HANDLELESS RAIL SYSTEMS BRUSHED BRASS & BRUSHED COPPER FINISHES
BRUSHED COPPER METALLIC RAILS & ACCESSORIES Building on the popularity of our true handleless kitchen styles, we have introduced 2 brand new, on-trend finishes. Brushed copper and brushed brass have been added to our rail portfolio, to complement the colour and finish opportunities within our Porter, Tomba and Unity made-to-measure ranges. PLEASE NOTE Whilst we have worked diligently to ensure the simplicity of the rail system remains in-line with our current offer, there are some slight variations in both product offering and technical details. These have been highlighted in this document.
10
9
13
2 4
1
3
6 5 8
7
11
12
BRUSHED BRASS METALLIC RAILS & ACCESSORIES
10
Brushed Copper
Dove Grey
Brushed Brass
Hartforth Blue
9
13
2 4
1
3
6 5 8
7
11
01
Order Online www.pws.co.uk
12
PRODUCT RANGE - Overview KEY FOR AVAILABLE FINISHES
Brushed Copper (BHC) Brushed Brass (BHB)
Top profile for base doors, 4100x56.5x27mm
2
Top profile,internal corner joint 90o, 57x29x29mm
3
Top profile, external corner joint 90o, 57x27x27mm
4
End caps for top profile, pair (L/R), 56.6x26x26mm
BASE UNITS Top rail
1
CODE GPT4100BHC GPT4100BHB
Mid profile for drawers, 4100x72x27mm
6
BASE UNITS Mid rail
5
CODE GPTIN90BHC GPTIN90BHB
Shown fitted
CODE GPM4100BHC GPM4100BHB
9 APPLIANCE/ LARDER UNITS
Mid profile, internal corner joint 90o, 72x27x5mm
Vertical profile (intermediate), 3000x63x33mm (cut-to-size)
CODE GPV3000MIDBHC GPV3000MIDBHB
Metallic plinth, 3000x150x11mm (Supplied with plinth clips)
10
Mid profile, external corner joint 90o, 72x27x5mm
8
End caps for mid profile, pair (L/R), 55.6x26x26mm
Shown fitted
CODE GPMEX90BHC GPMEX90BHB
CODE GPMENDBHC GPMENDBHB
Vertical profile (lateral), 3000x46.5x33mm (cut-to-size)
CODE GPV3000ENDBHC GPV3000ENDBHB
12
7
CODE GPTENDBHC GPTENDBHB
PLEASE NOTE Appliance filler (APVAPPFILL**) is not available in brushed brass or brushed copper finishes. It is available in aluminum, matt white and matt graphite. We recommend using a finish that best matches the appliance.
Plinth corner connector
PLINTH
11
CODE GPMIN90BHC GPMIN90BHB
CODE GPTEX90BHC GPTEX90BHB
CODE BHCP30 BHBP30
WALL UNITS
13
Profile for wall cabinets, 3000x25x22mm
CODE GPW3000BHC GPW3000BHB
CODE BHCJC90 BHBJC90
FIXTURES
Securing brackets for top and mid rails, pack of 2, minimum order quantity of 25.
CODE SBPFIXING For use with
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
02
BASE UNITS - Top rail
PRODUCT SPECIFICATION For use on full height doors and drawer pack applications. Available in straight lengths of 4.1 meters, the rail can be cut to size using a circular chop saw, according to the design requirements. Manufactured out of anodized aluminium.
57
R5
CODE
FINISH
GPT4100BHC GPT4100BHB
Brushed Copper Brushed Brass
26
CABINETRY
INSTALLATION
To accommodate the rail, the cabinet requires a routered detail as per technical illustration below.
Securing brackets (SBPFIXING) fit the rail profiles to the cabinet. These need to be ordered separately (set of 2, minimum order quantity of 25).
1
22.5 57.5 32
2
R5
27 37
03
Order Online www.pws.co.uk
1
Slide clip along rail
2
Rotate and lock into position on bracket
BASE UNITS - Top rail accessories TOP RAIL, INTERNAL CORNER JOINT 90o Used when applying internal corner post and corner door solutions, in order to continue the rail around a corner.
A discreet corner joint that requires adjoining rails to be mitred at 45o
Screwless installation, simply push fit corner joint onto rail profile. Adhesive can be used to ensure a secure fixing.
NOTE This product is recommended for use with GPMIN90*** for a consistent corner joint.
29
Adjoining rail profiles require a 45 degree mitre. Screwless installation, simply push fit rails either side of the corner joint. Adhesive can be used to ensure a secure fixing.
5
29 56.6 57 Shown fitted
CODE
FINISH
GPTIN90BHC GPTIN90BHB
38
CODE
Brushed Copper Brushed Brass
FINISH
GPTINMJBHC GPTINMJBHB
Brushed Copper Brushed Brass
TOP RAIL, EXTERNAL CORNER JOINT 90o Used when applying external corner post or dedicated L or C shaped panels in order to continue the rail around a corner.
A discreet corner joint that requires adjoining rails to be mitred at 45o
Screwless installation, simply push fit corner joint onto rail profile. Adhesive can be used to ensure a secure fixing.
NOTE This product is recommended for use with GPMEX90*** for a consistent corner joint.
27
Adjoining rail profiles require a 45 degree mitre. Screwless installation, simply push fit rails either side of the corner joint. Adhesive can be used to ensure a secure fixing.
5
27 56.6 57 Shown fitted
CODE GPTEX90BHC GPTEX90BHB
FINISH
CODE
Brushed Copper Brushed Brass
GPTEXMJBHC GPTEXMJBHB
38
FINISH Brushed Copper Brushed Brass
TOP RAIL, END CAPS (L/R PAIR) Used to terminate a run. Recommended for use with undermount ovens to conceal cut edge of profile. 1.5
1.5
56.5 12.5
5
CODE GPTENDBHC GPTENDBHB
5
FINISH Brushed Copper Brushed Brass
PLEASE NOTE These products are lacquered in a flat finish and may vary slightly from the anodized profiles.
26
Screwless installation, simply push fit end cap onto rail profile. Adhesive can be used to ensure a strong fixing.
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
04
BASE UNITS - Mid rail
PRODUCT SPECIFICATION For use on drawer pack applications. Available in straight lengths of 4.1 meters, the rail can be cut to size using a circular chop saw, according to the design requirements. Manufactured out of anodized aluminium. CODE
R5
72
R5
FINISH
GPM4100BHC GPM4100BHB
Brushed Copper Brushed Brass
26
CABINETRY
INSTALLATION
To accommodate the rail, the cabinet requires a C shaped routered detail as per technical illustration below.
Securing brackets (SBPFIXING) fit the rail profiles to the cabinet. These need to be ordered separately (set of 2, minimum order quantity of 25).
1
R5
20.5
32
R5
73
20.5
2
27 37
05
Order Online www.pws.co.uk
1
Slide clip along rail
2
Rotate and lock into position on bracket
BASE UNITS - Mid rail accessories MID RAIL, INTERNAL CORNER JOINT 90o Used when applying half height internal corner post, in order to continue the rail around a corner.
5
72
Shown fitted
CODE GPMIN90BHC GPMIN90BHB
38
Adjoining rail profiles require a 45 degree mitre. Screwless installation, simply push to fit rails either side of the corner joint. Adhesive can be used to ensure a secure fixing.
FINISH Brushed Copper Brushed Brass
MID RAIL, EXTERNAL CORNER JOINT 90o Used when applying half height external corner posts or dedicated half height L or C shaped panels, in order to continue the rail around a corner. 5
72
Shown fitted
CODE GPMEX90BHC GPMEX90BHB
38
Adjoining rail profiles require a 45 degree mitre. Screwless installation, simply push to fit rails either side of the corner joint. Adhesive can be used to ensure a secure fixing.
FINISH Brushed Copper Brushed Brass
MID RAILS, END CAPS (L/R PAIR) Used to terminate a run. Recommended for use with undermount ovens and dishwasher frame (GPDDWF) to conceal cut edge of profile. 3
21
71.5
5
CODE GPMENDBHC GPMENDBHB
FINISH Brushed Copper Brushed Brass
PLEASE NOTE These products are lacquered in a flat finish and may vary slightly from the anodized profiles.
Screwless installation, simply push to fit end cap onto rail profile. Adhesive can be used to ensure a secure fixing.
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
06
BASE UNITS - Integrating under counter appliances
DISHWASHER 550
598
PLEASE NOTE We recommend setting the plinth across the kitchen at 155mm for extra clearance.
815-875*
Dishwashers can be used in true handless designs. XXL dishwasher models cannot be used with rail profiles. It is recommended to use a dishwasher with a height range adjustment between 815-875mm for the appliance to sit under the rail.
89
min. 90 max. 220* 53 100
UNDERMOUNT OVEN Scenario 1 shows the rails terminated on each side of the appliance and finished with GPTEND and GPMEND end caps. For end cap fitting, please see page 04 and 06. To continue the top rail profile across a run of units, with a undermount oven, a small filler is required at the top and bottom of the appliance (scenario 2).
Scenario 2 - Rails terminated either side of appliance. Filler used at bottom of undermount oven.
If using a freestanding appliance, end panels will need to be fitted either side of the appliance and the rail profile terminated against the panel. Scenario 1 - Filler split, top and bottom of undermount oven. Allowing top rail profile to continue across a run of units.
07
Order Online www.pws.co.uk
BASE UNITS - Dishwasher appliance
PRODUCT SPECIFICATION The dishwasher frame is designed for use with dishwashers on handleless kitchen designs where the continuation of the drawer pack is required across the dishwasher. The frame is machined to accept the mid rail profile for both recessed and flush rails. CODE GPDDWF For use with
325
657 73
346
325
597
Brushed Copper
Brushed Brass
590
28
PLEASE NOTE Also compatible with 3 drawer pack
CABINETRY
INSTALLATION
To accept the thickness of the frame system, adjacent cabinets need to be pulled forward by 28mm for units to align.
On recessed applications, it is recommended that the mid profile end caps are used on the dishwasher rail section to conceal the cut edge of the profile. We recommend pilot drilling the aluminium frame to suit the screws provided with the dishwasher, or use self tapping screws accordingly. Fixing holes are pre-drilled into the frame to attached the frontals. d D b B
a A
PLEASE NOTE Depending on the swing of the dishwasher the plinth will need to be notched
c C
A
Dishwasher
B
Frame system
C
Rail
D
Frontals
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
08
BASE UNITS - Internal waste bin
PRODUCT SPECIFICATION To maintain a strong, linear look, the dishwasher frame (GPDDWF) can also be used with internal pull-out waste bins. We recommend using 580-GY. The bins all come with fitting instructions. These should be referred to when installing product.
INSTALLATION
1. Screw attachement bracket onto dishwasher frame. using 3 x fixing points and adjust as required.
Cabinet gable
2. Using L-shape bracket fix top frame of pull-out bin to dishwasher frame. Dishwasher frame (GPDDWF)
Please refer to fitting instructions provided with bin for a detailed installation guide.
Pull-out waste bin (580-GY)
2
112
32
1
Attachment bracket
191
The bin the mounted to GPDDWF, which is attached to the rear of the frontals.
09
Order Online www.pws.co.uk
WALL UNITS - Profile
PRODUCT SPECIFICATION Rail profiles for wall units come in 3.9 metre lengths. It can be cut-to-size using a circular chop saw to fit between gables. Manufactured out of anodized aluminium, with a rubber seal on front edge. 18
CODE GPW3000BHC GPW3000BHB
FINISH Brushed Copper Brushed Brass 22
CABINETRY
INSTALLATION
The base panel of the wall unit needs to be set back 22mm to accommodate the rail profile. A routered groove is not required on the front edge of the base panel as per the aluminium, matt white and graphite rail finishes.
The rail profile slots onto the base panel. Clear adhesive can be used to bind the rail profile with the panel, ensuring a secure installation.
PLEASE NOTE A routered groove is not required on the front edge of the base panel, as per the aluminum, matt white and matt graphite rail finishes.
Base panel is set back 22mm
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
10
APPLIANCES/LARDER UNITS - Vertical profile (intermediate)
PRODUCT SPECIFICATION Used in the scenario where two opening doors meet. Available in lengths of 3 metres, and can be cut-to-size using a circular chop saw. Manufactured out of anodized aluminium.
CODE
30
20.5 12.5
FINISH
GPV3000MIDBHC GPV3000MIDBHB
Brushed Copper Brushed Brass
63
PLEASE NOTE 30mm spacing is required between two cabinets.
CABINETRY
INSTALLATION
The front of the gables on the cabinets need to be set back by 12.5mm for the trim to overlap behind the doors. Due to the width and placement of the profile, a 30mm spacer is required at the back between the two cabinets to maintain space created by the profile.
The profile is securely fixed to the cabinets with 4 x 30mm countersunk screws.
30mm spacer required between cabinets (not supplied)
11
Order Online www.pws.co.uk
TOP TIPS To conceal fixing, hide screw holes behind hinge plates.
APPLIANCES/LARDER UNITS - Vertical profile (lateral)
PRODUCT SPECIFICATION Used in the scenario where you have an opening door to one side and don’t require access to a handle on the opposite side. It can also be used to keep symmetry at the end of a run where an end panel or accessory is fitted.
30
20.5
Available in lengths of 3 metres, and can be cutto-size using a circular chop saw. Manufactured out of anodized aluminium.
12.5
46.5
CODE GPV3000ENDBHC GPV3000ENDBHB
FINISH Brushed Copper Brushed Brass
PLEASE NOTE 30mm spacing is required between two cabinets. 62mm spacing is required between cabinet and end panel (18mm)/feature post (50mm).
CABINETRY
INSTALLATION
The front of the gables on the cabinets need to be set back by 12.5mm for the trim to overlap behind the doors. Due to the width and placement of the profile, a 30mm spacer is required at the back between two cabinets and a 62mm spacer between cabinet and end panel (18mm)/feature post (50mm).
The profile is securely fixed to the cabinets with 4 x 30mm countersunk screws. TOP TIPS To conceal fixing hide screw holes behind hinge plates.
Image shows cabinet and end panel/feature post planning. In this scenario a 62mm spacer is required (not supplied).
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
12
PLINTH
PRODUCT SPECIFICATION Supporting plinth available in corresponding finishes to complete the look. Available in lengths of 3 metres, and can be cut-to-size using a circular chop saw. Manufactured out of anodized aluminium.
150
11
CODE
300
FINISH
BHCP30 BHBP30
Brushed Copper Brushed Brass
PLEASE NOTE Plinth clips supplied per profile.
INSTALLATION
1
13
Part B slides on the track at the back of the plinth. Once positioned rotated to lock in place.
Order Online www.pws.co.uk
2
Slide part A onto part B. Once plinth clips are installed , attached plinth onto cabinet legs.
PLINTH - Accessories PLINTH CORNER CONNECTOR Used when connecting plinth at 90 degree corners for a simple and neat installation.
40 145 40
CODE BHCJC90 BHBJC90
FINISH Brushed Copper Brushed Brass
2 x plinth sections slot into the plinth corner connector at a 90 degree angle. Screwless installation. Push to fit together.
PLEASE NOTE These products are lacquered in a flat finish and may vary slightly from the anodized profiles.
T: 01325 505599 (North) | 88 (South) F: 01325 505598 (North) | 89 (South)
14
T: 01325 505599 (North) I 88 (South)
www.pws.co.uk