V175
Density baskets for specific gravity frame
V041
Rain gauge
V167
Voltage stabilizer
V208-10
Density chisel
V198
Rule, folding
V176
Watch glass
V115
Dropping bottle
V124
Rule, made of stainless steel
V176-01
Water stills
V211
Filter paper Whatman
V218-01
Sand bath
V241
Weather station
V148
Funnels, made of plastic
V135
V036
V177
V220 V220-01
Weights for balances
Gloves
Screw clamps, Hoffman and Mohr
Wheelbarrow
V226
Hair hygrometer
V169
Shovel
V196
Wire gauze with ceramic centre
V173-03
Hammer, made of steel
V193
Sleeves
V220-02
Hand anemometer cup
V148-01
Specific gravity frame
V085
V172
Spoon for sampling
V186
Hydrometers for soil
38
39
LAT No 214 Signatory of EA, IAF and ILAC Mutual Recognition Agreement The content of this brochure refers to products/ activities not accredited by ACCREDIA
MATEST S.p.A. Unipersonale Via delle Industrie, 25 24048 Treviolo (Bg) • Italy T. +39 035 2055011 • F. +39 035 2055055 info@matest.com - www.matest.com 40