Dental fixation systems
Attachments
Take off with well-anchored prostheses Reliability and Swiss quality
Index: Endo, pages 4-7: Cylinco, Mooser Anchors, pages 10-17: Sfera, Ecco, Tima Implantology, page 20: Diagnostic Pin Bars, pages 20-25: Rondo, Micro, Macro Materials, pages 26-27: indications & heat treatments Acknowledgements: The products in this catalogue were developed by UNOR SA. Due to the new normative requirements and the good business relationship between our two companies, PX Dental SA has taken over this range of reliable and perfectly designed products as a manufacturer.
2
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Dental fixation systems
Endo systems Root reconstructions
Root post Cylinco references 1.2
Cylinco adhesive 14.0
9.0
Cylinco retentive
1.3
15.0
10.0
Cylinco instruments
1.4
Cylinco
Cylinco
Cylinco
Cylinco
17.0
12.0
Cylinco
Cylinco
1.6
1.5
Cylinco
Cylinco
Cylinco
13.0
4
18.0
14.5
19.5
Order no.
Description
Materials
Marking • Ø
Specifications
1125389
Adhesive head
HMA
White • 1.2mm
for cast-on, evacuation groove
1125390
Adhesive head
HMA
Yellow • 1.3mm for cast-on, evacuation groove
1125391
Adhesive head
HMA
Red • 1.4mm
for cast-on, evacuation groove
1125392
Adhesive head
HMA
Blue • 1.5mm
for cast-on, evacuation groove
1125393
Adhesive head
HMA
Green • 1.6mm for cast-on, evacuation groove
1125394
Flat head
Titanium
1 • 1.2mm
evacuation groove
1125395
Flat head
Titanium
2 • 1.3mm
evacuation groove
1125396
Flat head
Titanium
3 • 1.4mm
evacuation groove
1125397
Flat head
Titanium
4 • 1.5mm
evacuation groove
1125398
Flat head
Titanium
5 • 1.6mm
evacuation groove
1125727
Root canal drill
White
first calibration with the contra-angle
1125697
Root canal drill
Yellow
first calibration with the contra-angle
1125698
Root canal drill
Red
first calibration with the contra-angle
1125699
Root canal drill
Blue
first calibration with the contra-angle
1125700
Root canal drill
Green
first calibration with the contra-angle
1125701
Reamer
White
manual work for the final dimension
1125702
Reamer
Yellow
manual work for the final dimension
1125728
Reamer
Red
manual work for the final dimension
1125666
Reamer
Blue
manual work for the final dimension
1125712
Reamer
Green
manual work for the final dimension
1125663
Extension for contra-angle
for instruments
1125692
Chuck for manual work
for instruments/extension
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Endo systems
Cylinco
The versatile cylindrical-conical, with groove Limitation of application: when the cavity inside the root canal is too large to achieve continuous contact. No connection casting possible with non-precious alloys.
Cement evacuation groove
Description Root post with cylindrical-conical profile. Universal adhesive head, for impression taking and false stump. High precision due to well adapted root canal instruments. Universally usable posts with adhesive head suitable for divergent abutment impressions and direct abutments. Flat-headed titanium posts are recommended for abutments and provisional work.
Cylindro-conical to fit all sizes of teeth
Indications Root caps for partial and total dentures, direct and indirect abutments, root post crowns and temporary work.
5
▶ retentive ▶ made of titanium ▶ cylindro-conical profile Marking of dimensions with a number or a colour code
5
▶ adhesive ▶ HMA for overcasting ▶ cylindro-conical profile
Cylinco Titanium retentive left Cylinco HMA adhesive right
5
Root post Mooser references
Order no.
Description
Materials
Marking • Ø
Specifications
1125368
Adhesive head
HMA
White • 1.5mm
for cast-on
1125369
Adhesive head
HMA
Yellow • 1.7mm for cast-on
1125370
Adhesive head
HMA
Red • 2.0mm
for cast-on
1125371
Adhesive head
HMA
Blue • 2.2mm
for cast-on
1125372
Flat head
Titanium
1 • 1.5mm
1125373
Flat head
Titanium
2 • 1.7mm
1125374
Flat head
Titanium
3 • 2.0mm
0.8
1125375
Flat head
Titanium
4 • 2.2mm
1.7
1125376
Cylindrical head
PMMA
Yellow
burnout resin, sizes 1 and 2
1125377
Cylindrical head
PMMA
Blue
burnout resin, sizes 1 and 2
1125379
Root canal drill
White
first calibration with the contra-angle
1125380
Root canal drill
Yellow
first calibration with the contra-angle
1125381
Root canal drill
Red
first calibration with the contra-angle
1125382
Root canal drill
Blue
first calibration with the contra-angle
1125383
Pilot reamer
White
second calibration with the contra-angle
1125384
Pilot reamer
Yellow
second calibration with the contra-angle
1125385
Pilot reamer
Red
second calibration with the contra-angle
1125386
Pilot reamer
Blue
second calibration with the contra-angle
1125387
Reamer
White
manual work for the final dimension
1135878
Reamer
Yellow
manual work for the final dimension
1135879
Reamer
Red
manual work for the final dimension
1128320
Reamer
Blue
manual work for the final dimension
1125663
Extension for contra-angle
for instruments
1125692
Chuck for manual work
for instruments/extension
Mooser adhesive
1.5
12.3
7.8
Mooser retentive
2°39ʻ
14.5
10.0
Mooser instruments
2°39ʻ 0.8 2.2
2.0
15.5
11.0
2°39ʻ
2°39ʻ 1.0
6
17.7
13.2
1.0
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Endo systems
Mooser
The most classic of the conical root posts Limitation of application: when the cavity inside the root canal is too large to achieve continuous contact. No connection casting possible with non-precious alloys.
Complete system
Description Universal adhesive head, for impression taking and false stump. High precision due to well adapted root canal instruments.. Indications Root caps for partial and total dentures, direct and indirect abutments, root post crowns and temporary work.
4
Conical for a perfect fit
▶ rétentive ▶ made of titanium ▶ conical profile Marking of dimensions with a number or a colour code
4
▶ adhesive ▶ HMA for overcasting ▶ conical profile
Mooser burnable on the left Mooser titanium retentive in the middle Mooser HMA adhesive on the right
7
8
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Dental fixation systems
Spherical anchors Fixation of prostheses on natural teeth or implants
Matrices & patrices Sfera references
Order no.
Description
Materials
Specifications
1125408
Matrice complete standard
Au-Pt
do not heat treat
1125409
Matrice big retention
Au-Pt
do not heat treat
1126723
Flexible pink ring
Teflon
for replacement of worn rings
1125407
Complete anchor
Au-Ag • Au-Pt
1125403
Complete anchor
Au-Pt • Au-Pt
1125405
Complete anchor
HMA • Au-Pt
1125404
Complete anchor
PMMA • Au-Pt
Sfera Patrices
1125411
Patrice Ø2.25
Au-Ag
more resistant to wear, to braze and then harden!
ø 2.25
1125401
Patrice Ø2.25
Au-Pt
for welding
1125402
Patrice Ø2.25
HMA
for cast-on
1125660
Patrice Ø2.25
PMMA
red burn-out resin
1128324
Parallelometer insert
1126240
Transfer jig - non-retentive, with plate
1125677
Transfer jig - retentive sphere, without plate
better hold in impressions
1126628
Spacer for standard attachment
resin, with «S» designation, for 1125408
1125693
Spacer for attachment big retention
resin, with «S» designation, for 1125409
1125654
Distance washer
1125664
Help for the assembly of the flexible pink ring 1126723
1125675
Activator/Deactivator
Sfera Matrix ø 3.00 2.30 ø 4.00 2.30
Sfera Complete ø 3.00 2.30
2.85 ø 3.50
2.30
ø 3.15
Sfera auxiliaries
10
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
for the male part
Spherical anchors Ø2.25
Sfera ø3.50 h2.85 The smallest
Limitation of application: prostheses with unilateral extension, without transverse connection.
Description Classic, well-proven snap-in anchor, low height, with 4 different male parts, for soldering, for casting of connections and for casting. Indications Removable prostheses on root caps and implants, for example - total dentures - intercalated prostheses and mixed intercalated and extended prostheses.
2 4
Height reduced to an absolute absolute minimum.
Stop for the resin ring to prevent it from being pushed into the retention area.
Rounded shape of the underside, prevents damage to the male part.
Optimal slots and rounded, give more stability.
▶ minimum height ▶ rounded shape ▶ stability
High-gloss surface polished with diamonds.
▶ retention stop ▶ Ø 2,25 mm ▶ diamond polished surface ▶ 4 materials
Matrice: Au-Pt Patrice: Au-Ag
11
Matrices & patrices Ecco references
Order no.
Description
Materials
Ecco retention
1125421
Retention cap
Titanium
Ecco spring
1125428
Internal matrice
Titanium grade 5
with mounted spring
1125418
Complete matrice
Titanium grade 5
with mounted spring
1125414
Complete anchor
Titanium grade 5 / Au-Ag
with more wear-resistant male part made of Au-Ag
1125419
Internal matrice
Au-Pt
1125420
Matrice interne forte
Au-Pt
1125417
Complete matrice
Titanium grade 5 / Au-Pt with internal female part in precious metals
1125413
Complete anchor
Titanium grade 5 / Au-Pt with internal female part in precious metals
1125427
Soft internal matrice
Titanium grade 5
yellow, separating force approx. 600 g*.
1125425
Internal matrice standard
Titanium grade 5
green, separating force approx. 800 g*.
1125426
Strong internal matrice
Titanium grade 5
red, separating force approx. 1200 g*.
1125416
Matrice complète standard
Titanium grade 5
with internal female part made of titanium/PEEK
1125415
Complete anchor standard
Titanium grade 5 / Au-Ag
with more wear-resistant male part made of Au-Ag
1125412
Complete anchor standard
Titanium grade 5 / Au-Pt
1125423
Soft internal matrice
Titanium grade 5
yellow, separating force approx. 600 g*.
1125422
Internal matrice standard
Titanium grade 5
green, separating force approx. 800 g*.
1125424
Strong internal matrice
Titanium grade 5
red, separating force approx. 1200 g*.
1125445
Patrice Ø2.25
Au-Ag
more resistant to wear, to braze and then harden!
1125431
Patrice Ø2.25
Au-Pt
to braze
1125432
Patrice Ø2.25
HMA
for cast-on
1125662
Patrice Ø2.25
PMMA
green burn-out resin
Ecco Au-Pt ø 3.40 1.75
3.00
3.85
Ecco PEEK
ø 3.40 1.75
3.10
3.85
Ecco resin
Ecco/Tima Patrices ø 2.25 2.60 ø 3.15
12
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Specifications
for heavily worn patrices (V mark on matrice)
*Inner female mounting part not required.
Spherical anchors Ø2.25
Ecco ø3.40 h3.85
Further reduced retention cap for a reliable fit in the prosthesis.
From modern to classic... anything goes!
Limitation of application: prostheses with unilateral extension, without transverse connection.
Description Modern ball anchor with four different male parts. Four internal female parts (with synthetic retention, PEEK, lamellae or ring springs) can be screwed or unscrewed in seconds in the retention cap.
Internal female part with hexagonal inner surface, can be exchanged quickly with the ingenious torque spanner.
The male parts are identical to those of the Tima system. Indications Removable prostheses on root caps and implants, for example - total dentures - intercalated prostheses and mixed intercalated and extended prostheses.
4 4
Newly designed, high-strength PEEK resin insert for durable application, well protected in the inner female housing.
▶ 4 retention systems ▶ quick and easy to change ▶ also for implants
Diameter of the male part 2.25 mm (same as many spherical pillars).
▶ audible CLICK ▶ compatible Ø 2,25 mm ▶ Tima - Ecco identical ▶ 4 materials
Matrice: Ti-PEEK Patrice: HMA
13
Matrices Ecco options
Ecco retention
Ecco spring
Ecco Au-Pt normal strong (V-mark)
Ecco PEEK yellow = soft green = standard red = strong
Ecco resine yellow = soft green = standard red = strong blue = mounting matrix
14
Very small retention cap for reliable retention in the prosthesis.
Female part with steel spring. The function is identical to that of the Tima female part. The spring is not interchangeable. If this is necessary, the entire female part must be replaced.
Female parts in precious alloy, the classic in two versions: normal, or strong (with V-mark) for use with worn patrices.
Internal female parts with internal rings made of PEEK resin. PEEK is a very strong and wear-resistant plastic. This design is available in three retention strength versions.
Inner females with «soft» resin rings for a smooth sliding fit. Available in three retention strength versions.
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Auxiliaires Ecco references
Order no.
Description
Specifications
1125718
Internal mounting matrice
blue for Ecco resin (for ref. 1125422, 1125423, 1125424)
1128324
Parallelometer insert
for the male part
1125659
Torque key
hexagon, for all internal female parts
1125688
Spacer
resin, red
1125695
Transfer jig - non-retentive, with plate
1125677
Transfer jig - retentive sphere, without plate, better hold in impressions
1125675
Activator/Deactivator
for internal female parts Au-Pt
Patrices Ecco/Tima Ø2.25 options
Ecco/Tima Au-Pt
The Au-Pt male part is intended to be soldered to a root cap (hardness: 290 Vickers).
Ecco/Tima Au-Ag
New, more wear-resistant male part made of Au-Ag for welding onto a root cap (hardness according to hardening method: 345 Vickers).
Ecco/Tima HMA
Precious metal male part made of HMA alloy for cast-on (hardness: 240 Vickers).
Ecco/Tima résine
Resin male part for casting with precious and non-precious metals with a 0.2% yield strength of at least 500 N/mm2.
The 2.25 mm diameter of the male part is identical to that of many spherical implant abutments.
Patrice: Au-Pt
15
Matrices & patrices Tima references
Order no.
Description
Materials
1125435
Empty matrice
Titanium grade 5
1125437
Standard spring
Steel
separating force approx. 800 g
1125442
Soft spring
Steel
separating force approx. 600 g
1125439
Locking screw
Titanium grade 5
1125433
Complete standard matrice
Titanium grade 5
with threaded ring for mounting, ref. 1125717
1126859
Complete soft matrice
Titanium grade 5
with threaded ring for mounting, ref. 1125717
1125430
Complete anchor
Titanium grade 5 / Au-Ag
with more wear-resistant male part made of Au-Ag
1125429
Complete anchor
Titanium grade 5 / Au-Pt
1125440
Yellow locking screw mounted with strong spring
Steel / Titane grade 5
for worn-out patrices
Tima Patrices
1125443
Strong spring
Steel
for yellow locking screws (worn out patrices)
ø 2.25
1125445
Patrice Ø2.25
Au-Ag
more resistant to wear, to braze and then harden!
1125431
Patrice Ø2.25
Au-Pt
to braze
1125432
Patrice Ø2.25
HMA
for cast-on
1125662
Patrice Ø2.25
PMMA
green burnout resin
1128324
Parallelometer insert
1125695
Transfer jig - non-retentive, with plate
1125677
Transfer jig - retentive sphere, without plate
1125687
Screwdriver
1125726
Extractor
1125725
Spacer
1125717
Threaded ring for mounting
Tima ressort
ø 3.70
3.70
2.60 ø 3.15
Tima auxiliaries
TIMA
T
16
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Specifications
for the male part
better hold in impressions
for empty female part White resin
with «T» marking
Spherical anchors Ø2.25
Tima ø3.70 h3.70 The classic tested a thousand times over!
Developed in collaboration with Prof. S. Palla, Head of the KFS Division at the Centre for Dental, Oral and Maxillary Dentistry of the University of Zurich.
Also for worn male parts with strong spring
Description Proven spherical anchor, consisting of four different spherical male parts for soldering, casting of connection and resin for casting. The female part consists of the empty female part and a closing screw. Between the two there is an exchangeable steel spring for retentive support. Indications Removable prostheses on root caps and implants, for example - total dentures - intercalated prostheses and mixed intercalated and extended prostheses.
1 4
▶ 3 retention forces ▶ also for worn out patrice ▶ also for implants
Special thread locking the closing screw
Slight taper to guide the closing screw
pressure and pushing forces not transmitted to the the spring (no deactivation)
Easy activation due to quick spring exchange
More wear-resistant male part made of Au-Ag 2.25 mm male diameter (same as many spherical abutments)
▶ audible CLICK ▶ compatible Ø 2,25 mm ▶ Tima - Ecco identics ▶ 4 materials
Matrice: Ti grade 5 Patrice: Au-Ag
17
18
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Dental fixation systems
Bars
Primary blocking and force distribution
Bars & riders Rondo references Rondo rider 2.50
3.50
Order no.
Description
Materials
Specifications
1125470
Rider
Au-Pt
milled, length 3.5mm
1125472
Rider
PEEK
for round bar, length 4mm
1125471
Round bar, 50 mm, Ø1.90
Au-Pt
2,24 g1 / 0,45 g2
1125668
Round bar, 80 mm, Ø1.90
PMMA
burn-out resin
2.50
Rondo bars 1.90
50/90/200
1 = approximate weight per piece 2 = approximate weight per cm
Rondo auxiliaries BARS
1125694
Transfer jig
for Rondo, length 3 mm
1125715
Activator
for Rondo, Micro & Macro
Diagnostic Pin & Tube for implant diagnostic references Diagnostic pin & tube
Order no.
Description
Materials
Specifications
1125661
Pin
Titane
ø 2,5 mm, length 7 mm
1125719
Tube
Titane
inside diameter ø 2,25 mm, length 7 mm
Indications & Description The pin/tube is used in implantology as a diagnostic instrument. The pin or tube is integrated into the (resin) diagnostic plate and allows the user to determine the optimal position for implant placement.
20
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Determines the optimal position for implant placement
Bars Ø1.90
Rondo h2.50 Proven simplicity
Limitation of application: rigid construction with straight bar connection from A to B. One-sided prostheses without cross-locking.
Description Rondo is a simple and safe system for connecting bars. The bars are available in precious metal or in burnable resin. The rider is made of precious metal and thus guarantees good flexibility of the slats.
PEEK rider
Indications For partial and total dentures on implants and root caps
2
▶ retention ▶ reliable function ▶ small dimensions
PMMA (for casting) - 80mm
Au-Pt - 50mm
▶ also for implants Precious metal rider for optimum flexibility of the slats
2
▶ easy to fit ▶ small dimensions Milled rider, compatible with 1.9mm round profiles
21
Bars & riders Micro references Micro matrice 3.50
50
2.75
2.80
Order no.
Description
Materials
Specifications
1125453
Matrice 50 mm
Au-Pt
perforated retentions, 1,78 g1 / 0,35 g2
1125455
Matrice 50 mm
Au-Pt
milled, 2,13 g1/ 0,42 g2
1125454
Matrice 50 mm
Titanium
milled
1125452
Bar 50 mm, Ø1.65
Au-Pt
parallel, 2,56 g1 / 0,51 g2
1125456
Bar 50 mm, Ø1.65
Titanium
parallel
1125653
Bar 80 mm, Ø1.65
PMMA
parallel, burn-out resin
1125458
Bar 50 mm, Ø1.65
Au-Pt
ovoid, 2,27 g1/ 0,45 g2, incl. wire for resiliency
1125459
Bar 50 mm, Ø1.65
Titanium
ovoid, incl. wire for resiliency
1125673
Bar 80 mm, Ø1.65
PMMA
ovoid, burn-out resin, incl. wire for resiliency
50 2.60
Micro bars 1.65
50 /80
2.30
1.65
50 /80
2.30
1 = approximate weight per piece 2 = approximate weight per cm
Micro auxiliaries BARS
22
1125656
Parallelometer insert
for Micro bars
1125657
Transfer jig
for Micro, length 30 mm
1125715
Activator
for Rondo, Micro & Macro
1125665
Wire for resiliency.
length 50 mm
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Bars Ø1.65
Micro h2.60
Friction or retention bars, in reduced size
Perforated retentions Au-Pt - 50mm
Limitation of application: for parallel bars: articulated constructions; for ovoid and round bars: rigid constructions; onesided prostheses without transverse connection.
Description The bar programme includes friction bars for rigid prostheses and retention bars for resilient solutions.
Milled matrice Au-Pt - 50mm
All rods are available in Micro and Macro sizes and in materials suitable for brazing, laser application (titanium) and casting (resin). Dies are available with perforated retention holes or milled. Indications For partial and total dentures on implants and root caps.
Milled matrice Titanium - 50mm
▶ retention or friction
3
▶ Au-Pt or titanium ▶ reliable function
PMMA (for casting) - 80mm
▶ also for implants Titane - 50mm
3
3
▶ prefabricated bars ▶ fast mounting ▶ retentive or straight
Au-Pt - 50mm
Gamme complète des barres Micro
23
Bars & riders Macro references Macro matrice 4.50
50
3.50
3.60
Order no.
Description
Materials
Specifications
1125462
Matrice 50 mm
Au-Pt
perforated retentions, 1,78 g1 / 0,35 g2
1125464
Matrice 50 mm
Au-Pt
milled, 2,13 g1/ 0,42 g2
1125463
Matrice 50 mm
Titanium
milled
1125461
Bar 50 mm, Ø2.20
Au-Pt
parallel, 2,56 g1 / 0,51 g2
1125465
Bar 50 mm, Ø2.20
Titanium
parallel
1125680
Bar 80 mm, Ø2.20
PMMA
parallel, burn-out resin
1125467
Bar 50 mm, Ø2.20
Au-Pt
ovoid, 2,27 g1/ 0,45 g2, incl. wire for resiliency
1125468
Bar 50 mm, Ø2.20
Titanium
ovoid, incl. wire for resiliency
1125681
Bar 80 mm, Ø2.20
PMMA
ovoid, burn-out resin, incl. wire for resiliency
50
3.70
Macro bars 2.20
50 /80
3.00
2.20
50 /80
3.00
1 = approximate weight per piece 2 = approximate weight per cm
Macro auxiliaries
MACRO BAR
BARS
24
1125724
Parallelometer insert
for Macro bars
1125685
Transfer jig
for Macro, length 30 mm
1125715
Activator
for Rondo, Micro & Macro
1125711
Wire for resiliency.
length 50 mm
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Bars Ø2.20
Macro h3.50
Perforated retentions Au-Pt - 50mm
The «Micro» options, but stronger Limitation of application: for parallel bars: articulated constructions; for ovoid and round bars: rigid constructions; onesided prostheses without transverse connection.
Description The bar programme includes friction bars for rigid prostheses and retention bars for resilient solutions.
Milled matrice Au-Pt - 50mm
All rods are available in Micro and Macro sizes and in materials suitable for brazing, laser application (titanium) and casting (resin). Dies are available with perforated retention holes or milled. Indications For partial and total dentures on implants and root caps. Milled matrice Titanium - 50mm
▶ retention or friction
3 3
▶ Au-Pt or titanium ▶ reliable function ▶ also for implants
3
▶ prefabricated bars ▶ fast mounting ▶ retentive or straight
Au-Pt - 50mm
Titane - 50mm
PMMA (for casting) - 80mm Full range of Macro bars
25
Materials and alloys
Technical infos Specifications and indications
Important notes for attachments and auxiliary parts • For anchors, use gold and silver male parts whenever possible. After hardening (500˚ C/30min), these male parts reach the maximum hardness and abrasion resistance. • When mounting several female anchor parts, it is essential to ensure axially parallel alignment. • Attachments made of precious metals or titanium can be sterilised or disinfected. However, attachments made of resin should not be sterilised.
Materials for attachments List of materials and their applications on the attachments in this catalogue. PMMA
PEEK
Burnout without residue
Very strong and wear-resistant plastic.
Application: • for casting with all precious and non-precious alloys with a 0.2% yield strength of at least 500 N/mm2.
Application: • friction liner • backside of female parts
POM For auxiliary parts Application: • for bonding • for mounting in resin
• Attachments are medical devices subject to traceability. Once opened, the packaging or components cannot be taken back. Instructions for use: see attached documentation and application restrictions. In the shop, under www.pxdental.com you can select the desired attachment and download the desired instructions or documentation.
26
PX Dental SA • +41 (0)32 924 21 20 • www.pxdental.com • pxdental@pxgroup.com
Alloys (table on the right) List of alloys and their applications, as well as their chemical composition, and important information for their use in the dental practice or laboratory. Au-Pt: Precious metal alloy free of palladium, cast-on not possible. HMA: Precious metal alloy, for cast-on. Au-Ag: Wear-resistant precious metal alloy for soldering and hardening! PMMA: Residue-free burn-out resin, for casting the male part with all precious and non-precious metal alloys with a 0.2% yield strength of at least 500 N/ mm2. Titane: Titanium alloy Ti 6Al 4V, cast-on not possible.
Pure titanium, grade 2
Pure titanium, grade 4
Biocomptible titanium grade 5
collage de résine1
collage de résine1
collage de résine1
gris
gris
› 99.00 0.10 0.30 0.25 0.03 0.015 -
Alloy PX N°7810 HMA
Alloy PX N°5812 Au-Ag
Alloy PX N°7811 Au-Pt
ressort
braser, coulée de rac., résine1
braser, résine1
braser, résine1
gris
gris
blanc
blanc
jaune
~ 99.00 0.10 0.50 0.40 0.05 0.015 -
~ 90.00 0.08 0.25 0.13 0.05 0.012 5.50-6.50 3.50-4.50 -
x 2.5-7.5 19-25 42-48 2-6 x 2-6 16-20 -
60.00 19.00 20.00 1.00 -
10.00 10.00 30.00 34.90 14.00 1.00 0.05 0.05
70.00 8.50 13.40 7.50 0.50 0.10 -
16102
16102
1604-1660
14403
1400-1490
1130-1180
895-1010
160 -
210 -
350-385 -
-
145 240 225
275 345 -
170 295 280
-
-
-
-
1000/30
1000 / 2
750/5
-
-
-
-
700/30
500 / 30
450/15
Steel
Application
Color
1 = for resin mounting 2 = melting point 3 = solidus x = addition
Composition Ti C max. Fe max. O max. N max. H max. Al max. V max. Ni Co W Be Mo Cr Au Pt Ag Pd Cu Zn Ir Rh Ru Melting interval °C Hardness softened HV5 hardened HV5 self-hardening HV5 Softened °C / min Hardened °C / min
Do you like implants? Like you, we love them too! Our range of products offers you a wide variety of solutions to meet all your patients’ needs.
Sfera big retention
Instructions for use: www.pxdental.com In the shop, choose the desired attachment, then download the instructions or the documentation.
Sfera
Ecco Au-Pt
Ecco PEEK
Ecco spring
Reseller:
Ecco resin
Do you have any questions? We will be happy to answer them for you.
PX Dental SA Champs-Montants 16a CH - 2074 Marin Tél.: +41 (0) 32 924 21 20 pxdental@pxgroup.com www.pxdental.com
VERS: 9 juin 2021 12:19 Attachements_PX_2021_EN
Tima spring