Architecture Portfolio_Rakshith by Rakshith raghu

DYSTOPIA - UNDERGRADUATE THESIS

Pg 3

DYSTOPIA - UNDERGRADUATE THESIS

Pg 4

DYSTOPIA - UNDERGRADUATE THESIS

Pg 5

DYSTOPIA - UNDERGRADUATE THESIS

Pg 6

DYSTOPIA - UNDERGRADUATE THESIS

Pg 7

DYSTOPIA - UNDERGRADUATE THESIS

Pg 8

THE EXTENSION - URBAN DESIGN

Pg 9

U HR EB AENX TDEENSSI G T I ONN 7-T HU RS BEAMNE SDTEESRI G N

Pg 10

THE EXTENSION - URBAN DESIGN

Pg 11

THE EXTENSION - URBAN DESIGN

Pg 12

U HR EB AENX TDEENSSI G T I ONN 7-T HU RS BEA MNE SDTEESRI G N

Pg 13

BODHA - CAMPUS DESIGN

Pg 14

BODHA - CAMPUS DESIGN

Pg 15

BODHA - CAMPUS DESIGN

Pg 16

FRONTIER 47 - COMPETITION

Pg 17

FRONTIER 47 - COMPETITION

Pg 18

FRONTIER 47 - COMPETITION

Pg 19

PROFESSIONAL TRAINING - COLLECTIVE PROJECT

Pg 20

14900 149001 TYPE TYPE 1

4 4

PLINTH PLINTH BEAM BEAM ASAS PROVIDED PROVIDED BYBY STRUCTURAL STRUCTURAL CONSULTANT. CONSULTANT.

D6 D6

SECTION SECTION

1:50 1:50

A-512.3 A-512.3

230 230

10mm DIA MS VERTICAL 10mm DIA MS VERTICAL

LAID TO SLOPE W/W/ 5mm DRIP LAID TO SLOPE 5mm DRIP

ALIGN

MAIL SLOT ON THE OUTSIDE.

400 25

365 5

Rey

ALIGN

190

200

5mm THK MS SHUTTER AS SPECIFIED BY ARCHITECT.

KEY LOCKING MECHANISM FOR THE MAILBOX TO BE DISCUSSED WITH FABRICATOR PRIOR TO EXECUTION. 5mm THK MS SHUTTER AS SPECIFIED BY ARCHITECT.

HEIGHT TO BE VERIFIED AT SITE

5mm THK MS PLATES TO BE FLUSH W/ WALL SURFACE.

GATE ELEVATION

5mm THK MS DUMMY PLATE RECESSED BY 5mm FROM WALL SURFACE.

MAIL SLOT ON THE OUTSIDE.

400 5

40 7

150

10mm X 60mm M.S

230

370

ELEVATION

A-514

1:25

KEY LOCKING MECHANISM FOR THE MAILBOX TO BE DISCUSSED WITH FABRICATOR

Pg 21 5

DOOR BELL AS SPECIFIED BY ARCHITECT, RECESSED BY 5mm FROM WALL SURFACE. TO ALIGN W/ DUMMY PLATE.

PROFESSIONAL TRAINING - COLLECTIVE PROJECT / BLOCK HOUSE

1:25

200

MAIL SLOT ON THE OUTSIDE.

STONE PAVING AS SPECIFIED BY ARCHITECT. 7

100 280

ALIGN

PARKING LVL +75MM FFL 10mm X 60mm M.S FRAME RUNNING ON ALL FOUR SIDES, PAINTED AS SPECIFIED BY ARCHITECT.

20 170

1895

MAIL SLOT.

A-514

5 7

1050 10

DRAIN COVER AS REQUIRED BY CONTRACTOR.

OUTSIDE

ELEVATION

200

15 15

230

KEY LOCKING MECHANISM FOR THE C a s a MAILBOX TO BE DISCUSSED WITH FABRICATOR PRIOR TO EXECUTION.

100

445

ALIGN

20 50

44 2973 APS

200

190

GROUND FLOOR 600MM FFL DECK LVL +520MM FFL

400

PAINTED AS SPECIFIED BY ARCHITECT.

ALIGN

1315

200

400

CUSTOM INTERNAL TOWER BOLT TO BE DISCUSSED WITH FABRICATOR

400

5mm SPACING.

PARKING LVL +75MM FFL

ALIGN

A-514

NO. OF HINGES AND SPACING TO BE DISCUSSED WITH FABRICATOR

TYPE TYPE 4 4

RECESSED BY 5mm FROM WALL SURFACE.

5mm THK MS PLATES TO BE FLUSH W/ WALL SURFACE.

MAILBOX DETAIL PLAN

10mm THK M.S PLATE, PAINTED AS SPECIFIED BY ARCHITECT.

40mm THK STONE PAVERS AS SPECIFIED BY ARCHITECT

25 M.S FLATS 5 10mm X 50mm 365

GROUND FLOOR 600MM FFL DECK LVL +520MM FFL

BOTTOM OF 6TH COURSE

NO. OF HINGES AND SPACING TO BE DISCUSSED WITH FABRICATOR

400 X 230 X 200mm EXPOSED MUD CONCRETE BLOCKWORK 400 W/ 7mm MORTAR JOINT.

1050/R

1760/R

5mm SPACING. MAILBOX DETAILS AS SPECIFIED. REFER-----

HEIGHT TO BE VERIFIED AT SITE

400 X 230 X 200mm EXPOSED MUD CONCRETE BLOCKWORK W/ 7mm MORTAR JOINT. 10mm THK M.S PLATE PAINTED AS SPECIFIED BY ARCHITECT.

200

20mm THK STONE COPING LAID TO SLOPE AS SPECIFIED BY ARCHITECT MAILBOX DETAILS AS SPECIFIED. REFER-----

ALIGN

SIDE HUNG

A-514

1050

ALIGN

428 APS

20mm THK STONE COPING LAID TO SLOPE AS SPECIFIED BY ARCHITECT

2973 APS

1257/R

1895

365

INSIDE

TYPE TYPE 3 3

1:25 1:25

A-512.3 A-512.3

BOTTOM OF 7TH COURSE

10 10

CONSULTANT. CONSULTANT.

ALIGN

WALL TYPE TYPEDES LEGEND LEGENDWALL D

TYPE TYPE 1 1MS 1800mm 1800mm HIGH HIGH COMPOUND COMPOUND WALL 5mm THKWALL MS PLATES TO BE 5mm THK 25 FINISHED WITH WITH STONE STONE COPING COPING FLUSH W/ WALL SURFACE. SHUTTER AS FINISHED SPECIFIED BY TYPE TYPE 2 2 3000mm 3000mm HIGH HIGH WALL WALL SUPPORTING SUPPORTING 5mm THK MS SHUTTER AS ARCHITECT. PLANTER PLANTER ABOVE ABOVE SPECIFIED BY ARCHITECT

TYPICAL TYPICALTYPE-4 TYPE-4 WALL WALLSECTION SECTION COMPOUND WALL DETAIL A6A6

1:51:5

A-512.3 A-512.3

CUSTOM LATCH DESIGN TO BE DISCUSSED WITH FABRICATOR.

A8 A8

TYPICAL TYPICALRAILING RAILINGDETAIL DETAIL

WALL TYPE TYPEDESCRIPTION LEGEND LEGENDWALL DESCRIPTION

KEY LOCKING MECHANISM FOR THE MAILBOX TO BE DISCUSSED WITH FABRICATOR PRIOR TO EXECUTION.

390

ALIGN

5mm THK MS DUMMY PLATE RECESSED BY 5mm FROM WALL SURFACE.

ALIGN

5 50

INSIDE

WATERPROOF INTERNAL WATERPROOF INTERNAL

15-20mm THICK ON PLASTER 15-20mm THICK ON 5mm THK MS PLATES TO BEPLASTER THK MS PLATES TO BE FLUSH W/ WALL SURFACE.5mm BOTH SIDES OF COMPOUND BOTH SIDES OF COMPOUND FLUSH W/ WALL SURFACE. WALL. 5mm THK MS SHUTTER AS WALL. SPECIFIED BY ARCHITECT 5mm THK MS SHUTTER AS BY ARCHITECT PLINTH BEAM DETAILS ASAS PLINTH BEAM DETAILS RECESSED BY 5mm FROM SPECIFIED RECESSED BY 5mm FROM WALL SURFACE. PROVIDED BY STRUCTURAL PROVIDED BY STRUCTURAL WALL SURFACE. 400 400

25 370

200 200

ALIGN

INSIDE

365

VARIES VARIES 200 200

PARKING PARKING LVL LVL +75 +75 MM MM FFL FFL

390

7575

200 200

180

150

400X230X200mm 400X230X200mm MUD MUD CONCRETE CONCRETE BLOCK BLOCK MASONRY MASONRY WALL WALL COMPLETE COMPLETE W/W/ WITH WITH SEALER SEALER COAT COAT ASAS SPECIFIED. SPECIFIED.

230 230

OUTSI

MAIL SLOT.

MAIL SLOT ON THE ALIGN OUTSIDE.

D6D6 A-512.3 A-512.3

400

CONCRETE CONCRETE INFILL INFILL FOR FOR MS MS ANCHORS. ANCHORS.

230

8mm 8mm DIA DIA MS MS DOWELS. DOWELS.

OUTSIDE

4655 4655 TYPE TYPE 22

ALIGN

OUTSIDE

1985 1985

50 TYPE TYPE 1 1 280

MAIL SLOT. 5mm THK MS DUMMY PLATE RECESSED BY 5mm FROM 5mm THK MS DUMMY PLATE WALL SURFACE. ALIGN RECESSED BY 5mm FROM WALL SURFACE.

170

MAIL SLOT.

DOOR BELL AS SPECIFIED BY ARCHITECT, RECESSED BY 5mm FROM WALL SURFACE. TO ALIGN W/ DUMMY PLATE.

280

400

ALIGN

BY 5mm FROM WALL SURFACE. TO ALIGN W/ DUMMY PLATE.

DUMMY PLATE.

1760/R

400

1725 1725

75x75x5mm 75x75x5mm MS MS PLATE PLATE FLUSHED FLUSHED TO TO CONCRETE CONCRETE INFILL INFILL WITH WITH MS MS OUTSIDE DOWELS/COUNTER DOWELS/COUNTER SUNK SUNK ANCHOR ANCHOR BOLTS. BOLTS. ALL ALL ENAMEL ENAMEL PAINTED PAINTED ASAS SPECIFIED SPECIFIED BYBY ARCHITECT. ARCHITECT.

280

200

400

40x10mm 40x10mm MS MS VERTICAL VERTICAL FLAT, FLAT, ENAMEL ENAMEL PAINTED PAINTED ASAS SPECIFIED SPECIFIED BYBY ARCHITECT. ARCHITECT. 50

75 75

15 15

+1800 +1800 MM MM FFL FFL

15 15

EQ EQ 20 20

EQ EQ

MAILBOX DETAIL ELEVATION

400X 230 XX 200mm MUD 400X 230 200mm MUD CONCRETE BLOCK CONCRETE BLOCK DOOR BELL AS SPECIFIED MASONRY WALL COMPLETE MASONRY WALL COMPLETE BY ARCHITECT, RECESSED DOOR BELLSEALER AS SPECIFIED W/W/ WITH COAT ASAS WITH SEALER COAT BY 5mm FROM WALL BY ARCHITECT, RECESSED SPECIFIED. SPECIFIED. SURFACE. TO ALIGN W/

5mm THK MS PLATES TO BE FLUSH W/ WALL SURFACE.

7mm THK MORTAR. 7mm THK MORTAR.

TO ALIGN TO ALIGN W/ PLANTER WALL W/ PLANTER WALL

75 75

+1800 +1800 MM MM FFL FFL

2975 2975 MAIN GATE OPENING MAIN GATE OPENING

35 35

MOULD. MOULD. 5mm THK MS PLATES TO BE FLUSH W/ WALL SURFACE.

1515

5mm THK MS SHUTTER AS SPECIFIED BY ARCHITECT.

F1F1 A-512.3 A-512.3

ALIGN

5mm THK MS SHUTTER AS SPECIFIED BY 20mm THK. STONE COPING 20mm THK. STONE COPING ARCHITECT.

ALIGN

1155 1155 1200 1200

ALIGN

190

EQ EQ 5

EQ EQ

KEY LOCKING MECHANISM FOR THE MAILBOX TO BE DISCUSSED WITH FABRICATOR PRIOR TO EXECUTION.

ALIGN

10mm 10mm DIA DIA MS MS VERTICAL VERTICAL RODS RODS WELDED WELDED TO TO HORIZONTAL HORIZONTAL FLAT FLAT @@ APPROX APPROX 200mm 200mm SPACING. SPACING. ENAMEL ENAMEL PAINTED PAINTED ASAS SPECIFIED SPECIFIED BYBY ARCHITECT. ARCHITECT.

HOW HOW DO DO I I REPRESENT REPRESENT THIS? THIS? SHOULD SHOULD I ADD I ADD AA NEW NEW WALL WALL TYPE? TYPE? 190

10 10

A8A8 A-512.3 A-512.3

365

25 365

KEY LOCKING RODS, ENAMEL PAINTED RODS, ENAMEL PAINTED ASAS MECHANISM SPECIFIED ARCHITECT. SPECIFIED BYBY ARCHITECT. FOR THE MAILBOX TO BE DISCUSSED WITH 40x10mm MS VERTICAL 40x10mm MS VERTICAL FABRICATOR FLAT, ENAMEL PAINTED FLAT, ENAMEL PAINTED ASAS PRIOR TO SPECIFIED BY ARCHITECT. SPECIFIED BY ARCHITECT. EXECUTION.

40x10mm 40x10mm MS MS HORIZONTAL HORIZONTAL FLAT, FLAT, ENAMEL ENAMEL PAINTED PAINTED ASAS SPECIFIED SPECIFIED BYBY ARCHITECT. ARCHITECT.

200

PLANTER PLANTER SLAB SLAB BOTTOM BOTTOM 3000 3000 MM MM

400 5

230

1010

MAIL SLOT ON THE OUTSIDE.

TO ALIGN TO ALIGN W/ PLANTER WALL W/ PLANTER WALL

400

200

4040

40x10mm 40x10mm MS MS HORIZONTAL HORIZONTAL FLAT, FLAT, ENAMEL ENAMEL PAINTED PAINTED ASAS

MAIL SLOT SPECIFIED SPECIFIED BYBY ARCHITECT. ARCHITECT. ON THE OUTSIDE.

PLANTER PLANTER SLAB SLAB BOTTOM BOTTOM 3000 3000 MM MM

180

10 10

EQ EQEQ EQ

3000 30 BEA B

1800 18 FINI FI MSM

E-E NO T

NOTE-A

900

APS

NOTE-A

E-E NOT

900

SLO

X / 70-75 APPROX. ALIGN

NOTE-E E-E

100

N CHAMBER EP OPENING FOR G-2 300mm BELOW NOTES FINISHED GARDEN LVL.

APS

B / 60-65 REFER WINDOW APPROX. G7

ANY DIM TO OF PRO

X / 70-75 APPROX.

Y / 70-75 APPROX

ALL UNL

X APS

PLAN 00

600

DETAILS. D7 A-605

A-605

100

DRA

50 5mm GROOVE

B/W STONE 100x100x60mm STONE AND EXPOSED COBBLE W/ EQUAL CONC. WALL. SPACING AS SPECIFIED. REFER 20mm THK. COFFEE B6/A-605.1 BROWN LEATHER FINISH STONE S CLADDING ON EDGES AS PER F7/A-605.

B 100

E-E

NOTE-A

X 100

ALIGN

E1 DSK-017

100

SLO

NOTE-E

S ALIGN

NOT

ALIGN

NOT

E6 A-605.1

DRA CON STR

1:60

NOT

Y / 70-75 APPROX S

X / 70-75 APPROX.

X 50

100

NOTE-E

APS

100

ALIGN

100

X / 70-75 APPROX.

Y / 70-75 APPROX

SLO

ALIGN

NOTE A - JOINTS TO ALIGN WITH JUNCTION OF DIRECTION CHANGE. ARCHITECTURE & INTERIORS: SUBSEQUENT SLABS WILL NEED TO CUT TO MAINTAIN ALIGNMENT. NOTE B - SKIRTING TO BE 50MM HIGH AND MATCH FLOORING UNLESS OTHERWISE SPECIFIED. NOTE C - REFER SHEETS A-505 TO A-510 FOR TOILET FLOORING LAYOUTS. NOTE D - METAL TRAY DETAIL AT SUMP TANK MAN HOLE OPENINGS TO BE DISCUSSEDCONSULTANTS: WITH ARCHITECT PRIOR TO EXECUTION. STRUCTURAL NOTE E - ALL KITCHEN / PANTRY OTLA AND SKIRTING TO BE EXECUTED AS PER KITCHEN VENDOR DRAWINGS. GATE ELEVATION NOTE F - FLOOR POINTS TO BE INCORPORATED INTO FLOORING. NOTE G - NO SKIRTING ON ALL EXPOSED CONC. SURFACES. 50

100

VARIES

445

WORK

ALIGN

X X X X

ALIGN

OWNER:

238 / APS

ALIGN

APS

ALIGN

EQ EQ

100

ALIGN

ALIG N

VARIES

ALIGN

110

ALIGN

20 40

SECTION - E4

SECTION - D9

ALIGN

60 50

20 40

ALIGN

IC 1

20 40

SLOPE

50A

NOTE A - JOINTS TO ALIGN WITH JUNCTION OF DIRECTION CHANGE. SUBSEQUENT SLABS WILL NEED TO CUT TO MAINTAIN ALIGNMENT. NOTE B - SKIRTING TO BE 50MM HIGH AND MATCH FLOORING UNLESS OTHERWISE SPECIFIED. NOTE C - REFER SHEETS A-505 TO A-510 FOR TOILET FLOORING LAYOUTS. NOTE D - METAL TRAY DETAIL AT SUMP TANK MAN HOLE OPENINGS TO BE DISCUSSED WITH ARCHITECT PRIOR TO EXECUTION. NOTE E - ALL KITCHEN / PANTRY OTLA AND SKIRTING TO BE EXECUTED AS PER KITCHEN VENDOR DRAWINGS. NOTE F - FLOOR POINTS TO BE INCORPORATED INTO FLOORING. NOTE G - NO SKIRTING ON ALL EXPOSED CONC. SURFACES. S

STRU

-S & S CONS 926, 1 BANG

B / 60-65 APPROX.

B SLOPE E6 G2 A-605.1

GT 1

GT 2

A8 A-605

ALIG S

E-E

ELEVATOR FLOORING AS SPECIFIED BY ARCHITECT.

ALIGN

STONE SKIRTING OF UTILITY HEIGHT. ELREQUIRED +450MM FFL REFER D7/A-605.

IC 2

F1 ALIGN ALIGN R T.D. A-605.1 C1 150mm HIGH A-605.1 EP STONE SKIRTING. EP S STONE UNDER WINDOW EL+125MM FFL FRAME. REFER F7/A-605. NOTE-E ALIGN DECKA / 70-75 FFL APPROX. S EL +520MM

A8 A A-605

GUEST BEDROOM EL +600MM FFL

A / 70-75 APPROX.

ALIG

REFER ARCH. DRAWING DSK-19 IN CONJUNCTION W/ 20mm 6THK SIRA NOTE-E 00 STONE AS SPECIFIED. B1/A-605, FLOORING LAYOUT FOR ALL PLUMBING AND GUEST BATHROOM REFER E3,F4/A-605.1 EL +585MM FFL ELECTRICAL CHAMBER LOCATIONS.

Collec 686, 9 Indiran T:

REFER WINDOW DETAILS.

DINING ROOM EL +600MM FFL T.D.

DECK 4mm THK. M.S. TRAY COATED +520 MM FFL

SLOPE

NOT E-E

ALIGN

E-E

NOT

E-A NOT

E-F

ARCH

UP EQ G3 G2 A-605 S S KITCHEN UTILITY G3 EQ PRINT EP S CHAMBER EL +600MM FFL EL +450MM FFL M.S. TRAY COATED WITH YELLOW OXIDE AND A-605.2 GT-3 EXPOSED MUDBY B1 2-3mm THK SS PLATE AS SPECIFIED BY TRAY W/ ADHESIVE100 AS SPECIFIED ALIGN ALIGN OPENING NOT 230 X 750 mm PLINTH 100 50 PAINTED IN ENAMEL PAINT AS SPECIFIED BY 7 6 YELLOW OXIDE AND 5 4 3 2 1 E3 WITH SUBMIS CONCRETE BLOCK TYP. C3 A-605.1 ARCHITECT. ARCHITECT. STONE SKIRTING OF IC 3E-A BEAM. G1 FOR G-2 ARCHITECT. TRAY MADE W/ 4mm THK. MS MORTAR A-605.1 GT PAINTED IN ENAMEL PAINT ASVARIES IC 2 WALL. A-605.1 F4 VARIES VARIES BW/PW 100x100x60mm STONE REQUIRED HEIGHT. E3 4mm THK. M.S. TRAYMASONRY COATED WITH 300mm 40mm THK SIRA MEMBERS LOCATED OVER CHAMBER THICKNESS BE ALIG ALIGN 1 SPECIFIED BYTO ARCHITECT. NOTE-C 230 A-605.1 150 mm THK MASONRY VARIES COBBLE W/ EQUALREFER D7/A-605. SIM. S N A-605.1 GUEST BEDROOM YELLOW OXIDE AND 230 PAINTED IN ENAMEL BELOW X 400mm PLINTH ALIGN DETERMINED AT MATERIAL STONE PAVERS OPENINGS TRAY W/ FLOORING UP TO SUPPORT FLOORING MATERIAL. BUND WALL. F4 100mm HIGH ALIGN SKIRTING AS SPECIFIED SPACING AS SPECIFIED. EL +600MM FFL RALIGN SIM. PAINT AS SPECIFIED BY ARCHITECT. BEAM FINISHED 100 SITE.TO ALIGN FIXED TO TRAY SIM. S A7 INFILL BE PLACED ON 4 40W/ 150 40 VARIES A-605.1 BY KITCHEN VENDOR DRAWINGS. 600X900XMM COFFEE BROWN LEATHER TRAY W/ PAVING MATERIAL INFILL TO BE GARDEN 20mm THK. COFFEE ADHESIVE AS E1 WATERPROOF INTERNAL A-605 230 X 750mm MANHOLE UPSTAND. AS REQUIRED BYCONC. CONTRACTOR GT S S FINISH STONE FLOORING. 20MM THK PLACED ON MANHOLE CONC. UPSTAND. LVL. STONE UNDER WINDOW SIM. BROWN LEATHER FINISH SPECIFIED BY ALIG DSK-017 PLASTER 15-20mm THICK W1 PLINTH T.D. 2 CBT.D. 50mm HIGH STONE SKIRTING FLUSH W/ THK SIRA STONETYP. 20mm THKBEAM STONE 20mm N UNLESS SPECIFIED. (SLABS AT TRANSITION FRAME. REFER F7/A-605. IC 1 STONE CLADDING ON ON BOTH SIDES OF ARCHITECT. S T.D. PARKING SLOPE 40mm THK ALIGN FLOORING FIXED TO TRAY FINISHED WALL SURFACE TO MATCH E7 E1CLADDING FOR T.D. OF DIRECTION MAY NEED TO BE CUT FROM NOTE-G SECTION AT W1 AND LEVEL W2 MASONRY F7 EDGES AS PER ALIGN COMPOUND WALL. ALIG G3/A-605.1 A-605.2 R DECK T.D.F7/A-605. WALL 310 100 PARKINGSLAB TO MAINTAIN ALIGNMENT.) 4mm GROOVE B/W A-605.2 FLOORING. 50mm REFER W/ ADHESIVE AS THRESHOLD OF STAFF 600X900MM N A-605 EL +520MM FFL +75 MM FFL G3AS SPECIFIED. EL +75MM FFL BEHIND BEAM. 1:8 NOTE-D PAVERS. SPECIFIED BY ARCHITECT. TOILET ALIG SIM. 150mm HIGH G7 ALIGN N NOTE-C 230 A-605.2 F1 LARGER THAN 600x900mm COFFEE BROWN 5mm GROOVE 20mm THK MORTAR. 4mm THICK M S S ALIGN 20mm THK MORTAR. UTILITY LEVEL A-605.1 STONE SKIRTING. A-605 SOLID WOOD TREADS FOR STAIRCASE. NOTE-C LEATHER FINISH STONE FLOORING. 20mm BETWEEN STONE DN SLOPE TYP. PANTRY GF TRAY W/ PAVING 40mm THK PCC BED. +450 MM FFL 40mm THK PCC BED. THK UNLESS SPECIFIED.GUEST BATHROOM AND EXPOSED A3 EL +600MM FFL 25 25 S MATERIAL INFILL. ST EL +585MM FFL ST 5mm GROOVE E POWDER ROOM EQ EQ 100mm THK RCC UPSTAND. EP EP A-605.1 CONCRETE WALL. EXPOSED CONCRETE 5X5mm GROOVE TO ALIGN 100mm THK RCC ALIGN OP OTLA BELOW CABINETRY 50mm B/W HIGH NOTE-E EL +585MM FFL A / 70-75 WALL. ALIGN 100x100x40mm SIRA STONE AS PAVERS SL STONE CHAMBER EL+125MM FFL APS 25 50mm RCC MANHOLE 20mm THK SIRA 5mmTHK GROOVE IN 25 BE PROVIDED. APS APS 25 25 OPENING. UPSTAND. S BASIC BLACK F6 FINISHED USING OR WHITE AND EXPOSED APPROX. FOR PARKING AREA. B / 60-65 20mm THK STONE COVER. STONE CLADDING STONE. D 6 OF APPROVED ALIGN A-605.1 TILES SIZE. 50mm THK RCC MANHOLE D7UTILITY FFL 4mm GROOVE AT CONC. WALL. DETAIL AT D1VARIES D9APS DETAIL AT COMPOUND WALL APPROX. FLOORING AS ON THE OUTSIDE A B 25 25 EARTH 20mmFILL. THK STONE COVER. A8 REFER WALL EDGE. NOTE-E S A-605 1:8 A-605 1:12EL +450MM THE FLOOR LIGHTS/SOCKETS AS PER SPECIFIED BY TOILET TILES AS SPECIFIED BY ON ALL 4 SIDES. ENTRANCE VESTIBULE DECK FLOORING. G3 G2 CHAMBER AS PER VARIES A-605 S S B6/A-605.1 VARIES ARCHITECTURAL DRG EL-101.1, TO BE ARCHITECT. ARCHITECT. REFER DRAWING A-505FFL EL +600MMFS FFL G3DSK-19 IN CONJUNCTION W/ EL +520MM LAYOUT AS EARTH MORTAR THICKNESS 50 PLUMBING DRAWINGS. REFER ARCH. DRAWING 40mm FILL. THK SIRA STONE PAVERS FIXED TO 100 A 20mm THK SIRA OUTSIDE INSIDE C8 CHAMBER D7 FLUSHED WITH STONE FLOORING. A-510.1 A-605.2 GT-3ALIGN F7 B7 100x100x60mm STONE SPECIFIED. TO BE DETERMINED B1 AND TRAY W/ ADHESIVE AS SPECIFIED SPECIFIED BY EQ EQ EQ EQ EQ EQ STONE AS SPECIFIED. OPENING A-605.1 B1/A-605, FLOORING LAYOUT FOR ALL PLUMBING A-605 CHAMBER DETAILS AS E3 A-605 A-605 600SKIRTING OF TILES AS SPECIFIED REFER B1/A-605. AT SITE. TYP. A-605.1 ARCHITECT. STONE REFER E3,F4/A-605.1 FOR G-2 IC 3 IN PLUMBING DRAWING. A-605.1 IC 2 SIM. BY ARCHITECT. ELECTRICAL CHAMBER LOCATIONS. F4 VARIES VARIES VARIES BW/PW 20mmWITH THK STONE REQUIRED HEIGHT. D9 TYP. ELEVATOR FLOORING AS EQ EQ E3 4mm THK. M.S. TRAY COATED 300mm OUTSIDE INSIDE SECTION A8 TYP. PLAN FOR PAVERS A7 LEGEND A4 GROUND FLOOR X X R NOTE-C A-605.1 4 ALIGN SIM. 5mm GROOVE IN REFER D7/A-605. SKIRTING OF REQUIRED A-605 A-605.1 YELLOW OXIDE AND PAINTED IN ENAMEL SPECIFIED BY ARCHITECT. BELOW Deepika Mogilishetty & Sandeep Farias +600 MM FFL A-605 1:16 A-605 1:12 A-605 F4 HEIGHT TO BE SIM. NTS STONE. PAINT AS SPECIFIED BY ARCHITECT. FINISHED 100 ELEVATION G6 TYP. ALIGN SECTION FOR PAVERS AT PARKING SIM. 100 A7 B7 PLAN 00 B1 4 THK SIRA TOFLUSHED A-605.1 TRAY W/ PAVING 20mm MATERIAL INFILL BE PROVIDED, SAND BED AS GARDEN E1 CookeTown, 7 CONC. 6 5 4 3 2 1 A-605 10 9 8 A-605.1 1:30 GT STONE COPING. 1:16 1:60 A-605 ON MANHOLE A-605 PLACED UPSTAND. LVL. WITH BLOCKWORK. SIM. REQUIRED. S DSK-017 2 DECK CB TYP. Bangalore, Karnataka WALL TILE PARKING LEVEL T.D. PARKING EXPOSED MUD SLOPE 4 +520 MM FFL ALIGN ALIGN 50 100 50 LEVEL CLADDING AS +125 MM FFL CONCRETE BLOCK PARKING C3 50mm M.S. TRAY COATED WITH YELLOW OXIDE AND 4mm THK. M.S. TRAY COATED 2-3mm THK SS PLATE AS SPECIFIED BY 100 MASONRY WALL. MORTAR SPECIFIED. +75 MM FFL EL +75MM IN FFL NOTE-D A-605.1 100x100x40mm SIRA PAINTED ENAMEL PAINT AS SPECIFIED BY 100x100x60mm STONE WITH YELLOW AND ARCHITECT. ALIGN ALIGN THICKNESS TOOXIDE BE F1 STONE FOR PAVING. ARCHITECT. TRAY MADE W/ 4mm THK. MS 50mm OFFSET IN COBBLE W/ EQUAL PAINTED IN ENAMEL PAINT AS 20mm THK MORTAR. GUEST BEDROOM 230 X 400mm PLINTH DETERMINED AT A-605.1 ALIGN E1 UP 40mm THK SIRA MEMBERS LOCATED OVER CHAMBER EXPOSED SPACING AS SPECIFIED. GOOD 40mm THK PCC BED AS SPECIFIED BY ARCHITECT. GF EL +600MM FFL BEAM ALIGN SITE. PCC BED. ALIGN 40mm THKVARIES ALIGN A-605.1 STONE PAVERS OPENINGS TO SUPPORT FLOORING MATERIAL. CONCRETE WALL. TRAY W/ FLOORING MATERIAL ST ST CollectiveProject 100mm HIGH SKIRTING AS SPECIFIED EQ EQ EP EP 20mm THK. COFFEE WATERPROOF INTERNAL MORTAR TO BE SET IN 230 X 750mm FIXED TO TRAY W/ 100mm THK RCC EXPOSED INFILL TO BE PLACED ON S S VARIES BY KITCHEN VENDOR DRAWINGS. STONE UNDER WINDOW 600X900XMM COFFEE BROWN LEATHER NOTE-G BROWN LEATHER FINISH EL+125MM FFL APS 25 PLASTER 15-20mm THICK T.D. BY 10mm. PLINTH BEAM T.D. APS APS 25 25 25 ADHESIVE AS UPSTAND. 686, 9th A Main Road,1st Stage MANHOLE CONC. UPSTAND. CONCRETE WALL. FRAME. REFER F7/A-605. FINISH STONE FLOORING. 20MM THK STONE CLADDING ON ON BOTH SIDES OF SPECIFIED BY ALIGN APS 20mm THK SIRA STONE 50mm THK RCC MANHOLE E7 T.D. 50mm HIGH STONE SKIRTING FLUSH W/ E1 20mm THK STONE VARIES Indiranagar, Bangalore 560038 UNLESS SPECIFIED. (SLABS AT TRANSITION EDGES AS PER F7/A-605. DRAW 80mm THK COMPOUND WALL. ARCHITECT. DECK CLADDING. COVER. A-605.2 A-605.2 FLOORING FIXED TO TRAY FINISHED WALL SURFACE TO MATCH OF DIRECTION MAY NEED TO BE CUT FROM MASONRY WALL EL +520MM FFL T: +91-99-00-517996 RR VARIES4mm GROOVE B/W FLOORING. REFER G3/A-605.1 W/ ADHESIVEDECK AS 600X900MM SLAB TO MAINTAIN ALIGNMENT.) SIM. BEHIND EXPOSED 50 100 EARTH 50 REFER ARCH. DRAWING DSK-19 IN CONJUNCTION W/ 230 100 A 20mm THK SIRA NOTE-C 80 FILL. G7 PAVERS. 150 D7 SPECIFIED BY ARCHITECT. CONCRETE WALL. B7 520 MM FFL 3 STONE AS SPECIFIED. LARGER THAN 600x900mm COFFEE BROWN B1/A-605, FLOORING LAYOUT FOR ALL PLUMBING AND A-605 A-605 CHAMBER DETAILS AS SPECIFIED DN SLOPE 20mm THK MORTAR. A-605 NOTE-C 600 4mm THICK M S AE3,F4/A-605.1 / STONE 70-75 APPROX SHEET REFER GUEST BATHROOM SOLID LEATHER FINISH FLOORING. 20mmELECTRICAL IN PLUMBING DRAWING. 2 A3WOOD TREADS FOR STAIRCASE. CHAMBER LOCATIONS. TRAY W/ PAVING 40mm THK PCC BED. TYP. EL +585MM FFL BRICK BUILDOUT E THK UNLESS SPECIFIED. POWDER ROOM A-605.1 P 25 25 NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. A2 1 MATERIAL INFILL. O BY 100mm AS THKREQUIRED RCC UPSTAND. EL +585MM FFL L 50mm HIGHSOTLA BELOW CABINETRY S -S & S ASSOCIATES F6 CONTRACTOR. TYP. SECTIONCHAMBER FOR PAVERS B7 PLAN 00 B1 100x100x40mm SIRA STONE AS PAVERS OPENING. AT PARKING 50mm THK RCC MANHOLE FINISHED USING BASIC BLACK OR WHITE A-605.1 SECTION W4, W5WALL F41:16 D7 DETAIL F1 FOR PARKING AREA. 1:60 A-605 A-605 COVER. DETAIL AT D1 D9 DETAIL ATALONG COMPOUND PROJE CONSULTING ENGINEERS TILES OF APPROVED SIZE. 4mm GROOVE AT A-605.1 A-605 1:8 A-605.1 1:8 A8 25 25 EARTH A-605 1:8 FILL. 1:12 WALL EDGE. G3 926, 17th MAIN, 3rd BLOCK, SRAJAJINAGAR, 4 G2 180032 A-605 S FLOOR LIGHTS/SOCKETS AS PER TOILET TILES AS SPECIFIED BY CHAMBER AS PER VARIES G3 M.S. TRAY COATED WITH YELLOW OXIDE AND 4mm THK. M.S. TRAY COATED 2-3mmARCHITECTURAL THK SS PLATE AS DRG SPECIFIED BY TO BE EL-101.1, 100 40mm THK SIRA STONE PAVERS FIXED TO ARCHITECT. REFER DRAWING A-505 CHAM PLUMBING DRAWINGS. FS PAINTED IN ENAMEL PAINT AS SPECIFIED BY WITH YELLOW OXIDE AND NOTE BANGALORE-10 A - JOINTS TO ALIGNA-605.2 WITH JUNCTION OF DIRECTION CHANGE. ARCHITECT. B1 FLUSHED WITHGT-3 STONE FLOORING. A-510.1 TRAY W/ ADHESIVE AS SPECIFIED BY OPENI ARCHITECT. TRAY MADE W/ 4mm THK. MS SECTION F6 PAINTED IN ENAMEL PAINT AS E3 TYP. A-605.1 ARCHITECT. STONE SKIRTING OF SUBSEQUENT SLABS WILL NEED TO CUT TO MAINTAIN ALIGNMENT. FOR G IC 3 40mm THK SIRA MEMBERS LOCATED OVER CHAMBER SPECIFIED BY ARCHITECT. VARIES A-605.1 1:30 TITLE A-605.1 IC 2 VARIES F4 VARIES VARIES BW/PW REQUIRED HEIGHT. ALIGN E3 4mm THK. M.S. TRAY COATED WITH N 300mm STONE PAVERS OPENINGS TO SUPPORT FLOORING MATERIAL. TRAY W/ FLOORING MATERIAL NOTE-C 100mm HIGH SKIRTING AS SPECIFIED NOTE B SKIRTING TO BE 50MM HIGH AND MATCH FLOORING UNLESS A-605.1 SECTION A8 TYP. PLAN FOR PAVERS A7 LEGEND A4 SIM. REFER D7/A-605. A-605.1 YELLOW OXIDE AND PAINTED IN ENAMEL BELOW FIXED TO TRAY W/ INFILL TO BE PLACED ON VARIES BY KITCHEN VENDOR DRAWINGS. 600X900XMM COFFEE BROWN LEATHER F4 INSIDE BY ALIGN A-605 1:16CONC. UPSTAND. A-605 1:12 A-605 NTS SIM. PAINT AS SPECIFIED ARCHITECT. ADHESIVE AS FINISH 100 OTHERWISE SPECIFIED. MANHOLE ALIGN SIM. A7 WALL TILES FINISH STONE FLOORING. 20MM THK 4 A-605.1 SPECIFIED BY TRAY W/ PAVING MATERIAL INFILL TO BE GARDE A-605 50mm HIGH STONE SKIRTING FLUSH W/ 20mm THK STONE CLADDING ASUNLESS 7 CONC. UPSTAND. 6 SPECIFIED. (SLABS AT TRANSITION 5 4 3 2 TOILET FLOORING 1 E1 GT 10 9 8 ARCHITECT. NOTE C - REFER SHEETS A-505 TO A-510 FOR PLACED ON MANHOLE LVL. SIM.WALL SURFACE TO LIGHT DSK-017 FLOORING FIXED TO TRAY FINISHED MATCH( AS PER SPECIFIED. OF DIRECTION MAY NEED TO BE CUT FROM 2 CB TYP. EQ EQREFER G3/A-605.1 ARCHITECTURAL DRG 4mm GROOVE B/W FLOORING. W/ ADHESIVE AS LAYOUTS. T.D. PARKING 600X900MM SLAB TO MAINTAIN ALIGNMENT.) SLOPE A-605

ALIG N

DNS

SLO

ALIG SLOPE

ALIGN

NOT E-A S

S R

PANTRY EL +600MM FFL

NOTE-E EQ

NOT E-A

ALIGN

900

T.D. FS

N OT E-E

900

R 900

R ALIG

ALIGN

EQ EQ EQ EQ

ALIGN

APS 50

ALIG

ALIGN

EQ EQ

ALIGN

APS

ALIGN

EQ EQ

ALIGN

APS

STEP TO ALIGN W/ COLUMN EDGE

20 20

ALIG

ALIGN

STEP TO ALIGN W/ ALIGN COLUMN EDGE

20 20

150

ALIGN

5020

ALIGN

STEP TO ALIGN W/ COLUMN EDGE

20 80

60 70 150

20 60 50

POWDER TYP.EQ EQ ROOM EQ EL +585MM FFL D9 A-605 RALIGN

ALIG

ALIG ALIGN N

N OT A-605.2 NOTE-C

1E6 A-605.1

T.D.

S B7 ENTRANCENOTE-C VESTIBULE EL +600MM FFL A-605

ALIGN

X A-605.1 R

LIVING ROOM ALIGN EL +600MM FFL G3 A-605.2 ST ST TYP.

EQ NOTE-C

E7 A-605.2

Deepik Cooke Banga

150

S X

ALIG

TYP.

NOTE-D

EL +520MM FFL DECK EL +520MM FFL 150mm HIGH SLOPE STONE SKIRTING.

B1 A-605.1

TYP. KITCHEN EL +600MM FFL ELEVATOR FLOORING AS SPECIFIED BY ARCHITECT.

OWNE

UTILITY 100 50 EL +450MM FFL 100x100x60mm STONE C6 G1 COBBLE W/ EQUAL GT A-605.1 SPACING AS1SPECIFIED. SIM. 5mm GROOVE 20mm THK. COFFEE B/W STONE BROWN LEATHER FINISH AND EXPOSED CONC. WALL. STONE CLADDING ON REFER ASICPER EDGES 1 F7/A-605. EP B6/A-605.1 R T.D. ALIGN G7 A-605

SIM.

ALIG

REFER WINDOW DETAILS.

ALIGN

ALIG N DECK

B / 60-65 APPROX.

F7 A-605

NOTE-F NOTE-E

G3 A-605.2

ALIGN

DECK EL +520MM FFL

50 20

NOTE-E

A7 A-605 R

SLOPE 50mm

ALIG

C3 A-605.1 SLO P

SIM.

PANTRY EL +600MM FFL

C1 A-605.1

ALIGN

20mm THK. COFFEE BROWN LEATHER FINISH STONE UNDER WINDOW FRAME. REFER G7/A-605.

F4 A-605.1

SIM.

ALIGN

SLOPE

STONE UNDER WINDOW

ALIGN FRAME. REFER F7/A-605.

ALIG

E3 A-605.1

A-605.1

ALIG

A / 70-75 APPROX.

5mm GROOVE B/W STONE AND EXPOSED CONC. WALL. REFER S B6/A-605.1

ALIGN

NOT ALIGN E-A F4

SIM.

GT-3 EQ

SIM.

EQ PE

NOTE-C G3 A-605.2 NOTGUEST BATHROOM E-F TYP. EL +585MM FFL

T.D.

O SL

ALIG

D9 A-605

A3 A-605.1

NOTE-A

600

EQ IC 3

IC 1 R

T.D.

B7 D7

EQ E3 EQ A-605.1

DECK EL +520MM FFL

KITCHEN EL +600MM FFL 20mm THK. COFFEE DINING ROOM BROWN LEATHER FINISH EL +600MM FFL ALIGN GUEST STONEBEDROOM UNDER WINDOW EL +600MM FFL G7/A-605. FRAME. REFER S

X R 20mm THK. COFFEE BROWN LEATHER FINISH STONE CLADDING ON EDGES SAS PER G7/A-605. S

5mm GROOVE ALIGN B/W STONE AND EXPOSED CONC. WALL. REFER B6/A-605.1 DN

G6 A-605.1

TYP. SECTION FOR PAVERS AT PARKING DETAIL AT COMPOUND WALL

GROUND FLOOR +600 MM FFL 1:8

EQ EQ X

E1 A-605.2 FS

ALIG

CHAMBER OPENING FOR EP 450mm BELOW POWDER ROOM FINISHED GARDEN LVL. EL +585MM FFL ALIGN F6 A-605.1 F7 A-605 S ENTRANCE VESTIBULE S DECK SIM. EL +600MM FFL EL +520MM FFL R

EQ EP

PARKING EL +75MM FFL

T.D.

AT SITE. MORTAR THICKNESS 20mm THK STONE TO BE DETERMINED SKIRTING OF REQUIRED AT SITE. 1:16 A-605 HEIGHT TO BE A-605 1:12 SOLING. PROVIDED, FLUSHED 4 WITH BLOCKWORK. GRAVEL FILLING. 40mm THK SIRA STONE PAVERS FIXED TO

T.D. ALIGN

ALIG

NOTE-E

ELEVATOR FLOORING AS SPECIFIED BY ARCHITECT.

E7 A-605.2

150mm HIGH STONE SKIRTING.

NOTE-F

UP ALIG N

5mm GROOVE B/W STONE AND EXPOSED CONC. WALL. ALIGN REFER B6/A-605.1 R

LIVING ROOM EL +600MM FFL

SIM.

BW/PWEP

20mm THK. COFFEE BROWN LEATHER FINISH STONE CLADDING ON ALIGN EDGES AS PER G7/A-605.

T.D.

NOTE-C

A3 E A-605.1 OP 5mm GROOVE SL B/W STONE S AND EXPOSED CONC. WALL. REFER B6/A-605.1

NOTE-E

SLO

SIM.

C1 A-605.1

UTILITY EL +450MM FFL EP G1 GT 1

C6 A-605.1

SIM.

E OP

A-605.1

DINING ROOM EL +600MM F7 ALFFL IGN A-605

ALIG

600

NOC6 TE-A

ALIG

100

NOTES

PROFESSIONAL TRAINING - COLLECTIVE PROJECT / BLOCK HOUSE

ALIGN

20mm THK. COFFEE BROWN LEATHER FINISH STONE UNDER WINDOW FRAME. REFER G7/A-605.

EL +450MM

20MM STONE CHAMBER DETAILS ASTHK SPECIFIED MORTAR THICKNESS FLOORING LAYOUT IN PLUMBING DRAWING. TO BE DETERMINED AS SPECIFIED.

ALIGN

C3 A-605.1

INSIDE

SECTION - B7

FLOORING. LAYOUT AS SPECIFIED. REFER B1/A-605.

DETAIL AT D1

EALIGN Q

OUTSIDE

E-F

EP 20mm THK. COFFEE 900LEATHER FINISH BROWN STONE CLADDING ON EDGES AS PER G7/A-605. UP

ALIGN

SLOPE

D9 SIM. A-605

NOT

F7 A-605

N ALIGN PANTRY EL +600MM FFL DN

ALIG

ENTRANCE VESTIBULE S EL +600MM FFL

EL +520MM FFL

SECTION - F7 E

CHAMBER OPENING FOR EP 450mm BELOW DECK GARDEN LVL. FINISHED

20mm THK. COFFEE BROWN LEATHER FINISH STONE UNDER WINDOW ALIG FRAME. REFER G7/A-605.

NOTE-A

ALIGN

5mm GROOVE B/W STONE AND EXPOSED CONC. WALL. REFER B6/A-605.1

G3 LIVING ROOMA-605.2 EL +600MM FFL TYP.

ALIG G6 A-605.1

KITCHEN EL +600MM FFL

OUTSIDE

SLOPE

LIGN

SLO

E OP SL

IN STONE DECK GROUND FLOOR +520MM FFL TO 5X5mm GROOVE ALIGN ALIGN +600MM FFL 5mm GROOVE IN MORTAR THICKNESS BE PROVIDED. SLOPE TO BE DETERMINED AT STONE. UTILITY FFL SITE. 20mm THK STONE DECK ELTHK +450MM 20mm STONE FLOORING. +520MM FFL FLOORING LAYOUT AS LAYOUT AS MORTAR THICKNESS OUTSIDE INSIDE SPECIFIED. SPECIFIED. BE DETERMINED 20MM THKTO STONE REFER B1/A-605. REFER B1/A-605. SITE. FLOORINGAT LAYOUT SANDTHK BEDSTONE AS AS REQUIRED BY CONTRACTOR 20mm AS SPECIFIED. REQUIRED. GROUND FLOOR SKIRTING 7OF REQUIRED 10 9 8 MORTAR THICKNESS +600 MM FFL HEIGHT TO BE TO BE DETERMINED PROVIDED, FLUSHED AS SPECIFIED BY VENDOR SECTION AT W6AT SITE. WITH BLOCKWORK. G7 DECK A-605SOLING. 1:8 EXPOSED MUD 5X5mm GROOVE +520 MM FFL GRAVEL FILLING. CONCRETE BLOCK IN STONE. 230 200 MORTAR 230 X 750 MASONRY mm PLINTH ALIGN 60mmWALL. THK STONE AS SPECIFIED BY VENDOR THICKNESS TO BE BEAM. AS SPECIFIED 230 X BLOCKS 400mm PLINTH DETERMINED AT A / 70-75 A / 70-75 INSIDE OUTSIDE BY ARCHITECT. BEAM 150 mm THK MASONRY SITE. APPROX. APPROX. BUND WALL. GROUND FLOOR WATERPROOF INTERNAL 230 X 750mm +600MM FFLTHICK PLASTER 15-20mm 5X5mm GROOVE PLINTH BEAM 50 100 100 AS REQUIRED BY CONTRACTOR ALIGN IN STONE ON BOTH SIDES OF INSIDE OUTSIDE SLOPE COMPOUND WALL. FLOOR DECK SECTION AT W1 AND W2 GROUND F7 +600MM FFL +520MM FFL ALIGN 1:8 A-605 230 SLOPE MORTAR THICKNESS DECKTO BE DETERMINED AT SITE. +520MM FFL 20mm THK STONE 5X5mm TO ALIGN FLOORING LAYOUT AS 20MM THK STONE GROOVE 5mm GROOVE IN BE PROVIDED. SPECIFIED. FLOORING LAYOUT DETAIL AT D1 D9 DETAIL AT COMPOUND WALL AS SPECIFIED. REFER D7 STONE. B1/A-605. UTILITY FFL 20mm THK STONE A-605 1:8 A-605 1:12 BED AS SAND AS REQUIRED BY CONTRACTOR MORTAR THICKNESS EL +450MM FLOORING. REQUIRED. TO BESTONE DETERMINED 40mm THK SIRA PAVERS FIXED TO LAYOUT AS MORTAR THICKNESS OUTSIDE INSIDE AT SITE. TRAY W/ ADHESIVE ASTO SPECIFIED BY SPECIFIED. BE DETERMINED ARCHITECT.SOLING. REFER B1/A-605. AT SITE. SECTION AT W6 G7 VARIES VARIES VARIES GRAVEL 4mm THK. M.S. TRAYFILLING. COATED WITH 20mm THK STONE A-605 AND PAINTED IN ENAMEL 1:8 GROUND FLOOR YELLOW OXIDE 230 X 750 mm PLINTH OF REQUIRED SKIRTING +600 MM ALIGN FFL PAINT AS SPECIFIED BY ARCHITECT. BEAM. 100 HEIGHT TO BE 230 4 TRAY W/ PAVING MATERIAL INFILL TO BE 200 150 mm THKPROVIDED, MASONRY FLUSHED PLACED ON MANHOLEWITH CONC. UPSTAND. AS SPECIFIED BY VENDOR BLOCKWORK. BUND WALL. DECK PARKING EXPOSED MUD MM FFL AS+520 REQUIRED BY CONTRACTOR LEVEL CONCRETE BLOCK MORTAR +75 MM FFL MASONRY WALL. THICKNESS TO BE SECTION AT W1 AND W2MORTAR. F7 5X5mm GROOVE 20mm THK ALIGN 230 X 400mm PLINTH DETERMINED AT IN STONE INSIDE OUTSIDE A-605 BEAM 1:8 SITE. 40mm THK PCC BED. GROUND FLOOR WATERPROOF INTERNAL 230 X 750mm 100mm THK RCC +600MM FFL15-20mm THICK PLASTER 25PLINTH BEAM APS APS 25 25 25 APS UPSTAND. ON BOTH SIDES OF SLOPE APS 5X5mm GROOVE TO ALIGN 50mm THK RCC MANHOLE COMPOUND WALL. VARIES 5mm GROOVE IN BE PROVIDED. DECK COVER. STONE. +520MMUTILITY FFL FFL VARIES 230 EARTH FILL. 20mm THK STONE INSIDE

SIM.

20mm THK. COFFEE BROWN LEATHER FINISH STONE UNDER WINDOW FRAME. REFER G7/A-605.

5mm GROOVE B/W STONE AND EXPOSED CONC. WALL. REFER B6/A-605.1

100

20mm THK. COFFEE BROWN LEATHER FINISH STONE CLADDING ON EDGES AS PER A G7/A-605.

C6 A-605.1

ALIGN

20mm THK. COFFEE S BROWN LEATHER FINISH STONE CLADDING ON EDGES AS PER G7/A-605.

900

E-A

ALIG

A / 70-75 SECTION AT W1 AND W2 APPROX.

OUTSIDE

E6 A-605.1

INSIDE

200

AS REQUIRED BY CONTRACTOR

NOT

AS SPECIFIEDALIGN BY VENDOR

150 mm THK MASONRY1:8 A-605 BUND WALL. 5X5mm GROOVE IN STONE. 60mm THK STONE BLOCKS AS SPECIFIED A / 70-75 BY ARCHITECT. APPROX. GROUND FLOOR 1:8 A-605 +600MM FFL 100 5X5mm GROOVE

230

230 X 750 mm PLINTH W6BEAM. G7

SECTION AT

AS SPECIFIED BY VENDOR

SIM.

F7 A-605

SAND BED AS SOLING. REQUIRED. GRAVEL FILLING.

AS REQUIRED BY CONTRACTOR

150

FLOORING LAYOUT AS MORTAR THICKNESS SPECIFIED. TO BE DETERMINED REFER B1/A-605. AT SITE.

Pg 22 FLO PLA

110

1 40

ALIGN

150

100

ALIGN EXPOSED CONCRETE A / 70-75 APPROX SURFACE.

W/ STEP T Indiranaga 20mm THK T: FLOORING +91

THE ARCH MORTAR T

DETERMIN STRUCTU

DETAIL ALIGN

INSIDE

-S &BRICK S ASS BU CONSULT NOTE : FR CONDUIT 926, 17th FOR LIGH OUTSIDE BANGALO SPECIFIED

A-605.1

238 / APS

D6 C8 A-605.1

1:8

SIM.

DETAIL PLAN OF WINDOWS W4, W5 ELEVATION

1:25

OUTSIDE 3 INSIDE ALIGN WALL F7 D9 B6TILES NOTE200 : G6 FROM B1/A-605. CLADDING A-605 A-605.1 AS A-605 1:30 3 3 SPECIFIED.3 4 L28G (PLAN AS PER OF WINDOWS W4, W5 DETAIL X 40 X X ARCHITECTURAL DRG 5040mm THK A-605.1 ALIGN EL-101.1) TO BE FLUSHED MASONRY WALL BEHIND COLUMN. WITH STONE PROVISION

EXPOSED 20mm THK SIRA STONE CONCRETE AND CLADDING. 310 STONE

5mm GRO

100

A-605.1

100

OUTSIDE

ALIGN

SECTION

SIM.

100

110

ALIGN

4 40

150

100

1:8

SIM.STONE

C8 A-605.1

1:30

A-605.1

A-605.1 CONCRETE AND A-605.1

NOTE : FROM B1/A-605.

F7 F6 A-605

SECTION

5mm GROOVE

75 MM FFL

SECTION ALONG W4, W5 EXPOSED C8 BETWEEN

MASONRY WALL 40mm THK 5mm GROOVE BEHIND COLUMN. ALIGN MASONRY WALL BETWEEN EXPOSED 150mm THK RCC BEHIND BEAM. CONCRETE AND 5mm COLUMN. GROOVE STONE ALIGN BETWEEN STONE 5mm GROOVE AND BETWEEN EXPOSED NOTE : FROM B1/A-605. CONCRETE WALL. EXPOSED 20mm THK SIRA AND CONCRETE STONE CLADDING STONE F7 ON THE OUTSIDE A-605 NOTE :ON FROM ALL 4 B1/A-605. SIDES. ALIGN OUTSIDE EXPOSED CONCRETE SURFACE.

E3 G6

CONSULT

1:8 1:30

A-605.1 A-605.1

C8 A-605.1 SIM.

NOTE :PARKING FROM LEVEL B1/A-605.

NOTE : FROM B1/A-605.

: FROM B1/A-605.

BRICK BUILDOUT AS REQUIRED BY CONTRACTOR.

20mm THK STONE FLOORING AS SPECIFIED BY ARCHITECT.

STONE SKIRTING. REFER F7/A-605.

445

CONCRETE WALL. CONCRETE WALL 80mm THK SETNOTE-G IN BY 50mm MASONRY WALL BEHIND EXPOSED 80 THK SIRA 20mm CONCRETE WALL. STONE CLADDING ON ALL 4 SIDES AS SPECIFIED.

GROUND FLOOR FFL 600 MM FFL 50 PLANTER LVL 150 450 MM FFL

H ALIGN DECK 520 MM FFL

CORNER FOL

40 40

20mm THK STONE FLOORING NOTE AS SPECIFIED BY ARCHITECT.

NOTE-G

60mm THK STONE BLOCKS AS SPECIFIED BY ARCHITECT.

APS

UTILITY FFL 450 MM FFL

8 STONE SKIRTING 150mm D HIGH TO MATCH FLOORING MATERIAL.

ALIGN

APS

JOINTS. CABINET AS SPECIFIED BY VERTICAL TILING W1 ARCHITECT. JOINTS X TO ALIGN WITH / 70-75 GROUND FLOOR FFL EXPOSED CONCRETE SURFACE. FLOORING APPROXJOINTS. 600 MM FFL 100 5mm GROOVE IN STONE. GROUND FLOOR FFL STONE SKIRTING. REFER X F7/A-605. GROUND FLOOR FFL 600 MM FFL PLANTER LVL 600 MM FFL 5mm GROOVE IN STONE. 450 MM FFL UTILITY FFL STONE SKIRTING. PARKING LEVEL 450 MM FFL REFER F7/A-605. 75 MM FFL 150mm HIGH STONE SKIRTING PARKING LEVEL TO MATCH FLOORING MATERIAL. NOTE : FROM B1/A-605. 75 MM FFL 60mm THK STONE BLOCKS AS SPECIFIED BY ARCHITECT.

445

APS

ALIGN

150

100 ALIGN

ALIGN W/ METAL GATE

ALIGN ALIGN W/ EXPOSED CONC. WALL

190/APS

360

STRUCTURA

X X

ALIGN 600

ALIGN W/ EXPOSED CONC. WALL

500

20 ALIGN W/ METAL GATE

X X

200

360

ALIGN ALIGN W/ EXPOSED 3 CONC. WALL X X

3 445

190/APS

150

100

ARCHITECTURE & INTERIORS:

SECTION - A3

APS

ALIGN W/ METAL GATE

360

ALIGN

A-

600

500

W/ EXPOSED C. WALL

CHECK BY

360

LIGN

DRAWN BY

SECTION - C1WORKING

ALIGN W/ METAL GATE

GOOD FOR CONSTRUCTION

ALIGN W/ EXPOSED 15 CONC. WALL

190/APS

DATE

600

500

PRINTING

445

WORKING DRAWING

/ EXPOSED C. WALL 15

ALIGN

SECTION - B6

50 40 35

360

ALIGN

PROFESSIONAL TRAINING - COLLECTIVE PROJECT / BLOCK HOUSE

ALIGN W/ METAL GATE

ALIGN W/ EXPOSED CONC. WALL

190/APS

SECTION - A8

50 15

APS

ALIGN W/ EXPOSED CONC. WALL

190/APS

ALIGN

100

ALIGN

150

ALIGN

NOTES

100

PRINTING DETA

DATE

40 ALIGN

200

100

150

445

FLOO

PRINTING

50 40

X 50

NOTES

X X X X

150

100

15 20

APS

100

445

ARCHITECTU

WORKIN

STRUCTURAL CONSULTANTS:

SECTION - F1

ALIGN

25 ALIGN

100

ALIGN

150

15 15

5080 15 10050 20 35 40 15 15 50

70 50

NOTES

3 100

200

150

3 ALIGN

ALIGN

100

445

APS

ALIGN CORNER FOLD

80 60

CORNER FOLD

40 150

ALIGN

X X X X

OWNER:

40 70

80 100

80 70

APS

100

APS

238 / APS

ALIGN

445

ALIGN

X X X

APS

STRUCTURAL CONSULTANTS:

SECTION - F6OWNER:

ALIGN

5 20

ALIGN

CORNER FOLD

X X

200

ALIGN

110

150

SECTION - C3

X / APS 238

ARCHITECTURE & INTERIORS:

NOTE-G

40 40

X X X X

40 40

ALIGN

40 20

NOTE-G

ALIGN

40 40

150

238 / APS

200

ALIGN

OWNER:

100 ALIGN

X 100 X

100

ALIGN

200

150

110

ALIGN

CORNER FOLD

APS

ALIGN

40 40

110

SECTION - E6

200

445

B1/A-605.

REFER UTILITY AREA DRAWING FOR GRILL DETAILS. CABINET AS SPECIFIED BY ARCHITECT.

ELEVATION 100 NOTE : FROM F6/A-605.1 AND B7,D7/A-608. 200mm X 200mm PLUS COLUMN WALL PLASTER. 20mm THK SIRA LARGE SLAB SPANNING A-605.1 AS PER STRUCTURAL STONE COPING. THE WIDTH OF OPENING. LIGHT 50mm HIGH STONE 6 5 2 1 ( AS PER G EQ EQ UPSTYPICAL CABINET 5 4 3 2 DRAWING S-4717/SK-01. 1 ARCHITECTURAL DRG TO DETAIL NOTES EXPOSED CONCRETE SECTION E6 GF AND SF STEPLIGHT SKIRTING WALL TILEE3 E1 X L28G ( AS PER ARCHITECTURAL EXPOSED EL101-103) TO BE FLUSHED MATCH FLOORING A-605.1 CLADDING 1:8 AS 300 A-605.1 1:25 230 SURFACE. A-605.1 F7 D9 B6 CONCRETE WALL DRG EL-101.1) TO BE FLUSHED W/ STEP TREAD. 230 CONCRETE LARGE SLAB SPANNING MATERIAL. SPECIFIED. VERTICAL TILING JOINTS A-605 A-605.1 A-605 ALIGN NOTE-G SET BY 50mm WITH STONE PROVISION FOR 3 X / 70-75 3 COLUMN THE WIDTH OF OPENING. 3 3 20mm THK STONE NOTE-G TO IN ALIGN WITH FLOORING EXPOSED CONCRETE SURFACE. 40 150 40 5mm GROOVE. DRAWI 50mm OFFSET IN ABBY MOONWALKER 1-3W. 50 FOR ABBY MOONWALKER 150mm THK RCC 40 150APPROXG40 100 50EXPOSED CONCRETE D8 D7 FLOORING AS SPECIFIED BY JOINTS. E1 200 W1 EXPOSED 20mm THK SIRA D1 5mm GROOVE IN STONE. 4mm THICK M S 200mm X 200mm PLUS COLUMN D CONTRACTOR 200 TO PROVIDE TAL COLUMN 1-3W. CONTRACTOR TO COLUMN. WALL PLASTER. THE ARCHITECT. SURFACE. W1 ALIGN A-605.1 GROUND FLOOR STONE CLADDING ALIGN W2 CONCRETE WALL. LOCATION AS 20mm THK TRAY. SIRA STONE AS PER STRUCTURAL SAMPLE BEFORE EXECUTION. X PROVIDE SAMPLE 20mm THK SIRA STONE GROUND FLOOR FFL 3 3 ALL ME MORTAR THICKNESS TO BE TICAL TILING 50mm HIGH STONE 5mm GROOVE ALIGN W/ W1 AND VERTICAL TILING JOINTS 40mm THK GROUND FLOOR FFL 4 ON ALL 600 4 SIDES +600EXPOSED MM FFL IN UPS CLADDING MENTIONED FOR DECK DRAWING S-4717/SK-01. MM FFL BEFORE EXECUTION. UPS 40mm THK CABINET NOTE-G L28G CLADDING ( AS PER FOR 2-3mm THK SS PLATE FIXED ALL ALIGN ALIGN DETERMINED AT SITE. NOTE-G BETWEEN ALIGN WITH TE-G W2 SKIRTING. TO ALIGN WITH FLOORING MASONRY WALL 310 SKIRTING TO 100 600 MM FFL AS SPECIFIED. UNLES CABINET THRESHOLD OF STAFF X BASE X 40 X X 520DETAILS. MM FFL MASONRY WALL 310 100 AROUND CONCRETE WALL. 3 L28G ( AS PER ARCHITECTURAL STONE SKIRTING. REFER ARCHITECTURAL DRG OF COLUMN, THRESHOLD OF STAFF 200mm X 200mm PLUS EXPOSED 5mm GROOVE IN STONE. MATCH FLOORING RING JOINTS. 300 JOINTS. BEHIND BEAM. UTILITY FFL TOILET AS 20mm SPECIFIED. BEHIND BEAM. W 1TO BE FLUSHED THK STONE DRG EL-101.1) TO BE PAINTED TO MATCH METAL COLUMN EL-101.1) X X X X D1 TOILET AS FLUSHED SPECIFIED. CONCRETE AND 5mm GROOVE F7/A-605.ALIGN 5mm GROOVE COLUMN AS PER 80mmMATERIAL. THK 2 BRICK BUILDOUT. D FLOOR FFL 450 MM FFL ALIGNDRAWING STONE DRAWI WITH STONE PROVISION FOR FLOORING FIXED WITH STONE PROVISION 5mm GROOVE AS SPECIFIED BY ARCHITECT. BRICK BUILDOUT BETWEEN EXPOSED GROUND FLOOR FFL STRUCTURAL ALIGN IN STONE. WALL UTILITY LEVEL 5mm GROOVE BETWEEN STONE NOTE : FRO +520MASONRY MM RL 5mm GROOVE. ALIGN FFL UTILITY LEVEL A8 1 TO TRAY ABBY MOONWALKER 1-3W. FOR ABBY MOONWALKER 4 BETWEEN STONE ASW/ REQUIRED BY CONCRETE AND 150mm HIGH STONE SKIRTING S-4717/SK-01. DECK BEHIND EXPOSED CONJU 600 MM FFL +450 MM TO FFLBE PROVIDED 50 AND EXPOSED ER LVL A-605.1 CONDUIT 1 150 80 MM FFL TO 4mm THICK M S D ADHESIVE. CONTRACTOR TO PROVIDE 1-3W.+450 CONTRACTOR AND EXPOSED CONTRACTOR. STONE LEVEL TO MATCH FLOORING MATERIAL. ALIGN CONCRETE WALL. 520 MM FFL PARKING 3 STONE SKIRTING. REFER EXPOSED CONCRETE CONCRETE WALL. OUTSIDE 2-3mm SS PLATE FIXED ALL FFL EXPOSED CONCRETE GROUND FLOOR FOR LIGHT IN STEPS AS STRUC DECK LEVEL TRAY. LOCATION AS SAMPLE BEFORE EXECUTION. PROVIDE SAMPLE SECTI EXPOSED CONCRETE CONCRETE WALL. MORTAR THICKNESS E 60mm THK STONE BLOCKS AS 75 MM FFL AROUND BASE OF COLUMN, F7/A-605. ALIGN W/ W1 AND WALL. SURFACE. SPECIFIED BY ELECTRICAL 20mm THK SIRA +600 MM FFL MENTIONED IN UPS 520 MM 2 E SKIRTING. BEFORE EXECUTION. WALL. TO BE DETERMINED 2-3mm THK SS PLATE FIXED ALL 20mm THK SIRA SPECIFIED BY ARCHITECT. PAINTED TO MATCH METAL W2 SKIRTING. CONSULTANT. 20mm THK AT STONE BUILDOUT STONEBRICK CLADDING CABINET DETAILS. D6 ER F7/A-605. ALIGN SITE. ANY DI 5mm GROOVE IN STONE. AROUND BASE OF COLUMN, 20mm THK STONE NOTE 1: FROM B1/A-605. STONE CLADDING NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. D6 200mm X 200mm PLUS 200THE ALIGN 20MM THK STONE FLOORING AS 20mm THK STONE FLOORING AS FLOORING AS AS REQUIRED BY COLUMN AS SPECIFIED BY ON OUTSIDE 20mm THK STONE PAINTED TO MATCH METAL COLUMN X X X OUTSIDE X FLOORING CHAMBER FOR ON THE COLUMN AS PERAS ARCHITECT. G LEVEL DIMEN SPECIFIED BY THE ARCHITECT. SPECIFIED BY ARCHITECT. SPECIFIEDCABLES BY THE AS ON ALLCONTRACTOR. 4 SIDES. FLOORING FIXED PARKING LEVEL AS SPECIFIED BY ARCHITECT. SPECIFIED BY THE ON ALL 4 SIDES. STRUCTURAL DRAWING SECTION ARCHITECT. F6 FFL 3 3 SECTION ALONG W4, W5 F4TRAY W/ +520 MM RL A8 MORTAR THICKNESS TO BE TO BE TO SPECIFIED BY ARCHITECT.NOTE : FROM B1/A-605. 75 MM FFL S-4717/SK-01. NOTE : FROM B1/A-605. NOTE : FROM F6/A-605.1 AND B7,D7/A-608. ALIGN C8 C8 F 1:30 A-605.1 A-605.1 F7 100x100x60mm STONE DETERMINED AT SITE. A-605.1 1:8 ADHESIVE. ALIGN ARCHITECT IN UPS 100x100x60mm STONE OF THE A-605.1 A-605.1 2-3mm SS PLATE FIXED ALL C8 A-605 TILES AS SPECIFIED DECK LEVEL NOTE : FROM B1/A-605. CABINET DETAILS. MORTAR THICKNESS TILES AS SPECIFIED AROUND BASE OF COLUMN, G A-605.1OF WINDOWS W4, W5 SECTION E6 DETAIL PLAN E3 TYPICAL GF AND SF STEPLIGHT DETAIL E1 SIM. SIM. BY ARCHITECT. OM B1/A-605. PROCE NOTE : FR NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. 520 MM BASIC TILES FOR OTLA TO BE TO BE DETERMINED BY ARCHITECT. PAINTED TO MATCH METAL OUTSIDE INSIDE 1:25 1:8 A-605.1 A-605.1 A-605.1 4 PROVIDED BY CONTRACTOR. OUTSIDE INSIDE 5mm GROOVE1:8 IN AT SITE. 4 FLOORING AS SECTION F6 200 5mmAS GROOVE IN BY COLUMN SPECIFIED 20MM THK STONE Deepika Mogi STONE. Deepika Mogilishetty & Sandeep Farias CHAMBER FOR REFER UTILITY AREA DRAWING ELEVATION G6 C8 COLUMN DETAIL - ELEVATION 3 COLUMN DETAIL - PLAN C6 100 DETAIL SECTION ALONG UPS TRAP DOOR C3 3 STONE. ARCHITECT. F 3 SPECIFIED BY THE ARCHITECT. 3 1:30 A-605.1 6 20mm THK SIRA 100 SAND BED AS FOR GRILL DETAILS. 20mm THK SIRA CABLES AS PRINTING CookeTown, C SAND BED AS A-605.1 1:30 1:8 EXPOSED A-605.13 A-605.1 1:8 A-605.1 1:8 3 CookeTown, STONE COPING. EXP 30 200 MORTAR THICKNESS TO BE 200 REQUIRED. STONE COPING. SPECIFIED BY 200mm X 200mm PLUS COLUMN WALL PLASTER. CABINET AS SPECIFIED BY REQUIRED. CONCRETE RISER. CONCRETE INSIDEARCHITECTALIGN DETERMINED AT SITE. Bangalore, KaT WALL TILE BASIC TILES FOR OTLA TO BE IN UPS AS PER STRUCTURAL ARCHITECT. PARKING LEVEL Bangalore, Karnataka 20mm 3 3 SUBMISSIO WALL TILE C8 50mm HIGH STONE WALL TILES PARKING LEVEL 25mm THK SOLID NOTE-G 15 SET IN BY X / 70-75 50 DRAWING S-4717/SK-01. CLADDING AS PROVIDED BY CONTRACTOR. CABINET DETAILS. UPS CABINET L28G (A-605.1 +125 MM FFL FOR TREAD. STO F7 50 D9 B6 20mm STONE CONCRETE SURFACE. SKIRTING TO CLADDING AS CLADDING AS B1/A-605. WOOD 7 6 5 4 3 AS PER 2EXPOSED 1 100 50 +125 MM FFL THK 50 APPROXB1/A-605. NOTE : FROM NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. NOTE : FROM SLAB SPANNING D8 D7 X X 40 X X SPECIFIED. L28G ( AS PER ARCHITECTURAL ARCHITECTURAL DRG REFER UTILITY AREA DRAWING FLOORING 100x100x40mm SIRA A-605 A-605.1 A-605 MATCH FLOORING FLOORING AS SIRA SPECIFIED SPECIFIED. 300 SPECIFIED. 20mm TH 5mm GROOVE IN STONE. PLY SUBSTRATE 100x100x40mm DTH OF OPENING. EQ DRGGRILL EL-101.1) TO BE FLUSHED EL-101.1) TO BE FLUSHED FOR DETAILS. SPECIFIED STONE FOR PAVING. BY MATERIAL. BYPAVING. ARCHITECT. SLOPE 50mm OFFSET IN STONE CLA AS REQUIRED 230 STONE FOR X 40mm THK ALIGN 50mm OFFSET IN WITH-STONE PROVISION FOR WITH STONE PROVISION OSED CONCRETE EXPOSEDUPS TRAP DOOR ARCHITE WALL E1 COLUMNEXPOSED DETAIL ELEVATION C8 COLUMN DETAIL - PLAN40mm C6 DETAIL SECTION ALONG C3 SECTION DETAILCOMPOUND OF THK STAIRCASE GROUND FLOOR FFL EXPOSED ON ALL 4 40mm PCC BED AS AT GF CABINET AS SPECIFIED BY THE FABRICATOR 5mm GROOVE. MASONRY WALL 5mmTHK GROOVE IN DOOR PCC BED AS ALIGN ABBY MOONWALKER 1-3W. FOR ABBY MOONWALKER SURFACE. CONCRETE WALL AS PER DETAIL 600 MM FFL AS SPEC ALIGN C CONCRETE WALL. CHAMB 3 A-605.1 3 ARCHITECT. A-605.1 1:8 A-605.1 1:8 A-605.1 1:8 A-605.1 D9 ALIGN 40 150 40 15 x15mm M.S BEHIND COLUMN. 4mm THICK M S CollectivePro FRAME AS SPECIFIED. CONCRETE WALL. CONTRACTOR TO PROVIDE X / 70-75 1-3W. CONTRACTOR TO SET IN BY 50mm CollectiveProject MORTAR TOINBE SET IN AL TILING D JOINTS SPECIFIED OPENIN A-607 UTILITY FFL MORTAR TO BE GROUND SET IN FLOOR ANGLE PAINTED TRAY. LOCATION AS EXPOSED EXPOSED CONCRETE SURFACE. SAMPLE BEFORE EXECUTION. PROVIDE SAMPLE 200 D 8 5mm GR 150mm THK RCC 50 EXPOSED EXPOSED CONC. SURFACE. APPROX BY 10mm. WITH FLOORING COMPOUND WALL ALIGN W/ W1 AND D 7NOTE-G NOTE-G 20mm THK W1 686, BETWEEN 9th A Ma AS SPECIFIED BY 10mm. 4mm THICK M +600 MM FFL 450 MM FFL MENTIONED IN UPS 100 50 CONCRETE WALL. 15 SIRA STONE BEFORE EXECUTION. 20mm THK 2-3mm THK PLATE FIXED ALL 686, 9th A Main Road,1st Stage EXP 20mm THK SIRA COLUMN. 5mm GROOVE INSS STONE. 1958/APS CONCRETE WALL. JOINTS. DRAWING. W2 SKIRTING. STONE 20mm THK STONE 20mm THK STONE 20mm THK STONE BY SIRA THE ARCHITECT. 40mm THK CABINET DETAILS. TRAY W1 D 1 OF COLUMN, CLADDING FOR STONE CLADDING AROUND BASE 20mm THK SIRA STONE Indiranagar, B CONCRET 150mm HIGHIndiranagar, STONE SKIRTING Bangalore 80mm THK 200mm X 200mm PLUS NOTE-G ALIGN X 560038 FLOORING AS SKIRTING AS100 SPECIFIED. 20mm THK. STONE 80mm THK FLOORING AS SPECIFIED CLADDING. MASONRY WALL FLOORI 310 20mm THK STONE 5mm GROOVE PAINTED TO MATCH W1 X X X X THRESHOLD OF STAFF CLADDING. 20mm THK STONE S GROUND FLOOR FFLMETAL COLUMN TO MATCH FLOORING MATERIAL. OUND FLOOR FFL 200mm X 200mm PLUS COLUMN MASONRY WALL COLUMN AS PER ON ALL 4 SIDESD 1 SPECIFIED BY T: MATERIAL +91-99COPING LAID TO MASONRYAS WALL BY ARCHITECT. SLOPE BEHIND BEAM. INF GROUND FLOOR FFL FLOORING FIXED 4 BETWEEN T: BLOCKS +91-99-00-517996 FLOORING AS TOILET AS SPECIFIED. AS PER STRUCTURAL STRUCTURAL DRAWING DECK 600 SPECIFIED MM FFL BY ARCHITECT. AS SPECIFIED. 0 MM FFL E 50ARCHITECT. 100 60mm THK STONE80 AS BEHIND EXPOSED COMPOUND WALL SLOPE W/ 5mm DECK BEHIND EXPOSED A8 150RL 50 100S-4717/SK-01. TO TRAY W/ 5mm GROOVE 600 MM FFL +520 MM EXPOSED SPECIFIED BY THE 5mm GROOVE IN DOOR S-4717/SK-01. DRAWING 150 80 CONCRETE WALL. 520 MM FFL SPECIFIED BY ARCHITECT. 3 SKIRTING. REFER UTILITY FFL ALIGN AS PER DETAIL DRIP MOULD TO A-605.1 UTILITY LEVEL CONCRETE WALL. CHAMBER 3 3 520 MM FFL ADHESIVE. D9 BETWEEN STONE FRAME AS SPECIFIED. ARCHITECT. CONCRETE AND 5mm GROOVE 2-3mm ALL 2-3mm THKSS SSPLATE PLATEFIXED FIXED ALL ALIGN F7/A-605. SPECIFIED IN 450DECK MM FFL A / 70-75 APPROX MATCH FLOORING/ IC-2 LEVEL OPENING. +450 MM FFL BETWEEN EXPOSED 20mm THK STONE FLOORING AS A-607 2 MORTAR THICKNESS EXPOSED ALIGNAND W/ W1 AND STONE A / 70-75 APPROX AROUND BASE COLUMN, GROUND 200 AROUND BASE OF OF COLUMN, GT-2 EXPOSED CONC. SURFACE. COMPOUND WALL CLADDING OF FLOOR 520SKIRTING MM SPECIFIED BY ARCHITECT. BRICK BUILDOUT DECK TO BE DETERMINED 3 3 EXPOSED CONCRETE W2 CONCRETE SKIRTING. WALL. 4mm THICK M.S. CONCRETE AND B1/A-605. 150mm HIGH STONE ROOVE STONE. VARIES BRICK IN BUILDOUT NOTE : FR NOTE : FROM B1/A-605. NOTE : FROM PAINTED TO MATCH METAL PAINTED TO MATCH METAL +600MM FFL 1 DRAWING. STEPS. NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. 20mm THK SIRA 20mm THK STONE AS REQUIRED BY AT SITE. 520 MM FFL WALL. TRAY W/ STONE TO MATCH FLOORING MATERIAL. ALIGN AS REQUIRED BY 200 COLUMN AS SPECIFIED 20MM THK STONE FLOORING AS COLUMN AS SPECIFIED BY BY X X SKIRTING X ASX SPECIFIED. -S & S NOTE : FROM B1/A-605. NOTE : FRO OUTSIDE EXPOSED CONCRETE ASSOC CONTRACTOR. 20mm THK. STONE CHAMBER FOR 15x15mm L-ANGLE FLOORING -S & S ASSOCIATES 20mm THK STONE RKING LEVEL STONE CLADDING CONTRACTOR. W 1 D 61 ARCHITECT. 5X5mm GROOVE INDSTONE BY THE E ALIGN ARCHITECT. 60mm THK SPECIFIED STONE BLOCKS ASARCHITECT.200mm X 200mm PLUS COLUMN SURFACE. COPING LAID TO SECTION ALONG W4, W5 F4 FLOORING AS DETAIL F1 ALIGN CABLES AS AS SPECIFIED BY MATERIAL INFILL. FLOOR FFL SECTION ALONG W4, W5 F4MORTAR DETAIL F1 MM FFL B AS PER STRUCTURAL ON THE OUTSIDEGROUND 3 3 20MM THK STONE SPECIFIED BY ARCHITECT. CONSULTING AS SPECIFIED THICKNESS TO BE 360 555 400 317/AP SLOPE W/ 5mm SPECIFIED BY CONSULTING ENGINEERS SECTION ARCHITECT. E6 RL A-605.1 1:8 A-605.1 1:8 SPECIFIED BY THE +520MM SLOPE DRAWING S-4717/SK-01. ON ALL 4 SIDES. 600 MM FFL A-605.1 1:8 A-605.1 DETERMINED AT SITE. BY THE ARCHITECT. DRIP MOULD TO ARCHITECT IN UPS NOTE1:8 : FROM F6/A-605.1 20mm THK STONE FLOORING AS OM B1/A-605. 1:25 ARCHITECT. A-605.1 C8 THICKNESS 926, 17th MAI 926, 17th MAIN, 3rd BLOCK, RAJAJINAGAR, 2-3mm THK SS PLATE FIXED ALL DECK MORTAR LVL225/APS 100 CABINET DETAILS. MATCH FLOORING/ SPECIFIED BY ARCHITECT. C8 ALIGN W/ W1 AND ALIGN A-605.1 TO BE DETERMINED 100x100x60mm STONE NOTE : FROM B1/A-605. NOTEA-605.1 : FROM B1/A-605. NOTE : FROM B1/A-605. DECK NOTE : FROM B1/A-605. AROUND BASE OF COLUMN, 3 3 BANGALORE +520 MM FFL DECK LEVEL CLADDING OF 3 3 3 BANGALORE-10 W2 SKIRTING. 3 AT SITE. GROOVE DETAIL AT D1 AND W1. B6 TILES AS SPECIFIED NOTE : FROM B1/A-605. NOTE : FROM F6/A-605.1 AND B7,D7/A-608. PAINTED TO MATCH METAL SECTION F6 STEPS. NOTE : FROM B1/A-605. NOTE : FROMVARIES B1/A-605. 520 MM 6 520 MM FFL STEPS CLAD WITH 200 200 SIM. BY ARCHITECT. 200mm X 200mm PLUS COLUMN A-605.1 1:8 C3 COLUMN AS SPECIFIED BY X X X OUTSIDE 1:30 A-605.1 COLUMN DETAIL -XELEVATION C8 DETAIL PLAN C6 DETAIL SECTION ALONG UPS TRAP DOOR SECTION DETAIL OF STAIRCASE AT GF C1 STONE. INSIDE 5X5mm GROOVECOLUMN 15x15mm L-ANGLE 30 N IN STONE AS PER STRUCTURAL 4 5mm GROOVE IN ARCHITECT. 3 3 N LAYOUT5mm IN TYPICAL LANDSCAPE AREA ALIGN 1:8 C A-605.1 1:8 A-605.1 TOP 1:8 A-605.1 A-605.1 1:8 AS SPECIFIED BY Deepika Mogilishetty Sandeep Farias PEDESTAL SECTION E6 PLAN OF&WINDOWS W4, W5 E3FLOORING GF AND SF STEPLIG IN DRAWING S-4717/SK-01. B STONE. L28G ( AS PER GROOVE RAILING DETAIL AS DETAIL 20MM THK STONE AS SPECIFIED ELEVATION G6 15 100 A-605.1 INSIDE ARCHITECT. 20mm THK SIRA ALIGN TILES FOR OTLA TO BE 450 MM LVL X X 401:8 X X SLOPE STONE. L28G ( AS PER ARCHITECTURAL INSIDE ARCHITECTURAL DRG 1:25 A-605.1 A-605.1 REFER A-503. SAND BED AS SPECIFIED. ALIGN BY THE ARCHITECT. WALL TILES 20mm THK CookeTown, NOTE : FROM F6/A-605.1 A-605.1 1:30 15 WALL TILES STONE COPING. DED BY CONTRACTOR. DRG EL-101.1) TO BE FLUSHED EL-101.1) TO BE FLUSHED 1958/APS EXPOSED MUD REQUIRED. 12mm THK BURMA TEAK 12mm THK INSERT PLATE AS DECK STONE LVL CLADDING AS 20mm THK STONE 3 3 CLADDING 3AS 3 WITH STONE PROVISION FOR WITH STONE PROVISION Bangalore, Karnataka +520 LIGHT ( AS PER CONCRETE TILITY AREA DRAWING ENGINEERED WOOD SPECIFIED BY STRUCTURAL LIGHT ( AS PER TILE FLOORING PARKING LEVEL SPECIFIED. MM FFL AS FLOORING ASWALL SPECIFIED DECK LEVEL EQ EQ ABBY MOONWALKER 1-3W. EXPOSED CONCRETE WALL SURFACE. FOR ABBY MOONWALKER DETAIL AT D1 AND W1. 200 DRG B6 50200 SPECIFIED. ARCHITECTURAL DRG BLOCK W/ CLEAR FOR GRILL DETAILS. CONSULTANT. EQ GROOVE EQ SPECIFIED BY BY CLADDING ARCHITECT. SLOPE +125 MM FFL FLOORING. ARCHITECTURAL 200mm XAS 200mm PLUS COLUMN 520 MM WALL PLASTER. 40mm THK STEPS CLAD WITH D CONTRACTOR TO PROVIDE 1-3W. CONTRACTOR TO EL101-103) TO BESEALER FLUSHED 40mm THK MATTE A-605.1 TO EXPOSED 1:8 SPECIFIED. ARCHITECT. COMPOUND WALL MORTAR THICKNESS TO NET AS SPECIFIED BY CONDUIT TO BE PROVIDED FOR EXPOSED ALIGN EL101-103) BE FLUSHED 100x100x40mm SIRA AS PER STRUCTURAL GROUND MASONRY WALL 5mm GROOVE IN DOOR STONE. SAMPLE BEFORE EXECUTION. PROVIDE SAMPLE 3 3 CONCRETE WALL 50mm HIGH STONE MASONRY WALL W/ STEP TREAD. COAT ON BOTH AS PER DETAIL BE DETERMINED AT SITE. CHAMBER 3 ALIGN W/ W1 AND ARCHITECT. CONCRETE WALL3 L28G IN DECK AS SPECIFIED BY D9 W/ STEP TREAD. STONE FOR PAVING. DRAWING GOOD FOF +600 MM BEHIND COLUMN. UPS CABINET OFFSETS-4717/SK-01. IN SPECIFIED. L28G ( AS PER BEFOREMUD EXECUTION. PEDESTAL TOP FRAME AS50mm 2-3mm THK SS PLATE SET IN BY 50mm SKIRTING TO EXPOSED CONCRETE BLOCKWORK. 5mm GROOVE IN BEHIND COLUMN. SIDES. SPECIFIED IN FIXED ALL RAILING DETAIL AS OPENING. W2 SKIRTING. 20mm THK STONE ELECTRICAL CONSULTANT. SETXIN/ 70-75 BY 50mm IC-2 A-607 X X 40 X X E1 15 FIRST FLOOR CONCRETE SURFACE. EXPOSED L28G ( AS PER ARCHITECTURAL ARCHITECTURAL DRG 40mm THK PCC BED AS 20mm THK STONE DRAWINGS 200 AROUND BASE OF COLUMN, GT-2 MATCH FLOORING EXPOSED CONC. SURFACE. 150mm THK RCC 450 MM LVL 50 APPROX STONE.300 M.S. 200mm X 200mm PLUS COMPOUND WALL SPECIFIED. REFER A-503. D8 D 7RCC DRAWINGS AREX NOT TO BE SCALED FLOORING AS SPECIFIED BY 150mm THK ALIGN 4mm THICK A-605.1 100 50 MORTAR THICKNESS TO BE +3800MM FFL CONCRETE WALL. DRG EL-101.1) TO BE FLUSHED EL-101.1) TO BE FLUSHED FLOORING AS SPECIFIED BY PAINTED TO MATCH METAL COLUMN X X X 20mm THK SIRA COLUMN. MATERIAL. mm GROOVE IN STONE. AS PERWITH YELLOW OXIDE AND PAINTED IN ENAME CollectiveProject DRAWING. 20mmAS THK STONE M.SCOLUMN TRAY COATED EXPOSED MUD 12mm THK BURMA TEAK 12mm THK INSERT PLATE THE ARCHITECT. 20mm THK SIRA TRAY W/ COLUMN. MORTAR TO BE SET IN ALIGN DETERMINED AT SITE. WITH STONE PROVISION FOR WITH STONE PROVISION THE ARCHITECT. PARKING LVL AS SPECIFIED BY ARCHITECT. 40x35mm SHAPED STONE CLADDINGWOOD ASEXPOSED SPECIFIED. 20mm THK. STONE X NOTE-G AS STRUCTURAL SPECIFIED BYDRAWING ARCHITECT. TRAY MADE W/ 4mm THK. MS MM MEM CONCRETE ENGINEERED SPECIFIED BYSKIRTING STRUCTURAL FLOORING 5mm GROOVE. STONE CLADDING +520 R BY 10mm. A8 W1 D1 ALL MEASU MORTAR THICKNESS BE 200mm X 200mm PLUS COLUMN ABBY MOONWALKER 1-3W. 5mmCOPING GROOVE FOR ABBY MOONWALKER DRAWN B 686,LAID 9th Stage GROUND FLOOR FFL +75 MM FFL TO EDGE ANGLE PAINTED S-4717/SK-01. ALL 4 SIDES CONCRETE ALL MEASUREMENTS ARE IN MM MORTARON THICKNESS TO BE TOA Main Road,1st 5mm GROOVE GROUND FLOOR LOCATED OVER CHAMBER BLOCK W/ CLEAR MATERIAL INFILL. FLOORING. CONSULTANT. FFL WALL.TO PROVIDE ON ALL 4 SIDES A-605.1 4mm THICK M S DETERMINED AT SITE. OPENINGS TO SUPPORT FLOORING M AS PER STRUCTURAL D BETWEEN CONTRACTOR 1-3W. CONTRACTOR TO 20mm THK SIRA STONE AS SPECIFIED 600 MM FFL AS SPECIFIED. 360 555 400 317/APS DETERMINED AT SITE. SLOPE W/ 5mm UNLESS OT BETWEEN 2-3mm SS PLATE FIXED ALL Indiranagar, Bangalore 560038 MATTE SEALER 80mm THK 600 MM FFL AS SPECIFIED. MORTAR THICKNESS TO PROVIDE GROUND FLOOR RR FLOORIN DECK LEVEL CONDUIT TO BE PROVIDED FOR UNLESS OTHERWISE SPECIFIED 20mmIN THK STONE TRAY. LOCATION AS 600X900XMM DRAWING S-4717/SK-01. ALIGN A SAMPLE BEFORE EXECUTION. EXPOSED 5mm GROOVE STONE. SAMPLE CLADDING. COFFEE BROWN LEATHER FINISH STONE DRIP MOULD TO AROUND BASE OF COLUMN, EXPOSED 5mm GROOVE IN STONE. AT SITE. UTILITY FFL 15 X15mm GROOVE ALIGN W/ W1 AND COAT ON BOTH MASONRY WALL BE DETERMINED L28G AS SPECIFIED BY 520T: MM AND +91-99-00-517996 FLOORING AS +600 MM FFL MENTIONED IN UPS CONCRETE 5mm GROOVE BEFORE EXECUTION. 2-3mm THK SS PLATE FIXED ALL IN DECK 100 225/APS 2-3mm THK SS PLATE FIXED ALL BRICK BUILDOUT. MATCH FLOORING/ THKPAINTED UNLESS SPECIFIED. (SLABS AT TRANSITIONDRAWINGS OF DIRECTION TO MATCH METAL CONCRETE AND 5mm GROOVE W2 SKIRTING. SIDES. ALIGN W/ W1 AND DECK EXPOSED CONCRETE BEHIND EXPOSED 450 MM FFL BRICK BUILDOUT. 50 ALIGN100DRAWINGS TO BE READ IN ELECTRICAL CONSULTANT. ALIGN SPECIFIED BY CABINET DETAILS. FIRST FLOOR AROUND BASE OF COLUMN, STONE BETWEEN EXPOSED 150 80 AROUND BASE OF COLUMN, CLADDING OF 200 NEED TO BEAS CUT FROM 600X900MM SLAB TO MAINTAIN ALIGNME COLUMN SPECIFIED BY 200mm X 200mm PLUS DECK 20MM THK STONE FLOORING AS STONE 3 W2 SKIRTING. 3 SURFACE. CONCRETE WALL. 520 MM FFL VARIES SHEET SI NOTE : FROM B1/A-605. 3 STONE SKIRTINGBETWEEN EXPOSED ARCHITECT. PAINTED TO MATCH METAL CONCRETE AND MORTAR THICKNESS TO BE HIGH +3800MM FFL 20mm THK STONE X X X X STEPS. CONJUNCT ARCHITECT. COLUMN AS PER SPECIFIED BY THE ARCHITECT. CONCRETE AND 520 MM FFL PAINTED TO MATCH METAL COLUMN CONJUNCTION WITH RELEVANT CONDUIT TO BE PROVIDED WALL PLASTER. COLUMN AS SPECIFIED BYDETERMINED AT SITE. A / 70-75 APPROX STONE FLOORING MATERIAL. X X X X CONDUIT TO BE PROVIDED FLOORING FIXED 3 ALIGN AS SPECIFIED BY ARCHITECT. PARKING LVL 2 40x35mm SHAPED STRUCTURAL DRAWING 3 A2 15x15mm L-ANGLE STONE SIRAFOR STONE OFIN SPECIFIED THICKNESS. ALIGN OUTSIDE EXPOSED CONCRETE MORTAR THICKNESS TO BE LIGHT STEPS AS 5X5mm GROOVE IN STONE STRUCTUR +520 MM RL ARCHITECT. A8 OUTSIDE EXPOSED CONCRETE TOLANDSCAPE TRAY W/ FOR LIGHT IN STEPS ASPAINTED AREA B1 BRICK BUILDOUT STRUCTURAL DRAWINGS ALIGN +75:MM FFLFLOORING EDGE AS SPECIFIED HK STONEBBLOCKS AS S-4717/SK-01. NOTE : FROM B1/A-605. NOTE :ANGLE FROM B1/A-606. NOTE FROM B1/A-605. LAYOUT IN DETERMINED AT SITE.BY NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. SURFACE. SPECIFIED BY ELECTRICAL 1 A-605.1 20MM THK STONE AS SPECIFIED SURFACE. AS REQUIRED BY ADHESIVE. SPECIFIEDAS BYSPECIFIED ELECTRICAL C8 1:30 A-605.1 ARCHITECT. CIFIED BY ARCHITECT. SLOPE 2-3mm SS PLATE FIXED ALL CONSULTANT. BY THE ARCHITECT. DECK LEVEL 20mm THK STONE A S & S ASSOCIATES CONSULTANT. CONTRACTOR. NOTE : FROM F6/A-605.1 ANY DISCR A-605.1 THICKNESS MORTAR PROJECT NOTEDETAIL : FROM B1/A-605. NOTE : FROM B1/A-605. NOTE : FRO AROUND BASEDISCREPANCIES OFENTRANCE COLUMN, ANY IN 15 X15mm GROOVE WATER PROOFING MATERIAL. STONE FLOORING AS COLUMN DETAIL - SECTION A8 RAILING ABOVE VESTIBULE A6 COMPOUND WALL SECTION A3 DECK LVL FLOORING ASENTRANCE 520 MM SECTION ALONG W4, W5 F4 DETAIL F1THE TO BE DETERMINED PAINTED TO MATCH METAL DIMENSION EXPOSED CONCRETE ENGINEERS CIFIED BY ARCHITECT. +520CONSULTING MM FFL SPECIFIED BY DECK LEVEL 180032.00 1:8 1:5 1:12 A-605.1 A-605.1 DIMENSIONS/SPECIFICATIONS AT SITE. A-605.1 1:8 A-605.1 BY 1:8 A-605.1 EXPOSED CONCRETE WALL SURFACE. GROOVE DETAIL AT D1 AND W1. B6 200 COLUMN AS COLUMN SPECIFIED SURFACE. 20MM THK STONE FLOORING AS DETAIL - ELEVATION C8 COLUMN FOR DETAIL FLOOR - PLAN C6 D ARCHITECT. 520 MM STEPS WITHMAIN, 3rd BLOCK, BEEL-101.1 BRO 926, 17th RAJAJINAGAR, LIGHTS/SOCKETS AS PER ARCHITECTURAL A-605.1 1:8 NOTE TO BE BROUGHT TO THE ATTENTION 5 AND B7,D7/A-608.CHAMBER 7 6 CLAD 4 A-605.1 3TODRG SPECIFIED BY THE ARCHITECT. OM B1/A-605. NOTE : FROM B1/A-605. : FROM NOTE : FROM F6/A-605.1 10 NOTE 9 8WALL PLASTER. C B1/A-605. ARCHITECT. A-605.1 1:8 1:8 : FROM F6/A-605.1 AND B7,D7/A-608. STONE. CABLES AS FS FLUSHED WITH STONE FLOORING. OF THE AR 3 3 BANGALORE-10 MORTAR THICKNESS TO BE OF THE ARCHITECT PRIOR TO SPECIFIED BY PEDESTAL TOP EXPOSED MUD CONCRETE BLOCKWORK. 5mm GROOVE IN NOTE : FROM B1/A-605. NOTE : FROM B1/A-606. NOTE : FROM B1/A-605. RAILING DETAIL AS SECTION F6 TITLE DETERMINED AT SITE. E6DETAIL DETAIL PLAN OF WINDOWS W4, W515 E3 TYPICAL GF AND SF STEPLIGHT DETAIL E1 ARCHITECT IN UPS PROCEEDI MM LVL STONE. SPECIFIED. REFER A-503. 6 DETAIL PLAN OF WINDOWS W4,450 W5 E3 TYPICAL SECTION GF AND SF STEPLIGHT E1 PROCEEDING C8 20mm THK STONE 1:30 A-605.1 CABINET DETAILS. 1:25 THK BURMA TEAK 1:8 1:8 PAINT A-605.1 A-605.1 A-605.1 M.S TRAY COATED WITH YELLOW OXIDE AND PAINTED IN ENAMEL EXPOSED MUD 12mm 12mm THK INSERT PLATE AS N A-605.1 25 1:8 1:8 A-605.1 A-605.1 FLOORING AS SPECIFIED COLUMN DETAIL SECTION A8 RAILING DETAIL ABOVE ENTRANCE VESTIBULE A6 ENTRANCE COMPOUND WALL SECTION A3 LEGEND NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. NOTE : FROM B1/A-605. AS SPECIFIED BY ARCHITECT. TRAY MADE W/ 4mm THK. MS MEMBERS CONCRETE ENGINEERED WOOD SPECIFIED BY STRUCTURAL BY ARCHITECT. 3 3 1:8 1:5 1:12 3 3 A-605.1 A-605.1 A-605.1 INSIDE LOCATED OVER CHAMBER OPENINGS TO SUPPORT FLOORING MATERIAL. BLOCK W/ CLEAR FLOORING. CONSULTANT. A-605.1 ALIGN WALL TILES 5mm GROOVE IN DOOR EXPOSED MATTE SEALER MORTAR THICKNESS TO COLUMN DETAIL - ELEVATION C8 COLUMN - PLAN C6 DETAIL SECTION ALONG UPS TRAP DOOR C3 DETAIL OF STAIRC 200 CONDUIT TO BE 9 PROVIDED FOR 200 EXPOSED DETAIL ALIGN CLADDING AS 3 3 5 7 6 4 3 2 SECTION 1 10 200mm X 200mm PLUS COLUMN 8 D9 WALL PLASTER. 600X900XMM COFFEE BROWN LEATHER FINISH STONE FLOORING. 20MM FRAME AS SPECIFIED. CONCRETE RISER. COAT ON BOTH WALL PLASTER. BE DETERMINED AT SITE. L28G IN DECK AS SPECIFIED BY CONCRETE RISER. LIGHT ( AS PER A-605.1 1:8 A-605.1 1:8 A-605.1 1:8(SLABS AT TRANSITION OF DIRECTION MAY A-607 32 AS C PER STRUCTURAL THK UNLESS SPECIFIED. SPECIFIED. 3 3 SUBMISSION SIDES. 200 50mm HIGH STONE EXPOSED CONC. SURFACE. 25mm THK SOLID ELECTRICAL CONSULTANT.50mm HIGH STONE EQ EQ SUBMISSION 32 19/10/2020 FIRST FLOOR ARCHITECTURAL DRG 25mm THK SOLID DRAWING S-4717/SK-01. NEED TO BE CUT FROM 600X900MM SLAB TO MAINTAIN ALIGNMENT.) UPS CABINET L28G THK ( AS PER SKIRTING TO 40mm UPS CABINET MORTAR WOOD 20mm THK STONE THICKNESS TO BE EXPOSED 20mm THK FOR TREAD. +3800MM FFL SKIRTING TO EL101-103) TO BE FLUSHED X X 40 X X WOOD FOR TREAD. 15 L28G ( AS PER ARCHITECTURAL ARCHITECTURAL MASONRY WALL DRG MATCH FLOORING 1 300W/ STEP TREAD. DRAWING SKIRTING AS SPECIFIED. DETERMINED AT SITE. CONCRETE WALL STONE PLY SUBSTRATE 20mm THK40x35mm STONE SHAPED MATCH FLOORING PARKING LVL PLUS COLUMN 300FLUSHED W 1OF SPECIFIED THICKNESS. D1 DRG EL-101.1) TO BE EL-101.1) TO BE FLUSHED 200mm X 200mm PLY SUBSTRATE SIRA STONE MATERIAL. BEHIND COLUMN. FLOORING AS AS REQUIRED BY MATERIAL. GROUND FLOOR FFL FLOORING AS SPECIFIED ALIGN +75 MM FFL EDGE ANGLE PAINTED WITH STONE PROVISION FORSET IN BY 50mm WITH STONE PROVISION AS PER STRUCTURAL 20mm THK STONE AS REQUIRED BY ALIGN DRAWINGS ARE NOT TO BE SCALED SPECIFIED BY 150mm THK RCC THE FABRICATOR 5mm GROOVE. 50 ABBY MOONWALKER 1-3W. BY ARCHITECT. SLOPE 600 MM FFL AS SPECIFIED DRAWING S-4717/SK-01. FOR ABBY MOONWALKER FLOORING AS SPECIFIED BY THE FABRICATOR 5mm GROOVE. 20mm THK STONE A ARCHITECT. COMPOUND WALL COLUMN. 15 x15mm M.S 4mm THICK MS CONTRACTOR TO PROVIDE 20mm THK SIRA 1-3W. CONTRACTOR TO IN 15 DOOR X15mm GROOVE THE ARCHITECT. WATER PROOFING MATERIAL. 2-3mm THK SS PLATE FIXED ALL 5mm GROOVE 15 x15mm M.S 4mm THICK M S FLOORING AS STONE CLADDING AS PER DETAIL ALIGN W/ W1 AND GROUND FLOOR CHAMBER 3 3 ANGLE PAINTED LOCATION AS SAMPLE BEFORE EXECUTION. PROVIDE SAMPLE EXPOSED CONCRETE AROUND BASE OFMEASUREMENTS COLUMN, FRAME AS SPECIFIED. ANGLE PAINTED ALL ARE IN MM MORTAR THICKNESS TO BE D9 TRAY. TRAY. LOCATION AS SPECIFIED BY 5mm GROOVE DECK ALIGN W/ W1 AND GROUND FLOOR 3 3 ON ALL 4 SIDES W2 SKIRTING. SPECIFIED IN OPENING. AS SPECIFIED +600 MM FFL IN UPS METAL A-607 MENTIONED BEFORE EXECUTION. SURFACE. PAINTED TO MATCH 2-3mm THK SS PLATE FIXED ALL AS SPECIFIED DETERMINED AT SITE. +600 MM FFL ARCHITECT. MENTIONED IN UPS BETWEEN 200 GT-2 EXPOSED CONC. SURFACE. 520 MM FFL W2 SKIRTING. AS SPECIFIED. WALL AS PER ARCHITECTURAL FLOORCOMPOUND LIGHTS/SOCKETS DRGBY EL-101.1, TO BE UNLESS OTHERWISE SPECIFIED THE ARCHITECT. CABINET DETAILS. COLUMN AS SPECIFIED BY 4mm THICK M.S. WALL PLASTER. X X X GROOVE X AROUND BASE OF COLUMN, BY THE ARCHITECT. CABINET DETAILS. EXPOSED 5mm IN STONE. 200mm X 200mm PLUS DRAWING. FLUSHED WITH STONE FLOORING. FS 20mm THK STONE 5X5mm GROOVE IN STONE ARCHITECT. TRAY W/THK STONE 20mm THK STONE PAINTED TO MATCH METAL COLUMN X X X X 20mm COLUMN ASAND PER CONCRETE 5mm GROOVE 20mm THK STONE BRICK BUILDOUT. 20mm THK STONE NOTE : FROM B1/A-605. NOTE : FROM B1/A-606. NOTE : FROM B1/A-605. ALIGN SKIRTING AS SPECIFIED. 20mm THK. STONE B FLOORING TO BE READ IN 20MM THK DRAWINGS STONE FLOORING FIXED AS SPECIFIED AS SPECIFIED BY ARCHITECT. W1 D1 FLOORING AS 200mm X 200mm PLUS COLUMN STRUCTURAL DRAWING STONE BETWEEN EXPOSED FLOORING FIXED FLOORING COPING LAID TO +520 MM RL AS A8 MATERIAL INFILL. GROUND FLOOR FFL BY THE ARCHITECT. TO TRAY W/ +520 MM RL NOTERELEVANT : FROM F6/A-605.1 SPECIFIED BY THE AS PER STRUCTURAL S-4717/SK-01. CONCRETE AND TO TRAY W/ A-605.1 Copyright 2014 WITH SPECIFIED BY THE 360 SLOPE W/ 5mm CONDUIT TO BE PROVIDED COLUMN DETAIL - SECTION A8 RAILING DETAIL ABOVE ENTRANCE VESTIBULE A6 ENTRANCE COMPOUND WALL SECTION ADHESIVE.CONJUNCTION A3 LEGEND 600 MM FFL ARCHITECT.A1 DRAWING S-4717/SK-01. STONE is not to be rep ALIGN ADHESIVE. 2-3mm SS PLATE FIXED ALL ARCHITECT. DRIP MOULD TO DECK LEVEL OUTSIDE EXPOSED CONCRETEA-605.1 FOR LIGHT IN STEPS AS A-605.1 MORTAR DECK LEVEL STRUCTURAL DRAWINGS THICKNESS 1:8 1:5 1:12 NTS A-605.1 A-605.1 purpose225/AP other 2-3mm THK SS PLATE FIXED ALLAROUND BASE OF COLUMN, GROOVE DETAIL AT D1 AND W1. B6 GROUND FLOOR 100 MORTAR THICKNESS MATCH FLOORING/ SURFACE. GROUND FLOOR SPECIFIED BY ELECTRICAL 520 MM ALIGN W/ W1 AND 520 MM TO BE DETERMINED AROUND BASE OF COLUMN, MATCH METAL TO +600MM 5 A-605.1 7 PAINTED TODECK 6 4 3 VARIES 2 OF 1 FFL1:8 CLADDING 10 9 8 CONSULTANT. 3 BE DETERMINED W2 SKIRTING. 3 +600MM FFL AT SITE. ANY DISCREPANCIES NOTE : FROM B1/A-605. PAINTED TO MATCH METAL IN THE 200 COLUMN AS SPECIFIED BY AT SITE. 20MM THK STONE FLOORING AS STEPS. 520 MM FFL CHAMBER PEDESTAL FOR TOP COLUMN AS SPECIFIED BY ARCHITECT. RAILING DETAIL AS X X X X SPECIFIED BY THE ARCHITECT. CHAMBER FOR DIMENSIONS/SPECIFICATIONS 15x15mm L-ANGLE CABLES AS 5X5mm GROOVE IN STONE 450 MM LVL ARCHITECT. SPECIFIED. REFER A-503. LAYOUT IN LANDSC CABLES AS FLOORING 3 3 ALIGN AS SPECIFIED BY MORTAR SPECIFIED BY BE B THICKNESS TO BE TO BROUGHT TO THE ATTENTION 12mm THK+520MM BURMA RL TEAK 12mm THK INSERT PLATE AS 20MM THK STONE AS SPECIFIED SPECIFIED BY DETERMINED AT SITE. NOTE : FROM B1/A-605. ARCHITECT. NOTE : FROM F6/A-605.1 +520MM AND B7,D7/A-608. RL ARCHITECT INSTRUCTURAL UPS SLOPE ENGINEERED SPECIFIED BY BY THE ARCHITECT. ARCHITECT IN UPS C8 MORTARWOOD THICKNESS NOTE : FROM F6/A-605.1 OF THE ARCHITECT PRIOR TO MORTAR THICKNESS CABINET DETAILS. FLOORING. CONSULTANT. DECK LVL CABINET DETAILS. A-605.1 TO BE DETERMINED NOTE : FROM B1/A-605. OM B1/A-605. NOTESECTION NOTE : FROMPLAN B1/A-605. NOTETO : FROM B1/A-605. BE AND DETERMINED NOTE :DECK FROM B1/A-605. : FROM B1/A-605. E6 DETAIL OF WINDOWS W4,LEVEL W5 E3 TYPICAL GF SF STEPLIGHT DETAIL E1 MORTAR THICKNESS TO PROCEEDING CONDUIT TO BE PROVIDED FOR +520 MM FFL ALIGN AT SITE. AT SITE. AT D1 AND W1. GROOVE DETAIL B6 BE DETERMINED AT SITE.EXPOSED CONCRETE WALL SU L28G IN DECK AS SPECIFIED BY 1:25 1:8 1:8 A-605.1 A-605.1 A-605.1 520 MM STEPS CLAD WITH COLUMN DETAIL - ELEVATION C8 COLUMN DETAILDETAIL - PLANOF STAIRCASE C6 AT GF DETAIL SECTION DOOR C3 CONSULTANT. SECTION DETAIL OF STAIRCASE AT GF C1 A-605.1 ALONG UPS TRAP 1:8 ELECTRICAL FIRST FLOOR 6 DETAIL SECTION ALONG UPS TRAP DOOR C3 SECTION C1 STONE. 3 MORTAR A-605.1 1:8 A-605.1 1:8 A-605.1 1:8 THICKNESS TO BE A-605.1 1:8 +3800MM FFL 8 A-605.1 1:8 A-605.1 1:8 PEDESTAL TOP EXPOSED MUD CONCRETE BLO 5mm GROOVE IN EXPOSED RAILING DETAIL AS DETERMINED AT SITE. 200 15 40x35mm SHAPED WALL PLASTER. 450 MM LVL STONE. CONCRETE RISER. SPECIFIED. REFER A-503. 20mm THK EDGE ANGLE PAINTED 15 20mm THK 1958/APS 15 3 3 SUBMISSION 32 19/10/2020 M.S TRAY COATED WITH YELLO EXPOSED MUD STONE 12mm THK BURMA TEAK 12mm THK INSERT PLATE AS 50mm HIGH STONE 20mm THK STONE 25mm THK SOLID 1958/APS AS SPECIFIED STONE UPS CABINET L28G ( AS PER A AS SPECIFIED BY ARCHITECT. T CONCRETE FLOORING AS ENGINEERED WOOD SPECIFIED SKIRTING TO FLOORING AS SPECIFIED WOOD FOR TREAD. FLOORING AS BY STRUCTURAL 15 X15mm GROOVE X X 40 X X ARCHITECTURAL DRG LOCATED OVER CHAMBER OPE BLOCK W/ CLEAR SPECIFIED BY CONSULTANT. MATCH FLOORING BY ARCHITECT. SLOPE FLOORING. 300 PLY SUBSTRATE SPECIFIED BY SLOPE EXPOSED CONCRETE EL-101.1) TO BE FLUSHED MATTE SEALER ARCHITECT. COMPOUND WALL MATERIAL. MORTAR THICKNESS TO CONDUIT TO BE PROVIDED FOR ALIGN AS REQUIRED BY ARCHITECT. COMPOUND WALL SURFACE. 5mm GROOVE INALIGN DOOR 600X900XMM COFFEE BROWN L WITH STONE PROVISION COAT ON BOTH AS PER DETAIL BE DETERMINED AT SITE. CHAMBER 3 3 L28G IN DECK AS SPECIFIED BY5mm GROOVE. D9 THE FABRICATOR AS PER DETAIL FRAME AS SPECIFIED. CHAMBER WALL PLASTER. THK UNLESS SPECIFIED. (SLAB D9 FOR ABBY MOONWALKER SIDES. SPECIFIED IN OPENING. ELECTRICAL IC-2 A-607 FIRST FLOOR SPECIFIED IN 15 x15mm M.S OPENING. CONSULTANT. 4mm THICK M S NEED TO BE CUT FROM 600X90 IC-2 A-607 1-3W. CONTRACTOR TO 200 GT-2 EXPOSED CONC. SURFACE. COMPOUND WALL NOTE : FROM B1/A-605. NOTE NOTE : FRO GT-2 LOCATION AS 4mm THICK M.S. : FROM B1/A-606. COMPOUND WALL MORTAR THICKNESS TO BE GROUND FLOOR +3800MM FFL ANGLE PAINTED TRAY. PROVIDE SAMPLE 4mm THICK M.S. DRAWING. 20mm THK STONE TRAY W/ DETERMINED AT SITE. AS SPECIFIED +600 MM FFL DRAWING. MENTIONED IN UPS PARKING LVL BEFORE EXECUTION. 40x35mm SHAPED TRAY W/ SIRA STONE OF SPECIFIED THIC SKIRTING AS SPECIFIED. 20mm THK. STONE FLOORING COLUMN DETAIL SECTION A8 RAILING DETAIL ABOVE ENTRANCE VESTIBULE A6 BY THE ARCHITECT. 20mm THK. STONE W 1 D 1 CABINET DETAILS. 200mm X 200mm PLUS COLUMN +75 MM FFL EDGE ANGLE PAINTED FLOORING 200mm X 200mm PLUS COPING LAID TO MATERIAL INFILL. GROUND FFL COPING LAIDFLOOR TO BASIC TILES FOR OTLA TO BE NOTE : FROM PROVIDED BY CONTRACTOR.

PgGOOD 23 FOR C DRAWN BY

FORM FINISH DRAWING PROFESSIONAL TRAINING - COLLECTIVE PROJECT / COURTYARD HOUSE

Pg 24

PROFESSIONAL TRAINING - SDEG

Pg 25

PRODUCED B Notes : C

AS_01

3. 4. 5.

FFL +18.20m SFL +17.70m

TERRACE ROOF

8. 04

40mm thick plaster beading all around.

SD2

TERRACE LEVEL

10mm thk plaster groove to align with beam top edge.

Provision for Electrical point for signage. SD2

1350

AD7

SD2

AD5

FFL +9.20m SFL +9.15m

SECOND FLOOR AD7

AD7

SD2

AD5

FFL +6.35m SFL +6.30m

FIRST FLOOR AD7

SD2

AD5

Provision for Light point.

10mm thk plaster groove to align with beam top edge.

10mm thk plaster groove to align with beam bottom edge.

10mm thk plaster groove to align with beam top edge.

10mm thk plaster groove to align with beam bottom edge.

10mm thk plaster groove to align with beam top edge.

LEGENDS (Hatch pa

Brick cladding

[ PP 06 ER[ VHFWLRQ DV KDQGUDLO [ PP 06 ER[ VHFWLRQ DV KDQGUDLO [ PP 06 )ODW DV YHUWLFDOV ZHOGHG EHWZHHQ [ PP 06 )ODW DV KDQGUDLO DQG ERWWRP UDLO YHUWLFDOV ZHOGHG EHWZHHQ KDQGUDLO DQG ERWWRP UDLO [ PP 06 ER[ VHFWLRQ EQ DV ERWWRP UDLO [ PP 06 ER[ VHFWLRQ DV ERWWRP UDLO PP WKN JUDQLWH FRSLQJ

Provision for Light point.

6&$/(

1350

A 75

AD8

STILT FLOOR AD9

PLAN

SCALE 1:60

DATE

STRUCTURAL CONS ECO CONSULTANTS

A6,Vijaya Arch, 2A cro HRBR layout,2nd Block, Kalyan Nagar,Bengalu Email: ecocon@gmail.c

PP WKN JUDQLWH FRSLQJ

0.00m

ROAD LEVEL

WEST SIDE ELEVATION WEST SIDE ELEVATION

No. of

01 EQ 03/11/20 Easter S.NO.

[ PP 06 ER[ VHFWLRQ DV ERWWRP UDLO [ PP 06 ER[ VHFWLRQ DV ERWWRP UDLO [ PP 06 )ODW DV YHUWLFDOV ZHOGHG EHWZHHQ [ PP 06 )ODW DV KDQGUDLO DQG ERWWRP UDLO YHUWLFDOV ZHOGHG EHWZHHQ KDQGUDLO DQG ERWWRP UDLO PP FOHDU GLVWDQFH WR EH PDLQWDLQHG IURP WKH PP FOHDU GLVWDQFH WR ILUVW IODW WR WKH ILQLVKHG EH PDLQWDLQHG IURP WKH ZDOO VXUIDFH ILUVW IODW WR WKH ILQLVKHG ZDOO VXUIDFH [ PP EDVH SODWH DQFKRUHG WR WKH ZDOO [ PP EDVH SODWH DQFKRUHG WR WKH ZDOO PP WKN JUDQLWH FRSLQJ

1350 75 HT GLY § PP F F 75 HT GLY § PP F F

AD1

FFL +0.65m SFL +0.60m

03/11/20 flight

6&$/(

AD6

16/12/20 South

SECTION

AD2

AD1

#27/1,2nd floor,7th ma 8th cross,Jayanagar II b Bengaluru -11. SECTION-AA' ELE www.sanconsultants.in 6&$/( 6&$ SECTION-AA'

10mm thk plaster groove to align with beam top edge.

AD7

MEP CONSULTANT SAN DESIGN CONS

AD7

White paint sha Architect.

PP WKN NHUE ZDOO WR EH EXLOW XSWR PP KLJK PP WKN NHUE ZDOO WR EH IURP 6)/ EXLOW XSWR PP KLJK IURP 6)/

FFL +3.50m SFL +3.45m

GROUND FLOOR

Cement finish by Architect.

PP WKN JUDQLWH FRSLQJ

ELEVATION FROM OUTSIDE ELEVATION FROM OUTSIDE 6&$/( ELEVATION FROM OUTSIDE

10mm thk plaster groove to align with beam bottom edge.

Paint shade as

[ PP EDVH SODWH DQFKRUHG WR WKH ZDOO [ PP EDVH SODWH DQFKRUHG WR WKH ZDOO

870

THIRD FLOOR

1170

HT GLY § PP F F

100

FFL +12.05m SFL +12.00m

HT GLY § PP F F

130

PRODUCED BY AN AUTODESK STUDENT VERSION

AD5

PRODUCED BY AN AUTODESK STUDENT VERSION 130 100 870

1170 AD5

100

SD2

10mm thk plaster groove to align with beam bottom edge.

1050

40mm thick plaster beading all around.

10. 10mm thk plaster groov and along beam edge 11. This drawing to be read Architectural detail dra

870

Provision for Electrical point for signage.

SD2

100

FFL +14.90m SFL +14.85m

Drawings to be read in c architectural and projec Discrepancies to be brou prior to commencement All dimensions in meters Do not scale any measu All dimensions shall be ve and any discrepancy sh architect. Door / Window openings site(before and after pla Architect. Dimensions of with Schedule of openin brought to the attention All levels shown in drawin levels. Structural levels ar understanding. Any disc attention of architect pri centering works All roof slabs, toilets sunk have waterproofing / ins engineering consultants recommendations All staircases headroom Architects prior to concr

1050

870

RAILING DETAIL - PLAN

APARTMENT @ JALA

Client :

MR. CHANDRASHEK

Architect : SDeG

# 439, Second Floor, 9t PLA HAL II stage, Bengaluru 6&$ tel: +91 80 2529 1418 / www.sdeg.in

6&$/( EAST SIDE ELEVATIONPLAN SCALE 1:60 6&$/(

Project Title:

Drawing Title

PROFESSIONAL TRAINING - SDEG / JALAHALLI APARTMENTS

SCHEDULE OF OPENING Types

Sill Height

Lintel Height

MD1

1.05m x 2.25m

Size

2.25m

0.75m x 2.25m

WOODEN DOORS

Compound wall detail

2.25m

AD2

Glazing detail

AD3

Seater detail

AD4

Staircase railing detail

UPVC/ALUMINIUM DOORS SD1

3.00m x 2.25m

2.25m

SD2

1.35m x 2.25m

2.25m

GD1

1.50m x 2.25m

2.25m

LEGENDS (Tags)

LEGENDS (Details) AD1

Lift opening as per vendor specification

450mm high kerb wall

Sliding partition as per vendor detail

ELEVATION Pg 26 01 A ELEVATION 02 Scale

Dat

PRODUCED BY AN AUTODESK STUDENT VERSION

beam bottom edge.

PLAN PLAN PLAN GRILL PLAN

DETAIL - PLAN

SCALE 1:20 1:20 SCALE SCALE 1:20 SCALE 1:20

A' A'

Window Window as as per per selection selection

10mm thk plaster groove to align with beam top edge.

WEST SIDE EASTELEVATION SIDE ELEVATION EAST SIDE ELEVATION SCALE 1:60SCALE 1:60

SCALE SCALE 1:5 1:5

20 20

SCALE 1:5

SCALE 1:5 SCALE 1:5

25 25

Size

Sill Height

AD1

Compound wall detail

MD1

1.05m x 2.25m

2.25m

0.75m x 2.25m

2.25m

AD2

Glazing detail

AD3

Seater detail

AD4

Staircase railing detail

UPVC/ALUMINIUM DOORS SD1

3.00m x 2.25m

2.25m

SD2

1.35m x 2.25m

2.25m

GD1

1.50m x 2.25m

2.25m

LEGENDS (Tags)

LEGENDS (Details)

Lintel Height

WOODEN DOORS

Lift opening as per vendor specification

450mm high kerb wall

Sliding partition as per vendor detail

# 439, Second Floor, 9th Main, 2nd Cross, tel: +91 80 2529 1418 / 7494 20 www.sdeg.in SCALE 1:60

DETAIL-A

20 20

ELEVATION 01 AND ELEVATION 02

HT GLY § PP F F

HT GLY § PP F F 1300

VARIES VARIES

1300 50 50

50 50

8 HT GLY § PP F F

1300

HT GLY § PP F F

950

VARIES VARIES

950

20 25

Date

Drawing Titl

Drawing Titl MR. CHANDRASHEK

[ PP WKN 06 [ P [ PP WKN 06 12mm thk MS flat 12mm flat 20 25 thk MS 25 GRILL DET flat flat inserted GRILL flat DET inserted into into masonry masonry for for anchorage. anchorage.

Scale Scale Drawn

DETAIL C DETAIL DETAILCB DETAIL B SCALE 1:5 SCALE SCALE1:5 1:5

8 8SCALE 1:5SCALE 1:5

Size

Sill Height

Lintel Height

MD1

1.05m x 2.25m

2.25m

0.75m x 2.25m

WOODEN DOORS

Project No.

SOO_-

Drawing Title

SCHEDULE OF OPENING

Types

# 439, Second Floor, 9t Rakshith Rakshith HAL II stage, Bengaluru D No. tel: +91 80 Drawing 2529 1418 / Drawing No. SC www.sdeg.in SOO_-

50DETAIL DETAIL B B

SCALE 1:5 DETAIL-B

Compound wall detail

2.25m

AD2

Glazing detail

AD3

Seater detail

AD4

Staircase railing detail

SD1

3.00m x 2.25m

2.25m

SD2

1.35m x 2.25m

2.25m

GD1

1.50m x 2.25m

2.25m

LEGENDS (Tags)

LEGENDS (Details)

AD1

UPVC/ALUMINIUM DOORS

Scale

6HFRQG 6HFRQG HAL IIII stage, stage, B B HAL WHO WHO www.sdeg.in www.sdeg.in

Architect : NTS NTS II A3 A3 S D e G Drawn

PRODUCED BY AN AUTODESK STUDENT VERSION

SCHEDULE OF OPENING Types

25 25

Window as Window per as per selection selection

20 20

Window as per Window as per [ PP WKN 06 [ PP WKN 06 selection selection flat flat

HAL II stage, - 560 008 DETAIL DETAIL A Bengaluru A

ELEVATION 20 SCALEEAST 20SCALE 20SIDE1:5 20 1:5

Wind selec

S SD De eG G

20 20

[ PP WKN 06 [ PP WKN 06 flat Client flat

[ PP WKN 06 [ PP WKN 06 flat flat

Drawing Title

PROFESSIONAL TRAINING - SDEG / JALAHALLI APARTMENTS

20 20

Architect : SDeG

20 20

12 20 20

DETAIL B DETAIL DETAIL A DETAIL A B SCALE 1:5

AD1

20 20

12 12

DETAIL DETAIL A A

20 25

AD6

STILT FLOOR

ROAD LEVEL

Window as per Window as per Project Title: selection selection

Window Window as as per per selection selection

20 20 20 20

MR. CHANDRASHEKAR

AD8

AD9

Client Client :: MR. CHAND CHAND MR.

[ PP WKN 06 [ PP WKN 06 flat flat

Client :

Window Window as as per per selection selection

0.00m

PLAN PLAN SCALE 1:20 SCALE 1:20

20 25

50 50

[ PP WKN 06 [ PP WKN 06 flat flat

AD1

#27/1,2nd floor,7th ma 8th cross,Jayanagar II Project Title Project TitleA BengaluruA' -11. www.sanconsultants.in APARTMENT APARTMENT

DETAIL C DETAIL C

Architect :: APARTMENT @ JALA Architect 20 20

50 50

FFL +0.65m SFL +0.60m

AD1

AD2

88 AD6

VW )ORR

VW )ORR MEP CONSULTANT %KXYDQDJLUL 2 %KXYDQDJLUL 2 email: anand SAN DESIGN email:CONS anand

ODUCED ED ODESK AUTODESK BY AN STUDENT BY AUTODESK STUDENT AN AUTODESK VERSION VERSION STUDENT STUDENT VERSION VERSION

AD2

Bengaluru -11

APARTMENT @ JALAHALLI

25 25

DATE MEP MEP CONSU CONSU

Bengaluru -11 A6,Vijaya Arch, 2A cro EQ EQ EQ EQ www.sancon www.sancon HRBR layout,2nd Block, QS Kalyan Nagar,Bengalu QS CONSUL CONSUL A A Email: ecocon@gmail. GCA GCA COST COST

#27/1,2nd floor,7th main, DETAIL C C DETAIL 8th cross,Jayanagar II block, Bengaluru -11. 10mm thk plaster groove to align with www.sanconsultants.in

Email: Easte 03/11/20 Email: ecocon ecocon

S.NO.

A A

A6,Vijaya Arc A6,Vijaya Arc No. o

1350 SAN SAN DESIGN DESIGN CONS QG IORR 50 STRUCTURAL 50 50 QG IORR 1220 1220CONSULTANTS 8th ECO 8th cross,Jaya cross,Jaya

10mm thk plaster groove to align with beam top edge.

STRUCTURA STRUCTURA ECO ECO CONSU CONSU South 16/12/20

1350

50 EQ EQ

20 20 20 20

8 50 1670

MEP CONSULTANT

DETAIL C DETAIL CCONSULTANTS SAN DESIGN

AD7

20 20

1300 950

1220 1220 1670

SCALE 1:20 SCALE 1:20 SCALE 1:20

Window as as Window Window as Window as Window as Window as per selection selection 50 per selectionper per selection per selection per selection 50 50 50 50 [ PP 06 W2 [ PP 06 [ PP 06 [ PP 06 [ PP 06 [ PP 06 IODW IL[HG IODW IL[HG IODW IL[HG IODW IL[HG IODW IL[HG IODW IL[HG EQ around the the around around the around the at around the around the periphery periphery at periphery atperiphery peripheryperiphery at at 50 mm mmat offset 50 offset A A 50 mm offset50 mm 50 mm offset 50 mm offset fromoffset finished finished from finishedfromfrom finished from finished from finished surface. surface. surface. surface. surface. surface. 12mm thk 12mm thk MS MS 12mm thk MS12mm thk MS 12mm thk12mm MS thk MS flat inserted inserted flat inserted flat flat inserted flat inserted flat inserted into masonry into masonry into masonryintofor masonry into masonry into masonry DETAIL Cfor DETAIL for for for forC anchorage. anchorage. A' A' anchorage. anchorage. anchorage. anchorage. Window grill grill Window Window grill Window grill Window grill Window grill WR EH IL[HG WR EH IL[HG WR EH IL[HG WR EH IL[HG WR EH IL[HG WR EH IL[HG after 20 20 mm mm after W2 PLAN PLAN after 20 mm after 20 mm after 20 mm after 20 mm from finished finished from from finishedfromsurface. finished SCALE 1:20 fromSCALE finished from 1:20finished surface. surface. surface. surface. surface. 12mm Ø MS 12mm Ø MS 12mm Ø MS 12mm Ø rod. MS 12mm Ø 12mm MS Ø MS brite brite rod. britebrite rod.rod. brite rod.brite rod. 25

1800

Project Title:

A6,Vijaya EQ Arch, 2A cross, EQ HRBR layout,2nd Block, Kalyan Nagar,Bengaluru-43 Email: ecocon@gmail.com

12mm thk MS 12mm DETAIL C thk MS flat flat inserted inserted into into masonry masonry for for anchorage. anchorage. Window Window grill grill WR EH IL[HG WR EH IL[HG after 20 mm after 20 mm PLAN PLAN from finished finished from SCALE 1:20 SCALE 1:20 surface. surface. 12mm 12mm Ø Ø MS MS brite rod. rod. brite

White02paint sha 02 Architect.

SECTION SCALE 1:20 SCALE 1:20

EQ EQ EQ EQEQ

Provision for Light point.

AD7

1670

1350 1350 1800

1133

50 50

1800

12 12

10mm thk plaster groove to align with beam top edge.

1250

HT GLY § PP F F

1800 50 STRUCTURAL CONSULTANT 50 50 50 50 1670 ECO CONSULTANTS

FFL +3.50m SFL +3.45m

GROUND FLOOR

REVISION

10mm thk plaster groove to align with beam bottom edge.

50 [ PP 06 [ PP 06 IODW IL[HG IODW IL[HG around the the around periphery at at periphery 50 mm offset 50 mm offset from finished from finished surface. surface.

Provision for Light point.

DATE

S.NO.

AD5

Window Window as as per per selection selection

Cement finish by Architect. 03

HRBR 02 03/11/20 HRBR layout,2 layout,2 SECTION-AA' flight SECTION-AA' .DO\DQ 1DJDU ELEVATION ELEVATION FROM FROMELEVATION INSIDEELEVATION FROM INSIDE FROM INSIDEA'.DO\DQ 1DJDU A SCALE 1:20INSIDE

AD5

A' A'

W2SD2

100m

SD2

LEGENDS (Hatch pa 100m

50mm

PLAN PLAN

A' A'

ELEVATION FROM INSIDE

SCALE 1:20 01 03/11/20 beam top edge. SCALE 1:20 SCALE 1:20 Eastern & southern setbacks revised

SCALE 1:20 SCALE 1:20

DETAIL C

200m 200m

50mm Brick cladding

AD7

No. of risers changed to 17 for each

DETAIL DETAIL C C

150m 150m

25 25

AD5

A A

SCALE SCALE 1:20 1:20

Provision for Light point.

EQ EQ

Terrace Terrace Roof Roof

LEGENDS LEGENDS (H (H

16/12/20 South & East side setbacks revised

20 20

AD5

DETAIL DETAIL B B [ PP 06 IODW [ PP 06 IODW IL[HG DURXQG WKH IL[HG DURXQG WKH periphery periphery at at 50 50 mm mm offset offset from from finished surface. finished surface.

01 01 DAT S.NO. DAT S.NO.

1670 1670

SD2

10. 10mm thkGround plaster floor groov Ground floor and along beam edge )LUVW IORRU )LUVW IORRU 11. This drawing to befloor read Second Second floor Architectural detail dra Third Third floor floor Terrace floor Terrace floor

EQ EQ

SD2

White paint shade as specified by Architect.

03/11/20 flightFROM INSIDE ELEVATION ELEVATION FROM 10mm thk plasterELEVATION ELEVATION ELEVATION FROM INSIDE FROMELEVATION INSIDE FROM INSIDE FROM INSIDE INSIDE groove to alignSCALE with 1:20

50 50

[ PP 06 [ PP 06 IODW IL[HG IODW IL[HG around the around the peripheryperiphery at at 50 mm 50 mm offset from offset from finished finished surface. surface.

Drawings to b Drawings to b architectural A architectural Discrepancie

Paint shade as

Cement finish texture paint as specified 10mm thk plaster groove to align with by Architect. beam bottom edge.

1800 1800

50 50

12mm thk12mm MS thk MS flat inserted flat inserted into masonry into masonry for for anchorage. anchorage. 20 20

Paint shade as specified by Architect.

AD7

10mm thk plaster groove to align with beam top edge.

12 12 12

SCALE 1:20 SCALEAD7 1:20

Brick cladding as specified by Architect. 1133

50 A' A'

ELEVATION ELEVATION FROM FROM INSIDE INSIDE

LEGENDS (Hatch patterns)

10mm thk plaster groove to align with beam bottom edge.

AD5

Window as Window as per selection. per selection.

12mm thk MS12mm thk MS flat inserted flat inserted into masonryinto masonry for for 12mm anchorage. anchorage. 12mm thk thk MS MS flat flat inserted inserted into masonry into masonry for for anchorage. anchorage. [ PP 06 [ PP 06 W2 IODW IL[HG IODW IL[HG around the around the [ PP 06 periphery atperiphery at [ PP 06 IODW IL[HG 50 mm 50 mm IODW IL[HG around offset from offset from around the the periphery finished finished periphery at at 50 surface. surface. 50 mm mm offset offset from finished from finished surface. surface.

Discrepancie Drawings2.to be read in c prior to comm prior to comm architectural and projec 3. All dimension 3. All dimension 2. 1220 Discrepancies bescale brou 1220 Dotonot Do not scale 5. All dimension prior to commencemen 5. All dimension 50 50 and any disc 3. All dimensions in meters any EQ EQ EQ and EQ EQdisc 4. Do not scale architect. any measu architect. 6. 'RRU :LQGR 6. 'RRU :LQGR 5. All dimensions shall be v VLWH EHIRUH D VLWH EHIRUH D and any discrepancy sh Architect. Dim Architect. Dim DETAIL architect. with Schedul DETAIL A A with Schedul 6. Door / Window opening brought to th brought to th 7. and All levels site(before aftershow pla 7. All levels show levels. Structu Architect. Dimensions of levels. Structu understandin with Schedule of openin understandin Window attention of a Window as as per per brought to the attention of a attention centering wo selection centering wo 7. All levels shown in drawin selection 8. $OO URRI VODEV 8. $OO URRI VODEV levels. Structural levels a KDYH ZDWHUS KDYH ZDWHUS understanding. Any disc engineering engineering recommenda attention of architect pr recommenda All staircases centering9. 9.works All staircases pr 8. All roof slabs,Architects toilets sunk Architects pr have waterproofing / ins engineering consultants LEVELS LEVELS recommendations Parking Parking 9. All staircases headroom floor ArchitectsStilt prior to concr Stilt floor

Window Window as as per selection per selection

10mm thk plaster groove to align with beam top edge.

AD5

beam bottom edge.

PRODUCED BY AN AUTODESK STUDENT VERSION

FIRST FLOOR

W2SD2

10mm thk plaster

FFL +6.35m SFL +6.30m

SD2

Window as Window as per selection. per selection.

groove to align with 10. 10mm thk plaster grooves to be made between finishes beam top edge. and along beam edges as represented. 11. This drawing to be read in conjunction with respective 10mm thk plaster detail drawings. groove Architectural to align with

[ PP 06 [ PP 06 IODW IL[HG IODW IL[HG around the the around periphery at at periphery 50 mm 50 mm offset from offset from finished finished surface. surface. 1133 PRODUCED BY AN AUTODESK STUDENT VERSION

10mm thk plaster groove to align with beam bottom edge.

AD7

PRODUCED BY AN AUTODESK STUDENT VERSION

10mm thk plaster groove to align with beam top edge.

AD5

PRODUCED BY 20 20 25 25 AN AUTODESK STUDENT VERSION

FFL +9.20m SFL +9.15m

SECOND FLOOR

10mm thk plaster groove to align with beam bottom edge.

SD2

AD5

12 12

10mm thk plaster groove to align with beam top edge.

SD2

1133 1133

THIRD FLOOR

Provision for Electrical point for signage.

50 50

beam bottom edge.

FFL +12.05m SFL +12.00m

for for anchorage. anchorage.

Provision for Electrical point 10mm thk plaster groove to align with for signage. 40mm thick plaster beading all around.

12mm 12mm thk thk MS MS

40mmflat thickinserted inserted plasterflat beading into all around. into masonry masonry

10mm thk plaster groove to align with beam top edge.

PRODUCED PRODUCED BY BY AN AN AUTODESK AUTODESK STUDENT STUDENT VERSION VERSION

Provision for Electrical point for signage.

TERRACE LEVEL

HT GLY § PP F F

1250

1250 1250

HT GLY § PP F F HT GLY § PP F F

40mm thick plaster beading FFL +14.90m all around. SFL +14.85m

EQ EQ

Notes : A1.1.

1220 EQ 1220

Window Window as as per per selection. selection.

3. 4. 5.

1670

TERRACE ROOF

50 2.

FFL +18.20m SFL +17.70m

1670

50 850

AS_01

1670

Drawings to be readGin conjunction with relevant F 50 50 architectural and project engineering drawings EQ EQ 01 EQ EQEQ Discrepancies to be broughtAS_01 to the attention of architect 50 prior to commencement of work 50 All dimensions in meters unless otherwise mentionedEQ EQ Do not scale any measurements from the drawings All dimensions shall be verified on site prior to start of work and any discrepancy shall be brought to the notice of the architect. Door / Window openings to be marked precisely at site(before and after plastering) and approved by Architect. Dimensions of openings to be co-ordinated with Schedule of openings. Any discrepancies to be brought to the attention of Architect. All levels shown in drawings are in principle, finished floor levels. Structural levels are indicated only for better understanding. Any discrepancies to be brought to the attention of architect prior to commencement of centering works All roof slabs, toilets sunken areas, decks/balconies to have waterproofing / insulation as per project engineering consultants specifications, boq or Architects' recommendations All staircases headroom dimensions to be approved by Architects prior to concreting

HT GLY § PP F F HT GLY § PP F F HT GLY § PP F F

88 50

F EQ EQ

HT GLY § PP F F 1300 1250 1300

50mm offset50mm from offset from 50mm offset 50mm from offset from A A A finished A wall finished surfaceAwall surface finished wall finished surface wall surface 1670 50mm offset from D C B 50mm offset from EQ EQ finished finished wall wall surface surface

950 950 1133

DEQ D

50 50

AS_01

50 50

Notes Notes ::

Notes :

50mm 50mm offset offset from from finished finished wall wall surface surface

A A

1670 1670

PRODUCED PRODUCED BY AN PRODUCED BY AUTODESK PRODUCED AN AUTODESK BY STUDENT AN BYAUTODESK AN STUDENT AUTODES VERSIO VE ST

Lift opening as per vendor specification

450mm high kerb wall

Sliding partition as per vendor detail

ELEVATION Pg 27 01 A ELEVATION 02 Scale

Dat

PROFESSIONAL TRAINING - SDEG / GITAM UNIVERSITY

Pg 28

2100mm from FFL. Refer Toilet drawing.

850

700

LOBBY

D A

1450

600

650

preparation of this drawing the architect cannot guarantee against human error. The contractor must check all dimensions, Grade conditions and details at site prior to construction. 3. Any discrepency in this or any other drawings related to this drawing shall be brought to the Architect's notice immediately. 4. This drawing must be read in conjunction with related Structural, services drawings and other involved party drawings. 5. All dimensions are in "Millimeters" and levels in "Meters" unless otherwise specified and should be verified by the contractor at site prior to construction. 6. Do not scale any measurements from the drawings. 7. Only written dimensions to be followed.

900

KEY PLAN:

RECEPTION 3.30X8.5M 28sqm

3.3X8.5M L 29sqm

I J

DW01

: Finished Floor Level : Structural Floor Level : Fire Hose Cabinet : As per Site

DW02

450

Existing wall

1300

100mm Masonry upto 2100mm from FFL.

DW01

DW02

2400

4500

DW01

150

7200

2.2X3.7 M 8sqm.

3580

5350

100mm thk plywood partition as per vendor details.

4650 DW03

4650

DW01

Existing wall

DW04

100mm thk plywood partition as per vendor details.

3300 230

2450

3410

DW05

3750

1450

DW05

DW03 DW02

2400

Partition walls to be built to a height of 1000mm from FFL.

2300

3190

3500

F I R E

2350

DW05

F S F A

4750

1200

3150

3700

6X3.7 M 22sqm

MEASUREMENT ROOM

300

75mm thk Dry wall partition system. Existing RCC Columns.

1500

Existing wall BACK OFFICE

20X2.5M 48sqm

DW03

3500

DW04

3500

500

150mm AAC Block Masonry upto 2400mm from FFL with Gypsum partition above.

CARDIO 450

400

500

350

4050

1865

230mm AAC Block Masonry.

4050

2575

3450

Toilet stall partition upto LEGEND : 2100mm from FFL. Refer Toilet drawing.

4050

1450

FFL SSL FHC APS 7

1450

L K

4050

2881

1350

ABBREVIATION :

janitor

DW04

NOTES:

E D

Existing wall Toilet stall partition upto 2100mm from FFL. Refer Toilet drawing.

A' Rev. Date

650

850

Checker Approver

1450

Drawn by 700

Issued as

900

600

janitor

ARCHITECTS

Frosted glass

InFORM ARCHITECTS

Existing wall 3700

#422, 2nd floor, 9th main road, Banashankari II stage, Bengaluru - 560070 P: +91 80 26713360/61/62 STRUCTURE CONSULTANT

Steadfast Structural Consultancy Pvt. Ltd. Branch Ofc.Plot No.572, H No.Mig-5; Road No.-1 Kphb, Kukatpally Hyderabad M: +97017 97186 E: chary@steadfastconsultants.com

Dry Wall Partition Detail

DW05

PLANTER

SCALE 1:100

SEED Engineering Consultants No. 781, First Floor, 9th A Main, 100ft Road, Indira Nagar 1st Stage, Bengaluru - 560038 P: +91 80 41284668 W: www.seedengineering.com

JUICE BAR

# B P

Dry Wall Partition Detail

SCHEMATIC LAYOUT

DRY WALL PARTITION LAYOUT

SCALE 1:100

B R M E

Dry Wall Types

SFL +4900mm

FFL +350mm SFL +300mm

75mm high aluminium skirting.

TOILET

88.5

SIZE

Rev

Dado tiles upto 2400 from FFL as specified in Toilet details drawing.

2 layers of 12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) SECTION on either side. DW02

75mm high aluminium skirting.

150mm thk masonry wall upto 2450mm from SFL.

SCALE 1:40

150mm thk masonry wall upto 2450mm from SFL . 10mm thk mirror with plywood backing.

75mm high aluminium skirting.

SECTION DW03

SECTION DW04

SCALE 1:40

50mm thk stud. 50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill. 110

88.5

Noise & Fire rated sealant.

150mm thk masonry wall upto 2450mm from SFL . 10mm thk mirror with plywood backing.

75mm high aluminium skirting. GYM/RECEPTION

50mm thk stud.

DW02

75mm

DW03

88.5mm

False Ceiling as per false ceiling drawing no. 2 layers of 12.5 mm thk gypsum plaster board (minimum density SECTION DW05 920Kg/m3). 75mm high aluminium skirting.

DW04

75mm

75mm high aluminium skirting on both sides.

DW05

SCALE 1:40

Dry

Masonry wall to be clad with 10mm thk tiles with 15mm thk screed. on the toilet side. Dry wall above 150mm thk masonry wall. 12.5mm thick gypsum plaster board of minimum density 850kg/m3 on both sides of the double stud partition system & one layer of 2-3mm thick Sound deadening membrane on one stud. Both stud filled with 50mm thick rock wool of 48kg/m3 density OR 50mm thk studs 1000 GSM polyester wool. Masonry wall to have 10mm thk mirror with plywood backing upto 2100mm from FFl on 1 or both sides as mentioned in plan. Dry wall above 150mm thk masonry wall. 2 layers of 12.5mm thick gypsum plaster board of minimum density 850kg/m3 on the Gym side and a single layer of the same on the opposite side of the double stud partition system & one layer of 2-3mm thick Sound deadening membrane on one stud. Both stud filled with 50mm thick rock wool of 48kg/m3 density OR 50mm thk studs 1000 GSM polyester wool.

False Ceiling as per false ceiling drawing 2 layers of 12.5mm thick gypsum plaster board of minimum density 850kg/m3 on one no.stud partition system & one layer of 2-3mm thick Sound deadening side of the double

membrane on one stud. Both stud filled with 50mm thick rock wool of 48kg/m3 density OR 50mm thk studs 1000 GSM polyester wool. 10mm thk mirror to be fixed with plywood / flexiply backing (curved surface) upto 2100mm from FFL.

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on 10mm thk mirror to be fixed with plywoodeither backing uptoside. 2100mm from FFl as mentioned in plan. 75mm

12.5mm thick gypsum plaster board of minimum density 850kg/m3 on either sides of the double stud partition system & one layer of 2-3mm thick Sound deadening membrane on one stud. Both stud filled with 50mm thick rock wool of 48kg/m3 density OR 50mm thk studs 1000 GSM polyester wool.

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill.

50mm thk stud.

10mm thk mirror with plywood backing. / flexiply(curved surfaces) for the gym side.

75mm high aluminium skirting. GYM

75mm high aluminium skirting on both sides.

GROUND FLOOR

SECTION DW01 SCALE 1:40

SECTION DW02 SCALE 1:40

PROFESSIONAL TRAINING - SDEG / GITAM UNIVERSITY

TYPES SECTION OF DRY WALL SYSTEMS DW03 SCALE 1:40

N 1 P W

Roof channel

10mm thk mirror with plywood backing. / flexiply(curved surfaces) for the gym side.

2025

NORTH

2400

ISSUE DATE

150mm thk masonry 03/05/21 wall upto 2450mm from SFL as specified.

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill.

Roof channel 4550

110

2400

Bidisha

DRAWING NUMBER

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill.

Dado tiles upto 2400 from FFL as specified in Toilet details drawing.

10mm thk mirror with plywood backing.

False Ceiling as per false ceiling drawing A2 no. R0 1438/INF/KRIS/BF/TD-01 CHECKED

Rakshith

SCALE 1:100

SCALE 1:40

150mm thk masonry wall upto 2450mm from SFL. 2400

2400

150mm thk masonry wall upto 2450mm from SFL as specified.

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill. Noise & Fire rated sealant.

TENDER DRAWING

DRAWN

SECTION DW01

Noise & Fire rated sealant.

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill. Noise & Fire rated sealant.

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill.

75mm

Noise & Fire rated sealant.

2 layers of 12.5 mm thk gypsum plaster board (minimum density 920Kg/m3).

DW01

Description Masonry wall to have 10mm thk mirror with plywood backing upto 2100mm from FFl on 1 or both sides as mentioned in plan. Dry wall above 150mm thk masonry wall. 12.5mm thick gypsum plaster board of minimum density 850kg/m3 on both side of the double stud partition system & one layer of 2-3mm thick Sound deadening membrane on one stud. Both stud filled with 50mm thick rock wool of 48kg/m3 density OR 50mm thk studs 1000 GSM polyester wool.

2025

sealant.

PURPOSE OF ISSUE:

+2750mm

50mm thk rock wool infill of 48kg/m3 density OR 1000 GSM polyester wool infill.

Roof channel

4550

50mm thk stud.

FFL +350mm SFL +300mm

2025

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

2400

50mm thk stud.

infill of 48kg/m3 density OR 1000 GSM polyester

DRAWING TITLE:

wool infill. BASEMENT LEVEL SCHEMATIC PLAN - INTERIORS. Noise & Fire rated

10mm thk mirror with plywood backing.

1350

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

1350

BEAM BOTTOM

False Ceiling as per false ceiling drawing no.

1350

False Ceiling as per false ceiling drawing no.

+4100mm

50mm thk stud.

2025

SCALE 1:100

Lobby Reception Equipments-Usable space Cardio +2750mm Dance / Yoga / Boxing Sled Track Measurement room Back Office Ladies Toilet Ladies Locker Mens Toilet Mens Locker Battery room UPS and IT rack

50mm thk stud.

2400

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

600

BASEMENT LEVEL - SCHEMATIC PLAN - INTERIORS

Roof channel

600

Roof channel

50mm thk stud. Basement floor - Gym 50mm thk rock wool K.R INDOOR STADIUM, Vizag

False Ceiling as per false ceiling drawing no.

Wall Thickness

4350

2 layers of 12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

Roof channel

False Ceiling as per false ceiling drawing no.

4350

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

Roof channel

12.5 mm thk gypsum plaster board (minimum density 920Kg/m3) on either side.

WORK IN PROGRESS 1350

1350

Vizag

PROJECT TITLE:

600

False Ceiling as per false ceiling drawing no.

GITAM University

Programme

Roof channel

False Ceiling as per false ceiling drawing no.

1350

CLIENT:

Roof channel

False Ceiling as per false ceiling drawing no.

FIRST FLOOR

+4100mm

600

Roof channel

600

SFL +4900mm

Wall Detail

SECTION DW04

SECTION DW05

SCALE 1:40

Pg 29

B K

A D

S 1

PROFESSIONAL TRAINING - SDEG / COONOOR HOUSE

Pg 30

PROFESSIONAL TRAINING - SDEG / COONOOR HOUSE

Pg 31

PMECB - INDEPENDENT PROJECT

Pg 32

350

FFL

B ELE

HINGE TO MATCH PANELS.

1347

19mm THK DISCUSSION PLYWOOD FRAME ROOM CABINET AROUND THE WINDOWS. BASE TO BE OFFSET BY 100mm FROM THE EDGES. CABINET MADE OFF 350 19mm THK PLYWOOD AS SPECIFIED.

RAGHU REDDY Cunningham Road, Bangalore, Karnataka

NOTES:

ALIGN

1130/APS 590/APS

2350/APS

STORAGE

F 1 VIEW

F 3 VIEW

VE WINDOW SILL LVL 1:30 TITLE

WORKSTATION UNIT-1 DETAILS

1670/APS 50

1670/APS 340/APS

19mm THK PLYWOOD FRAME AROUND THE WINDOWS. BASE TO BE OFFSET BY 100mm FROM THE EDGES. CABINET MADE OFF 19mm THK PLYWOOD AS SPECIFIED.

19mm THK PLYWOOD PANELS W/ LAMINATE FINISH AS SELECTED.

2350/APS

(CONFERENCE ROOM TV (CONFERENCE UNIT) PLAN ABOVE ROOM TV WINDOW UNIT) PLAN SILL LVL ABOVE 1:30 WINDOW SILL LVL 1:30 F CONFERENCE ROOM TV-UNIT PLANS VIEW

(WORKSTATION UNIT-1) VIEW & ELEVATION - B NTS

6 NOS. OF OPENABLE SHUTTERS OF EQUAL LENGTH. INTERIOR PARTITIONS TO BE DIVIDED ACCORDINGLY.

(CONFERENCE ROOM TV UNIT) PLAN BELOW WINDOW SILL LVL 1:30

ALIGN TO WINDOW EDGE

4 B SEC EQ

STORAGE 5

ALIGN

STORAGE

ALIGN

AB SEC SEC

ALIGN

STORAGE 1

A SEC

2350/APS

NOTES: DRAWINGS ARE NOT TO BE SCALED STORAGE

STORAGE STORAGE

ALL MEASUREMENTS ARE IN MM 1 2 3 1 UNLESS OTHERWISE SPECIFIED

4 2

RECEPTION DESK

F STORAGE STORAGE VIEW 5 3

6 4

ANY DISCREPANCIES IN THE DIMENSIONS/SPECIFICATIONS EQ EQ EQEQ EQEQ EQEQ EQEQ TO BE BROUGHT TO THE ATTENTION (CONFERENCE ROOM TVPRIOR UNIT)TO PLAN BELOW WINDOW SILL LVL 1:30 OF THE ARCHITECT 2350/APS 2350/APS PROCEEDING

OWNER: RAGHU REDDY Cunningham Road, Bangalore, Karnataka

F VIEW

19mm THK PLYWOOD PANELS W/ LAMINATE STORAGE FINISH AS SELECTED. 6 6 NOS. OF OPENABLE EQ EQEQUAL SHUTTERS OF LENGTH. INTERIOR PARTITIONS TO BE DIVIDED ACCORDINGLY.

F VIEW

DRAWN BY RAKSHITH (CONFERENCE ROOM TV (CONFERENCE UNIT) PLAN BELOW ROOM TV WINDOW UNIT) PLAN SILL LVL BELOW 1:30 WINDOW SILL LVL 1:30 TITLE WORKSTATIONCONFERENCE ROOM TV UNIT DETAILS

LOBBY PLANTER STORAGE SHEET SIZE A3 SHEET NO. 006

ALL MEASUREMENTS ARE IN MM

(CONFERENCE ROOM TV (CONFERENCE UNIT) VIEWSEC - ROOM F NTS TV UNIT) VIEW -SEC F NTS

ALIGN

100

STORAGE 5

DRAWINGS ARE NOT TO BE SCALED

ANY DISCREPANCIES IN THE DIMENSIONS/SPECIFICATIONS TO BE BROUGHT TO THE ATTENTION OF THE ARCHITECT PRIOR TO

ALIGN

CABINET MADE 590/APS OFF 19mm THK PLYWOOD AS SPECIFIED.

STORAGE 4

19mm THK PLYWOOD FRAME AROUND 100 THE WINDOWS. BASE TO BE OFFSET BY 100mm FROM THE EDGES.

100

B SEC

100

P M E C B - I N D E P E N DUNLESS E N TOTHERWISE P R OSPECIFIED JECT DRAWN BY RAKSHITH

PLYWOOD PANEL WITH CUTOUT AT 1300mm FROM FFL FOR TV. PAINTED 590/APS AS SPECIFIED.

ALIGN

300

100

400

100

300

590/APS

FLOOR PLAN WITH FURNITURE LAYOUT

SCALE-1:60

OWNER:

SEC

400

100

2350/APS

F KEY PLAN VIEW

(WORKSTATION UNIT-1) VIEW & ELEVATION -AF NTS

F VIEW

WORKSTATION UNIT-2

19mm THK PLYWOOD FRAME AROUND THE WINDOWS. BASE TO BE PLYWOOD OFFSET BYPANEL 100mm WITH AT FROMCUTOUT THE EDGES. 1300mm FROM FFL CABINET MADE FOR TV. PAINTED OFF 19mm THK AS SPECIFIED. PLYWOOD AS SPECIFIED.

1200

1900

590/APS

RECEPTION DESK

1130/APS

400

650

ALIGN

100

1650

(CONFERENCE ROOM TV UNIT) PLAN ABOVE WINDOW SILL LVL 1:30

700 1000

(CONFERENCE ROOM TV UNIT) VIEW - F NTS

BY 100mm FROM THE EDGES.

1300mm FROM FFL FOR TV. PAINTED AS SPECIFIED.

2350/APS

PLYWOOD PANEL 400 1600 WITH CUTOUT AT 2000 1300mm FROM FFL FOR TV. PAINTED WORKSTATION UNIT-1 AS SPECIFIED.

600

300

1600

LOBBY PLANTER STORAGE

ALIGN

300

ALIGN

1130/APS

ALIGN

300

590/APS

1000

SEC

100

600

100

400 400

BY 100mm FROM THE 100 EDGES.

PLYWOOD PANEL

100

TO ALIGN W/ WALL EDGE

100

WITH CUTOUT AT (CONFERENCE ROOM TV (CONFERENCE UNIT) SECTION ROOM - A 1:30 TV UNIT) SECTION - A 1:30

300 300 SILL(CONFERENCE BASE TO BE OFFSET - A 1:30 BASE TO BE OFFSET ROOM TV UNIT) SECTION

SEC SEC

OPENABLE SHUTTER

SECTION-A

19MM THK PLYWOOD W/ LAMINATE FINISH AS 25 SELECTED. 25x25MM MS BOX SECTION B PAINTED AS 1:30 SPECIFIED. SEC

(CONFERENCEAROOM TV UNIT) VIEW - BF NTS B

A SEC

ALIGN

TO ALIGN W/ PARTITION WALL EDGE

B SEC

/ W1NDOW

NW BY 100mm FROM THE SHUTTERS W/ALIG ET TO BIN CAEDGES. CONCEALED

3660

(CONFERENCE ROOM TV UNIT) SECTION - A 1:30

SILL SILL / W1NDOW ALIGN W/ W1NDOW O ALIGN W TO T E IN B A TOP OF C

BINET T OP OF CA

FFL

(WORKSTATION UNIT-1) PLAN AT 1500mm LVL FROM FFL SCALE-1:30

TO ALIGN W/ WINDOW EDGE

STORAGE

STORAGE UNIT

400

BASE TO BE OFFSET A BY 100mm FROM THE SEC F - B 100 (CONFERENCE (CONFERENCE UNIT) SECTION ROOM - B 1:30 TV UNIT) SECTION EDGES. ROOM TV ELE

ALIGN

CONFERENCE ROOM TV UNIT.

2350 / APS

600 25 650

300

BASE TO BE OFFSET TO ALIGN W/ BY 100mm FROM THE WINDOW EDGE EDGES.

TO ALIGN W/ WALL EDGE

FFL

ALIGN

300

400

SILL

19mm THK PLYWOOD PANELS W/ LAMINATE FINISH AS SELECTED.

400

STORAGE WORKSTATION UNIT-2

350

A SEC

400

SECTION-B

TO ALIGN W/ WALL EDGE 1600

400

340/APS

400

400 100

BY 100mm FROM THE 100 EDGES. TOP OF

100

SILL LVL

STORAGE

PLAN AT 1000mm LVL FROM FFL SCALE-1:30

ALIGN SILL LVL

1670/APS

50 25 25

F ELE

400

ALIGN

19mm THK PLYWOOD OPENABLE SHUTTER

ALIGN

SILL LVL

/ W1NDOW

O ALIGN W

ALIGN

FFL

ALIGN

ALIGN T O WINDO W TOP

STORAGE

SCALE-1:30

B SEC

BINET T OP OF CA

SHUTTER TO BE BASE TO BE NOTCHED ONOFFSET TOP AS BY 100mm FROM THE HANDEL. EDGES. 19mm THK PLYWOOD

SHUTTER TO BE 300 NOTCHED ON TOP AS 100 HANDEL. 100 19mm THK PLYWOOD OPENABLE SHUTTER

100

340/APS

STORAGE 19mm THK PLYWOOD PANELS W/ LAMINATE FINISH AS SELECTED.

A B SEC SEC

19mm THK PLYWOOD PANELS W/ LAMINATE FINISH AS SELECTED. 19mm THK PLYWOOD SHUTTER TO BE THE FRAME AROUND NOTCHED ON TOP AS WINDOWS. HANDEL.

19mm THK PLYWOOD FRAME AROUND THE WINDOWS. 100

400

FFL

25x25MM MS BOX SECTION PAINTED AS SPECIFIED.

400

340/APS

SILL LVL

19MM THK PLYWOOD W/ LAMINATE FINISH AS SELECTED.

ALIGN T O WINDO W TOP

19mm THK PLYWOOD OPENABLE SHUTTER

SILL LVL

300 300 TO BE OFFSET - B 1:30 BASE TO BE OFFSET (CONFERENCE ROOM TVBASE UNIT) SECTION OPENABLE

19mm THK PLYWOOD PANELS W/ LAMINATE FINISH AS SELECTED.

LINTEL LVL

ALIGN

2140

SHUTTER FFL TO BE NOTCHED ON TOP AS HANDEL.

ALIGN

LINTEL LVL

ALIGN

BASE TO BE OFFSET BY 100mm FROM THE 600 19mm THK PLYWOOD EDGES. 25 W/ LAMINATE PANELS 650 FINISH AS SELECTED.

THK PLYWOOD PANELS 25 W/ LAMINATE 650 FINISH AS SELECTED.

LVL PLYWOOD ELE 19mm THK PANELS W/ LAMINATE STORAGE FINISH AS SELECTED.PLAN AT 500mm LVL FROM FFL

100

A SEC

25x25MM MS 300 BOX SECTION 100 PAINTED AS SPECIFIED. 100

400

FFL

400

1670/APS 340/APS

1670/APS

PLYWOOD W/ TV LAMINATE FINISH AS SELECTED.

340/APS

TO ALIGN W/ SILL WALL EDGE

STORAGE 19MM THK

600 19mm

2000 600

ALIGN

PANELS W/ LAMINATE WITH CUTOUT AT FINISH AS SELECTED. 1300mm FROM FFL FOR TV. PAINTED BAS SPECIFIED. ELE

WITH CUTOUT AT 1300mm FROM FFL B FOR TV. PAINTED AS 400 ELE SPECIFIED.

350

251300

1300

100

WORKSTATION UNIT-3

1670/APS

400

A SEC

ALIGN TO WINDOW EDGE

700

19MM THK PLYWOOD W/ LAMINATE FINISH AS SELECTED.

1300 ALIGN

PLYWOOD PANEL WITH CUTOUT AT 1300mm FROM FFL FOR TV. PAINTED AS SPECIFIED.

WINDOWS.

100 ALIGN TO WINDO W TOP 19mm THK PLYWOOD PLYWOOD PANEL PLYWOOD PANEL

SILL LVL 19mm THK PLYWOOD FRAME AROUND THE WINDOWS.

B SEC

340/APS

ALIGN TO WINDOW EDGE

1670/APS

25 475

1850

WITH25x25MM CUTOUT AT MS BOX 1300mm FROM FFL SECTION FOR PAINTED TV. PAINTED AS AS 19mm THK PLYWOOD SPECIFIED. SPECIFIED. FRAME AROUND THE

(WORKSTATION UNIT-1) SECTION - A SCALE-1:30

LINTEL LVL

B 1:30

LINTEL LVL

19mm THK PLYWOOD FRAME AROUND THE WINDOWS.

OPENABLE SHUTTERS W/ CONCEALED HINGE TO MATCH PLYWOOD PANELS. PANEL

SEC 19mm THK PLYWOOD FRAME AROUND THE 750mm LVL WINDOWS.

19mm THK PLYWOOD FRAME AROUND THE WINDOWS.

ALIGN LINTEL LVL

1250mm LVL

LINTEL LVL

A SEC

400

1850mm LVL

575

LINTEL LVL

19mm THK PLYWOOD FRAME AROUND THE WINDOWS.

ALIGN TO WINDOW EDGE

GN TO WINDO W TOP

Pg 33

PMECB - INDEPENDENT PROJECT

Pg 34

PMECB - INDEPENDENT PROJECT

Pg 35