How to Run the Assessment Test 1/4 How do I run the Drive Assessment Test? Start HP StorageWorks Library and Tape Tools (L&TT)
Once the hardware scan has completed, select (by clicking on) the drive that you want to run the Assessment Test on
How to Run the Assessment Test 2/4 When the Drive’s identity screen is shown, select the Test Button on the Toolbar (1) Then select the device from the list shown (2) Next, check the ‘Test Group’ setting, and ensure that ‘LTO Drive Assessment Test’ is selected (if not, click on the drop down arrow and search through the list) (3)
1 2
Leave the test options as default
3
Start the test (should take approx. 15 minute) (4) Run the Drive Assessment test with a known good (preferably new) tape. Leave the options as default
4
How to Run the Assessment Test
3/4
This test measures the health of the drive and provides recommendations if issues are found. If the test passes, the drive is OK. If the test fails with a good data cartridge, then the drive needs attention.