Technical information for mantel surrounds by PWS Distributors Ltd

PWS TECHNICAL

Broadoak Mantel Surround You can create a Broadoak mantel surround as featured in the painted photography with the following components (all Broadoak items except when stated Milton) To order from stock: 22x 570x297mm 2x Corbel back panel (CORBP) 2x Corbel (CORBEL) 1x Milton top mantel (MTP1500) 2x Tall radius feature end (TFEP2120) 2x 18mm end panel (EP25) Ă4 %(0+* ". )! ,.+ü(! Ĩ āĆĀĀĩ 2x Cornice (C30) 2x Cornice corner block, left hand (CBL) 2x Cornice corner block, right hand (CBL) ā4 ǫ1((*+/! ,.+ü(! Ĩǫ ĂĀĀĀĩ Ă4 ǫ1((*+/! ,.+ü(! +.*!. (+ ' Ĩǫƫǫĩ

TIPS FOR FIXING TOGETHER THE COMPONENTS Corbel back panel, Milton top mantel and 18mm panel can be ﬁxed together by using biscuits or dowels and jointing plates

Battens of timber/MDF/chipboard can be used to screw ﬁx cornice to panels and radius feature end to corbel back panel

A batten of timber/MDF/chipboard can be used to secure the 18mm end panel to the cabinet

The cabinet needs to sit on a 36mm spacer

Extractor panel (18mm end panel) can sit on top of the stone splashback and ﬁxed to the 18mm panel using a timber/MDF/chipboard batten

PWS TECHNICAL

Broadoak Mantel Surround " ü00%*# 3 (( %*!0 & !*0 0+ 0$! ) *0!( /1..+1* Č 0$! āĉ)) !* , *!( /$+1( ! ü00! ý1/$ 3%0$ 0$! . %1/ "! 01.! !* Č 0$%/ is to avoid having a gap between the end panel and wall cabinet. A strip of edging tape could be used to pack the end panel out as illustrated below.

Packer (edging tape)

-YHTL WYVÄSL ULLKZ [V IL KV^LSLK together

The components that make up the front section of the mantel surround can be ü4! 0+#!0$!. 1/%*# %/ 1%0/ +. +3!(/ and timber/MDF/chipboard battens.

18mm end panel, cut to size and positioned on top of the cornice sections

18mm end panel (Plinth could be used here)

18mm end panel

ǫ 00!*č ü4%*# +.*% ! 0+ āĉ)) , *!(

ǫ%/ 1%0ĥ +3!( &+%*0

Batten; ü4%*# 18mm panel to radius feature end

.!3 ü4 +. !( to 18mm panel and corbel back panel

ǫ 00!*č ü4%*# 1((*+/! ,.+ü(! 0+ āĉ)) , *!(

18mm end panel

PWS TECHNICAL

Broadoak Mantel Surround

MANTEL 1 - OVER MANTEL - PWS KIT CODE - **OM1500

Exploded Component Illustration **C30

**CBL

**C30

**CBR **P30

**P30

**BP2000 **BFEP890

**P30

**BCB ***CORBEL

**BCB

**P30 **BP2000

***CORBEL

**OM1500 CONSISTS OF THE FOLLOWING:

Cornice, 3030x130x36.5mm Quantity - 1

Cornice corner block, left hand 135x180x37mm Quantity - 1

Cornice corner block, right hand 135x180x37mm Quantity - 1

Plinth Base radius feature end 3030x150x16mm 890x100x50mm Quantity - 1

Quantity - 1

Bullnose profile 2400mm

Bullnose profile corner block, unhanded

Corbel 175x115x115mm

Quantity - 1

Quantity -2

MANTEL 2 - SHELF MANTEL - PWS KIT CODE - **SM1500

Exploded Component Illustration

**FS24

**CORBEL **CORBEL

NOTE: that all end panels come with matching edging * * ! 1/! 0+ .!ġü*%/$ *5 10 ! #!/ċ

**SM1500 CONSISTS OF THE FOLLOWING:

Corbel 175x115x115mm

Flying Shelf 2400x325x28mm

Quantity -2

Quantity -1

PWS TECHNICAL

Broadoak Mantel Surround

MANTEL 3 - FULL MANTEL - PWS KIT CODE - **FM1500

Exploded Component Illustration

**CORBP **C30

**MTP1500

**CBL

**C30

**CBR

Over Mantle **OM1500

**CORBP

**EP25 NB -The back panel and return panels are not supplied with this kit. WůĞĂƐĞ ŽƌĚĞƌ ĂĚĚŝƟŽŶĂů ƉĂŶĞůƐ ƐŚŽƵůĚ ƚŚŝƐ ďĞ ƐƉĞĐŝĮĞĚ ŝŶ ƚŚĞ ĚĞƐŝŐŶ Žƌ ĂůƚĞƌŶĂƟǀĞůǇ ĐŽŶƚĂĐƚ Wt^ tŽƌŬƐƵƌĨĂĐĞƐ ĨŽƌ Ă ƋƵŽƚĂƟŽŶ͘

**EP25 **TFEP2120

**TFEP2120

**573

MANTEL TOP PANELS 1500mm

Mantels Top Panels are 1500mm wide but can be cut down to suit various opening widths.

**FM1500 CONSISTS OF THE FOLLOWING:

Over-mantel

570 x 297mm door

Quantity Supplied - 1 Quantity Supplied - 2

Corbel back panel 700x300x20mm

Cornice, 3030x130x36.5mm

Quantity - 2

Quantity - 1

Cornice corner block, left hand 135x180x37mm Quantity - 1

Cornice corner block, right hand 135x180x37mm Quantity - 1

Tall radius feature end post 2120x100x50mm Quantity - 1

End panel 2400x650x18mm

Mantel top panel 1500x250x20mm

Quantity - 1

PWS TECHNICAL

Fitzroy Mantel Surround

MANTEL 1 - OVER MANTEL - PWS KIT CODE - **OM1500

Exploded Component Illustration **CBL

**C30

**C30 **CBR

**P30 **TRFEP2400 **TRFEP2400

**BCB

**P30

**BP2000

**BCB

***CORBEL

**OM1500 CONSISTS OF THE FOLLOWING:

Cornice, 3030x130x36.5mm Quantity - 1

Cornice corner block, left hand 135x180x37mm Quantity - 1

Cornice corner block, right hand 135x180x37mm Quantity - 1

Plinth 3030x150x16mm Quantity - 1

Tall radius feature end post 2400x100x50mm Quantity - 1

Bullnose profile 2400mm

Bullnose profile corner block, unhanded

Corbel 175x115x115mm

Quantity - 1

Quantity -2

MANTEL 2- SHELF MANTEL - PWS KIT CODE - **SM1500

Exploded Component Illustration

**FS24

**CORBEL **CORBEL

Please note that all end panels come with matching edging * * ! 1/! 0+ .!ġü*%/$ *5 10 ! #!/ċ **SM1500 CONSISTS OF THE FOLLOWING:

Corbel 175x115x115mm

Flying Shelf 2400x325x28mm

Quantity -2

Quantity -1

PWS TECHNICAL

Fitzroy Mantel Surround

MANTEL 3 - FULL MANTEL - PWS KIT CODE - **FM1500

Exploded Component Illustration **CORBP **C30

**MTP1500

**CBL

**C30

Over Mantle **OM1500 **CBR

**CORBP

NB -The back panel and return panels are not supplied with this kit. WůĞĂƐĞ ŽƌĚĞƌ ĂĚĚŝƟŽŶĂů ƉĂŶĞůƐ ƐŚŽƵůĚ ƚŚŝƐ ďĞ ƐƉĞĐŝĮĞĚ ŝŶ ƚŚĞ ĚĞƐŝŐŶ Žƌ ĂůƚĞƌŶĂƟǀĞůǇ ĐŽŶƚĂĐƚ Wt^ tŽƌŬƐƵƌĨĂĐĞƐ ĨŽƌ Ă ƋƵŽƚĂƟŽŶ͘

**TFEP2120

**EP25 **TFEP2120

**TFEP2120

**573

MANTEL TOP PANELS 1500mm

Mantels Top Panels are 1500mm wide but can be cut down to suit various opening widths.

**OM1500 CONSISTS OF THE FOLLOWING:

Over Mantel

Quantity - 1

Corbel back panel Cornice, Cornice corner block, 700x300x18mm 3050x90x115mm left hand 169x119x93mm Quantity - 1 Quantity - 1 Quantity - 2 Quantity Supplied - 2 570 x 297mm door

Cornice corner block, right hand 169x119x93mm Quantity - 1

Plinth 3030x150x16mm Quantity - 1

Tall radius feature end post 2400x100x50mm Quantity - 1

End panel 2400x650x18mm Quantity -2

PWS TECHNICAL

Mornington Mantel Surround

MANTEL 1 - OVER MANTEL - PWS KIT CODE - **OM1500 Exploded Component Illustration **C30

**P30

**FS24 ***CORBEL

***CORBEL

**SM1500 CONSISTS OF THE FOLLOWING:

Cornice,º 3030x130x36.5mm

Plinth 3030x150x16mm

Corbel 175x115x115mm

Flying shelf 2400x325x28mm

Quantity - 1

Quantity -2

Quantity - 1

ºMornington Beaded option also available.

MANTEL 2 - SHELF MANTEL - PWS KIT CODE - **SM1500 Exploded Component Illustration

**FS24

**CORBEL **CORBEL

**SM1500 CONSISTS OF THE FOLLOWING:

Corbel 175x115x115mm

Flying Shelf 2400x325x28mm

Quantity -2

Quantity -1

Please note that all end panels come with matching edging * * ! 1/! 0+ .!ġü*%/$ *5 10 ! #!/ċ

PWS TECHNICAL

Mornington Mantel Surround

MANTEL 1 - CLADDING MANTEL - PWS KIT CODE - **CM1500

Exploded Component Illustration

**MTP1500

**C30

**MSP1355

**MSP1355 ***CORBEL

***CORBEL **FS24

MANTEL TOP PANELS 1500mm

Mantels Top Panels are 1500mm wide but can be cut down to suit various opening widths.

**CM1500 CONSISTS OF THE FOLLOWING:

Cornice, º 3030x130x36.5mm

Corbel 175x115x115mm

Quantity - 1

Quantity -2

Mantel top panel º 1500x250x20mm Quantity - 1

ºMornington Beaded option also available.

Mantel side panelº 1355x300x20mm Quantity - 2

Flying shelf 2400x325x28mm Quantity - 1

PWS TECHNICAL

Corbels CLASSIC DESIGN

CONTEMPORARY

SHCLCORBEL

SHCTCORBEL

Shelf corbel, classic style, 188x168x45mm, sanded

Shelf corbel, contemporary style, 192x172x45mm, sanded

22.5

168

172

64 188

BACK

192

SIDE

BACK

SIDE

INSTALLATION The shelf corbels have 2 main applications: 1. Shelf support and 2. Island end support. They have been designed with a pre-installed metal keyhole bracket on the back to enable easy installation with a screw. IMPORTANTč (! /! //!// 3 (( +*/0.1 0%+* * ) 0!.% ( /1 /0. 0!Č * !0!.)%*! 3 (( ü4%*#/ 0+ /1%0ċ

PWS TECHNICAL

Corbels The corbel is a multi -functional accessory and can be installed onto various substrates, including solid walls (in chimney breast applications) stud walls and end panels.

175

115

155 **CORBEL

FIXING INTO SOLID WALLS

When securing into solid walls, it is recommended to screw 0$.+1#$ 0$! ' , *!( * %*0+ 0$! 3 (( 3%0$ /1%0 (! ü4%*# dependent upon the wall construction.

SHELF SUPPORT APPLICATION

When the corbel is being used as a shelf support, it is recommended to install by securing a timber block to the underside of the shelf. This sits inside the void of the corbel preventing it from moving when installed.