SURFACE MINER
THE CATALYST FOR ENHANCED PRODUCTIVITY FROM
PUZZOLANA SURFACE MINER PMM2205 Surface Miners have proved the skeptics wrong by working successfully and economically in the very difficult Indian Mining Conditions. Surface Miners have, for sure, saved on cost and wherever they have worked, they have produced desired quality of product by allowing selective mining and more precise mixing of different grades. A high percentage of overall extraction is achieved too because of the precise nature of cutting of coal/minerals. Surface Miners help achieve good control of the product size . Also, mining leaves behind very well leveled benches saving huge costs and effort involved road and bench maintenance and handling costs. In a nutshell, Puzzolana Surface Miners will directly produce – 75mm product direct from in-situ coal surface without drilling and blasting.
MAIN FRAME
Ruggedly built sturdy box frame integrated with side plates and lifting jack cylinder to withstand extreme shock loads . Four track steering is provided for efficient steering and control. Height adjustment is electro-hydraulic for achieving fine setting. Under Carriage & Tracks
The under-carriage & track assemblies provided are heavy duty type with wider footprint to provide extra tractive effort needed to ensure effortless movement while cutting to the set depth and provide optimized ground pressure for working in soft ground conditions. This ensures greater depth of cut and the rated production and required productivity from the overall system. Cutting/milling drum
Very robust drum type roll design, wear resistant set with up-milling configuration to achieve uniform depth of cut and near 85-87% -75mm product sizing. The drum is driven by Poly V-belt drive with automatic constant belt tensioning system.
SURFACE MINER Technical Specifications Milling Drum: Cutting Width
2375 mm
Max. Depth of Cut
350 mm
Drum Diameter
1140 mm
Make
Cummins
Model
QSK 23
Engine:
Cooling
Water Cooled
Cylinders
6 inline
Power Rating
950 Hp @ 1800 RPM
Max Engine RPM
1800 RPM
Displacement
23 L
Compression Ratio
16:01
Aspiration
Turbo Charged and Charge Air Cooled
Fuel Consumption, Full Load
162 L/Hr
Fuel Consumption 2/3 Load
108 L/Hr
Emission Standards
EPA Tier II
Electrical System
24 V
Hydraulics: Pump Drive
Stiebel 4 Output
Pumps
Bosch Rexroth-Axial Piston pumps
Tank Capacities: Fuel Tank
1500 L
Hydraulic Oil
1500 L
Water Tank
5000 L
Driving Characteristics: Travel Speed
0-85 m/min
Under Carriage: Track (L x B x H)( 2 Front & 2 Rear)
2800 x 430 x 870 mm
Gradeability
85%
Shipping Dimensions: Main Body
11000 x 3300 x 3700 mm
Secondary Conveyor
9000 x 1500 x 1800 mm
Weight: Total Machine Dry Weight
62300 Kg
Total Machine with Full Tanks Weight
70750 Kg
Minimum Turning Radius: Inner Milling Radius
2900 mm Optional
Conveyor System: Belt Width ( Primary & Secondary Conveyors)
1100 mm
Theoretical Discharge Capacity
750 Cubic Meters per Hour*
4050
55
째
Optional :
3600
2600 9450
4050
55
째
11150 18500
*Conditions apply. PMF Engineering Ltd. reserves the right to change specifications without notice.
Engine
Turbo-charged/charge air cooled powerful electronic control engine from Cummins with worldwide support is provided to ensure higher power delivery to the cutting point. The engine chamber is sound-proofed to keep noise level under allowable limits. Air intake through turbo-separator/air-pre cleaner arrangement to ensure long engine life is provided. Advanced cooling system with temperature sensing radiator fan to utilize optimum power for cooling is provided. CUMMINS QSK23
Machine Control
A fine and positive control with dual joystick is provided. Continuous by variable machine speed over the operating range is achieved with both low and high speed selection. Steering modes are selectable through joy stick operation. Hydraulic traction control through flow divider with on / off arrangement together with continuous electronic milling / cut depth indicator using level and grade sensors are provided. Dust suppression system
PMM2205 and PMM2205WR models are equipped with dust suppression system for milling drum as well as conveyor using spray system. Conveying system
Continuously variable speed 1100 mm wide dual stage conveyor with 55 Âş slewing angle on either side is provided. Operator's Cabin
Ergonomic design with following features for safe & comfortable Operation: Anti vibration mounted sound proof operator's cabin platform. Ergonomically placed joysticks, control panels and other display units. Engine CAN-BUS and total hydraulic controls integrated with BODAS. Additional screen for camera display. Air conditioned cabin. Additional analog pressure and temperature gauge test points are provided on the rear of the cabin. Emergency exit from the rear of the cabin. Space for tool kit and other consumables. MOBA - level sensing system provided on the machine for continuous monitoring and controlling of the level / depth of cut, grade and slope of the machine. Optional-AUTO mode through the use of GPS navigation. Integrated operator protection system for crash protection. Lighting
10 high beam white spot lights powered with hydraulically run alternator onboard. Safety
6 emergency stop buttons strategically located for safe operation are provided. Optional equipment
Milling drum housing for cutting width from 2.2 to 3.8 M drum Model PMM2205WR available for Windrowing application with 2.2 M drum. AUTO mode with GPS navigation. Online tracking system using GPS / GPRS. Carbide tools for different applications.
PMF ENGINEERING LTD. nd
2 Floor, IVRCL Towers, Avenue-4, Street No.1 Old Road No.10, Banjara Hills, Hyderabad – 34. A.P., India. Ph: +91 40 23354573, +91 40 23354514/15, Fax: +91 40 23354574. E-mail: puzzolanam@puzzolana.net Web: www.puzzolana.net