MM550
20 2 2 U PDATE S
Moving with the times, for 2022 we have decided to continue using our 2020 carbon balanced brochures to avoid any waste of paper materials. There are a few changes to make you aware of, listed in this mailer for your ease.
MM061 PRINTME ECO POLAR BEAR NEW 2022
SEE THE FULL RANGE OF MM060 PRINTME STYLES, MADE WITH A FLATTER FUR PILE ON THE TUMMY FOR DIRECT VINYL AND SUBLIMATION PRINTING.
HIGHLAND COW NEW 2022
STEP 1
CHOOSE YOUR PRINTME ANIMAL FROM THE COLLECTION
STEP 2
VINYL OR SUBLIMATE ME PLATE ME UP
SUBLIMATE ME 1. SUBLIMATION works on all of the MM060 PRINTME styles. 2. Once the design has been printed, tear around the edges of the sublimation paper to avoid impressions being made on the fur. 3. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening. 4. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat. 5. Remove the protection and peel off the sublimation paper.
PINK TEDDY
BLUE TEDDY
SLOTH
REINDEER
NEW 2022
NEW 2022
KOALA
KANGAROO
NEW 2022
NEW 2022
STEP 3 ENJOY
VINYL PRINT ME 1. VINYL works on all of the MM060 PRINTME styles, a vinyl with a thicker adhesive e.g a flock or glitter has the best results.
LAMB
NEW 2021
NEW 2021
PENGUIN
ELEPHANT
CAT
WHITE TEDDY
WHITE BUNNY
GIRAFFE
LION
UNICORN
NEW 2022
NEW 2022
TEDDY
RAINBOW BEAR NEW 2021
NEW 2021
GREY BUNNY
OWL
NEW 2021
2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening. 3. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat. 4. Peel off the vinyl backing and return the protection paper before re-pressing for a further 15 seconds to seal the design.
*Above are suggested methods of decorating, requirements may vary depending on the model and type of equipment you are using.
NEW 2021
NEW 2021
MM574 NEW 2022
MM575 NEW 2022
MM572 NEW 2022
MM576 NEW 2022
MM573 NEW 2021
SEE THE FULL RANGE OF ZIPPIE STYLES, MADE WITH A ZIP AROUND THE TOY BASE AND REMOVABLE STUFFING FOR DIRECT DECORATION.
STEP 2
MM050 WHITE
STEP 1
UNZIP AND REMOVE THE STUFFING FROM YOUR ZIPPIE
EMBROIDER ME FRAME ME UP
EMBROIDER ME 1. EMBROIDERY works on all Zippies with a professional finish. 2. Frame size 15-18cm will fit most of our Zippies. Square or circular will suit.
SUBLIMATE OR VINYL PRINT ME PLATE ME UP
MM050 GREY
MM051
MM052
STEP 3
RETURN THE INNER STUFFING AND ZIP ME BACK UP
PRINT ME
MM053
MM550 NEW 2021
MM054
MM555
MM556 WHITE
1. SUBLIMATION works on all Zippies with a light coloured tummy. 2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.
3. Use a sheet of backing underneath the animal to stabalise the fur.
3. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat.
4. Use a sheet of aquafilm on top of the animal to let your stitches stay proud and not sink into the fur.
1. VINYL works on all Zippies, a vinyl with a thicker adhesive e.g a flock or glitter has the best results.
5. Make sure your Zippie is positioned straight, a laser needle will help. Alternatively, mark up a peice of a tape with a + to line up and remove before sewing.
2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.
MM556 PINK
MM556 BLUE
MM558
MM561
MM564
MM563
MM559
MM560
3. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat.
*Above are suggested methods of decorating, requirements may vary depending on the model and type of equipment you are using.
MM567
MM568
MM569
MM565
MM570
MM566
MM571
NEW 2021/2022 SIZE GUIDE
NEW 2022 Animal Blanket
PRINTME MINI CAT HEIGHT
M 30
NEW 2022
MM572
ZIPPIE SLOTH HEIGHT
L 42
NEW 2021
PRINTME MINI PENGUIN HEIGHT
M 24
NEW 2021
MM573
MM751
ZIPPIE CHRISTMAS BEAR HEIGHT
L 35
NEW 2021
PRINTME MINI RAINBOW BEAR HEIGHT
M 28
NEW 2022
MM574
One Size / L
ZIPPIE KOALA BEAR HEIGHT
L 43
NEW 2021
PRINTME MINI REINDEER HEIGHT
M 32
NEW 2022
MM575
ZIPPIE KANGAROO HEIGHT
L 38
NEW 2021
PRINTME MINI TEDDY HEIGHT
M 30
NEW 2022
MM576
ZIPPIE LAMB HEIGHT
L 42
NEW 2021
PRINTME MINI WHITE TEDDY HEIGHT
M 30
NEW 2022
MM751
ANIMAL BLANKET HEIGHT WIDTH
L 77 77
NEW 2022
PRINTME MINI PINK TEDDY HEIGHT
M 23
NEW 2022
PRINTME MINI BLUE TEDDY HEIGHT
M 23
NEW 2022
PRINTME MINI HIGHLAND COW HEIGHT
M 23
NEW 2022
PRINTME MINI KOALA BEAR HEIGHT
M 26
NEW 2022
PRINTME MINI KANGAROO HEIGHT
M 23
NEW 2022
PRINTME MINI LAMB HEIGHT
M 23
NEW 2022
PRINTME MINI SLOTH HEIGHT
M 23
NEW 2021
MM060
All sizes measured in cm.
77x77cm
MM565/MM060
MM574/MM060/MM575/MM060
MM061
NEW 2022
MM061
PRINTME MINI ECO POLAR BEAR HEIGHT
M 2
NEW 2021
MM550
GIANT ZIPPIE BUNNY
XL 65
MM574/MM060/MM575/MM060
All styles comply to EN71 Toy Saftey regulations and present CE markings on all labels, this means that the toys undergo rigerous testing to ensure that the products are safe for the use of children and free from choking hazards- all Printme’s and Zippies are sutiable for all ages. These test results can be shared on request.
DISCONTINUED STYLES: MM011 MM090 MM557 MM562
DISCONTINUED COLOURS: MM003: BABY BLUE & BABY PINK
Scan h ere to v i ew o ur 20 22 M um b l e s re s o u rc e s .