RAGSTER index 11 10 8 12 13 56
amplifiers woofers enclosures component kits coaxials accessories
Amplifiers: DAA series
page 4
Amplifiers: DAA series
page 6
Amplifiers: DAB series
page 8
DVC woofers: DWC series
page 10
DVC woofers: DWH series
page 12
SVC woofers: DWE series
page 13
SVC woofers: DWA series
page 14
Tweeters & Midrange
page 15
Woofers Enclosures
page 16
Component Systems: DCC series
page 18
Component Systems: DSK series
page 19
Component Systems: DSZ series
page 20
Component Systems: DS series
page 22
Component Systems: DSE series
page 23
Coaxials: DC series
page 24
Coaxials: DCM series
page 24
Coaxials: DCE series
page 25
Accessories “the power inside”
page 26
• distribution blocks
page 27
• power capacitors
page 27
• power & ground wires
page 28
• speaker wires
page 28
• signal cables
page 28
• install kits
page 29
• battery terminals
page 29
• terminals & connectors, fuses
page 29
“the Dragster Crew”
page 30
Technical data
page 30
D
ragster was created for those who have a genuine passion for music in the car. Music than can be listened to at realistic levels and with a quality of reproduction that does full justice to the concert stage. From crystal clear highs to the deepest lows, at any volume level and with no distortion. Accurate and realistic performance of all types of music. From the beginning, Dragster was engineered as high end car audio components that will be considered “future products” from many decades to come. Using both established and revolutionary technologies to deliver an exceptional combination of performance and value. Dragster circuit designs and topology were specifically created for maximum flexibility, giving owners the option to expand and re-configure their systems should they decide to
change automobiles or upgrade their car audio system. In developing the line we worked with engineers, installers and auto manufacturers, testing and refining our products in the most rigorous and demanding environmental conditions. From the development of improved production techniques, every effort was made to achieve the ultimate combination of unparalleled reliability and relentless performance. We combined Italian inspiration and flair with advanced technology and the magical result was Dragster. Already we are exporting our car audio line to four continents and today Dragster is distributed over the world. We have won justly deserved and accolades from specialists in many European countries. In car audio shows and fairs all over
Europe, in the installation bays of the best dealers, Dragster has quickly won universal recognition. The European press have tested Dragster amps and speakers with successful results, acknowledging their superior class and fantastic performances. Now we can say that Dragster has won the recognition and success that it deserves. Dragster chooses only specialized technical dealers who are professionals in their field and recognize quality and performance when they test and evaluate product. They will happy to demonstrate the advanced and unique features offered by Dragster and let you experience the thrill and excitement of truly exceptional car audio.
AMPLIFIERS
The new DAA series is set to lead the scene on 2007/08 world market. Stunning sound quality, dramatic good looks, efficient and easy installation and rugged reliability, long after the warranty has expired. These are the total quality performance standards Dragster engineers set out to achieve with every amplifier. And what about the huge digital power indicator and the remote sub level control on all the models? Step ahead!
h i g h
- Mosfet power supply - Full electronic x-over, phase adjustment - Sub level remote control - Double layer PCB, SMD components - High efficiency Class D output stage - High End insulated RCA connectors - 100% aluminium heavy frame - Real time power display
Like the legendary marques of Italian motosport, Dragster amplifiers are born of a consuming passion for performance. Stunning sound quality, dramatic good looks, efficient and easy installation and rugged reliability, long after the warranty has expired. These are the Total Quality Performance standards Dragster engineers set out to achieve with every amplifier.
DAA DAA 1501 - 1 channel 1500W total RMS power
650 Watt RMS x 1-ch@4 Ohm, 950W RMS x 1-ch@2 Ohm, 1500 Watt RMS x 1-ch@1 Ohm, variable crossover 30~300 Hz LP. D class with a great efficiency and lower power consumption. A good choice for your SPL goal, as well as for a great bass system. Bridgeable by 2, remote sub level control, power display.
1
l i g h t s
channel
-
class
competition
series
DAA 2201 - 1 channel 2200W total RMS power
950 Watt RMS x 1-ch@4 Ohm, 1450W RMS x 1-ch@2 Ohm, 2200 Watt RMS x 1-ch@1 Ohm, variable crossover 30~300 Hz LP. Dragster masterpiece in D class delivers ton of power ready to compete in SPL at highest class. You only need the DWC woofers to match at the top. Of course bridgeable x 2, remote sub level control, phase shift control. Here also the digital power display on the top.
D
AMPLIFIERS
h i g h
l i g h t s
- Mosfet power supply - Full electronic x-over, bandpass function - Sub level remote control - Double layer PCB, SMD components - High current Mosfet output stage - High End insulated RCA connectors - 100% aluminium frame - Real time power display
DAA
c o m p e t i t i o n
DAA 1402 - 2 channel 400W total RMS power
s e r i e s
140W RMS x 2-ch@4 Ohm, 200W RMS x 2-ch@2 Ohm, 400W RMS x 1-ch@4 Ohm bridged, variable crossover 50~5000 Hz LP, 10~5000 HP. Do you crave power and mind-blowing sensation? The new DAA1402 punches out 200 Watt on each of its 2 channels effortlessly driving almost every system of speaker at a cost which is easy on your pocket. The active crossover can be used in high-pass to protect small drivers from excessive overheating.
2 DAA 2802 - 2 channel 800W total RMS power
channel
280W RMS x 2-ch@4 Ohm, 400W RMS x 2-ch@2 Ohm, 800W RMS x 1-ch@4 Ohm bridged, variable crossover 50~5000 Hz LP, 10~5000 HP. Here’s how to top into heady levels of distortion free power! This amplifier blasts out enough to satisfy even the most exacting of speakers and can shake the greatest of subwoofers around. With 400 Watt available at each of its two channels dizzy SPL’s (Sound Pressure Level) and earth-shattering crescendos and easily reached.
4 DAA 804 - 4 channel 480W total RMS power
80W RMS x 4-ch@4 Ohm, 120W RMS x 4-ch@2 Ohm, 240 Watt RMS x-2 ch@4 Ohm bridged, double variable crossover 50~5000 Hz LP, 10~5000 HP. The DAA804 get four channels pumping out not less than 1200 Watt RMS on each channel! Think on the savings you’ll make in terms of space, money and connections not to mention how much easier it becomes to create a great sound system. And it includes a perfect system of double crossover you can regulate by just twisting the button.
c h a n n e l
DAA 1604 - 4 channel 960W total RMS
160W RMS x 4-ch@4 Ohm, 240 Watt RMS x 4-ch@2 Ohm, 480W RMS x 2-ch@4 Ohm bridged, double variable crossover 50~5000 Hz LP, 10~5000 HP. A superb four channel at the incredible power of 200 Watt at each channel. Here’s your chance to create a sound system of a class which is rarely seen around. When you catch your first glimpse of this amplifier, 50cm long, dressed up in silver and RedRubin aluminium, you will be dump-struck with admiration. But it’s striking appearance is nothing compared to the outstanding features it embodies and high level of performance it will bring you.
AMPLIFIERS
DAB 1
1
channel
high performance series 4
The heatsink and the outer shell of these amplifiers are in two-tone grey brushed aluminium. They are built to a high quality standard and these high power amplifiers are surprising for the musical precision and the power emitted. They are ideal for creating high emotional impact systems, and also best choice for the demanding person who wants top performance. Thanks to the use of materials and technologies that are normally reserved for much more expensive products, such as SMD circuiting, stabilised power supply, total absence of loose cabling and forced ventilation, the DAB series offers high performance with an unbeatable quality/price ratio. The high power models are ideal for driving large subwoofers and for guaranteeing excellent results in fierce SPL fights.
2 DAB 1350
D Class mono power amplifier 350W RMS 250W RMS x 1-ch@4 Ohm, 350W RMS x 1-ch@2 Ohm, 40~400Hz 12dB/oct adjustable low-pass crossover, 10~50Hz adjustable subsonic filter, adjustable 18dB bass boost. The right step for powerful woofers.
chann e l
DAB 4300
2
channel
4 channel 1200W total RMS power 2/06 160W RMS x 4-ch@4 Ohm, 300W RMS x 4-ch@2 Ohm, 500W RMS x 2-ch@4 Ohm mono bridged, 12dB/oct 2-way bandpass 10~400Hz crossover, adjustable 18dB bass boost, subsonic filter from 10Hz. The logical solution for huge power and current in a first class sound system.
3
4
DAB 2200
2 channel 360W total RMS power 110W RMS x 2-ch@4 Ohm, 180W RMS x 2-ch@2 Ohm, 350W RMS x 1-ch@4 Ohm bridged, 12dB/oct 2-way bandpass 10~400Hz crossover, adjustable 18dB bass boost, subsonic filter from 10Hz. The answer for virtually every use.
6 DAB 4200
h i g h
DAB 2340
2 channel 680W total RMS power 200W RMS x 2-ch@4 Ohm, 340W RMS x 2-ch@2 Ohm, 690W RMS x 1-ch@4 Ohm mono bridged, 12dB/oct 2-way bandpass 10~400Hz crossover, adjustable 18dB bass boost, subsonic filter from 10Hz. The most powerful of the series in 2 channel.
5 5
1 2 3 4 5 6
l i g h t s
- New built-in electronic crossover - Finely brushed aluminium frame - Non-soldering low ESR connections - MosFET power supply with big energy storage - High current bipolar transistors with indipendent carbon resistors - SMD circuit board technology
4 channel 800W total RMS power 120W RMS x 4-ch@4 Ohm, 200W RMS x 4-ch@2 Ohm, 280W RMS x 2-ch@4 Ohm mono bridged, 12dB/oct 2-way bandpass 10~400Hz crossover, adjustable 18dB bass boost, subsonic filter from 10Hz. No less than 120 watts in each channel, for a great sound system.
SPEAKERS
These are super woofers that generate very high sound pressure levels and guarantee the best performance for SPL competitions. They are a perfect choice also for lovers of the extreme reproduction of low frequencies. The combination of a powerful magnetic motor and a limited weight mobile mass makes to the cone an exceptional acceleration, over 80g. The brass voice coil former with high thermal dissipation and anti-shock device guarantee maximum reliability in the most severe conditions. The electro-mechanical parameters are ideal for working in limited volume box reflex and help to reach record SPL.
1 5 2
6
3
2
1 2 3 4 5 6
4
DWC DWC 228
h i g h
extreme
300mm or 12�, 2+2 Ohm 1000W RMS, 2000W peak. SPL 4 sec. peak power 3500W
l i g h t s
- V-Styrofoam extreme excursion surround - Huge cone excursion due to high spacers - Heat cooling voice coil vents - 9 inch diameter triple magnet - Heavy duty double spider - 25mm thick steel front plate
series DWC 258
380mm or 15�, 2+2 Ohm 1200W RMS, 2400W peak. SPL 4 sec. peak power 4000 W
The most advanced and complete speaker line for Car Audio. Our products are engineered for pure musical pleasure. Dragster loudspeakers offer great performances in any type of installation. 10
11
WOOFERS
h i g h 1 2 3 4 5
DWE.1 126
DWE.1 106
These High End subwoofers are ideal for those people who want faithful reproduction of low frequencies together with a high sound pressure level. The new design of the magnetic unit and the use of new, lighter materials for mobile masses (honeycomb cones) and surrounds provide for the high level performance that can be obtained. The new voice coil that comes from the DWC models allows the subwoofers to be used safely in the most extreme situations. The new parameters make these loudspeakers suitable for all types of loading and also for SPL use.
DWE.1 156
300mm or 12”, 4 Ohm 300W RMS, 600W peak.
250mm or 10”, 4 Ohm 200W RMS, 450W peak.
380mm or 15”, 4 Ohm 400W RMS, 1000W peak.
l i g h t s
- Chrome professional connectors - Low noise heat cooling voice coil vents - Honeycomb high damped cone - Aluminium die cast basket - Anti-shock brass 3 inch double voice coil. Huge magnet with chrome plates
DWE. 1
comp etition
series
4 2
2 5 1
4 h i g h
1
3
12
DWH. 1 DWH.1 229
300 mm or 12”, 2+2 Ohm, 600W RMS, 1200W peak
h i g h
te c h
s e r i e s
DWH.1 259
380 mm or 15”, 2+2 Ohm, 800W RMS, 1600W peak
1 2 3 4 5
-
3
l i g h t s
Non pressed cellulose cone Long life voice coil leads Progressive flat NomexTM spider High quality push connectors Double layer foam laminated surround
5
This well-known series of Dragster loudspeakers comes from a winning idea, that of joining powerful magnetic motors with heavy, damped cones, in order to permit the reproduction of deep, non-distorted low frequencies in small loads. These special parameters make it possible to use them in sealed boxes, obtaining a fast, damped reproduction and also in vented boxes for maximum SPL performance. The non pressed pure cellulose cone, the double layer high excursion, Styrofoam surround, the voice coil former in Kapton and the die-cast aluminium, scratchproof, aerodynamic basket make these subwoofers, ideal for most applications. In particular, the DWE have won the praise of the specialised press for their excellent performance in their category.
13
WOOFERS
DWA
high performance series
The subwoofers in the DWA series guarantee high quality performance and sound pressure, setting new price/quality levels. The special solutions used, such as powerful magnets, thin air gap and light pure cellulose cones provide for an increase in sensitivity, precious dB, that allow higher volumes using the same amount of power. The components used also belong to other, higher classes: large Styrofoam surrounds, back plates shaped for high excursions, super-damped enamel baskets, Kapton voice coil formers and NomexTM spiders. The electro-mechanical parameters allow the subwoofers to be used in the most varied configurations.
AluMylar dome with Trivent rear chamber, Neodymium magnet, aluminium former, ferrofluid, non-loading baffle, phase ring, Dragster competition high-end tweeter.
h i g h 1 2 3 4 5
l i g h t s h i g h
- Pure cellulose cone - Styrofoam big escursion surround - Progressive flat NomexTM spider - Highly damped steel chassis - Huge vented magnetic motor
DTH 121.1
19mm or 3/4”, 80W RMS, 160W peak with proper crossover, frequency range from 1.8 to 25 kHz, sensitivity 91dB. Included in the series DCC 582, DS, DSE, DC.
1 2 3 4 5
-
l i g h t s
Silk dome High frequency phase ring Trivent rear chamber 50mm silk dome Non-loading baffle
2 1
1
DWA 105
250mm or 10”, 4 Ohm, 125W RMS, 250W peak
2 4 DWA 125
300mm or 12”, 4 Ohm, 150W RMS, 300W peak
5 3
TWEETERS & MIDRANGE
DTH 125.1
25mm or 1”, 120W RMS, 240W peak with proper crossover, frequency range from 1.2 to 24 kHz, sensitivity 91dB. Included in the series DCC682, DSK and DSZ.
5 3 5
DMD 100
A dome midrange to complete a 3-way speaker system 50mm or 2” voice coil, silk dome impregnated with epoxy resin, Neodymium magnet with ferrofluid injected in-depth, KaptonTM former, “Star” profile multiple magnet, resonant back chamber, power 120W RMS and 300W peak with proper crossover, frequency range 450/6500 Hz, sensitivity 90dB.
2
4 DWA 155
380mm or 15”, 4 Ohm, 250W RMS, 500W peak
14
15
DEH
ENCLOSURES
DER The woofer enclosures are today the modern solution to get bass sounds immediately without complicated and expensive structures. The ones offered by Dragster produce distortion-free sound pressure level with deep, damped reproduction of low frequencies, ideal for completing any in-car audio system. Available in two common configuration, reflex (DER series) and bandpass (DEH series) enclosures, they use the characteristics of the loudspeakers used to the best advantage, providing a valid, fast alternative to the use of loose woofers.
DER 210 (DER 210.A)
Reflex subwoofer system, single 250mm or 10” woofer, max power 200W RMS, pick 400W, high flow Triangular port (2) dimension WxHxD: 400 (16”)x320(13”)x300(12”) The version DER 210.A includes a Class D built-in amplifier power RMS 160W
6 DEH 221
3
1
h i g h 1 2 3 4 5
-
l i g h t s
2
DER 212 (DER 212.A)
DER dedicated woofer High excursion design surround High flows triangular ports Heavy duty carpet 3/4" thick MDF wood cabinet
Reflex subwoofer system, single 300mm or 12” woofer, max power 250W RMS, pick 500W, high flow Triangular port (2), dimension WxHxD: 450 (18”)x380(15”)x400(16”) the version DER 212.A includes a Class D built-in amplifier power RMS 160W
5
DEH 251
4
1
DER 321
Reflex subwoofer system, single 300mm or 12” woofer, max power 300W RMS, pick 600W, high flow Triangular port (2) dimension WxHxD: 480 (19”)x380(15”)x440(17.5”)
3 16
4th order bandpass subwoofer system, single 380mm or 15” woofer with 400W RMS, 800W peak, finished in Dragster style with red upper face, transparent window and high flow TriAngular ports. Dimensions (WxHxD) : 545mm (21-1/2”) x 450mm (17-3/4”) x 480mm (19”)
5
2
4
4th order bandpass subwoofer system, single 300mm or 12” woofer with 300W RMS, 600W peak, finished in Dragster style with red upper face, transparent window and high flow TriAngular ports. Dimensions (WxHxD) : 480mm (19”) x 380mm (15”) x 440mm (17-1/2”)
h i g h 1 2 3 4 5 6
-
l i g h t s
Shiny plexiglass wall DEH dedicated drivers High excursion design surround 4th order bandpass loading High flow vents = huge SPL 3/4" thick MDF wood cabinet
DEH 222
4th order bandpass subwoofer system, double 300mm or 12” woofer with 600W RMS, 1200W peak, finished in Dragster style with red upper face, transparent window and high flow TriAngular ports. Dimensions (WxHxD) : 873mm (34-3/8”) x 410mm (16-1/8”) x 490mm (19-1/2”)
17
SYSTEMS
These two-way kits are the top Dragster technological expression in multi-way systems for the medium-high frequencies. They have been largely renewed compared to the previous DSC versions, and are made up of midbasses with fiberglass cone and a particular high-dispersion, cone-shaped phase-plug and the Extreme Series tweeter DTH 125.1. The kit is completed by a new passive filter with metallized polypropylene capacitors and air wound inductances that equalises and directs the two drivers for the reproduction of dynamic, transparent sound. This is the perfect choice for the modern user and for quality sound competitions. In this new version you can install the tweeter as coaxial mode, saving space and time of installation, having a great result. The kits also include grilles and components for installation.
h i g h
You can acquire the pair of DMC 681 mid-bass separately, as well as the tweeter DTH 121.1, 125.1.
h i g h
2
1
1 2 3 4
1 2 3 4
l i g h t s
1
l i g h t s
- Graphite charged PP cone - Santoprene™ low distorsion surround - 2" Aluminium voice coil - Nomex red spider
4
- Separate component mode with phase plug - Light exponential fiberglass cone - SantopreneTM low distorsion surround - Coaxial mode with tweeter
DSK. 1
competition series
3 3
4
2
DCC. 1
DCC.1 682
2-way 165mm or 6.5”, 90W RMS, 180W peak.
18
DSK 572
h i g h
te c h
s e r i e s
2-way 130mm or 5.25”, 120W RMS, 240W peak.
coaxial or separate component m o d e
DCC 582
2-way 130mm or 5.25”, 70W RMS, 140W peak.
The two-way DSK systems are the expression of a project where power and quality are in pole position. The mobile aluminium 50mm (2”) voice coil, the large, ultra-straight magnetic circuit and the hard polypropylene cone loaded with graphite make musical reproduction extremely accurate and also provide a maximum SPL that is typical of much larger loudspeakers. The unusual ability to reproduce low frequencies allows the musical signal to be reproduced in an exceptionally realistic way, with high emotional impact. The best choice for car hi-fi competitions and for anyone who wants sound at high volume while maintaining excellent quality. The kit includes the Extreme Series tweeter DTH 125, a High End linear phase passive filter, grilles and assembly components.
DSK 672
2-way 165mm or 6.5”, 160W RMS, 320W peak.
19
SYSTEMS
Due to the reduced installation depth and minimum weight, these high quality two-way kits solve all installation problems without having to give up on any sound quality. The woofer's special magnetic circuit made entirely in neodymium ensures the same general performance as the traditional ones made in ferrite and greater linearity in the magnetic field. The silk dome tweeter DTH 125.1 from the Extreme Series and a passive filter with high quality components especially for this series increase the systems’ value, which is already well-known and appreciated. Except for DSZ 852 grilles and installation components are included.
3
You can acquire the pair of DMZ 651 and DMZ 851 mid-basses separately, as well as the tweeter DTH 125.1.
h i g h
1
1 2 3 4 5 6
2
l i g h t s
- Pure cellulose cone with exponential profile - Fiberglass and resine composite frame - Low profile high power neodymium magnet - Low tolerance ceramic resistors - Air wound inductances - Metallized polypropylene capacitors
6
DSZ
DSZ 552
z-neo
4
series
2-way 130mm or 5.25”, 70W RMS, 140W peak.
20
5
DSZ 652
2-way 165mm or 6.5”, 90W RMS, 180W peak.
DSZ 852
2-way 200mm or 8”, 100W RMS, 200W peak.
21
SYSTEMS
These two-way loudspeaker systems use Dragster technological expertise from the High End lines, offering extremely high sound quality at reasonable prices, therefore providing an ideal choice for anyone who wants to build a high performance system without the commitment and cost of higher level products. The graphite-fibre injected polypropylene cones and the new DTH 121.1 silk dome tweeter provide for a medium-high faithful, transparent range. The midwoofer’s special parameters guarantee a fast, dynamic mid-bass range. The kit includes 12 dB/oct crossovers filter with level adjustment for the tweeters, grilles and installation components.
3
You can acquire the pair of DM 631 mid-bass separately, as well as the tweeter DTH 121.1.
h i g h 1 2 3 4
l i g h t s
- New carbon injected cone with a smart new white/red logo - Conical shape phase plug - Santoprene™ surround - Linear Nomex red spider
1
h i g h 1 2 3
DSE. 1
3 2
DS. 1
hig h
p e r fo r m a n c e
l i g h t s
- AluMylar exponential cone with new white/red logo - New dust cap for better mid frequencies response - New custom grilles on all the series
classic
4 s e r i e s
2-way 130mm or 5.25”, 50W RMS, 100W peak.
2-way 100mm or 4”, 40W RMS, 80W peak.
22
DS 532
2
series
DSE 562
DS 432
1
2-way 130mm or 5.25”, 50W RMS, 100W peak.
DS 632
2-way 165mm or 6.5”, 60W RMS, 120W peak.
DSE 662
2-way 165mm or 6.5”, 60W RMS, 120W peak.
The two-way DSE systems provide the possibility of fitting loudspeakers into a car that does not have any or of replacing the standard ones. For a small cost, the user manages to obtain a sound that is typical of Dragster. The component materials used, similar to the higher level series, such as the AluMylar cone and the new tweeter DTH 121.1 make sound reproduction accurate and enjoyable, that can involve even the most distracted listener. The high efficiency allows full use even with just an amplified car radio. The kit includes passive filters, new custom grilles and installation components.
23
COAXIALS
DC. 1
DCE
high performance series
series
1 2
DC 402
Full range 100mm or 4”, 35W RMS, 100W peak.
DCE 312
Full range 87mm or 3,5”, 20W RMS, 60W peak.
h i g h
4
1 2 3 4
3 DC 502
Full range 130mm or 5.25”, 40W RMS, 120W peak.
DC 602
Full range 165mm or 6.5”, 50W RMS, 150W peak.
DC 903
Full range three way 150x230mm or 6”x9”, 60W RMS, 180W peak.
Full range 100mm or 4”, 20W RMS, 60W peak.
DCE 512
Full range 130mm or 5.25”, 30W RMS, 75W peak.
- New AluMylar diaphgrams - Santoprene™ surround - New DTH 121/125 silk dome tweeters - Nomex red spider
This series of coaxials, which improves year by year, is one of the most popular on the market, and is close to perfection. The optimal choice for those who want top performance from two-way loud speakers in coaxial configuration. Each item, made up of two precious drivers designed to be used separately and then mounted coaxially, (or tri-axially for the three-way DC 903), accurately reproduces the musical sounds. Although they are suitable for working with amplified car radios, the speakers reach maximum performance when connected to separate amplifiers. The kit includes metal grilles and installation components.
DCM
DCM 600
DCE 412
l i g h t s
DCE 462
DCE 612
Full range 165mm or 6.5”, 40W RMS, 90W peak.
Full range 100x150mm or 4”x6”, 30W RMS, 75W peak
marine series
Dragster offers a coaxial speaker for outdoor environments such as boats, porches and all the locations with a high moisture level. DCM 600 is a 150mm or 6” full range coaxial speaker built with material capable of withstanding and reproducing sound in very damp environments, built without parts that will deteriorate in the above conditions.
24
classic
full range 150 mm or 6”, 50W RMS, 125W peak.
DCE 4102
Full range 100x250mm or 4”x10”, 40W RMS, 90W peak.
Much appreciated for their sound quality and reliability, the DCE series coaxials are the right choice for anyone who wants to install an integrated system without foregoing Dragster sound quality, while not spending too much. The mylar tweeters and the polypropylene cones come directly from the high quality multi-way systems on which Dragster has built its own reputation. Except for DCE462, 4102, and 572, all the kits include a pair of custom grilles and installation accessories.
DCE 572
Full range 130x180mm or 5”x7”, 40W RMS, 90W peak.
DCE 914
Full range four way 150x230mm or 6”x9”, 50W RMS, 120W peak.
25
ACCESSORIES
“The power inside” is the most modern and powerful line of car audio accessories adding more power, performance and good looks to your system and giving your value for your money. Install the Dragster components by yourself or ask your daler in order to create a great system with the best quality. “The power inside” consists of power cables, speaker wires, inteconnects, battery connectors, fuse holders, several types of connectors and the power caps to boost your amplifiers under any conditions. The Dragster are made of solid brass, pure copper and aluminium. The cables are insulated by transparent dielectric jackets. The contacts are gold plated while the finish of all the models is platinum plated for the best combination of power, reliability and good looks. The prices? They’ll always be a nice surprise! Trust in Dragster always!
26
capacitors
DP 703
The attractive transparent cover of this power capacitor shelters a digital voltmeter and four ring terminals which are supplied with the product. 20-24 Volt surge.
DP 702
Performance at 1 Farad and safety at the top level in Dragster’s entry level with voltage digital control too. 16-20 Volt surge.
distribution blocks
DP 733
AGU Positive & Negative Distribution Block Platinum Plated, input 2+2x20mmq or 4 AWG, output 4+4x8mmq or 8 AWG.
DP 735
Distribution Block Platinum Plated, input 1x20mmq or 4 AWG, output 4x8mmq or 8 AWG.
DP 740
AGU Fuseholder Platinum Plated, input and output 20/8mmq or 4/8 AWG.
27
ACCESSORIES
power & ground wires
install kits
All Dragster wires are encased in virgin dielectric jackets resistant to gasoline and chemical. These power and ground wires are made in specially twisted bundles that ensure huge current delivery to your audio system.
DP KIT.4
Competition install kit with 20mmq or 4 AWG power & ground wire including: DP 404.R 6 meter with ring terminal DP 404.C 1.5 meter with ring terminal DP 465.R 1 pr DP 425.R 12 meter DP 753 1 pr DP 751 1 pr DP 740 AGU fuseholder + fuse
power & ground wire 35mmq or 2 AWG, tinned copper, spool 20m or 67 feet DP 402.B Flexible wire in Blue Jacket DP 402.C Flexible wire in Clear Jacket DP 402.R Flexible wire in Red Jacket power & ground wire 20mmq or 4 AWG, tinned copper, spool 30m or 100 feet DP 404.B Flexible wire in Blue Jacket DP 404.C Flexible wire in Clear Jacket DP 404.R Flexible wire in Red Jacket
connectors and cable ties
power & ground wire 8mmq or 8 AWG, tinned copper, spool 60m or 200 feet DP 408.B Flexible wire in Blue Jacket DP 408.C Flexible wire in Clear Jacket DP 408.R Flexible wire in Red Jacket
DP KIT.8
High Performace install kit with 8mmq or 8 AWG spower & ground wire including: DP 408.R 6 meter with ring terminal DP 408.C 1.5 meter with ring terminal DP 455.B 1 pr DP 415.B 12 meter DP 752 1 pr DP 749 1 pr DP 740 AGU fuseholder + fuse
speakers wires Top grade speaker cable that is available in the three most common sizes. Suitable for every speaker application.
connectors and cable ties
speaker wire 4mmq or 12 AWG, spool 75m or 250 feet DP 440.C Flexible wire in Clear Jacket speaker wire 2.5mmq or 14 AWG, spool 100m or 330 feet DP 425.R Flexible wire in Red Jacket Speaker wire 1.5mmq or 16 AWG, spool 150m or 500 feet DP 415.B Flexible wire in Blue Jacket
battery terminals
signal cables The importance of using top quality interconnections in any audio or video system cannot be underlined enough. The purity of a signal must be retained along its path to ensure extraneous and other noises are not amplified along with the original signal. This requires that the material and manufacturing be of the highest standard. Dragster follows this concept for the best in sound quality.
Competition Series
Double shield, platinum plug DP 711, RED jacket, remote wire included. DP 461.R 1m or 3 feet DP 463.R 3m or 10 feet DP 465.R 5m or 16 feet DP 466.R 6m or 20 feet DP 468.R Y adapter 1 male to 2 female DP 469.R Y adapter 1 female to 2 male
DP 722
Battery Positive Terminal with Negative adaptor, platinum plated, 1x35mmq or 2 AWG and 2x8mmq or 8 AWG outputs, includes plastic cover.
DP 724
Battery Positive Terminal with Negative adaptor, platinum plated, 1x35 mmq or 2 AWG, and 1x4mmq or 4 AWG outputs and 2x8mmq or 8 AWG, includes plastic cover.
DP 726
Pair of Positive and Negative Battery Terminals, platinum plated, DIGITAL DISPLAY showing the battery voltage, 1x35mmq or 2 AWG and 2x8mmq or 8 AWG outputs, includes plastic cover.
connectors & fuses
High Performance Series
Double shield, ABS plug, CLEAR jacket, remote wire included. DP 471.C 1m or 3 feet DP 473.C 3m or 10 feet DP 475.C 5m or 16 feet DP 476.C 6m or 20 feet DP 478.C Y adapter 1 male to 2 female DP 479.C Y adapter 1 female to 2 male
Classic Series
28
Twisted pair, ABS plug, BLUE jacket, remote wire included. DP 451.B 1m or 3 feet DP 453.B 3m or 10 feet DP 455.B 5m or 16 feet DP 455.BK 5m or 16 feet, 25 pairs DP 456.B 6m or 20 feet DP 458.B Y adapter 1 male to 2 female DP 459.B Y adapter 1 female to 2 male
DP 711
(4) RCA Platinum Plated Plug
DP 749
(4) Gold Plated Ring Terminal 8mmq or 8 AWG – 2 pairs
DP 750
(50) Gold Plated Ring Terminal 8mmq or 8 AWG – 25 pairs in bulk
DP 751
(4) Gold Plated Ring Terminal 20mmq or 4 AWG – 2 pairs
DP 752
(50) Gold Plated Spades 8mmq or 8 AWG – 25 pairs in bulk
DP 753
(4) Gold Plated Spades 4mmq or 4 AWG – 2 pairs
DP 773-774-775-776 777-778 AGU Fuses rated at 30, 40, 50, 60, 70, 80 Amps value. 5 pcs in one blister.
DP 781.0-781.5 782.0
ANL Fuse rated at 100, 150, 200 Amps value. 1 pc each blister.
29
d rag ster
crew
SPECS DAA 1501 DAA 2201 DAA 1402 DAA 2802 DAA 804 DAA 1604 DAB 1350 DAB 2200 DAB 2340 DAB 4200 DAB 4300 power @ 4 Ohm (0.05 THD) W RMS 650x1 950x1 140x2 280x2 80x4 160x4 250x1 120x2 200x2 120x4 160x4 power @ 2 Ohm (0.05 THD) W RMS 950x1 1450x1 200x2 400x2 120x4 200x4 350x1 180x2 340x2 200x4 300x4 power @ 1 Ohm (0.1 THD) W RMS 1450x1 2200x1 - - - - - - - - - power @ 4 Ohm bridge (0.08 THD) W RMS Bridgeable by pair 400x1 800x1 240x2 400x2 - 350x1 690x1 280x2 500x2 TDH @ max power % 0.07 0.07 0.04 0.04 0.04 0.04 0.07 0.05 0.04 0.05 0.04 frequency response -3 dB Hz 5-300k 5-300k 5-100k 5-100k 5-100k 5-100k 10-400k 10-20k 10-20k 10-20k 10-20k signal/noise Weight A dB >106 >108 >103 >103 >100 >100 >100 >100 >103 >103 >103 input sensitivity V 0.12-12 0.12-13 0.12-14 0.12-15 0.12-16 0.12-17 0.2-6 0.2-7 0.2-8 0.2-9 0.2-10 max current drawn (4 Ohm) A 62 94 28 48 30 50 12 20 38 36 60 suggested fuse A 70 100 30 50 35 60 15 25 40 40 80 HP crossover frequency Hz none none 10-5000 10-5000 10-5000 (double) 10-5000 (double) - 10-400 10-400 10-400 10-400 LP crossover frequency Hz 30-300 30-300 30-5000 30-5000 30-5000 (double) 30-5000 (double) 40-400 40-400 40-400 40-400 40-400 crossover slope dB/oct. 12 12 12 12 12 12 12 12 12 12 12 bass boost @45 Hz 0-18dB 0-18dB 0-18dB 0-18dB 0-18dB (double) 0-18dB (double) 0-18 0-18 0-18 0-18 0-18 subsonic filter Hz 10-50 10-50 10-HP filter 10-HP filter 10-HP filter 10-HP filter 10-50 10-HP filter 10-HP filter 10-HP filter 10-HP filter sub level remote control YES YES YES YES YES rear channels YES rear channels - - - - dimension mm 320x60x300 480x60x300 280x60x300 320x60x300 330x60x300 540x60x300 266x56x259 295x56x259 500x56x259 402x56x259 650x56x259 dimension inch 12-5/8x2-3/8x12 19x2-3/8x12 11x2-3/8x12 12-5/8x2-3/8x12 13x2-3/8x12 19x2-3/8x12 10-1/2x2x10-1/2 11-5/8x2x10-1/2 19-5/8x2x10-1/2 15-7/8x2x10-1/2 25-1/2x2x10-1/2 weight kg 6.5 8 3.5 5.3 4 6 2.2 2.2 5.2 3.7 6.2 WOOFERS DWC 228 DWC 258 DWH 229.1 DWH 259.1 DWE 106.1 DWE 126.1 DWE 156.1 DWA 105 DWA 125 DWA 155 diameter mm (inch) 300 (12) 380 (15) 300 (12) 380 (15) 250 (10) 300 (12) 380 (15) 250 (10) 300 (12) 380 (15) mounting depth mm (inch) 218 (8-1/2) 231 (9) 171 (6-5/8) 177 (7) 115 (4-3/8) 126 (5) 166 (6-1/2) 112 (4-3/8) 132 (5-1/4) 177 (7) RMS power W 500+500 600+600 300+300 400+400 200 300 400 125 150 250 max power W 1000+1000 1200+1200 600+600 800+800 450 600 1000 250 300 500 impedance Ohm 2+2 2+2 2+2 2+2 4 4 4 4 4 4 voice coil diameter mm (inch) 75 (3) 75 (3) 75 (3) 75 (3) 50 (2) 50 (2) 65 (2-1/2) 38 (1-1/2) 38 (1-1/2) 50 (2) sensitivity dB 2.83 V@1m 89.5 91.2 90.5 92.3 89.9 93 93.9 92.7 93.3 95.8 Fs Hz 32 32 30 27 31 24 24 43 35 30 Re Ohm 3.8 3.6 3.2 3.3 3.7 3.1 3.8 3.5 3.4 3.7 Qms 6.9 6.2 6.75 6.3 17 14 12 10.6 10.6 10.4 10.0 Qes 0.47 0.47 0.54 0.45 0.42 0.31 0.32 0.68 0.61 0.44 0.44 Qts 0.44 0.44 0.5 0.42 0.4 0.3 0.31 0.6 0.58 0.42 0.42 Vas (D) lt 35 92 49 97 41 114 172 45 108 185 Xmax mm (inch) ±20 (3/4) ±20 (3/4) ±8.5 (3/8) ±8.5 (3/8) ±8.5 (3/8) ±8.5 (3/8) ±8.5 (3/8) ±6 (1/4) ±7 (9/32) ±7 (9/32) BANDPASS enclosure internal volume lt (cu. feet) 40 (1.5) 75 (2.8) 40 (1.5) 57 (2) 24 (0.8) 38 (1.3) 56 (2) 35 (1.2) 50 (1.7) 70 (2.5) tube lenght mm (inch) 360 (14-1/5) 42 (17) 38 (15) 35 (13.5) 31 (12) 38 (15) 2x35 (13.5) 21 (8) 34 (13-2/5) 38 (14-3/5) tube inner diameter mm (inch) 2x76 (2x3) 2x100 (2x4) 100 (4) 2x76 (2x3) 76 (3) 10 (4) 2x76 (2x3) 76 (3) 10 (4) 125 (5) 75 Hz SPL port diameter/lenght mm (inch) 175 (7)/16 (6.25) 230 (9)/10 (4) 150 (6)/110 (4-3/8) 19 (7.5-1.5)/10 (4) sealed enclosure internal volume lt (cu. feet) 28 (1) 40 (1.5) 32 (1-1/5”) 37 (1.3) 15 (0.5) 24 (0.8) 41 (1.4) 29 (1) 43 (1.5) 55 (1.9) Woofer Enclosures DEH 221 DEH 222 DEH 251 DER 210 DER 210.A DER 212 DER 212.A DER 321 woofer dimension mm (inch) 1x300 (12) 2x300 (12) 1x380 (15) 1x250 (10) 1x250 (10) 1x300 (12) 1x300 (12) 1x300 (12) continuous power W 300 600 400 200 200 250 250 300 max power W 600 1200 800 400 400 500 500 600 built-in Class D amplifier W RMS - - - - 160 - 160 impedance Ohm 4 4+4 4 4 4 4 4 4 dimension WxHxD (mm) 480x380x440 873x410x490 545x450x480 400x320x300 400x320x300 450x380x400 450x380x400 480x380x440 dimension WxHxD (inch) 19x15x17.5 35x16x19.5 21.5x18x19 16x13x12 16x13x12 18x15x16 18x15x16 19x15x17.5 AmpLIFIERS
SHIRT.WH
SHIRT.BK
COMPONENT SYSTEMS
diameter mid-bass mounting depth midbass voice coil of tweeter power RMS max power impedance frequency response sensitivity crossover slope tweeter attenuation
mm (inch) mm (inch) mm (inch) W W Ohm Hz dB dB/oct. dB
DCC 582.1 130 (5.25) 61 (2-3/8) 19 (3/4) 70 140 4 65-25k 91 12/12 0/-3/-6
DCC 682.1 165 (6.5) 73 (2-7/8) 25 (1) 90 180 4 60-24k 91.5 12/12 0/-3/-6
DSK 572.1 130 (5.25) 71 (2-7/8) 25 (1) 140 280 4 55-24k 87.9 0/12 0/-3/-6
DSK 672.1 165 (6.5) 71 (2-7/8) 25 (1) 160 320 4 55-24k 92.2 12/12 0/-3/-6
DSZ 552 130 (5.25) 31 (1-1/4) 32 (1-1/4) 70 140 4 75-22k 90 12/12 0/-3/-6
DSZ 652 165 (6.5) 35 (1-3/8) 38 (1-1/2) 90 180 4 65-22k 91 12/12 0/-3/-6
DC 402.1 DC 502.1 DC 602.1 DC 903.1 DCM 600 diameter mm (inch) 100 (4) 130 (5.25) 165 (6.5) 150x230 (6x9) 160 (6-1/3) mounting depth mm (inch) 46 (1-7/8) 50 (2) 66 (2-5/8) 74 (3) 60 (2-3/8) power RMS W 35 40 50 60 50 max power W 100 120 150 180 100 impedance Ohm 4 4 4 4 4 frequency response Hz 80-23k 70-23k 50-23k 50-23k 60-20k sensitivity dB 90 90 91 93 90
COAXIALS
CAP.R
COAXIALS
CAP.X 30
diameter mounting depth power RMS max power impedance frequency response sensitivity
mm (inch) mm (inch) W W Ohm Hz dB
DCE 312 87 (3.5) 36 (1-1/2) 20 60 4 95-20k 88
DCE 412 100 (4) 43 (1-5/8) 20 60 4 85-20k 88
DCE 512 130 (5.25) 56 (2) 30 75 4 70-20k 90
DCE 612 165 (6.5) 56 (2) 40 90 4 60-20k 90
DCE 6012 160 (6) 56 (2) 40 90 4 60-20k 90
DCE 4102 100x250 (4x10) 63 (2-2/8) 40 90 4 55-20k 90
DSZ 852 200 (8) 40 (1-1/2) 38 (1-1/2) 100 200 4 50-22k 92.5 12/12 0/-3/-6
DS 432.1 100 (4) 46 (1-7/8) 19 (3/4) 50 100 4 80-21k 90 12/12 0/-3
TWEETERS/MIDS
voice coil mounting depth power RMS max power impedance frequency response sensitivity rec. crossover DCE 462 100x150 (4x6) 46 (1-7/8) 30 75 4 70-20k 90
mm (inch) mm (inch) W W Ohm Hz dB Hz DCE 572 130x180 (5x7) 64 (2-5/8) 40 90 4 50-20k 90
DS 532.1 130 (5.25) 46 (1-7/8) 19 (3/4) 60 120 4 70-21k 90 12/12 0/-3
DS 632.1 165 (6.5) 66 (2-5/8) 19 (3/4) 75 150 4 50-21k 90 12/12 0/-3
DSE 562.1 130 (5.25) 56 (2) 19 (3/4) 50 100 4 75-21k 90 6 -
DTH 121.1 19 (3/4) 10 (2/5) 80 150 4 1.8k-25k 91 3.5k
DTH 125.1 25 (1) 17 (2/3) 120 240 4 1.2k-24k 91 2.8k
DMD 100 50 (2) 35 (1-3/8) 160 300 4 500-9.5k 92 900 / 6k
DSE 662.1 165 (6.5) 66 (2-5/8) 19 (3/4) 60 120 4 60-21k 90.7 6 -
DCE 914 150x230 (6x9) 75 (3) 50 120 4 50-20k 90
31
info@dragsteraudioart.com
w w w. d r a g s t e r a u d i o a r t . c o m